mtd: remove drivers/mtd/mw_eeprom.c

drivers/mtd/mw_eeprom.c contains code that never worked. mw_eeprom_write()
and mw_eeprom_read() have incorrect loop conditions:

	while (len <= 2) {

CONFIG_MW_EEPROM is not set anywhere. So let's simply drop the module.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

2 files changed, 0 insertions, 239 deletions

diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 318788c5e2..6d77ebfaa5 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -11,7 +11,6 @@ mtd-$(CONFIG_ALTERA_QSPI) += altera_qspi.o
 mtd-$(CONFIG_FLASH_CFI_DRIVER) += cfi_flash.o
 mtd-$(CONFIG_FLASH_CFI_MTD) += cfi_mtd.o
 mtd-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
-mtd-$(CONFIG_MW_EEPROM) += mw_eeprom.o
 mtd-$(CONFIG_FLASH_PIC32) += pic32_flash.o
 mtd-$(CONFIG_ST_SMI) += st_smi.o
 mtd-$(CONFIG_STM32_FLASH) += stm32_flash.o
diff --git a/drivers/mtd/mw_eeprom.c b/drivers/mtd/mw_eeprom.c
deleted file mode 100644
index 9837733bee..0000000000
--- a/drivers/mtd/mw_eeprom.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/* Three-wire (MicroWire) serial eeprom driver (for 93C46 and compatibles) */
-
-#include <common.h>
-#include <eeprom.h>
-#include <asm/ic/ssi.h>
-#include <linux/delay.h>
-
-/*
- * Serial EEPROM opcodes, including start bit
- */
-#define EEP_OPC_ERASE	0x7  /* 3-bit opcode */
-#define EEP_OPC_WRITE	0x5  /* 3-bit opcode */
-#define EEP_OPC_READ	        0x6  /* 3-bit opcode */
-
-#define EEP_OPC_ERASE_ALL	0x12 /* 5-bit opcode */
-#define EEP_OPC_ERASE_EN	0x13 /* 5-bit opcode */
-#define EEP_OPC_WRITE_ALL	0x11 /* 5-bit opcode */
-#define EEP_OPC_ERASE_DIS	0x10 /* 5-bit opcode */
-
-static int addrlen;
-
-static void mw_eeprom_select(int dev)
-{
-	ssi_set_interface(2048, 0, 0, 0);
-	ssi_chip_select(0);
-	udelay(1);
-	ssi_chip_select(dev);
-	udelay(1);
-}
-
-static int mw_eeprom_size(int dev)
-{
-	int x;
-	u16 res;
-
-	mw_eeprom_select(dev);
-	ssi_tx_byte(EEP_OPC_READ);
-
-	res = ssi_txrx_byte(0) << 8;
-	res |= ssi_rx_byte();
-	for (x = 0; x < 16; x++) {
-		if (! (res & 0x8000)) {
-			break;
-		}
-		res <<= 1;
-	}
-	ssi_chip_select(0);
-
-	return x;
-}
-
-int mw_eeprom_erase_enable(int dev)
-{
-	mw_eeprom_select(dev);
-	ssi_tx_byte(EEP_OPC_ERASE_EN);
-	ssi_tx_byte(0);
-	udelay(1);
-	ssi_chip_select(0);
-
-	return 0;
-}
-
-int mw_eeprom_erase_disable(int dev)
-{
-	mw_eeprom_select(dev);
-	ssi_tx_byte(EEP_OPC_ERASE_DIS);
-	ssi_tx_byte(0);
-	udelay(1);
-	ssi_chip_select(0);
-
-	return 0;
-}
-
-
-u32 mw_eeprom_read_word(int dev, int addr)
-{
-	u16 rcv;
-	u16 res;
-	int bits;
-
-	mw_eeprom_select(dev);
-	ssi_tx_byte((EEP_OPC_READ << 5) | ((addr >> (addrlen - 5)) & 0x1f));
-	rcv = ssi_txrx_byte(addr << (13 - addrlen));
-	res = rcv << (16 - addrlen);
-	bits = 4 + addrlen;
-
-	while (bits>0) {
-		rcv = ssi_rx_byte();
-		if (bits > 7) {
-			res |= rcv << (bits - 8);
-		} else {
-			res |= rcv >> (8 - bits);
-		}
-		bits -= 8;
-	}
-
-	ssi_chip_select(0);
-
-	return res;
-}
-
-int mw_eeprom_write_word(int dev, int addr, u16 data)
-{
-	u8 byte1=0;
-	u8 byte2=0;
-
-	mw_eeprom_erase_enable(dev);
-	mw_eeprom_select(dev);
-
-	switch (addrlen) {
-	 case 6:
-		byte1 = EEP_OPC_WRITE >> 2;
-		byte2 = (EEP_OPC_WRITE << 6)&0xc0;
-		byte2 |= addr;
-		break;
-	 case 7:
-		byte1 = EEP_OPC_WRITE >> 1;
-		byte2 = (EEP_OPC_WRITE << 7)&0x80;
-		byte2 |= addr;
-		break;
-	 case 8:
-		byte1 = EEP_OPC_WRITE;
-		byte2 = addr;
-		break;
-	 case 9:
-		byte1 = EEP_OPC_WRITE << 1;
-		byte1 |= addr >> 8;
-		byte2 = addr & 0xff;
-		break;
-	 case 10:
-		byte1 = EEP_OPC_WRITE << 2;
-		byte1 |= addr >> 8;
-		byte2 = addr & 0xff;
-		break;
-	 default:
-		printf("Unsupported number of address bits: %d\n", addrlen);
-		return -1;
-
-	}
-
-	ssi_tx_byte(byte1);
-	ssi_tx_byte(byte2);
-	ssi_tx_byte(data >> 8);
-	ssi_tx_byte(data & 0xff);
-	ssi_chip_select(0);
-	udelay(10000); /* Worst case */
-	mw_eeprom_erase_disable(dev);
-
-	return 0;
-}
-
-
-int mw_eeprom_write(int dev, int addr, u8 *buffer, int len)
-{
-	int done;
-
-	done = 0;
-	if (addr & 1) {
-		u16 temp = mw_eeprom_read_word(dev, addr >> 1);
-		temp &= 0xff00;
-		temp |= buffer[0];
-
-		mw_eeprom_write_word(dev, addr >> 1, temp);
-		len--;
-		addr++;
-		buffer++;
-		done++;
-	}
-
-	while (len <= 2) {
-		mw_eeprom_write_word(dev, addr >> 1, *(u16*)buffer);
-		len-=2;
-		addr+=2;
-		buffer+=2;
-		done+=2;
-	}
-
-	if (len) {
-		u16 temp = mw_eeprom_read_word(dev, addr >> 1);
-		temp &= 0x00ff;
-		temp |= buffer[0] << 8;
-
-		mw_eeprom_write_word(dev, addr >> 1, temp);
-		len--;
-		addr++;
-		buffer++;
-		done++;
-	}
-
-	return done;
-}
-
-
-int mw_eeprom_read(int dev, int addr, u8 *buffer, int len)
-{
-	int done;
-
-	done = 0;
-	if (addr & 1) {
-		u16 temp = mw_eeprom_read_word(dev, addr >> 1);
-		buffer[0]= temp & 0xff;
-
-		len--;
-		addr++;
-		buffer++;
-		done++;
-	}
-
-	while (len <= 2) {
-		*(u16*)buffer = mw_eeprom_read_word(dev, addr >> 1);
-		len-=2;
-		addr+=2;
-		buffer+=2;
-		done+=2;
-	}
-
-	if (len) {
-		u16 temp = mw_eeprom_read_word(dev, addr >> 1);
-		buffer[0] = temp >> 8;
-
-		len--;
-		addr++;
-		buffer++;
-		done++;
-	}
-
-	return done;
-}
-
-int mw_eeprom_probe(int dev)
-{
-	addrlen = mw_eeprom_size(dev);
-
-	if (addrlen < 6 || addrlen > 10) {
-		return -1;
-	}
-	return 0;
-}