Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts: arch/arm/cpu/armv7/config.mk board/ti/am43xx/mux.c include/configs/am43xx_evm.h Signed-off-by: Tom Rini <trini@ti.com>
author: Tom Rini <trini@ti.com> 2014-02-26 16:49:58 -0500
committer: Tom Rini <trini@ti.com> 2014-02-26 16:49:58 -0500
commit: eeb72e67619b98d2502fe634a3a5d9953de92ad0 (patch)
tree: edea4b04062ec956158c163b13c9a31fcfdccde8
parent: 715b56fe2b47e073e6f2425e0cedba0e92a4014d (diff)
parent: 1551df35f296f0a8df32f4f2054254f46e8be252 (diff)
download: u-boot-eeb72e67619b98d2502fe634a3a5d9953de92ad0.tar.gz
121 files changed, 5960 insertions, 608 deletions
diff --git a/README b/README
index f51f17ec69..ff4926040b 100644
--- a/README
+++ b/README
@@ -1741,7 +1741,7 @@ CBFS (Coreboot Filesystem) support
 
 		If this option is set, then U-Boot will prevent the environment
 		variable "splashimage" from being set to a problematic address
-		(see README.displaying-bmps and README.arm-unaligned-accesses).
+		(see README.displaying-bmps).
 		This option is useful for targets where, due to alignment
 		restrictions, an improperly aligned BMP image will cause a data
 		abort. If you think you will not have problems with unaligned
@@ -3742,12 +3742,6 @@ Configuration Settings:
 	its config.mk file). If you find problems enabling this option on
 	your board please report the problem and send patches!
 
-- CONFIG_SYS_SYM_OFFSETS
-	This is set by architectures that use offsets for link symbols
-	instead of absolute values. So bss_start is obtained using an
-	offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than
-	directly. You should not need to touch this setting.
-
 - CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only)
 	This is set by OMAP boards for the max time that reset should
 	be asserted. See doc/README.omap-reset-time for details on how
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index 00d1b30ba6..3e2358e132 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -70,32 +70,6 @@ _end_vect:
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
@@ -295,7 +269,6 @@ cpu_init_crit:
 #ifdef CONFIG_SPL_BUILD
 	.align	5
 do_hang:
-	ldr	sp, _TEXT_BASE			/* use 32 words about stack */
 	bl	hang				/* hang and never return */
 #else	/* !CONFIG_SPL_BUILD */
 	.align	5
diff --git a/arch/arm/cpu/arm1136/u-boot-spl.lds b/arch/arm/cpu/arm1136/u-boot-spl.lds
index bccde73317..0299902f20 100644
--- a/arch/arm/cpu/arm1136/u-boot-spl.lds
+++ b/arch/arm/cpu/arm1136/u-boot-spl.lds
@@ -33,7 +33,11 @@ SECTIONS
 	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
 	. = ALIGN(4);
 	__image_copy_end = .;
-	_end = .;
+
+	.end :
+	{
+		*(.__end)
+	}
 
 	.bss :
 	{
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index ffd7dd0dcd..ce620115d4 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -77,33 +77,6 @@ _end_vect:
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 /* IRQ stack memory (calculated at run-time) + 8 bytes */
 .globl IRQ_STACK_START_IN
 IRQ_STACK_START_IN:
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index f180eb8aa6..1a34842690 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -67,32 +67,6 @@ _pad:			.word 0x12345678 /* now 16*4=64 */
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
index 4bed4fcdd7..96994043e4 100644
--- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
+++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
@@ -50,5 +50,8 @@ SECTIONS
 	.bss : { *(.bss*) }
 	__bss_end = .;
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
 }
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index a67b659fd0..7bf094aec1 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -55,32 +55,6 @@ _fiq:			.word fiq
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
diff --git a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S b/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S
index e83968fb7a..a9ec81a75c 100644
--- a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S
+++ b/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S
@@ -26,27 +26,18 @@
 #define CONFIG_SYS_MATRIX_EBICSA_VAL CONFIG_SYS_MATRIX_EBI0CSA_VAL
 #endif
 
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
 .globl lowlevel_init
 .type lowlevel_init,function
 lowlevel_init:
 
-	mov	r5, pc		/* r5 = POS1 + 4 current */
 POS1:
+	adr	r5, POS1	/* r5 = POS1 run time */
 	ldr	r0, =POS1	/* r0 = POS1 compile */
-	ldr	r2, _TEXT_BASE
-	sub	r0, r0, r2	/* r0 = POS1-_TEXT_BASE (POS1 relative) */
 	sub	r5, r5, r0	/* r0 = CONFIG_SYS_TEXT_BASE-1 */
-	sub	r5, r5, #4	/* r1 = text base - current */
 
 	/* memory control configuration 1 */
 	ldr	r0, =SMRDATA
 	ldr	r2, =SMRDATA1
-	ldr	r1, _TEXT_BASE
-	sub	r0, r0, r1
-	sub	r2, r2, r1
 	add	r0, r0, r5
 	add	r2, r2, r5
 0:
@@ -149,9 +140,6 @@ PLL_setup_end:
 
 	ldr	r0, =SMRDATA1
 	ldr	r2, =SMRDATA2
-	ldr	r1, _TEXT_BASE
-	sub	r0, r0, r1
-	sub	r2, r2, r1
 	add	r0, r0, r5
 	add	r2, r2, r5
 2:
diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S
index 5de2bad584..34a0fcb462 100644
--- a/arch/arm/cpu/arm926ejs/mxs/start.S
+++ b/arch/arm/cpu/arm926ejs/mxs/start.S
@@ -101,32 +101,6 @@ fiq:
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#ifdef CONFIG_SPL_TEXT_BASE
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
@@ -207,6 +181,5 @@ _reset:
 	bx	lr
 
 _hang:
-	ldr	sp, _TEXT_BASE			/* switch to abort stack */
 1:
 	bl	1b				/* hang and never return */
diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
index 80fb9bdc8d..d0b482d615 100644
--- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
@@ -49,9 +49,14 @@ SECTIONS
 		__bss_end = .;
 	}
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
 
-	.dynsym _end : { *(.dynsym) }
+	.dynsym _image_binary_end : { *(.dynsym) }
 	.dynbss : { *(.dynbss) }
 	.dynstr : { *(.dynstr*) }
 	.dynamic : { *(.dynamic*) }
diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
index 76b499d87f..b6d0f65b66 100644
--- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
@@ -49,9 +49,14 @@ SECTIONS
 		__bss_end = .;
 	}
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
 
-	.dynsym _end : { *(.dynsym) }
+	.dynsym _image_binary_end : { *(.dynsym) }
 	.dynbss : { *(.dynbss) }
 	.dynstr : { *(.dynstr*) }
 	.dynamic : { *(.dynamic*) }
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 5360f55bc1..0717327050 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -102,32 +102,6 @@ _fiq:
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
@@ -330,7 +304,6 @@ flush_dcache:
 #ifdef CONFIG_SPL_BUILD
 	.align	5
 do_hang:
-	ldr	sp, _TEXT_BASE			/* switch to abort stack */
 1:
 	bl	1b				/* hang and never return */
 #else	/* !CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index e16b088141..7d50145836 100644
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -71,32 +71,6 @@ _vectors_end:
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index 5783df1ef2..7404ea7348 100644
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -67,32 +67,6 @@ _fiq:
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 0467d00d6a..119ebb3b22 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -23,6 +23,7 @@ obj-y	+= nonsec_virt.o
 obj-y	+= virt-v7.o
 endif
 
+obj-$(CONFIG_KONA) += kona-common/
 obj-$(CONFIG_OMAP_COMMON) += omap-common/
 obj-$(CONFIG_TEGRA) += tegra-common/
 
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index c7dad6681d..2b15a64667 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -36,11 +36,15 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static const struct gpio_bank gpio_bank_am33xx[4] = {
+static const struct gpio_bank gpio_bank_am33xx[] = {
 	{ (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
 	{ (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
 	{ (void *)AM33XX_GPIO2_BASE, METHOD_GPIO_24XX },
 	{ (void *)AM33XX_GPIO3_BASE, METHOD_GPIO_24XX },
+#ifdef CONFIG_AM43XX
+	{ (void *)AM33XX_GPIO4_BASE, METHOD_GPIO_24XX },
+	{ (void *)AM33XX_GPIO5_BASE, METHOD_GPIO_24XX },
+#endif
 };
 
 const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
index fb654bb836..57f5949476 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
@@ -94,6 +94,8 @@ void enable_basic_clocks(void)
 		&cmper->gpio1clkctrl,
 		&cmper->gpio2clkctrl,
 		&cmper->gpio3clkctrl,
+		&cmper->gpio4clkctrl,
+		&cmper->gpio5clkctrl,
 		&cmper->i2c1clkctrl,
 		&cmper->emiffwclkctrl,
 		&cmper->emifclkctrl,
diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
index ef14f47ebc..9b5a47b018 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
@@ -211,11 +211,8 @@ static u32 pll_dco_freq_sel(u32 clkout_dco)
 static u32 pll_sigma_delta_val(u32 clkout_dco)
 {
 	u32 sig_val = 0;
-	float frac_div;
 
-	frac_div = (float) clkout_dco / 250;
-	frac_div = frac_div + 0.90;
-	sig_val = (int)frac_div;
+	sig_val = (clkout_dco + 225) / 250;
 	sig_val = sig_val << 24;
 
 	return sig_val;
diff --git a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
index 9302856a95..b1c28c9442 100644
--- a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
@@ -38,7 +38,11 @@ SECTIONS
 
 	. = ALIGN(4);
 	__image_copy_end = .;
-	_end = .;
+
+	.end :
+	{
+		*(.__end)
+	} >.sram
 
 	.bss :
 	{
diff --git a/arch/arm/cpu/armv7/bcm281xx/Makefile b/arch/arm/cpu/armv7/bcm281xx/Makefile
new file mode 100644
index 0000000000..98f5aa59ca
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/Makefile
@@ -0,0 +1,11 @@
+#
+# Copyright 2013 Broadcom Corporation.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= reset.o
+obj-y	+= clk-core.o
+obj-y	+= clk-bcm281xx.o
+obj-y	+= clk-sdio.o
+obj-y	+= clk-bsc.o
diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c b/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
new file mode 100644
index 0000000000..bc8a170b40
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
@@ -0,0 +1,523 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+/*
+ *
+ * bcm281xx-specific clock tables
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+#define CLOCK_1K		1000
+#define CLOCK_1M		(CLOCK_1K * 1000)
+
+/* declare a reference clock */
+#define DECLARE_REF_CLK(clk_name, clk_parent, clk_rate, clk_div) \
+static struct refclk clk_name = { \
+	.clk    =       { \
+		.name   =       #clk_name, \
+		.parent =       clk_parent, \
+		.rate   =       clk_rate, \
+		.div    =       clk_div, \
+		.ops    =       &ref_clk_ops, \
+	}, \
+}
+
+/*
+ * Reference clocks
+ */
+
+/* Declare a list of reference clocks */
+DECLARE_REF_CLK(ref_crystal,	0,		26  * CLOCK_1M,	1);
+DECLARE_REF_CLK(var_96m,	0,		96  * CLOCK_1M,	1);
+DECLARE_REF_CLK(ref_96m,	0,		96  * CLOCK_1M,	1);
+DECLARE_REF_CLK(ref_312m,	0,		312 * CLOCK_1M,	0);
+DECLARE_REF_CLK(ref_104m,	&ref_312m.clk,	104 * CLOCK_1M,	3);
+DECLARE_REF_CLK(ref_52m,	&ref_104m.clk,	52  * CLOCK_1M,	2);
+DECLARE_REF_CLK(ref_13m,	&ref_52m.clk,	13  * CLOCK_1M,	4);
+DECLARE_REF_CLK(var_312m,	0,		312 * CLOCK_1M,	0);
+DECLARE_REF_CLK(var_104m,	&var_312m.clk,	104 * CLOCK_1M,	3);
+DECLARE_REF_CLK(var_52m,	&var_104m.clk,	52  * CLOCK_1M,	2);
+DECLARE_REF_CLK(var_13m,	&var_52m.clk,	13  * CLOCK_1M,	4);
+
+struct refclk_lkup {
+	struct refclk *procclk;
+	const char *name;
+};
+
+/* Lookup table for string to clk tranlation */
+#define MKSTR(x) {&x, #x}
+static struct refclk_lkup refclk_str_tbl[] = {
+	MKSTR(ref_crystal), MKSTR(var_96m), MKSTR(ref_96m),
+	MKSTR(ref_312m), MKSTR(ref_104m), MKSTR(ref_52m),
+	MKSTR(ref_13m), MKSTR(var_312m), MKSTR(var_104m),
+	MKSTR(var_52m), MKSTR(var_13m),
+};
+
+int refclk_entries = sizeof(refclk_str_tbl)/sizeof(refclk_str_tbl[0]);
+
+/* convert ref clock string to clock structure pointer */
+struct refclk *refclk_str_to_clk(const char *name)
+{
+	int i;
+	struct refclk_lkup *tblp = refclk_str_tbl;
+	for (i = 0; i < refclk_entries; i++, tblp++) {
+		if (!(strcmp(name, tblp->name)))
+			return tblp->procclk;
+	}
+	return NULL;
+}
+
+/* frequency tables indexed by freq_id */
+unsigned long master_axi_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	52 * CLOCK_1M,
+	104 * CLOCK_1M,
+	156 * CLOCK_1M,
+	156 * CLOCK_1M,
+	208 * CLOCK_1M,
+	312 * CLOCK_1M,
+	312 * CLOCK_1M
+};
+
+unsigned long master_ahb_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	52 * CLOCK_1M,
+	52 * CLOCK_1M,
+	52 * CLOCK_1M,
+	78 * CLOCK_1M,
+	104 * CLOCK_1M,
+	104 * CLOCK_1M,
+	156 * CLOCK_1M
+};
+
+unsigned long slave_axi_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	52 * CLOCK_1M,
+	78 * CLOCK_1M,
+	104 * CLOCK_1M,
+	156 * CLOCK_1M,
+	156 * CLOCK_1M
+};
+
+unsigned long slave_apb_freq_tbl[8] = {
+	26 * CLOCK_1M,
+	26 * CLOCK_1M,
+	39 * CLOCK_1M,
+	52 * CLOCK_1M,
+	52 * CLOCK_1M,
+	78 * CLOCK_1M
+};
+
+static struct bus_clk_data bsc1_apb_data = {
+	.gate = HW_SW_GATE_AUTO(0x0458, 16, 0, 1),
+};
+
+static struct bus_clk_data bsc2_apb_data = {
+	.gate = HW_SW_GATE_AUTO(0x045c, 16, 0, 1),
+};
+
+static struct bus_clk_data bsc3_apb_data = {
+	.gate = HW_SW_GATE_AUTO(0x0484, 16, 0, 1),
+};
+
+/* * Master CCU clocks */
+static struct peri_clk_data sdio1_data = {
+	.gate		= HW_SW_GATE(0x0358, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a28, 0, 3),
+	.div		= DIVIDER(0x0a28, 4, 14),
+	.trig		= TRIGGER(0x0afc, 9),
+};
+
+static struct peri_clk_data sdio2_data = {
+	.gate		= HW_SW_GATE(0x035c, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a2c, 0, 3),
+	.div		= DIVIDER(0x0a2c, 4, 14),
+	.trig		= TRIGGER(0x0afc, 10),
+};
+
+static struct peri_clk_data sdio3_data = {
+	.gate		= HW_SW_GATE(0x0364, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a34, 0, 3),
+	.div		= DIVIDER(0x0a34, 4, 14),
+	.trig		= TRIGGER(0x0afc, 12),
+};
+
+static struct peri_clk_data sdio4_data = {
+	.gate		= HW_SW_GATE(0x0360, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a30, 0, 3),
+	.div		= DIVIDER(0x0a30, 4, 14),
+	.trig		= TRIGGER(0x0afc, 11),
+};
+
+static struct peri_clk_data sdio1_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x0358, 20, 4),
+};
+
+static struct peri_clk_data sdio2_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x035c, 20, 4),
+};
+
+static struct peri_clk_data sdio3_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x0364, 20, 4),
+};
+
+static struct peri_clk_data sdio4_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),
+	.gate		= SW_ONLY_GATE(0x0360, 20, 4),
+};
+
+static struct bus_clk_data sdio1_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0358, 16, 0, 1),
+};
+
+static struct bus_clk_data sdio2_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x035c, 16, 0, 1),
+};
+
+static struct bus_clk_data sdio3_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0364, 16, 0, 1),
+};
+
+static struct bus_clk_data sdio4_ahb_data = {
+	.gate		= HW_SW_GATE_AUTO(0x0360, 16, 0, 1),
+};
+
+/* * Slave CCU clocks */
+static struct peri_clk_data bsc1_data = {
+	.gate		= HW_SW_GATE(0x0458, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a64, 0, 3),
+	.trig		= TRIGGER(0x0afc, 23),
+};
+
+static struct peri_clk_data bsc2_data = {
+	.gate		= HW_SW_GATE(0x045c, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a68, 0, 3),
+	.trig		= TRIGGER(0x0afc, 24),
+};
+
+static struct peri_clk_data bsc3_data = {
+	.gate		= HW_SW_GATE(0x0484, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a84, 0, 3),
+	.trig		= TRIGGER(0x0b00, 2),
+};
+
+/*
+ * CCU clocks
+ */
+
+static struct ccu_clock kpm_ccu_clk = {
+	.clk = {
+		.name = "kpm_ccu_clk",
+		.ops = &ccu_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.num_policy_masks = 1,
+	.policy_freq_offset = 0x00000008,
+	.freq_bit_shift = 8,
+	.policy_ctl_offset = 0x0000000c,
+	.policy0_mask_offset = 0x00000010,
+	.policy1_mask_offset = 0x00000014,
+	.policy2_mask_offset = 0x00000018,
+	.policy3_mask_offset = 0x0000001c,
+	.lvm_en_offset = 0x00000034,
+	.freq_id = 2,
+	.freq_tbl = master_axi_freq_tbl,
+};
+
+static struct ccu_clock kps_ccu_clk = {
+	.clk = {
+		.name = "kps_ccu_clk",
+		.ops = &ccu_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.num_policy_masks = 2,
+	.policy_freq_offset = 0x00000008,
+	.freq_bit_shift = 8,
+	.policy_ctl_offset = 0x0000000c,
+	.policy0_mask_offset = 0x00000010,
+	.policy1_mask_offset = 0x00000014,
+	.policy2_mask_offset = 0x00000018,
+	.policy3_mask_offset = 0x0000001c,
+	.policy0_mask2_offset = 0x00000048,
+	.policy1_mask2_offset = 0x0000004c,
+	.policy2_mask2_offset = 0x00000050,
+	.policy3_mask2_offset = 0x00000054,
+	.lvm_en_offset = 0x00000034,
+	.freq_id = 2,
+	.freq_tbl = slave_axi_freq_tbl,
+};
+
+/*
+ * Bus clocks
+ */
+
+/* KPM bus clocks */
+static struct bus_clock sdio1_ahb_clk = {
+	.clk = {
+		.name = "sdio1_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio1_ahb_data,
+};
+
+static struct bus_clock sdio2_ahb_clk = {
+	.clk = {
+		.name = "sdio2_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio2_ahb_data,
+};
+
+static struct bus_clock sdio3_ahb_clk = {
+	.clk = {
+		.name = "sdio3_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio3_ahb_data,
+};
+
+static struct bus_clock sdio4_ahb_clk = {
+	.clk = {
+		.name = "sdio4_ahb_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.freq_tbl = master_ahb_freq_tbl,
+	.data = &sdio4_ahb_data,
+};
+
+static struct bus_clock bsc1_apb_clk = {
+	.clk = {
+		.name = "bsc1_apb_clk",
+		.parent = &kps_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.freq_tbl = slave_apb_freq_tbl,
+	.data = &bsc1_apb_data,
+};
+
+static struct bus_clock bsc2_apb_clk = {
+	.clk = {
+		.name = "bsc2_apb_clk",
+		.parent = &kps_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+		},
+	.freq_tbl = slave_apb_freq_tbl,
+	.data = &bsc2_apb_data,
+};
+
+static struct bus_clock bsc3_apb_clk = {
+	.clk = {
+		.name = "bsc3_apb_clk",
+		.parent = &kps_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+		},
+	.freq_tbl = slave_apb_freq_tbl,
+	.data = &bsc3_apb_data,
+};
+
+/* KPM peripheral */
+static struct peri_clock sdio1_clk = {
+	.clk = {
+		.name = "sdio1_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio1_data,
+};
+
+static struct peri_clock sdio2_clk = {
+	.clk = {
+		.name = "sdio2_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio2_data,
+};
+
+static struct peri_clock sdio3_clk = {
+	.clk = {
+		.name = "sdio3_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio3_data,
+};
+
+static struct peri_clock sdio4_clk = {
+	.clk = {
+		.name = "sdio4_clk",
+		.parent = &ref_52m.clk,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio4_data,
+};
+
+static struct peri_clock sdio1_sleep_clk = {
+	.clk = {
+		.name = "sdio1_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio1_sleep_data,
+};
+
+static struct peri_clock sdio2_sleep_clk = {
+	.clk = {
+		.name = "sdio2_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio2_sleep_data,
+};
+
+static struct peri_clock sdio3_sleep_clk = {
+	.clk = {
+		.name = "sdio3_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio3_sleep_data,
+};
+
+static struct peri_clock sdio4_sleep_clk = {
+	.clk = {
+		.name = "sdio4_sleep_clk",
+		.parent = &kpm_ccu_clk.clk,
+		.ops = &bus_clk_ops,
+		.ccu_clk_mgr_base = KONA_MST_CLK_BASE_ADDR,
+	},
+	.data = &sdio4_sleep_data,
+};
+
+/* KPS peripheral clock */
+static struct peri_clock bsc1_clk = {
+	.clk = {
+		.name = "bsc1_clk",
+		.parent = &ref_13m.clk,
+		.rate = 13 * CLOCK_1M,
+		.div = 1,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.data = &bsc1_data,
+};
+
+static struct peri_clock bsc2_clk = {
+	.clk = {
+		.name = "bsc2_clk",
+		.parent = &ref_13m.clk,
+		.rate = 13 * CLOCK_1M,
+		.div = 1,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.data = &bsc2_data,
+};
+
+static struct peri_clock bsc3_clk = {
+	.clk = {
+		.name = "bsc3_clk",
+		.parent = &ref_13m.clk,
+		.rate = 13 * CLOCK_1M,
+		.div = 1,
+		.ops = &peri_clk_ops,
+		.ccu_clk_mgr_base = KONA_SLV_CLK_BASE_ADDR,
+	},
+	.data = &bsc3_data,
+};
+
+/* public table for registering clocks */
+struct clk_lookup arch_clk_tbl[] = {
+	/* Peripheral clocks */
+	CLK_LK(sdio1),
+	CLK_LK(sdio2),
+	CLK_LK(sdio3),
+	CLK_LK(sdio4),
+	CLK_LK(sdio1_sleep),
+	CLK_LK(sdio2_sleep),
+	CLK_LK(sdio3_sleep),
+	CLK_LK(sdio4_sleep),
+	CLK_LK(bsc1),
+	CLK_LK(bsc2),
+	CLK_LK(bsc3),
+	/* Bus clocks */
+	CLK_LK(sdio1_ahb),
+	CLK_LK(sdio2_ahb),
+	CLK_LK(sdio3_ahb),
+	CLK_LK(sdio4_ahb),
+	CLK_LK(bsc1_apb),
+	CLK_LK(bsc2_apb),
+	CLK_LK(bsc3_apb),
+};
+
+/* public array size */
+unsigned int arch_clk_tbl_array_size = ARRAY_SIZE(arch_clk_tbl);
diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-bsc.c b/arch/arm/cpu/armv7/bcm281xx/clk-bsc.c
new file mode 100644
index 0000000000..ba55d0aeb1
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/clk-bsc.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+/* Enable appropriate clocks for a BSC/I2C port */
+int clk_bsc_enable(void *base)
+{
+	int ret;
+	char *bscstr, *apbstr;
+
+	switch ((u32) base) {
+	case PMU_BSC_BASE_ADDR:
+		/* PMU clock is always enabled */
+		return 0;
+	case BSC1_BASE_ADDR:
+		bscstr = "bsc1_clk";
+		apbstr = "bsc1_apb_clk";
+		break;
+	case BSC2_BASE_ADDR:
+		bscstr = "bsc2_clk";
+		apbstr = "bsc2_apb_clk";
+		break;
+	case BSC3_BASE_ADDR:
+		bscstr = "bsc3_clk";
+		apbstr = "bsc3_apb_clk";
+		break;
+	default:
+		printf("%s: base 0x%p not found\n", __func__, base);
+		return -EINVAL;
+	}
+
+	/* Note that the bus clock must be enabled first */
+
+	ret = clk_get_and_enable(apbstr);
+	if (ret)
+		return ret;
+
+	ret = clk_get_and_enable(bscstr);
+	if (ret)
+		return ret;
+
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-core.c b/arch/arm/cpu/armv7/bcm281xx/clk-core.c
new file mode 100644
index 0000000000..d4425835a1
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/clk-core.c
@@ -0,0 +1,513 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+/*
+ *
+ * bcm281xx architecture clock framework
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <bitfield.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+#define CLK_WR_ACCESS_PASSWORD	0x00a5a501
+#define WR_ACCESS_OFFSET	0	/* common to all clock blocks */
+#define POLICY_CTL_GO		1	/* Load and refresh policy masks */
+#define POLICY_CTL_GO_ATL	4	/* Active Load */
+
+/* Helper function */
+int clk_get_and_enable(char *clkstr)
+{
+	int ret = 0;
+	struct clk *c;
+
+	debug("%s: %s\n", __func__, clkstr);
+
+	c = clk_get(clkstr);
+	if (c) {
+		ret = clk_enable(c);
+		if (ret)
+			return ret;
+	} else {
+		printf("%s: Couldn't find %s\n", __func__, clkstr);
+		return -EINVAL;
+	}
+	return ret;
+}
+
+/*
+ * Poll a register in a CCU's address space, returning when the
+ * specified bit in that register's value is set (or clear).  Delay
+ * a microsecond after each read of the register.  Returns true if
+ * successful, or false if we gave up trying.
+ *
+ * Caller must ensure the CCU lock is held.
+ */
+#define CLK_GATE_DELAY_USEC 2000
+static inline int wait_bit(void *base, u32 offset, u32 bit, bool want)
+{
+	unsigned int tries;
+	u32 bit_mask = 1 << bit;
+
+	for (tries = 0; tries < CLK_GATE_DELAY_USEC; tries++) {
+		u32 val;
+		bool bit_val;
+
+		val = readl(base + offset);
+		bit_val = (val & bit_mask) ? 1 : 0;
+		if (bit_val == want)
+			return 0;	/* success */
+		udelay(1);
+	}
+
+	debug("%s: timeout on addr 0x%p, waiting for bit %d to go to %d\n",
+	      __func__, base + offset, bit, want);
+
+	return -ETIMEDOUT;
+}
+
+/* Enable a peripheral clock */
+static int peri_clk_enable(struct clk *c, int enable)
+{
+	int ret = 0;
+	u32 reg;
+	struct peri_clock *peri_clk = to_peri_clk(c);
+	struct peri_clk_data *cd = peri_clk->data;
+	struct bcm_clk_gate *gate = &cd->gate;
+	void *base = (void *)c->ccu_clk_mgr_base;
+
+
+	debug("%s: %s\n", __func__, c->name);
+
+	clk_get_rate(c);	/* Make sure rate and sel are filled in */
+
+	/* enable access */
+	writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET);
+
+	if (enable) {
+		debug("%s %s set rate %lu div %lu sel %d parent %lu\n",
+		      __func__, c->name, c->rate, c->div, c->sel,
+		      c->parent->rate);
+
+		/*
+		 * clkgate - only software controllable gates are
+		 * supported by u-boot which includes all clocks
+		 * that matter. This avoids bringing in a lot of extra
+		 * complexity as done in the kernel framework.
+		 */
+		if (gate_exists(gate)) {
+			reg = readl(base + cd->gate.offset);
+			reg |= (1 << cd->gate.en_bit);
+			writel(reg, base + cd->gate.offset);
+		}
+
+		/* div and pll select */
+		if (divider_exists(&cd->div)) {
+			reg = readl(base + cd->div.offset);
+			bitfield_replace(reg, cd->div.shift, cd->div.width,
+					 c->div - 1);
+			writel(reg, base + cd->div.offset);
+		}
+
+		/* frequency selector */
+		if (selector_exists(&cd->sel)) {
+			reg = readl(base + cd->sel.offset);
+			bitfield_replace(reg, cd->sel.shift, cd->sel.width,
+					 c->sel);
+			writel(reg, base + cd->sel.offset);
+		}
+
+		/* trigger */
+		if (trigger_exists(&cd->trig)) {
+			writel((1 << cd->trig.bit), base + cd->trig.offset);
+
+			/* wait for trigger status bit to go to 0 */
+			ret = wait_bit(base, cd->trig.offset, cd->trig.bit, 0);
+			if (ret)
+				return ret;
+		}
+
+		/* wait for running (status_bit = 1) */
+		ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit, 1);
+		if (ret)
+			return ret;
+	} else {
+		debug("%s disable clock %s\n", __func__, c->name);
+
+		/* clkgate */
+		reg = readl(base + cd->gate.offset);
+		reg &= ~(1 << cd->gate.en_bit);
+		writel(reg, base + cd->gate.offset);
+
+		/* wait for stop (status_bit = 0) */
+		ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit, 0);
+	}
+
+	/* disable access */
+	writel(0, base + WR_ACCESS_OFFSET);
+
+	return ret;
+}
+
+/* Set the rate of a peripheral clock */
+static int peri_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	int ret = 0;
+	int i;
+	unsigned long diff;
+	unsigned long new_rate = 0, div = 1;
+	struct peri_clock *peri_clk = to_peri_clk(c);
+	struct peri_clk_data *cd = peri_clk->data;
+	const char **clock;
+
+	debug("%s: %s\n", __func__, c->name);
+	diff = rate;
+
+	i = 0;
+	for (clock = cd->clocks; *clock; clock++, i++) {
+		struct refclk *ref = refclk_str_to_clk(*clock);
+		if (!ref) {
+			printf("%s: Lookup of %s failed\n", __func__, *clock);
+			return -EINVAL;
+		}
+
+		/* round to the new rate */
+		div = ref->clk.rate / rate;
+		if (div == 0)
+			div = 1;
+
+		new_rate = ref->clk.rate / div;
+
+		/* get the min diff */
+		if (abs(new_rate - rate) < diff) {
+			diff = abs(new_rate - rate);
+			c->sel = i;
+			c->parent = &ref->clk;
+			c->rate = new_rate;
+			c->div = div;
+		}
+	}
+
+	debug("%s %s set rate %lu div %lu sel %d parent %lu\n", __func__,
+	      c->name, c->rate, c->div, c->sel, c->parent->rate);
+	return ret;
+}
+
+/* Get the rate of a peripheral clock */
+static unsigned long peri_clk_get_rate(struct clk *c)
+{
+	struct peri_clock *peri_clk = to_peri_clk(c);
+	struct peri_clk_data *cd = peri_clk->data;
+	void *base = (void *)c->ccu_clk_mgr_base;
+	int div = 1;
+	const char **clock;
+	struct refclk *ref;
+	u32 reg;
+
+	debug("%s: %s\n", __func__, c->name);
+	if (selector_exists(&cd->sel)) {
+		reg = readl(base + cd->sel.offset);
+		c->sel = bitfield_extract(reg, cd->sel.shift, cd->sel.width);
+	} else {
+		/*
+		 * For peri clocks that don't have a selector, the single
+		 * reference clock will always exist at index 0.
+		 */
+		c->sel = 0;
+	}
+
+	if (divider_exists(&cd->div)) {
+		reg = readl(base + cd->div.offset);
+		div = bitfield_extract(reg, cd->div.shift, cd->div.width);
+		div += 1;
+	}
+
+	clock = cd->clocks;
+	ref = refclk_str_to_clk(clock[c->sel]);
+	if (!ref) {
+		printf("%s: Can't lookup %s\n", __func__, clock[c->sel]);
+		return 0;
+	}
+
+	c->parent = &ref->clk;
+	c->div = div;
+	c->rate = c->parent->rate / c->div;
+	debug("%s parent rate %lu div %d sel %d rate %lu\n", __func__,
+	      c->parent->rate, div, c->sel, c->rate);
+
+	return c->rate;
+}
+
+/* Peripheral clock operations */
+struct clk_ops peri_clk_ops = {
+	.enable = peri_clk_enable,
+	.set_rate = peri_clk_set_rate,
+	.get_rate = peri_clk_get_rate,
+};
+
+/* Enable a CCU clock */
+static int ccu_clk_enable(struct clk *c, int enable)
+{
+	struct ccu_clock *ccu_clk = to_ccu_clk(c);
+	void *base = (void *)c->ccu_clk_mgr_base;
+	int ret = 0;
+	u32 reg;
+
+	debug("%s: %s\n", __func__, c->name);
+	if (!enable)
+		return -EINVAL;	/* CCU clock cannot shutdown */
+
+	/* enable access */
+	writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET);
+
+	/* config enable for policy engine */
+	writel(1, base + ccu_clk->lvm_en_offset);
+
+	/* wait for bit to go to 0 */
+	ret = wait_bit(base, ccu_clk->lvm_en_offset, 0, 0);
+	if (ret)
+		return ret;
+
+	/* freq ID */
+	if (!ccu_clk->freq_bit_shift)
+		ccu_clk->freq_bit_shift = 8;
+
+	/* Set frequency id for each of the 4 policies */
+	reg = ccu_clk->freq_id |
+	    (ccu_clk->freq_id << (ccu_clk->freq_bit_shift)) |
+	    (ccu_clk->freq_id << (ccu_clk->freq_bit_shift * 2)) |
+	    (ccu_clk->freq_id << (ccu_clk->freq_bit_shift * 3));
+	writel(reg, base + ccu_clk->policy_freq_offset);
+
+	/* enable all clock mask */
+	writel(0x7fffffff, base + ccu_clk->policy0_mask_offset);
+	writel(0x7fffffff, base + ccu_clk->policy1_mask_offset);
+	writel(0x7fffffff, base + ccu_clk->policy2_mask_offset);
+	writel(0x7fffffff, base + ccu_clk->policy3_mask_offset);
+
+	if (ccu_clk->num_policy_masks == 2) {
+		writel(0x7fffffff, base + ccu_clk->policy0_mask2_offset);
+		writel(0x7fffffff, base + ccu_clk->policy1_mask2_offset);
+		writel(0x7fffffff, base + ccu_clk->policy2_mask2_offset);
+		writel(0x7fffffff, base + ccu_clk->policy3_mask2_offset);
+	}
+
+	/* start policy engine */
+	reg = readl(base + ccu_clk->policy_ctl_offset);
+	reg |= (POLICY_CTL_GO + POLICY_CTL_GO_ATL);
+	writel(reg, base + ccu_clk->policy_ctl_offset);
+
+	/* wait till started */
+	ret = wait_bit(base, ccu_clk->policy_ctl_offset, 0, 0);
+	if (ret)
+		return ret;
+
+	/* disable access */
+	writel(0, base + WR_ACCESS_OFFSET);
+
+	return ret;
+}
+
+/* Get the CCU clock rate */
+static unsigned long ccu_clk_get_rate(struct clk *c)
+{
+	struct ccu_clock *ccu_clk = to_ccu_clk(c);
+	debug("%s: %s\n", __func__, c->name);
+	c->rate = ccu_clk->freq_tbl[ccu_clk->freq_id];
+	return c->rate;
+}
+
+/* CCU clock operations */
+struct clk_ops ccu_clk_ops = {
+	.enable = ccu_clk_enable,
+	.get_rate = ccu_clk_get_rate,
+};
+
+/* Enable a bus clock */
+static int bus_clk_enable(struct clk *c, int enable)
+{
+	struct bus_clock *bus_clk = to_bus_clk(c);
+	struct bus_clk_data *cd = bus_clk->data;
+	void *base = (void *)c->ccu_clk_mgr_base;
+	int ret = 0;
+	u32 reg;
+
+	debug("%s: %s\n", __func__, c->name);
+	/* enable access */
+	writel(CLK_WR_ACCESS_PASSWORD, base + WR_ACCESS_OFFSET);
+
+	/* enable gating */
+	reg = readl(base + cd->gate.offset);
+	if (!!(reg & (1 << cd->gate.status_bit)) == !!enable)
+		debug("%s already %s\n", c->name,
+		      enable ? "enabled" : "disabled");
+	else {
+		int want = (enable) ? 1 : 0;
+		reg |= (1 << cd->gate.hw_sw_sel_bit);
+
+		if (enable)
+			reg |= (1 << cd->gate.en_bit);
+		else
+			reg &= ~(1 << cd->gate.en_bit);
+
+		writel(reg, base + cd->gate.offset);
+		ret = wait_bit(base, cd->gate.offset, cd->gate.status_bit,
+			       want);
+		if (ret)
+			return ret;
+	}
+
+	/* disable access */
+	writel(0, base + WR_ACCESS_OFFSET);
+
+	return ret;
+}
+
+/* Get the rate of a bus clock */
+static unsigned long bus_clk_get_rate(struct clk *c)
+{
+	struct bus_clock *bus_clk = to_bus_clk(c);
+	struct ccu_clock *ccu_clk;
+
+	debug("%s: %s\n", __func__, c->name);
+	ccu_clk = to_ccu_clk(c->parent);
+
+	c->rate = bus_clk->freq_tbl[ccu_clk->freq_id];
+	c->div = ccu_clk->freq_tbl[ccu_clk->freq_id] / c->rate;
+	return c->rate;
+}
+
+/* Bus clock operations */
+struct clk_ops bus_clk_ops = {
+	.enable = bus_clk_enable,
+	.get_rate = bus_clk_get_rate,
+};
+
+/* Enable a reference clock */
+static int ref_clk_enable(struct clk *c, int enable)
+{
+	debug("%s: %s\n", __func__, c->name);
+	return 0;
+}
+
+/* Reference clock operations */
+struct clk_ops ref_clk_ops = {
+	.enable = ref_clk_enable,
+};
+
+/*
+ * clk.h implementation follows
+ */
+
+/* Initialize the clock framework */
+int clk_init(void)
+{
+	debug("%s:\n", __func__);
+	return 0;
+}
+
+/* Get a clock handle, give a name string */
+struct clk *clk_get(const char *con_id)
+{
+	int i;
+	struct clk_lookup *clk_tblp;
+
+	debug("%s: %s\n", __func__, con_id);
+
+	clk_tblp = arch_clk_tbl;
+	for (i = 0; i < arch_clk_tbl_array_size; i++, clk_tblp++) {
+		if (clk_tblp->con_id) {
+			if (!con_id || strcmp(clk_tblp->con_id, con_id))
+				continue;
+			return clk_tblp->clk;
+		}
+	}
+	return NULL;
+}
+
+/* Enable a clock */
+int clk_enable(struct clk *c)
+{
+	int ret = 0;
+
+	debug("%s: %s\n", __func__, c->name);
+	if (!c->ops || !c->ops->enable)
+		return -1;
+
+	/* enable parent clock first */
+	if (c->parent)
+		ret = clk_enable(c->parent);
+
+	if (ret)
+		return ret;
+
+	if (!c->use_cnt) {
+		c->use_cnt++;
+		ret = c->ops->enable(c, 1);
+	}
+
+	return ret;
+}
+
+/* Disable a clock */
+void clk_disable(struct clk *c)
+{
+	debug("%s: %s\n", __func__, c->name);
+	if (!c->ops || !c->ops->enable)
+		return;
+
+	if (c->use_cnt) {
+		c->use_cnt--;
+		c->ops->enable(c, 0);
+	}
+
+	/* disable parent */
+	if (c->parent)
+		clk_disable(c->parent);
+}
+
+/* Get the clock rate */
+unsigned long clk_get_rate(struct clk *c)
+{
+	unsigned long rate;
+
+	debug("%s: %s\n", __func__, c->name);
+	if (!c || !c->ops || !c->ops->get_rate)
+		return 0;
+
+	rate = c->ops->get_rate(c);
+	debug("%s: rate = %ld\n", __func__, rate);
+	return rate;
+}
+
+/* Set the clock rate */
+int clk_set_rate(struct clk *c, unsigned long rate)
+{
+	int ret;
+
+	debug("%s: %s rate=%ld\n", __func__, c->name, rate);
+	if (!c || !c->ops || !c->ops->set_rate)
+		return -EINVAL;
+
+	if (c->use_cnt)
+		return -EINVAL;
+
+	ret = c->ops->set_rate(c, rate);
+
+	return ret;
+}
+
+/* Not required for this arch */
+/*
+long clk_round_rate(struct clk *clk, unsigned long rate);
+int clk_set_parent(struct clk *clk, struct clk *parent);
+struct clk *clk_get_parent(struct clk *clk);
+*/
diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-core.h b/arch/arm/cpu/armv7/bcm281xx/clk-core.h
new file mode 100644
index 0000000000..882a297797
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/clk-core.h
@@ -0,0 +1,495 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <linux/stddef.h>
+
+#ifdef CONFIG_CLK_DEBUG
+#undef writel
+#undef readl
+static inline void writel(u32 val, void *addr)
+{
+	printf("Write [0x%p] = 0x%08x\n", addr, val);
+	*(u32 *)addr = val;
+}
+
+static inline u32 readl(void *addr)
+{
+	u32 val = *(u32 *)addr;
+	printf("Read  [0x%p] = 0x%08x\n", addr, val);
+	return val;
+}
+#endif
+
+struct clk;
+
+struct clk_lookup {
+	const char *dev_id;
+	const char *con_id;
+	struct clk *clk;
+};
+
+extern struct clk_lookup arch_clk_tbl[];
+extern unsigned int arch_clk_tbl_array_size;
+
+/**
+ * struct clk_ops - standard clock operations
+ * @enable: enable/disable clock, see clk_enable() and clk_disable()
+ * @set_rate: set the clock rate, see clk_set_rate().
+ * @get_rate: get the clock rate, see clk_get_rate().
+ * @round_rate: round a given clock rate, see clk_round_rate().
+ * @set_parent: set the clock's parent, see clk_set_parent().
+ *
+ * Group the common clock implementations together so that we
+ * don't have to keep setting the same fiels again. We leave
+ * enable in struct clk.
+ *
+ */
+struct clk_ops {
+	int (*enable) (struct clk *c, int enable);
+	int (*set_rate) (struct clk *c, unsigned long rate);
+	unsigned long (*get_rate) (struct clk *c);
+	unsigned long (*round_rate) (struct clk *c, unsigned long rate);
+	int (*set_parent) (struct clk *c, struct clk *parent);
+};
+
+struct clk {
+	struct clk *parent;
+	const char *name;
+	int use_cnt;
+	unsigned long rate;	/* in HZ */
+
+	/* programmable divider. 0 means fixed ratio to parent clock */
+	unsigned long div;
+
+	struct clk_src *src;
+	struct clk_ops *ops;
+
+	unsigned long ccu_clk_mgr_base;
+	int sel;
+};
+
+struct refclk *refclk_str_to_clk(const char *name);
+
+#define U8_MAX	((u8)~0U)
+#define U32_MAX	((u32)~0U)
+#define U64_MAX	((u64)~0U)
+
+/* The common clock framework uses u8 to represent a parent index */
+#define PARENT_COUNT_MAX	((u32)U8_MAX)
+
+#define BAD_CLK_INDEX		U8_MAX	/* Can't ever be valid */
+#define BAD_CLK_NAME		((const char *)-1)
+
+#define BAD_SCALED_DIV_VALUE	U64_MAX
+
+/*
+ * Utility macros for object flag management.  If possible, flags
+ * should be defined such that 0 is the desired default value.
+ */
+#define FLAG(type, flag)		BCM_CLK_ ## type ## _FLAGS_ ## flag
+#define FLAG_SET(obj, type, flag)	((obj)->flags |= FLAG(type, flag))
+#define FLAG_CLEAR(obj, type, flag)	((obj)->flags &= ~(FLAG(type, flag)))
+#define FLAG_FLIP(obj, type, flag)	((obj)->flags ^= FLAG(type, flag))
+#define FLAG_TEST(obj, type, flag)	(!!((obj)->flags & FLAG(type, flag)))
+
+/* Clock field state tests */
+
+#define gate_exists(gate)		FLAG_TEST(gate, GATE, EXISTS)
+#define gate_is_enabled(gate)		FLAG_TEST(gate, GATE, ENABLED)
+#define gate_is_hw_controllable(gate)	FLAG_TEST(gate, GATE, HW)
+#define gate_is_sw_controllable(gate)	FLAG_TEST(gate, GATE, SW)
+#define gate_is_sw_managed(gate)	FLAG_TEST(gate, GATE, SW_MANAGED)
+#define gate_is_no_disable(gate)	FLAG_TEST(gate, GATE, NO_DISABLE)
+
+#define gate_flip_enabled(gate)		FLAG_FLIP(gate, GATE, ENABLED)
+
+#define divider_exists(div)		FLAG_TEST(div, DIV, EXISTS)
+#define divider_is_fixed(div)		FLAG_TEST(div, DIV, FIXED)
+#define divider_has_fraction(div)	(!divider_is_fixed(div) && \
+						(div)->frac_width > 0)
+
+#define selector_exists(sel)		((sel)->width != 0)
+#define trigger_exists(trig)		FLAG_TEST(trig, TRIG, EXISTS)
+
+/* Clock type, used to tell common block what it's part of */
+enum bcm_clk_type {
+	bcm_clk_none,		/* undefined clock type */
+	bcm_clk_bus,
+	bcm_clk_core,
+	bcm_clk_peri
+};
+
+/*
+ * Gating control and status is managed by a 32-bit gate register.
+ *
+ * There are several types of gating available:
+ * - (no gate)
+ *     A clock with no gate is assumed to be always enabled.
+ * - hardware-only gating (auto-gating)
+ *     Enabling or disabling clocks with this type of gate is
+ *     managed automatically by the hardware.  Such clocks can be
+ *     considered by the software to be enabled.  The current status
+ *     of auto-gated clocks can be read from the gate status bit.
+ * - software-only gating
+ *     Auto-gating is not available for this type of clock.
+ *     Instead, software manages whether it's enabled by setting or
+ *     clearing the enable bit.  The current gate status of a gate
+ *     under software control can be read from the gate status bit.
+ *     To ensure a change to the gating status is complete, the
+ *     status bit can be polled to verify that the gate has entered
+ *     the desired state.
+ * - selectable hardware or software gating
+ *     Gating for this type of clock can be configured to be either
+ *     under software or hardware control.  Which type is in use is
+ *     determined by the hw_sw_sel bit of the gate register.
+ */
+struct bcm_clk_gate {
+	u32 offset;		/* gate register offset */
+	u32 status_bit;		/* 0: gate is disabled; 0: gatge is enabled */
+	u32 en_bit;		/* 0: disable; 1: enable */
+	u32 hw_sw_sel_bit;	/* 0: hardware gating; 1: software gating */
+	u32 flags;		/* BCM_CLK_GATE_FLAGS_* below */
+};
+
+/*
+ * Gate flags:
+ *   HW         means this gate can be auto-gated
+ *   SW         means the state of this gate can be software controlled
+ *   NO_DISABLE means this gate is (only) enabled if under software control
+ *   SW_MANAGED means the status of this gate is under software control
+ *   ENABLED    means this software-managed gate is *supposed* to be enabled
+ */
+#define BCM_CLK_GATE_FLAGS_EXISTS	((u32)1 << 0)	/* Gate is valid */
+#define BCM_CLK_GATE_FLAGS_HW		((u32)1 << 1)	/* Can auto-gate */
+#define BCM_CLK_GATE_FLAGS_SW		((u32)1 << 2)	/* Software control */
+#define BCM_CLK_GATE_FLAGS_NO_DISABLE	((u32)1 << 3)	/* HW or enabled */
+#define BCM_CLK_GATE_FLAGS_SW_MANAGED	((u32)1 << 4)	/* SW now in control */
+#define BCM_CLK_GATE_FLAGS_ENABLED	((u32)1 << 5)	/* If SW_MANAGED */
+
+/*
+ * Gate initialization macros.
+ *
+ * Any gate initially under software control will be enabled.
+ */
+
+/* A hardware/software gate initially under software control */
+#define HW_SW_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, SW_MANAGED)|FLAG(GATE, ENABLED)|	\
+			FLAG(GATE, EXISTS),				\
+	}
+
+/* A hardware/software gate initially under hardware control */
+#define HW_SW_GATE_AUTO(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, EXISTS),				\
+	}
+
+/* A hardware-or-enabled gate (enabled if not under hardware control) */
+#define HW_ENABLE_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, NO_DISABLE)|FLAG(GATE, EXISTS),	\
+	}
+
+/* A software-only gate */
+#define SW_ONLY_GATE(_offset, _status_bit, _en_bit)			\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.flags = FLAG(GATE, SW)|FLAG(GATE, SW_MANAGED)|		\
+			FLAG(GATE, ENABLED)|FLAG(GATE, EXISTS),		\
+	}
+
+/* A hardware-only gate */
+#define HW_ONLY_GATE(_offset, _status_bit)				\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, EXISTS),		\
+	}
+
+/*
+ * Each clock can have zero, one, or two dividers which change the
+ * output rate of the clock.  Each divider can be either fixed or
+ * variable.  If there are two dividers, they are the "pre-divider"
+ * and the "regular" or "downstream" divider.  If there is only one,
+ * there is no pre-divider.
+ *
+ * A fixed divider is any non-zero (positive) value, and it
+ * indicates how the input rate is affected by the divider.
+ *
+ * The value of a variable divider is maintained in a sub-field of a
+ * 32-bit divider register.  The position of the field in the
+ * register is defined by its offset and width.  The value recorded
+ * in this field is always 1 less than the value it represents.
+ *
+ * In addition, a variable divider can indicate that some subset
+ * of its bits represent a "fractional" part of the divider.  Such
+ * bits comprise the low-order portion of the divider field, and can
+ * be viewed as representing the portion of the divider that lies to
+ * the right of the decimal point.  Most variable dividers have zero
+ * fractional bits.  Variable dividers with non-zero fraction width
+ * still record a value 1 less than the value they represent; the
+ * added 1 does *not* affect the low-order bit in this case, it
+ * affects the bits above the fractional part only.  (Often in this
+ * code a divider field value is distinguished from the value it
+ * represents by referring to the latter as a "divisor".)
+ *
+ * In order to avoid dealing with fractions, divider arithmetic is
+ * performed using "scaled" values.  A scaled value is one that's
+ * been left-shifted by the fractional width of a divider.  Dividing
+ * a scaled value by a scaled divisor produces the desired quotient
+ * without loss of precision and without any other special handling
+ * for fractions.
+ *
+ * The recorded value of a variable divider can be modified.  To
+ * modify either divider (or both), a clock must be enabled (i.e.,
+ * using its gate).  In addition, a trigger register (described
+ * below) must be used to commit the change, and polled to verify
+ * the change is complete.
+ */
+struct bcm_clk_div {
+	union {
+		struct {	/* variable divider */
+			u32 offset;	/* divider register offset */
+			u32 shift;	/* field shift */
+			u32 width;	/* field width */
+			u32 frac_width;	/* field fraction width */
+
+			u64 scaled_div;	/* scaled divider value */
+		};
+		u32 fixed;	/* non-zero fixed divider value */
+	};
+	u32 flags;		/* BCM_CLK_DIV_FLAGS_* below */
+};
+
+/*
+ * Divider flags:
+ *   EXISTS means this divider exists
+ *   FIXED means it is a fixed-rate divider
+ */
+#define BCM_CLK_DIV_FLAGS_EXISTS	((u32)1 << 0)	/* Divider is valid */
+#define BCM_CLK_DIV_FLAGS_FIXED		((u32)1 << 1)	/* Fixed-value */
+
+/* Divider initialization macros */
+
+/* A fixed (non-zero) divider */
+#define FIXED_DIVIDER(_value)						\
+	{								\
+		.fixed = (_value),					\
+		.flags = FLAG(DIV, EXISTS)|FLAG(DIV, FIXED),		\
+	}
+
+/* A divider with an integral divisor */
+#define DIVIDER(_offset, _shift, _width)				\
+	{								\
+		.offset = (_offset),					\
+		.shift = (_shift),					\
+		.width = (_width),					\
+		.scaled_div = BAD_SCALED_DIV_VALUE,			\
+		.flags = FLAG(DIV, EXISTS),				\
+	}
+
+/* A divider whose divisor has an integer and fractional part */
+#define FRAC_DIVIDER(_offset, _shift, _width, _frac_width)		\
+	{								\
+		.offset = (_offset),					\
+		.shift = (_shift),					\
+		.width = (_width),					\
+		.frac_width = (_frac_width),				\
+		.scaled_div = BAD_SCALED_DIV_VALUE,			\
+		.flags = FLAG(DIV, EXISTS),				\
+	}
+
+/*
+ * Clocks may have multiple "parent" clocks.  If there is more than
+ * one, a selector must be specified to define which of the parent
+ * clocks is currently in use.  The selected clock is indicated in a
+ * sub-field of a 32-bit selector register.  The range of
+ * representable selector values typically exceeds the number of
+ * available parent clocks.  Occasionally the reset value of a
+ * selector field is explicitly set to a (specific) value that does
+ * not correspond to a defined input clock.
+ *
+ * We register all known parent clocks with the common clock code
+ * using a packed array (i.e., no empty slots) of (parent) clock
+ * names, and refer to them later using indexes into that array.
+ * We maintain an array of selector values indexed by common clock
+ * index values in order to map between these common clock indexes
+ * and the selector values used by the hardware.
+ *
+ * Like dividers, a selector can be modified, but to do so a clock
+ * must be enabled, and a trigger must be used to commit the change.
+ */
+struct bcm_clk_sel {
+	u32 offset;		/* selector register offset */
+	u32 shift;		/* field shift */
+	u32 width;		/* field width */
+
+	u32 parent_count;	/* number of entries in parent_sel[] */
+	u32 *parent_sel;	/* array of parent selector values */
+	u8 clk_index;		/* current selected index in parent_sel[] */
+};
+
+/* Selector initialization macro */
+#define SELECTOR(_offset, _shift, _width)				\
+	{								\
+		.offset = (_offset),					\
+		.shift = (_shift),					\
+		.width = (_width),					\
+		.clk_index = BAD_CLK_INDEX,				\
+	}
+
+/*
+ * Making changes to a variable divider or a selector for a clock
+ * requires the use of a trigger.  A trigger is defined by a single
+ * bit within a register.  To signal a change, a 1 is written into
+ * that bit.  To determine when the change has been completed, that
+ * trigger bit is polled; the read value will be 1 while the change
+ * is in progress, and 0 when it is complete.
+ *
+ * Occasionally a clock will have more than one trigger.  In this
+ * case, the "pre-trigger" will be used when changing a clock's
+ * selector and/or its pre-divider.
+ */
+struct bcm_clk_trig {
+	u32 offset;		/* trigger register offset */
+	u32 bit;		/* trigger bit */
+	u32 flags;		/* BCM_CLK_TRIG_FLAGS_* below */
+};
+
+/*
+ * Trigger flags:
+ *   EXISTS means this trigger exists
+ */
+#define BCM_CLK_TRIG_FLAGS_EXISTS	((u32)1 << 0)	/* Trigger is valid */
+
+/* Trigger initialization macro */
+#define TRIGGER(_offset, _bit)						\
+	{								\
+		.offset = (_offset),					\
+		.bit = (_bit),						\
+		.flags = FLAG(TRIG, EXISTS),				\
+	}
+
+struct bus_clk_data {
+	struct bcm_clk_gate gate;
+};
+
+struct core_clk_data {
+	struct bcm_clk_gate gate;
+};
+
+struct peri_clk_data {
+	struct bcm_clk_gate gate;
+	struct bcm_clk_trig pre_trig;
+	struct bcm_clk_div pre_div;
+	struct bcm_clk_trig trig;
+	struct bcm_clk_div div;
+	struct bcm_clk_sel sel;
+	const char *clocks[];	/* must be last; use CLOCKS() to declare */
+};
+#define CLOCKS(...)	{ __VA_ARGS__, NULL, }
+#define NO_CLOCKS	{ NULL, }	/* Must use of no parent clocks */
+
+struct refclk {
+	struct clk clk;
+};
+
+struct peri_clock {
+	struct clk clk;
+	struct peri_clk_data *data;
+};
+
+struct ccu_clock {
+	struct clk clk;
+
+	int num_policy_masks;
+	unsigned long policy_freq_offset;
+	int freq_bit_shift;	/* 8 for most CCUs */
+	unsigned long policy_ctl_offset;
+	unsigned long policy0_mask_offset;
+	unsigned long policy1_mask_offset;
+	unsigned long policy2_mask_offset;
+	unsigned long policy3_mask_offset;
+	unsigned long policy0_mask2_offset;
+	unsigned long policy1_mask2_offset;
+	unsigned long policy2_mask2_offset;
+	unsigned long policy3_mask2_offset;
+	unsigned long lvm_en_offset;
+
+	int freq_id;
+	unsigned long *freq_tbl;
+};
+
+struct bus_clock {
+	struct clk clk;
+	struct bus_clk_data *data;
+	unsigned long *freq_tbl;
+};
+
+struct ref_clock {
+	struct clk clk;
+};
+
+static inline int is_same_clock(struct clk *a, struct clk *b)
+{
+	return (a == b);
+}
+
+#define to_clk(p) (&((p)->clk))
+#define name_to_clk(name) (&((name##_clk).clk))
+/* declare a struct clk_lookup */
+#define CLK_LK(name) \
+{.con_id = __stringify(name##_clk), .clk = name_to_clk(name),}
+
+static inline struct refclk *to_refclk(struct clk *clock)
+{
+	return container_of(clock, struct refclk, clk);
+}
+
+static inline struct peri_clock *to_peri_clk(struct clk *clock)
+{
+	return container_of(clock, struct peri_clock, clk);
+}
+
+static inline struct ccu_clock *to_ccu_clk(struct clk *clock)
+{
+	return container_of(clock, struct ccu_clock, clk);
+}
+
+static inline struct bus_clock *to_bus_clk(struct clk *clock)
+{
+	return container_of(clock, struct bus_clock, clk);
+}
+
+static inline struct ref_clock *to_ref_clk(struct clk *clock)
+{
+	return container_of(clock, struct ref_clock, clk);
+}
+
+extern struct clk_ops peri_clk_ops;
+extern struct clk_ops ccu_clk_ops;
+extern struct clk_ops bus_clk_ops;
+extern struct clk_ops ref_clk_ops;
+
+extern int clk_get_and_enable(char *clkstr);
diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-sdio.c b/arch/arm/cpu/armv7/bcm281xx/clk-sdio.c
new file mode 100644
index 0000000000..49badcbaa7
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/clk-sdio.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include "clk-core.h"
+
+/* Enable appropriate clocks for an SDIO port */
+int clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep)
+{
+	int ret;
+	struct clk *c;
+
+	char *clkstr;
+	char *slpstr;
+	char *ahbstr;
+
+	switch ((u32) base) {
+	case CONFIG_SYS_SDIO_BASE0:
+		clkstr = CONFIG_SYS_SDIO0 "_clk";
+		ahbstr = CONFIG_SYS_SDIO0 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO0 "_sleep_clk";
+		break;
+	case CONFIG_SYS_SDIO_BASE1:
+		clkstr = CONFIG_SYS_SDIO1 "_clk";
+		ahbstr = CONFIG_SYS_SDIO1 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO1 "_sleep_clk";
+		break;
+	case CONFIG_SYS_SDIO_BASE2:
+		clkstr = CONFIG_SYS_SDIO2 "_clk";
+		ahbstr = CONFIG_SYS_SDIO2 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO2 "_sleep_clk";
+		break;
+	case CONFIG_SYS_SDIO_BASE3:
+		clkstr = CONFIG_SYS_SDIO3 "_clk";
+		ahbstr = CONFIG_SYS_SDIO3 "_ahb_clk";
+		slpstr = CONFIG_SYS_SDIO3 "_sleep_clk";
+		break;
+	default:
+		printf("%s: base 0x%p not found\n", __func__, base);
+		return -EINVAL;
+	}
+
+	ret = clk_get_and_enable(ahbstr);
+	if (ret)
+		return ret;
+
+	ret = clk_get_and_enable(slpstr);
+	if (ret)
+		return ret;
+
+	c = clk_get(clkstr);
+	if (c) {
+		ret = clk_set_rate(c, rate);
+		if (ret)
+			return ret;
+
+		ret = clk_enable(c);
+		if (ret)
+			return ret;
+	} else {
+		printf("%s: Couldn't find %s\n", __func__, clkstr);
+		return -EINVAL;
+	}
+	*actual_ratep = rate;
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/bcm281xx/reset.c b/arch/arm/cpu/armv7/bcm281xx/reset.c
new file mode 100644
index 0000000000..3beb0ed9c7
--- /dev/null
+++ b/arch/arm/cpu/armv7/bcm281xx/reset.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sysmap.h>
+
+#define EN_MASK		0x08000000	/* Enable timer */
+#define SRSTEN_MASK	0x04000000	/* Enable soft reset */
+#define CLKS_SHIFT	20		/* Clock period shift */
+#define LD_SHIFT	0		/* Reload value shift */
+
+void reset_cpu(ulong ignored)
+{
+	/*
+	 * Set WD enable, RST enable,
+	 * 3.9 msec clock period (8), reload value (8*3.9ms)
+	 */
+	u32 reg = EN_MASK + SRSTEN_MASK + (8 << CLKS_SHIFT) + (8 << LD_SHIFT);
+	writel(reg, SECWD2_BASE_ADDR);
+
+	while (1)
+		;	/* loop forever till reset */
+}
diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk
index 247b7a522a..6c82c3b537 100644
--- a/arch/arm/cpu/armv7/config.mk
+++ b/arch/arm/cpu/armv7/config.mk
@@ -10,6 +10,9 @@
 PF_CPPFLAGS_ARMV7 := $(call cc-option, -march=armv7-a, -march=armv5)
 PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV7)
 
-# SEE README.arm-unaligned-accesses
+# On supported platforms we set the bit which causes us to trap on unaligned
+# memory access.  This is the opposite of what the compiler expects to be
+# the default so we must pass in -mno-unaligned-access so that it is aware
+# of our decision.
 PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,)
-PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
+PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED)
diff --git a/arch/arm/cpu/armv7/kona-common/Makefile b/arch/arm/cpu/armv7/kona-common/Makefile
new file mode 100644
index 0000000000..da225cb4f7
--- /dev/null
+++ b/arch/arm/cpu/armv7/kona-common/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright 2013 Broadcom Corporation.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= s_init.o
+obj-y	+= hwinit-common.o
+obj-y	+= clk-stubs.o
diff --git a/arch/arm/cpu/armv7/kona-common/clk-stubs.c b/arch/arm/cpu/armv7/kona-common/clk-stubs.c
new file mode 100644
index 0000000000..338e0e4962
--- /dev/null
+++ b/arch/arm/cpu/armv7/kona-common/clk-stubs.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <common.h>
+
+/*
+ * These weak functions are available to kona architectures that don't
+ * require clock enables from the driver code.
+ */
+int __weak clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep)
+{
+	return 0;
+}
+
+int __weak clk_bsc_enable(void *base, u32 rate, u32 *actual_ratep)
+{
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/kona-common/hwinit-common.c b/arch/arm/cpu/armv7/kona-common/hwinit-common.c
new file mode 100644
index 0000000000..f8b1e063cd
--- /dev/null
+++ b/arch/arm/cpu/armv7/kona-common/hwinit-common.c
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/sizes.h>
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
diff --git a/arch/arm/cpu/armv7/kona-common/s_init.c b/arch/arm/cpu/armv7/kona-common/s_init.c
new file mode 100644
index 0000000000..6066a73c54
--- /dev/null
+++ b/arch/arm/cpu/armv7/kona-common/s_init.c
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2014 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Early system init. Currently empty.
+ */
+void s_init(void)
+{
+}
diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
index 02aa129733..745603d0fe 100644
--- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
@@ -39,7 +39,11 @@ SECTIONS
 
 	. = ALIGN(4);
 	__image_copy_end = .;
-	_end = .;
+
+	.end :
+	{
+		*(.__end)
+	}
 
 	.bss :
 	{
diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
index 6f7261b7b8..78577b1d1c 100644
--- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
@@ -17,9 +17,6 @@
 #include <asm/arch/clocks_omap3.h>
 #include <linux/linkage.h>
 
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE	/* sdram load addr from config.mk */
-
 #ifdef CONFIG_SPL_BUILD
 ENTRY(save_boot_params)
 	ldr	r4, =omap3_boot_device
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 4dec73e9ec..029533c851 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -172,6 +172,20 @@ struct dplls omap4430_dplls_es1 = {
 	.ddr = NULL
 };
 
+struct dplls omap4430_dplls_es20 = {
+	.mpu = mpu_dpll_params_1200mhz,
+	.core = core_dpll_params_es2_1600mhz_ddr200mhz,
+	.per = per_dpll_params_1536mhz,
+	.iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
 struct dplls omap4430_dplls = {
 	.mpu = mpu_dpll_params_1200mhz,
 	.core = core_dpll_params_1600mhz,
@@ -413,6 +427,10 @@ void hw_data_init(void)
 	break;
 
 	case OMAP4430_ES2_0:
+	*dplls_data = &omap4430_dplls_es20;
+	*omap_vcores = &omap4430_volts;
+	break;
+
 	case OMAP4430_ES2_1:
 	case OMAP4430_ES2_2:
 	case OMAP4430_ES2_3:
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index ff328070f7..7292161f3c 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -432,7 +432,7 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = {
 	.control_srcomp_code_latch		= 0x4A002E84,
 	.control_ddr_control_ext_0		= 0x4A002E88,
 	.control_padconf_core_base		= 0x4A003400,
-	.control_std_fuse_opp_vdd_mpu_2		= 0x4A003B24,
+	.control_std_fuse_opp_vdd_mpu_2		= 0x4A003B20,
 	.control_port_emif1_sdram_config	= 0x4AE0C110,
 	.control_port_emif1_lpddr2_nvm_config	= 0x4AE0C114,
 	.control_port_emif2_sdram_config	= 0x4AE0C118,
diff --git a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
index a7c9c9d281..4282beb395 100644
--- a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
@@ -28,7 +28,11 @@ SECTIONS
 
 	. = ALIGN(4);
 	__image_copy_end = .;
-	_end = .;
+
+	.end :
+	{
+		*(.__end)
+	}
 
 	.bss : {
 		. = ALIGN(4);
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 5aac773644..ac1e55a708 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -70,29 +70,6 @@ _end_vect:
  *
  *************************************************************************/
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
diff --git a/arch/arm/cpu/armv7/zynq/u-boot.lds b/arch/arm/cpu/armv7/zynq/u-boot.lds
index a68b050f2b..f2a5965988 100644
--- a/arch/arm/cpu/armv7/zynq/u-boot.lds
+++ b/arch/arm/cpu/armv7/zynq/u-boot.lds
@@ -60,7 +60,12 @@ SECTIONS
 		*(.__rel_dyn_end)
 	}
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
 
 /*
  * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
diff --git a/arch/arm/cpu/armv8/config.mk b/arch/arm/cpu/armv8/config.mk
index 027a68ca57..f5b95591af 100644
--- a/arch/arm/cpu/armv8/config.mk
+++ b/arch/arm/cpu/armv8/config.mk
@@ -6,10 +6,7 @@
 #
 PLATFORM_RELFLAGS += -fno-common -ffixed-x18
 
-# SEE README.arm-unaligned-accesses
-PF_NO_UNALIGNED := $(call cc-option, -mstrict-align)
-PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
-
 PF_CPPFLAGS_ARMV8 := $(call cc-option, -march=armv8-a)
+PF_NO_UNALIGNED := $(call cc-option, -mstrict-align)
 PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV8)
 PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED)
diff --git a/arch/arm/cpu/at91-common/u-boot-spl.lds b/arch/arm/cpu/at91-common/u-boot-spl.lds
index 038335d3da..57ac1eb242 100644
--- a/arch/arm/cpu/at91-common/u-boot-spl.lds
+++ b/arch/arm/cpu/at91-common/u-boot-spl.lds
@@ -37,7 +37,11 @@ SECTIONS
 
 	. = ALIGN(4);
 	__image_copy_end = .;
-	_end = .;
+
+	.end :
+	{
+		*(.__end)
+	} >.sram
 
 	.bss :
 	{
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index d8fb812dbf..ae0d13ce8f 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -84,32 +84,6 @@ _end_vect:
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
@@ -316,7 +290,6 @@ cpu_init_crit:
 #ifdef CONFIG_SPL_BUILD
 	.align	5
 do_hang:
-	ldr	sp, _TEXT_BASE			/* use 32 words about stack */
 	bl	hang				/* hang and never return */
 #else	/* !CONFIG_SPL_BUILD */
 	.align	5
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index 27bcda598c..bf80937a7c 100644
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -56,32 +56,6 @@ _fiq:			.word fiq
  *************************************************************************
  */
 
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
-	.word	CONFIG_SPL_TEXT_BASE
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds
index 4880d0f78a..3e886680e8 100644
--- a/arch/arm/cpu/u-boot-spl.lds
+++ b/arch/arm/cpu/u-boot-spl.lds
@@ -42,7 +42,12 @@ SECTIONS
 		__rel_dyn_end = .;
 	}
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
 
 	.bss __rel_dyn_start (OVERLAY) : {
 		__bss_start = .;
@@ -51,7 +56,7 @@ SECTIONS
 		__bss_end = .;
 	}
 
-	.dynsym _end : { *(.dynsym) }
+	.dynsym _image_binary_end : { *(.dynsym) }
 	.dynbss : { *(.dynbss) }
 	.dynstr : { *(.dynstr*) }
 	.dynamic : { *(.dynamic*) }
diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
index 4da5d246e0..87c2de22f5 100644
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@ -60,7 +60,12 @@ SECTIONS
 		*(.__rel_dyn_end)
 	}
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
 
 	/*
 	 * Deprecated: this MMU section is used by pxa at present but
@@ -91,7 +96,7 @@ SECTIONS
 		KEEP(*(.__bss_end));
 	}
 
-	.dynsym _end : { *(.dynsym) }
+	.dynsym _image_binary_end : { *(.dynsym) }
 	.dynbss : { *(.dynbss) }
 	.dynstr : { *(.dynstr*) }
 	.dynamic : { *(.dynamic*) }
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 07362581cf..71bed4efab 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -171,7 +171,8 @@ struct cm_wkuppll {
 	unsigned int resv11[1];
 	unsigned int wkup_uart0ctrl;	/* offset 0xB4 */
 	unsigned int wkup_i2c0ctrl;	/* offset 0xB8 */
-	unsigned int resv12[7];
+	unsigned int wkup_adctscctrl;	/* offset 0xBC */
+	unsigned int resv12[6];
 	unsigned int divm6dpllcore;	/* offset 0xD8 */
 };
 
@@ -221,7 +222,8 @@ struct cm_perpll {
 	unsigned int tpccclkctrl;	/* offset 0xBC */
 	unsigned int dcan0clkctrl;	/* offset 0xC0 */
 	unsigned int dcan1clkctrl;	/* offset 0xC4 */
-	unsigned int resv6[2];
+	unsigned int resv6;
+	unsigned int epwmss1clkctrl;	/* offset 0xCC */
 	unsigned int emiffwclkctrl;	/* offset 0xD0 */
 	unsigned int epwmss0clkctrl;	/* offset 0xD4 */
 	unsigned int epwmss2clkctrl;	/* offset 0xD8 */
@@ -353,7 +355,11 @@ struct cm_perpll {
 	unsigned int gpio2clkctrl;	/* offset 0x480 */
 	unsigned int resv20;
 	unsigned int gpio3clkctrl;	/* offset 0x488 */
-	unsigned int resv21[7];
+	unsigned int resv41;
+	unsigned int gpio4clkctrl;	/* offset 0x490 */
+	unsigned int resv42;
+	unsigned int gpio5clkctrl;	/* offset 0x498 */
+	unsigned int resv21[3];
 
 	unsigned int i2c1clkctrl;	/* offset 0x4A8 */
 	unsigned int resv22;
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index fbe599d1ab..4d899528f5 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -58,6 +58,22 @@
 #define MT41J128MJT125_PHY_FIFO_WE		0x100
 #define MT41J128MJT125_IOCTRL_VALUE		0x18B
 
+/* Micron MT41K128M16JT-187E */
+#define MT41K128MJT187E_EMIF_READ_LATENCY	0x06
+#define MT41K128MJT187E_EMIF_TIM1		0x0888B3DB
+#define MT41K128MJT187E_EMIF_TIM2		0x36337FDA
+#define MT41K128MJT187E_EMIF_TIM3		0x501F830F
+#define MT41K128MJT187E_EMIF_SDCFG		0x61C04AB2
+#define MT41K128MJT187E_EMIF_SDREF		0x0000093B
+#define MT41K128MJT187E_ZQ_CFG			0x50074BE4
+#define MT41K128MJT187E_RATIO			0x40
+#define MT41K128MJT187E_INVERT_CLKOUT		0x1
+#define MT41K128MJT187E_RD_DQS			0x3B
+#define MT41K128MJT187E_WR_DQS			0x85
+#define MT41K128MJT187E_PHY_WR_DATA		0xC1
+#define MT41K128MJT187E_PHY_FIFO_WE		0x100
+#define MT41K128MJT187E_IOCTRL_VALUE		0x18B
+
 /* Micron MT41J64M16JT-125 */
 #define MT41J64MJT125_EMIF_SDCFG		0x61C04A32
 
diff --git a/arch/arm/include/asm/arch-am33xx/gpio.h b/arch/arm/include/asm/arch-am33xx/gpio.h
index a1ffd49f79..220603db5a 100644
--- a/arch/arm/include/asm/arch-am33xx/gpio.h
+++ b/arch/arm/include/asm/arch-am33xx/gpio.h
@@ -12,8 +12,8 @@
 #define AM33XX_GPIO1_BASE       0x4804C000
 #define AM33XX_GPIO2_BASE       0x481AC000
 #define AM33XX_GPIO3_BASE       0x481AE000
-
-#define GPIO_22			22
+#define AM33XX_GPIO4_BASE	0x48320000
+#define AM33XX_GPIO5_BASE	0x48322000
 
 /* GPIO CTRL register */
 #define GPIO_CTRL_DISABLEMODULE_SHIFT	0
diff --git a/arch/arm/include/asm/arch-bcm281xx/gpio.h b/arch/arm/include/asm/arch-bcm281xx/gpio.h
new file mode 100644
index 0000000000..1b40a96ad4
--- /dev/null
+++ b/arch/arm/include/asm/arch-bcm281xx/gpio.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#ifndef __ARCH_BCM281XX_GPIO_H
+#define __ARCH_BCM281XX_GPIO_H
+
+/*
+ * Empty file - cmd_gpio.c requires this. The implementation
+ * is in drivers/gpio/kona_gpio.c instead of inlined here.
+ */
+
+#endif
diff --git a/arch/arm/include/asm/arch-bcm281xx/sysmap.h b/arch/arm/include/asm/arch-bcm281xx/sysmap.h
new file mode 100644
index 0000000000..880b4e0907
--- /dev/null
+++ b/arch/arm/include/asm/arch-bcm281xx/sysmap.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#ifndef __ARCH_BCM281XX_SYSMAP_H
+
+#define BSC1_BASE_ADDR		0x3e016000
+#define BSC2_BASE_ADDR		0x3e017000
+#define BSC3_BASE_ADDR		0x3e018000
+#define GPIO2_BASE_ADDR		0x35003000
+#define KONA_MST_CLK_BASE_ADDR	0x3f001000
+#define KONA_SLV_CLK_BASE_ADDR	0x3e011000
+#define PMU_BSC_BASE_ADDR	0x3500d000
+#define PWRMGR_BASE_ADDR	0x35010000
+#define SDIO1_BASE_ADDR		0x3f180000
+#define SDIO2_BASE_ADDR		0x3f190000
+#define SDIO3_BASE_ADDR		0x3f1a0000
+#define SDIO4_BASE_ADDR		0x3f1b0000
+#define SECWD_BASE_ADDR		0x3500c000
+#define SECWD2_BASE_ADDR	0x35002f40
+#define TIMER_BASE_ADDR		0x3e00d000
+
+#endif
diff --git a/arch/arm/include/asm/kona-common/clk.h b/arch/arm/include/asm/kona-common/clk.h
new file mode 100644
index 0000000000..2c7e829994
--- /dev/null
+++ b/arch/arm/include/asm/kona-common/clk.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+/* This API file is loosely based on u-boot/drivers/video/ipu.h and linux */
+
+#ifndef __KONA_COMMON_CLK_H
+#define __KONA_COMMON_CLK_H
+
+#include <linux/types.h>
+
+struct clk;
+
+/* Only implement required functions for your specific architecture */
+int clk_init(void);
+struct clk *clk_get(const char *id);
+int clk_enable(struct clk *clk);
+void clk_disable(struct clk *clk);
+unsigned long clk_get_rate(struct clk *clk);
+long clk_round_rate(struct clk *clk, unsigned long rate);
+int clk_set_rate(struct clk *clk, unsigned long rate);
+int clk_set_parent(struct clk *clk, struct clk *parent);
+struct clk *clk_get_parent(struct clk *clk);
+int clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep);
+int clk_bsc_enable(void *base);
+
+#endif
diff --git a/arch/arm/include/asm/kona-common/kona_sdhci.h b/arch/arm/include/asm/kona-common/kona_sdhci.h
new file mode 100644
index 0000000000..1ff0e55d13
--- /dev/null
+++ b/arch/arm/include/asm/kona-common/kona_sdhci.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#ifndef __KONA_SDHCI_H
+#define __KONA_SDHCI_H
+
+int kona_sdhci_init(int dev_index, u32 min_clk, u32 quirks);
+
+#endif
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 321997c332..45febcfd98 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -32,7 +32,6 @@ endif
 ifndef CONFIG_SYS_GENERIC_BOARD
 obj-y	+= board.o
 endif
-obj-y	+= sections.o
 
 obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o
 obj-$(CONFIG_CMD_BOOTM) += bootm.o
@@ -43,6 +42,7 @@ else
 obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
 endif
 
+obj-y	+= sections.o
 ifdef CONFIG_ARM64
 obj-y	+= interrupts_64.o
 else
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index ba62394a9d..e9a7708ce8 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -105,8 +105,8 @@ static int display_banner(void)
 {
 	printf("\n\n%s\n\n", version_string);
 	debug("U-Boot code: %08lX -> %08lX  BSS: -> %08lX\n",
-	       _TEXT_BASE,
-	       _bss_start_ofs + _TEXT_BASE, _bss_end_ofs + _TEXT_BASE);
+	       (ulong)&_start,
+	       (ulong)&__bss_start, (ulong)&__bss_end);
 #ifdef CONFIG_MODEM_SUPPORT
 	debug("Modem Support enabled\n");
 #endif
@@ -273,13 +273,13 @@ void board_init_f(ulong bootflag)
 
 	memset((void *)gd, 0, sizeof(gd_t));
 
-	gd->mon_len = _bss_end_ofs;
+	gd->mon_len = (ulong)&__bss_end - (ulong)_start;
 #ifdef CONFIG_OF_EMBED
 	/* Get a pointer to the FDT */
 	gd->fdt_blob = __dtb_db_begin;
 #elif defined CONFIG_OF_SEPARATE
 	/* FDT is at end of image */
-	gd->fdt_blob = (void *)(_end_ofs + _TEXT_BASE);
+	gd->fdt_blob = &_end;
 #endif
 	/* Allow the early environment to override the fdt address */
 	gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
@@ -451,7 +451,7 @@ void board_init_f(ulong bootflag)
 
 	gd->relocaddr = addr;
 	gd->start_addr_sp = addr_sp;
-	gd->reloc_off = addr - _TEXT_BASE;
+	gd->reloc_off = addr - (ulong)&_start;
 	debug("relocation Offset is: %08lx\n", gd->reloc_off);
 	if (new_fdt) {
 		memcpy(new_fdt, gd->fdt_blob, fdt_size);
@@ -516,7 +516,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
 	bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
 
-	monitor_flash_len = _end_ofs;
+	monitor_flash_len = (ulong)&__rel_dyn_end - (ulong)_start;
 
 	/* Enable caches */
 	enable_caches();
diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c
index 603bf14627..758b01371e 100644
--- a/arch/arm/lib/interrupts.c
+++ b/arch/arm/lib/interrupts.c
@@ -153,7 +153,7 @@ void do_prefetch_abort (struct pt_regs *pt_regs)
 
 void do_data_abort (struct pt_regs *pt_regs)
 {
-	printf ("data abort\n\n    MAYBE you should read doc/README.arm-unaligned-accesses\n\n");
+	printf ("data abort\n");
 	show_regs (pt_regs);
 	bad_mode ();
 }
diff --git a/arch/arm/lib/sections.c b/arch/arm/lib/sections.c
index e35687c09c..5b30bcb9a5 100644
--- a/arch/arm/lib/sections.c
+++ b/arch/arm/lib/sections.c
@@ -25,3 +25,4 @@ char __image_copy_start[0] __attribute__((section(".__image_copy_start")));
 char __image_copy_end[0] __attribute__((section(".__image_copy_end")));
 char __rel_dyn_start[0] __attribute__((section(".__rel_dyn_start")));
 char __rel_dyn_end[0] __attribute__((section(".__rel_dyn_end")));
+char _end[0] __attribute__((section(".__end")));
diff --git a/board/Barix/ipam390/u-boot-spl-ipam390.lds b/board/Barix/ipam390/u-boot-spl-ipam390.lds
index 5480d1f276..8604696be7 100644
--- a/board/Barix/ipam390/u-boot-spl-ipam390.lds
+++ b/board/Barix/ipam390/u-boot-spl-ipam390.lds
@@ -49,5 +49,9 @@ SECTIONS
 	} >.sram
 
 	__image_copy_end = .;
-	_end = .;
+
+	.end :
+	{
+		*(.__end)
+	} >.sram
 }
diff --git a/board/BuR/common/bur_common.h b/board/BuR/common/bur_common.h
new file mode 100644
index 0000000000..15225b0724
--- /dev/null
+++ b/board/BuR/common/bur_common.h
@@ -0,0 +1,22 @@
+/*
+ * bur_comon.h
+ *
+ * common board information header for B&R boards
+ *
+ * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at>
+ * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _BUR_COMMON_H_
+#define _BUR_COMMON_H_
+
+void blink(u32 blinks, u32 intervall, u32 pin);
+void pmicsetup(u32 mpupll);
+void enable_uart0_pin_mux(void);
+void enable_i2c0_pin_mux(void);
+void enable_board_pin_mux(void);
+int board_eth_init(bd_t *bis);
+
+#endif
diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c
new file mode 100644
index 0000000000..6d187eaab2
--- /dev/null
+++ b/board/BuR/common/common.c
@@ -0,0 +1,216 @@
+/*
+ * common.c
+ *
+ * common board functions for B&R boards
+ *
+ * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at>
+ * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include <power/tps65217.h>
+#include "bur_common.h"
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+/* --------------------------------------------------------------------------*/
+void blink(u32 blinks, u32 intervall, u32 pin)
+{
+	gpio_direction_output(pin, 0);
+	int val = 0;
+
+	do {
+		val ^= 0x01;
+		gpio_set_value(pin, val);
+		mdelay(intervall);
+	} while (blinks--);
+
+	gpio_set_value(pin, 0);
+}
+#ifdef CONFIG_SPL_BUILD
+void pmicsetup(u32 mpupll)
+{
+	int mpu_vdd;
+	int usb_cur_lim;
+
+	/* setup I2C */
+	enable_i2c0_pin_mux();
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+
+	if (i2c_probe(TPS65217_CHIP_PM)) {
+		puts("PMIC (0x24) not found! skip further initalization.\n");
+		return;
+	}
+
+	/* Get the frequency which is defined by device fuses */
+	dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
+	printf("detected max. frequency: %d - ", dpll_mpu_opp100.m);
+
+	if (0 != mpupll) {
+		dpll_mpu_opp100.m = MPUPLL_M_1000;
+		printf("retuning MPU-PLL to: %d MHz.\n", dpll_mpu_opp100.m);
+	} else {
+		puts("ok.\n");
+	}
+	/*
+	 * Increase USB current limit to 1300mA or 1800mA and set
+	 * the MPU voltage controller as needed.
+	 */
+	if (dpll_mpu_opp100.m == MPUPLL_M_1000) {
+		usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA;
+		mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
+	} else {
+		usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA;
+		mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV;
+	}
+
+	if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, TPS65217_POWER_PATH,
+			       usb_cur_lim, TPS65217_USB_INPUT_CUR_LIMIT_MASK))
+		puts("tps65217_reg_write failure\n");
+
+	/* Set DCDC3 (CORE) voltage to 1.125V */
+	if (tps65217_voltage_update(TPS65217_DEFDCDC3,
+				    TPS65217_DCDC_VOLT_SEL_1125MV)) {
+		puts("tps65217_voltage_update failure\n");
+		return;
+	}
+
+	/* Set CORE Frequencies to OPP100 */
+	do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
+
+	/* Set DCDC2 (MPU) voltage */
+	if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
+		puts("tps65217_voltage_update failure\n");
+		return;
+	}
+
+	/* Set LDO3 to 1.8V */
+	if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
+			       TPS65217_DEFLS1,
+			       TPS65217_LDO_VOLTAGE_OUT_1_8,
+			       TPS65217_LDO_MASK))
+		puts("tps65217_reg_write failure\n");
+	/* Set LDO4 to 3.3V */
+	if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
+			       TPS65217_DEFLS2,
+			       TPS65217_LDO_VOLTAGE_OUT_3_3,
+			       TPS65217_LDO_MASK))
+		puts("tps65217_reg_write failure\n");
+
+	/* Set MPU Frequency to what we detected now that voltages are set */
+	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
+}
+
+void set_uart_mux_conf(void)
+{
+	enable_uart0_pin_mux();
+}
+
+void set_mux_conf_regs(void)
+{
+	enable_board_pin_mux();
+}
+
+#endif /* CONFIG_SPL_BUILD */
+
+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
+	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+static void cpsw_control(int enabled)
+{
+	/* VTP can be added here */
+	return;
+}
+
+/* describing port offsets of TI's CPSW block */
+static struct cpsw_slave_data cpsw_slaves[] = {
+	{
+		.slave_reg_ofs	= 0x208,
+		.sliver_reg_ofs	= 0xd80,
+		.phy_id		= 0,
+	},
+	{
+		.slave_reg_ofs	= 0x308,
+		.sliver_reg_ofs	= 0xdc0,
+		.phy_id		= 1,
+	},
+};
+
+static struct cpsw_platform_data cpsw_data = {
+	.mdio_base		= CPSW_MDIO_BASE,
+	.cpsw_base		= CPSW_BASE,
+	.mdio_div		= 0xff,
+	.channels		= 8,
+	.cpdma_reg_ofs		= 0x800,
+	.slaves			= 1,
+	.slave_data		= cpsw_slaves,
+	.ale_reg_ofs		= 0xd00,
+	.ale_entries		= 1024,
+	.host_port_reg_ofs	= 0x108,
+	.hw_stats_reg_ofs	= 0x900,
+	.bd_ram_ofs		= 0x2000,
+	.mac_control		= (1 << 5),
+	.control		= cpsw_control,
+	.host_port_num		= 0,
+	.version		= CPSW_CTRL_VERSION_2,
+};
+#endif /* CONFIG_DRIVER_TI_CPSW, ... */
+
+#if defined(CONFIG_DRIVER_TI_CPSW)
+
+int board_eth_init(bd_t *bis)
+{
+	int rv = 0;
+	uint8_t mac_addr[6];
+	uint32_t mac_hi, mac_lo;
+
+	/* try reading mac address from efuse */
+	mac_lo = readl(&cdev->macid0l);
+	mac_hi = readl(&cdev->macid0h);
+	mac_addr[0] = mac_hi & 0xFF;
+	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+	mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+	mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+	mac_addr[4] = mac_lo & 0xFF;
+	mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+
+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
+	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+	if (!getenv("ethaddr")) {
+		printf("<ethaddr> not set. Validating first E-fuse MAC ... ");
+
+		if (is_valid_ether_addr(mac_addr)) {
+			printf("using: %02X:%02X:%02X:%02X:%02X:%02X.\n",
+			       mac_addr[0], mac_addr[1], mac_addr[2],
+			       mac_addr[3], mac_addr[4], mac_addr[5]
+				);
+			eth_setenv_enetaddr("ethaddr", mac_addr);
+		}
+	}
+	writel(MII_MODE_ENABLE, &cdev->miisel);
+	cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_MII;
+	cpsw_slaves[1].phy_if =	PHY_INTERFACE_MODE_MII;
+
+	rv = cpsw_register(&cpsw_data);
+	if (rv < 0) {
+		printf("Error %d registering CPSW switch\n", rv);
+		return 0;
+	}
+#endif /* CONFIG_DRIVER_TI_CPSW, ... */
+	return rv;
+}
+#endif /* CONFIG_DRIVER_TI_CPSW */
diff --git a/board/BuR/kwb/Makefile b/board/BuR/kwb/Makefile
new file mode 100644
index 0000000000..7b04b26ae4
--- /dev/null
+++ b/board/BuR/kwb/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile
+#
+# Copyright (C) 2014 Hannes Petermaier <oe5hpm@oevsv.at> -
+# Bernecker & Rainer Industrielektronik GmbH - http://www.br-automation.com/
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-$(CONFIG_SPL_BUILD) += mux.o
+obj-y	+= ../common/common.o
+obj-y	+= board.o
diff --git a/board/BuR/kwb/board.c b/board/BuR/kwb/board.c
new file mode 100644
index 0000000000..8aa16bcf80
--- /dev/null
+++ b/board/BuR/kwb/board.c
@@ -0,0 +1,240 @@
+/*
+ * board.c
+ *
+ * Board functions for B&R KWB Board
+ *
+ * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at>
+ * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <power/tps65217.h>
+#include "../common/bur_common.h"
+
+/* -------------------------------------------------------------------------*/
+/* -- defines for used GPIO Hardware -- */
+#define KEY						(0+4)
+#define LCD_PWR						(0+5)
+#define PUSH_KEY					(0+31)
+#define USB2SD_NRST					(32+29)
+#define USB2SD_PWR					(96+13)
+/* -------------------------------------------------------------------------*/
+/* -- PSOC Resetcontroller Register defines -- */
+
+/* I2C Address of controller */
+#define	RSTCTRL_ADDR				0x75
+/* Register for CTRL-word */
+#define RSTCTRL_CTRLREG				0x01
+/* Register for giving some information to VxWorks OS */
+#define RSTCTRL_SCRATCHREG			0x04
+
+/* -- defines for RSTCTRL_CTRLREG  -- */
+#define	RSTCTRL_FORCE_PWR_NEN			0x0404
+
+#if defined(CONFIG_SPL_BUILD)
+/* TODO: check ram-timing ! */
+static const struct ddr_data ddr3_data = {
+	.datardsratio0 = MT41K256M16HA125E_RD_DQS,
+	.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
+	.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
+	.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
+};
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+	.cmd0csratio = MT41K256M16HA125E_RATIO,
+	.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+	.cmd1csratio = MT41K256M16HA125E_RATIO,
+	.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+	.cmd2csratio = MT41K256M16HA125E_RATIO,
+	.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+};
+static struct emif_regs ddr3_emif_reg_data = {
+	.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
+	.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
+	.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
+	.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
+	.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
+	.zq_config = MT41K256M16HA125E_ZQ_CFG,
+	.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
+};
+
+static const struct ctrl_ioregs ddr3_ioregs = {
+	.cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+	.cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+	.cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+	.dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+	.dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+};
+
+#define OSC	(V_OSCK/1000000)
+const struct dpll_params dpll_ddr3 = { 400, OSC-1, 1, -1, -1, -1, -1};
+
+void am33xx_spl_board_init(void)
+{
+	unsigned int oldspeed;
+	unsigned short buf;
+
+	struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER;
+	struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP;
+	/*
+	 * enable additional clocks of modules which are accessed later from
+	 * VxWorks OS
+	 */
+	u32 *const clk_domains[] = { 0 };
+
+	u32 *const clk_modules_kwbspecific[] = {
+		&cmwkup->wkup_adctscctrl,
+		&cmper->spi1clkctrl,
+		&cmper->dcan0clkctrl,
+		&cmper->dcan1clkctrl,
+		&cmper->epwmss0clkctrl,
+		&cmper->epwmss1clkctrl,
+		&cmper->epwmss2clkctrl,
+		0
+	};
+	do_enable_clocks(clk_domains, clk_modules_kwbspecific, 1);
+
+	/* power-OFF LCD-Display */
+	gpio_direction_output(LCD_PWR, 0);
+
+	/* setup I2C */
+	enable_i2c0_pin_mux();
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+
+	/* power-ON  3V3 via Resetcontroller */
+	oldspeed = i2c_get_bus_speed();
+	if (0 != i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC)) {
+		buf = RSTCTRL_FORCE_PWR_NEN;
+		i2c_write(RSTCTRL_ADDR, RSTCTRL_CTRLREG, 1,
+			  (uint8_t *)&buf, sizeof(buf));
+		i2c_set_bus_speed(oldspeed);
+	} else {
+		puts("ERROR: i2c_set_bus_speed failed! (turn on PWR_nEN)\n");
+	}
+
+#if defined(CONFIG_AM335X_USB0)
+	/* power on USB2SD Controller */
+	gpio_direction_output(USB2SD_PWR, 1);
+	mdelay(1);
+	/* give a reset Pulse to USB2SD Controller */
+	gpio_direction_output(USB2SD_NRST, 0);
+	mdelay(1);
+	gpio_set_value(USB2SD_NRST, 1);
+#endif
+	pmicsetup(0);
+}
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+	return &dpll_ddr3;
+}
+
+void sdram_init(void)
+{
+	config_ddr(400, &ddr3_ioregs,
+		   &ddr3_data,
+		   &ddr3_cmd_ctrl_data,
+		   &ddr3_emif_reg_data, 0);
+}
+#endif /* CONFIG_SPL_BUILD */
+/*
+ * Basic board specific setup.  Pinmux has been handled already.
+ */
+int board_init(void)
+{
+	gpmc_init();
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	const unsigned int ton  = 250;
+	const unsigned int toff = 1000;
+	unsigned int cnt  = 3;
+	unsigned short buf = 0xAAAA;
+	unsigned int oldspeed;
+
+	tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
+			   TPS65217_WLEDCTRL2, 0x32, 0xFF); /* 50% dimlevel */
+
+	if (gpio_get_value(KEY)) {
+		do {
+			/* turn on light */
+			tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
+					   TPS65217_WLEDCTRL1, 0x09, 0xFF);
+			mdelay(ton);
+			/* turn off light */
+			tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
+					   TPS65217_WLEDCTRL1, 0x01, 0xFF);
+			mdelay(toff);
+			cnt--;
+			if (!gpio_get_value(KEY) &&
+			    gpio_get_value(PUSH_KEY) && 1 == cnt) {
+				puts("updating from USB ...\n");
+				setenv("bootcmd", "run usbupdate");
+				break;
+			} else if (!gpio_get_value(KEY)) {
+				break;
+			}
+		} while (cnt);
+	}
+
+	switch (cnt) {
+	case 0:
+		puts("3 blinks ... entering BOOT mode.\n");
+		buf = 0x0000;
+		break;
+	case 1:
+		puts("2 blinks ... entering DIAGNOSE mode.\n");
+		buf = 0x0F0F;
+		break;
+	case 2:
+		puts("1 blinks ... entering SERVICE mode.\n");
+		buf = 0xB4B4;
+		break;
+	case 3:
+		puts("0 blinks ... entering RUN mode.\n");
+		buf = 0x0404;
+		break;
+	}
+	mdelay(ton);
+	/* turn on light */
+	tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
+			   TPS65217_WLEDCTRL1, 0x09, 0xFF);
+	/* write bootinfo into scratchregister of resetcontroller */
+	oldspeed = i2c_get_bus_speed();
+	if (0 != i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC)) {
+		i2c_write(RSTCTRL_ADDR, RSTCTRL_SCRATCHREG, 1,
+			  (uint8_t *)&buf, sizeof(buf));
+		i2c_set_bus_speed(oldspeed);
+	} else {
+		puts("ERROR: i2c_set_bus_speed failed! (scratchregister)\n");
+	}
+	/*
+	 * reset VBAR registers to its reset location, VxWorks 6.9.3.2 does
+	 * expect that vectors are there, original u-boot moves them to _start
+	 */
+	__asm__("ldr r0,=0x20000");
+	__asm__("mcr p15, 0, r0, c12, c0, 0"); /* Set VBAR */
+
+	return 0;
+}
+#endif /* CONFIG_BOARD_LATE_INIT */
diff --git a/board/BuR/kwb/mux.c b/board/BuR/kwb/mux.c
new file mode 100644
index 0000000000..1a5ffd5709
--- /dev/null
+++ b/board/BuR/kwb/mux.c
@@ -0,0 +1,195 @@
+/*
+ * mux.c
+ *
+ * Pinmux Setting for B&R LEIT Board(s)
+ *
+ * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at>
+ * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include <i2c.h>
+
+static struct module_pin_mux usb0_pin_mux[] = {
+	{OFFSET(usb0_id), (MODE(0) | RXACTIVE)},
+	/* USB0 DrvBus Receiver disable (from romcode 0x20) */
+	{OFFSET(usb0_drvvbus), (MODE(0))},
+	/* USB1 DrvBus as GPIO due to HW-Workaround */
+	{OFFSET(usb1_drvvbus), (MODE(7))},
+	{-1},
+};
+static struct module_pin_mux spi1_pin_mux[] = {
+	/* SPI1_SCLK */
+	{OFFSET(mcasp0_aclkx), MODE(3) | PULLUDEN |             RXACTIVE},
+	/* SPI1_D0 */
+	{OFFSET(mcasp0_fsx),   MODE(3) | PULLUDEN |		RXACTIVE},
+	/* SPI1_D1 */
+	{OFFSET(mcasp0_axr0),  MODE(3) | PULLUDEN |             RXACTIVE},
+	/* SPI1_CS0 */
+	{OFFSET(mcasp0_ahclkr), MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE},
+	{-1},
+};
+
+static struct module_pin_mux dcan0_pin_mux[] = {
+	/* DCAN0 TX */
+	{OFFSET(uart1_ctsn),   MODE(2) | PULLUDEN | PULLUP_EN},
+	/* DCAN0 RX */
+	{OFFSET(uart1_rtsn),   MODE(2) | RXACTIVE},
+	{-1},
+};
+
+static struct module_pin_mux dcan1_pin_mux[] = {
+	/* DCAN1 TX */
+	{OFFSET(uart1_rxd),   MODE(2) | PULLUDEN | PULLUP_EN},
+	/* DCAN1 RX */
+	{OFFSET(uart1_txd),   MODE(2) | RXACTIVE},
+	{-1},
+};
+
+static struct module_pin_mux gpios[] = {
+	/* GPIO0_29 (RMII1_REFCLK) - eMMC nRST */
+	{OFFSET(rmii1_refclk), (MODE(7) | PULLUDDIS)},
+	/* GPIO0_4  (SPI D1) - TA602 */
+	{OFFSET(spi0_d1), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO0_5  (SPI CS0) - DISPLAY_ON_OFF */
+	{OFFSET(spi0_cs0), (MODE(7) | PULLUDDIS)},
+	/* GPIO0_7  (PWW0 OUT) - CAN TERM */
+	{OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO0_19 (DMA_INTR0) - CLKOUT SYS */
+	{OFFSET(xdma_event_intr0), (MODE(7) | RXACTIVE)},
+	/* GPIO0_20 (DMA_INTR1) - SPI1 nCS1 */
+	{OFFSET(xdma_event_intr1), (MODE(7) | PULLUDEN | PULLUP_EN)},
+	/* GPIO0_30 (GPMC_WAIT0) - TA601 */
+	{OFFSET(gpmc_wait0), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO0_31 (GPMC_nWP) - SW601 PushButton */
+	{OFFSET(gpmc_wpn), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO1_28 (GPMC_nWE) - FRAM_nWP */
+	{OFFSET(gpmc_be1n), (MODE(7) | PULLUDDIS)},
+	/* GPIO2_0  (GPMC_nCS3)	- VBAT_OK */
+	{OFFSET(gpmc_csn3), (MODE(7) | PULLUDDIS | RXACTIVE) },
+	/* GPIO2_2  (GPMC_nADV_ALE) - DCOK */
+	{OFFSET(gpmc_advn_ale), (MODE(7) | PULLUDDIS | RXACTIVE)},
+	/* GPIO2_4  (GPMC_nWE) - TST_BAST */
+	{OFFSET(gpmc_wen), (MODE(7) | PULLUDDIS)},
+	/* GPIO3_18 (MCASP0_ACLKR) - SW601 CNTup, mapped to Counter eQEB0A_in */
+	{OFFSET(mcasp0_aclkr), (MODE(1) | PULLUDDIS | RXACTIVE)},
+	/* GPIO3_19 (MCASP0_FSR) - SW601 CNTdown, mapped to Counter eQEB0B_in */
+	{OFFSET(mcasp0_fsr), (MODE(1) | PULLUDDIS | RXACTIVE)},
+	/* GPIO3_20 (MCASP0_AXR1) - SW601 CNTdown, map to Counter eQEB0_index */
+	{OFFSET(mcasp0_axr1), (MODE(1) | PULLUDDIS | RXACTIVE)},
+	{-1},
+};
+
+static struct module_pin_mux uart0_pin_mux[] = {
+	/* UART0_CTS */
+	{OFFSET(uart0_ctsn), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* UART0_RXD */
+	{OFFSET(uart0_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* UART0_TXD */
+	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},
+	{-1},
+};
+
+static struct module_pin_mux i2c0_pin_mux[] = {
+	/* I2C_DATA */
+	{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
+	/* I2C_SCLK */
+	{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
+	{-1},
+};
+
+static struct module_pin_mux mii1_pin_mux[] = {
+	{OFFSET(mii1_rxerr), MODE(0) | RXACTIVE},	/* MII1_RXERR */
+	{OFFSET(mii1_txen), MODE(0)},			/* MII1_TXEN */
+	{OFFSET(mii1_rxdv), MODE(0) | RXACTIVE},	/* MII1_RXDV */
+	{OFFSET(mii1_txd3), MODE(0)},			/* MII1_TXD3 */
+	{OFFSET(mii1_txd2), MODE(0)},			/* MII1_TXD2 */
+	{OFFSET(mii1_txd1), MODE(0)},			/* MII1_TXD1 */
+	{OFFSET(mii1_txd0), MODE(0)},			/* MII1_TXD0 */
+	{OFFSET(mii1_txclk), MODE(0) | RXACTIVE},	/* MII1_TXCLK */
+	{OFFSET(mii1_rxclk), MODE(0) | RXACTIVE},	/* MII1_RXCLK */
+	{OFFSET(mii1_rxd3), MODE(0) | RXACTIVE},	/* MII1_RXD3 */
+	{OFFSET(mii1_rxd2), MODE(0) | RXACTIVE},	/* MII1_RXD2 */
+	{OFFSET(mii1_rxd1), MODE(0) | RXACTIVE},	/* MII1_RXD1 */
+	{OFFSET(mii1_rxd0), MODE(0) | RXACTIVE},	/* MII1_RXD0 */
+	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
+	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},	/* MDIO_CLK */
+	{-1},
+};
+
+static struct module_pin_mux mmc1_pin_mux[] = {
+	{OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT3 */
+	{OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT2 */
+	{OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT1 */
+	{OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT0 */
+	{OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)},	/* MMC1_CLK */
+	{OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)},	/* MMC1_CMD */
+	{OFFSET(gpmc_csn0), (MODE(7) | RXACTIVE | PULLUP_EN)},	/* MMC1_WP */
+	{OFFSET(gpmc_advn_ale), (MODE(7) | RXACTIVE | PULLUP_EN)},/* MMC1_CD */
+
+	{-1},
+};
+
+static struct module_pin_mux lcd_pin_mux[] = {
+	{OFFSET(lcd_data0), (MODE(0) | PULLUDDIS)},	/* LCD-Data(0) */
+	{OFFSET(lcd_data1), (MODE(0) | PULLUDDIS)},	/* LCD-Data(1) */
+	{OFFSET(lcd_data2), (MODE(0) | PULLUDDIS)},	/* LCD-Data(2) */
+	{OFFSET(lcd_data3), (MODE(0) | PULLUDDIS)},	/* LCD-Data(3) */
+	{OFFSET(lcd_data4), (MODE(0) | PULLUDDIS)},	/* LCD-Data(4) */
+	{OFFSET(lcd_data5), (MODE(0) | PULLUDDIS)},	/* LCD-Data(5) */
+	{OFFSET(lcd_data6), (MODE(0) | PULLUDDIS)},	/* LCD-Data(6) */
+	{OFFSET(lcd_data7), (MODE(0) | PULLUDDIS)},	/* LCD-Data(7) */
+	{OFFSET(lcd_data8), (MODE(0) | PULLUDDIS)},	/* LCD-Data(8) */
+	{OFFSET(lcd_data9), (MODE(0) | PULLUDDIS)},	/* LCD-Data(9) */
+	{OFFSET(lcd_data10), (MODE(0) | PULLUDDIS)},	/* LCD-Data(10) */
+	{OFFSET(lcd_data11), (MODE(0) | PULLUDDIS)},	/* LCD-Data(11) */
+	{OFFSET(lcd_data12), (MODE(0) | PULLUDDIS)},	/* LCD-Data(12) */
+	{OFFSET(lcd_data13), (MODE(0) | PULLUDDIS)},	/* LCD-Data(13) */
+	{OFFSET(lcd_data14), (MODE(0) | PULLUDDIS)},	/* LCD-Data(14) */
+	{OFFSET(lcd_data15), (MODE(0) | PULLUDDIS)},	/* LCD-Data(15) */
+
+	{OFFSET(gpmc_ad8), (MODE(1) | PULLUDDIS)},	/* LCD-Data(16) */
+	{OFFSET(gpmc_ad9), (MODE(1) | PULLUDDIS)},	/* LCD-Data(17) */
+	{OFFSET(gpmc_ad10), (MODE(1) | PULLUDDIS)},	/* LCD-Data(18) */
+	{OFFSET(gpmc_ad11), (MODE(1) | PULLUDDIS)},	/* LCD-Data(19) */
+	{OFFSET(gpmc_ad12), (MODE(1) | PULLUDDIS)},	/* LCD-Data(20) */
+	{OFFSET(gpmc_ad13), (MODE(1) | PULLUDDIS)},	/* LCD-Data(21) */
+	{OFFSET(gpmc_ad14), (MODE(1) | PULLUDDIS)},	/* LCD-Data(22) */
+	{OFFSET(gpmc_ad15), (MODE(1) | PULLUDDIS)},	/* LCD-Data(23) */
+
+	{OFFSET(lcd_vsync), (MODE(0) | PULLUDDIS)},	/* LCD-VSync */
+	{OFFSET(lcd_hsync), (MODE(0) | PULLUDDIS)},	/* LCD-HSync */
+	{OFFSET(lcd_ac_bias_en), (MODE(0) | PULLUDDIS)},/* LCD-DE */
+	{OFFSET(lcd_pclk), (MODE(0) | PULLUDDIS)},	/* LCD-CLK */
+
+	{-1},
+};
+
+void enable_uart0_pin_mux(void)
+{
+	configure_module_pin_mux(uart0_pin_mux);
+}
+
+void enable_i2c0_pin_mux(void)
+{
+	configure_module_pin_mux(i2c0_pin_mux);
+}
+
+void enable_board_pin_mux(void)
+{
+	configure_module_pin_mux(i2c0_pin_mux);
+	configure_module_pin_mux(mii1_pin_mux);
+	configure_module_pin_mux(usb0_pin_mux);
+	configure_module_pin_mux(spi1_pin_mux);
+	configure_module_pin_mux(dcan0_pin_mux);
+	configure_module_pin_mux(dcan1_pin_mux);
+	configure_module_pin_mux(mmc1_pin_mux);
+	configure_module_pin_mux(lcd_pin_mux);
+	configure_module_pin_mux(gpios);
+}
diff --git a/board/BuR/tseries/Makefile b/board/BuR/tseries/Makefile
new file mode 100644
index 0000000000..ec0d27a7aa
--- /dev/null
+++ b/board/BuR/tseries/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile
+#
+# Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at>
+# Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+ifeq ($(CONFIG_SPL_BUILD),y)
+obj-y	:= mux.o
+endif
+obj-y	+= ../common/common.o
+obj-y	+= board.o
diff --git a/board/BuR/tseries/board.c b/board/BuR/tseries/board.c
new file mode 100644
index 0000000000..f0510e599e
--- /dev/null
+++ b/board/BuR/tseries/board.c
@@ -0,0 +1,147 @@
+/*
+ * board.c
+ *
+ * Board functions for B&R LEIT Board
+ *
+ * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at>
+ * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <power/tps65217.h>
+#include "../common/bur_common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* --------------------------------------------------------------------------*/
+/* -- defines for GPIO -- */
+#define	ETHLED_ORANGE	(96+16)	/* GPIO3_16 */
+#define	REPSWITCH	(0+20)	/* GPIO0_20 */
+
+
+#if defined(CONFIG_SPL_BUILD)
+/* TODO: check ram-timing ! */
+static const struct ddr_data ddr3_data = {
+	.datardsratio0 = MT41K256M16HA125E_RD_DQS,
+	.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
+	.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
+	.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+	.cmd0csratio = MT41K256M16HA125E_RATIO,
+	.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+	.cmd1csratio = MT41K256M16HA125E_RATIO,
+	.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+	.cmd2csratio = MT41K256M16HA125E_RATIO,
+	.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+	.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
+	.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
+	.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
+	.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
+	.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
+	.zq_config = MT41K256M16HA125E_ZQ_CFG,
+	.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
+};
+
+static const struct ctrl_ioregs ddr3_ioregs = {
+	.cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+	.cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+	.cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+	.dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+	.dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+};
+
+#ifdef CONFIG_SPL_OS_BOOT
+/*
+ * called from spl_nand.c
+ * return 0 for loading linux, return 1 for loading u-boot
+ */
+int spl_start_uboot(void)
+{
+	if (0 == gpio_get_value(REPSWITCH)) {
+		blink(5, 125, ETHLED_ORANGE);
+		mdelay(1000);
+		printf("SPL: entering u-boot instead kernel image.\n");
+		return 1;
+	}
+	return 0;
+}
+#endif /* CONFIG_SPL_OS_BOOT */
+
+#define OSC	(V_OSCK/1000000)
+static const struct dpll_params dpll_ddr3 = { 400, OSC-1, 1, -1, -1, -1, -1};
+
+void am33xx_spl_board_init(void)
+{
+	pmicsetup(1000);
+}
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+	return &dpll_ddr3;
+}
+
+void sdram_init(void)
+{
+	config_ddr(400, &ddr3_ioregs,
+		   &ddr3_data,
+		   &ddr3_cmd_ctrl_data,
+		   &ddr3_emif_reg_data, 0);
+}
+#endif /* CONFIG_SPL_BUILD */
+
+/* Basic board specific setup.  Pinmux has been handled already. */
+int board_init(void)
+{
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+	gpmc_init();
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	gpio_direction_output(ETHLED_ORANGE, 0);
+
+	if (0 == gpio_get_value(REPSWITCH)) {
+		printf("\n\n\n"
+		"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n"
+		"!!!!!!! recovery switch activated !!!!!!!\n"
+		"!!!!!!!     running usbupdate     !!!!!!!\n"
+		"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n\n\n");
+		setenv("bootcmd", "sleep 2; run netupdate;");
+	}
+
+	printf("turning on display power+backlight ... ");
+	tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, TPS65217_WLEDCTRL1,
+			   0x09, TPS65217_MASK_ALL_BITS);	/* 200 Hz, ON */
+	tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, TPS65217_WLEDCTRL2,
+			   0x62, TPS65217_MASK_ALL_BITS);	/* 100% */
+	printf("ok.\n");
+
+	return 0;
+}
+#endif /* CONFIG_BOARD_LATE_INIT */
diff --git a/board/BuR/tseries/mux.c b/board/BuR/tseries/mux.c
new file mode 100644
index 0000000000..3c76e96926
--- /dev/null
+++ b/board/BuR/tseries/mux.c
@@ -0,0 +1,225 @@
+/*
+ * mux.c
+ *
+ * Pinmux Setting for B&R LEIT Board(s)
+ *
+ * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at>
+ * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include <i2c.h>
+
+static struct module_pin_mux uart0_pin_mux[] = {
+	/* UART0_CTS */
+	{OFFSET(uart0_ctsn), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* UART0_RXD */
+	{OFFSET(uart0_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* UART0_TXD */
+	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},
+	{-1},
+};
+#ifdef CONFIG_MMC
+static struct module_pin_mux mmc1_pin_mux[] = {
+	{OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT3 */
+	{OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT2 */
+	{OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT1 */
+	{OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT0 */
+	{OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)},	/* MMC1_CLK */
+	{OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)},	/* MMC1_CMD */
+	{OFFSET(gpmc_csn0), (MODE(7) | RXACTIVE | PULLUP_EN)},	/* MMC1_WP */
+	{OFFSET(gpmc_advn_ale), (MODE(7) | RXACTIVE | PULLUP_EN)},/* MMC1_CD */
+	{-1},
+};
+#endif
+static struct module_pin_mux i2c0_pin_mux[] = {
+	/* I2C_DATA */
+	{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
+	/* I2C_SCLK */
+	{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
+	{-1},
+};
+
+static struct module_pin_mux spi0_pin_mux[] = {
+	/* SPI0_SCLK */
+	{OFFSET(spi0_sclk), (MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN)},
+	/* SPI0_D0 */
+	{OFFSET(spi0_d0), (MODE(0) | RXACTIVE |	PULLUDEN | PULLUP_EN)},
+	/* SPI0_D1 */
+	{OFFSET(spi0_d1), (MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN)},
+	/* SPI0_CS0 */
+	{OFFSET(spi0_cs0), (MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN)},
+	{-1},
+};
+
+static struct module_pin_mux mii1_pin_mux[] = {
+	{OFFSET(mii1_rxerr), MODE(0) | RXACTIVE},	/* MII1_RXERR */
+	{OFFSET(mii1_txen), MODE(0)},			/* MII1_TXEN */
+	{OFFSET(mii1_rxdv), MODE(0) | RXACTIVE},	/* MII1_RXDV */
+	{OFFSET(mii1_txd3), MODE(0)},			/* MII1_TXD3 */
+	{OFFSET(mii1_txd2), MODE(0)},			/* MII1_TXD2 */
+	{OFFSET(mii1_txd1), MODE(0)},			/* MII1_TXD1 */
+	{OFFSET(mii1_txd0), MODE(0)},			/* MII1_TXD0 */
+	{OFFSET(mii1_txclk), MODE(0) | RXACTIVE},	/* MII1_TXCLK */
+	{OFFSET(mii1_rxclk), MODE(0) | RXACTIVE},	/* MII1_RXCLK */
+	{OFFSET(mii1_rxd3), MODE(0) | RXACTIVE},	/* MII1_RXD3 */
+	{OFFSET(mii1_rxd2), MODE(0) | RXACTIVE},	/* MII1_RXD2 */
+	{OFFSET(mii1_rxd1), MODE(0) | RXACTIVE},	/* MII1_RXD1 */
+	{OFFSET(mii1_rxd0), MODE(0) | RXACTIVE},	/* MII1_RXD0 */
+	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
+	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},	/* MDIO_CLK */
+	{-1},
+};
+
+static struct module_pin_mux mii2_pin_mux[] = {
+	{OFFSET(gpmc_a0), MODE(1)},		/* MII2_TXEN */
+	{OFFSET(gpmc_a1), MODE(1) | RXACTIVE},	/* MII2_RXDV */
+	{OFFSET(gpmc_a2), MODE(1)},		/* MII2_TXD3 */
+	{OFFSET(gpmc_a3), MODE(1)},		/* MII2_TXD2 */
+	{OFFSET(gpmc_a4), MODE(1)},		/* MII2_TXD1 */
+	{OFFSET(gpmc_a5), MODE(1)},		/* MII2_TXD0 */
+	{OFFSET(gpmc_a6), MODE(1) | RXACTIVE},	/* MII2_TXCLK */
+	{OFFSET(gpmc_a7), MODE(1) | RXACTIVE},	/* MII2_RXCLK */
+	{OFFSET(gpmc_a8), MODE(1) | RXACTIVE},	/* MII2_RXD3 */
+	{OFFSET(gpmc_a9), MODE(1) | RXACTIVE},	/* MII2_RXD2 */
+	{OFFSET(gpmc_a10), MODE(1) | RXACTIVE},	/* MII2_RXD1 */
+	{OFFSET(gpmc_a11), MODE(1) | RXACTIVE},	/* MII2_RXD0 */
+	{OFFSET(gpmc_wpn), (MODE(1) | RXACTIVE)},/* MII2_RXERR */
+						/*
+						 * MII2_CRS is shared with
+						 * NAND_WAIT0
+						 */
+	{OFFSET(gpmc_be1n), (MODE(1) | RXACTIVE)},/* MII1_COL */
+	{-1},
+};
+#ifdef CONFIG_NAND
+static struct module_pin_mux nand_pin_mux[] = {
+	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD0 */
+	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD1 */
+	{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD2 */
+	{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD3 */
+	{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD4 */
+	{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD5 */
+	{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD6 */
+	{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD7 */
+	{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* NAND WAIT */
+	{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)},	/* NAND_WPN */
+	{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},	/* NAND_CS0 */
+	{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)},	/* NAND_ADV_ALE */
+	{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)},	/* NAND_OE */
+	{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)},	/* NAND_WEN */
+	{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)},	/* NAND_BE_CLE */
+	{-1},
+};
+#endif
+static struct module_pin_mux gpIOs[] = {
+	/* GPIO0_6  (SPI0_CS1) - 3v3_PWR_nEN (Display Power Supply) */
+	{OFFSET(spi0_cs1),  (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* TIMER5   (MMC0_DAT3) - TIMER5 (Buzzer) */
+	{OFFSET(mmc0_dat3), (MODE(3) | PULLUDEN | RXACTIVE)},
+	/* TIMER6   (MMC0_DAT2) - PWM_BACK_3V3, later used as MODE3 for PWM */
+	{OFFSET(mmc0_dat2), (MODE(7) | PULLUDEN | RXACTIVE)},
+	/* GPIO2_28 (MMC0_DAT1)	 - MII_nNAND */
+	{OFFSET(mmc0_dat1), (MODE(7) | PULLUDEN | RXACTIVE)},
+	/* GPIO2_29 (MMC0_DAT0)	 - NAND_1n0 */
+	{OFFSET(mmc0_dat0), (MODE(7) | PULLUDEN | RXACTIVE)},
+	/* GPIO2_30 (MMC0_CLK) - nRESET (PHY) */
+	{OFFSET(mmc0_clk), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* GPIO3_18 (MCASP0_ACLKR) - CPLD JTAG TDI */
+	{OFFSET(mcasp0_aclkr), (MODE(7) | PULLUDEN | PULLUP_EN  | RXACTIVE)},
+	/* GPIO3_19 (MCASP0_FSR) - CPLD JTAG TMS */
+	{OFFSET(mcasp0_fsr), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* GPIO3_20 (MCASP0_AXR1) - CPLD JTAG TCK */
+	{OFFSET(mcasp0_axr1), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* GPIO3_21 (MCASP0_AHCLKX) - CPLD JTAG TDO */
+	{OFFSET(mcasp0_ahclkx), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* GPIO2_0  (GPMC_nCS3) - DCOK */
+	{OFFSET(gpmc_csn3), (MODE(7) | PULLUDDIS | RXACTIVE) },
+	/* GPIO0_29 (RMII1_REFCLK) - eMMC nRST */
+	{OFFSET(rmii1_refclk), (MODE(7) | PULLUDDIS | RXACTIVE) },
+	/*
+	 * GPIO0_7 (PWW0 OUT)
+	 * DISPLAY_ONOFF (Backlight Enable at LVDS Versions)
+	 */
+	{OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDEN | RXACTIVE)},
+	/* GPIO0_19 (DMA_INTR0) - ISPLAY_MODE (CPLD) */
+	{OFFSET(xdma_event_intr0), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* GPIO0_20 (DMA_INTR1) - REP-Switch */
+	{OFFSET(xdma_event_intr1), (MODE(7) | PULLUP_EN | RXACTIVE)},
+	/* GPIO3_14 (MCASP0_ACLKX) - frei / PP709 */
+	{OFFSET(mcasp0_aclkx), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE) },
+	/* GPIO3_15 (MCASP0_FSX) - PMIC_nRESET */
+	{OFFSET(mcasp0_fsx),   (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE) },
+	/* GPIO3_16 (MCASP0_AXR0) - ETH1_LEDY */
+	{OFFSET(mcasp0_axr0),  (MODE(7) | PULLUDDIS) },
+	/* GPIO3_17 (MCASP0_AHCLKR) - ETH2_LEDY */
+	{OFFSET(mcasp0_ahclkr), (MODE(7) | PULLUDDIS) },
+
+	{-1},
+};
+
+static struct module_pin_mux lcd_pin_mux[] = {
+	{OFFSET(lcd_data0), (MODE(0) | PULLUDDIS)},	/* LCD-Data(0) */
+	{OFFSET(lcd_data1), (MODE(0) | PULLUDDIS)},	/* LCD-Data(1) */
+	{OFFSET(lcd_data2), (MODE(0) | PULLUDDIS)},	/* LCD-Data(2) */
+	{OFFSET(lcd_data3), (MODE(0) | PULLUDDIS)},	/* LCD-Data(3) */
+	{OFFSET(lcd_data4), (MODE(0) | PULLUDDIS)},	/* LCD-Data(4) */
+	{OFFSET(lcd_data5), (MODE(0) | PULLUDDIS)},	/* LCD-Data(5) */
+	{OFFSET(lcd_data6), (MODE(0) | PULLUDDIS)},	/* LCD-Data(6) */
+	{OFFSET(lcd_data7), (MODE(0) | PULLUDDIS)},	/* LCD-Data(7) */
+	{OFFSET(lcd_data8), (MODE(0) | PULLUDDIS)},	/* LCD-Data(8) */
+	{OFFSET(lcd_data9), (MODE(0) | PULLUDDIS)},	/* LCD-Data(9) */
+	{OFFSET(lcd_data10), (MODE(0) | PULLUDDIS)},	/* LCD-Data(10) */
+	{OFFSET(lcd_data11), (MODE(0) | PULLUDDIS)},	/* LCD-Data(11) */
+	{OFFSET(lcd_data12), (MODE(0) | PULLUDDIS)},	/* LCD-Data(12) */
+	{OFFSET(lcd_data13), (MODE(0) | PULLUDDIS)},	/* LCD-Data(13) */
+	{OFFSET(lcd_data14), (MODE(0) | PULLUDDIS)},	/* LCD-Data(14) */
+	{OFFSET(lcd_data15), (MODE(0) | PULLUDDIS)},	/* LCD-Data(15) */
+
+	{OFFSET(gpmc_ad8), (MODE(1) | PULLUDDIS)},	/* LCD-Data(16) */
+	{OFFSET(gpmc_ad9), (MODE(1) | PULLUDDIS)},	/* LCD-Data(17) */
+	{OFFSET(gpmc_ad10), (MODE(1) | PULLUDDIS)},	/* LCD-Data(18) */
+	{OFFSET(gpmc_ad11), (MODE(1) | PULLUDDIS)},	/* LCD-Data(19) */
+	{OFFSET(gpmc_ad12), (MODE(1) | PULLUDDIS)},	/* LCD-Data(20) */
+	{OFFSET(gpmc_ad13), (MODE(1) | PULLUDDIS)},	/* LCD-Data(21) */
+	{OFFSET(gpmc_ad14), (MODE(1) | PULLUDDIS)},	/* LCD-Data(22) */
+	{OFFSET(gpmc_ad15), (MODE(1) | PULLUDDIS)},	/* LCD-Data(23) */
+
+	{OFFSET(lcd_vsync), (MODE(0) | PULLUDDIS)},	/* LCD-VSync */
+	{OFFSET(lcd_hsync), (MODE(0) | PULLUDDIS)},	/* LCD-HSync */
+	{OFFSET(lcd_ac_bias_en), (MODE(0) | PULLUDDIS)},/* LCD-DE */
+	{OFFSET(lcd_pclk), (MODE(0) | PULLUDDIS)},	/* LCD-CLK */
+
+	{-1},
+};
+
+void enable_uart0_pin_mux(void)
+{
+	configure_module_pin_mux(uart0_pin_mux);
+}
+
+void enable_i2c0_pin_mux(void)
+{
+	configure_module_pin_mux(i2c0_pin_mux);
+}
+
+void enable_board_pin_mux(void)
+{
+	configure_module_pin_mux(i2c0_pin_mux);
+	configure_module_pin_mux(mii1_pin_mux);
+	configure_module_pin_mux(mii2_pin_mux);
+#ifdef CONFIG_NAND
+	configure_module_pin_mux(nand_pin_mux);
+#elif defined(CONFIG_MMC)
+	configure_module_pin_mux(mmc1_pin_mux);
+#endif
+	configure_module_pin_mux(spi0_pin_mux);
+	configure_module_pin_mux(lcd_pin_mux);
+	configure_module_pin_mux(gpIOs);
+}
diff --git a/board/ait/cam_enc_4xx/u-boot-spl.lds b/board/ait/cam_enc_4xx/u-boot-spl.lds
index fdfbfc38a9..c0d09adf7c 100644
--- a/board/ait/cam_enc_4xx/u-boot-spl.lds
+++ b/board/ait/cam_enc_4xx/u-boot-spl.lds
@@ -48,5 +48,9 @@ SECTIONS
 	} >.sram
 
 	__image_copy_end = .;
-	_end = .;
+
+	.end :
+	{
+		*(.__end)
+	}
 }
diff --git a/board/armltd/integrator/lowlevel_init.S b/board/armltd/integrator/lowlevel_init.S
index 389d5e9083..0fb42adc6f 100644
--- a/board/armltd/integrator/lowlevel_init.S
+++ b/board/armltd/integrator/lowlevel_init.S
@@ -183,7 +183,7 @@ cm_remap:
 
 	/* Now 0x00000000 is writeable, replace the vectors	*/
 	ldr	r0, =_start	/* r0 <- start of vectors	*/
-	ldr	r2, =_TEXT_BASE	/* r2 <- past vectors	*/
+	add	r2, r0, #64	/* r2 <- past vectors	*/
 	sub	r1,r1,r1		/* destination 0x00000000	*/
 
 copy_vec:
diff --git a/board/broadcom/bcm28155_ap/Makefile b/board/broadcom/bcm28155_ap/Makefile
new file mode 100644
index 0000000000..b18785a078
--- /dev/null
+++ b/board/broadcom/bcm28155_ap/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright 2013 Broadcom Corporation.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= $(BOARD).o
diff --git a/board/broadcom/bcm28155_ap/bcm28155_ap.c b/board/broadcom/bcm28155_ap/bcm28155_ap.c
new file mode 100644
index 0000000000..940a1c2c50
--- /dev/null
+++ b/board/broadcom/bcm28155_ap/bcm28155_ap.c
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <mmc.h>
+#include <asm/kona-common/kona_sdhci.h>
+#include <asm/kona-common/clk.h>
+#include <asm/arch/sysmap.h>
+
+#define SECWATCHDOG_SDOGCR_OFFSET	0x00000000
+#define SECWATCHDOG_SDOGCR_EN_SHIFT	27
+#define SECWATCHDOG_SDOGCR_SRSTEN_SHIFT	26
+#define SECWATCHDOG_SDOGCR_CLKS_SHIFT	20
+#define SECWATCHDOG_SDOGCR_LD_SHIFT	0
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * board_init - early hardware init
+ */
+int board_init(void)
+{
+	printf("Relocation Offset is: %08lx\n", gd->reloc_off);
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	clk_init();
+
+	return 0;
+}
+
+/*
+ * misc_init_r - miscellaneous platform dependent initializations
+ */
+int misc_init_r(void)
+{
+	/* Disable watchdog reset - watchdog unused */
+	writel((0 << SECWATCHDOG_SDOGCR_EN_SHIFT) |
+	       (0 << SECWATCHDOG_SDOGCR_SRSTEN_SHIFT) |
+	       (4 << SECWATCHDOG_SDOGCR_CLKS_SHIFT) |
+	       (0x5a0 << SECWATCHDOG_SDOGCR_LD_SHIFT),
+	       (SECWD_BASE_ADDR + SECWATCHDOG_SDOGCR_OFFSET));
+
+	return 0;
+}
+
+/*
+ * dram_init - sets uboots idea of sdram size
+ */
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+				    CONFIG_SYS_SDRAM_SIZE);
+	return 0;
+}
+
+/* This is called after dram_init() so use get_ram_size result */
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+}
+
+#ifdef CONFIG_KONA_SDHCI
+/*
+ * mmc_init - Initializes mmc
+ */
+int board_mmc_init(bd_t *bis)
+{
+	int ret = 0;
+
+	/* Register eMMC - SDIO2 */
+	ret = kona_sdhci_init(1, 400000, 0);
+	if (ret)
+		return ret;
+
+	/* Register SD Card - SDIO4 kona_mmc_init assumes 0 based index */
+	ret = kona_sdhci_init(3, 400000, 0);
+	return ret;
+}
+#endif
diff --git a/board/cm4008/flash.c b/board/cm4008/flash.c
index 251192839e..8315a57ed9 100644
--- a/board/cm4008/flash.c
+++ b/board/cm4008/flash.c
@@ -57,7 +57,7 @@ unsigned long flash_init (void)
 	 */
 	flash_protect (FLAG_PROTECT_SET,
 		       CONFIG_SYS_FLASH_BASE,
-		       CONFIG_SYS_FLASH_BASE + _bss_start_ofs,
+		       CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start),
 		       &flash_info[0]);
 
 	return size;
diff --git a/board/cm41xx/flash.c b/board/cm41xx/flash.c
index 251192839e..8315a57ed9 100644
--- a/board/cm41xx/flash.c
+++ b/board/cm41xx/flash.c
@@ -57,7 +57,7 @@ unsigned long flash_init (void)
 	 */
 	flash_protect (FLAG_PROTECT_SET,
 		       CONFIG_SYS_FLASH_BASE,
-		       CONFIG_SYS_FLASH_BASE + _bss_start_ofs,
+		       CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start),
 		       &flash_info[0]);
 
 	return size;
diff --git a/board/compulab/cm_t335/u-boot.lds b/board/compulab/cm_t335/u-boot.lds
index 1b609a249a..0984dfe6ea 100644
--- a/board/compulab/cm_t335/u-boot.lds
+++ b/board/compulab/cm_t335/u-boot.lds
@@ -61,7 +61,12 @@ SECTIONS
 		*(.__rel_dyn_end)
 	}
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
 
 	/*
 	 * Deprecated: this MMU section is used by pxa at present but
@@ -92,10 +97,14 @@ SECTIONS
 		KEEP(*(.__bss_end));
 	}
 
-	/DISCARD/ : { *(.dynsym) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
+	.dynsym _image_binary_end : { *(.dynsym) }
+	.hash : { *(.hash) }
+	.got.plt : { *(.got.plt) }
+	.dynbss : { *(.dynbss) }
+	.dynstr : { *(.dynstr*) }
+	.dynamic : { *(.dynamic*) }
+	.plt : { *(.plt*) }
+	.interp : { *(.interp*) }
+	.gnu : { *(.gnu*) }
+	.ARM.exidx : { *(.ARM.exidx*) }
 }
diff --git a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds
index 5480d1f276..de21a132b0 100644
--- a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds
+++ b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds
@@ -49,5 +49,9 @@ SECTIONS
 	} >.sram
 
 	__image_copy_end = .;
-	_end = .;
+
+	.end :
+	{
+		*(.__end)
+	}
 }
diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds
index d49c314490..299226b95f 100644
--- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds
+++ b/board/davinci/da8xxevm/u-boot-spl-hawk.lds
@@ -61,5 +61,8 @@ SECTIONS
 		__bss_end = .;
 	}
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
 }
diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds
index 1cca176c38..6da1d4b5f5 100644
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@ -69,7 +69,12 @@ SECTIONS
 		*(.__rel_dyn_end)
 	}
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
 
 /*
  * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
@@ -90,7 +95,7 @@ SECTIONS
 		KEEP(*(.__bss_end));
 	}
 
-	.dynsym _end : { *(.dynsym) }
+	.dynsym _image_binary_end : { *(.dynsym) }
 	.dynbss : { *(.dynbss) }
 	.dynstr : { *(.dynstr*) }
 	.dynamic : { *(.dynamic*) }
diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h
index 703dbeccfd..17c122cf50 100644
--- a/board/htkw/mcx/mcx.h
+++ b/board/htkw/mcx/mcx.h
@@ -325,8 +325,6 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | EN  | M4)) \
 	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) \
 	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTD | EN  | M4)) \
-	MUX_VAL(CP(SYS_NRESWARM),	(IEN | PTU | DIS | M4)) \
-					/* SYS_nRESWARM */\
 	MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) \
 	MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) \
 	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) \
diff --git a/board/mpl/vcma9/lowlevel_init.S b/board/mpl/vcma9/lowlevel_init.S
index b889cf94af..cca9c0c880 100644
--- a/board/mpl/vcma9/lowlevel_init.S
+++ b/board/mpl/vcma9/lowlevel_init.S
@@ -197,13 +197,10 @@
 #define REFCNT_266		0
 /**************************************/
 
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
 .globl lowlevel_init
 lowlevel_init:
 	/* use r0 to relocate DATA read/write to flash rather than memory ! */
-	ldr	r0, _TEXT_BASE
+	ldr	r0, =CONFIG_SYS_TEXT_BASE
 	ldr	r13, =BWSCON
 
 	/* enable minimal access to PLD */
diff --git a/board/samsung/common/exynos-uboot-spl.lds b/board/samsung/common/exynos-uboot-spl.lds
index 8e3b73ecf7..b22f9e07bb 100644
--- a/board/samsung/common/exynos-uboot-spl.lds
+++ b/board/samsung/common/exynos-uboot-spl.lds
@@ -42,7 +42,11 @@ SECTIONS
 	. = ALIGN(4);
 
 	__image_copy_end = .;
-	_end = .;
+
+	.end :
+	{
+		*(.__end)
+	} >.sram
 
 	.bss :
 	{
diff --git a/board/samsung/goni/lowlevel_init.S b/board/samsung/goni/lowlevel_init.S
index 726211a336..d52bc09f8d 100644
--- a/board/samsung/goni/lowlevel_init.S
+++ b/board/samsung/goni/lowlevel_init.S
@@ -22,9 +22,6 @@
  * r9 has Mobile DDR size, 1 means 1GiB, 2 means 2GiB and so on
  */
 
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
 	.globl lowlevel_init
 lowlevel_init:
 	mov	r11, lr
diff --git a/board/samsung/smdk2410/lowlevel_init.S b/board/samsung/smdk2410/lowlevel_init.S
index c7b78fd103..5de04f10e9 100644
--- a/board/samsung/smdk2410/lowlevel_init.S
+++ b/board/samsung/smdk2410/lowlevel_init.S
@@ -110,16 +110,13 @@
 #define REFCNT			1113	/* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
 /**************************************/
 
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
 .globl lowlevel_init
 lowlevel_init:
 	/* memory control configuration */
 	/* make r0 relative the current location so that it */
 	/* reads SMRDATA out of FLASH rather than memory ! */
 	ldr     r0, =SMRDATA
-	ldr	r1, _TEXT_BASE
+	ldr	r1, =CONFIG_SYS_TEXT_BASE
 	sub	r0, r0, r1
 	ldr	r1, =BWSCON	/* Bus Width Status Controller */
 	add     r2, r0, #13*4
diff --git a/board/samsung/smdkc100/lowlevel_init.S b/board/samsung/smdkc100/lowlevel_init.S
index 4df0974af5..65e6b7a73a 100644
--- a/board/samsung/smdkc100/lowlevel_init.S
+++ b/board/samsung/smdkc100/lowlevel_init.S
@@ -17,9 +17,6 @@
  * r5 has zero always
  */
 
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
 	.globl lowlevel_init
 lowlevel_init:
 	mov	r9, lr
diff --git a/board/silica/pengwyn/Makefile b/board/silica/pengwyn/Makefile
new file mode 100644
index 0000000000..c8b4f9a280
--- /dev/null
+++ b/board/silica/pengwyn/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile
+#
+# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_NOR_BOOT),y)
+obj-y	:= mux.o
+endif
+
+obj-y	+= board.o
diff --git a/board/silica/pengwyn/board.c b/board/silica/pengwyn/board.c
new file mode 100644
index 0000000000..a553129d29
--- /dev/null
+++ b/board/silica/pengwyn/board.c
@@ -0,0 +1,207 @@
+/*
+ * board.c
+ *
+ * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <i2c.h>
+#include <phy.h>
+#include <cpsw.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+#if defined(CONFIG_SPL_BUILD)
+
+/* DDR3 RAM timings */
+static const struct ddr_data ddr3_data = {
+	.datardsratio0 = MT41K128MJT187E_RD_DQS,
+	.datawdsratio0 = MT41K128MJT187E_WR_DQS,
+	.datafwsratio0 = MT41K128MJT187E_PHY_FIFO_WE,
+	.datawrsratio0 = MT41K128MJT187E_PHY_WR_DATA,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+	.cmd0csratio = MT41K128MJT187E_RATIO,
+	.cmd0iclkout = MT41K128MJT187E_INVERT_CLKOUT,
+	.cmd1csratio = MT41K128MJT187E_RATIO,
+	.cmd1iclkout = MT41K128MJT187E_INVERT_CLKOUT,
+	.cmd2csratio = MT41K128MJT187E_RATIO,
+	.cmd2iclkout = MT41K128MJT187E_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+	.sdram_config = MT41K128MJT187E_EMIF_SDCFG,
+	.ref_ctrl = MT41K128MJT187E_EMIF_SDREF,
+	.sdram_tim1 = MT41K128MJT187E_EMIF_TIM1,
+	.sdram_tim2 = MT41K128MJT187E_EMIF_TIM2,
+	.sdram_tim3 = MT41K128MJT187E_EMIF_TIM3,
+	.zq_config = MT41K128MJT187E_ZQ_CFG,
+	.emif_ddr_phy_ctlr_1 = MT41K128MJT187E_EMIF_READ_LATENCY |
+				PHY_EN_DYN_PWRDN,
+};
+
+const struct ctrl_ioregs ddr3_ioregs = {
+	.cm0ioctl		= MT41K128MJT187E_IOCTRL_VALUE,
+	.cm1ioctl		= MT41K128MJT187E_IOCTRL_VALUE,
+	.cm2ioctl		= MT41K128MJT187E_IOCTRL_VALUE,
+	.dt0ioctl		= MT41K128MJT187E_IOCTRL_VALUE,
+	.dt1ioctl		= MT41K128MJT187E_IOCTRL_VALUE,
+};
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+	/* break into full u-boot on 'c' */
+	return serial_tstc() && serial_getc() == 'c';
+}
+#endif
+
+#define OSC	(V_OSCK/1000000)
+const struct dpll_params dpll_ddr_266 = {
+		266, OSC-1, 1, -1, -1, -1, -1};
+const struct dpll_params dpll_ddr_303 = {
+		303, OSC-1, 1, -1, -1, -1, -1};
+const struct dpll_params dpll_ddr_400 = {
+		400, OSC-1, 1, -1, -1, -1, -1};
+
+void am33xx_spl_board_init(void)
+{
+	/*
+	 * The pengwyn board uses the TPS650250 PMIC  without I2C
+	 * interface and will output the following fixed voltages:
+	 * DCDC1=3V3 (IO) DCDC2=1V5 (DDR) DCDC3=1V26 (Vmpu)
+	 * VLDO1=1V8 (IO) VLDO2=1V8(IO)
+	 * Vcore=1V1 is fixed, generated by TPS62231
+	 */
+
+	/* Get the frequency */
+	dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
+
+	/* Set CORE Frequencies to OPP100 */
+	do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
+
+	/* 720MHz cpu, this might change on newer board revisions */
+	dpll_mpu_opp100.m = MPUPLL_M_720;
+	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
+}
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+	/* future configs can return other clock settings */
+	return &dpll_ddr_303;
+}
+
+void set_uart_mux_conf(void)
+{
+	enable_uart0_pin_mux();
+}
+
+void set_mux_conf_regs(void)
+{
+	enable_board_pin_mux();
+}
+
+void sdram_init(void)
+{
+	config_ddr(303, &ddr3_ioregs, &ddr3_data,
+		   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+}
+#endif /* if CONFIG_SPL_BUILD */
+
+/*
+ * Basic board specific setup.  Pinmux has been handled already.
+ */
+int board_init(void)
+{
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+	gpmc_init();
+	return 0;
+}
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+static void cpsw_control(int enabled)
+{
+	/* VTP can be added here */
+	return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+	{
+		.slave_reg_ofs	= 0x208,
+		.sliver_reg_ofs	= 0xd80,
+		.phy_id		= 0,
+		.phy_if		= PHY_INTERFACE_MODE_MII,
+	},
+	{
+		.slave_reg_ofs	= 0x308,
+		.sliver_reg_ofs	= 0xdc0,
+		.phy_id		= 1,
+		.phy_if		= PHY_INTERFACE_MODE_MII,
+	},
+};
+
+static struct cpsw_platform_data cpsw_data = {
+	.mdio_base		= CPSW_MDIO_BASE,
+	.cpsw_base		= CPSW_BASE,
+	.mdio_div		= 0xff,
+	.channels		= 8,
+	.cpdma_reg_ofs		= 0x800,
+	.slaves			= 1,
+	.slave_data		= cpsw_slaves,
+	.ale_reg_ofs		= 0xd00,
+	.ale_entries		= 1024,
+	.host_port_reg_ofs	= 0x108,
+	.hw_stats_reg_ofs	= 0x900,
+	.bd_ram_ofs		= 0x2000,
+	.mac_control		= (1 << 5),
+	.control		= cpsw_control,
+	.host_port_num		= 0,
+	.version		= CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+	int rv, n = 0;
+	uint8_t mac_addr[6];
+	uint32_t mac_hi, mac_lo;
+
+	if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+		printf("<ethaddr> not set. Reading from E-fuse\n");
+		/* try reading mac address from efuse */
+		mac_lo = readl(&cdev->macid0l);
+		mac_hi = readl(&cdev->macid0h);
+		mac_addr[0] = mac_hi & 0xFF;
+		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+		mac_addr[4] = mac_lo & 0xFF;
+		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+
+		if (is_valid_ether_addr(mac_addr))
+			eth_setenv_enetaddr("ethaddr", mac_addr);
+		else
+			return n;
+	}
+
+	writel(MII_MODE_ENABLE, &cdev->miisel);
+
+	rv = cpsw_register(&cpsw_data);
+	if (rv < 0)
+		printf("Error %d registering CPSW switch\n", rv);
+	else
+		n += rv;
+	return n;
+}
+#endif /* if CONFIG_DRIVER_TI_CPSW */
diff --git a/board/silica/pengwyn/board.h b/board/silica/pengwyn/board.h
new file mode 100644
index 0000000000..05addf6bb2
--- /dev/null
+++ b/board/silica/pengwyn/board.h
@@ -0,0 +1,15 @@
+/*
+ * board.h
+ *
+ * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+void enable_uart0_pin_mux(void);
+void enable_board_pin_mux(void);
+
+#endif
diff --git a/board/silica/pengwyn/mux.c b/board/silica/pengwyn/mux.c
new file mode 100644
index 0000000000..c8be440a20
--- /dev/null
+++ b/board/silica/pengwyn/mux.c
@@ -0,0 +1,98 @@
+/*
+ * mux.c
+ *
+ * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include "board.h"
+
+/* UART0 pins E15(rx),E16(tx) [E17(rts),E18(cts)] */
+static struct module_pin_mux uart0_pin_mux[] = {
+	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART0_RXD */
+	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},		/* UART0_TXD */
+	{-1},
+};
+
+/* unused: UART1 pins D15(tx),D16(rx),D17(cts),D18(rts) */
+
+/* I2C pins C16(scl)/C17(sda) */
+static struct module_pin_mux i2c0_pin_mux[] = {
+	{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
+					PULLUDEN | SLEWCTRL)}, /* I2C0_DATA */
+	{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
+					PULLUDEN | SLEWCTRL)}, /* I2C0_SCLK */
+	{-1},
+};
+
+/* MMC0 pins */
+static struct module_pin_mux mmc0_pin_mux[] = {
+	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
+	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
+	{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
+	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
+	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_CLK */
+	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_CMD */
+	{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)},  /* MMC0_CD */
+	{-1},
+};
+
+/* MII pins */
+static struct module_pin_mux mii1_pin_mux[] = {
+	{OFFSET(mii1_rxerr), MODE(0) | RXACTIVE},	/* MII1_RXERR */
+	{OFFSET(mii1_txen), MODE(0)},			/* MII1_TXEN */
+	{OFFSET(mii1_rxdv), MODE(0) | RXACTIVE},	/* MII1_RXDV */
+	{OFFSET(mii1_txd3), MODE(0)},			/* MII1_TXD3 */
+	{OFFSET(mii1_txd2), MODE(0)},			/* MII1_TXD2 */
+	{OFFSET(mii1_txd1), MODE(0)},			/* MII1_TXD1 */
+	{OFFSET(mii1_txd0), MODE(0)},			/* MII1_TXD0 */
+	{OFFSET(mii1_txclk), MODE(0) | RXACTIVE},	/* MII1_TXCLK */
+	{OFFSET(mii1_rxclk), MODE(0) | RXACTIVE},	/* MII1_RXCLK */
+	{OFFSET(mii1_rxd3), MODE(0) | RXACTIVE},	/* MII1_RXD3 */
+	{OFFSET(mii1_rxd2), MODE(0) | RXACTIVE},	/* MII1_RXD2 */
+	{OFFSET(mii1_rxd1), MODE(0) | RXACTIVE},	/* MII1_RXD1 */
+	{OFFSET(mii1_rxd0), MODE(0) | RXACTIVE},	/* MII1_RXD0 */
+	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
+	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},	/* MDIO_CLK */
+	{-1},
+};
+
+/* NAND pins */
+static struct module_pin_mux nand_pin_mux[] = {
+	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD0 */
+	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD1 */
+	{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD2 */
+	{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD3 */
+	{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD4 */
+	{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD5 */
+	{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD6 */
+	{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD7 */
+	{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
+	{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)},	/* NAND_WPN */
+	{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},	/* NAND_CS0 */
+	{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
+	{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)},	/* NAND_OE */
+	{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)},	/* NAND_WEN */
+	{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)},	/* NAND_BE_CLE */
+	{-1},
+};
+
+void enable_uart0_pin_mux(void)
+{
+	configure_module_pin_mux(uart0_pin_mux);
+}
+
+void enable_board_pin_mux()
+{
+	configure_module_pin_mux(i2c0_pin_mux);
+	configure_module_pin_mux(uart0_pin_mux);
+	configure_module_pin_mux(mii1_pin_mux);
+	configure_module_pin_mux(mmc0_pin_mux);
+	configure_module_pin_mux(nand_pin_mux);
+}
diff --git a/board/ti/am335x/u-boot.lds b/board/ti/am335x/u-boot.lds
index 6a734b30ac..ceb20226ff 100644
--- a/board/ti/am335x/u-boot.lds
+++ b/board/ti/am335x/u-boot.lds
@@ -77,7 +77,12 @@ SECTIONS
 		*(.__rel_dyn_end)
 	}
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
 
 	/*
 	 * Deprecated: this MMU section is used by pxa at present but
@@ -108,7 +113,7 @@ SECTIONS
 		KEEP(*(.__bss_end));
 	}
 
-	.dynsym _end : { *(.dynsym) }
+	.dynsym _image_binary_end : { *(.dynsym) }
 	.dynbss : { *(.dynbss) }
 	.dynstr : { *(.dynstr*) }
 	.dynamic : { *(.dynamic*) }
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index 4e6846a50a..95fd13751b 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -346,14 +346,14 @@ static void enable_vtt_regulator(void)
 	u32 temp;
 
 	/* enable module */
-	writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO0_BASE + OMAP_GPIO_CTRL);
-
-	/* enable output for GPIO0_22 */
-	writel(GPIO_SETDATAOUT(GPIO_22),
-	       AM33XX_GPIO0_BASE + OMAP_GPIO_SETDATAOUT);
-	temp = readl(AM33XX_GPIO0_BASE + OMAP_GPIO_OE);
-	temp = temp & ~(GPIO_OE_ENABLE(GPIO_22));
-	writel(temp, AM33XX_GPIO0_BASE + OMAP_GPIO_OE);
+	writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO5_BASE + OMAP_GPIO_CTRL);
+
+	/* enable output for GPIO5_7 */
+	writel(GPIO_SETDATAOUT(7),
+	       AM33XX_GPIO5_BASE + OMAP_GPIO_SETDATAOUT);
+	temp = readl(AM33XX_GPIO5_BASE + OMAP_GPIO_OE);
+	temp = temp & ~(GPIO_OE_ENABLE(7));
+	writel(temp, AM33XX_GPIO5_BASE + OMAP_GPIO_OE);
 }
 
 void sdram_init(void)
diff --git a/board/ti/am43xx/mux.c b/board/ti/am43xx/mux.c
index f96c56f886..c330a81c4a 100644
--- a/board/ti/am43xx/mux.c
+++ b/board/ti/am43xx/mux.c
@@ -33,8 +33,8 @@ static struct module_pin_mux i2c0_pin_mux[] = {
 	{-1},
 };
 
-static struct module_pin_mux gpio0_22_pin_mux[] = {
-	{OFFSET(ddr_ba2), (MODE(9) | PULLUP_EN)},	/* GPIO0_22 */
+static struct module_pin_mux gpio5_7_pin_mux[] = {
+	{OFFSET(spi0_cs0), (MODE(7) | PULLUP_EN)},	/* GPIO5_7 */
 	{-1},
 };
 
@@ -59,7 +59,7 @@ void enable_board_pin_mux(void)
 	configure_module_pin_mux(i2c0_pin_mux);
 
 	if (board_is_gpevm())
-		configure_module_pin_mux(gpio0_22_pin_mux);
+		configure_module_pin_mux(gpio5_7_pin_mux);
 	configure_module_pin_mux(qspi_pin_mux);
 }
 
diff --git a/board/ti/omap5912osk/lowlevel_init.S b/board/ti/omap5912osk/lowlevel_init.S
index cad0a5acd8..e05a1c7b55 100644
--- a/board/ti/omap5912osk/lowlevel_init.S
+++ b/board/ti/omap5912osk/lowlevel_init.S
@@ -18,10 +18,6 @@
 #include <./configs/omap1510.h>
 #endif
 
-
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE	/* sdram load addr from config.mk */
-
 .globl lowlevel_init
 lowlevel_init:
 
diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds
index b6fdde4d1b..5dbf94e44e 100644
--- a/board/vpac270/u-boot-spl.lds
+++ b/board/vpac270/u-boot-spl.lds
@@ -54,7 +54,12 @@ SECTIONS
 
 	. = ALIGN(0x800);
 
-	_end = .;
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
 
 	.bss __rel_dyn_start (OVERLAY) : {
 		__bss_start = .;
@@ -63,7 +68,7 @@ SECTIONS
 		__bss_end = .;
 	}
 
-	.dynsym _end : { *(.dynsym) }
+	.dynsym _image_binary_end : { *(.dynsym) }
 	.dynbss : { *(.dynbss) }
 	.dynstr : { *(.dynstr*) }
 	.dynamic : { *(.dynamic*) }
diff --git a/boards.cfg b/boards.cfg
index a0dda1b241..d28e09b347 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -259,6 +259,11 @@ Active  arm         armv7          am33xx      phytec          pcm051
 Active  arm         armv7          am33xx      siemens         dxr2                dxr2                                 -                                                                                                                                 Roger Meier <r.meier@siemens.com>
 Active  arm         armv7          am33xx      siemens         pxm2                pxm2                                 -                                                                                                                                 Roger Meier <r.meier@siemens.com>
 Active  arm         armv7          am33xx      siemens         rut                 rut                                  -                                                                                                                                 Roger Meier <r.meier@siemens.com>
+Active  arm         armv7          am33xx      silica          pengwyn             pengwyn                              -                                                                                                                                 Lothar Felten <lothar.felten@gmail.com>
+Active  arm         armv7          am33xx      BuR             tseries             tseries_nand                         tseries:SERIAL1,CONS_INDEX=1,NAND                                                                                             Hannes Petermaier <hannes.petermaier@br-automation.com>
+Active  arm         armv7          am33xx      BuR             tseries             tseries_mmc                          tseries:SERIAL1,CONS_INDEX=1,EMMC_BOOT                                                                                        Hannes Petermaier <hannes.petermaier@br-automation.com>
+Active  arm         armv7          am33xx      BuR             tseries             tseries_spi                          tseries:SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT                                                                               Hannes Petermaier <hannes.petermaier@br-automation.com>
+Active  arm         armv7          am33xx      BuR             kwb                 kwb                                  kwb:SERIAL1,CONS_INDEX=1                                                                                                          Hannes Petermaier <hannes.petermaier@br-automation.com>
 Active  arm         armv7          am33xx      ti              am335x              am335x_boneblack                     am335x_evm:SERIAL1,CONS_INDEX=1,EMMC_BOOT                                                                                         Tom Rini <trini@ti.com>
 Active  arm         armv7          am33xx      ti              am335x              am335x_evm                           am335x_evm:SERIAL1,CONS_INDEX=1,NAND                                                                                              Tom Rini <trini@ti.com>
 Active  arm         armv7          am33xx      ti              am335x              am335x_evm_nor                       am335x_evm:SERIAL1,CONS_INDEX=1,NAND,NOR                                                                                          Tom Rini <trini@ti.com>
@@ -276,6 +281,7 @@ Active  arm         armv7          am33xx      ti              ti816x
 Active  arm         armv7          at91        atmel           sama5d3xek          sama5d3xek_mmc                       sama5d3xek:SAMA5D3,SYS_USE_MMC                                                                                                    Bo Shen <voice.shen@atmel.com>
 Active  arm         armv7          at91        atmel           sama5d3xek          sama5d3xek_nandflash                 sama5d3xek:SAMA5D3,SYS_USE_NANDFLASH                                                                                              Bo Shen <voice.shen@atmel.com>
 Active  arm         armv7          at91        atmel           sama5d3xek          sama5d3xek_spiflash                  sama5d3xek:SAMA5D3,SYS_USE_SERIALFLASH                                                                                            Bo Shen <voice.shen@atmel.com>
+Active  arm         armv7          bcm281xx    broadcom        bcm28155_ap         bcm28155_ap                          bcm28155_ap                                                                                                                       Tim Kryger <tim.kryger@linaro.org>
 Active  arm         armv7          exynos      samsung         arndale             arndale                              -                                                                                                                                 Inderpal Singh <inderpal.singh@linaro.org>
 Active  arm         armv7          exynos      samsung         origen              origen                               -                                                                                                                                 Chander Kashyap <k.chander@samsung.com>
 Active  arm         armv7          exynos      samsung         smdk5250            smdk5250                             -                                                                                                                                 Chander Kashyap <k.chander@samsung.com>
diff --git a/common/Makefile b/common/Makefile
index 6652ad41f8..ca9af13ce7 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -238,5 +238,3 @@ obj-y += memsize.o
 obj-y += stdio.o
 
 CFLAGS_env_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null)
-CFLAGS_hush.o := $(PLATFORM_NO_UNALIGNED)
-CFLAGS_fdt_support.o := $(PLATFORM_NO_UNALIGNED)
diff --git a/common/board_f.c b/common/board_f.c
index a973b95334..e591a0e86e 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -149,13 +149,9 @@ static int display_text_info(void)
 #ifndef CONFIG_SANDBOX
 	ulong bss_start, bss_end;
 
-#ifdef CONFIG_SYS_SYM_OFFSETS
-	bss_start = _bss_start_ofs + _TEXT_BASE;
-	bss_end = _bss_end_ofs + _TEXT_BASE;
-#else
 	bss_start = (ulong)&__bss_start;
 	bss_end = (ulong)&__bss_end;
-#endif
+
 	debug("U-Boot code: %08X -> %08lX  BSS: -> %08lX\n",
 	      CONFIG_SYS_TEXT_BASE, bss_start, bss_end);
 #endif
@@ -268,8 +264,8 @@ static int zero_global_data(void)
 
 static int setup_mon_len(void)
 {
-#ifdef CONFIG_SYS_SYM_OFFSETS
-	gd->mon_len = _bss_end_ofs;
+#ifdef __ARM__
+	gd->mon_len = (ulong)&__bss_end - (ulong)_start;
 #elif defined(CONFIG_SANDBOX)
 	gd->mon_len = (ulong)&_end - (ulong)_init;
 #else
@@ -352,11 +348,7 @@ static int setup_fdt(void)
 	gd->fdt_blob = __dtb_dt_begin;
 #elif defined CONFIG_OF_SEPARATE
 	/* FDT is at end of image */
-# ifdef CONFIG_SYS_SYM_OFFSETS
-	gd->fdt_blob = (void *)(_end_ofs + CONFIG_SYS_TEXT_BASE);
-# else
 	gd->fdt_blob = (ulong *)&_end;
-# endif
 #elif defined(CONFIG_OF_HOSTFILE)
 	if (read_fdt_from_file()) {
 		puts("Failed to read control FDT\n");
diff --git a/common/board_r.c b/common/board_r.c
index c2d0763b57..899f377e17 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -128,8 +128,8 @@ __weak int fixup_cpu(void)
 
 static int initr_reloc_global_data(void)
 {
-#ifdef CONFIG_SYS_SYM_OFFSETS
-	monitor_flash_len = _end_ofs;
+#ifdef __ARM__
+	monitor_flash_len = _end - __image_copy_start;
 #elif !defined(CONFIG_SANDBOX)
 	monitor_flash_len = (ulong)&__init_end - gd->relocaddr;
 #endif
diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c
index 6aabd1357c..348332874b 100644
--- a/common/cmd_pxe.c
+++ b/common/cmd_pxe.c
@@ -45,6 +45,7 @@ static char *from_env(const char *envvar)
 	return ret;
 }
 
+#ifdef CONFIG_CMD_NET
 /*
  * Convert an ethaddr from the environment to the format used by pxelinux
  * filenames based on mac addresses. Convert's ':' to '-', and adds "01-" to
@@ -75,6 +76,7 @@ static int format_mac_pxe(char *outbuf, size_t outbuf_len)
 
 	return 1;
 }
+#endif
 
 /*
  * Returns the directory the file specified in the bootfile env variable is
@@ -120,6 +122,7 @@ static int get_bootfile_path(const char *file_path, char *bootfile_path,
 
 static int (*do_getfile)(cmd_tbl_t *cmdtp, const char *file_path, char *file_addr);
 
+#ifdef CONFIG_CMD_NET
 static int do_get_tftp(cmd_tbl_t *cmdtp, const char *file_path, char *file_addr)
 {
 	char *tftp_argv[] = {"tftp", NULL, NULL, NULL};
@@ -132,6 +135,7 @@ static int do_get_tftp(cmd_tbl_t *cmdtp, const char *file_path, char *file_addr)
 
 	return 1;
 }
+#endif
 
 static char *fs_argv[5];
 
@@ -249,6 +253,8 @@ static int get_pxe_file(cmd_tbl_t *cmdtp, const char *file_path, void *file_addr
 	return 1;
 }
 
+#ifdef CONFIG_CMD_NET
+
 #define PXELINUX_DIR "pxelinux.cfg/"
 
 /*
@@ -397,6 +403,7 @@ do_pxe_get(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	return 1;
 }
+#endif
 
 /*
  * Wrapper to make it easier to store the file at file_path in the location
@@ -647,6 +654,7 @@ static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label)
 		len += strlen(ip_str);
 	}
 
+#ifdef CONFIG_CMD_NET
 	if (label->ipappend & 0x2) {
 		int err;
 		strcpy(mac_str, " BOOTIF=");
@@ -655,6 +663,7 @@ static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label)
 			mac_str[0] = '\0';
 		len += strlen(mac_str);
 	}
+#endif
 
 	if (label->append)
 		len += strlen(label->append);
@@ -1503,6 +1512,7 @@ static void handle_pxe_menu(cmd_tbl_t *cmdtp, struct pxe_menu *cfg)
 	boot_unattempted_labels(cmdtp, cfg);
 }
 
+#ifdef CONFIG_CMD_NET
 /*
  * Boots a system using a pxe file
  *
@@ -1579,6 +1589,7 @@ U_BOOT_CMD(
 	"get - try to retrieve a pxe file using tftp\npxe "
 	"boot [pxefile_addr_r] - boot from the pxe file at pxefile_addr_r\n"
 );
+#endif
 
 /*
  * Boots a system using a local disk syslinux/extlinux file
diff --git a/doc/README.arm-unaligned-accesses b/doc/README.arm-unaligned-accesses
deleted file mode 100644
index c37d135852..0000000000
--- a/doc/README.arm-unaligned-accesses
+++ /dev/null
@@ -1,122 +0,0 @@
-If you are reading this because of a data abort: the following MIGHT
-be relevant to your abort, if it was caused by an alignment violation.
-In order to determine this, use the PC from the abort dump along with
-an objdump -s -S of the u-boot ELF binary to locate the function where
-the abort happened; then compare this function with the examples below.
-If they match, then you've been hit with a compiler generated unaligned
-access, and you should rewrite your code or add -mno-unaligned-access
-to the command line of the offending file.
-
-Note that the PC shown in the abort message is relocated. In order to
-be able to match it to an address in the ELF binary dump, you will need
-to know the relocation offset. If your target defines CONFIG_CMD_BDI
-and if you can get to the prompt and enter commands before the abort
-happens, then command "bdinfo" will give you the offset. Otherwise you
-will need to try a build with DEBUG set, which will display the offset,
-or use a debugger and set a breakpoint at relocate_code() to see the
-offset (passed as an argument).
-
-*
-
-Since U-Boot runs on a variety of hardware, some only able to perform
-unaligned accesses with a strong penalty, some unable to perform them
-at all, the policy regarding unaligned accesses is to not perform any,
-unless absolutely necessary because of hardware or standards.
-
-Also, on hardware which permits it, the core is configured to throw
-data abort exceptions on unaligned accesses in order to catch these
-unallowed accesses as early as possible.
-
-Until version 4.7, the gcc default for performing unaligned accesses
-(-mno-unaligned-access) is to emulate unaligned accesses using aligned
-loads and stores plus shifts and masks. Emulated unaligned accesses
-will not be caught by hardware. These accesses may be costly and may
-be actually unnecessary. In order to catch these accesses and remove
-or optimize them, option -munaligned-access is explicitly set for all
-versions of gcc which support it.
-
-From gcc 4.7 onward starting at armv7 architectures, the default for
-performing unaligned accesses is to use unaligned native loads and
-stores (-munaligned-access), because the cost of unaligned accesses
-has dropped on armv7 and beyond. This should not affect U-Boot's
-policy of controlling unaligned accesses, however the compiler may
-generate uncontrolled unaligned accesses on its own in at least one
-known case: when declaring a local initialized char array, e.g.
-
-function foo()
-{
-	char buffer[] = "initial value";
-/* or */
-	char buffer[] = { 'i', 'n', 'i', 't', 0 };
-	...
-}
-
-Under -munaligned-accesses with optimizations on, this declaration
-causes the compiler to generate native loads from the literal string
-and native stores to the buffer, and the literal string alignment
-cannot be controlled. If it is misaligned, then the core will throw
-a data abort exception.
-
-Quite probably the same might happen for 16-bit array initializations
-where the constant is aligned on a boundary which is a multiple of 2
-but not of 4:
-
-function foo()
-{
-	u16 buffer[] = { 1, 2, 3 };
-	...
-}
-
-The long term solution to this issue is to add an option to gcc to
-allow controlling the general alignment of data, including constant
-initialization values.
-
-However this will only apply to the version of gcc which will have such
-an option. For other versions, there are four workarounds:
-
-a) Enforce as a rule that array initializations as described above
-   are forbidden. This is generally not acceptable as they are valid,
-   and usual, C constructs. The only case where they could be rejected
-   is when they actually equate to a const char* declaration, i.e. the
-   array is initialized and never modified in the function's scope.
-
-b) Drop the requirement on unaligned accesses at least for ARMv7,
-   i.e. do not throw a data abort exception upon unaligned accesses.
-   But that will allow adding badly aligned code to U-Boot, only for
-   it to fail when re-used with a stricter target, possibly once the
-   bad code is already in mainline.
-
-c) Relax the -munaligned-access rule globally. This will prevent native
-   unaligned accesses of course, but that will also hide any bug caused
-   by a bad unaligned access, making it much harder to diagnose it. It
-   is actually what already happens when building ARM targets with a
-   pre-4.7 gcc, and it may actually already hide some bugs yet unseen
-   until the target gets compiled with -munaligned-access.
-
-d) Relax the -munaligned-access rule only for for files susceptible to
-   the local initialized array issue and for armv7 architectures and
-   beyond. This minimizes the quantity of code which can hide unwanted
-   misaligned accesses.
-
-The option retained is d).
-
-Considering that actual occurrences of the issue are rare (as of this
-writing, 5 files out of 7840 in U-Boot, or .3%, contain an initialized
-local char array which cannot actually be replaced with a const char*),
-contributors should not be required to systematically try and detect
-the issue in their patches.
-
-Detecting files susceptible to the issue can be automated through a
-filter installed as a hook in .git which recognizes local char array
-initializations. Automation should err on the false positive side, for
-instance flagging non-local arrays as if they were local if they cannot
-be told apart.
-
-In any case, detection shall not prevent committing the patch, but
-shall pre-populate the commit message with a note to the effect that
-this patch contains an initialized local char or 16-bit array and thus
-should be protected from the gcc 4.7 issue.
-
-Upon a positive detection, either $(PLATFORM_NO_UNALIGNED) should be
-added to CFLAGS for the affected file(s), or if the array is a pseudo
-const char*, it should be replaced by an actual one.
diff --git a/doc/README.unaligned-memory-access.txt b/doc/README.unaligned-memory-access.txt
new file mode 100644
index 0000000000..00529f5dac
--- /dev/null
+++ b/doc/README.unaligned-memory-access.txt
@@ -0,0 +1,240 @@
+Editors note: This document is _heavily_ cribbed from the Linux Kernel, with
+really only the section about "Alignment vs. Networking" removed.
+
+UNALIGNED MEMORY ACCESSES
+=========================
+
+Linux runs on a wide variety of architectures which have varying behaviour
+when it comes to memory access. This document presents some details about
+unaligned accesses, why you need to write code that doesn't cause them,
+and how to write such code!
+
+
+The definition of an unaligned access
+=====================================
+
+Unaligned memory accesses occur when you try to read N bytes of data starting
+from an address that is not evenly divisible by N (i.e. addr % N != 0).
+For example, reading 4 bytes of data from address 0x10004 is fine, but
+reading 4 bytes of data from address 0x10005 would be an unaligned memory
+access.
+
+The above may seem a little vague, as memory access can happen in different
+ways. The context here is at the machine code level: certain instructions read
+or write a number of bytes to or from memory (e.g. movb, movw, movl in x86
+assembly). As will become clear, it is relatively easy to spot C statements
+which will compile to multiple-byte memory access instructions, namely when
+dealing with types such as u16, u32 and u64.
+
+
+Natural alignment
+=================
+
+The rule mentioned above forms what we refer to as natural alignment:
+When accessing N bytes of memory, the base memory address must be evenly
+divisible by N, i.e. addr % N == 0.
+
+When writing code, assume the target architecture has natural alignment
+requirements.
+
+In reality, only a few architectures require natural alignment on all sizes
+of memory access. However, we must consider ALL supported architectures;
+writing code that satisfies natural alignment requirements is the easiest way
+to achieve full portability.
+
+
+Why unaligned access is bad
+===========================
+
+The effects of performing an unaligned memory access vary from architecture
+to architecture. It would be easy to write a whole document on the differences
+here; a summary of the common scenarios is presented below:
+
+ - Some architectures are able to perform unaligned memory accesses
+   transparently, but there is usually a significant performance cost.
+ - Some architectures raise processor exceptions when unaligned accesses
+   happen. The exception handler is able to correct the unaligned access,
+   at significant cost to performance.
+ - Some architectures raise processor exceptions when unaligned accesses
+   happen, but the exceptions do not contain enough information for the
+   unaligned access to be corrected.
+ - Some architectures are not capable of unaligned memory access, but will
+   silently perform a different memory access to the one that was requested,
+   resulting in a subtle code bug that is hard to detect!
+
+It should be obvious from the above that if your code causes unaligned
+memory accesses to happen, your code will not work correctly on certain
+platforms and will cause performance problems on others.
+
+
+Code that does not cause unaligned access
+=========================================
+
+At first, the concepts above may seem a little hard to relate to actual
+coding practice. After all, you don't have a great deal of control over
+memory addresses of certain variables, etc.
+
+Fortunately things are not too complex, as in most cases, the compiler
+ensures that things will work for you. For example, take the following
+structure:
+
+	struct foo {
+		u16 field1;
+		u32 field2;
+		u8 field3;
+	};
+
+Let us assume that an instance of the above structure resides in memory
+starting at address 0x10000. With a basic level of understanding, it would
+not be unreasonable to expect that accessing field2 would cause an unaligned
+access. You'd be expecting field2 to be located at offset 2 bytes into the
+structure, i.e. address 0x10002, but that address is not evenly divisible
+by 4 (remember, we're reading a 4 byte value here).
+
+Fortunately, the compiler understands the alignment constraints, so in the
+above case it would insert 2 bytes of padding in between field1 and field2.
+Therefore, for standard structure types you can always rely on the compiler
+to pad structures so that accesses to fields are suitably aligned (assuming
+you do not cast the field to a type of different length).
+
+Similarly, you can also rely on the compiler to align variables and function
+parameters to a naturally aligned scheme, based on the size of the type of
+the variable.
+
+At this point, it should be clear that accessing a single byte (u8 or char)
+will never cause an unaligned access, because all memory addresses are evenly
+divisible by one.
+
+On a related topic, with the above considerations in mind you may observe
+that you could reorder the fields in the structure in order to place fields
+where padding would otherwise be inserted, and hence reduce the overall
+resident memory size of structure instances. The optimal layout of the
+above example is:
+
+	struct foo {
+		u32 field2;
+		u16 field1;
+		u8 field3;
+	};
+
+For a natural alignment scheme, the compiler would only have to add a single
+byte of padding at the end of the structure. This padding is added in order
+to satisfy alignment constraints for arrays of these structures.
+
+Another point worth mentioning is the use of __attribute__((packed)) on a
+structure type. This GCC-specific attribute tells the compiler never to
+insert any padding within structures, useful when you want to use a C struct
+to represent some data that comes in a fixed arrangement 'off the wire'.
+
+You might be inclined to believe that usage of this attribute can easily
+lead to unaligned accesses when accessing fields that do not satisfy
+architectural alignment requirements. However, again, the compiler is aware
+of the alignment constraints and will generate extra instructions to perform
+the memory access in a way that does not cause unaligned access. Of course,
+the extra instructions obviously cause a loss in performance compared to the
+non-packed case, so the packed attribute should only be used when avoiding
+structure padding is of importance.
+
+
+Code that causes unaligned access
+=================================
+
+With the above in mind, let's move onto a real life example of a function
+that can cause an unaligned memory access. The following function taken
+from the Linux Kernel's include/linux/etherdevice.h is an optimized routine
+to compare two ethernet MAC addresses for equality.
+
+bool ether_addr_equal(const u8 *addr1, const u8 *addr2)
+{
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	u32 fold = ((*(const u32 *)addr1) ^ (*(const u32 *)addr2)) |
+		   ((*(const u16 *)(addr1 + 4)) ^ (*(const u16 *)(addr2 + 4)));
+
+	return fold == 0;
+#else
+	const u16 *a = (const u16 *)addr1;
+	const u16 *b = (const u16 *)addr2;
+	return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0;
+#endif
+}
+
+In the above function, when the hardware has efficient unaligned access
+capability, there is no issue with this code.  But when the hardware isn't
+able to access memory on arbitrary boundaries, the reference to a[0] causes
+2 bytes (16 bits) to be read from memory starting at address addr1.
+
+Think about what would happen if addr1 was an odd address such as 0x10003.
+(Hint: it'd be an unaligned access.)
+
+Despite the potential unaligned access problems with the above function, it
+is included in the kernel anyway but is understood to only work normally on
+16-bit-aligned addresses. It is up to the caller to ensure this alignment or
+not use this function at all. This alignment-unsafe function is still useful
+as it is a decent optimization for the cases when you can ensure alignment,
+which is true almost all of the time in ethernet networking context.
+
+
+Here is another example of some code that could cause unaligned accesses:
+	void myfunc(u8 *data, u32 value)
+	{
+		[...]
+		*((u32 *) data) = cpu_to_le32(value);
+		[...]
+	}
+
+This code will cause unaligned accesses every time the data parameter points
+to an address that is not evenly divisible by 4.
+
+In summary, the 2 main scenarios where you may run into unaligned access
+problems involve:
+ 1. Casting variables to types of different lengths
+ 2. Pointer arithmetic followed by access to at least 2 bytes of data
+
+
+Avoiding unaligned accesses
+===========================
+
+The easiest way to avoid unaligned access is to use the get_unaligned() and
+put_unaligned() macros provided by the <asm/unaligned.h> header file.
+
+Going back to an earlier example of code that potentially causes unaligned
+access:
+
+	void myfunc(u8 *data, u32 value)
+	{
+		[...]
+		*((u32 *) data) = cpu_to_le32(value);
+		[...]
+	}
+
+To avoid the unaligned memory access, you would rewrite it as follows:
+
+	void myfunc(u8 *data, u32 value)
+	{
+		[...]
+		value = cpu_to_le32(value);
+		put_unaligned(value, (u32 *) data);
+		[...]
+	}
+
+The get_unaligned() macro works similarly. Assuming 'data' is a pointer to
+memory and you wish to avoid unaligned access, its usage is as follows:
+
+	u32 value = get_unaligned((u32 *) data);
+
+These macros work for memory accesses of any length (not just 32 bits as
+in the examples above). Be aware that when compared to standard access of
+aligned memory, using these macros to access unaligned memory can be costly in
+terms of performance.
+
+If use of such macros is not convenient, another option is to use memcpy(),
+where the source or destination (or both) are of type u8* or unsigned char*.
+Due to the byte-wise nature of this operation, unaligned accesses are avoided.
+
+--
+In the Linux Kernel,
+Authors: Daniel Drake <dsd@gentoo.org>,
+         Johannes Berg <johannes@sipsolutions.net>
+With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt,
+Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, Uli Kunitz,
+Vadim Lobanov
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index b903c45c52..ed2c0c735b 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -8,6 +8,7 @@
 obj-$(CONFIG_AT91_GPIO)	+= at91_gpio.o
 obj-$(CONFIG_INTEL_ICH6_GPIO)	+= intel_ich6_gpio.o
 obj-$(CONFIG_KIRKWOOD_GPIO)	+= kw_gpio.o
+obj-$(CONFIG_KONA_GPIO)	+= kona_gpio.o
 obj-$(CONFIG_MARVELL_GPIO)	+= mvgpio.o
 obj-$(CONFIG_MARVELL_MFP)	+= mvmfp.o
 obj-$(CONFIG_MXC_GPIO)	+= mxc_gpio.o
diff --git a/drivers/gpio/kona_gpio.c b/drivers/gpio/kona_gpio.c
new file mode 100644
index 0000000000..65117438c5
--- /dev/null
+++ b/drivers/gpio/kona_gpio.c
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sysmap.h>
+
+#define GPIO_BASE				(void *)GPIO2_BASE_ADDR
+
+#define GPIO_PASSWD				0x00a5a501
+#define GPIO_PER_BANK				32
+#define GPIO_MAX_BANK_NUM			8
+
+#define GPIO_BANK(gpio)				((gpio) >> 5)
+#define GPIO_BITMASK(gpio)	\
+	(1UL << ((gpio) & (GPIO_PER_BANK - 1)))
+
+#define GPIO_OUT_STATUS(bank)			(0x00000000 + ((bank) << 2))
+#define GPIO_IN_STATUS(bank)			(0x00000020 + ((bank) << 2))
+#define GPIO_OUT_SET(bank)			(0x00000040 + ((bank) << 2))
+#define GPIO_OUT_CLEAR(bank)			(0x00000060 + ((bank) << 2))
+#define GPIO_INT_STATUS(bank)			(0x00000080 + ((bank) << 2))
+#define GPIO_INT_MASK(bank)			(0x000000a0 + ((bank) << 2))
+#define GPIO_INT_MSKCLR(bank)			(0x000000c0 + ((bank) << 2))
+#define GPIO_CONTROL(bank)			(0x00000100 + ((bank) << 2))
+#define GPIO_PWD_STATUS(bank)			(0x00000500 + ((bank) << 2))
+
+#define GPIO_GPPWR_OFFSET			0x00000520
+
+#define GPIO_GPCTR0_DBR_SHIFT			5
+#define GPIO_GPCTR0_DBR_MASK			0x000001e0
+
+#define GPIO_GPCTR0_ITR_SHIFT			3
+#define GPIO_GPCTR0_ITR_MASK			0x00000018
+#define GPIO_GPCTR0_ITR_CMD_RISING_EDGE		0x00000001
+#define GPIO_GPCTR0_ITR_CMD_FALLING_EDGE	0x00000002
+#define GPIO_GPCTR0_ITR_CMD_BOTH_EDGE		0x00000003
+
+#define GPIO_GPCTR0_IOTR_MASK			0x00000001
+#define GPIO_GPCTR0_IOTR_CMD_0UTPUT		0x00000000
+#define GPIO_GPCTR0_IOTR_CMD_INPUT		0x00000001
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	unsigned int value, off;
+
+	writel(GPIO_PASSWD, GPIO_BASE + GPIO_GPPWR_OFFSET);
+	off = GPIO_PWD_STATUS(GPIO_BANK(gpio));
+	value = readl(GPIO_BASE + off) & ~GPIO_BITMASK(gpio);
+	writel(value, GPIO_BASE + off);
+
+	return 0;
+}
+
+int gpio_free(unsigned gpio)
+{
+	unsigned int value, off;
+
+	writel(GPIO_PASSWD, GPIO_BASE + GPIO_GPPWR_OFFSET);
+	off = GPIO_PWD_STATUS(GPIO_BANK(gpio));
+	value = readl(GPIO_BASE + off) | GPIO_BITMASK(gpio);
+	writel(value, GPIO_BASE + off);
+
+	return 0;
+}
+
+int gpio_direction_input(unsigned gpio)
+{
+	u32 val;
+
+	val = readl(GPIO_BASE + GPIO_CONTROL(gpio));
+	val &= ~GPIO_GPCTR0_IOTR_MASK;
+	val |= GPIO_GPCTR0_IOTR_CMD_INPUT;
+	writel(val, GPIO_BASE + GPIO_CONTROL(gpio));
+
+	return 0;
+}
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	int bank_id = GPIO_BANK(gpio);
+	int bitmask = GPIO_BITMASK(gpio);
+	u32 val, off;
+
+	val = readl(GPIO_BASE + GPIO_CONTROL(gpio));
+	val &= ~GPIO_GPCTR0_IOTR_MASK;
+	val |= GPIO_GPCTR0_IOTR_CMD_0UTPUT;
+	writel(val, GPIO_BASE + GPIO_CONTROL(gpio));
+	off = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
+
+	val = readl(GPIO_BASE + off);
+	val |= bitmask;
+	writel(val, GPIO_BASE + off);
+
+	return 0;
+}
+
+int gpio_get_value(unsigned gpio)
+{
+	int bank_id = GPIO_BANK(gpio);
+	int bitmask = GPIO_BITMASK(gpio);
+	u32 val, off;
+
+	/* determine the GPIO pin direction */
+	val = readl(GPIO_BASE + GPIO_CONTROL(gpio));
+	val &= GPIO_GPCTR0_IOTR_MASK;
+
+	/* read the GPIO bank status */
+	off = (GPIO_GPCTR0_IOTR_CMD_INPUT == val) ?
+	    GPIO_IN_STATUS(bank_id) : GPIO_OUT_STATUS(bank_id);
+	val = readl(GPIO_BASE + off);
+
+	/* return the specified bit status */
+	return !!(val & bitmask);
+}
+
+void gpio_set_value(unsigned gpio, int value)
+{
+	int bank_id = GPIO_BANK(gpio);
+	int bitmask = GPIO_BITMASK(gpio);
+	u32 val, off;
+
+	/* determine the GPIO pin direction */
+	val = readl(GPIO_BASE + GPIO_CONTROL(gpio));
+	val &= GPIO_GPCTR0_IOTR_MASK;
+
+	/* this function only applies to output pin */
+	if (GPIO_GPCTR0_IOTR_CMD_INPUT == val) {
+		printf("%s: Cannot set an input pin %d\n", __func__, gpio);
+		return;
+	}
+
+	off = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
+
+	val = readl(GPIO_BASE + off);
+	val |= bitmask;
+	writel(val, GPIO_BASE + off);
+}
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index fa3a875705..36d5e5f1a2 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o
 obj-$(CONFIG_SYS_I2C) += i2c_core.o
 obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
 obj-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o
+obj-$(CONFIG_SYS_I2C_KONA) += kona_i2c.o
 obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
 obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
 obj-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o
diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c
new file mode 100644
index 0000000000..0b1715abf0
--- /dev/null
+++ b/drivers/i2c/kona_i2c.c
@@ -0,0 +1,730 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sysmap.h>
+#include <asm/kona-common/clk.h>
+#include <i2c.h>
+
+/* Hardware register offsets and field defintions */
+#define CS_OFFSET				0x00000020
+#define CS_ACK_SHIFT				3
+#define CS_ACK_MASK				0x00000008
+#define CS_ACK_CMD_GEN_START			0x00000000
+#define CS_ACK_CMD_GEN_RESTART			0x00000001
+#define CS_CMD_SHIFT				1
+#define CS_CMD_CMD_NO_ACTION			0x00000000
+#define CS_CMD_CMD_START_RESTART		0x00000001
+#define CS_CMD_CMD_STOP				0x00000002
+#define CS_EN_SHIFT				0
+#define CS_EN_CMD_ENABLE_BSC			0x00000001
+
+#define TIM_OFFSET				0x00000024
+#define TIM_PRESCALE_SHIFT			6
+#define TIM_P_SHIFT				3
+#define TIM_NO_DIV_SHIFT			2
+#define TIM_DIV_SHIFT				0
+
+#define DAT_OFFSET				0x00000028
+
+#define TOUT_OFFSET				0x0000002c
+
+#define TXFCR_OFFSET				0x0000003c
+#define TXFCR_FIFO_FLUSH_MASK			0x00000080
+#define TXFCR_FIFO_EN_MASK			0x00000040
+
+#define IER_OFFSET				0x00000044
+#define IER_READ_COMPLETE_INT_MASK		0x00000010
+#define IER_I2C_INT_EN_MASK			0x00000008
+#define IER_FIFO_INT_EN_MASK			0x00000002
+#define IER_NOACK_EN_MASK			0x00000001
+
+#define ISR_OFFSET				0x00000048
+#define ISR_RESERVED_MASK			0xffffff60
+#define ISR_CMDBUSY_MASK			0x00000080
+#define ISR_READ_COMPLETE_MASK			0x00000010
+#define ISR_SES_DONE_MASK			0x00000008
+#define ISR_ERR_MASK				0x00000004
+#define ISR_TXFIFOEMPTY_MASK			0x00000002
+#define ISR_NOACK_MASK				0x00000001
+
+#define CLKEN_OFFSET				0x0000004c
+#define CLKEN_AUTOSENSE_OFF_MASK		0x00000080
+#define CLKEN_M_SHIFT				4
+#define CLKEN_N_SHIFT				1
+#define CLKEN_CLKEN_MASK			0x00000001
+
+#define FIFO_STATUS_OFFSET			0x00000054
+#define FIFO_STATUS_RXFIFO_EMPTY_MASK		0x00000004
+#define FIFO_STATUS_TXFIFO_EMPTY_MASK		0x00000010
+
+#define HSTIM_OFFSET				0x00000058
+#define HSTIM_HS_MODE_MASK			0x00008000
+#define HSTIM_HS_HOLD_SHIFT			10
+#define HSTIM_HS_HIGH_PHASE_SHIFT		5
+#define HSTIM_HS_SETUP_SHIFT			0
+
+#define PADCTL_OFFSET				0x0000005c
+#define PADCTL_PAD_OUT_EN_MASK			0x00000004
+
+#define RXFCR_OFFSET				0x00000068
+#define RXFCR_NACK_EN_SHIFT			7
+#define RXFCR_READ_COUNT_SHIFT			0
+#define RXFIFORDOUT_OFFSET			0x0000006c
+
+/* Locally used constants */
+#define MAX_RX_FIFO_SIZE		64U	/* bytes */
+#define MAX_TX_FIFO_SIZE		64U	/* bytes */
+
+#define I2C_TIMEOUT			100000	/* usecs */
+
+#define WAIT_INT_CHK			100	/* usecs */
+#if I2C_TIMEOUT % WAIT_INT_CHK
+#error I2C_TIMEOUT must be a multiple of WAIT_INT_CHK
+#endif
+
+/* Operations that can be commanded to the controller */
+enum bcm_kona_cmd_t {
+	BCM_CMD_NOACTION = 0,
+	BCM_CMD_START,
+	BCM_CMD_RESTART,
+	BCM_CMD_STOP,
+};
+
+enum bus_speed_index {
+	BCM_SPD_100K = 0,
+	BCM_SPD_400K,
+	BCM_SPD_1MHZ,
+};
+
+/* Internal divider settings for standard mode, fast mode and fast mode plus */
+struct bus_speed_cfg {
+	uint8_t time_m;		/* Number of cycles for setup time */
+	uint8_t time_n;		/* Number of cycles for hold time */
+	uint8_t prescale;	/* Prescale divider */
+	uint8_t time_p;		/* Timing coefficient */
+	uint8_t no_div;		/* Disable clock divider */
+	uint8_t time_div;	/* Post-prescale divider */
+};
+
+static const struct bus_speed_cfg std_cfg_table[] = {
+	[BCM_SPD_100K] = {0x01, 0x01, 0x03, 0x06, 0x00, 0x02},
+	[BCM_SPD_400K] = {0x05, 0x01, 0x03, 0x05, 0x01, 0x02},
+	[BCM_SPD_1MHZ] = {0x01, 0x01, 0x03, 0x01, 0x01, 0x03},
+};
+
+struct bcm_kona_i2c_dev {
+	void *base;
+	uint speed;
+	const struct bus_speed_cfg *std_cfg;
+};
+
+/* Keep these two defines in sync */
+#define DEF_SPD 100000
+#define DEF_SPD_ENUM BCM_SPD_100K
+
+#define DEF_DEVICE(num) \
+{(void *)CONFIG_SYS_I2C_BASE##num, DEF_SPD, &std_cfg_table[DEF_SPD_ENUM]}
+
+static struct bcm_kona_i2c_dev g_i2c_devs[CONFIG_SYS_MAX_I2C_BUS] = {
+#ifdef CONFIG_SYS_I2C_BASE0
+	DEF_DEVICE(0),
+#endif
+#ifdef CONFIG_SYS_I2C_BASE1
+	DEF_DEVICE(1),
+#endif
+#ifdef CONFIG_SYS_I2C_BASE2
+	DEF_DEVICE(2),
+#endif
+#ifdef CONFIG_SYS_I2C_BASE3
+	DEF_DEVICE(3),
+#endif
+#ifdef CONFIG_SYS_I2C_BASE4
+	DEF_DEVICE(4),
+#endif
+#ifdef CONFIG_SYS_I2C_BASE5
+	DEF_DEVICE(5),
+#endif
+};
+
+#define I2C_M_TEN	0x0010	/* ten bit address */
+#define I2C_M_RD	0x0001	/* read data */
+#define I2C_M_NOSTART	0x4000	/* no restart between msgs */
+
+struct i2c_msg {
+	uint16_t addr;
+	uint16_t flags;
+	uint16_t len;
+	uint8_t *buf;
+};
+
+static void bcm_kona_i2c_send_cmd_to_ctrl(struct bcm_kona_i2c_dev *dev,
+					  enum bcm_kona_cmd_t cmd)
+{
+	debug("%s, %d\n", __func__, cmd);
+
+	switch (cmd) {
+	case BCM_CMD_NOACTION:
+		writel((CS_CMD_CMD_NO_ACTION << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	case BCM_CMD_START:
+		writel((CS_ACK_CMD_GEN_START << CS_ACK_SHIFT) |
+		       (CS_CMD_CMD_START_RESTART << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	case BCM_CMD_RESTART:
+		writel((CS_ACK_CMD_GEN_RESTART << CS_ACK_SHIFT) |
+		       (CS_CMD_CMD_START_RESTART << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	case BCM_CMD_STOP:
+		writel((CS_CMD_CMD_STOP << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	default:
+		printf("Unknown command %d\n", cmd);
+	}
+}
+
+static void bcm_kona_i2c_enable_clock(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + CLKEN_OFFSET) | CLKEN_CLKEN_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+static void bcm_kona_i2c_disable_clock(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + CLKEN_OFFSET) & ~CLKEN_CLKEN_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+/* Wait until at least one of the mask bit(s) are set */
+static unsigned long wait_for_int_timeout(struct bcm_kona_i2c_dev *dev,
+					  unsigned long time_left,
+					  uint32_t mask)
+{
+	uint32_t status;
+
+	while (time_left) {
+		status = readl(dev->base + ISR_OFFSET);
+
+		if ((status & ~ISR_RESERVED_MASK) == 0) {
+			debug("Bogus I2C interrupt 0x%x\n", status);
+			continue;
+		}
+
+		/* Must flush the TX FIFO when NAK detected */
+		if (status & ISR_NOACK_MASK)
+			writel(TXFCR_FIFO_FLUSH_MASK | TXFCR_FIFO_EN_MASK,
+			       dev->base + TXFCR_OFFSET);
+
+		writel(status & ~ISR_RESERVED_MASK, dev->base + ISR_OFFSET);
+
+		if (status & mask) {
+			/* We are done since one of the mask bits are set */
+			return time_left;
+		}
+		udelay(WAIT_INT_CHK);
+		time_left -= WAIT_INT_CHK;
+	}
+	return 0;
+}
+
+/* Send command to I2C bus */
+static int bcm_kona_send_i2c_cmd(struct bcm_kona_i2c_dev *dev,
+				 enum bcm_kona_cmd_t cmd)
+{
+	int rc = 0;
+	unsigned long time_left = I2C_TIMEOUT;
+
+	/* Send the command */
+	bcm_kona_i2c_send_cmd_to_ctrl(dev, cmd);
+
+	/* Wait for transaction to finish or timeout */
+	time_left = wait_for_int_timeout(dev, time_left, IER_I2C_INT_EN_MASK);
+
+	if (!time_left) {
+		printf("controller timed out\n");
+		rc = -ETIMEDOUT;
+	}
+
+	/* Clear command */
+	bcm_kona_i2c_send_cmd_to_ctrl(dev, BCM_CMD_NOACTION);
+
+	return rc;
+}
+
+/* Read a single RX FIFO worth of data from the i2c bus */
+static int bcm_kona_i2c_read_fifo_single(struct bcm_kona_i2c_dev *dev,
+					 uint8_t *buf, unsigned int len,
+					 unsigned int last_byte_nak)
+{
+	unsigned long time_left = I2C_TIMEOUT;
+
+	/* Start the RX FIFO */
+	writel((last_byte_nak << RXFCR_NACK_EN_SHIFT) |
+	       (len << RXFCR_READ_COUNT_SHIFT), dev->base + RXFCR_OFFSET);
+
+	/* Wait for FIFO read to complete */
+	time_left =
+	    wait_for_int_timeout(dev, time_left, IER_READ_COMPLETE_INT_MASK);
+
+	if (!time_left) {
+		printf("RX FIFO time out\n");
+		return -EREMOTEIO;
+	}
+
+	/* Read data from FIFO */
+	for (; len > 0; len--, buf++)
+		*buf = readl(dev->base + RXFIFORDOUT_OFFSET);
+
+	return 0;
+}
+
+/* Read any amount of data using the RX FIFO from the i2c bus */
+static int bcm_kona_i2c_read_fifo(struct bcm_kona_i2c_dev *dev,
+				  struct i2c_msg *msg)
+{
+	unsigned int bytes_to_read = MAX_RX_FIFO_SIZE;
+	unsigned int last_byte_nak = 0;
+	unsigned int bytes_read = 0;
+	int rc;
+
+	uint8_t *tmp_buf = msg->buf;
+
+	while (bytes_read < msg->len) {
+		if (msg->len - bytes_read <= MAX_RX_FIFO_SIZE) {
+			last_byte_nak = 1;	/* NAK last byte of transfer */
+			bytes_to_read = msg->len - bytes_read;
+		}
+
+		rc = bcm_kona_i2c_read_fifo_single(dev, tmp_buf, bytes_to_read,
+						   last_byte_nak);
+		if (rc < 0)
+			return -EREMOTEIO;
+
+		bytes_read += bytes_to_read;
+		tmp_buf += bytes_to_read;
+	}
+
+	return 0;
+}
+
+/* Write a single byte of data to the i2c bus */
+static int bcm_kona_i2c_write_byte(struct bcm_kona_i2c_dev *dev, uint8_t data,
+				   unsigned int nak_expected)
+{
+	unsigned long time_left = I2C_TIMEOUT;
+	unsigned int nak_received;
+
+	/* Clear pending session done interrupt */
+	writel(ISR_SES_DONE_MASK, dev->base + ISR_OFFSET);
+
+	/* Send one byte of data */
+	writel(data, dev->base + DAT_OFFSET);
+
+	time_left = wait_for_int_timeout(dev, time_left, IER_I2C_INT_EN_MASK);
+
+	if (!time_left) {
+		debug("controller timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	nak_received = readl(dev->base + CS_OFFSET) & CS_ACK_MASK ? 1 : 0;
+
+	if (nak_received ^ nak_expected) {
+		debug("unexpected NAK/ACK\n");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+/* Write a single TX FIFO worth of data to the i2c bus */
+static int bcm_kona_i2c_write_fifo_single(struct bcm_kona_i2c_dev *dev,
+					  uint8_t *buf, unsigned int len)
+{
+	int k;
+	unsigned long time_left = I2C_TIMEOUT;
+	unsigned int fifo_status;
+
+	/* Write data into FIFO */
+	for (k = 0; k < len; k++)
+		writel(buf[k], (dev->base + DAT_OFFSET));
+
+	/* Wait for FIFO to empty */
+	do {
+		time_left =
+		    wait_for_int_timeout(dev, time_left,
+					 (IER_FIFO_INT_EN_MASK |
+					  IER_NOACK_EN_MASK));
+		fifo_status = readl(dev->base + FIFO_STATUS_OFFSET);
+	} while (time_left && !(fifo_status & FIFO_STATUS_TXFIFO_EMPTY_MASK));
+
+	/* Check if there was a NAK */
+	if (readl(dev->base + CS_OFFSET) & CS_ACK_MASK) {
+		printf("unexpected NAK\n");
+		return -EREMOTEIO;
+	}
+
+	/* Check if a timeout occured */
+	if (!time_left) {
+		printf("completion timed out\n");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+/* Write any amount of data using TX FIFO to the i2c bus */
+static int bcm_kona_i2c_write_fifo(struct bcm_kona_i2c_dev *dev,
+				   struct i2c_msg *msg)
+{
+	unsigned int bytes_to_write = MAX_TX_FIFO_SIZE;
+	unsigned int bytes_written = 0;
+	int rc;
+
+	uint8_t *tmp_buf = msg->buf;
+
+	while (bytes_written < msg->len) {
+		if (msg->len - bytes_written <= MAX_TX_FIFO_SIZE)
+			bytes_to_write = msg->len - bytes_written;
+
+		rc = bcm_kona_i2c_write_fifo_single(dev, tmp_buf,
+						    bytes_to_write);
+		if (rc < 0)
+			return -EREMOTEIO;
+
+		bytes_written += bytes_to_write;
+		tmp_buf += bytes_to_write;
+	}
+
+	return 0;
+}
+
+/* Send i2c address */
+static int bcm_kona_i2c_do_addr(struct bcm_kona_i2c_dev *dev,
+				struct i2c_msg *msg)
+{
+	unsigned char addr;
+
+	if (msg->flags & I2C_M_TEN) {
+		/* First byte is 11110XX0 where XX is upper 2 bits */
+		addr = 0xf0 | ((msg->addr & 0x300) >> 7);
+		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+			return -EREMOTEIO;
+
+		/* Second byte is the remaining 8 bits */
+		addr = msg->addr & 0xff;
+		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+			return -EREMOTEIO;
+
+		if (msg->flags & I2C_M_RD) {
+			/* For read, send restart command */
+			if (bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART) < 0)
+				return -EREMOTEIO;
+
+			/* Then re-send the first byte with the read bit set */
+			addr = 0xf0 | ((msg->addr & 0x300) >> 7) | 0x01;
+			if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+				return -EREMOTEIO;
+		}
+	} else {
+		addr = msg->addr << 1;
+
+		if (msg->flags & I2C_M_RD)
+			addr |= 1;
+
+		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+			return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static void bcm_kona_i2c_enable_autosense(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + CLKEN_OFFSET) & ~CLKEN_AUTOSENSE_OFF_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+static void bcm_kona_i2c_config_timing(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + HSTIM_OFFSET) & ~HSTIM_HS_MODE_MASK,
+	       dev->base + HSTIM_OFFSET);
+
+	writel((dev->std_cfg->prescale << TIM_PRESCALE_SHIFT) |
+	       (dev->std_cfg->time_p << TIM_P_SHIFT) |
+	       (dev->std_cfg->no_div << TIM_NO_DIV_SHIFT) |
+	       (dev->std_cfg->time_div << TIM_DIV_SHIFT),
+	       dev->base + TIM_OFFSET);
+
+	writel((dev->std_cfg->time_m << CLKEN_M_SHIFT) |
+	       (dev->std_cfg->time_n << CLKEN_N_SHIFT) |
+	       CLKEN_CLKEN_MASK, dev->base + CLKEN_OFFSET);
+}
+
+/* Master transfer function */
+static int bcm_kona_i2c_xfer(struct bcm_kona_i2c_dev *dev,
+			     struct i2c_msg msgs[], int num)
+{
+	struct i2c_msg *pmsg;
+	int rc = 0;
+	int i;
+
+	/* Enable pad output */
+	writel(0, dev->base + PADCTL_OFFSET);
+
+	/* Enable internal clocks */
+	bcm_kona_i2c_enable_clock(dev);
+
+	/* Send start command */
+	rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_START);
+	if (rc < 0) {
+		printf("Start command failed rc = %d\n", rc);
+		goto xfer_disable_pad;
+	}
+
+	/* Loop through all messages */
+	for (i = 0; i < num; i++) {
+		pmsg = &msgs[i];
+
+		/* Send restart for subsequent messages */
+		if ((i != 0) && ((pmsg->flags & I2C_M_NOSTART) == 0)) {
+			rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART);
+			if (rc < 0) {
+				printf("restart cmd failed rc = %d\n", rc);
+				goto xfer_send_stop;
+			}
+		}
+
+		/* Send slave address */
+		if (!(pmsg->flags & I2C_M_NOSTART)) {
+			rc = bcm_kona_i2c_do_addr(dev, pmsg);
+			if (rc < 0) {
+				debug("NAK from addr %2.2x msg#%d rc = %d\n",
+				      pmsg->addr, i, rc);
+				goto xfer_send_stop;
+			}
+		}
+
+		/* Perform data transfer */
+		if (pmsg->flags & I2C_M_RD) {
+			rc = bcm_kona_i2c_read_fifo(dev, pmsg);
+			if (rc < 0) {
+				printf("read failure\n");
+				goto xfer_send_stop;
+			}
+		} else {
+			rc = bcm_kona_i2c_write_fifo(dev, pmsg);
+			if (rc < 0) {
+				printf("write failure");
+				goto xfer_send_stop;
+			}
+		}
+	}
+
+	rc = num;
+
+xfer_send_stop:
+	/* Send a STOP command */
+	bcm_kona_send_i2c_cmd(dev, BCM_CMD_STOP);
+
+xfer_disable_pad:
+	/* Disable pad output */
+	writel(PADCTL_PAD_OUT_EN_MASK, dev->base + PADCTL_OFFSET);
+
+	/* Stop internal clock */
+	bcm_kona_i2c_disable_clock(dev);
+
+	return rc;
+}
+
+static uint bcm_kona_i2c_assign_bus_speed(struct bcm_kona_i2c_dev *dev,
+					  uint speed)
+{
+	switch (speed) {
+	case 100000:
+		dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
+		break;
+	case 400000:
+		dev->std_cfg = &std_cfg_table[BCM_SPD_400K];
+		break;
+	case 1000000:
+		dev->std_cfg = &std_cfg_table[BCM_SPD_1MHZ];
+		break;
+	default:
+		printf("%d hz bus speed not supported\n", speed);
+		return -EINVAL;
+	}
+	dev->speed = speed;
+	return 0;
+}
+
+static void bcm_kona_i2c_init(struct bcm_kona_i2c_dev *dev)
+{
+	/* Parse bus speed */
+	bcm_kona_i2c_assign_bus_speed(dev, dev->speed);
+
+	/* Enable internal clocks */
+	bcm_kona_i2c_enable_clock(dev);
+
+	/* Configure internal dividers */
+	bcm_kona_i2c_config_timing(dev);
+
+	/* Disable timeout */
+	writel(0, dev->base + TOUT_OFFSET);
+
+	/* Enable autosense */
+	bcm_kona_i2c_enable_autosense(dev);
+
+	/* Enable TX FIFO */
+	writel(TXFCR_FIFO_FLUSH_MASK | TXFCR_FIFO_EN_MASK,
+	       dev->base + TXFCR_OFFSET);
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	/* Clear all pending interrupts */
+	writel(ISR_CMDBUSY_MASK |
+	       ISR_READ_COMPLETE_MASK |
+	       ISR_SES_DONE_MASK |
+	       ISR_ERR_MASK |
+	       ISR_TXFIFOEMPTY_MASK | ISR_NOACK_MASK, dev->base + ISR_OFFSET);
+
+	/* Enable the controller but leave it idle */
+	bcm_kona_i2c_send_cmd_to_ctrl(dev, BCM_CMD_NOACTION);
+
+	/* Disable pad output */
+	writel(PADCTL_PAD_OUT_EN_MASK, dev->base + PADCTL_OFFSET);
+}
+
+/*
+ * uboot layer
+ */
+struct bcm_kona_i2c_dev *kona_get_dev(struct i2c_adapter *adap)
+{
+	return &g_i2c_devs[adap->hwadapnr];
+}
+
+static void kona_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
+{
+	struct bcm_kona_i2c_dev *dev = kona_get_dev(adap);
+
+	if (clk_bsc_enable(dev->base))
+		return;
+
+	bcm_kona_i2c_init(dev);
+}
+
+static int kona_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+			 int alen, uchar *buffer, int len)
+{
+	/* msg[0] writes the addr, msg[1] reads the data */
+	struct i2c_msg msg[2];
+	unsigned char msgbuf0[64];
+	struct bcm_kona_i2c_dev *dev = kona_get_dev(adap);
+
+	msg[0].addr = chip;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = msgbuf0;	/* msgbuf0 contains incrementing reg addr */
+
+	msg[1].addr = chip;
+	msg[1].flags = I2C_M_RD;
+	/* msg[1].buf dest ptr increments each read */
+
+	msgbuf0[0] = (unsigned char)addr;
+	msg[1].buf = buffer;
+	msg[1].len = len;
+	if (bcm_kona_i2c_xfer(dev, msg, 2) < 0) {
+		/* Sending 2 i2c messages */
+		kona_i2c_init(adap, adap->speed, adap->slaveaddr);
+		debug("I2C read: I/O error\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+static int kona_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+			  int alen, uchar *buffer, int len)
+{
+	struct i2c_msg msg[0];
+	unsigned char msgbuf0[64];
+	unsigned int i;
+	struct bcm_kona_i2c_dev *dev = kona_get_dev(adap);
+
+	msg[0].addr = chip;
+	msg[0].flags = 0;
+	msg[0].len = 2;		/* addr byte plus data */
+	msg[0].buf = msgbuf0;
+
+	for (i = 0; i < len; i++) {
+		msgbuf0[0] = addr++;
+		msgbuf0[1] = buffer[i];
+		if (bcm_kona_i2c_xfer(dev, msg, 1) < 0) {
+			kona_i2c_init(adap, adap->speed, adap->slaveaddr);
+			debug("I2C write: I/O error\n");
+			return -EIO;
+		}
+	}
+	return 0;
+}
+
+static int kona_i2c_probe(struct i2c_adapter *adap, uchar chip)
+{
+	uchar tmp;
+
+	/*
+	 * read addr 0x0 of the given chip.
+	 */
+	return kona_i2c_read(adap, chip, 0x0, 1, &tmp, 1);
+}
+
+static uint kona_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed)
+{
+	struct bcm_kona_i2c_dev *dev = kona_get_dev(adap);
+	return bcm_kona_i2c_assign_bus_speed(dev, speed);
+}
+
+/*
+ * Register kona i2c adapters. Keep the order below so
+ * that the bus number matches the adapter number.
+ */
+#define DEF_ADAPTER(num) \
+U_BOOT_I2C_ADAP_COMPLETE(kona##num, kona_i2c_init, kona_i2c_probe, \
+			 kona_i2c_read, kona_i2c_write, \
+			 kona_i2c_set_bus_speed, DEF_SPD, 0x00, num)
+
+#ifdef CONFIG_SYS_I2C_BASE0
+	DEF_ADAPTER(0)
+#endif
+#ifdef CONFIG_SYS_I2C_BASE1
+	DEF_ADAPTER(1)
+#endif
+#ifdef CONFIG_SYS_I2C_BASE2
+	DEF_ADAPTER(2)
+#endif
+#ifdef CONFIG_SYS_I2C_BASE3
+	DEF_ADAPTER(3)
+#endif
+#ifdef CONFIG_SYS_I2C_BASE4
+	DEF_ADAPTER(4)
+#endif
+#ifdef CONFIG_SYS_I2C_BASE5
+	DEF_ADAPTER(5)
+#endif
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index e793ed994e..931922bc4a 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
 obj-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o
 obj-$(CONFIG_SDHCI) += sdhci.o
 obj-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o
+obj-$(CONFIG_KONA_SDHCI) += kona_sdhci.o
 obj-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o
 obj-$(CONFIG_SH_MMCIF) += sh_mmcif.o
 obj-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o
diff --git a/drivers/mmc/kona_sdhci.c b/drivers/mmc/kona_sdhci.c
new file mode 100644
index 0000000000..77e42c8afe
--- /dev/null
+++ b/drivers/mmc/kona_sdhci.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <sdhci.h>
+#include <asm/errno.h>
+#include <asm/kona-common/clk.h>
+
+#define SDHCI_CORECTRL_OFFSET		0x00008000
+#define SDHCI_CORECTRL_EN		0x01
+#define SDHCI_CORECTRL_RESET		0x02
+
+#define SDHCI_CORESTAT_OFFSET		0x00008004
+#define SDHCI_CORESTAT_CD_SW		0x01
+
+#define SDHCI_COREIMR_OFFSET		0x00008008
+#define SDHCI_COREIMR_IP		0x01
+
+static int init_kona_mmc_core(struct sdhci_host *host)
+{
+	unsigned int mask;
+	unsigned int timeout;
+
+	if (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & SDHCI_RESET_ALL) {
+		printf("%s: sd host controller reset error\n", __func__);
+		return 1;
+	}
+
+	/* For kona a hardware reset before anything else. */
+	mask = sdhci_readl(host, SDHCI_CORECTRL_OFFSET) | SDHCI_CORECTRL_RESET;
+	sdhci_writel(host, mask, SDHCI_CORECTRL_OFFSET);
+
+	/* Wait max 100 ms */
+	timeout = 1000;
+	do {
+		if (timeout == 0) {
+			printf("%s: reset timeout error\n", __func__);
+			return 1;
+		}
+		timeout--;
+		udelay(100);
+	} while (0 ==
+		 (sdhci_readl(host, SDHCI_CORECTRL_OFFSET) &
+		  SDHCI_CORECTRL_RESET));
+
+	/* Clear the reset bit. */
+	mask = mask & ~SDHCI_CORECTRL_RESET;
+	sdhci_writel(host, mask, SDHCI_CORECTRL_OFFSET);
+
+	/* Enable AHB clock */
+	mask = sdhci_readl(host, SDHCI_CORECTRL_OFFSET);
+	sdhci_writel(host, mask | SDHCI_CORECTRL_EN, SDHCI_CORECTRL_OFFSET);
+
+	/* Enable interrupts */
+	sdhci_writel(host, SDHCI_COREIMR_IP, SDHCI_COREIMR_OFFSET);
+
+	/* Make sure Card is detected in controller */
+	mask = sdhci_readl(host, SDHCI_CORESTAT_OFFSET);
+	sdhci_writel(host, mask | SDHCI_CORESTAT_CD_SW, SDHCI_CORESTAT_OFFSET);
+
+	/* Wait max 100 ms */
+	timeout = 1000;
+	while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
+		if (timeout == 0) {
+			printf("%s: CARD DETECT timeout error\n", __func__);
+			return 1;
+		}
+		timeout--;
+		udelay(100);
+	}
+	return 0;
+}
+
+int kona_sdhci_init(int dev_index, u32 min_clk, u32 quirks)
+{
+	int ret = 0;
+	u32 max_clk;
+	void *reg_base;
+	struct sdhci_host *host = NULL;
+
+	host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
+	if (!host) {
+		printf("%s: sdhci host malloc fail!\n", __func__);
+		return -ENOMEM;
+	}
+	switch (dev_index) {
+	case 0:
+		reg_base = (void *)CONFIG_SYS_SDIO_BASE0;
+		ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO0_MAX_CLK,
+				      &max_clk);
+		break;
+	case 1:
+		reg_base = (void *)CONFIG_SYS_SDIO_BASE1;
+		ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO1_MAX_CLK,
+				      &max_clk);
+		break;
+	case 2:
+		reg_base = (void *)CONFIG_SYS_SDIO_BASE2;
+		ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO2_MAX_CLK,
+				      &max_clk);
+		break;
+	case 3:
+		reg_base = (void *)CONFIG_SYS_SDIO_BASE3;
+		ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO3_MAX_CLK,
+				      &max_clk);
+		break;
+	default:
+		printf("%s: sdio dev index %d not supported\n",
+		       __func__, dev_index);
+		ret = -EINVAL;
+	}
+	if (ret)
+		return ret;
+
+	host->name = "kona-sdhci";
+	host->ioaddr = reg_base;
+	host->quirks = quirks;
+	host->host_caps = MMC_MODE_HC;
+
+	if (init_kona_mmc_core(host))
+		return -EINVAL;
+
+	if (quirks & SDHCI_QUIRK_REG32_RW)
+		host->version = sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16;
+	else
+		host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+
+	add_sdhci(host, max_clk, min_clk);
+	return ret;
+}
diff --git a/fs/ubifs/Makefile b/fs/ubifs/Makefile
index 6b1a9a5b00..8c8c6ac683 100644
--- a/fs/ubifs/Makefile
+++ b/fs/ubifs/Makefile
@@ -13,6 +13,3 @@ obj-y := ubifs.o io.o super.o sb.o master.o lpt.o
 obj-y += lpt_commit.o scan.o lprops.o
 obj-y += tnc.o tnc_misc.o debug.o crc16.o budget.o
 obj-y += log.o orphan.o recovery.o replay.o
-
-# SEE README.arm-unaligned-accesses
-CFLAGS_super.o := $(PLATFORM_NO_UNALIGNED)
diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h
index 7e1eb4bf5e..458952fb58 100644
--- a/include/asm-generic/sections.h
+++ b/include/asm-generic/sections.h
@@ -63,28 +63,16 @@ extern char __image_copy_end[];
 extern void _start(void);
 
 /*
- * ARM needs to use offsets for symbols, since the values of some symbols
- * are not resolved prior to relocation (and are just 0). Maybe this can be
- * resolved, or maybe other architectures are similar, iwc this should be
- * promoted to an architecture option.
+ * ARM defines its symbols as char[]. Other arches define them as ulongs.
  */
 #ifdef CONFIG_ARM
-#define CONFIG_SYS_SYM_OFFSETS
-#endif
-
-#ifdef CONFIG_SYS_SYM_OFFSETS
-/* Start/end of the relocation entries, as an offset from _start */
-extern ulong _rel_dyn_start_ofs;
-extern ulong _rel_dyn_end_ofs;
-
-/* End of the region to be relocated, as an offset form _start */
-extern ulong _image_copy_end_ofs;
 
-extern ulong _bss_start_ofs;	/* BSS start relative to _start */
-extern ulong _bss_end_ofs;		/* BSS end relative to _start */
-extern ulong _end_ofs;		/* end of image relative to _start */
-
-extern ulong _TEXT_BASE;	/* code start */
+extern char __bss_start[];
+extern char __bss_end[];
+extern char __image_copy_start[];
+extern char __image_copy_end[];
+extern char __rel_dyn_start[];
+extern char __rel_dyn_end[];
 
 #else /* don't use offsets: */
 
diff --git a/include/bitfield.h b/include/bitfield.h
new file mode 100644
index 0000000000..ec4815c8e0
--- /dev/null
+++ b/include/bitfield.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+/*
+ * Bitfield operations
+ *
+ * These are generic bitfield operations which allow manipulation of variable
+ * width bitfields within a word. One use of this would be to use data tables
+ * to determine how to reprogram fields within R/W hardware registers.
+ *
+ * Example:
+ *
+ *            old_reg_val
+ * +--------+----+---+--+-----+----------+
+ * |        |    |   |  | old |          |
+ * +--------+----+---+--+-----+----------+
+ *
+ *            new_reg_val
+ * +--------+----+---+--+-----+----------+
+ * |        |    |   |  | new |          |
+ * +--------+----+---+--+-----+----------+
+ *
+ * mask = bitfield_mask(10, 5);
+ * old = bitfield_extract(old_reg_val, 10, 5);
+ * new_reg_val = bitfield_replace(old_reg_val, 10, 5, new);
+ *
+ * The numbers 10 and 5 could for example come from data
+ * tables which describe all bitfields in all registers.
+ */
+
+#include <linux/types.h>
+
+/* Produces a mask of set bits covering a range of a uint value */
+static inline uint bitfield_mask(uint shift, uint width)
+{
+	return ((1 << width) - 1) << shift;
+}
+
+/* Extract the value of a bitfield found within a given register value */
+static inline uint bitfield_extract(uint reg_val, uint shift, uint width)
+{
+	return (reg_val & bitfield_mask(shift, width)) >> shift;
+}
+
+/*
+ * Replace the value of a bitfield found within a given register value
+ * Returns the newly modified uint value with the replaced field.
+ */
+static inline uint bitfield_replace(uint reg_val, uint shift, uint width,
+				    uint bitfield_val)
+{
+	uint mask = bitfield_mask(shift, width);
+
+	return (reg_val & ~mask) | (bitfield_val << shift);
+}
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 73a9adb293..59a8f36d16 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -20,6 +20,7 @@
 
 #define MACH_TYPE_TIAM335EVM		3589	/* Until the next sync */
 #define CONFIG_MACH_TYPE		MACH_TYPE_TIAM335EVM
+#define CONFIG_BOARD_LATE_INIT
 
 /* Clock Defines */
 #define V_OSCK				24000000  /* Clock output from T2 */
@@ -31,6 +32,12 @@
 /* Always 128 KiB env size */
 #define CONFIG_ENV_SIZE			(128 << 10)
 
+/* Enhance our eMMC support / experience. */
+#define CONFIG_CMD_GPT
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+
 #ifdef CONFIG_NAND
 #define NANDARGS \
 	"mtdids=" MTDIDS_DEFAULT "\0" \
@@ -64,6 +71,9 @@
 	"bootfile=zImage\0" \
 	"fdtfile=undefined\0" \
 	"console=ttyO0,115200n8\0" \
+	"partitions=" \
+		"uuid_disk=${uuid_gpt_disk};" \
+		"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
 	"optargs=\0" \
 	"mmcdev=0\0" \
 	"mmcroot=/dev/mmcblk0p2 ro\0" \
@@ -295,6 +305,9 @@
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
 /* disable host part of MUSB in SPL */
 #undef CONFIG_MUSB_HOST
+/* disable EFI partitions and partition UUID support */
+#undef CONFIG_PARTITION_UUIDS
+#undef CONFIG_EFI_PARTITION
 /*
  * Disable CPSW SPL support so we fit within the 101KiB limit.
  */
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 9a44990e2f..c773a18369 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -104,6 +104,12 @@
 #define CONFIG_SPL_SPI_CS              0
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
 
+/* Enhance our eMMC support / experience. */
+#define CONFIG_CMD_GPT
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x80200000\0" \
@@ -115,6 +121,9 @@
 	"bootdir=/boot\0" \
 	"bootfile=zImage\0" \
 	"console=ttyO0,115200n8\0" \
+	"partitions=" \
+		"uuid_disk=${uuid_gpt_disk};" \
+		"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
 	"optargs=\0" \
 	"mmcdev=0\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \
diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
new file mode 100644
index 0000000000..8e1c81fc13
--- /dev/null
+++ b/include/configs/bcm28155_ap.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier:      GPL-2.0+
+ */
+
+#ifndef __BCM28155_AP_H
+#define __BCM28155_AP_H
+
+#include <asm/sizes.h>
+#include <asm/arch/sysmap.h>
+
+/* Architecture, CPU, chip, mach, etc */
+#define CONFIG_ARMV7
+#define CONFIG_KONA
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/*
+ * Memory configuration
+ */
+#define CONFIG_SYS_TEXT_BASE		0xae000000
+
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+#define CONFIG_SYS_SDRAM_SIZE		0x80000000
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CONFIG_SYS_MALLOC_LEN		SZ_4M	/* see armv7/start.S. */
+#define CONFIG_STACKSIZE		SZ_256K
+
+/* GPIO Driver */
+#define CONFIG_KONA_GPIO
+
+/* MMC/SD Driver */
+#define CONFIG_SDHCI
+#define CONFIG_MMC_SDMA
+#define CONFIG_KONA_SDHCI
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+
+#define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR
+#define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR
+#define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR
+#define CONFIG_SYS_SDIO_BASE3 SDIO4_BASE_ADDR
+#define CONFIG_SYS_SDIO0_MAX_CLK 48000000
+#define CONFIG_SYS_SDIO1_MAX_CLK 48000000
+#define CONFIG_SYS_SDIO2_MAX_CLK 48000000
+#define CONFIG_SYS_SDIO3_MAX_CLK 48000000
+#define CONFIG_SYS_SDIO0 "sdio1"
+#define CONFIG_SYS_SDIO1 "sdio2"
+#define CONFIG_SYS_SDIO2 "sdio3"
+#define CONFIG_SYS_SDIO3 "sdio4"
+
+/* I2C Driver */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_KONA
+#define CONFIG_SYS_SPD_BUS_NUM	3	/* Start with PMU bus */
+#define CONFIG_SYS_MAX_I2C_BUS	4
+#define CONFIG_SYS_I2C_BASE0	BSC1_BASE_ADDR
+#define CONFIG_SYS_I2C_BASE1	BSC2_BASE_ADDR
+#define CONFIG_SYS_I2C_BASE2	BSC3_BASE_ADDR
+#define CONFIG_SYS_I2C_BASE3	PMU_BSC_BASE_ADDR
+
+/* Timer Driver */
+#define CONFIG_SYS_TIMER_RATE		32000
+#define CONFIG_SYS_TIMER_COUNTER	(TIMER_BASE_ADDR + 4) /* STCLO offset */
+
+/* Init functions */
+#define CONFIG_MISC_INIT_R	/* board's misc_init_r function */
+
+/* Some commands use this as the default load address */
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
+
+/* No mtest functions as recommended */
+#undef CONFIG_CMD_MEMORY
+
+/*
+ * This is the initial SP which is used only briefly for relocating the u-boot
+ * image to the top of SDRAM. After relocation u-boot moves the stack to the
+ * proper place.
+ */
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
+
+/* Serial Info */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+/* Post pad 3 bytes after each reg addr */
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		13000000
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550_COM1		0x3e000000
+
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_ENV_SIZE			0x10000
+#define CONFIG_ENV_IS_NOWHERE
+
+#define CONFIG_SYS_NO_FLASH	/* Not using NAND/NOR unmanaged flash */
+
+/* console configuration */
+#define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+			sizeof(CONFIG_SYS_PROMPT) + 16)	/* Printbuffer size */
+#define CONFIG_SYS_MAXARGS		64
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+/*
+ * One partition type must be defined for part.c
+ * This is necessary for the fatls command to work on an SD card
+ * for example.
+ */
+#define CONFIG_DOS_PARTITION
+
+/* version string, parser, etc */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+
+/* Initial upstream - boot to cmd prompt only */
+#define CONFIG_BOOTCOMMAND		""
+
+/* Commands */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_FAT_WRITE
+
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+#endif /* __BCM28155_AP_H */
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
new file mode 100644
index 0000000000..1f57bd2744
--- /dev/null
+++ b/include/configs/bur_am335x_common.h
@@ -0,0 +1,197 @@
+/*
+ * bur_am335x_common.h
+ *
+ * common parts used by B&R AM335x based boards
+ *
+ * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> -
+ * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+ *
+ * SPDX-License-Identifier:        GPL-2.0+
+ */
+
+#ifndef __BUR_AM335X_COMMON_H__
+#define __BUR_AM335X_COMMON_H__
+/* ------------------------------------------------------------------------- */
+#define CONFIG_AM33XX
+#define CONFIG_OMAP
+#define CONFIG_OMAP_COMMON
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_SYS_CACHELINE_SIZE	64
+#define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
+
+/* Timer information */
+#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
+
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_POWER_TPS65217
+
+#define CONFIG_SYS_NO_FLASH		/* have no NOR-flash */
+
+#include <asm/arch/omap.h>
+
+/* NS16550 Configuration */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		48000000
+#define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
+#define CONFIG_BAUDRATE			115200
+
+/* Network defines */
+#define CONFIG_CMD_NET			/* 'bootp' and 'tftp' */
+#define CONFIG_CMD_DHCP
+#define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT		4
+#define CONFIG_CMD_PING
+#define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
+#define CONFIG_MII			/* Required in net/eth.c */
+#define CONFIG_SPL_ETH_SUPPORT
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ADDR			1
+#define CONFIG_PHY_NATSEMI
+#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT		/* used for a fetching MAC-Address */
+#define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
+
+/*
+ * SPL related defines.  The Public RAM memory map the ROM defines the
+ * area between 0x402F0400 and 0x4030B800 as a download area and
+ * 0x4030B800 to 0x4030CE00 as a public stack area.  The ROM also
+ * supports X-MODEM loading via UART, and we leverage this and then use
+ * Y-MODEM to load u-boot.img, when booted over UART.
+ */
+#define CONFIG_SPL_TEXT_BASE		0x402F0400
+#define CONFIG_SPL_MAX_SIZE		(0x4030B800 - CONFIG_SPL_TEXT_BASE)
+
+/*
+ * Since SPL did pll and ddr initialization for us,
+ * we don't need to do it twice.
+ */
+#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif /* !CONFIG_SPL_BUILD, ... */
+/*
+ * Our DDR memory always starts at 0x80000000 and U-Boot shall have
+ * relocated itself to higher in memory by the time this value is used.
+ */
+#define CONFIG_SYS_LOAD_ADDR		0x80000000
+/*
+ * ----------------------------------------------------------------------------
+ * DDR information.  We say (for simplicity) that we have 1 bank,
+ * always, even when we have more.  We always start at 0x80000000,
+ * and we place the initial stack pointer in our SRAM.
+ */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+#define CONFIG_SYS_INIT_SP_ADDR		(NON_SECURE_SRAM_END - \
+					GENERATED_GBL_DATA_SIZE)
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP24XX
+
+/* GPIO */
+#define CONFIG_OMAP_GPIO
+#define CONFIG_CMD_GPIO
+/*
+ * ----------------------------------------------------------------------------
+ * The following are general good-enough settings for U-Boot.  We set a
+ * large malloc pool as we generally have a lot of DDR, and we opt for
+ * function over binary size in the main portion of U-Boot as this is
+ * generally easily constrained later if needed.  We enable the config
+ * options that give us information in the environment about what board
+ * we are on so we do not need to rely on the command prompt.  We set a
+ * console baudrate of 115200 and use the default baud rate table.
+ */
+#define CONFIG_SYS_MALLOC_LEN		(1024 << 10)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT		"U-Boot (BuR V2.0)# "
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_ENV_OVERWRITE		/* Overwrite ethaddr / serial# */
+
+/* As stated above, the following choices are optional. */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_VERSION_VARIABLE
+
+/* We set the max number of command args high to avoid HUSH bugs. */
+#define CONFIG_SYS_MAXARGS		64
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		512
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE +\
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+/*
+ * For commands to use, we take the default list and add a few other
+ * useful commands.  Note that we must have set CONFIG_SYS_NO_FLASH
+ * prior to this include, in order to skip a few commands.  When we do
+ * have flash, if we expect these commands they must be enabled in that
+ * config.  If desired, a specific list of desired commands can be used
+ * instead.
+ */
+#include <config_cmd_default.h>
+/* undefine commands, which we do not need */
+#undef CONFIG_CMD_EDITENV
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_ITEST
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+#undef CONFIG_CMD_CRC32
+/* define command we need always */
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_SOURCE
+
+/*
+ * Our platforms make use of SPL to initalize the hardware (primarily
+ * memory) enough for full U-Boot to be loaded.  We also support Falcon
+ * Mode so that the Linux kernel can be booted directly from SPL
+ * instead, if desired.  We make use of the general SPL framework found
+ * under common/spl/.  Given our generally common memory map, we set a
+ * number of related defaults and sizes here.
+ */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+/*
+ * Place the image at the start of the ROM defined image space.
+ * We limit our size to the ROM-defined downloaded image area, and use the
+ * rest of the space for stack.  We load U-Boot itself into memory at
+ * 0x80800000 for legacy reasons (to not conflict with older SPLs).  We
+ * have our BSS be placed 1MiB after this, to allow for the default
+ * Linux kernel address of 0x80008000 to work, in the Falcon Mode case.
+ * We have the SPL malloc pool at the end of the BSS area.
+ *
+ * ----------------------------------------------------------------------------
+ */
+#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
+#undef  CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE		0x80800000
+#define CONFIG_SPL_BSS_START_ADDR	0x80A00000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
+#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
+					CONFIG_SPL_BSS_MAX_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
+
+/* General parts of the framework, required. */
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_YMODEM_SUPPORT
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"
+
+#endif	/* ! __BUR_AM335X_COMMON_H__ */
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 7729a02ab6..08c67f588c 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -45,13 +45,6 @@
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_OF_LIBFDT		1
-/*
- * The early kernel mapping on ARM currently only maps from the base of DRAM
- * to the end of the kernel image.  The kernel is loaded at DRAM base + 0x8000.
- * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
- * so that leaves DRAM base to DRAM base + 0x4000 available.
- */
-#define CONFIG_SYS_BOOTMAPSZ	        0x4000
 
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 86574c836a..c67cf60c0c 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -34,8 +34,19 @@
 
 #define CONFIG_SYS_OMAP_ABE_SYSCK
 
+/* Define the default GPT table for eMMC */
+#define PARTS_DEFAULT \
+	"uuid_disk=${uuid_gpt_disk};" \
+	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
+
 #include <configs/ti_omap5_common.h>
 
+/* Enhance our eMMC support / experience. */
+#define CONFIG_CMD_GPT
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+
 /* CPSW Ethernet */
 #define CONFIG_CMD_NET			/* 'bootp' and 'tftp' */
 #define CONFIG_CMD_DHCP
diff --git a/include/configs/kwb.h b/include/configs/kwb.h
new file mode 100644
index 0000000000..0f631c0f60
--- /dev/null
+++ b/include/configs/kwb.h
@@ -0,0 +1,128 @@
+/*
+ * kwb.h
+ *
+ * specific parts for B&R KWB Motherboard
+ *
+ * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> -
+ * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+ *
+ * SPDX-License-Identifier:        GPL-2.0+
+ */
+
+#ifndef __CONFIG_KWB_H__
+#define __CONFIG_KWB_H__
+
+#include <configs/bur_am335x_common.h>
+/* ------------------------------------------------------------------------- */
+/* Clock Defines */
+#define V_OSCK				26000000  /* Clock output from T2 */
+#define V_SCLK				(V_OSCK)
+
+#define CONFIG_POWER_TPS65217
+
+#define CONFIG_MACH_TYPE		3589
+/* I2C IP block */
+#define CONFIG_SYS_OMAP24_I2C_SPEED_PSOC	20000
+
+/* GPIO */
+#define CONFIG_SPL_GPIO_SUPPORT
+
+/* MMC/SD IP block */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_CMD_MMC
+#define CONFIG_SUPPORT_EMMC_BOOT
+/* RAW SD card / eMMC locations. */
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /*addr. 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x200 /* 256 KB */
+#define CONFIG_SPL_MMC_SUPPORT
+
+#undef CONFIG_SPL_OS_BOOT
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_SYS_SPL_ARGS_ADDR		0x80F80000
+
+/* RAW SD card / eMMC */
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x900	/* address 0x120000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x80	/* address 0x10000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */
+
+#endif /* CONFIG_SPL_OS_BOOT */
+
+/* Always 128 KiB env size */
+#define CONFIG_ENV_SIZE			(128 << 10)
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"autoload=0\0" \
+	"loadaddr=0x80100000\0" \
+	"bootfile=arimg\0" \
+	"usbboot=echo Booting from USB-Stick ...; " \
+		"usb start; " \
+		"fatload usb 0 ${loadaddr} ${bootfile}; " \
+		"usb stop; " \
+		"go ${loadaddr};\0" \
+	"netboot=echo Booting from network ...; " \
+		"setenv autoload 0; " \
+		"dhcp; " \
+		"tftp ${loadaddr} arimg; " \
+		"go ${loadaddr}\0" \
+	"usbupdate=echo Updating UBOOT from USB-Stick ...; " \
+		"usb start; " \
+		"fatload usb 0 0x80000000 updateubootusb.img; " \
+		"source;\0" \
+	"netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
+		"setenv autoload 0; " \
+		"dhcp;" \
+		"tftp 0x80000000 updateUBOOT.img;" \
+		"source;\0"
+#endif /* !CONFIG_SPL_BUILD*/
+
+#define CONFIG_BOOTCOMMAND \
+	"run usbupdate;"
+#define CONFIG_BOOTDELAY		1 /* TODO: für release auf 0 setzen */
+
+/* undefine command which we not need here */
+#undef	CONFIG_BOOTM_LINUX
+#undef	CONFIG_BOOTM_NETBSD
+#undef	CONFIG_BOOTM_PLAN9
+#undef	CONFIG_BOOTM_RTEMS
+#undef	CONFIG_GZIP
+#undef	CONFIG_ZLIB
+#undef CONFIG_CMD_CRC32
+
+/* USB configuration */
+#define CONFIG_USB_MUSB_DSPS
+#define CONFIG_ARCH_MISC_INIT
+#define CONFIG_MUSB_PIO_ONLY
+#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
+/* attention! not only for gadget, enables also highspeed in hostmode */
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_MUSB_HOST
+#define CONFIG_AM335X_USB0
+#define CONFIG_AM335X_USB0_MODE	MUSB_HOST
+
+#ifdef CONFIG_MUSB_HOST
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#endif /* CONFIG_MUSB_HOST */
+
+#undef CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		1
+#define CONFIG_SYS_MMC_ENV_PART		2
+#define CONFIG_ENV_OFFSET		0x40000	/* TODO: Adresse definieren */
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+/*
+ * Common filesystems support.  When we have removable storage we
+ * enabled a number of useful commands and support.
+ */
+#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
+#define CONFIG_CMD_FS_GENERIC
+#endif /* CONFIG_MMC, ... */
+
+#endif	/* ! __CONFIG_TSERIES_H__ */
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index dcd29ce7cb..7c5c2f4d1c 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -98,6 +98,7 @@
 
 /* EHCI */
 #define CONFIG_USB_STORAGE
+#define CONFIG_OMAP3_GPIO_2
 #define CONFIG_OMAP3_GPIO_5
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_OMAP
@@ -263,10 +264,9 @@
 			"${mtdparts} "					\
 			"vram=6M omapfb.vram=1:2M,2:2M,3:2M "		\
 			"omapdss.def_disp=lcd;"				\
-		"bootm 0x82000000 0x84000000\0"
-
-#define CONFIG_BOOTCOMMAND \
-	"run nandboot"
+		"bootm 0x82000000 0x84000000\0"				\
+	"bootcmd=mmc rescan;if fatload mmc 0 82000000 loadbootscr.scr;"	\
+		"then source 82000000;else run nandboot;fi\0"
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
@@ -395,6 +395,7 @@
 #define CONFIG_SYS_NAND_ECCSIZE		256
 #define CONFIG_SYS_NAND_ECCBYTES	3
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_SW
+#define CONFIG_SPL_NAND_SOFTECC
 
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
new file mode 100644
index 0000000000..5a555567d0
--- /dev/null
+++ b/include/configs/pengwyn.h
@@ -0,0 +1,208 @@
+/*
+ * pengwyn.h
+ *
+ * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
+ *
+ * based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_PENGWYN_H
+#define __CONFIG_PENGWYN_H
+
+#define CONFIG_NAND
+#define CONFIG_SERIAL1
+#define CONFIG_CONS_INDEX		1
+
+#include <configs/ti_am335x_common.h>
+
+/* Clock Defines */
+#define V_OSCK				24000000
+#define V_SCLK				V_OSCK
+
+/* set env size */
+#define CONFIG_ENV_SIZE			0x4000
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x80200000\0" \
+	"fdtaddr=0x80F80000\0" \
+	"bootpart=0:2\0" \
+	"bootdir=/boot\0" \
+	"bootfile=zImage\0" \
+	"fdtfile=am335x-pengwyn.dtb\0" \
+	"console=ttyO0,115200n8\0" \
+	"optargs=\0" \
+	"mmcdev=0\0" \
+	"mmcroot=/dev/mmcblk0p2 ro\0" \
+	"mmcrootfstype=ext4 rootwait\0" \
+	"rootpath=/export/rootfs\0" \
+	"nfsopts=nolock\0" \
+	"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
+		"::off\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+	"netargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=/dev/nfs " \
+		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
+		"ip=dhcp\0" \
+	"bootenv=uEnv.txt\0" \
+	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+	"importbootenv=echo Importing environment from mmc ...; " \
+		"env import -t $loadaddr $filesize\0" \
+	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+	"mmcloados=run mmcargs; " \
+		"bootz ${loadaddr} - ${fdtaddr};\0" \
+	"mmcboot=mmc dev ${mmcdev}; " \
+		"if mmc rescan; then " \
+			"echo SD/MMC found on device ${mmcdev};" \
+			"if run loadbootenv; then " \
+				"echo Loaded environment from ${bootenv};" \
+				"run importbootenv;" \
+			"fi;" \
+			"if test -n $uenvcmd; then " \
+				"echo Running uenvcmd ...;" \
+				"run uenvcmd;" \
+			"fi;" \
+			"if run loadimage; then " \
+				"run loadfdt;" \
+				"run mmcloados;" \
+			"fi;" \
+		"fi;\0" \
+	"netboot=echo Booting from network ...; " \
+		"setenv autoload no; " \
+		"dhcp; " \
+		"tftp ${loadaddr} ${bootfile}; " \
+		"tftp ${fdtaddr} ${fdtfile}; " \
+		"run netargs; " \
+		"bootz ${loadaddr} - ${fdtaddr}\0" \
+	"mtdids=" MTDIDS_DEFAULT "\0" \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"nandargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
+	"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
+	"nandrootfstype=ubifs rootwait=1\0" \
+	"nandboot=echo Booting from nand ...; " \
+		"run nandargs; " \
+		"nand read ${fdtaddr} u-boot-spl-os; " \
+		"nand read ${loadaddr} kernel; " \
+		"bootz ${loadaddr} - ${fdtaddr}\0"
+#endif
+
+#define CONFIG_BOOTCOMMAND \
+	"run mmcboot;" \
+	"run nandboot;"
+
+/* NS16550 Configuration: primary UART via FDTI */
+#define CONFIG_SYS_NS16550_COM1		0x44e09000
+#define CONFIG_BAUDRATE			115200
+
+/* I2C Configuration */
+#define	CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_CMD_EEPROM
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+
+/* SPL */
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_YMODEM_SUPPORT
+
+/* General network SPL */
+#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
+
+/* NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_ELM
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
+					 CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
+					 10, 11, 12, 13, 14, 15, 16, 17, \
+					 18, 19, 20, 21, 22, 23, 24, 25, \
+					 26, 27, 28, 29, 30, 31, 32, 33, \
+					 34, 35, 36, 37, 38, 39, 40, 41, \
+					 42, 43, 44, 45, 46, 47, 48, 49, \
+					 50, 51, 52, 53, 54, 55, 56, 57, }
+
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	14
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+
+#define GPMC_NAND_ECC_LP_x8_LAYOUT	1
+#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:128k(SPL)," \
+					"128k(SPL.backup1)," \
+					"128k(SPL.backup2)," \
+					"128k(SPL.backup3),1792k(u-boot)," \
+					"128k(u-boot-spl-os)," \
+					"128k(u-boot-env),5m(kernel),-(rootfs)"
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
+#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
+
+/*
+ * USB configuration.  We enable MUSB support, both for host and for
+ * gadget.  We set USB0 as peripheral and USB1 as host, based on the
+ * board schematic and physical port wired to each.  Then for host we
+ * add mass storage support.
+ */
+#define CONFIG_USB_MUSB_DSPS
+#define CONFIG_ARCH_MISC_INIT
+#define CONFIG_MUSB_GADGET
+#define CONFIG_MUSB_PIO_ONLY
+#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW	2
+#define CONFIG_MUSB_HOST
+#define CONFIG_AM335X_USB0
+#define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
+#define CONFIG_AM335X_USB1
+#define CONFIG_AM335X_USB1_MODE MUSB_HOST
+
+#if defined(CONFIG_MUSB_HOST)
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#endif
+
+#if defined(CONFIG_SPL_BUILD)
+/* disable host part of MUSB in SPL */
+#undef CONFIG_MUSB_HOST
+/* Disable CPSW SPL support so we fit within the 101KiB limit. */
+#undef CONFIG_SPL_ETH_SUPPORT
+#endif
+
+/* Network */
+#define CONFIG_CMD_MII
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ADDR		1
+#define CONFIG_PHY_RESET	1
+#define CONFIG_PHY_NATSEMI
+
+/* CPSW support */
+#define CONFIG_SPL_ETH_SUPPORT
+
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"
+
+#endif	/* ! __CONFIG_PENGWYN_H */
diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index 976ceaa9c1..6306d61bb2 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi_b.h
@@ -95,12 +95,25 @@
 #define CONFIG_SYS_LOAD_ADDR		0x1000000
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_PREBOOT \
+	"if load mmc 0:1 ${loadaddr} /uEnv.txt; then " \
+		"env import -t ${loadaddr} ${filesize}; " \
+	"fi"
+
+#define ENV_DEVICE_SETTINGS \
+	"stdin=serial,lcd\0" \
+	"stdout=serial,lcd\0" \
+	"stderr=serial,lcd\0"
+
 /*
  * Memory layout for where various images get loaded by boot scripts:
  *
  * scriptaddr can be pretty much anywhere that doesn't conflict with something
  *   else. Put it low in memory to avoid conflicts.
  *
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ *   something else. Put it low in memory to avoid conflicts.
+ *
  * kernel_addr_r must be within the first 128M of RAM in order for the
  *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
  *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
@@ -116,68 +129,112 @@
  * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
  *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
  */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"stdin=serial\0" \
-	"stderr=serial,lcd\0" \
-	"stdout=serial,lcd\0" \
+#define ENV_MEM_LAYOUT_SETTINGS \
 	"scriptaddr=0x00000000\0" \
+	"pxefile_addr_r=0x00100000\0" \
 	"kernel_addr_r=0x01000000\0" \
 	"fdt_addr_r=0x02000000\0" \
 	"fdtfile=bcm2835-rpi-b.dtb\0" \
 	"ramdisk_addr_r=0x02100000\0" \
-	"boot_targets=mmc0\0" \
-	\
-	"script_boot=" \
-		"if fatload ${devtype} ${devnum}:1 " \
-					"${scriptaddr} boot.scr.uimg; then " \
-			"source ${scriptaddr}; " \
-		"fi;\0" \
-	\
+
+#define BOOTCMDS_MMC \
 	"mmc_boot=" \
 		"setenv devtype mmc; " \
 		"if mmc dev ${devnum}; then " \
-			"run script_boot; " \
+			"run scan_boot; " \
 		"fi\0" \
+	"bootcmd_mmc0=setenv devnum 0; run mmc_boot;\0"
+#define BOOT_TARGETS_MMC "mmc0"
+
+#define BOOTCMDS_COMMON \
+	"rootpart=1\0" \
+	\
+	"do_script_boot="                                                 \
+		"load ${devtype} ${devnum}:${rootpart} "                  \
+			"${scriptaddr} ${prefix}${script}; "              \
+		"source ${scriptaddr}\0"                                  \
+	\
+	"script_boot="                                                    \
+		"for script in ${boot_scripts}; do "                      \
+			"if test -e ${devtype} ${devnum}:${rootpart} "    \
+					"${prefix}${script}; then "       \
+				"echo Found ${prefix}${script}; "         \
+				"run do_script_boot; "                    \
+				"echo SCRIPT FAILED: continuing...; "     \
+			"fi; "                                            \
+		"done\0"                                                  \
+	\
+	"do_sysboot_boot="                                                \
+		"sysboot ${devtype} ${devnum}:${rootpart} any "           \
+			"${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \
+	\
+	"sysboot_boot="                                                   \
+		"if test -e ${devtype} ${devnum}:${rootpart} "            \
+				"${prefix}extlinux/extlinux.conf; then "  \
+			"echo Found ${prefix}extlinux/extlinux.conf; "    \
+			"run do_sysboot_boot; "                           \
+			"echo SCRIPT FAILED: continuing...; "             \
+		"fi\0"                                                    \
+	\
+	"scan_boot="                                                      \
+		"echo Scanning ${devtype} ${devnum}...; "                 \
+		"for prefix in ${boot_prefixes}; do "                     \
+			"run sysboot_boot; "                              \
+			"run script_boot; "                               \
+		"done\0"                                                  \
+	\
+	"boot_targets=" \
+		BOOT_TARGETS_MMC " " \
+		"\0" \
+	\
+	"boot_prefixes=/\0" \
+	\
+	"boot_scripts=boot.scr.uimg\0" \
 	\
-	"bootcmd_mmc0=setenv devnum 0; run mmc_boot\0" \
+	BOOTCMDS_MMC
 
 #define CONFIG_BOOTCOMMAND \
 	"for target in ${boot_targets}; do run bootcmd_${target}; done"
 
-#define CONFIG_BOOTDELAY		2
+#define CONFIG_BOOTCOMMAND \
+	"for target in ${boot_targets}; do run bootcmd_${target}; done"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	ENV_DEVICE_SETTINGS \
+	ENV_MEM_LAYOUT_SETTINGS \
+	BOOTCMDS_COMMON
+
+#define CONFIG_BOOTDELAY 2
 
 /* Shell */
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_MAXARGS		8
 #define CONFIG_SYS_PROMPT		"U-Boot> "
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_COMMAND_HISTORY
-#define CONFIG_AUTO_COMPLETE
 
 /* Commands */
 #include <config_cmd_default.h>
-#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_GPIO
 #define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
 #define CONFIG_PARTITION_UUIDS
 #define CONFIG_CMD_PART
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT
-/* Some things don't make sense on this HW or yet */
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SAVEENV
 
-/* Device tree support for bootm/bootz */
-#define CONFIG_OF_LIBFDT
+/* Device tree support */
 #define CONFIG_OF_BOARD_SETUP
 /* ATAGs support for bootm/bootz */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_INITRD_TAG
 
+#include <config_distro_defaults.h>
+
+/* Some things don't make sense on this HW or yet */
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SAVEENV
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
+
 #endif
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 9abfe82902..9c04c23ab7 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -83,6 +83,13 @@
 #define CONFIG_OMAP_HSMMC
 #define CONFIG_DOS_PARTITION
 
+/* GPIO banks */
+#define CONFIG_OMAP3_GPIO_2		/* GPIO32 ..63  is in GPIO bank 2 */
+#define CONFIG_OMAP3_GPIO_3		/* GPIO64 ..95  is in GPIO bank 3 */
+#define CONFIG_OMAP3_GPIO_4		/* GPIO96 ..127 is in GPIO bank 4 */
+#define CONFIG_OMAP3_GPIO_5		/* GPIO128..159 is in GPIO bank 5 */
+#define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
+
 /* commands to include */
 #include <config_cmd_default.h>
 
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 91f97dd061..7e9ca01cd5 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -13,7 +13,6 @@
 #define __CONFIG_TI_AM335X_COMMON_H__
 
 #define CONFIG_AM33XX
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_CACHELINE_SIZE       64
 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index 2f0e4c0f67..bcb5eabd75 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -163,4 +163,10 @@
 #define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
 #endif
 
+#ifdef CONFIG_SPL_BUILD
+/* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */
+#undef CONFIG_SYS_I2C
+#undef CONFIG_SYS_I2C_OMAP24XX
+#endif
+
 #endif /* __CONFIG_TI_OMAP4_COMMON_H */
diff --git a/include/configs/tseries.h b/include/configs/tseries.h
new file mode 100644
index 0000000000..8fb87ac441
--- /dev/null
+++ b/include/configs/tseries.h
@@ -0,0 +1,265 @@
+/*
+ * tseries.h
+ *
+ * specific parts for B&R T-Series Motherboard
+ *
+ * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> -
+ * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+ *
+ * SPDX-License-Identifier:        GPL-2.0+
+ */
+
+#ifndef __CONFIG_TSERIES_H__
+#define __CONFIG_TSERIES_H__
+
+#include <configs/bur_am335x_common.h>
+/* ------------------------------------------------------------------------- */
+/* Clock Defines */
+#define V_OSCK				26000000  /* Clock output from T2 */
+#define V_SCLK				(V_OSCK)
+
+#define CONFIG_POWER_TPS65217
+
+/* Support both device trees and ATAGs. */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMD_BOOTZ
+/*#define CONFIG_MACH_TYPE		3589*/
+#define CONFIG_MACH_TYPE		0xFFFFFFFF /* TODO: check with kernel*/
+
+/* MMC/SD IP block */
+#if defined(CONFIG_EMMC_BOOT)
+ #define CONFIG_MMC
+ #define CONFIG_GENERIC_MMC
+ #define CONFIG_OMAP_HSMMC
+ #define CONFIG_CMD_MMC
+ #define CONFIG_SUPPORT_EMMC_BOOT
+/* RAW SD card / eMMC locations. */
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /*addr. 0x60000 */
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x200 /* 256 KB */
+ #define CONFIG_SPL_MMC_SUPPORT
+#endif /* CONFIG_EMMC_BOOT */
+
+/*
+ * When we have SPI or NAND flash we expect to be making use of mtdparts,
+ * both for ease of use in U-Boot and for passing information on to
+ * the Linux kernel.
+ */
+#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NAND)
+#define CONFIG_MTD_DEVICE		/* Required for mtdparts */
+#define CONFIG_CMD_MTDPARTS
+#endif /* CONFIG_SPI_BOOT, ... */
+
+#undef CONFIG_SPL_OS_BOOT
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_SYS_SPL_ARGS_ADDR		0x80F80000
+
+/* RAW SD card / eMMC */
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x900	/* address 0x120000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x80	/* address 0x10000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */
+
+/* NAND */
+#ifdef CONFIG_NAND
+#define CONFIG_CMD_SPL_NAND_OFS			0x080000 /* end of u-boot */
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS		0x140000
+#define CONFIG_CMD_SPL_WRITE_SIZE		0x2000
+#endif /* CONFIG_NAND */
+#endif /* CONFIG_SPL_OS_BOOT */
+
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_AM33XX_BCH	/* OMAP4 and later ELM support */
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+#endif /* CONFIG_NAND */
+
+/* Always 128 KiB env size */
+#define CONFIG_ENV_SIZE			(128 << 10)
+
+#ifdef CONFIG_NAND
+#define NANDARGS \
+	"mtdids=" MTDIDS_DEFAULT "\0" \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"nandargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
+	"nandroot=ubi0:rootfs rw ubi.mtd=8,2048\0" \
+	"nandrootfstype=ubifs rootwait=1\0" \
+	"nandimgsize=0x500000\0" \
+	"nandboot=echo Booting from nand ...; " \
+		"run nandargs; " \
+		"nand read ${loadaddr} kernel ${nandimgsize}; " \
+		"bootz ${loadaddr}\0"
+#else
+#define NANDARGS ""
+#endif /* CONFIG_NAND */
+
+#ifdef CONFIG_MMC
+#define MMCARGS \
+	"silent=1\0"
+#else
+#define MMCARGS ""
+#endif /* CONFIG_MMC */
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"autoload=0\0" \
+	"loadaddr=0x80200000\0" \
+	"bootfile=zImage\0" \
+	"console=ttyO0,115200n8\0" \
+	"optargs=\0" \
+	"rootpath=/tftpboot/tseries/rootfs-small\0" \
+	"nfsopts=nolock\0" \
+	"netargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=/dev/nfs " \
+		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
+		"ip=dhcp\0" \
+	"netboot=echo Booting from network ...; " \
+		"setenv autoload no; " \
+		"dhcp; " \
+		"tftp ${loadaddr} ${bootfile}; " \
+		"run netargs; " \
+		"bootm ${loadaddr}\0" \
+	"usbupdate=echo Updating UBOOT from USB-Stick ...; " \
+		"usb start; " \
+		"fatload usb 0 0x80000000 updateubootusb.img; " \
+		"source;\0" \
+	"netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
+		"setenv autoload 0; " \
+		"dhcp;" \
+		"tftp 0x80000000 updateUBOOT.img;" \
+		"source;\0" \
+	NANDARGS \
+	MMCARGS
+#endif /* !CONFIG_SPL_BUILD*/
+
+#define CONFIG_BOOTCOMMAND \
+	"run mmcboot1;"
+#define CONFIG_BOOTDELAY		1 /* TODO: für release auf 0 setzen */
+
+#ifdef CONFIG_NAND
+/*
+ * GPMC  block.  We support 1 device and the physical address to
+ * access CS0 at is 0x8000000.
+ */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x8000000
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_CMD_NAND
+/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
+#define CONFIG_NAND_OMAP_ELM
+#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
+#define GPMC_NAND_ECC_LP_x16_LAYOUT	1
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
+					CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9, \
+					10, 11, 12, 13, 14, 15, 16, 17, \
+					18, 19, 20, 21, 22, 23, 24, 25, \
+					26, 27, 28, 29, 30, 31, 32, 33, \
+					34, 35, 36, 37, 38, 39, 40, 41, \
+					42, 43, 44, 45, 46, 47, 48, 49, \
+					50, 51, 52, 53, 54, 55, 56, 57, }
+
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	14
+
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+
+#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:" \
+					"128k(SPL)," \
+					"128k(SPL.backup1)," \
+					"128k(SPL.backup2)," \
+					"128k(SPL.backup3)," \
+					"512k(u-boot)," \
+					"128k(u-boot-spl-os)," \
+					"128k(u-boot-env)," \
+					"5m(kernel),"\
+					"-(rootfs)"
+#endif /* CONFIG_NAND */
+
+/* USB configuration */
+#define CONFIG_USB_MUSB_DSPS
+#define CONFIG_ARCH_MISC_INIT
+#define CONFIG_MUSB_PIO_ONLY
+#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
+/* attention! not only for gadget, enables also highspeed in hostmode */
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_MUSB_HOST
+#define CONFIG_AM335X_USB0
+#define CONFIG_AM335X_USB0_MODE	MUSB_HOST
+#define CONFIG_AM335X_USB1
+#define CONFIG_AM335X_USB1_MODE MUSB_HOST
+
+#ifdef CONFIG_MUSB_HOST
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#endif /* CONFIG_MUSB_HOST */
+
+#if defined(CONFIG_SPI_BOOT)
+/* McSPI IP block */
+#define CONFIG_SPI
+#define CONFIG_OMAP3_SPI
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SF_DEFAULT_SPEED		24000000
+
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS		0
+#define CONFIG_SPL_SPI_CS		0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
+#undef CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_ENV_SECT_SIZE		(4 << 10) /* 4 KB sectors */
+#define CONFIG_ENV_OFFSET		(768 << 10) /* 768 KiB in */
+#define CONFIG_ENV_OFFSET_REDUND	(896 << 10) /* 896 KiB in */
+
+#elif defined(CONFIG_EMMC_BOOT)
+#undef CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		1
+#define CONFIG_SYS_MMC_ENV_PART		2
+#define CONFIG_ENV_OFFSET		0x40000	/* TODO: Adresse definieren */
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+
+#elif defined(CONFIG_NAND)
+#undef CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		0x120000 /* TODO: Adresse definieren */
+#define CONFIG_SYS_ENV_SECT_SIZE	CONFIG_ENV_SIZE
+#else
+#error "no storage for Environment defined!"
+#endif
+/*
+ * Common filesystems support.  When we have removable storage we
+ * enabled a number of useful commands and support.
+ */
+#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
+#define CONFIG_CMD_FS_GENERIC
+#endif /* CONFIG_MMC, ... */
+
+#endif	/* ! __CONFIG_TSERIES_H__ */
diff --git a/lib/Makefile b/lib/Makefile
index 8c483c99a3..dedb97b0ed 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -65,6 +65,3 @@ obj-y += vsprintf.o
 obj-$(CONFIG_RANDOM_MACADDR) += rand.o
 obj-$(CONFIG_BOOTP_RANDOM_DELAY) += rand.o
 obj-$(CONFIG_CMD_LINK_LOCAL) += rand.o
-
-# SEE README.arm-unaligned-accesses
-CFLAGS_bzlib.o := $(PLATFORM_NO_UNALIGNED)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 88c5bc7735..df0820c1a1 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -3331,6 +3331,11 @@ sub process {
 			WARN("PREFER_PACKED",
 			     "__packed is preferred over __attribute__((packed))\n" . $herecurr);
 		}
+# Check for new packed members, warn to use care
+		if ($line =~ /\b(__attribute__\s*\(\s*\(.*\bpacked|__packed)\b/) {
+			WARN("NEW_PACKED",
+			     "Adding new packed members is to be done with care\n" . $herecurr);
+		}
 
 # Check for __attribute__ aligned, prefer __aligned
 		if ($line =~ /\b__attribute__\s*\(\s*\(.*aligned/) {
author	Tom Rini <trini@ti.com>	2014-02-26 16:49:58 -0500
committer	Tom Rini <trini@ti.com>	2014-02-26 16:49:58 -0500
commit	eeb72e67619b98d2502fe634a3a5d9953de92ad0 (patch)
tree	edea4b04062ec956158c163b13c9a31fcfdccde8
parent	715b56fe2b47e073e6f2425e0cedba0e92a4014d (diff)
parent	1551df35f296f0a8df32f4f2054254f46e8be252 (diff)
download	u-boot-eeb72e67619b98d2502fe634a3a5d9953de92ad0.tar.gz