diff options
| author | Heiko Schocher <hs@denx.de> | 2009-01-30 12:55:38 +0100 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2009-02-10 00:54:42 +0100 |
| commit | c92fac91a06c60f874c605e3ca80dd407c1caaa7 (patch) | |
| tree | 1bdd335f87dc229a2fda058b8a9496a51928f3d9 /README | |
| parent | bced7ccefa08512c54a6d146658ff7dbc33d5dfe (diff) | |
| download | u-boot-c92fac91a06c60f874c605e3ca80dd407c1caaa7.tar.gz | |
82xx serial, smc: add configurable SMC Rx buffer len
This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
With this option it is possible to allow the receive
buffer for the SMC on 82xx to be greater then 1. In case
CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
old version.
When defining CONFIG_SYS_SMC_RXBUFLEN also
CONFIG_SYS_MAXIDLE must be defined to setup the maximum
idle timeout for the SMC.
Signed-off-by: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'README')
| -rw-r--r-- | README | 8 |
1 files changed, 8 insertions, 0 deletions
@@ -484,6 +484,14 @@ The following options need to be configured: CONFIG_SYS_BAUDRATE_TABLE, see below. CONFIG_SYS_BRGCLK_PRESCALE, baudrate prescale +- Console Rx buffer length + With CONFIG_SYS_SMC_RXBUFLEN it is possible to define + the maximum receive buffer length for the SMC. + This option is actual only for 82xx possible. + If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE + must be defined, to setup the maximum idle timeout for + the SMC. + - Interrupt driven serial port input: CONFIG_SERIAL_SOFTWARE_FIFO |