diff options
author | Kishon Vijay Abraham I <kishon@ti.com> | 2018-01-30 16:01:39 +0100 |
---|---|---|
committer | Jaehoon Chung <jh80.chung@samsung.com> | 2018-02-19 16:58:55 +0900 |
commit | 6a27333ba36faea7fdfc3fa7ffe8b947f9cb8912 (patch) | |
tree | 0d737067937dcd5449d90d2d493ccb1f6afe49c3 /arch/arm/mach-omap2/omap5 | |
parent | 2d7482cf793fe4d8a98906002708d6e1fa2c5ba3 (diff) | |
download | u-boot-6a27333ba36faea7fdfc3fa7ffe8b947f9cb8912.tar.gz |
ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot
Add a new API to perform iodelay recalibration without isolate
io to be used in uboot.
The data manual of J6/J6 Eco recommends to set different IODELAY values
depending on the mode in which the MMC/SD is enumerated in order to
ensure IO timings are met. The MMC driver can use the new API to
set the IO delay values depending on the MMC mode.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Diffstat (limited to 'arch/arm/mach-omap2/omap5')
-rw-r--r-- | arch/arm/mach-omap2/omap5/dra7xx_iodelay.c | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/omap5/dra7xx_iodelay.c b/arch/arm/mach-omap2/omap5/dra7xx_iodelay.c index 87987308ac..a9a9f75e6e 100644 --- a/arch/arm/mach-omap2/omap5/dra7xx_iodelay.c +++ b/arch/arm/mach-omap2/omap5/dra7xx_iodelay.c @@ -272,3 +272,33 @@ err: __recalibrate_iodelay_end(ret); } + +void late_recalibrate_iodelay(struct pad_conf_entry const *pad, int npads, + struct iodelay_cfg_entry const *iodelay, + int niodelays) +{ + int ret = 0; + + /* unlock IODELAY CONFIG registers */ + writel(CFG_IODELAY_UNLOCK_KEY, (*ctrl)->iodelay_config_base + + CFG_REG_8_OFFSET); + + ret = calibrate_iodelay((*ctrl)->iodelay_config_base); + if (ret) + goto err; + + ret = update_delay_mechanism((*ctrl)->iodelay_config_base); + + /* Configure Mux settings */ + do_set_mux32((*ctrl)->control_padconf_core_base, pad, npads); + + /* Configure Manual IO timing modes */ + ret = do_set_iodelay((*ctrl)->iodelay_config_base, iodelay, niodelays); + if (ret) + goto err; + +err: + /* lock IODELAY CONFIG registers */ + writel(CFG_IODELAY_LOCK_KEY, (*ctrl)->iodelay_config_base + + CFG_REG_8_OFFSET); +} |