ARM: tegra: remove "0, " from DT unit addresses

Apparently the unit address in a DT node name is now supposed to be a
single integer value, rather than a comma-separated list of individual
cell values. Fix the U-Boot DTs to comply with this naming convention.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

1 files changed, 24 insertions, 24 deletions

diff --git a/arch/arm/dts/tegra210-p2571.dts b/arch/arm/dts/tegra210-p2571.dts
index d2ad9eded6..2afcde5ca2 100644
--- a/arch/arm/dts/tegra210-p2571.dts
+++ b/arch/arm/dts/tegra210-p2571.dts
@@ -11,83 +11,83 @@
 	};
 
 	aliases {
-		i2c0 = "/i2c@0,7000d000";
-		i2c1 = "/i2c@0,7000c000";
-		i2c2 = "/i2c@0,7000c400";
-		i2c3 = "/i2c@0,7000c500";
-		i2c4 = "/i2c@0,7000c700";
-		i2c5 = "/i2c@0,7000d100";
-		mmc0 = "/sdhci@0,700b0600";
-		mmc1 = "/sdhci@0,700b0000";
-		spi0 = "/spi@0,7000d400";
-		spi1 = "/spi@0,7000da00";
-		spi2 = "/spi@0,70410000";
-		usb0 = "/usb@0,7d000000";
+		i2c0 = "/i2c@7000d000";
+		i2c1 = "/i2c@7000c000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		i2c5 = "/i2c@7000d100";
+		mmc0 = "/sdhci@700b0600";
+		mmc1 = "/sdhci@700b0000";
+		spi0 = "/spi@7000d400";
+		spi1 = "/spi@7000da00";
+		spi2 = "/spi@70410000";
+		usb0 = "/usb@7d000000";
 	};
 
 	memory {
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};
 
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@0,7000c700 {
+	i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 	};
 
-	i2c@0,7000d100 {
+	i2c@7000d100 {
 		status = "okay";
 		clock-frequency = <400000>;
 	};
 
-	spi@0,7000d400 {
+	spi@7000d400 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 	};
 
-	spi@0,7000da00 {
+	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 	};
 
-	spi@0,70410000 {
+	spi@70410000 {
 		status = "okay";
 		spi-max-frequency = <24000000>;
 	};
 
-	sdhci@0,700b0000 {
+	sdhci@700b0000 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
 		bus-width = <4>;
 	};
 
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 	};
 
-	usb@0,7d000000 {
+	usb@7d000000 {
 		status = "okay";
 		dr_mode = "otg";
 	};