Merge branch '2021-01-27-assorted-fixes-and-improvements'WIP/28Jan2021

- A wide variety of fixes throughout the tree.

34 files changed, 915 insertions, 128 deletions

diff --git a/Makefile b/Makefile
index cef149dec9..72be573ebc 100644
--- a/Makefile
+++ b/Makefile
@@ -885,7 +885,7 @@ cmd_static_rela = \
 	tools/relocate-rela $(3) $(4) $$start $$end
 else
 quiet_cmd_static_rela =
-cmd_static_rela = true
+cmd_static_rela =
 endif
 
 # Always append INPUTS so that arch config.mk's can add custom ones
@@ -1312,7 +1312,11 @@ endif
 shell_cmd = { $(call echo-cmd,$(1)) $(cmd_$(1)); }
 
 quiet_cmd_objcopy_uboot = OBJCOPY $@
+ifdef cmd_static_rela
 cmd_objcopy_uboot = $(cmd_objcopy) && $(call shell_cmd,static_rela,$<,$@,$(CONFIG_SYS_TEXT_BASE)) || { rm -f $@; false; }
+else
+cmd_objcopy_uboot = $(cmd_objcopy)
+endif
 
 u-boot-nodtb.bin: u-boot FORCE
 	$(call if_changed,objcopy_uboot)
diff --git a/README b/README
index 89606c8add..f7f9aa5619 100644
--- a/README
+++ b/README
@@ -2770,13 +2770,6 @@ Low Level (hardware related) configuration options:
   CONFIG_SYS_OR3_PRELIM, CONFIG_SYS_BR3_PRELIM:
 		Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM)
 
-- CONFIG_PCI_ENUM_ONLY
-		Only scan through and get the devices on the buses.
-		Don't do any setup work, presumably because someone or
-		something has already done it, and we don't need to do it
-		a second time.	Useful for platforms that are pre-booted
-		by coreboot or similar.
-
 - CONFIG_PCI_INDIRECT_BRIDGE:
 		Enable support for indirect PCI bridges.
 
diff --git a/cmd/sleep.c b/cmd/sleep.c
index f0c78a8efb..1fff400c79 100644
--- a/cmd/sleep.c
+++ b/cmd/sleep.c
@@ -40,7 +40,7 @@ static int do_sleep(struct cmd_tbl *cmdtp, int flag, int argc,
 
 	while (get_timer(start) < delay) {
 		if (ctrlc())
-			return (-1);
+			return CMD_RET_FAILURE;
 
 		udelay(100);
 	}
diff --git a/common/Kconfig b/common/Kconfig
index d8982ba377..45535e3501 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -697,6 +697,16 @@ config BLOBLIST_ADDR
 	  Sets the address of the bloblist, set up by the first part of U-Boot
 	  which runs. Subsequent U-Boot stages typically use the same address.
 
+config BLOBLIST_SIZE_RELOC
+	hex "Size of bloblist after relocation"
+	depends on BLOBLIST
+	default BLOBLIST_SIZE
+	help
+	  Sets the size of the bloblist in bytes after relocation. Since U-Boot
+	  has a lot more memory available then, it is possible to use a larger
+	  size than the one set up by SPL. This bloblist is set up during the
+	  relocation process.
+
 endmenu
 
 source "common/spl/Kconfig"
diff --git a/common/autoboot.c b/common/autoboot.c
index ddb6246be3..b025fd99a0 100644
--- a/common/autoboot.c
+++ b/common/autoboot.c
@@ -164,9 +164,9 @@ static int passwd_abort_key(uint64_t etime)
 	};
 
 	char presskey[MAX_DELAY_STOP_STR];
-	u_int presskey_len = 0;
-	u_int presskey_max = 0;
-	u_int i;
+	int presskey_len = 0;
+	int presskey_max = 0;
+	int i;
 
 #  ifdef CONFIG_AUTOBOOT_DELAY_STR
 	if (delaykey[0].str == NULL)
diff --git a/common/bloblist.c b/common/bloblist.c
index 33b5862380..0e6448becb 100644
--- a/common/bloblist.c
+++ b/common/bloblist.c
@@ -33,6 +33,12 @@ static const char *const tag_name[] = {
 	[BLOBLISTT_SPL_HANDOFF]		= "SPL hand-off",
 	[BLOBLISTT_VBOOT_CTX]		= "Chrome OS vboot context",
 	[BLOBLISTT_VBOOT_HANDOFF]	= "Chrome OS vboot hand-off",
+	[BLOBLISTT_ACPI_GNVS]		= "ACPI GNVS",
+	[BLOBLISTT_INTEL_VBT]		= "Intel Video-BIOS table",
+	[BLOBLISTT_TPM2_TCG_LOG]	= "TPM v2 log space",
+	[BLOBLISTT_TCPA_LOG]		= "TPM log space",
+	[BLOBLISTT_ACPI_TABLES]		= "ACPI tables for x86",
+	[BLOBLISTT_SMBIOS_TABLES]	= "SMBIOS tables for x86",
 };
 
 const char *bloblist_tag_name(enum bloblist_tag_t tag)
@@ -317,6 +323,15 @@ void bloblist_show_list(void)
 	}
 }
 
+void bloblist_reloc(void *to, uint to_size, void *from, uint from_size)
+{
+	struct bloblist_hdr *hdr;
+
+	memcpy(to, from, from_size);
+	hdr = to;
+	hdr->size = to_size;
+}
+
 int bloblist_init(void)
 {
 	bool expected;
@@ -327,6 +342,8 @@ int bloblist_init(void)
 	 * that runs
 	 */
 	expected = !u_boot_first_phase();
+	if (spl_prev_phase() == PHASE_TPL && !IS_ENABLED(CONFIG_TPL_BLOBLIST))
+		expected = false;
 	if (expected)
 		ret = bloblist_check(CONFIG_BLOBLIST_ADDR,
 				     CONFIG_BLOBLIST_SIZE);
diff --git a/common/board_f.c b/common/board_f.c
index ae3001bed1..4327a43a33 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -568,9 +568,10 @@ static int reserve_bloblist(void)
 {
 #ifdef CONFIG_BLOBLIST
 	/* Align to a 4KB boundary for easier reading of addresses */
-	gd->start_addr_sp = ALIGN_DOWN(gd->start_addr_sp - CONFIG_BLOBLIST_SIZE,
-				       0x1000);
-	gd->new_bloblist = map_sysmem(gd->start_addr_sp, CONFIG_BLOBLIST_SIZE);
+	gd->start_addr_sp = ALIGN_DOWN(gd->start_addr_sp -
+				       CONFIG_BLOBLIST_SIZE_RELOC, 0x1000);
+	gd->new_bloblist = map_sysmem(gd->start_addr_sp,
+				      CONFIG_BLOBLIST_SIZE_RELOC);
 #endif
 
 	return 0;
@@ -658,7 +659,8 @@ static int reloc_bloblist(void)
 
 		debug("Copying bloblist from %p to %p, size %x\n",
 		      gd->bloblist, gd->new_bloblist, size);
-		memcpy(gd->new_bloblist, gd->bloblist, size);
+		bloblist_reloc(gd->new_bloblist, CONFIG_BLOBLIST_SIZE_RELOC,
+			       gd->bloblist, size);
 		gd->bloblist = gd->new_bloblist;
 	}
 #endif
diff --git a/common/image-fit-sig.c b/common/image-fit-sig.c
index d39741e905..31cc580941 100644
--- a/common/image-fit-sig.c
+++ b/common/image-fit-sig.c
@@ -360,7 +360,7 @@ static int fit_config_verify_sig(const void *fit, int conf_noffset,
 				 const void *sig_blob, int sig_offset)
 {
 	int noffset;
-	char *err_msg = "";
+	char *err_msg = "No 'signature' subnode found";
 	int verified = 0;
 	int ret;
 
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index bdc229f930..774541c02b 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -186,7 +186,7 @@ config SPL_BOOTROM_SUPPORT
 
 config SPL_BOOTCOUNT_LIMIT
 	bool "Support bootcount in SPL"
-	depends on SPL_ENV_SUPPORT
+	depends on SPL_ENV_SUPPORT && !TPL_BOOTCOUNT_LIMIT
 	help
 	  On some boards, which use 'falcon' mode, it is necessary to check
 	  and increment the number of boot attempts. Such boards do not
@@ -1382,6 +1382,13 @@ config TPL_BOARD_INIT
 	  spl_board_init() from board_init_r(). This function should be
 	  provided by the board.
 
+config TPL_BOOTCOUNT_LIMIT
+	bool "Support bootcount in TPL"
+	depends on TPL_ENV_SUPPORT
+	help
+	  If this option is enabled, the TPL will support bootcount.
+	  For example, it may be useful to choose the device to boot.
+
 config TPL_LDSCRIPT
         string "Linker script for the TPL stage"
 	depends on TPL
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 835c53deaa..8cb6f3d531 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -734,7 +734,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
 		debug("Failed to stash bootstage: err=%d\n", ret);
 #endif
 
-	debug("loaded - jumping to U-Boot...\n");
+	debug("loaded - jumping to %s...\n", spl_phase_name(spl_next_phase()));
 	spl_board_prepare_for_boot();
 	jump_to_image_no_args(&spl_image);
 }
@@ -837,7 +837,9 @@ ulong spl_relocate_stack_gd(void)
 #endif
 }
 
-#if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_SPL_BOOTCOUNT_LIMIT)
+#if defined(CONFIG_BOOTCOUNT_LIMIT) && \
+	((!defined(CONFIG_TPL_BUILD) && !defined(CONFIG_SPL_BOOTCOUNT_LIMIT)) || \
+	 (defined(CONFIG_TPL_BUILD) && !defined(CONFIG_TPL_BOOTCOUNT_LIMIT)))
 void bootcount_store(ulong a)
 {
 }
diff --git a/doc/device-tree-bindings/rtc/abracon,abx80x.txt b/doc/device-tree-bindings/rtc/abracon,abx80x.txt
new file mode 100644
index 0000000000..2405e35a1b
--- /dev/null
+++ b/doc/device-tree-bindings/rtc/abracon,abx80x.txt
@@ -0,0 +1,31 @@
+Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
+ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
+is the superset of ab180x.
+
+Required properties:
+
+ - "compatible": should one of:
+        "abracon,abx80x"
+        "abracon,ab0801"
+        "abracon,ab0803"
+        "abracon,ab0804"
+        "abracon,ab0805"
+        "abracon,ab1801"
+        "abracon,ab1803"
+        "abracon,ab1804"
+        "abracon,ab1805"
+        "microcrystal,rv1805"
+	Using "abracon,abx80x" will enable chip autodetection.
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+The abx804 and abx805 have a trickle charger that is able to charge the
+connected battery or supercap. Both the following properties have to be defined
+and valid to enable charging:
+
+ - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
+ - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
+                          resistor, the other values are in kOhm.
diff --git a/drivers/Makefile b/drivers/Makefile
index e371bc32bb..c562a719f7 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -69,6 +69,7 @@ endif
 
 ifdef CONFIG_TPL_BUILD
 
+obj-$(CONFIG_TPL_BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
 
 endif
diff --git a/drivers/mmc/pci_mmc.c b/drivers/mmc/pci_mmc.c
index b26eb034d0..fd5dd229b5 100644
--- a/drivers/mmc/pci_mmc.c
+++ b/drivers/mmc/pci_mmc.c
@@ -10,6 +10,7 @@
 #include <log.h>
 #include <malloc.h>
 #include <mapmem.h>
+#include <mmc.h>
 #include <sdhci.h>
 #include <acpi/acpigen.h>
 #include <acpi/acpi_device.h>
@@ -17,6 +18,12 @@
 #include <asm-generic/gpio.h>
 #include <dm/acpi.h>
 
+/* Type of MMC device */
+enum {
+	TYPE_SD,
+	TYPE_EMMC,
+};
+
 struct pci_mmc_plat {
 	struct mmc_config cfg;
 	struct mmc mmc;
@@ -34,8 +41,15 @@ static int pci_mmc_probe(struct udevice *dev)
 	struct pci_mmc_plat *plat = dev_get_plat(dev);
 	struct pci_mmc_priv *priv = dev_get_priv(dev);
 	struct sdhci_host *host = &priv->host;
+	struct blk_desc *desc;
 	int ret;
 
+	ret = mmc_of_parse(dev, &plat->cfg);
+	if (ret)
+		return ret;
+	desc = mmc_get_blk_desc(&plat->mmc);
+	desc->removable = !(plat->cfg.host_caps & MMC_CAP_NONREMOVABLE);
+
 	host->ioaddr = (void *)dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0,
 					      PCI_REGION_MEM);
 	host->name = dev->name;
@@ -79,6 +93,8 @@ static int pci_mmc_acpi_fill_ssdt(const struct udevice *dev,
 
 	if (!dev_has_ofnode(dev))
 		return 0;
+	if (dev_get_driver_data(dev) == TYPE_EMMC)
+		return 0;
 
 	ret = gpio_get_acpi(&priv->cd_gpio, &gpio);
 	if (ret)
@@ -122,7 +138,8 @@ struct acpi_ops pci_mmc_acpi_ops = {
 };
 
 static const struct udevice_id pci_mmc_match[] = {
-	{ .compatible = "intel,apl-sd" },
+	{ .compatible = "intel,apl-sd", .data = TYPE_SD },
+	{ .compatible = "intel,apl-emmc", .data = TYPE_EMMC },
 	{ }
 };
 
diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c
index b37dd994e5..da76148c58 100644
--- a/drivers/pci/pci_auto.c
+++ b/drivers/pci/pci_auto.c
@@ -18,10 +18,10 @@
 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE	8
 #endif
 
-void dm_pciauto_setup_device(struct udevice *dev, int bars_num,
-			     struct pci_region *mem,
-			     struct pci_region *prefetch, struct pci_region *io,
-			     bool enum_only)
+static void dm_pciauto_setup_device(struct udevice *dev, int bars_num,
+				    struct pci_region *mem,
+				    struct pci_region *prefetch,
+				    struct pci_region *io)
 {
 	u32 bar_response;
 	pci_size_t bar_size;
@@ -43,8 +43,7 @@ void dm_pciauto_setup_device(struct udevice *dev, int bars_num,
 		int ret = 0;
 
 		/* Tickle the BAR and get the response */
-		if (!enum_only)
-			dm_pci_write_config32(dev, bar, 0xffffffff);
+		dm_pci_write_config32(dev, bar, 0xffffffff);
 		dm_pci_read_config32(dev, bar, &bar_response);
 
 		/* If BAR is not implemented (or invalid) go to the next BAR */
@@ -58,8 +57,7 @@ void dm_pciauto_setup_device(struct udevice *dev, int bars_num,
 			bar_size = bar_response & PCI_BASE_ADDRESS_IO_MASK;
 			bar_size &= ~(bar_size - 1);
 
-			if (!enum_only)
-				bar_res = io;
+			bar_res = io;
 
 			debug("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ",
 			      bar_nr, (unsigned long long)bar_size);
@@ -69,10 +67,7 @@ void dm_pciauto_setup_device(struct udevice *dev, int bars_num,
 				u32 bar_response_upper;
 				u64 bar64;
 
-				if (!enum_only) {
-					dm_pci_write_config32(dev, bar + 4,
-							      0xffffffff);
-				}
+				dm_pci_write_config32(dev, bar + 4, 0xffffffff);
 				dm_pci_read_config32(dev, bar + 4,
 						     &bar_response_upper);
 
@@ -81,33 +76,29 @@ void dm_pciauto_setup_device(struct udevice *dev, int bars_num,
 
 				bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK)
 						+ 1;
-				if (!enum_only)
-					found_mem64 = 1;
+				found_mem64 = 1;
 			} else {
 				bar_size = (u32)(~(bar_response &
 						PCI_BASE_ADDRESS_MEM_MASK) + 1);
 			}
-			if (!enum_only) {
-				if (prefetch && (bar_response &
-					    PCI_BASE_ADDRESS_MEM_PREFETCH)) {
-					bar_res = prefetch;
-				} else {
-					bar_res = mem;
-				}
-			}
+
+			if (prefetch &&
+			    (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
+				bar_res = prefetch;
+			else
+				bar_res = mem;
 
 			debug("PCI Autoconfig: BAR %d, %s, size=0x%llx, ",
 			      bar_nr, bar_res == prefetch ? "Prf" : "Mem",
 			      (unsigned long long)bar_size);
 		}
 
-		if (!enum_only) {
-			ret = pciauto_region_allocate(bar_res, bar_size,
-						      &bar_value, found_mem64);
-			if (ret)
-				printf("PCI: Failed autoconfig bar %x\n", bar);
-		}
-		if (!enum_only && !ret) {
+		ret = pciauto_region_allocate(bar_res, bar_size,
+					      &bar_value, found_mem64);
+		if (ret)
+			printf("PCI: Failed autoconfig bar %x\n", bar);
+
+		if (!ret) {
 			/* Write it out and update our limit */
 			dm_pci_write_config32(dev, bar, (u32)bar_value);
 
@@ -135,28 +126,24 @@ void dm_pciauto_setup_device(struct udevice *dev, int bars_num,
 		bar_nr++;
 	}
 
-	if (!enum_only) {
-		/* Configure the expansion ROM address */
-		dm_pci_read_config8(dev, PCI_HEADER_TYPE, &header_type);
-		header_type &= 0x7f;
-		if (header_type != PCI_HEADER_TYPE_CARDBUS) {
-			rom_addr = (header_type == PCI_HEADER_TYPE_NORMAL) ?
-				PCI_ROM_ADDRESS : PCI_ROM_ADDRESS1;
-			dm_pci_write_config32(dev, rom_addr, 0xfffffffe);
-			dm_pci_read_config32(dev, rom_addr, &bar_response);
-			if (bar_response) {
-				bar_size = -(bar_response & ~1);
-				debug("PCI Autoconfig: ROM, size=%#x, ",
-				      (unsigned int)bar_size);
-				if (pciauto_region_allocate(mem, bar_size,
-							    &bar_value,
-							    false) == 0) {
-					dm_pci_write_config32(dev, rom_addr,
-							      bar_value);
-				}
-				cmdstat |= PCI_COMMAND_MEMORY;
-				debug("\n");
+	/* Configure the expansion ROM address */
+	dm_pci_read_config8(dev, PCI_HEADER_TYPE, &header_type);
+	header_type &= 0x7f;
+	if (header_type != PCI_HEADER_TYPE_CARDBUS) {
+		rom_addr = (header_type == PCI_HEADER_TYPE_NORMAL) ?
+			PCI_ROM_ADDRESS : PCI_ROM_ADDRESS1;
+		dm_pci_write_config32(dev, rom_addr, 0xfffffffe);
+		dm_pci_read_config32(dev, rom_addr, &bar_response);
+		if (bar_response) {
+			bar_size = -(bar_response & ~1);
+			debug("PCI Autoconfig: ROM, size=%#x, ",
+			      (unsigned int)bar_size);
+			if (pciauto_region_allocate(mem, bar_size, &bar_value,
+						    false) == 0) {
+				dm_pci_write_config32(dev, rom_addr, bar_value);
 			}
+			cmdstat |= PCI_COMMAND_MEMORY;
+			debug("\n");
 		}
 	}
 
@@ -319,15 +306,10 @@ int dm_pciauto_config_device(struct udevice *dev)
 	struct pci_region *pci_io;
 	unsigned int sub_bus = PCI_BUS(dm_pci_get_bdf(dev));
 	unsigned short class;
-	bool enum_only = false;
 	struct udevice *ctlr = pci_get_controller(dev);
 	struct pci_controller *ctlr_hose = dev_get_uclass_priv(ctlr);
 	int ret;
 
-#ifdef CONFIG_PCI_ENUM_ONLY
-	enum_only = true;
-#endif
-
 	pci_mem = ctlr_hose->pci_mem;
 	pci_prefetch = ctlr_hose->pci_prefetch;
 	pci_io = ctlr_hose->pci_io;
@@ -339,8 +321,7 @@ int dm_pciauto_config_device(struct udevice *dev)
 		debug("PCI Autoconfig: Found P2P bridge, device %d\n",
 		      PCI_DEV(dm_pci_get_bdf(dev)));
 
-		dm_pciauto_setup_device(dev, 2, pci_mem, pci_prefetch, pci_io,
-					enum_only);
+		dm_pciauto_setup_device(dev, 2, pci_mem, pci_prefetch, pci_io);
 
 		ret = dm_pci_hose_probe_bus(dev);
 		if (ret < 0)
@@ -353,8 +334,7 @@ int dm_pciauto_config_device(struct udevice *dev)
 		 * just do a minimal setup of the bridge,
 		 * let the OS take care of the rest
 		 */
-		dm_pciauto_setup_device(dev, 0, pci_mem, pci_prefetch, pci_io,
-					enum_only);
+		dm_pciauto_setup_device(dev, 0, pci_mem, pci_prefetch, pci_io);
 
 		debug("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
 		      PCI_DEV(dm_pci_get_bdf(dev)));
@@ -378,8 +358,7 @@ int dm_pciauto_config_device(struct udevice *dev)
 		 */
 		debug("PCI Autoconfig: Broken bridge found, only minimal config\n");
 		dm_pciauto_setup_device(dev, 0, hose->pci_mem,
-					hose->pci_prefetch, hose->pci_io,
-					enum_only);
+					hose->pci_prefetch, hose->pci_io);
 		break;
 #endif
 
@@ -388,8 +367,7 @@ int dm_pciauto_config_device(struct udevice *dev)
 		/* fall through */
 
 	default:
-		dm_pciauto_setup_device(dev, 6, pci_mem, pci_prefetch, pci_io,
-					enum_only);
+		dm_pciauto_setup_device(dev, 6, pci_mem, pci_prefetch, pci_io);
 		break;
 	}
 
diff --git a/drivers/pci/pci_auto_old.c b/drivers/pci/pci_auto_old.c
index 8b67cfa92b..c56ff53c4f 100644
--- a/drivers/pci/pci_auto_old.c
+++ b/drivers/pci/pci_auto_old.c
@@ -36,13 +36,11 @@ void pciauto_setup_device(struct pci_controller *hose,
 	pci_size_t bar_size;
 	u16 cmdstat = 0;
 	int bar, bar_nr = 0;
-#ifndef CONFIG_PCI_ENUM_ONLY
 	u8 header_type;
 	int rom_addr;
 	pci_addr_t bar_value;
 	struct pci_region *bar_res;
 	int found_mem64 = 0;
-#endif
 	u16 class;
 
 	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
@@ -51,26 +49,20 @@ void pciauto_setup_device(struct pci_controller *hose,
 	for (bar = PCI_BASE_ADDRESS_0;
 		bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) {
 		/* Tickle the BAR and get the response */
-#ifndef CONFIG_PCI_ENUM_ONLY
 		pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
-#endif
 		pci_hose_read_config_dword(hose, dev, bar, &bar_response);
 
 		/* If BAR is not implemented go to the next BAR */
 		if (!bar_response)
 			continue;
 
-#ifndef CONFIG_PCI_ENUM_ONLY
 		found_mem64 = 0;
-#endif
 
 		/* Check the BAR type and set our address mask */
 		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
 			bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
 				   & 0xffff) + 1;
-#ifndef CONFIG_PCI_ENUM_ONLY
 			bar_res = io;
-#endif
 
 			debug("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ",
 			      bar_nr, (unsigned long long)bar_size);
@@ -80,23 +72,18 @@ void pciauto_setup_device(struct pci_controller *hose,
 				u32 bar_response_upper;
 				u64 bar64;
 
-#ifndef CONFIG_PCI_ENUM_ONLY
 				pci_hose_write_config_dword(hose, dev, bar + 4,
 					0xffffffff);
-#endif
 				pci_hose_read_config_dword(hose, dev, bar + 4,
 					&bar_response_upper);
 
 				bar64 = ((u64)bar_response_upper << 32) | bar_response;
 
 				bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
-#ifndef CONFIG_PCI_ENUM_ONLY
 				found_mem64 = 1;
-#endif
 			} else {
 				bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
 			}
-#ifndef CONFIG_PCI_ENUM_ONLY
 			if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
 				bar_res = prefetch;
 			else
@@ -105,10 +92,8 @@ void pciauto_setup_device(struct pci_controller *hose,
 			debug("PCI Autoconfig: BAR %d, %s, size=0x%llx, ",
 			      bar_nr, bar_res == prefetch ? "Prf" : "Mem",
 			      (unsigned long long)bar_size);
-#endif
 		}
 
-#ifndef CONFIG_PCI_ENUM_ONLY
 		if (pciauto_region_allocate(bar_res, bar_size,
 					    &bar_value, found_mem64) == 0) {
 			/* Write it out and update our limit */
@@ -129,7 +114,6 @@ void pciauto_setup_device(struct pci_controller *hose,
 			}
 
 		}
-#endif
 		cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
 			PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
 
@@ -138,7 +122,6 @@ void pciauto_setup_device(struct pci_controller *hose,
 		bar_nr++;
 	}
 
-#ifndef CONFIG_PCI_ENUM_ONLY
 	/* Configure the expansion ROM address */
 	pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
 	header_type &= 0x7f;
@@ -160,7 +143,6 @@ void pciauto_setup_device(struct pci_controller *hose,
 			debug("\n");
 		}
 	}
-#endif
 
 	/* PCI_COMMAND_IO must be set for VGA device */
 	pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index cad667a404..aa6d90158c 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -166,4 +166,13 @@ config RTC_STM32
 	help
 	  Enable STM32 RTC driver. This driver supports the rtc that is present
 	  on some STM32 SoCs.
+
+config RTC_ABX80X
+	bool "Enable Abracon ABx80x RTC driver"
+	depends on DM_RTC
+	help
+	  If you say yes here you get support for Abracon AB080X and AB180X
+	  families of ultra-low-power  battery- and capacitor-backed real-time
+	  clock chips.
+
 endmenu
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index ef66dc4bf0..6a45a9c874 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -55,3 +55,4 @@ obj-$(CONFIG_RTC_S35392A) += s35392a.o
 obj-$(CONFIG_RTC_STM32) += stm32_rtc.o
 obj-$(CONFIG_SANDBOX) += sandbox_rtc.o
 obj-$(CONFIG_RTC_X1205) += x1205.o
+obj-$(CONFIG_RTC_ABX80X) += abx80x.o
diff --git a/drivers/rtc/abx80x.c b/drivers/rtc/abx80x.c
new file mode 100644
index 0000000000..528b06cbd6
--- /dev/null
+++ b/drivers/rtc/abx80x.c
@@ -0,0 +1,553 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * A driver for the I2C members of the Abracon AB x8xx RTC family,
+ * and compatible: AB 1805 and AB 0805
+ *
+ * Copyright 2014-2015 Macq S.A.
+ * Copyright 2020 Linaro
+ *
+ * Author: Philippe De Muyter <phdm@macqel.be>
+ * Author: Alexandre Belloni <alexandre.belloni@bootlin.com>
+ * Author: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <i2c.h>
+#include <rtc.h>
+#include <log.h>
+
+#define ABX8XX_REG_HTH		0x00
+#define ABX8XX_REG_SC		0x01
+#define ABX8XX_REG_MN		0x02
+#define ABX8XX_REG_HR		0x03
+#define ABX8XX_REG_DA		0x04
+#define ABX8XX_REG_MO		0x05
+#define ABX8XX_REG_YR		0x06
+#define ABX8XX_REG_WD		0x07
+
+#define ABX8XX_REG_AHTH		0x08
+#define ABX8XX_REG_ASC		0x09
+#define ABX8XX_REG_AMN		0x0a
+#define ABX8XX_REG_AHR		0x0b
+#define ABX8XX_REG_ADA		0x0c
+#define ABX8XX_REG_AMO		0x0d
+#define ABX8XX_REG_AWD		0x0e
+
+#define ABX8XX_REG_STATUS	0x0f
+#define ABX8XX_STATUS_AF	BIT(2)
+#define ABX8XX_STATUS_BLF	BIT(4)
+#define ABX8XX_STATUS_WDT	BIT(6)
+
+#define ABX8XX_REG_CTRL1	0x10
+#define ABX8XX_CTRL_WRITE	BIT(0)
+#define ABX8XX_CTRL_ARST	BIT(2)
+#define ABX8XX_CTRL_12_24	BIT(6)
+
+#define ABX8XX_REG_CTRL2	0x11
+#define ABX8XX_CTRL2_RSVD	BIT(5)
+
+#define ABX8XX_REG_IRQ		0x12
+#define ABX8XX_IRQ_AIE		BIT(2)
+#define ABX8XX_IRQ_IM_1_4	(0x3 << 5)
+
+#define ABX8XX_REG_CD_TIMER_CTL	0x18
+
+#define ABX8XX_REG_OSC		0x1c
+#define ABX8XX_OSC_FOS		BIT(3)
+#define ABX8XX_OSC_BOS		BIT(4)
+#define ABX8XX_OSC_ACAL_512	BIT(5)
+#define ABX8XX_OSC_ACAL_1024	BIT(6)
+
+#define ABX8XX_OSC_OSEL		BIT(7)
+
+#define ABX8XX_REG_OSS		0x1d
+#define ABX8XX_OSS_OF		BIT(1)
+#define ABX8XX_OSS_OMODE	BIT(4)
+
+#define ABX8XX_REG_WDT		0x1b
+#define ABX8XX_WDT_WDS		BIT(7)
+#define ABX8XX_WDT_BMB_MASK	0x7c
+#define ABX8XX_WDT_BMB_SHIFT	2
+#define ABX8XX_WDT_MAX_TIME	(ABX8XX_WDT_BMB_MASK >> ABX8XX_WDT_BMB_SHIFT)
+#define ABX8XX_WDT_WRB_MASK	0x03
+#define ABX8XX_WDT_WRB_1HZ	0x02
+
+#define ABX8XX_REG_CFG_KEY	0x1f
+#define ABX8XX_CFG_KEY_OSC	0xa1
+#define ABX8XX_CFG_KEY_MISC	0x9d
+
+#define ABX8XX_REG_ID0		0x28
+
+#define ABX8XX_REG_OUT_CTRL	0x30
+#define ABX8XX_OUT_CTRL_EXDS	BIT(4)
+
+#define ABX8XX_REG_TRICKLE	0x20
+#define ABX8XX_TRICKLE_CHARGE_ENABLE	0xa0
+#define ABX8XX_TRICKLE_STANDARD_DIODE	0x8
+#define ABX8XX_TRICKLE_SCHOTTKY_DIODE	0x4
+
+static u8 trickle_resistors[] = {0, 3, 6, 11};
+
+enum abx80x_chip {AB0801, AB0803, AB0804, AB0805,
+	AB1801, AB1803, AB1804, AB1805, RV1805, ABX80X};
+
+struct abx80x_cap {
+	u16 pn;
+	bool has_tc;
+	bool has_wdog;
+};
+
+static struct abx80x_cap abx80x_caps[] = {
+	[AB0801] = {.pn = 0x0801},
+	[AB0803] = {.pn = 0x0803},
+	[AB0804] = {.pn = 0x0804, .has_tc = true, .has_wdog = true},
+	[AB0805] = {.pn = 0x0805, .has_tc = true, .has_wdog = true},
+	[AB1801] = {.pn = 0x1801},
+	[AB1803] = {.pn = 0x1803},
+	[AB1804] = {.pn = 0x1804, .has_tc = true, .has_wdog = true},
+	[AB1805] = {.pn = 0x1805, .has_tc = true, .has_wdog = true},
+	[RV1805] = {.pn = 0x1805, .has_tc = true, .has_wdog = true},
+	[ABX80X] = {.pn = 0}
+};
+
+static int abx80x_rtc_read8(struct udevice *dev, unsigned int reg)
+{
+	int ret = 0;
+	u8 buf;
+
+	if (reg > 0xff)
+		return -EINVAL;
+
+	ret = dm_i2c_read(dev, reg, &buf, sizeof(buf));
+	if (ret < 0)
+		return ret;
+
+	return buf;
+}
+
+static int abx80x_rtc_write8(struct udevice *dev, unsigned int reg, int val)
+{
+	u8 buf = (u8)val;
+
+	if (reg > 0xff)
+		return -EINVAL;
+
+	return dm_i2c_write(dev, reg, &buf, sizeof(buf));
+}
+
+static int abx80x_is_rc_mode(struct udevice *dev)
+{
+	int flags = 0;
+
+	flags =  dm_i2c_reg_read(dev, ABX8XX_REG_OSS);
+	if (flags < 0) {
+		log_err("Failed to read autocalibration attribute\n");
+		return flags;
+	}
+
+	return (flags & ABX8XX_OSS_OMODE) ? 1 : 0;
+}
+
+static int abx80x_enable_trickle_charger(struct udevice *dev, u8 trickle_cfg)
+{
+	int err;
+
+	/*
+	 * Write the configuration key register to enable access to the Trickle
+	 * register
+	 */
+	err = dm_i2c_reg_write(dev, ABX8XX_REG_CFG_KEY, ABX8XX_CFG_KEY_MISC);
+	if (err < 0) {
+		log_err("Unable to write configuration key\n");
+		return -EIO;
+	}
+
+	err = dm_i2c_reg_write(dev, ABX8XX_REG_TRICKLE,
+			       ABX8XX_TRICKLE_CHARGE_ENABLE | trickle_cfg);
+	if (err < 0) {
+		log_err("Unable to write trickle register\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int abx80x_rtc_read_time(struct udevice *dev, struct rtc_time *tm)
+{
+	unsigned char buf[8];
+	int err, flags, rc_mode = 0;
+
+	/* Read the Oscillator Failure only in XT mode */
+	rc_mode = abx80x_is_rc_mode(dev);
+	if (rc_mode < 0)
+		return rc_mode;
+
+	if (!rc_mode) {
+		flags = dm_i2c_reg_read(dev, ABX8XX_REG_OSS);
+		if (flags < 0) {
+			log_err("Unable to read oscillator status.\n");
+			return flags;
+		}
+
+		if (flags & ABX8XX_OSS_OF)
+			log_debug("Oscillator fail, data is not accurate.\n");
+	}
+
+	err = dm_i2c_read(dev, ABX8XX_REG_HTH,
+			  buf, sizeof(buf));
+	if (err < 0) {
+		log_err("Unable to read date\n");
+		return -EIO;
+	}
+
+	tm->tm_sec = bcd2bin(buf[ABX8XX_REG_SC] & 0x7F);
+	tm->tm_min = bcd2bin(buf[ABX8XX_REG_MN] & 0x7F);
+	tm->tm_hour = bcd2bin(buf[ABX8XX_REG_HR] & 0x3F);
+	tm->tm_wday = buf[ABX8XX_REG_WD] & 0x7;
+	tm->tm_mday = bcd2bin(buf[ABX8XX_REG_DA] & 0x3F);
+	tm->tm_mon = bcd2bin(buf[ABX8XX_REG_MO] & 0x1F);
+	tm->tm_year = bcd2bin(buf[ABX8XX_REG_YR]) + 2000;
+
+	return 0;
+}
+
+static int abx80x_rtc_set_time(struct udevice *dev, const struct rtc_time *tm)
+{
+	unsigned char buf[8];
+	int err, flags;
+
+	if (tm->tm_year < 2000)
+		return -EINVAL;
+
+	buf[ABX8XX_REG_HTH] = 0;
+	buf[ABX8XX_REG_SC] = bin2bcd(tm->tm_sec);
+	buf[ABX8XX_REG_MN] = bin2bcd(tm->tm_min);
+	buf[ABX8XX_REG_HR] = bin2bcd(tm->tm_hour);
+	buf[ABX8XX_REG_DA] = bin2bcd(tm->tm_mday);
+	buf[ABX8XX_REG_MO] = bin2bcd(tm->tm_mon);
+	buf[ABX8XX_REG_YR] = bin2bcd(tm->tm_year - 2000);
+	buf[ABX8XX_REG_WD] = tm->tm_wday;
+
+	err = dm_i2c_write(dev, ABX8XX_REG_HTH,
+			   buf, sizeof(buf));
+	if (err < 0) {
+		log_err("Unable to write to date registers\n");
+		return -EIO;
+	}
+
+	/* Clear the OF bit of Oscillator Status Register */
+	flags = dm_i2c_reg_read(dev, ABX8XX_REG_OSS);
+	if (flags < 0) {
+		log_err("Unable to read oscillator status.\n");
+		return flags;
+	}
+
+	err = dm_i2c_reg_write(dev, ABX8XX_REG_OSS,
+			       flags & ~ABX8XX_OSS_OF);
+	if (err < 0) {
+		log_err("Unable to write oscillator status register\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int abx80x_rtc_set_autocalibration(struct udevice *dev,
+					  int autocalibration)
+{
+	int retval, flags = 0;
+
+	if (autocalibration != 0 && autocalibration != 1024 &&
+	    autocalibration != 512) {
+		log_err("autocalibration value outside permitted range\n");
+		return -EINVAL;
+	}
+
+	flags = dm_i2c_reg_read(dev, ABX8XX_REG_OSC);
+	if (flags < 0)
+		return flags;
+
+	if (autocalibration == 0) {
+		flags &= ~(ABX8XX_OSC_ACAL_512 | ABX8XX_OSC_ACAL_1024);
+	} else if (autocalibration == 1024) {
+		/* 1024 autocalibration is 0x10 */
+		flags |= ABX8XX_OSC_ACAL_1024;
+		flags &= ~(ABX8XX_OSC_ACAL_512);
+	} else {
+		/* 512 autocalibration is 0x11 */
+		flags |= (ABX8XX_OSC_ACAL_1024 | ABX8XX_OSC_ACAL_512);
+	}
+
+	/* Unlock write access to Oscillator Control Register */
+	retval = dm_i2c_reg_write(dev, ABX8XX_REG_CFG_KEY,
+				  ABX8XX_CFG_KEY_OSC);
+	if (retval < 0) {
+		log_err("Failed to write CONFIG_KEY register\n");
+		return retval;
+	}
+
+	retval = dm_i2c_reg_write(dev, ABX8XX_REG_OSC, flags);
+
+	return retval;
+}
+
+static int abx80x_rtc_get_autocalibration(struct udevice *dev)
+{
+	int flags = 0, autocalibration;
+
+	flags =  dm_i2c_reg_read(dev, ABX8XX_REG_OSC);
+	if (flags < 0)
+		return flags;
+
+	if (flags & ABX8XX_OSC_ACAL_512)
+		autocalibration = 512;
+	else if (flags & ABX8XX_OSC_ACAL_1024)
+		autocalibration = 1024;
+	else
+		autocalibration = 0;
+
+	return autocalibration;
+}
+
+static struct rtc_time default_tm = { 0, 0, 0, 1, 1, 2000, 6, 0, 0 };
+
+static int abx80x_rtc_reset(struct udevice *dev)
+{
+	int ret = 0;
+
+	int autocalib = abx80x_rtc_get_autocalibration(dev);
+
+	if (autocalib != 0)
+		abx80x_rtc_set_autocalibration(dev, 0);
+
+	ret = abx80x_rtc_set_time(dev, &default_tm);
+	if (ret != 0) {
+		log_err("cannot set time to default_tm. error %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static const struct rtc_ops abx80x_rtc_ops = {
+	.get	= abx80x_rtc_read_time,
+	.set	= abx80x_rtc_set_time,
+	.reset  = abx80x_rtc_reset,
+	.read8  = abx80x_rtc_read8,
+	.write8 = abx80x_rtc_write8
+};
+
+static int abx80x_dt_trickle_cfg(struct udevice *dev)
+{
+	const char *diode;
+	int trickle_cfg = 0;
+	int i, ret = 0;
+	u32 tmp;
+
+	diode = ofnode_read_string(dev_ofnode(dev), "abracon,tc-diode");
+	if (!diode)
+		return ret;
+
+	if (!strcmp(diode, "standard")) {
+		trickle_cfg |= ABX8XX_TRICKLE_STANDARD_DIODE;
+	} else if (!strcmp(diode, "schottky")) {
+		trickle_cfg |= ABX8XX_TRICKLE_SCHOTTKY_DIODE;
+	} else {
+		log_err("Invalid tc-diode value: %s\n", diode);
+		return -EINVAL;
+	}
+
+	ret = ofnode_read_u32(dev_ofnode(dev), "abracon,tc-resistor", &tmp);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < sizeof(trickle_resistors); i++)
+		if (trickle_resistors[i] == tmp)
+			break;
+
+	if (i == sizeof(trickle_resistors)) {
+		log_err("Invalid tc-resistor value: %u\n", tmp);
+		return -EINVAL;
+	}
+
+	return (trickle_cfg | i);
+}
+
+static int abx80x_probe(struct udevice *dev)
+{
+	int i, data, err, trickle_cfg = -EINVAL;
+	unsigned char buf[7];
+	unsigned int part = dev->driver_data;
+	unsigned int partnumber;
+	unsigned int majrev, minrev;
+	unsigned int lot;
+	unsigned int wafer;
+	unsigned int uid;
+
+	err = dm_i2c_read(dev, ABX8XX_REG_ID0, buf, sizeof(buf));
+	if (err < 0) {
+		log_err("Unable to read partnumber\n");
+		return -EIO;
+	}
+
+	partnumber = (buf[0] << 8) | buf[1];
+	majrev = buf[2] >> 3;
+	minrev = buf[2] & 0x7;
+	lot = ((buf[4] & 0x80) << 2) | ((buf[6] & 0x80) << 1) | buf[3];
+	uid = ((buf[4] & 0x7f) << 8) | buf[5];
+	wafer = (buf[6] & 0x7c) >> 2;
+	log_debug("model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n",
+		  partnumber, majrev, minrev, lot, wafer, uid);
+
+	data = dm_i2c_reg_read(dev, ABX8XX_REG_CTRL1);
+	if (data < 0) {
+		log_err("Unable to read control register\n");
+		return -EIO;
+	}
+
+	err = dm_i2c_reg_write(dev, ABX8XX_REG_CTRL1,
+			       ((data & ~(ABX8XX_CTRL_12_24 |
+					  ABX8XX_CTRL_ARST)) |
+				ABX8XX_CTRL_WRITE));
+	if (err < 0) {
+		log_err("Unable to write control register\n");
+		return -EIO;
+	}
+
+	/* Configure RV1805 specifics */
+	if (part == RV1805) {
+		/*
+		 * Avoid accidentally entering test mode. This can happen
+		 * on the RV1805 in case the reserved bit 5 in control2
+		 * register is set. RV-1805-C3 datasheet indicates that
+		 * the bit should be cleared in section 11h - Control2.
+		 */
+		data = dm_i2c_reg_read(dev, ABX8XX_REG_CTRL2);
+		if (data < 0) {
+			log_err("Unable to read control2 register\n");
+			return -EIO;
+		}
+
+		err = dm_i2c_reg_write(dev, ABX8XX_REG_CTRL2,
+				       data & ~ABX8XX_CTRL2_RSVD);
+		if (err < 0) {
+			log_err("Unable to write control2 register\n");
+			return -EIO;
+		}
+
+		/*
+		 * Avoid extra power leakage. The RV1805 uses smaller
+		 * 10pin package and the EXTI input is not present.
+		 * Disable it to avoid leakage.
+		 */
+		data = dm_i2c_reg_read(dev, ABX8XX_REG_OUT_CTRL);
+		if (data < 0) {
+			log_err("Unable to read output control register\n");
+			return -EIO;
+		}
+
+		/*
+		 * Write the configuration key register to enable access to
+		 * the config2 register
+		 */
+		err = dm_i2c_reg_write(dev, ABX8XX_REG_CFG_KEY,
+				       ABX8XX_CFG_KEY_MISC);
+		if (err < 0) {
+			log_err("Unable to write configuration key\n");
+			return -EIO;
+		}
+
+		err = dm_i2c_reg_write(dev, ABX8XX_REG_OUT_CTRL,
+				       data | ABX8XX_OUT_CTRL_EXDS);
+		if (err < 0) {
+			log_err("Unable to write output control register\n");
+			return -EIO;
+		}
+	}
+
+	/* part autodetection */
+	if (part == ABX80X) {
+		for (i = 0; abx80x_caps[i].pn; i++)
+			if (partnumber == abx80x_caps[i].pn)
+				break;
+		if (abx80x_caps[i].pn == 0) {
+			log_err("Unknown part: %04x\n", partnumber);
+			return -EINVAL;
+		}
+		part = i;
+	}
+
+	if (partnumber != abx80x_caps[part].pn) {
+		log_err("partnumber mismatch %04x != %04x\n",
+			partnumber, abx80x_caps[part].pn);
+		return -EINVAL;
+	}
+
+	if (abx80x_caps[part].has_tc)
+		trickle_cfg = abx80x_dt_trickle_cfg(dev);
+
+	if (trickle_cfg > 0) {
+		log_debug("Enabling trickle charger: %02x\n", trickle_cfg);
+		abx80x_enable_trickle_charger(dev, trickle_cfg);
+	}
+
+	err = dm_i2c_reg_write(dev, ABX8XX_REG_CD_TIMER_CTL, BIT(2));
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static const struct udevice_id abx80x_of_match[] = {
+	{
+		.compatible = "abracon,abx80x",
+		.data = ABX80X
+	},
+	{
+		.compatible = "abracon,ab0801",
+		.data = AB0801
+	},
+	{
+		.compatible = "abracon,ab0803",
+		.data = AB0803
+	},
+	{
+		.compatible = "abracon,ab0804",
+		.data = AB0804
+	},
+	{
+		.compatible = "abracon,ab0805",
+		.data = AB0805
+	},
+	{
+		.compatible = "abracon,ab1801",
+		.data = AB1801
+	},
+	{
+		.compatible = "abracon,ab1803",
+		.data = AB1803
+	},
+	{
+		.compatible = "abracon,ab1804",
+		.data = AB1804
+	},
+	{
+		.compatible = "abracon,ab1805",
+		.data = AB1805
+	},
+	{
+		.compatible = "microcrystal,rv1805",
+		.data = RV1805
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(abx80x_rtc) = {
+	.name	= "rtc-abx80x",
+	.id     = UCLASS_RTC,
+	.probe		= abx80x_probe,
+	.of_match = abx80x_of_match,
+	.ops = &abx80x_rtc_ops,
+};
diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c
index a1d527529f..91d078a9d5 100644
--- a/drivers/video/video-uclass.c
+++ b/drivers/video/video-uclass.c
@@ -290,6 +290,16 @@ int video_sync_copy(struct udevice *dev, void *from, void *to)
 
 	return 0;
 }
+
+int video_sync_copy_all(struct udevice *dev)
+{
+	struct video_priv *priv = dev_get_uclass_priv(dev);
+
+	video_sync_copy(dev, priv->fb, priv->fb + priv->fb_size);
+
+	return 0;
+}
+
 #endif
 
 /* Set up the colour map */
diff --git a/include/binman.h b/include/binman.h
index 8b89a9666d..5958dfb448 100644
--- a/include/binman.h
+++ b/include/binman.h
@@ -71,6 +71,20 @@ int binman_entry_find(const char *name, struct binman_entry *entry);
 ofnode binman_section_find_node(const char *name);
 
 /**
+ * binman_select_subnode() - Select a subnode to use to find entries
+ *
+ * Normally binman selects the top-level node for future entry requests, such as
+ * binman_entry_find(). This function allows a subnode to be chosen instead.
+ *
+ * @name: Name of subnode, typically a section. This must be in the top-level
+ *	binman node
+ * @return 0 if OK, -EINVAL if there is no /binman node, -ECHILD if multiple
+ *	images are being used but the first image is not available, -ENOENT if
+ *	the requested subnode cannot be found
+ */
+int binman_select_subnode(const char *name);
+
+/**
  * binman_init() - Set up the binman symbol information
  *
  * This locates the binary symbol information in the device tree ready for use
diff --git a/include/bloblist.h b/include/bloblist.h
index 8cdce61187..964b974fda 100644
--- a/include/bloblist.h
+++ b/include/bloblist.h
@@ -243,6 +243,16 @@ void bloblist_show_list(void);
 const char *bloblist_tag_name(enum bloblist_tag_t tag);
 
 /**
+ * bloblist_reloc() - Relocate the bloblist and optionally resize it
+ *
+ * @to: Pointer to new bloblist location (must not overlap old location)
+ * @to:size: New size for bloblist (must be larger than from_size)
+ * @from: Pointer to bloblist to relocate
+ * @from_size: Size of bloblist to relocate
+ */
+void bloblist_reloc(void *to, uint to_size, void *from, uint from_size);
+
+/**
  * bloblist_init() - Init the bloblist system with a single bloblist
  *
  * This uses CONFIG_BLOBLIST_ADDR and CONFIG_BLOBLIST_SIZE to set up a bloblist
diff --git a/include/bootcount.h b/include/bootcount.h
index cd30403984..b1d1fe53d1 100644
--- a/include/bootcount.h
+++ b/include/bootcount.h
@@ -69,7 +69,7 @@ void bootcount_store(ulong);
  */
 ulong bootcount_load(void);
 
-#if defined(CONFIG_SPL_BOOTCOUNT_LIMIT) || defined(CONFIG_BOOTCOUNT_LIMIT)
+#if defined(CONFIG_SPL_BOOTCOUNT_LIMIT) || defined(CONFIG_TPL_BOOTCOUNT_LIMIT) || defined(CONFIG_BOOTCOUNT_LIMIT)
 
 #if !defined(CONFIG_SYS_BOOTCOUNT_LE) && !defined(CONFIG_SYS_BOOTCOUNT_BE)
 # if __BYTE_ORDER == __LITTLE_ENDIAN
@@ -130,7 +130,7 @@ static inline void bootcount_inc(void)
 
 #ifndef CONFIG_SPL_BUILD
 	/* Only increment bootcount when no bootcount support in SPL */
-#ifndef CONFIG_SPL_BOOTCOUNT_LIMIT
+#if !defined(CONFIG_SPL_BOOTCOUNT_LIMIT) && !defined(CONFIG_TPL_BOOTCOUNT_LIMIT)
 	bootcount_store(++bootcount);
 #endif
 	env_set_ulong("bootcount", bootcount);
@@ -140,5 +140,5 @@ static inline void bootcount_inc(void)
 #else
 static inline int bootcount_error(void) { return 0; }
 static inline void bootcount_inc(void) {}
-#endif /* CONFIG_SPL_BOOTCOUNT_LIMIT || CONFIG_BOOTCOUNT_LIMIT */
+#endif /* CONFIG_SPL_BOOTCOUNT_LIMIT || CONFIG_TPL_BOOTCOUNT_LIMIT || CONFIG_BOOTCOUNT_LIMIT */
 #endif /* _BOOTCOUNT_H__ */
diff --git a/include/linux/arm-smccc.h b/include/linux/arm-smccc.h
index 2d1e6cc156..7f2be23394 100644
--- a/include/linux/arm-smccc.h
+++ b/include/linux/arm-smccc.h
@@ -11,8 +11,8 @@
  * http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html
  */
 
-#define ARM_SMCCC_STD_CALL		0
-#define ARM_SMCCC_FAST_CALL		1
+#define ARM_SMCCC_STD_CALL		0UL
+#define ARM_SMCCC_FAST_CALL		1UL
 #define ARM_SMCCC_TYPE_SHIFT		31
 
 #define ARM_SMCCC_SMC_32		0
diff --git a/include/spl.h b/include/spl.h
index a7648787b7..faffeb519a 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -58,6 +58,7 @@ static inline bool u_boot_first_phase(void)
 }
 
 enum u_boot_phase {
+	PHASE_NONE,	/* Invalid phase, signifying before U-Boot */
 	PHASE_TPL,	/* Running in TPL */
 	PHASE_SPL,	/* Running in SPL */
 	PHASE_BOARD_F,	/* Running in U-Boot before relocation */
@@ -123,6 +124,58 @@ static inline enum u_boot_phase spl_phase(void)
 #endif
 }
 
+/**
+ * spl_prev_phase() - Figure out the previous U-Boot phase
+ *
+ * @return the previous phase from this one, e.g. if called in SPL this returns
+ *	PHASE_TPL, if TPL is enabled
+ */
+static inline enum u_boot_phase spl_prev_phase(void)
+{
+#ifdef CONFIG_TPL_BUILD
+	return PHASE_NONE;
+#elif defined(CONFIG_SPL_BUILD)
+	return IS_ENABLED(CONFIG_TPL) ? PHASE_TPL : PHASE_NONE;
+#else
+	return IS_ENABLED(CONFIG_SPL) ? PHASE_SPL : PHASE_NONE;
+#endif
+}
+
+/**
+ * spl_next_phase() - Figure out the next U-Boot phase
+ *
+ * @return the next phase from this one, e.g. if called in TPL this returns
+ *	PHASE_SPL
+ */
+static inline enum u_boot_phase spl_next_phase(void)
+{
+#ifdef CONFIG_TPL_BUILD
+	return PHASE_SPL;
+#else
+	return PHASE_BOARD_F;
+#endif
+}
+
+/**
+ * spl_phase_name() - Get the name of the current phase
+ *
+ * @return phase name
+ */
+static inline const char *spl_phase_name(enum u_boot_phase phase)
+{
+	switch (phase) {
+	case PHASE_TPL:
+		return "TPL";
+	case PHASE_SPL:
+		return "SPL";
+	case PHASE_BOARD_F:
+	case PHASE_BOARD_R:
+		return "U-Boot";
+	default:
+		return "phase?";
+	}
+}
+
 /* A string name for SPL or TPL */
 #ifdef CONFIG_SPL_BUILD
 # ifdef CONFIG_TPL_BUILD
diff --git a/include/uuid.h b/include/uuid.h
index 0c653cb087..4a4883d3b5 100644
--- a/include/uuid.h
+++ b/include/uuid.h
@@ -23,6 +23,7 @@ struct uuid {
 #define UUID_STR_FORMAT_GUID	BIT(0)
 #define UUID_STR_UPPER_CASE	BIT(1)
 
+/* Use UUID_STR_LEN + 1 for string space */
 #define UUID_STR_LEN		36
 #define UUID_BIN_LEN		sizeof(struct uuid)
 
diff --git a/include/video.h b/include/video.h
index 74d822fadb..827733305e 100644
--- a/include/video.h
+++ b/include/video.h
@@ -246,11 +246,25 @@ void video_set_default_colors(struct udevice *dev, bool invert);
  *	frame buffer start
  */
 int video_sync_copy(struct udevice *dev, void *from, void *to);
+
+/**
+ * video_sync_copy_all() - Sync the entire framebuffer to the copy
+ *
+ * @dev: Vidconsole device being updated
+ * @return 0 (always)
+ */
+int video_sync_copy_all(struct udevice *dev);
 #else
 static inline int video_sync_copy(struct udevice *dev, void *from, void *to)
 {
 	return 0;
 }
+
+static inline int video_sync_copy_all(struct udevice *dev)
+{
+	return 0;
+}
+
 #endif
 
 #ifndef CONFIG_DM_VIDEO
diff --git a/lib/Makefile b/lib/Makefile
index 851a80ef3b..edc1c3dd4f 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -92,7 +92,9 @@ obj-y += display_options.o
 CFLAGS_display_options.o := $(if $(BUILD_TAG),-DBUILD_TAG='"$(BUILD_TAG)"')
 obj-$(CONFIG_BCH) += bch.o
 obj-$(CONFIG_MMC_SPI) += crc7.o
+#ifndef CONFIG_TPL_BUILD
 obj-y += crc32.o
+#endif
 obj-$(CONFIG_CRC32C) += crc32c.o
 obj-y += ctype.o
 obj-y += div64.o
diff --git a/lib/binman.c b/lib/binman.c
index f027d1b304..f415df3054 100644
--- a/lib/binman.c
+++ b/lib/binman.c
@@ -30,6 +30,34 @@ struct binman_info {
 
 static struct binman_info *binman;
 
+/**
+ * find_image_node() - Find the top-level binman node
+ *
+ * Finds the binman node which can be used to load entries. The correct node
+ * depends on whether multiple-images is in use.
+ *
+ * @nodep: Returns the node found, on success
+ * @return 0 if OK, , -EINVAL if there is no /binman node, -ECHILD if multiple
+ * images are being used but the first image is not available
+ */
+static int find_image_node(ofnode *nodep)
+{
+	ofnode node;
+
+	node = ofnode_path("/binman");
+	if (!ofnode_valid(node))
+		return log_msg_ret("binman node", -EINVAL);
+	if (ofnode_read_bool(node, "multiple-images")) {
+		node = ofnode_first_subnode(node);
+
+		if (!ofnode_valid(node))
+			return log_msg_ret("first image", -ECHILD);
+	}
+	*nodep = node;
+
+	return 0;
+}
+
 static int binman_entry_find_internal(ofnode node, const char *name,
 				      struct binman_entry *entry)
 {
@@ -88,21 +116,34 @@ int binman_get_rom_offset(void)
 	return binman->rom_offset;
 }
 
+int binman_select_subnode(const char *name)
+{
+	ofnode node;
+	int ret;
+
+	ret = find_image_node(&node);
+	if (ret)
+		return log_msg_ret("main", -ENOENT);
+	node = ofnode_find_subnode(node, name);
+	if (!ofnode_valid(node))
+		return log_msg_ret("node", -ENOENT);
+	binman->image = node;
+	log_debug("binman: Selected image subnode '%s'\n",
+		  ofnode_get_name(binman->image));
+
+	return 0;
+}
+
 int binman_init(void)
 {
+	int ret;
+
 	binman = malloc(sizeof(struct binman_info));
 	if (!binman)
 		return log_msg_ret("space for binman", -ENOMEM);
-	binman->image = ofnode_path("/binman");
-	if (!ofnode_valid(binman->image))
-		return log_msg_ret("binman node", -EINVAL);
-	if (ofnode_read_bool(binman->image, "multiple-images")) {
-		ofnode node = ofnode_first_subnode(binman->image);
-
-		if (!ofnode_valid(node))
-			return log_msg_ret("first image", -ENOENT);
-		binman->image = node;
-	}
+	ret = find_image_node(&binman->image);
+	if (ret)
+		return log_msg_ret("node", -ENOENT);
 	binman_set_rom_offset(ROM_OFFSET_NONE);
 
 	return 0;
diff --git a/lib/display_options.c b/lib/display_options.c
index b2025eeb5c..cd48998b6d 100644
--- a/lib/display_options.c
+++ b/lib/display_options.c
@@ -169,11 +169,10 @@ int print_buffer(ulong addr, const void *data, uint width, uint count,
 				x = lb.us[i] = *(volatile uint16_t *)data;
 			else
 				x = lb.uc[i] = *(volatile uint8_t *)data;
-#if defined(CONFIG_SPL_BUILD)
-			printf(" %x", (uint)x);
-#else
-			printf(" %0*lx", width * 2, x);
-#endif
+			if (CONFIG_IS_ENABLED(USE_TINY_PRINTF))
+				printf(" %x", (uint)x);
+			else
+				printf(" %0*lx", width * 2, x);
 			data += width;
 		}
 
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 0ab7105fef..a2d2fb4e1f 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -600,7 +600,8 @@ int fdtdec_prepare_fdt(void)
 #ifdef CONFIG_SPL_BUILD
 		puts("Missing DTB\n");
 #else
-		puts("No valid device tree binary found - please append one to U-Boot binary, use u-boot-dtb.bin or define CONFIG_OF_EMBED. For sandbox, use -d <file.dtb>\n");
+		printf("No valid device tree binary found at %p\n",
+		       gd->fdt_blob);
 # ifdef DEBUG
 		if (gd->fdt_blob) {
 			printf("fdt_blob=%p\n", gd->fdt_blob);
@@ -1252,7 +1253,7 @@ __weak void *board_fdt_blob_setup(void)
 	void *fdt_blob = NULL;
 #ifdef CONFIG_SPL_BUILD
 	/* FDT is at end of BSS unless it is in a different memory region */
-	if (IS_ENABLED(CONFIG_SPL_SEPARATE_BSS))
+	if (CONFIG_IS_ENABLED(SEPARATE_BSS))
 		fdt_blob = (ulong *)&_image_binary_end;
 	else
 		fdt_blob = (ulong *)&__bss_end;
diff --git a/lib/rsa/rsa-verify.c b/lib/rsa/rsa-verify.c
index 0ab0f629d0..e34d3293d1 100644
--- a/lib/rsa/rsa-verify.c
+++ b/lib/rsa/rsa-verify.c
@@ -522,10 +522,10 @@ int rsa_verify_hash(struct image_sign_info *info,
 			return ret;
 
 		/* No luck, so try each of the keys in turn */
-		for (ndepth = 0, noffset = fdt_next_node(info->fit, sig_node,
+		for (ndepth = 0, noffset = fdt_next_node(blob, sig_node,
 							 &ndepth);
 		     (noffset >= 0) && (ndepth > 0);
-		     noffset = fdt_next_node(info->fit, noffset, &ndepth)) {
+		     noffset = fdt_next_node(blob, noffset, &ndepth)) {
 			if (ndepth == 1 && noffset != node) {
 				ret = rsa_verify_with_keynode(info, hash,
 							      sig, sig_len,
diff --git a/net/eth-uclass.c b/net/eth-uclass.c
index 7c2454f5ae..35842f577d 100644
--- a/net/eth-uclass.c
+++ b/net/eth-uclass.c
@@ -487,7 +487,7 @@ static int eth_pre_unbind(struct udevice *dev)
 
 static bool eth_dev_get_mac_address(struct udevice *dev, u8 mac[ARP_HLEN])
 {
-#if IS_ENABLED(CONFIG_OF_CONTROL)
+#if CONFIG_IS_ENABLED(OF_CONTROL)
 	const uint8_t *p;
 
 	p = dev_read_u8_array_ptr(dev, "mac-address", ARP_HLEN);
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index e2cf205451..86e011c06d 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1222,7 +1222,6 @@ CONFIG_PCI_CLK_FREQ
 CONFIG_PCI_CONFIG_HOST_BRIDGE
 CONFIG_PCI_EHCI_DEVICE
 CONFIG_PCI_EHCI_DEVNO
-CONFIG_PCI_ENUM_ONLY
 CONFIG_PCI_FIXUP_DEV
 CONFIG_PCI_GT64120
 CONFIG_PCI_INDIRECT_BRIDGE
diff --git a/test/bloblist.c b/test/bloblist.c
index 900299dd68..85a6c39680 100644
--- a/test/bloblist.c
+++ b/test/bloblist.c
@@ -347,6 +347,42 @@ static int bloblist_test_align(struct unit_test_state *uts)
 }
 BLOBLIST_TEST(bloblist_test_align, 0);
 
+/* Test relocation of a bloblist */
+static int bloblist_test_reloc(struct unit_test_state *uts)
+{
+	const uint large_size = TEST_BLOBLIST_SIZE;
+	const uint small_size = 0x20;
+	void *old_ptr, *new_ptr;
+	void *blob1, *blob2;
+	ulong new_addr;
+	ulong new_size;
+
+	ut_assertok(bloblist_new(TEST_ADDR, TEST_BLOBLIST_SIZE, 0));
+	old_ptr = map_sysmem(TEST_ADDR, TEST_BLOBLIST_SIZE);
+
+	/* Add one blob and then one that won't fit */
+	blob1 = bloblist_add(TEST_TAG, small_size, 0);
+	ut_assertnonnull(blob1);
+	blob2 = bloblist_add(TEST_TAG2, large_size, 0);
+	ut_assertnull(blob2);
+
+	/* Relocate the bloblist somewhere else, a bit larger */
+	new_addr = TEST_ADDR + TEST_BLOBLIST_SIZE;
+	new_size = TEST_BLOBLIST_SIZE + 0x100;
+	new_ptr = map_sysmem(new_addr, TEST_BLOBLIST_SIZE);
+	bloblist_reloc(new_ptr, new_size, old_ptr, TEST_BLOBLIST_SIZE);
+	gd->bloblist = new_ptr;
+
+	/* Check the old blob is there and that we can now add the bigger one */
+	ut_assertnonnull(bloblist_find(TEST_TAG, small_size));
+	ut_assertnull(bloblist_find(TEST_TAG2, small_size));
+	blob2 = bloblist_add(TEST_TAG2, large_size, 0);
+	ut_assertnonnull(blob2);
+
+	return 0;
+}
+BLOBLIST_TEST(bloblist_test_reloc, 0);
+
 int do_ut_bloblist(struct cmd_tbl *cmdtp, int flag, int argc,
 		   char *const argv[])
 {