summaryrefslogtreecommitdiff
path: root/board/bachmann
diff options
context:
space:
mode:
authorChristian Gmeiner <christian.gmeiner@gmail.com>2015-01-19 17:26:49 +0100
committerStefano Babic <sbabic@denx.de>2015-01-22 11:03:19 +0100
commit532491712610ef903e5f53b1da799fc0011829e0 (patch)
treed1662c31f6734daa063d96023ffd8f07912cedad /board/bachmann
parent68a3664aec94c10213f082dabe4921f556bdc928 (diff)
downloadu-boot-532491712610ef903e5f53b1da799fc0011829e0.tar.gz
ot1200: add basic SPL support
Currently we only support the Micron MT41K128M16JT-125 ddr3 chip. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Diffstat (limited to 'board/bachmann')
-rw-r--r--board/bachmann/ot1200/Makefile4
-rw-r--r--board/bachmann/ot1200/ot1200_spl.c162
2 files changed, 166 insertions, 0 deletions
diff --git a/board/bachmann/ot1200/Makefile b/board/bachmann/ot1200/Makefile
index 1bd42e8321..9e50bfeb86 100644
--- a/board/bachmann/ot1200/Makefile
+++ b/board/bachmann/ot1200/Makefile
@@ -6,4 +6,8 @@
# SPDX-License-Identifier: GPL-2.0+
#
+ifdef CONFIG_SPL_BUILD
+obj-y := ot1200.o ot1200_spl.o
+else
obj-y := ot1200.o
+endif
diff --git a/board/bachmann/ot1200/ot1200_spl.c b/board/bachmann/ot1200/ot1200_spl.c
new file mode 100644
index 0000000000..9c77fd3330
--- /dev/null
+++ b/board/bachmann/ot1200/ot1200_spl.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2015, Bachmann electronic GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/arch/mx6-ddr.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Configure MX6Q/DUAL mmdc DDR io registers */
+static struct mx6dq_iomux_ddr_regs ot1200_ddr_ioregs = {
+ /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 48ohm */
+ .dram_sdclk_0 = 0x00000028,
+ .dram_sdclk_1 = 0x00000028,
+ .dram_cas = 0x00000028,
+ .dram_ras = 0x00000028,
+ .dram_reset = 0x00000028,
+ /* SDCKE[0:1]: 100k pull-up */
+ .dram_sdcke0 = 0x00003000,
+ .dram_sdcke1 = 0x00003000,
+ /* SDBA2: pull-up disabled */
+ .dram_sdba2 = 0x00000000,
+ /* SDODT[0:1]: 100k pull-up, 48 ohm */
+ .dram_sdodt0 = 0x00000028,
+ .dram_sdodt1 = 0x00000028,
+ /* SDQS[0:7]: Differential input, 48 ohm */
+ .dram_sdqs0 = 0x00000028,
+ .dram_sdqs1 = 0x00000028,
+ .dram_sdqs2 = 0x00000028,
+ .dram_sdqs3 = 0x00000028,
+ .dram_sdqs4 = 0x00000028,
+ .dram_sdqs5 = 0x00000028,
+ .dram_sdqs6 = 0x00000028,
+ .dram_sdqs7 = 0x00000028,
+ /* DQM[0:7]: Differential input, 48 ohm */
+ .dram_dqm0 = 0x00000028,
+ .dram_dqm1 = 0x00000028,
+ .dram_dqm2 = 0x00000028,
+ .dram_dqm3 = 0x00000028,
+ .dram_dqm4 = 0x00000028,
+ .dram_dqm5 = 0x00000028,
+ .dram_dqm6 = 0x00000028,
+ .dram_dqm7 = 0x00000028,
+};
+
+/* Configure MX6Q/DUAL mmdc GRP io registers */
+static struct mx6dq_iomux_grp_regs ot1200_grp_ioregs = {
+ /* DDR3 */
+ .grp_ddr_type = 0x000c0000,
+ .grp_ddrmode_ctl = 0x00020000,
+ /* Disable DDR pullups */
+ .grp_ddrpke = 0x00000000,
+ /* ADDR[00:16], SDBA[0:1]: 48 ohm */
+ .grp_addds = 0x00000028,
+ /* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 48 ohm */
+ .grp_ctlds = 0x00000028,
+ /* DATA[00:63]: Differential input, 48 ohm */
+ .grp_ddrmode = 0x00020000,
+ .grp_b0ds = 0x00000028,
+ .grp_b1ds = 0x00000028,
+ .grp_b2ds = 0x00000028,
+ .grp_b3ds = 0x00000028,
+ .grp_b4ds = 0x00000028,
+ .grp_b5ds = 0x00000028,
+ .grp_b6ds = 0x00000028,
+ .grp_b7ds = 0x00000028,
+};
+
+static struct mx6_ddr_sysinfo ot1200_ddr_sysinfo = {
+ /* Width of data bus: 0=16, 1=32, 2=64 */
+ .dsize = 2,
+ /* config for full 4GB range so that get_mem_size() works */
+ .cs_density = 32, /* 32Gb per CS */
+ /* Single chip select */
+ .ncs = 1,
+ .cs1_mirror = 0, /* war 0 */
+ .rtt_wr = 1, /* DDR3_RTT_60_OHM - RTT_Wr = RZQ/4 */
+ .rtt_nom = 1, /* DDR3_RTT_60_OHM - RTT_Nom = RZQ/4 */
+ .walat = 1, /* Write additional latency */
+ .ralat = 5, /* Read additional latency */
+ .mif3_mode = 3, /* Command prediction working mode */
+ .bi_on = 1, /* Bank interleaving enabled */ /* war 1 */
+ .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
+ .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
+};
+
+/* MT41K128M16JT-125 */
+static struct mx6_ddr3_cfg micron_2gib_1600 = {
+ .mem_speed = 1600,
+ .density = 2,
+ .width = 16,
+ .banks = 8,
+ .rowaddr = 14,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1375,
+ .trcmin = 4875,
+ .trasmin = 3500,
+ .SRT = 1,
+};
+
+static struct mx6_mmdc_calibration micron_2gib_1600_mmdc_calib = {
+ /* write leveling calibration determine */
+ .p0_mpwldectrl0 = 0x00260025,
+ .p0_mpwldectrl1 = 0x00270021,
+ .p1_mpwldectrl0 = 0x00180034,
+ .p1_mpwldectrl1 = 0x00180024,
+ /* Read DQS Gating calibration */
+ .p0_mpdgctrl0 = 0x04380344,
+ .p0_mpdgctrl1 = 0x0330032C,
+ .p1_mpdgctrl0 = 0x0338033C,
+ .p1_mpdgctrl1 = 0x032C0300,
+ /* Read Calibration: DQS delay relative to DQ read access */
+ .p0_mprddlctl = 0x3C2E3238,
+ .p1_mprddlctl = 0x3A2E303C,
+ /* Write Calibration: DQ/DM delay relative to DQS write access */
+ .p0_mpwrdlctl = 0x36384036,
+ .p1_mpwrdlctl = 0x442E4438,
+};
+
+static void ot1200_spl_dram_init(void)
+{
+ mx6dq_dram_iocfg(64, &ot1200_ddr_ioregs, &ot1200_grp_ioregs);
+ mx6_dram_cfg(&ot1200_ddr_sysinfo, &micron_2gib_1600_mmdc_calib,
+ &micron_2gib_1600);
+}
+
+/*
+ * called from C runtime startup code (arch/arm/lib/crt0.S:_main)
+ * - we have a stack and a place to store GD, both in SRAM
+ * - no variable global data is available
+ */
+void board_init_f(ulong dummy)
+{
+ /* setup AIPS and disable watchdog */
+ arch_cpu_init();
+
+ /* iomux and setup of i2c */
+ board_early_init_f();
+
+ /* setup GP timer */
+ timer_init();
+
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+
+ /* configure MMDC for SDRAM width/size and per-model calibration */
+ ot1200_spl_dram_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ /* load/boot image from boot device */
+ board_init_r(NULL, 0);
+}
+
+void reset_cpu(ulong addr)
+{
+}