diff options
| author | Felix Brack <fb@ltec.ch> | 2022-02-21 14:26:05 +0100 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2022-02-28 10:33:11 -0500 |
| commit | 551f426011e31fad37fe66108ffdf05eb48e3176 (patch) | |
| tree | b1b797995e6cf6d6c30fc8649495d45a08e4d168 | |
| parent | 286f94803ee446a3ef730626f2219a0a28a82b8e (diff) | |
| download | u-boot-551f426011e31fad37fe66108ffdf05eb48e3176.tar.gz | |
arm: pdu001: Setup pinmux for console UART as early as possible
To make sure we get a working console as soon as possible in the SPL the
UART pins require to be configured earlier. This is especially
true for the pins of UART3, since the PDU001 board uses this UART for
the console by default.
Signed-off-by: Felix Brack <fb@ltec.ch>
| -rw-r--r-- | board/eets/pdu001/board.c | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/board/eets/pdu001/board.c b/board/eets/pdu001/board.c index 8612c09d40..2b483dab8e 100644 --- a/board/eets/pdu001/board.c +++ b/board/eets/pdu001/board.c @@ -216,6 +216,36 @@ const struct dpll_params *get_dpll_ddr_params(void) return &dpll_ddr; } +void set_uart_mux_conf(void) +{ + switch (CONFIG_CONS_INDEX) { + case 1: { + enable_uart0_pin_mux(); + break; + } + case 2: { + enable_uart1_pin_mux(); + break; + } + case 3: { + enable_uart2_pin_mux(); + break; + } + case 4: { + enable_uart3_pin_mux(); + break; + } + case 5: { + enable_uart4_pin_mux(); + break; + } + case 6: { + enable_uart5_pin_mux(); + break; + } + } +} + void set_mux_conf_regs(void) { /* done first by the ROM and afterwards by the pin controller driver */ |