powerpc: remove 4xx support

There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

1 files changed, 0 insertions, 82 deletions

diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c
deleted file mode 100644
index e9df61b7b3..0000000000
--- a/board/amcc/acadia/cmd_acadia.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-
-static u8 boot_267_nor[] = {
-	0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8e, 0x00,
-	0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00
-};
-
-static u8 boot_267_nand[] = {
-	0xd0, 0x38, 0xc3, 0x50, 0x13, 0x88, 0x8e, 0x00,
-	0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00
-};
-
-static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	u8 chip;
-	u8 *buf;
-	int cpu_freq;
-
-	if (argc < 3)
-		return cmd_usage(cmdtp);
-
-	cpu_freq = simple_strtol(argv[1], NULL, 10);
-	if (cpu_freq != 267) {
-		printf("Unsupported cpu-frequency - only 267 supported\n");
-		return 1;
-	}
-
-	/* use 0x50 as I2C EEPROM address for now */
-	chip = 0x50;
-
-	if ((strcmp(argv[2], "nor") != 0) &&
-	    (strcmp(argv[2], "nand") != 0)) {
-		printf("Unsupported boot-device - only nor|nand support\n");
-		return 1;
-	}
-
-	if (strcmp(argv[2], "nand") == 0) {
-		switch (cpu_freq) {
-		case 267:
-			buf = boot_267_nand;
-			break;
-		default:
-			break;
-		}
-	} else {
-		switch (cpu_freq) {
-		case 267:
-			buf = boot_267_nor;
-			break;
-		default:
-			break;
-		}
-	}
-
-	if (i2c_write(chip, 0, 1, buf, 16) != 0)
-		printf("Error writing to EEPROM at address 0x%x\n", chip);
-	udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
-	if (i2c_write(chip, 0x10, 1, buf+16, 4) != 0)
-		printf("Error2 writing to EEPROM at address 0x%x\n", chip);
-
-	printf("Done\n");
-	printf("Please power-cycle the board for the changes to take effect\n");
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	bootstrap,	3,	0,	do_bootstrap,
-	"program the I2C bootstrap EEPROM",
-	"<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM"
-);