Blackfin: Remove

The architecture is currently unmaintained, remove.

Cc: Benjamin Matthews <mben12@gmail.com>
Cc: Chong Huang <chuang@ucrobotics.com>
Cc: Dimitar Penev <dpn@switchfin.org>
Cc: Haitao Zhang <hzhang@ucrobotics.com>
Cc: I-SYST Micromodule <support@i-syst.com>
Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martin Strubel <strubel@section5.ch>
Cc: Peter Meerwald <devel@bct-electronic.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
Cc: Valentin Yakovenkov <yakovenkov@niistt.ru>
Cc: Wojtek Skulski <info@skutek.com>
Cc: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 127 deletions

diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c
deleted file mode 100644
index 185a651bec..0000000000
--- a/board/bf533-stamp/bf533-stamp.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * U-Boot - main board file
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/gpio.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	printf("Board: ADI BF533 Stamp board\n");
-	printf("       Support: http://blackfin.uclinux.org/\n");
-	return 0;
-}
-
-/* PF0 and PF1 are used to switch between the ethernet and flash:
- *         PF0  PF1
- *  flash:  0    0
- *  ether:  1    0
- */
-void swap_to(int device_id)
-{
-	gpio_request(GPIO_PF0, "eth_flash_swap");
-	gpio_request(GPIO_PF1, "eth_flash_swap");
-	gpio_direction_output(GPIO_PF0, device_id == ETHERNET);
-	gpio_direction_output(GPIO_PF1, 0);
-	SSYNC();
-}
-
-#if defined(CONFIG_MISC_INIT_R)
-/* miscellaneous platform dependent initialisations */
-int misc_init_r(void)
-{
-#ifdef CONFIG_STAMP_CF
-	cf_ide_init();
-#endif
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-
-#define CONFIG_LED_STATUS_OFF 0
-#define CONFIG_LED_STATUS_ON  1
-
-static int gpio_setup;
-
-static void stamp_led_set(int LED1, int LED2, int LED3)
-{
-	if (!gpio_setup) {
-		gpio_request(GPIO_PF2, "boot_progress");
-		gpio_request(GPIO_PF3, "boot_progress");
-		gpio_request(GPIO_PF4, "boot_progress");
-		gpio_direction_output(GPIO_PF2, LED1);
-		gpio_direction_output(GPIO_PF3, LED2);
-		gpio_direction_output(GPIO_PF4, LED3);
-		gpio_setup = 1;
-	} else {
-		gpio_set_value(GPIO_PF2, LED1);
-		gpio_set_value(GPIO_PF3, LED2);
-		gpio_set_value(GPIO_PF4, LED3);
-	}
-}
-
-void show_boot_progress(int status)
-{
-	switch (status) {
-	case BOOTSTAGE_ID_CHECK_MAGIC:
-		stamp_led_set(CONFIG_LED_STATUS_OFF, CONFIG_LED_STATUS_OFF,
-			      CONFIG_LED_STATUS_ON);
-		break;
-	case BOOTSTAGE_ID_CHECK_HEADER:
-		stamp_led_set(CONFIG_LED_STATUS_OFF, CONFIG_LED_STATUS_ON,
-			      CONFIG_LED_STATUS_OFF);
-		break;
-	case BOOTSTAGE_ID_CHECK_CHECKSUM:
-		stamp_led_set(CONFIG_LED_STATUS_OFF, CONFIG_LED_STATUS_ON,
-			      CONFIG_LED_STATUS_ON);
-		break;
-	case BOOTSTAGE_ID_CHECK_ARCH:
-		stamp_led_set(CONFIG_LED_STATUS_ON, CONFIG_LED_STATUS_OFF,
-			      CONFIG_LED_STATUS_OFF);
-		break;
-	case BOOTSTAGE_ID_CHECK_IMAGETYPE:
-	case BOOTSTAGE_ID_DECOMP_IMAGE:
-		stamp_led_set(CONFIG_LED_STATUS_ON, CONFIG_LED_STATUS_OFF,
-			      CONFIG_LED_STATUS_ON);
-		break;
-	case BOOTSTAGE_ID_KERNEL_LOADED:
-	case BOOTSTAGE_ID_CHECK_BOOT_OS:
-		stamp_led_set(CONFIG_LED_STATUS_ON, CONFIG_LED_STATUS_ON,
-			      CONFIG_LED_STATUS_OFF);
-		break;
-	case BOOTSTAGE_ID_BOOT_OS_RETURNED:
-	case BOOTSTAGE_ID_RD_MAGIC:
-	case BOOTSTAGE_ID_RD_HDR_CHECKSUM:
-	case BOOTSTAGE_ID_RD_CHECKSUM:
-	case BOOTSTAGE_ID_RAMDISK:
-	case BOOTSTAGE_ID_NO_RAMDISK:
-	case BOOTSTAGE_ID_RUN_OS:
-		stamp_led_set(CONFIG_LED_STATUS_OFF, CONFIG_LED_STATUS_OFF,
-			      CONFIG_LED_STATUS_OFF);
-		break;
-	default:
-		stamp_led_set(CONFIG_LED_STATUS_ON, CONFIG_LED_STATUS_ON,
-			      CONFIG_LED_STATUS_ON);
-		break;
-	}
-}
-#endif
-
-#ifdef CONFIG_SMC91111
-int board_eth_init(bd_t *bis)
-{
-	return smc91111_initialize(0, CONFIG_SMC91111_BASE);
-}
-#endif