diff options
| author | Jagan Teki <jagan@amarulasolutions.com> | 2018-08-05 00:40:13 +0530 |
|---|---|---|
| committer | Jagan Teki <jagan@amarulasolutions.com> | 2018-08-13 13:10:09 +0530 |
| commit | 25b3d90b2cf4ab6c5407a458f23f1fc669b02ce6 (patch) | |
| tree | 01c78bc4b7ed3ae1d327615579702a772518c266 /arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts | |
| parent | 0ca4d40cfe598b55c377fffdee1970c44e73fbda (diff) | |
| download | u-boot-25b3d90b2cf4ab6c5407a458f23f1fc669b02ce6.tar.gz | |
ARM: dts: sun8i: Update R40/V40 dts(i) files from Linux-v4.18-rc3
Update all R40/V40 devicetree dtsi and dtsi files from Linux-v4.18-rc3
with below commit:
R40:
commit c36fd5a48bd20820855e3e91a89297eeaa31836e
Author: Chen-Yu Tsai <wens@csie.org>
Date: Wed May 2 00:12:25 2018 +0800
ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable GMAC ethernet controller
V40:
commit c5f0bb472795170ab5c33be12e29ce7465fb31ed
Author: Icenowy Zheng <icenowy@aosc.io>
Date: Fri Apr 6 22:03:44 2018 +0800
ARM: sun8i: v40: enable USB host ports for Banana Pi M2 Berry
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # BPI-M2-Ultra, BPI-M2-Berry
Diffstat (limited to 'arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts')
| -rw-r--r-- | arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts | 50 |
1 files changed, 50 insertions, 0 deletions
diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts index 193d9b29ec..35859d8f32 100644 --- a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts @@ -56,6 +56,40 @@ chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + + pwr-led { + label = "bananapi:red:pwr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + user-led { + label = "bananapi:green:user"; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + enable-active-high; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ + }; +}; + +&ehci1 { + /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */ + status = "okay"; }; &i2c0 { @@ -125,8 +159,24 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pg_pins>; + vmmc-supply = <®_dldo2>; + vqmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; + +&usbphy { + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; |