arm: dts: imx8mp: sync dts from Linux Kernel

Sync dts from Linux Kernel
commit f838f8d2b694cf9d524dc("mfd: ab8500-debugfs: Remove extraneous seq_putc")

Signed-off-by: Peng Fan <peng.fan@nxp.com>

1 files changed, 214 insertions, 20 deletions

diff --git a/arch/arm/dts/imx8mp.dtsi b/arch/arm/dts/imx8mp.dtsi
index 0fb29cc812..ecccfbb4f5 100644
--- a/arch/arm/dts/imx8mp.dtsi
+++ b/arch/arm/dts/imx8mp.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include "imx8mp-pinfunc.h"
 
@@ -22,6 +23,12 @@
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
 		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		i2c5 = &i2c6;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
@@ -43,6 +50,7 @@
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			#cooling-cells = <2>;
 		};
 
 		A53_1: cpu@1 {
@@ -53,6 +61,7 @@
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			#cooling-cells = <2>;
 		};
 
 		A53_2: cpu@2 {
@@ -63,6 +72,7 @@
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			#cooling-cells = <2>;
 		};
 
 		A53_3: cpu@3 {
@@ -73,6 +83,7 @@
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			#cooling-cells = <2>;
 		};
 
 		A53_L2: l2-cache0 {
@@ -122,17 +133,86 @@
 		clock-output-names = "clk_ext4";
 	};
 
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 0>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		soc-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 1>;
+			trips {
+				soc_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <8000000>;
 		arm,no-tick-in-suspend;
 	};
@@ -144,7 +224,7 @@
 		ranges = <0x0 0x0 0x0 0x3e000000>;
 
 		aips1: bus@30000000 {
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -215,6 +295,13 @@
 				gpio-ranges = <&iomuxc 0 114 30>;
 			};
 
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mp-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_TSENSOR_ROOT>;
+				#thermal-sensor-cells = <1>;
+			};
+
 			wdog1: watchdog@30280000 {
 				compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
 				reg = <0x30280000 0x10000>;
@@ -233,7 +320,7 @@
 				reg = <0x30340000 0x10000>;
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
+			ocotp: efuse@30350000 {
 				compatible = "fsl,imx8mp-ocotp", "fsl,imx8mm-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>;
@@ -270,6 +357,8 @@
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
 					status = "disabled";
@@ -284,14 +373,36 @@
 					 <&clk_ext3>, <&clk_ext4>;
 				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
 					      "clk_ext3", "clk_ext4";
-				assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>,
+				assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>,
+						  <&clk IMX8MP_CLK_A53_CORE>,
+						  <&clk IMX8MP_CLK_NOC>,
+						  <&clk IMX8MP_CLK_NOC_IO>,
+						  <&clk IMX8MP_CLK_GIC>,
+						  <&clk IMX8MP_CLK_AUDIO_AHB>,
+						  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>,
 						  <&clk IMX8MP_CLK_IPG_AUDIO_ROOT>,
 						  <&clk IMX8MP_AUDIO_PLL1>,
 						  <&clk IMX8MP_AUDIO_PLL2>;
-			};
-
-			src: src@30390000 {
-				compatible = "fsl,imx8mp-src", "fsl,imx8mq-src", "syscon";
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_ARM_PLL_OUT>,
+							 <&clk IMX8MP_SYS_PLL2_1000M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_SYS_PLL2_500M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>;
+				assigned-clock-rates = <0>, <0>,
+						       <1000000000>,
+						       <800000000>,
+						       <500000000>,
+						       <400000000>,
+						       <800000000>,
+						       <400000000>,
+						       <393216000>,
+						       <361267200>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mp-src", "syscon";
 				reg = <0x30390000 0x10000>;
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				#reset-cells = <1>;
@@ -299,7 +410,7 @@
 		};
 
 		aips2: bus@30400000 {
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -348,10 +459,18 @@
 				#pwm-cells = <2>;
 				status = "disabled";
 			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+			};
 		};
 
 		aips3: bus@30800000 {
-			compatible = "simple-bus";
+			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -433,6 +552,66 @@
 				status = "disabled";
 			};
 
+			flexcan1: can@308c0000 {
+				compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x308c0000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+					 <&clk IMX8MP_CLK_CAN1_ROOT>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&gpr 0x10 4>;
+				status = "disabled";
+			};
+
+			flexcan2: can@308d0000 {
+				compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x308d0000 0x10000>;
+				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+					 <&clk IMX8MP_CLK_CAN2_ROOT>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&gpr 0x10 5>;
+				status = "disabled";
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_AHB>,
+					 <&clk IMX8MP_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
 			i2c1: i2c@30a20000 {
 				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
 				#address-cells = <1>;
@@ -454,7 +633,7 @@
 			};
 
 			i2c3: i2c@30a40000 {
-				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x30a40000 0x10000>;
@@ -485,6 +664,14 @@
 				status = "disabled";
 			};
 
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
 			i2c5: i2c@30ad0000 {
 				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
 				#address-cells = <1>;
@@ -506,7 +693,7 @@
 			};
 
 			usdhc1: mmc@30b40000 {
-				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_DUMMY>,
@@ -520,7 +707,7 @@
 			};
 
 			usdhc2: mmc@30b50000 {
-				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_DUMMY>,
@@ -534,7 +721,7 @@
 			};
 
 			usdhc3: mmc@30b60000 {
-				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_DUMMY>,
@@ -552,18 +739,19 @@
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>,
-					 <&clk IMX8MP_CLK_SDMA1_ROOT>;
+					 <&clk IMX8MP_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
 			};
 
 			fec: ethernet@30be0000 {
-				compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				compatible = "fsl,imx8mp-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
 				reg = <0x30be0000 0x10000>;
 				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_ENET1_ROOT>,
 					 <&clk IMX8MP_CLK_SIM_ENET_ROOT>,
 					 <&clk IMX8MP_CLK_ENET_TIMER>,
@@ -594,5 +782,11 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
 		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };