powerpc, 5xx: remove support for 5xx

There was for long time no activity in the 5xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 5xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

1 files changed, 0 insertions, 433 deletions

diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c
deleted file mode 100644
index fcae5e0de6..0000000000
--- a/board/mpl/pati/cmd_pati.c
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * Adapted for PATI
- */
-
-#include <common.h>
-#include <command.h>
-#define PLX9056_LOC
-#include "plx9056.h"
-#include "pati.h"
-#include "pci_eeprom.h"
-
-extern void show_pld_regs(void);
-extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
-
-extern void user_led0(int led_on);
-extern void user_led1(int led_on);
-
-/* ------------------------------------------------------------------------- */
-#if defined(CONFIG_SYS_PCI_CON_DEVICE)
-extern void pci_con_disc(void);
-extern void pci_con_connect(void);
-#endif
-
-/******************************************************************************
- * Eeprom Support
- ******************************************************************************/
-unsigned long get32(unsigned long addr)
-{
-	unsigned long *p=(unsigned long *)addr;
-	return *p;
-}
-
-void set32(unsigned long addr,unsigned long data)
-{
-	unsigned long *p=(unsigned long *)addr;
-	*p=data;
-}
-
-#define PCICFG_GET_REG(x)	(get32((x) + PCI_CONFIG_BASE))
-#define PCICFG_SET_REG(x,y)	(set32((x) + PCI_CONFIG_BASE,(y)))
-
-
-/******************************************************************************
- * reload_pci_eeprom
- ******************************************************************************/
-
-static void reload_pci_eeprom(void)
-{
-	unsigned long reg;
-	/* Set Bit 29 and clear it again */
-	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
-	udelay(1);
-	/* set it*/
-	reg|=(1<<29);
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
-	/* EECLK @ 33MHz = 125kHz
-	 * -> extra long load = 32 * 16bit = 512Bit @ 125kHz = 4.1msec
-	 * use 20msec
-	 */
-	udelay(20000); /* wait 20ms */
-	reg &= ~(1<<29); /* set it low */
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
-	udelay(1); /* wait some time */
-}
-
-/******************************************************************************
- * clock_pci_eeprom
- ******************************************************************************/
-
-static void clock_pci_eeprom(void)
-{
-	unsigned long reg;
-	/* clock is low, data is valid */
-	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
-	udelay(1);
-	/* set clck high */
-	reg|=(1<<24);
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
-	udelay(1); /* wait some time */
-	reg &= ~(1<<24); /* set clock low */
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
-	udelay(1); /* wait some time */
-}
-
-/******************************************************************************
- * send_pci_eeprom_cmd
- ******************************************************************************/
-static void send_pci_eeprom_cmd(unsigned long cmd, unsigned char len)
-{
-	unsigned long reg;
-	int i;
-	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
-	/* Clear all EEPROM bits */
-	reg &= ~(0xF << 24);
-	/* Toggle EEPROM's Chip select to get it out of Shift Register Mode */
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
-	udelay(1); /* wait some time */
-	/* Enable EEPROM Chip Select */
-	reg |= (1 << 25);
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
-	/* Send EEPROM command - one bit at a time */
-	for (i = (int)(len-1); i >= 0; i--) {
-		/* Check if current bit is 0 or 1 */
-		if (cmd & (1 << i))
-			PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,(reg | (1<<26)));
-		else
-			PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
-		clock_pci_eeprom();
-	}
-}
-
-/******************************************************************************
- * write_pci_eeprom_offs
- ******************************************************************************/
-static void write_pci_eeprom_offs(unsigned short offset, unsigned short value)
-{
-	unsigned long reg;
-	int bitpos, cmdshft, cmdlen, timeout;
-	/* we're using the Eeprom 93CS66 */
-	cmdshft  = 2;
-	cmdlen = EE66_CMD_LEN;
-	/* Send Write_Enable command to EEPROM */
-	send_pci_eeprom_cmd((EE_WREN << cmdshft),cmdlen);
-	/* Send EEPROM Write command and offset to EEPROM */
-	send_pci_eeprom_cmd((EE_WRITE << cmdshft) | (offset / 2),cmdlen);
-	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
-	/* Clear all EEPROM bits */
-	reg &= ~(0xF << 24);
-	/* Make sure EEDO Input is disabled for some PLX chips */
-	reg &= ~(1 << 31);
-	/* Enable EEPROM Chip Select */
-	reg |= (1 << 25);
-	/* Write 16-bit value to EEPROM - one bit at a time */
-	for (bitpos = 15; bitpos >= 0; bitpos--) {
-		/* Get bit value and shift into result */
-		if (value & (1 << bitpos))
-			PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,(reg | (1<<26)));
-		else
-			PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg );
-		clock_pci_eeprom();
-	} /* for */
-	/* Deselect Chip */
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg & ~(1 << 25));
-	/* Re-select Chip */
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg | (1 << 25));
-	/* A small delay is needed to let EEPROM complete */
-	timeout = 0;
-	do {
-		udelay(10);
-		reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
-		timeout++;
-	} while (((reg & (1 << 27)) == 0) && timeout < 20000);
-	/* Send Write_Disable command to EEPROM */
-	send_pci_eeprom_cmd((EE_WDS << cmdshft),cmdlen);
-	/* Clear Chip Select and all other EEPROM bits */
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg & ~(0xF << 24));
-}
-
-
-/******************************************************************************
- * read_pci_eeprom_offs
- ******************************************************************************/
-static void read_pci_eeprom_offs(unsigned short offset, unsigned short *pvalue)
-{
-	unsigned long reg;
-	int bitpos, cmdshft, cmdlen;
-	/* we're using the Eeprom 93CS66 */
-	cmdshft  = 2;
-	cmdlen = EE66_CMD_LEN;
-	/* Send EEPROM read command and offset to EEPROM */
-	send_pci_eeprom_cmd((EE_READ << cmdshft) | (offset / 2),cmdlen);
-	/* Set EEPROM write output bit */
-	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
-	/* Set EEDO Input enable */
-	reg |= (1 << 31);
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg | (1 << 26));
-	/* Get 16-bit value from EEPROM - one bit at a time */
-	for (bitpos = 0; bitpos < 16; bitpos++) {
-		clock_pci_eeprom();
-		udelay(10);
-		reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
-		/* Get bit value and shift into result */
-		if (reg & (1 << 27))
-			*pvalue = (unsigned short)((*pvalue << 1) | 1);
-		else
-			*pvalue = (unsigned short)(*pvalue << 1);
-	}
-	/* Clear EEDO Input enable */
-	reg &= ~(1 << 31);
-	/* Clear Chip Select and all other EEPROM bits */
-	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg & ~(0xF << 24));
-}
-
-
-/******************************************************************************
- * EEPROM read/writes
-******************************************************************************/
-
-#undef EEPROM_DBG
-static int pati_pci_eeprom_erase(void)
-{
-	int i;
-	printf("Erasing EEPROM ");
-	for( i=0; i < PATI_EEPROM_LAST_OFFSET; i+=2) {
-		write_pci_eeprom_offs(i,0xffff);
-		if((i%0x10))
-			printf(".");
-	}
-	printf("\nDone\n");
-	return 0;
-}
-
-static int pati_pci_eeprom_prg(void)
-{
-	int i;
-	i=0;
-	printf("Programming EEPROM ");
-	while(pati_eeprom[i].offset<0xffff) {
-		write_pci_eeprom_offs(pati_eeprom[i].offset,pati_eeprom[i].value);
-		#ifdef EEPROM_DBG
-		printf("0x%04X: 0x%04X\n",pati_eeprom[i].offset, pati_eeprom[i].value);
-		#else
-		if((i%0x10))
-			printf(".");
-		#endif
-		i++;
-	}
-	printf("\nDone\n");
-	return 0;
-}
-
-static int pati_pci_eeprom_write(unsigned short offset, unsigned long addr, unsigned short size)
-{
-	int i;
-	unsigned short value;
-	unsigned short *buffer =(unsigned short *)addr;
-	if((offset + size) > PATI_EEPROM_LAST_OFFSET) {
-		size = PATI_EEPROM_LAST_OFFSET - offset;
-	}
-	printf("Write To EEPROM from 0x%lX to 0x%X 0x%X words\n", addr, offset, size/2);
-	for( i = offset; i< (offset + size); i+=2) {
-		value = *buffer++;
-		write_pci_eeprom_offs(i,value);
-		#ifdef EEPROM_DBG
-		printf("0x%04X: 0x%04X\n",i, value);
-		#else
-		if((i%0x10))
-			printf(".");
-		#endif
-	}
-	printf("\nDone\n");
-	return 0;
-}
-
-static int pati_pci_eeprom_read(unsigned short offset, unsigned long addr, unsigned short size)
-{
-	int i;
-	unsigned short value = 0;
-	unsigned short *buffer =(unsigned short *)addr;
-	if((offset + size) > PATI_EEPROM_LAST_OFFSET) {
-		size = PATI_EEPROM_LAST_OFFSET - offset;
-	}
-	printf("Read from EEPROM from 0x%X to 0x%lX 0x%X words\n", offset, addr, size/2);
-	for( i = offset; i< (offset + size); i+=2) {
-		read_pci_eeprom_offs(i,&value);
-		*buffer++=value;
-		#ifdef EEPROM_DBG
-		printf("0x%04X: 0x%04X\n",i, value);
-		#else
-		if((i%0x10))
-			printf(".");
-		#endif
-	}
-	printf("\nDone\n");
-	return 0;
-}
-
-/******************************************************************************
- * PCI Bridge Registers Dump
-*******************************************************************************/
-static void display_pci_regs(void)
-{
-	printf(" PCI9056_SPACE0_RANGE     %08lX\n",PCICFG_GET_REG(PCI9056_SPACE0_RANGE));
-	printf(" PCI9056_SPACE0_REMAP     %08lX\n",PCICFG_GET_REG(PCI9056_SPACE0_REMAP));
-	printf(" PCI9056_LOCAL_DMA_ARBIT  %08lX\n",PCICFG_GET_REG(PCI9056_LOCAL_DMA_ARBIT));
-	printf(" PCI9056_ENDIAN_DESC      %08lX\n",PCICFG_GET_REG(PCI9056_ENDIAN_DESC));
-	printf(" PCI9056_EXP_ROM_RANGE    %08lX\n",PCICFG_GET_REG(PCI9056_EXP_ROM_RANGE));
-	printf(" PCI9056_EXP_ROM_REMAP    %08lX\n",PCICFG_GET_REG(PCI9056_EXP_ROM_REMAP));
-	printf(" PCI9056_SPACE0_ROM_DESC  %08lX\n",PCICFG_GET_REG(PCI9056_SPACE0_ROM_DESC));
-	printf(" PCI9056_DM_RANGE         %08lX\n",PCICFG_GET_REG(PCI9056_DM_RANGE));
-	printf(" PCI9056_DM_MEM_BASE      %08lX\n",PCICFG_GET_REG(PCI9056_DM_MEM_BASE));
-	printf(" PCI9056_DM_IO_BASE       %08lX\n",PCICFG_GET_REG(PCI9056_DM_IO_BASE));
-	printf(" PCI9056_DM_PCI_MEM_REMAP %08lX\n",PCICFG_GET_REG(PCI9056_DM_PCI_MEM_REMAP));
-	printf(" PCI9056_DM_PCI_IO_CONFIG %08lX\n",PCICFG_GET_REG(PCI9056_DM_PCI_IO_CONFIG));
-	printf(" PCI9056_SPACE1_RANGE     %08lX\n",PCICFG_GET_REG(PCI9056_SPACE1_RANGE));
-	printf(" PCI9056_SPACE1_REMAP     %08lX\n",PCICFG_GET_REG(PCI9056_SPACE1_REMAP));
-	printf(" PCI9056_SPACE1_DESC      %08lX\n",PCICFG_GET_REG(PCI9056_SPACE1_DESC));
-	printf(" PCI9056_DM_DAC           %08lX\n",PCICFG_GET_REG(PCI9056_DM_DAC));
-	printf(" PCI9056_MAILBOX0         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX0));
-	printf(" PCI9056_MAILBOX1         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX1));
-	printf(" PCI9056_MAILBOX2         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX2));
-	printf(" PCI9056_MAILBOX3         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX3));
-	printf(" PCI9056_MAILBOX4         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX4));
-	printf(" PCI9056_MAILBOX5         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX5));
-	printf(" PCI9056_MAILBOX6         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX6));
-	printf(" PCI9056_MAILBOX7         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX7));
-	printf(" PCI9056_PCI_TO_LOC_DBELL %08lX\n",PCICFG_GET_REG(PCI9056_PCI_TO_LOC_DBELL));
-	printf(" PCI9056_LOC_TO_PCI_DBELL %08lX\n",PCICFG_GET_REG(PCI9056_LOC_TO_PCI_DBELL));
-	printf(" PCI9056_INT_CTRL_STAT    %08lX\n",PCICFG_GET_REG(PCI9056_INT_CTRL_STAT));
-	printf(" PCI9056_EEPROM_CTRL_STAT %08lX\n",PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT));
-	printf(" PCI9056_PERM_VENDOR_ID   %08lX\n",PCICFG_GET_REG(PCI9056_PERM_VENDOR_ID));
-	printf(" PCI9056_REVISION_ID      %08lX\n",PCICFG_GET_REG(PCI9056_REVISION_ID));
-	printf(" \n");
-	printf(" PCI9056_VENDOR_ID        %08lX\n",PCICFG_GET_REG(PCI9056_VENDOR_ID));
-	printf(" PCI9056_COMMAND          %08lX\n",PCICFG_GET_REG(PCI9056_COMMAND));
-	printf(" PCI9056_REVISION         %08lX\n",PCICFG_GET_REG(PCI9056_REVISION));
-	printf(" PCI9056_CACHE_SIZE       %08lX\n",PCICFG_GET_REG(PCI9056_CACHE_SIZE));
-	printf(" PCI9056_RTR_BASE         %08lX\n",PCICFG_GET_REG(PCI9056_RTR_BASE));
-	printf(" PCI9056_RTR_IO_BASE      %08lX\n",PCICFG_GET_REG(PCI9056_RTR_IO_BASE));
-	printf(" PCI9056_LOCAL_BASE0      %08lX\n",PCICFG_GET_REG(PCI9056_LOCAL_BASE0));
-	printf(" PCI9056_LOCAL_BASE1      %08lX\n",PCICFG_GET_REG(PCI9056_LOCAL_BASE1));
-	printf(" PCI9056_UNUSED_BASE1     %08lX\n",PCICFG_GET_REG(PCI9056_UNUSED_BASE1));
-	printf(" PCI9056_UNUSED_BASE2     %08lX\n",PCICFG_GET_REG(PCI9056_UNUSED_BASE2));
-	printf(" PCI9056_CIS_PTR          %08lX\n",PCICFG_GET_REG(PCI9056_CIS_PTR));
-	printf(" PCI9056_SUB_ID           %08lX\n",PCICFG_GET_REG(PCI9056_SUB_ID));
-	printf(" PCI9056_EXP_ROM_BASE     %08lX\n",PCICFG_GET_REG(PCI9056_EXP_ROM_BASE));
-	printf(" PCI9056_CAP_PTR          %08lX\n",PCICFG_GET_REG(PCI9056_CAP_PTR));
-	printf(" PCI9056_INT_LINE         %08lX\n",PCICFG_GET_REG(PCI9056_INT_LINE));
-	printf(" PCI9056_PM_CAP_ID        %08lX\n",PCICFG_GET_REG(PCI9056_PM_CAP_ID));
-	printf(" PCI9056_PM_CSR           %08lX\n",PCICFG_GET_REG(PCI9056_PM_CSR));
-	printf(" PCI9056_HS_CAP_ID        %08lX\n",PCICFG_GET_REG(PCI9056_HS_CAP_ID));
-	printf(" PCI9056_VPD_CAP_ID       %08lX\n",PCICFG_GET_REG(PCI9056_VPD_CAP_ID));
-	printf(" PCI9056_VPD_DATA         %08lX\n",PCICFG_GET_REG(PCI9056_VPD_DATA));
-}
-
-
-int do_pati(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	if (strcmp(argv[1], "info") == 0)
-	{
-		show_pld_regs();
-		return 0;
-	}
-	if (strcmp(argv[1], "pci") == 0)
-	{
-		display_pci_regs();
-		return 0;
-	}
-	if (strcmp(argv[1], "led") == 0)
-	{
-		int led_nr,led_on;
-		led_nr = (int)simple_strtoul(argv[2], NULL, 10);
-		led_on = (int)simple_strtoul(argv[3], NULL, 10);
-		if(!led_nr)
-			user_led0(led_on);
-		else
-			user_led1(led_on);
-		return 0;
-	}
-#if defined(CONFIG_SYS_PCI_CON_DEVICE)
-	if (strcmp(argv[1], "con") == 0) {
-		pci_con_connect();
-		return 0;
-	}
-	if (strcmp(argv[1], "disc") == 0) {
-		pci_con_disc();
-		return 0;
-	}
-#endif
-	if (strcmp(argv[1], "eeprom") == 0) {
-		unsigned long addr;
-		int size, offset;
-		offset = 0;
-		size = PATI_EEPROM_LAST_OFFSET;
-		if(argc>2) {
-			if(argc>3) {
-				addr = simple_strtoul(argv[3], NULL, 16);
-				if(argc>4)
-					offset = (int) simple_strtoul(argv[4], NULL, 16);
-				if(argc>5)
-					size = (int) simple_strtoul(argv[5], NULL, 16);
-				if (strcmp(argv[2], "read") == 0) {
-					return (pati_pci_eeprom_read(offset, addr, size));
-				}
-				if (strcmp(argv[2], "write") == 0) {
-					return (pati_pci_eeprom_write(offset, addr, size));
-				}
-			}
-			if (strcmp(argv[2], "prg") == 0) {
-				return (pati_pci_eeprom_prg());
-			}
-			if (strcmp(argv[2], "era") == 0) {
-				return (pati_pci_eeprom_erase());
-			}
-			if (strcmp(argv[2], "reload") == 0) {
-				reload_pci_eeprom();
-				return 0;
-			}
-
-
-		}
-	}
-
-	return (do_mplcommon(cmdtp, flag, argc, argv));
-}
-
-U_BOOT_CMD(
-	pati,	8,	1,	do_pati,
-	"PATI specific Cmds",
-	"info - displays board information\n"
-	"pati pci  - displays PCI registers\n"
-	"pati led <nr> <on> \n"
-	"          - switch LED <nr> <on>\n"
-	"pati flash mem [SrcAddr]\n"
-	"          - updates U-Boot with image in memory\n"
-	"pati eeprom <cmd> - PCI EEPROM sub-system\n"
-	"    read <addr> <offset> <size>\n"
-	"          - read PCI EEPROM to <addr> from <offset> <size> words\n"
-	"    write <addr> <offset> <size>\n"
-	"          - write PCI EEPROM from <addr> to <offset> <size> words\n"
-	"    prg   - programm PCI EEPROM with default values\n"
-	"    era   - erase PCI EEPROM (write all word to 0xffff)\n"
-	"    reload- Reload PCI Bridge with EEPROM Values\n"
-	"    NOTE: <addr> must start on word boundary\n"
-	"          <offset> and <size> must be even byte values"
-);
-
-/* ------------------------------------------------------------------------- */