imx: reorganize IMX code as other SOCs

Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/<SOC>.

This change is also coherent with the structure in kernel.

Signed-off-by: Stefano Babic <sbabic@denx.de>

CC: Fabio Estevam <fabio.estevam@nxp.com>
CC: Akshay Bhat <akshaybhat@timesys.com>
CC: Ken Lin <Ken.Lin@advantech.com.tw>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Heiko Schocher <hs@denx.de>
CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com>
CC: Christian Gmeiner <christian.gmeiner@gmail.com>
CC: Stefan Roese <sr@denx.de>
CC: Patrick Bruenn <p.bruenn@beckhoff.com>
CC: Troy Kisky <troy.kisky@boundarydevices.com>
CC: Nikita Kiryanov <nikita@compulab.co.il>
CC: Otavio Salvador <otavio@ossystems.com.br>
CC: "Eric Bénard" <eric@eukrea.com>
CC: Jagan Teki <jagan@amarulasolutions.com>
CC: Ye Li <ye.li@nxp.com>
CC: Peng Fan <peng.fan@nxp.com>
CC: Adrian Alonso <adrian.alonso@nxp.com>
CC: Alison Wang <b18965@freescale.com>
CC: Tim Harvey <tharvey@gateworks.com>
CC: Martin Donnelly <martin.donnelly@ge.com>
CC: Marcin Niestroj <m.niestroj@grinn-global.com>
CC: Lukasz Majewski <lukma@denx.de>
CC: Adam Ford <aford173@gmail.com>
CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr>
CC: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Soeren Moch <smoch@web.de>
CC: Richard Hu <richard.hu@technexion.com>
CC: Wig Cheng <wig.cheng@technexion.com>
CC: Vanessa Maegima <vanessa.maegima@nxp.com>
CC: Max Krummenacher <max.krummenacher@toradex.com>
CC: Stefan Agner <stefan.agner@toradex.com>
CC: Markus Niebel <Markus.Niebel@tq-group.com>
CC: Breno Lima <breno.lima@nxp.com>
CC: Francesco Montefoschi <francesco.montefoschi@udoo.org>
CC: Jaehoon Chung <jh80.chung@samsung.com>
CC: Scott Wood <oss@buserror.net>
CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Anatolij Gustschin <agust@denx.de>
CC: Simon Glass <sjg@chromium.org>
CC: "Andrew F. Davis" <afd@ti.com>
CC: "Łukasz Majewski" <l.majewski@samsung.com>
CC: Patrice Chotard <patrice.chotard@st.com>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Hans de Goede <hdegoede@redhat.com>
CC: Masahiro Yamada <yamada.masahiro@socionext.com>
CC: Stephen Warren <swarren@nvidia.com>
CC: Andre Przywara <andre.przywara@arm.com>
CC: "Álvaro Fernández Rojas" <noltari@gmail.com>
CC: York Sun <york.sun@nxp.com>
CC: Xiaoliang Yang <xiaoliang.yang@nxp.com>
CC: Chen-Yu Tsai <wens@csie.org>
CC: George McCollister <george.mccollister@gmail.com>
CC: Sven Ebenfeld <sven.ebenfeld@gmail.com>
CC: Filip Brozovic <fbrozovic@gmail.com>
CC: Petr Kulhavy <brain@jikos.cz>
CC: Eric Nelson <eric@nelint.com>
CC: Bai Ping <ping.bai@nxp.com>
CC: Anson Huang <Anson.Huang@nxp.com>
CC: Sanchayan Maity <maitysanchayan@gmail.com>
CC: Lokesh Vutla <lokeshvutla@ti.com>
CC: Patrick Delaunay <patrick.delaunay@st.com>
CC: Gary Bisson <gary.bisson@boundarydevices.com>
CC: Alexander Graf <agraf@suse.de>
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

1 files changed, 703 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c
new file mode 100644
index 0000000000..af316735ee
--- /dev/null
+++ b/arch/arm/mach-imx/mx6/soc.c
@@ -0,0 +1,703 @@
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/dma.h>
+#include <asm/mach-imx/hab.h>
+#include <stdbool.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/arch/crm_regs.h>
+#include <dm.h>
+#include <imx_thermal.h>
+#include <mmc.h>
+
+enum ldo_reg {
+	LDO_ARM,
+	LDO_SOC,
+	LDO_PU,
+};
+
+struct scu_regs {
+	u32	ctrl;
+	u32	config;
+	u32	status;
+	u32	invalidate;
+	u32	fpga_rev;
+};
+
+#if defined(CONFIG_IMX_THERMAL)
+static const struct imx_thermal_plat imx6_thermal_plat = {
+	.regs = (void *)ANATOP_BASE_ADDR,
+	.fuse_bank = 1,
+	.fuse_word = 6,
+};
+
+U_BOOT_DEVICE(imx6_thermal) = {
+	.name = "imx_thermal",
+	.platdata = &imx6_thermal_plat,
+};
+#endif
+
+#if defined(CONFIG_SECURE_BOOT)
+struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
+	.bank = 0,
+	.word = 6,
+};
+#endif
+
+u32 get_nr_cpus(void)
+{
+	struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
+	return readl(&scu->config) & 3;
+}
+
+u32 get_cpu_rev(void)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	u32 reg = readl(&anatop->digprog_sololite);
+	u32 type = ((reg >> 16) & 0xff);
+	u32 major, cfg = 0;
+
+	if (type != MXC_CPU_MX6SL) {
+		reg = readl(&anatop->digprog);
+		struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
+		cfg = readl(&scu->config) & 3;
+		type = ((reg >> 16) & 0xff);
+		if (type == MXC_CPU_MX6DL) {
+			if (!cfg)
+				type = MXC_CPU_MX6SOLO;
+		}
+
+		if (type == MXC_CPU_MX6Q) {
+			if (cfg == 1)
+				type = MXC_CPU_MX6D;
+		}
+
+	}
+	major = ((reg >> 8) & 0xff);
+	if ((major >= 1) &&
+	    ((type == MXC_CPU_MX6Q) || (type == MXC_CPU_MX6D))) {
+		major--;
+		type = MXC_CPU_MX6QP;
+		if (cfg == 1)
+			type = MXC_CPU_MX6DP;
+	}
+	reg &= 0xff;		/* mx6 silicon revision */
+	return (type << 12) | (reg + (0x10 * (major + 1)));
+}
+
+/*
+ * OCOTP_CFG3[17:16] (see Fusemap Description Table offset 0x440)
+ * defines a 2-bit SPEED_GRADING
+ */
+#define OCOTP_CFG3_SPEED_SHIFT	16
+#define OCOTP_CFG3_SPEED_800MHZ	0
+#define OCOTP_CFG3_SPEED_850MHZ	1
+#define OCOTP_CFG3_SPEED_1GHZ	2
+#define OCOTP_CFG3_SPEED_1P2GHZ	3
+
+/*
+ * For i.MX6UL
+ */
+#define OCOTP_CFG3_SPEED_528MHZ 1
+#define OCOTP_CFG3_SPEED_696MHZ 2
+
+u32 get_cpu_speed_grade_hz(void)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[0];
+	struct fuse_bank0_regs *fuse =
+		(struct fuse_bank0_regs *)bank->fuse_regs;
+	uint32_t val;
+
+	val = readl(&fuse->cfg3);
+	val >>= OCOTP_CFG3_SPEED_SHIFT;
+	val &= 0x3;
+
+	if (is_mx6ul() || is_mx6ull()) {
+		if (val == OCOTP_CFG3_SPEED_528MHZ)
+			return 528000000;
+		else if (val == OCOTP_CFG3_SPEED_696MHZ)
+			return 69600000;
+		else
+			return 0;
+	}
+
+	switch (val) {
+	/* Valid for IMX6DQ */
+	case OCOTP_CFG3_SPEED_1P2GHZ:
+		if (is_mx6dq() || is_mx6dqp())
+			return 1200000000;
+	/* Valid for IMX6SX/IMX6SDL/IMX6DQ */
+	case OCOTP_CFG3_SPEED_1GHZ:
+		return 996000000;
+	/* Valid for IMX6DQ */
+	case OCOTP_CFG3_SPEED_850MHZ:
+		if (is_mx6dq() || is_mx6dqp())
+			return 852000000;
+	/* Valid for IMX6SX/IMX6SDL/IMX6DQ */
+	case OCOTP_CFG3_SPEED_800MHZ:
+		return 792000000;
+	}
+	return 0;
+}
+
+/*
+ * OCOTP_MEM0[7:6] (see Fusemap Description Table offset 0x480)
+ * defines a 2-bit Temperature Grade
+ *
+ * return temperature grade and min/max temperature in Celsius
+ */
+#define OCOTP_MEM0_TEMP_SHIFT          6
+
+u32 get_cpu_temp_grade(int *minc, int *maxc)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[1];
+	struct fuse_bank1_regs *fuse =
+		(struct fuse_bank1_regs *)bank->fuse_regs;
+	uint32_t val;
+
+	val = readl(&fuse->mem0);
+	val >>= OCOTP_MEM0_TEMP_SHIFT;
+	val &= 0x3;
+
+	if (minc && maxc) {
+		if (val == TEMP_AUTOMOTIVE) {
+			*minc = -40;
+			*maxc = 125;
+		} else if (val == TEMP_INDUSTRIAL) {
+			*minc = -40;
+			*maxc = 105;
+		} else if (val == TEMP_EXTCOMMERCIAL) {
+			*minc = -20;
+			*maxc = 105;
+		} else {
+			*minc = 0;
+			*maxc = 95;
+		}
+	}
+	return val;
+}
+
+#ifdef CONFIG_REVISION_TAG
+u32 __weak get_board_rev(void)
+{
+	u32 cpurev = get_cpu_rev();
+	u32 type = ((cpurev >> 12) & 0xff);
+	if (type == MXC_CPU_MX6SOLO)
+		cpurev = (MXC_CPU_MX6DL) << 12 | (cpurev & 0xFFF);
+
+	if (type == MXC_CPU_MX6D)
+		cpurev = (MXC_CPU_MX6Q) << 12 | (cpurev & 0xFFF);
+
+	return cpurev;
+}
+#endif
+
+static void clear_ldo_ramp(void)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	int reg;
+
+	/* ROM may modify LDO ramp up time according to fuse setting, so in
+	 * order to be in the safe side we neeed to reset these settings to
+	 * match the reset value: 0'b00
+	 */
+	reg = readl(&anatop->ana_misc2);
+	reg &= ~(0x3f << 24);
+	writel(reg, &anatop->ana_misc2);
+}
+
+/*
+ * Set the PMU_REG_CORE register
+ *
+ * Set LDO_SOC/PU/ARM regulators to the specified millivolt level.
+ * Possible values are from 0.725V to 1.450V in steps of
+ * 0.025V (25mV).
+ */
+static int set_ldo_voltage(enum ldo_reg ldo, u32 mv)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	u32 val, step, old, reg = readl(&anatop->reg_core);
+	u8 shift;
+
+	if (mv < 725)
+		val = 0x00;	/* Power gated off */
+	else if (mv > 1450)
+		val = 0x1F;	/* Power FET switched full on. No regulation */
+	else
+		val = (mv - 700) / 25;
+
+	clear_ldo_ramp();
+
+	switch (ldo) {
+	case LDO_SOC:
+		shift = 18;
+		break;
+	case LDO_PU:
+		shift = 9;
+		break;
+	case LDO_ARM:
+		shift = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	old = (reg & (0x1F << shift)) >> shift;
+	step = abs(val - old);
+	if (step == 0)
+		return 0;
+
+	reg = (reg & ~(0x1F << shift)) | (val << shift);
+	writel(reg, &anatop->reg_core);
+
+	/*
+	 * The LDO ramp-up is based on 64 clock cycles of 24 MHz = 2.6 us per
+	 * step
+	 */
+	udelay(3 * step);
+
+	return 0;
+}
+
+static void set_ahb_rate(u32 val)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	u32 reg, div;
+
+	div = get_periph_clk() / val - 1;
+	reg = readl(&mxc_ccm->cbcdr);
+
+	writel((reg & (~MXC_CCM_CBCDR_AHB_PODF_MASK)) |
+		(div << MXC_CCM_CBCDR_AHB_PODF_OFFSET), &mxc_ccm->cbcdr);
+}
+
+static void clear_mmdc_ch_mask(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	u32 reg;
+	reg = readl(&mxc_ccm->ccdr);
+
+	/* Clear MMDC channel mask */
+	if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl())
+		reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK);
+	else
+		reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
+	writel(reg, &mxc_ccm->ccdr);
+}
+
+#define OCOTP_MEM0_REFTOP_TRIM_SHIFT          8
+
+static void init_bandgap(void)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[1];
+	struct fuse_bank1_regs *fuse =
+		(struct fuse_bank1_regs *)bank->fuse_regs;
+	uint32_t val;
+
+	/*
+	 * Ensure the bandgap has stabilized.
+	 */
+	while (!(readl(&anatop->ana_misc0) & 0x80))
+		;
+	/*
+	 * For best noise performance of the analog blocks using the
+	 * outputs of the bandgap, the reftop_selfbiasoff bit should
+	 * be set.
+	 */
+	writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set);
+	/*
+	 * On i.MX6ULL,we need to set VBGADJ bits according to the
+	 * REFTOP_TRIM[3:0] in fuse table
+	 *	000 - set REFTOP_VBGADJ[2:0] to 3b'110,
+	 *	110 - set REFTOP_VBGADJ[2:0] to 3b'000,
+	 *	001 - set REFTOP_VBGADJ[2:0] to 3b'001,
+	 *	010 - set REFTOP_VBGADJ[2:0] to 3b'010,
+	 *	011 - set REFTOP_VBGADJ[2:0] to 3b'011,
+	 *	100 - set REFTOP_VBGADJ[2:0] to 3b'100,
+	 *	101 - set REFTOP_VBGADJ[2:0] to 3b'101,
+	 *	111 - set REFTOP_VBGADJ[2:0] to 3b'111,
+	 */
+	if (is_mx6ull()) {
+		val = readl(&fuse->mem0);
+		val >>= OCOTP_MEM0_REFTOP_TRIM_SHIFT;
+		val &= 0x7;
+
+		writel(val << BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ_SHIFT,
+		       &anatop->ana_misc0_set);
+	}
+}
+
+#ifdef CONFIG_MX6SL
+static void set_preclk_from_osc(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	u32 reg;
+
+	reg = readl(&mxc_ccm->cscmr1);
+	reg |= MXC_CCM_CSCMR1_PER_CLK_SEL_MASK;
+	writel(reg, &mxc_ccm->cscmr1);
+}
+#endif
+
+int arch_cpu_init(void)
+{
+	init_aips();
+
+	/* Need to clear MMDC_CHx_MASK to make warm reset work. */
+	clear_mmdc_ch_mask();
+
+	/*
+	 * Disable self-bias circuit in the analog bandap.
+	 * The self-bias circuit is used by the bandgap during startup.
+	 * This bit should be set after the bandgap has initialized.
+	 */
+	init_bandgap();
+
+	if (!is_mx6ul() && !is_mx6ull()) {
+		/*
+		 * When low freq boot is enabled, ROM will not set AHB
+		 * freq, so we need to ensure AHB freq is 132MHz in such
+		 * scenario.
+		 *
+		 * To i.MX6UL, when power up, default ARM core and
+		 * AHB rate is 396M and 132M.
+		 */
+		if (mxc_get_clock(MXC_ARM_CLK) == 396000000)
+			set_ahb_rate(132000000);
+	}
+
+	if (is_mx6ul()) {
+		if (is_soc_rev(CHIP_REV_1_0) == 0) {
+			/*
+			 * According to the design team's requirement on
+			 * i.MX6UL,the PMIC_STBY_REQ PAD should be configured
+			 * as open drain 100K (0x0000b8a0).
+			 * Only exists on TO1.0
+			 */
+			writel(0x0000b8a0, IOMUXC_BASE_ADDR + 0x29c);
+		} else {
+			/*
+			 * From TO1.1, SNVS adds internal pull up control
+			 * for POR_B, the register filed is GPBIT[1:0],
+			 * after system boot up, it can be set to 2b'01
+			 * to disable internal pull up.It can save about
+			 * 30uA power in SNVS mode.
+			 */
+			writel((readl(MX6UL_SNVS_LP_BASE_ADDR + 0x10) &
+			       (~0x1400)) | 0x400,
+			       MX6UL_SNVS_LP_BASE_ADDR + 0x10);
+		}
+	}
+
+	if (is_mx6ull()) {
+		/*
+		 * GPBIT[1:0] is suggested to set to 2'b11:
+		 * 2'b00 : always PUP100K
+		 * 2'b01 : PUP100K when PMIC_ON_REQ or SOC_NOT_FAIL
+		 * 2'b10 : always disable PUP100K
+		 * 2'b11 : PDN100K when SOC_FAIL, PUP100K when SOC_NOT_FAIL
+		 * register offset is different from i.MX6UL, since
+		 * i.MX6UL is fixed by ECO.
+		 */
+		writel(readl(MX6UL_SNVS_LP_BASE_ADDR) |
+			0x3, MX6UL_SNVS_LP_BASE_ADDR);
+	}
+
+	/* Set perclk to source from OSC 24MHz */
+#if defined(CONFIG_MX6SL)
+	set_preclk_from_osc();
+#endif
+
+	imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
+
+	init_src();
+
+	return 0;
+}
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+__weak int board_mmc_get_env_dev(int devno)
+{
+	return CONFIG_SYS_MMC_ENV_DEV;
+}
+
+static int mmc_get_boot_dev(void)
+{
+	struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+	u32 soc_sbmr = readl(&src_regs->sbmr1);
+	u32 bootsel;
+	int devno;
+
+	/*
+	 * Refer to
+	 * "i.MX 6Dual/6Quad Applications Processor Reference Manual"
+	 * Chapter "8.5.3.1 Expansion Device eFUSE Configuration"
+	 * i.MX6SL/SX/UL has same layout.
+	 */
+	bootsel = (soc_sbmr & 0x000000FF) >> 6;
+
+	/* No boot from sd/mmc */
+	if (bootsel != 1)
+		return -1;
+
+	/* BOOT_CFG2[3] and BOOT_CFG2[4] */
+	devno = (soc_sbmr & 0x00001800) >> 11;
+
+	return devno;
+}
+
+int mmc_get_env_dev(void)
+{
+	int devno = mmc_get_boot_dev();
+
+	/* If not boot from sd/mmc, use default value */
+	if (devno < 0)
+		return CONFIG_SYS_MMC_ENV_DEV;
+
+	return board_mmc_get_env_dev(devno);
+}
+
+#ifdef CONFIG_SYS_MMC_ENV_PART
+__weak int board_mmc_get_env_part(int devno)
+{
+	return CONFIG_SYS_MMC_ENV_PART;
+}
+
+uint mmc_get_env_part(struct mmc *mmc)
+{
+	int devno = mmc_get_boot_dev();
+
+	/* If not boot from sd/mmc, use default value */
+	if (devno < 0)
+		return CONFIG_SYS_MMC_ENV_PART;
+
+	return board_mmc_get_env_part(devno);
+}
+#endif
+#endif
+
+int board_postclk_init(void)
+{
+	set_ldo_voltage(LDO_SOC, 1175);	/* Set VDDSOC to 1.175V */
+
+	return 0;
+}
+
+#if defined(CONFIG_FEC_MXC)
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[4];
+	struct fuse_bank4_regs *fuse =
+			(struct fuse_bank4_regs *)bank->fuse_regs;
+
+	if ((is_mx6sx() || is_mx6ul() || is_mx6ull()) && dev_id == 1) {
+		u32 value = readl(&fuse->mac_addr2);
+		mac[0] = value >> 24 ;
+		mac[1] = value >> 16 ;
+		mac[2] = value >> 8 ;
+		mac[3] = value ;
+
+		value = readl(&fuse->mac_addr1);
+		mac[4] = value >> 24 ;
+		mac[5] = value >> 16 ;
+		
+	} else {
+		u32 value = readl(&fuse->mac_addr1);
+		mac[0] = (value >> 8);
+		mac[1] = value ;
+
+		value = readl(&fuse->mac_addr0);
+		mac[2] = value >> 24 ;
+		mac[3] = value >> 16 ;
+		mac[4] = value >> 8 ;
+		mac[5] = value ;
+	}
+
+}
+#endif
+
+/*
+ * cfg_val will be used for
+ * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
+ * After reset, if GPR10[28] is 1, ROM will use GPR9[25:0]
+ * instead of SBMR1 to determine the boot device.
+ */
+const struct boot_mode soc_boot_modes[] = {
+	{"normal",	MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
+	/* reserved value should start rom usb */
+#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
+	{"usb",		MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)},
+#else
+	{"usb",		MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)},
+#endif
+	{"sata",	MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)},
+	{"ecspi1:0",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)},
+	{"ecspi1:1",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)},
+	{"ecspi1:2",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)},
+	{"ecspi1:3",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)},
+	/* 4 bit bus width */
+	{"esdhc1",	MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
+	{"esdhc2",	MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+	{"esdhc3",	MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+	{"esdhc4",	MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
+	{NULL,		0},
+};
+
+void reset_misc(void)
+{
+#ifdef CONFIG_VIDEO_MXS
+	lcdif_power_down();
+#endif
+}
+
+void s_init(void)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	u32 mask480;
+	u32 mask528;
+	u32 reg, periph1, periph2;
+
+	if (is_mx6sx() || is_mx6ul() || is_mx6ull())
+		return;
+
+	/* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs
+	 * to make sure PFD is working right, otherwise, PFDs may
+	 * not output clock after reset, MX6DL and MX6SL have added 396M pfd
+	 * workaround in ROM code, as bus clock need it
+	 */
+
+	mask480 = ANATOP_PFD_CLKGATE_MASK(0) |
+		ANATOP_PFD_CLKGATE_MASK(1) |
+		ANATOP_PFD_CLKGATE_MASK(2) |
+		ANATOP_PFD_CLKGATE_MASK(3);
+	mask528 = ANATOP_PFD_CLKGATE_MASK(1) |
+		ANATOP_PFD_CLKGATE_MASK(3);
+
+	reg = readl(&ccm->cbcmr);
+	periph2 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK)
+		>> MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET);
+	periph1 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK)
+		>> MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET);
+
+	/* Checking if PLL2 PFD0 or PLL2 PFD2 is using for periph clock */
+	if ((periph2 != 0x2) && (periph1 != 0x2))
+		mask528 |= ANATOP_PFD_CLKGATE_MASK(0);
+
+	if ((periph2 != 0x1) && (periph1 != 0x1) &&
+		(periph2 != 0x3) && (periph1 != 0x3))
+		mask528 |= ANATOP_PFD_CLKGATE_MASK(2);
+
+	writel(mask480, &anatop->pfd_480_set);
+	writel(mask528, &anatop->pfd_528_set);
+	writel(mask480, &anatop->pfd_480_clr);
+	writel(mask528, &anatop->pfd_528_clr);
+}
+
+#ifdef CONFIG_IMX_HDMI
+void imx_enable_hdmi_phy(void)
+{
+	struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+	u8 reg;
+	reg = readb(&hdmi->phy_conf0);
+	reg |= HDMI_PHY_CONF0_PDZ_MASK;
+	writeb(reg, &hdmi->phy_conf0);
+	udelay(3000);
+	reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
+	writeb(reg, &hdmi->phy_conf0);
+	udelay(3000);
+	reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
+	writeb(reg, &hdmi->phy_conf0);
+	writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz);
+}
+
+void imx_setup_hdmi(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	struct hdmi_regs *hdmi  = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+	int reg, count;
+	u8 val;
+
+	/* Turn on HDMI PHY clock */
+	reg = readl(&mxc_ccm->CCGR2);
+	reg |=  MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK|
+		 MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK;
+	writel(reg, &mxc_ccm->CCGR2);
+	writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz);
+	reg = readl(&mxc_ccm->chsccdr);
+	reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK|
+		 MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK|
+		 MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
+	reg |= (CHSCCDR_PODF_DIVIDE_BY_3
+		 << MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
+		 |(CHSCCDR_IPU_PRE_CLK_540M_PFD
+		 << MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
+	writel(reg, &mxc_ccm->chsccdr);
+
+	/* Clear the overflow condition */
+	if (readb(&hdmi->ih_fc_stat2) & HDMI_IH_FC_STAT2_OVERFLOW_MASK) {
+		/* TMDS software reset */
+		writeb((u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ, &hdmi->mc_swrstz);
+		val = readb(&hdmi->fc_invidconf);
+		/* Need minimum 3 times to write to clear the register */
+		for (count = 0 ; count < 5 ; count++)
+			writeb(val, &hdmi->fc_invidconf);
+	}
+}
+#endif
+
+#ifdef CONFIG_IMX_BOOTAUX
+int arch_auxiliary_core_up(u32 core_id, u32 boot_private_data)
+{
+	struct src *src_reg;
+	u32 stack, pc;
+
+	if (!boot_private_data)
+		return -EINVAL;
+
+	stack = *(u32 *)boot_private_data;
+	pc = *(u32 *)(boot_private_data + 4);
+
+	/* Set the stack and pc to M4 bootROM */
+	writel(stack, M4_BOOTROM_BASE_ADDR);
+	writel(pc, M4_BOOTROM_BASE_ADDR + 4);
+
+	/* Enable M4 */
+	src_reg = (struct src *)SRC_BASE_ADDR;
+	clrsetbits_le32(&src_reg->scr, SRC_SCR_M4C_NON_SCLR_RST_MASK,
+			SRC_SCR_M4_ENABLE_MASK);
+
+	return 0;
+}
+
+int arch_auxiliary_core_check_up(u32 core_id)
+{
+	struct src *src_reg = (struct src *)SRC_BASE_ADDR;
+	unsigned val;
+
+	val = readl(&src_reg->scr);
+
+	if (val & SRC_SCR_M4C_NON_SCLR_RST_MASK)
+		return 0;  /* assert in reset */
+
+	return 1;
+}
+#endif