clk: ti: k3-pll: Change DIV_CTRL programming to read-modify-write

There are three different divider values in the DIV_CTRL register
controlled by the k3-pll driver. Currently the ti_pll_clk_set_rate
function writes the entire register when programming plld, even though
plld only resides in the lower 6 bits.

Change the plld programming to read-modify-write to only affect the
relevant bits for plld and to preserve the other two divider values
present in the upper 16 bits, otherwise they will always get set to zero
when programming plld.

Fixes: 0aa2930ca192 ("clk: add support for TI K3 SoC PLL")
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

1 files changed, 11 insertions, 2 deletions

diff --git a/drivers/clk/ti/clk-k3-pll.c b/drivers/clk/ti/clk-k3-pll.c
index bf2407a020..bf762c558e 100644
--- a/drivers/clk/ti/clk-k3-pll.c
+++ b/drivers/clk/ti/clk-k3-pll.c
@@ -2,7 +2,7 @@
 /*
  * Texas Instruments K3 SoC PLL clock driver
  *
- * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - http://www.ti.com/
  *	Tero Kristo <t-kristo@ti.com>
  */
 
@@ -122,6 +122,7 @@ static ulong ti_pll_clk_set_rate(struct clk *clk, ulong rate)
 	unsigned long pllm;
 	u32 pllfm = 0;
 	unsigned long plld;
+	u32 div_ctrl;
 	u32 rem;
 	int shift;
 
@@ -175,7 +176,15 @@ static ulong ti_pll_clk_set_rate(struct clk *clk, ulong rate)
 
 	writel(pllm, pll->reg + PLL_16FFT_FREQ_CTRL0);
 	writel(pllfm, pll->reg + PLL_16FFT_FREQ_CTRL1);
-	writel(plld, pll->reg + PLL_16FFT_DIV_CTRL);
+
+	/*
+	 * div_ctrl register contains other divider values, so rmw
+	 * only plld and leave existing values alone
+	 */
+	div_ctrl = readl(pll->reg + PLL_16FFT_DIV_CTRL);
+	div_ctrl &= ~PLL_16FFT_DIV_CTRL_REF_DIV_MASK;
+	div_ctrl |= plld;
+	writel(div_ctrl, pll->reg + PLL_16FFT_DIV_CTRL);
 
 	ctrl &= ~PLL_16FFT_CTRL_BYPASS_EN;
 	ctrl |= PLL_16FFT_CTRL_PLL_EN;