diff options
| author | Fabio Estevam <fabio.estevam@nxp.com> | 2016-08-29 20:37:17 -0300 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2016-09-06 18:22:48 +0200 |
| commit | b343417e2959d043ffd831fd15b08e2a49de6340 (patch) | |
| tree | 403131d071d0464b7df090336bb83c075621ff9d | |
| parent | 7dbda25ecd6d7cba13d29161675309ca43e3ba12 (diff) | |
| download | u-boot-b343417e2959d043ffd831fd15b08e2a49de6340.tar.gz | |
mx6ul_14x14_evk: Adjust SPL DDR3 settings
Adjust DDR3 initialization done in SPL by comparing them against
the NXP DCD table.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
| -rw-r--r-- | board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index 126e499f92..4a1e60d828 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -777,17 +777,17 @@ static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = { .dram_odt0 = 0x00000030, .dram_odt1 = 0x00000030, .dram_sdba2 = 0x00000000, - .dram_sdclk_0 = 0x00000008, - .dram_sdqs0 = 0x00000038, + .dram_sdclk_0 = 0x00000030, + .dram_sdqs0 = 0x00000030, .dram_sdqs1 = 0x00000030, .dram_reset = 0x00000030, }; static struct mx6_mmdc_calibration mx6_mmcd_calib = { - .p0_mpwldectrl0 = 0x00070007, - .p0_mpdgctrl0 = 0x41490145, - .p0_mprddlctl = 0x40404546, - .p0_mpwrdlctl = 0x4040524D, + .p0_mpwldectrl0 = 0x00000000, + .p0_mpdgctrl0 = 0x41570155, + .p0_mprddlctl = 0x4040474A, + .p0_mpwrdlctl = 0x40405550, }; struct mx6_ddr_sysinfo ddr_sysinfo = { @@ -797,7 +797,7 @@ struct mx6_ddr_sysinfo ddr_sysinfo = { .cs1_mirror = 0, .rtt_wr = 2, .rtt_nom = 1, /* RTT_Nom = RZQ/2 */ - .walat = 1, /* Write additional latency */ + .walat = 0, /* Write additional latency */ .ralat = 5, /* Read additional latency */ .mif3_mode = 3, /* Command prediction working mode */ .bi_on = 1, /* Bank interleaving enabled */ |