Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  M28: Cleanup memsize.o OOT build
  i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28
  M28: Fix typo
  M28: Document that units has to be set to sectors on SD bootcard
  i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board
  i.mx: mxc_gpio: add the i.mx6q support
  i.mx: add the initial support for freescale i.MX6Q processor
  i.mx: introduce the armv7/imx-common folder
  S5PC2XX: Rename S5pc2XX to exynos
  tegra2: Don't use board pointer before it is set up
  tegra2: Remove unneeded 'dynamic ram size' message
  tegra2: Remove unused low-level Tegra2 UART code
  tegra2: Remove unneeded config option
  tegra2: Remove unneeded boot code
  tegra2: Enable instruction cache
  arm: Move CP15 init out of cpu_init_crit()
  tegra2: Simplify tegra_start() boot path
  tegra2: Add arch_cpu_init() to fire up Cortex-A9
  tegra2: Use new GPIO APIs in gpio_config_uart()
  tegra2: Add support for Ventana
  tegra2: Modify MMC driver to handle power and cd GPIOs
  tegra2: Move board_mmc_init into board files

1 files changed, 103 insertions, 0 deletions

diff --git a/arch/arm/include/asm/arch-mx6/iomux-v3.h b/arch/arm/include/asm/arch-mx6/iomux-v3.h
new file mode 100644
index 0000000000..4558f4fba2
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/iomux-v3.h
@@ -0,0 +1,103 @@
+/*
+ * Based on Linux i.MX iomux-v3.h file:
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *			<armlinux@phytec.de>
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_V3_H__
+#define __MACH_IOMUX_V3_H__
+
+/*
+ *	build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ *   things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ *   (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ *   (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is SOC_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ *
+ * IOMUX/PAD Bit field definitions
+ *
+ * MUX_CTRL_OFS:	    0..11 (12)
+ * PAD_CTRL_OFS:	   12..23 (12)
+ * SEL_INPUT_OFS:	   24..35 (12)
+ * MUX_MODE + SION:	   36..40  (5)
+ * PAD_CTRL + NO_PAD_CTRL: 41..58 (18)
+ * SEL_INP:		   59..62  (4)
+ * reserved:		     63    (1)
+*/
+
+typedef u64 iomux_v3_cfg_t;
+
+#define MUX_CTRL_OFS_SHIFT	0
+#define MUX_CTRL_OFS_MASK	((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT)
+#define MUX_PAD_CTRL_OFS_SHIFT	12
+#define MUX_PAD_CTRL_OFS_MASK	((iomux_v3_cfg_t)0xfff << \
+	MUX_PAD_CTRL_OFS_SHIFT)
+#define MUX_SEL_INPUT_OFS_SHIFT	24
+#define MUX_SEL_INPUT_OFS_MASK	((iomux_v3_cfg_t)0xfff << \
+	MUX_SEL_INPUT_OFS_SHIFT)
+
+#define MUX_MODE_SHIFT		36
+#define MUX_MODE_MASK		((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
+#define MUX_PAD_CTRL_SHIFT	41
+#define MUX_PAD_CTRL_MASK	((iomux_v3_cfg_t)0x3ffff << MUX_PAD_CTRL_SHIFT)
+#define MUX_SEL_INPUT_SHIFT	59
+#define MUX_SEL_INPUT_MASK	((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
+
+#define MUX_PAD_CTRL(x)		((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
+
+#define IOMUX_PAD(pad_ctrl_ofs, mux_ctrl_ofs, mux_mode, sel_input_ofs,	\
+		sel_input, pad_ctrl)					\
+	(((iomux_v3_cfg_t)(mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT)     |	\
+	((iomux_v3_cfg_t)(mux_mode)      << MUX_MODE_SHIFT)         |	\
+	((iomux_v3_cfg_t)(pad_ctrl_ofs)  << MUX_PAD_CTRL_OFS_SHIFT) |	\
+	((iomux_v3_cfg_t)(pad_ctrl)      << MUX_PAD_CTRL_SHIFT)     |	\
+	((iomux_v3_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)|	\
+	((iomux_v3_cfg_t)(sel_input)     << MUX_SEL_INPUT_SHIFT))
+
+#define NO_PAD_CTRL		(1 << 17)
+#define GPIO_PIN_MASK		0x1f
+#define GPIO_PORT_SHIFT		5
+#define GPIO_PORT_MASK		(0x7 << GPIO_PORT_SHIFT)
+#define GPIO_PORTA		(0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB		(1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC		(2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD		(3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE		(4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF		(5 << GPIO_PORT_SHIFT)
+
+#define MUX_CONFIG_SION		(0x1 << 4)
+
+int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
+int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
+
+#endif	/* __MACH_IOMUX_V3_H__*/