Merge git://git.denx.de/u-boot-rockchip

34 files changed, 3263 insertions, 19 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index a3069e65a3..c024b41f13 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -143,8 +143,20 @@ M:	Simon Glass <sjg@chromium.org>
 M:	Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
 S:	Maintained
 T:	git git://git.denx.de/u-boot-rockchip.git
+F:	arch/arm/include/asm/arch-rockchip/
 F:	arch/arm/mach-rockchip/
 F:	board/rockchip/
+F:	drivers/clk/rockchip/
+F:	drivers/gpio/rk_gpio.c
+F:	drivers/misc/rockchip-efuse.c
+F:	drivers/pinctrl/rockchip/
+F:	drivers/ram/rockchip/
+F:	drivers/sysreset/sysreset_rockchip.c
+F:	tools/rkcommon.c
+F:	tools/rkcommon.h
+F:	tools/rkimage.c
+F:	tools/rksd.c
+F:	tools/rkspi.c
 
 ARM SAMSUNG
 M:	Minkyu Kang <mk7.kang@samsung.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 9db56f2d9d..1518616bfb 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -29,6 +29,7 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
 dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3036-sdk.dtb \
+	rk3128-evb.dtb \
 	rk3188-radxarock.dtb \
 	rk3288-evb.dtb \
 	rk3288-fennec.dtb \
diff --git a/arch/arm/dts/rk3128-evb.dts b/arch/arm/dts/rk3128-evb.dts
new file mode 100644
index 0000000000..6940af9a5c
--- /dev/null
+++ b/arch/arm/dts/rk3128-evb.dts
@@ -0,0 +1,95 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "rk3128.dtsi"
+
+/ {
+	model = "Rockchip RK3128 Evaluation board";
+	compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-drv {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-drv {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		gpio = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_host_ohci {
+	status = "okay";
+};
+
+&usb_otg {
+	vbus-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&emmc {
+	fifo-mode;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_otg {
+		otg_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 26 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <2 23 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/dts/rk3128.dtsi b/arch/arm/dts/rk3128.dtsi
new file mode 100644
index 0000000000..3ef2737f5b
--- /dev/null
+++ b/arch/arm/dts/rk3128.dtsi
@@ -0,0 +1,804 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3128-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "rockchip,rk3128";
+	rockchip,sram = <&sram>;
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		spi0 = &spi0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3128-smp";
+
+		cpu0:cpu@0x000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x000>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu1:cpu@0x001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x001>;
+		};
+
+		cpu2:cpu@0x002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x002>;
+		};
+
+		cpu3:cpu@0x003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x003>;
+		};
+	};
+
+	cpu_axi_bus: cpu_axi_bus {
+		compatible = "rockchip,cpu_axi_bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		qos {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			crypto {
+				reg = <0x10128080 0x20>;
+			};
+
+			core {
+				reg = <0x1012a000 0x20>;
+			};
+
+			peri {
+				reg = <0x1012c000 0x20>;
+			};
+
+			gpu {
+				reg = <0x1012d000 0x20>;
+			};
+
+			vpu {
+				reg = <0x1012e000 0x20>;
+			};
+
+			rga {
+				reg = <0x1012f000 0x20>;
+			};
+			ebc {
+				reg = <0x1012f080 0x20>;
+			};
+
+			iep {
+				reg = <0x1012f100 0x20>;
+			};
+
+			lcdc {
+				reg = <0x1012f180 0x20>;
+				rockchip,priority = <3 3>;
+			};
+
+			vip {
+				reg = <0x1012f200 0x20>;
+				rockchip,priority = <3 3>;
+			};
+		};
+
+		msch {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			msch@10128000 {
+				reg = <0x10128000 0x20>;
+				rockchip,read-latency = <0x3f>;
+			};
+		};
+	};
+
+	psci {
+		compatible      = "arm,psci";
+		method          = "smc";
+		cpu_suspend     = <0x84000001>;
+		cpu_off         = <0x84000002>;
+		cpu_on          = <0x84000003>;
+		migrate         = <0x84000005>;
+	};
+
+	amba {
+		compatible = "arm,amba-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		pdma: pdma@20078000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20078000 0x4000>;
+			arm,pl330-broken-no-flushp;//2
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC2>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	xin12m: xin12m {
+		compatible = "fixed-clock";
+		clocks = <&xin24m>;
+		clock-frequency = <12000000>;
+		clock-output-names = "xin12m";
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	timer@20044000 {
+		compatible = "arm,armv7-timer";
+		reg = <0x20044000 0xb8>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,broadcast = <1>;
+	};
+
+	watchdog: wdt@2004c000 {
+		compatible = "rockchip,watch dog";
+		reg = <0x2004c000 0x100>;
+		clock-names = "pclk_wdt";
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,irq = <1>;
+		rockchip,timeout = <60>;
+		rockchip,atboot = <1>;
+		rockchip,debug = <0>;
+	};
+
+	reset: reset@20000110 {
+		compatible = "rockchip,reset";
+		reg = <0x20000110 0x24>;
+		#reset-cells = <1>;
+	};
+
+	nandc: nandc@10500000 {
+		compatible = "rockchip,rk-nandc";
+		reg = <0x10500000 0x4000>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&nandc_ale &nandc_cle &nandc_wrn &nandc_rdn &nandc_rdy &nandc_cs0 &nandc_data>;
+		nandc_id = <0>;
+		clocks = <&cru SCLK_NANDC>,
+			 <&cru HCLK_NANDC>,
+			 <&cru SRST_NANDC>;
+		clock-names = "clk_nandc", "g_clk_nandc", "hclk_nandc";
+	};
+
+	dmc: dmc@20004000 {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3128-dmc", "syscon";
+		reg = <0x0 0x20004000 0x0 0x1000>;
+	};
+
+	cru: clock-controller@20000000 {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3128-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	uart0: serial0@20060000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20060000 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		dmas = <&pdma 2>, <&pdma 3>;
+		#dma-cells = <2>;
+	};
+
+	uart1: serial1@20064000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20064000 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		dmas = <&pdma 4>, <&pdma 5>;
+		#dma-cells = <2>;
+	};
+
+	uart2: serial2@20068000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20068000 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		dmas = <&pdma 6>, <&pdma 7>;
+		#dma-cells = <2>;
+	};
+
+	saradc: saradc@2006c000 {
+		compatible = "rockchip,saradc";
+		reg = <0x2006c000 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	pwm0: pwm0@20050000 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050000 0x10>;
+		#pwm-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+	};
+
+	pwm1: pwm1@20050010 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050010 0x10>;
+		#pwm-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+	};
+
+	pwm2: pwm2@20050020 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050020 0x10>;
+		#pwm-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+	};
+
+	pwm3: pwm3@20050030 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050030 0x10>;
+		#pwm-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+	};
+
+	sram: sram@10080400 {
+		compatible = "rockchip,rk3128-smp-sram", "mmio-sram";
+		reg = <0x10080400 0x1C00>;
+		map-exec;
+		map-cacheable;
+	};
+
+	pmu: syscon@100a0000 {
+		compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
+		reg = <0x100a0000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	gic: interrupt-controller@10139000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		reg = <0x10139000 0x1000>,
+		      <0x1013a000 0x1000>,
+		      <0x1013c000 0x2000>,
+		      <0x1013e000 0x2000>;
+		interrupts = <GIC_PPI 9 0xf04>;
+	};
+
+	u2phy: usb2-phy {
+		compatible = "rockchip,rk3128-usb2phy";
+		reg = <0x017c 0x0c>;
+		rockchip,grf = <&grf>;
+		clocks = <&cru SCLK_OTGPHY0>;
+		clock-names = "phyclk";
+		#clock-cells = <0>;
+		clock-output-names = "usb480m_phy";
+		#phy-cells = <1>;
+		status = "disabled";
+
+		u2phy_otg: otg-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "otg-bvalid", "otg-id",
+					  "linestate";
+			status = "disabled";
+		};
+
+		u2phy_host: host-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "linestate";
+			status = "disabled";
+		};
+	};
+
+	usb_otg: usb@10180000 {
+		compatible = "rockchip,rk3128-usb", "rockchip,rk3288-usb",
+			     "snps,dwc2";
+		reg = <0x10180000 0x40000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		dr_mode = "otg";
+		g-use-dma;
+		hnp-srp-disable;
+		phys = <&u2phy 0>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host_ehci: usb@101c0000 {
+		compatible = "generic-ehci";
+		reg = <0x101c0000 0x20000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&u2phy 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host_ohci: usb@101e0000 {
+		compatible = "generic-ohci";
+		reg = <0x101e0000 0x20000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&u2phy 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	sdmmc: dwmmc@10214000 {
+		compatible = "rockchip,rk312x-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10214000 0x4000>;
+		max-frequency = <150000000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+		bus-width = <4>;
+		status = "disabled";
+	};
+
+	emmc: dwmmc@1021c000 {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x1021c000 0x4000>;
+		max-frequency = <150000000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		bus-width = <8>;
+		default-sample-phase = <158>;
+		num-slots = <1>;
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	i2c0: i2c0@20072000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <20072000 0x1000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+	};
+
+	i2c1: i2c1@20056000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+	};
+
+	i2c2: i2c2@2005a000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x2005a000 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+	};
+
+	i2c3: i2c3@2005e000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x2005e000 0x1000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+	};
+
+	spi0: spi@20074000 {
+		compatible = "rockchip,rk3128-spi", "rockchip,rk3288-spi";
+		reg = <0x20074000 0x1000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_txd_mux0 &spi0_rxd_mux0 &spi0_clk_mux0 &spi0_cs0_mux0 &spi0_cs1_mux0>;
+		rockchip,spi-src-clk = <0>;
+		num-cs = <2>;
+		clocks =<&cru SCLK_SPI>, <&cru PCLK_SPI>;
+		clock-names = "spi","pclk_spi0";
+		dmas = <&pdma 8>, <&pdma 9>;
+		#dma-cells = <2>;
+		dma-names = "tx", "rx";
+	};
+
+	grf: syscon@20008000 {
+		u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3128-grf", "syscon";
+		reg = <0x20008000 0x1000>;
+	};
+
+	pinctrl: pinctrl@20008000 {
+		compatible = "rockchip,rk3128-pinctrl";
+		reg = <0x20008000 0xA8>,
+		      <0x200080A8 0x4C>,
+		      <0x20008118 0x20>,
+		      <0x20008100 0x04>;
+		reg-names = "base", "mux", "pull", "drv";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@2007c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2007c000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@20084000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20084000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio2@20088000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20088000 0x100>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		emmc {
+			/*
+			 * We run eMMC at max speed; bump up drive strength.
+			 * We also have external pulls, so disable the internal ones.
+			 */
+
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_pwren: emmc-pwren {
+				rockchip,pins = <2 5 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+						<1 25 RK_FUNC_2 &pcfg_pull_none>,
+						<1 26 RK_FUNC_2 &pcfg_pull_none>,
+						<1 27 RK_FUNC_2 &pcfg_pull_none>,
+						<1 28 RK_FUNC_2 &pcfg_pull_none>,
+						<1 29 RK_FUNC_2 &pcfg_pull_none>,
+						<1 30 RK_FUNC_2 &pcfg_pull_none>,
+						<1 31 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		nandc{
+			nandc_ale:nandc-ale {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			nandc_cle:nandc-cle {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			nandc_wrn:nandc-wrn {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			nandc_rdn:nandc-rdn {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			nandc_rdy:nandc-rdy {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			nandc_cs0:nandc-cs0 {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			nandc_data: nandc-data {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_none>,
+						<0 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
+						<2 23 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+				<1 19 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <1 RK_PC1 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_wp: sdmmc-wp {
+				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_pwren: sdmmc-pwren {
+				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_up>,
+						<1 RK_PC3 1 &pcfg_pull_up>,
+						<1 RK_PC4 1 &pcfg_pull_up>,
+						<1 RK_PC5 1 &pcfg_pull_up>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <0 1 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <0 27 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
+						<0 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+						<0 3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 20 3 &pcfg_pull_none>,
+						<2 21 3 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>,
+						<0 7 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_txd_mux0:spi0-txd-mux0 {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			spi0_rxd_mux0:spi0-rxd-mux0 {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			spi0_clk_mux0:spi0-clk-mux0 {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			spi0_cs0_mux0:spi0-cs0-mux0 {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			spi0_cs1_mux0:spi0-cs1-mux0 {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 96bd4fec01..d2c961e317 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -16,6 +16,7 @@
 		u-boot,mmc-env-offset = <0x4000>;      /* @  16KB */
 		u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
 		u-boot,boot-led = "module_led";
+		sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
 	};
 
 	chosen {
@@ -544,12 +545,17 @@
 
 &dwc3_typec1 {
 	status = "okay";
+	tsd,usb-port-power = "usbhub_enable";
 };
 
 &vopb {
 	status = "okay";
 };
 
+&gpio1 {
+	u-boot,dm-pre-reloc;
+};
+
 &gpio3 {
 	u-boot,dm-pre-reloc;
 };
diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3128.h b/arch/arm/include/asm/arch-rockchip/cru_rk3128.h
new file mode 100644
index 0000000000..90012c7fce
--- /dev/null
+++ b/arch/arm/include/asm/arch-rockchip/cru_rk3128.h
@@ -0,0 +1,212 @@
+/*
+ * Copyright (c) 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_CRU_RK3128_H
+#define _ASM_ARCH_CRU_RK3128_H
+
+#include <common.h>
+
+#define MHz		1000000
+#define OSC_HZ		(24 * MHz)
+
+#define APLL_HZ		(600 * MHz)
+#define GPLL_HZ		(594 * MHz)
+
+#define CORE_PERI_HZ	150000000
+#define CORE_ACLK_HZ	300000000
+
+#define BUS_ACLK_HZ	148500000
+#define BUS_HCLK_HZ	148500000
+#define BUS_PCLK_HZ	74250000
+
+#define PERI_ACLK_HZ	148500000
+#define PERI_HCLK_HZ	148500000
+#define PERI_PCLK_HZ	74250000
+
+/* Private data for the clock driver - used by rockchip_get_cru() */
+struct rk3128_clk_priv {
+	struct rk3128_cru *cru;
+};
+
+struct rk3128_cru {
+	struct rk3128_pll {
+		unsigned int con0;
+		unsigned int con1;
+		unsigned int con2;
+		unsigned int con3;
+	} pll[4];
+	unsigned int cru_mode_con;
+	unsigned int cru_clksel_con[35];
+	unsigned int cru_clkgate_con[11];
+	unsigned int reserved;
+	unsigned int cru_glb_srst_fst_value;
+	unsigned int cru_glb_srst_snd_value;
+	unsigned int reserved1[2];
+	unsigned int cru_softrst_con[9];
+	unsigned int cru_misc_con;
+	unsigned int reserved2[2];
+	unsigned int cru_glb_cnt_th;
+	unsigned int reserved3[3];
+	unsigned int cru_glb_rst_st;
+	unsigned int reserved4[(0x1c0 - 0x150) / 4 - 1];
+	unsigned int cru_sdmmc_con[2];
+	unsigned int cru_sdio_con[2];
+	unsigned int reserved5[2];
+	unsigned int cru_emmc_con[2];
+	unsigned int reserved6[4];
+	unsigned int cru_pll_prg_en;
+};
+check_member(rk3128_cru, cru_pll_prg_en, 0x01f0);
+
+struct pll_div {
+	u32 refdiv;
+	u32 fbdiv;
+	u32 postdiv1;
+	u32 postdiv2;
+	u32 frac;
+};
+
+enum {
+	/* PLLCON0*/
+	PLL_POSTDIV1_SHIFT	= 12,
+	PLL_POSTDIV1_MASK	= 7 << PLL_POSTDIV1_SHIFT,
+	PLL_FBDIV_SHIFT		= 0,
+	PLL_FBDIV_MASK		= 0xfff,
+
+	/* PLLCON1 */
+	PLL_RST_SHIFT		= 14,
+	PLL_PD_SHIFT		= 13,
+	PLL_PD_MASK		= 1 << PLL_PD_SHIFT,
+	PLL_DSMPD_SHIFT		= 12,
+	PLL_DSMPD_MASK		= 1 << PLL_DSMPD_SHIFT,
+	PLL_LOCK_STATUS_SHIFT	= 10,
+	PLL_LOCK_STATUS_MASK	= 1 << PLL_LOCK_STATUS_SHIFT,
+	PLL_POSTDIV2_SHIFT	= 6,
+	PLL_POSTDIV2_MASK	= 7 << PLL_POSTDIV2_SHIFT,
+	PLL_REFDIV_SHIFT	= 0,
+	PLL_REFDIV_MASK		= 0x3f,
+
+	/* CRU_MODE */
+	GPLL_MODE_SHIFT		= 12,
+	GPLL_MODE_MASK		= 3 << GPLL_MODE_SHIFT,
+	GPLL_MODE_SLOW		= 0,
+	GPLL_MODE_NORM,
+	GPLL_MODE_DEEP,
+	CPLL_MODE_SHIFT		= 8,
+	CPLL_MODE_MASK		= 1 << CPLL_MODE_SHIFT,
+	CPLL_MODE_SLOW		= 0,
+	CPLL_MODE_NORM,
+	DPLL_MODE_SHIFT		= 4,
+	DPLL_MODE_MASK		= 1 << DPLL_MODE_SHIFT,
+	DPLL_MODE_SLOW		= 0,
+	DPLL_MODE_NORM,
+	APLL_MODE_SHIFT		= 0,
+	APLL_MODE_MASK		= 1 << APLL_MODE_SHIFT,
+	APLL_MODE_SLOW		= 0,
+	APLL_MODE_NORM,
+
+	/* CRU_CLK_SEL0_CON */
+	BUS_ACLK_PLL_SEL_SHIFT	= 14,
+	BUS_ACLK_PLL_SEL_MASK	= 3 << BUS_ACLK_PLL_SEL_SHIFT,
+	BUS_ACLK_PLL_SEL_CPLL	= 0,
+	BUS_ACLK_PLL_SEL_GPLL,
+	BUS_ACLK_PLL_SEL_GPLL_DIV2,
+	BUS_ACLK_PLL_SEL_GPLL_DIV3,
+	BUS_ACLK_DIV_SHIFT	= 8,
+	BUS_ACLK_DIV_MASK	= 0x1f << BUS_ACLK_DIV_SHIFT,
+	CORE_CLK_PLL_SEL_SHIFT	= 7,
+	CORE_CLK_PLL_SEL_MASK	= 1 << CORE_CLK_PLL_SEL_SHIFT,
+	CORE_CLK_PLL_SEL_APLL	= 0,
+	CORE_CLK_PLL_SEL_GPLL_DIV2,
+	CORE_DIV_CON_SHIFT	= 0,
+	CORE_DIV_CON_MASK	= 0x1f << CORE_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL1_CON */
+	BUS_PCLK_DIV_SHIFT	= 12,
+	BUS_PCLK_DIV_MASK	= 7 << BUS_PCLK_DIV_SHIFT,
+	BUS_HCLK_DIV_SHIFT	= 8,
+	BUS_HCLK_DIV_MASK	= 3 << BUS_HCLK_DIV_SHIFT,
+	CORE_ACLK_DIV_SHIFT	= 4,
+	CORE_ACLK_DIV_MASK	= 7 << CORE_ACLK_DIV_SHIFT,
+	CORE_PERI_DIV_SHIFT	= 0,
+	CORE_PERI_DIV_MASK	= 0xf << CORE_PERI_DIV_SHIFT,
+
+	/* CRU_CLK_SEL2_CON */
+	NANDC_PLL_SEL_SHIFT	= 14,
+	NANDC_PLL_SEL_MASK	= 3 << NANDC_PLL_SEL_SHIFT,
+	NANDC_PLL_SEL_CPLL	= 0,
+	NANDC_PLL_SEL_GPLL,
+	NANDC_CLK_DIV_SHIFT	= 8,
+	NANDC_CLK_DIV_MASK	= 0x1f << NANDC_CLK_DIV_SHIFT,
+	PVTM_CLK_DIV_SHIFT	= 0,
+	PVTM_CLK_DIV_MASK	= 0x3f << PVTM_CLK_DIV_SHIFT,
+
+	/* CRU_CLKSEL10_CON */
+	PERI_PLL_SEL_SHIFT	= 14,
+	PERI_PLL_SEL_MASK	= 1 << PERI_PLL_SEL_SHIFT,
+	PERI_PLL_APLL		= 0,
+	PERI_PLL_DPLL,
+	PERI_PLL_GPLL,
+	PERI_PCLK_DIV_SHIFT	= 12,
+	PERI_PCLK_DIV_MASK	= 3 << PERI_PCLK_DIV_SHIFT,
+	PERI_HCLK_DIV_SHIFT	= 8,
+	PERI_HCLK_DIV_MASK	= 3 << PERI_HCLK_DIV_SHIFT,
+	PERI_ACLK_DIV_SHIFT	= 0,
+	PERI_ACLK_DIV_MASK	= 0x1f << PERI_ACLK_DIV_SHIFT,
+
+	/* CRU_CLKSEL11_CON */
+	MMC0_PLL_SHIFT		= 6,
+	MMC0_PLL_MASK		= 3 << MMC0_PLL_SHIFT,
+	MMC0_SEL_APLL		= 0,
+	MMC0_SEL_GPLL,
+	MMC0_SEL_GPLL_DIV2,
+	MMC0_SEL_24M,
+	MMC0_DIV_SHIFT		= 0,
+	MMC0_DIV_MASK		= 0x3f << MMC0_DIV_SHIFT,
+
+	/* CRU_CLKSEL12_CON */
+	EMMC_PLL_SHIFT		= 14,
+	EMMC_PLL_MASK		= 3 << EMMC_PLL_SHIFT,
+	EMMC_SEL_APLL		= 0,
+	EMMC_SEL_GPLL,
+	EMMC_SEL_GPLL_DIV2,
+	EMMC_SEL_24M,
+	EMMC_DIV_SHIFT		= 8,
+	EMMC_DIV_MASK		= 0x3f << EMMC_DIV_SHIFT,
+
+	/* CLKSEL_CON24 */
+	SARADC_DIV_CON_SHIFT	= 8,
+	SARADC_DIV_CON_MASK	= GENMASK(15, 8),
+	SARADC_DIV_CON_WIDTH	= 8,
+
+	/* CRU_CLKSEL27_CON*/
+	DCLK_VOP_SEL_SHIFT         = 0,
+	DCLK_VOP_SEL_MASK          = 1 << DCLK_VOP_SEL_SHIFT,
+	DCLK_VOP_PLL_SEL_CPLL           = 0,
+	DCLK_VOP_DIV_CON_SHIFT          = 8,
+	DCLK_VOP_DIV_CON_MASK           = 0xff << DCLK_VOP_DIV_CON_SHIFT,
+
+	/* CRU_CLKSEL31_CON */
+	VIO0_PLL_SHIFT		= 5,
+	VIO0_PLL_MASK		= 7 << VIO0_PLL_SHIFT,
+	VI00_SEL_CPLL		= 0,
+	VIO0_SEL_GPLL,
+	VIO0_DIV_SHIFT		= 0,
+	VIO0_DIV_MASK		= 0x1f << VIO0_DIV_SHIFT,
+	VIO1_PLL_SHIFT		= 13,
+	VIO1_PLL_MASK		= 7 << VIO1_PLL_SHIFT,
+	VI01_SEL_CPLL		= 0,
+	VIO1_SEL_GPLL,
+	VIO1_DIV_SHIFT		= 8,
+	VIO1_DIV_MASK		= 0x1f << VIO1_DIV_SHIFT,
+
+	/* CRU_SOFTRST5_CON */
+	DDRCTRL_PSRST_SHIFT	= 11,
+	DDRCTRL_SRST_SHIFT	= 10,
+	DDRPHY_PSRST_SHIFT	= 9,
+	DDRPHY_SRST_SHIFT	= 8,
+};
+#endif
diff --git a/arch/arm/include/asm/arch-rockchip/grf_rk3128.h b/arch/arm/include/asm/arch-rockchip/grf_rk3128.h
new file mode 100644
index 0000000000..aa6b693520
--- /dev/null
+++ b/arch/arm/include/asm/arch-rockchip/grf_rk3128.h
@@ -0,0 +1,551 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+#ifndef _ASM_ARCH_GRF_RK3128_H
+#define _ASM_ARCH_GRF_RK3128_H
+
+#include <common.h>
+
+struct rk3128_grf {
+	unsigned int reserved[0x2a];
+	unsigned int gpio0a_iomux;
+	unsigned int gpio0b_iomux;
+	unsigned int gpio0c_iomux;
+	unsigned int gpio0d_iomux;
+	unsigned int gpio1a_iomux;
+	unsigned int gpio1b_iomux;
+	unsigned int gpio1c_iomux;
+	unsigned int gpio1d_iomux;
+	unsigned int gpio2a_iomux;
+	unsigned int gpio2b_iomux;
+	unsigned int gpio2c_iomux;
+	unsigned int gpio2d_iomux;
+	unsigned int gpio3a_iomux;
+	unsigned int gpio3b_iomux;
+	unsigned int gpio3c_iomux;
+	unsigned int gpio3d_iomux;
+	unsigned int gpio2c_iomux2;
+	unsigned int grf_cif_iomux;
+	unsigned int grf_cif_iomux1;
+	unsigned int reserved1[(0x118 - 0xf0) / 4 - 1];
+	unsigned int gpio0l_pull;
+	unsigned int gpio0h_pull;
+	unsigned int gpio1l_pull;
+	unsigned int gpio1h_pull;
+	unsigned int gpio2l_pull;
+	unsigned int gpio2h_pull;
+	unsigned int gpio3l_pull;
+	unsigned int gpio3h_pull;
+	unsigned int reserved2;
+	unsigned int soc_con0;
+	unsigned int soc_con1;
+	unsigned int soc_con2;
+	unsigned int soc_status0;
+	unsigned int reserved3[6];
+	unsigned int mac_con0;
+	unsigned int mac_con1;
+	unsigned int reserved4[4];
+	unsigned int uoc0_con0;
+	unsigned int reserved5;
+	unsigned int uoc1_con1;
+	unsigned int uoc1_con2;
+	unsigned int uoc1_con3;
+	unsigned int uoc1_con4;
+	unsigned int uoc1_con5;
+	unsigned int reserved6;
+	unsigned int ddrc_stat;
+	unsigned int reserved9;
+	unsigned int soc_status1;
+	unsigned int cpu_con0;
+	unsigned int cpu_con1;
+	unsigned int cpu_con2;
+	unsigned int cpu_con3;
+	unsigned int reserved10;
+	unsigned int reserved11;
+	unsigned int cpu_status0;
+	unsigned int cpu_status1;
+	unsigned int os_reg[8];
+	unsigned int reserved12[(0x280 - 0x1e4) / 4 - 1];
+	unsigned int usbphy0_con[8];
+	unsigned int usbphy1_con[8];
+	unsigned int uoc_status0;
+	unsigned int reserved13[(0x300 - 0x2c0) / 4 - 1];
+	unsigned int chip_tag;
+	unsigned int sdmmc_det_cnt;
+};
+check_member(rk3128_grf, sdmmc_det_cnt, 0x304);
+
+struct rk3128_pmu {
+	unsigned int wakeup_cfg;
+	unsigned int pwrdn_con;
+	unsigned int pwrdn_st;
+	unsigned int idle_req;
+	unsigned int idle_st;
+	unsigned int pwrmode_con;
+	unsigned int pwr_state;
+	unsigned int osc_cnt;
+	unsigned int core_pwrdwn_cnt;
+	unsigned int core_pwrup_cnt;
+	unsigned int sft_con;
+	unsigned int ddr_sref_st;
+	unsigned int int_con;
+	unsigned int int_st;
+	unsigned int sys_reg[4];
+};
+check_member(rk3128_pmu, int_st, 0x34);
+
+/* GRF_GPIO0A_IOMUX */
+enum {
+	GPIO0A7_SHIFT		= 14,
+	GPIO0A7_MASK		= 3 << GPIO0A7_SHIFT,
+	GPIO0A7_GPIO		= 0,
+	GPIO0A7_I2C3_SDA,
+
+	GPIO0A6_SHIFT		= 12,
+	GPIO0A6_MASK		= 3 << GPIO0A6_SHIFT,
+	GPIO0A6_GPIO		= 0,
+	GPIO0A6_I2C3_SCL,
+
+	GPIO0A3_SHIFT		= 6,
+	GPIO0A3_MASK		= 3 << GPIO0A3_SHIFT,
+	GPIO0A3_GPIO		= 0,
+	GPIO0A3_I2C1_SDA,
+
+	GPIO0A2_SHIFT		= 4,
+	GPIO0A2_MASK		= 1 << GPIO0A2_SHIFT,
+	GPIO0A2_GPIO		= 0,
+	GPIO0A2_I2C1_SCL,
+
+	GPIO0A1_SHIFT		= 2,
+	GPIO0A1_MASK		= 1 << GPIO0A1_SHIFT,
+	GPIO0A1_GPIO		= 0,
+	GPIO0A1_I2C0_SDA,
+
+	GPIO0A0_SHIFT		= 0,
+	GPIO0A0_MASK		= 1 << GPIO0A0_SHIFT,
+	GPIO0A0_GPIO		= 0,
+	GPIO0A0_I2C0_SCL,
+};
+
+/* GRF_GPIO0B_IOMUX */
+enum {
+	GPIO0B6_SHIFT		= 12,
+	GPIO0B6_MASK		= 3 << GPIO0B6_SHIFT,
+	GPIO0B6_GPIO		= 0,
+	GPIO0B6_I2S_SDI,
+	GPIO0B6_SPI_CSN0,
+
+	GPIO0B5_SHIFT		= 10,
+	GPIO0B5_MASK		= 3 << GPIO0B5_SHIFT,
+	GPIO0B5_GPIO		= 0,
+	GPIO0B5_I2S_SDO,
+	GPIO0B5_SPI_RXD,
+
+	GPIO0B4_SHIFT		= 8,
+	GPIO0B4_MASK		= 1 << GPIO0B4_SHIFT,
+	GPIO0B4_GPIO		= 0,
+	GPIO0B4_I2S_LRCKTX,
+
+	GPIO0B3_SHIFT		= 6,
+	GPIO0B3_MASK		= 3 << GPIO0B3_SHIFT,
+	GPIO0B3_GPIO		= 0,
+	GPIO0B3_I2S_LRCKRX,
+	GPIO0B3_SPI_TXD,
+
+	GPIO0B1_SHIFT		= 2,
+	GPIO0B1_MASK		= 3,
+	GPIO0B1_GPIO		= 0,
+	GPIO0B1_I2S_SCLK,
+	GPIO0B1_SPI_CLK,
+
+	GPIO0B0_SHIFT		= 0,
+	GPIO0B0_MASK		= 3,
+	GPIO0B0_GPIO		= 0,
+	GPIO0B0_I2S1_MCLK,
+};
+
+/* GRF_GPIO0D_IOMUX */
+enum {
+	GPIO0D4_SHIFT		= 8,
+	GPIO0D4_MASK		= 1 << GPIO0D4_SHIFT,
+	GPIO0D4_GPIO		= 0,
+	GPIO0D4_PWM2,
+
+	GPIO0D3_SHIFT		= 6,
+	GPIO0D3_MASK		= 1 << GPIO0D3_SHIFT,
+	GPIO0D3_GPIO		= 0,
+	GPIO0D3_PWM1,
+
+	GPIO0D2_SHIFT		= 4,
+	GPIO0D2_MASK		= 1 << GPIO0D2_SHIFT,
+	GPIO0D2_GPIO		= 0,
+	GPIO0D2_PWM0,
+
+	GPIO0D1_SHIFT		= 2,
+	GPIO0D1_MASK		= 1 << GPIO0D1_SHIFT,
+	GPIO0D1_GPIO		= 0,
+	GPIO0D1_UART2_CTSN,
+
+	GPIO0D0_SHIFT		= 0,
+	GPIO0D0_MASK		= 3 << GPIO0D0_SHIFT,
+	GPIO0D0_GPIO		= 0,
+	GPIO0D0_UART2_RTSN,
+	GPIO0D0_PMIC_SLEEP,
+};
+
+/* GRF_GPIO1A_IOMUX */
+enum {
+	GPIO1A5_SHIFT		= 10,
+	GPIO1A5_MASK		= 3 << GPIO1A5_SHIFT,
+	GPIO1A5_GPIO		= 0,
+	GPIO1A5_I2S_SDI,
+	GPIO1A5_SDMMC_DATA3,
+
+	GPIO1A4_SHIFT		= 8,
+	GPIO1A4_MASK		= 3 << GPIO1A4_SHIFT,
+	GPIO1A4_GPIO		= 0,
+	GPIO1A4_I2S_SD0,
+	GPIO1A4_SDMMC_DATA2,
+
+	GPIO1A3_SHIFT		= 6,
+	GPIO1A3_MASK		= 1 << GPIO1A3_SHIFT,
+	GPIO1A3_GPIO		= 0,
+	GPIO1A3_I2S_LRCKTX,
+
+	GPIO1A2_SHIFT		= 4,
+	GPIO1A2_MASK		= 3 << GPIO1A2_SHIFT,
+	GPIO1A2_GPIO		= 0,
+	GPIO1A2_I2S_LRCKRX,
+	GPIO1A2_SDMMC_DATA1,
+
+	GPIO1A1_SHIFT		= 2,
+	GPIO1A1_MASK		= 3 << GPIO1A1_SHIFT,
+	GPIO1A1_GPIO		= 0,
+	GPIO1A1_I2S_SCLK,
+	GPIO1A1_SDMMC_DATA0,
+	GPIO1A1_PMIC_SLEEP,
+
+	GPIO1A0_SHIFT		= 0,
+	GPIO1A0_MASK		= 3,
+	GPIO1A0_GPIO		= 0,
+	GPIO1A0_I2S_MCLK,
+	GPIO1A0_SDMMC_CLKOUT,
+	GPIO1A0_XIN32K,
+
+};
+
+/* GRF_GPIO1B_IOMUX */
+enum {
+	GPIO1B7_SHIFT		= 14,
+	GPIO1B7_MASK		= 1 << GPIO1B7_SHIFT,
+	GPIO1B7_GPIO		= 0,
+	GPIO1B7_MMC0_CMD,
+
+	GPIO1B6_SHIFT		= 12,
+	GPIO1B6_MASK		= 1 << GPIO1B6_SHIFT,
+	GPIO1B6_GPIO		= 0,
+	GPIO1B6_MMC_PWREN,
+
+	GPIO1B2_SHIFT		= 4,
+	GPIO1B2_MASK		= 3 << GPIO1B2_SHIFT,
+	GPIO1B2_GPIO		= 0,
+	GPIO1B2_SPI_RXD,
+	GPIO1B2_UART1_SIN,
+
+	GPIO1B1_SHIFT		= 2,
+	GPIO1B1_MASK		= 3 << GPIO1B1_SHIFT,
+	GPIO1B1_GPIO		= 0,
+	GPIO1B1_SPI_TXD,
+	GPIO1B1_UART1_SOUT,
+
+	GPIO1B0_SHIFT		= 0,
+	GPIO1B0_MASK		= 3 << GPIO1B0_SHIFT,
+	GPIO1B0_GPIO		= 0,
+	GPIO1B0_SPI_CLK,
+	GPIO1B0_UART1_CTSN
+};
+
+/* GRF_GPIO1C_IOMUX */
+enum {
+	GPIO1C6_SHIFT		= 12,
+	GPIO1C6_MASK		= 3 << GPIO1C6_SHIFT,
+	GPIO1C6_GPIO		= 0,
+	GPIO1C6_NAND_CS2,
+	GPIO1C6_EMMC_CMD,
+
+	GPIO1C5_SHIFT		= 10,
+	GPIO1C5_MASK		= 3 << GPIO1C5_SHIFT,
+	GPIO1C5_GPIO		= 0,
+	GPIO1C5_MMC0_D3,
+	GPIO1C5_JTAG_TMS,
+
+	GPIO1C4_SHIFT		= 8,
+	GPIO1C4_MASK		= 3 << GPIO1C4_SHIFT,
+	GPIO1C4_GPIO		= 0,
+	GPIO1C4_MMC0_D2,
+	GPIO1C4_JTAG_TCK,
+
+	GPIO1C3_SHIFT		= 6,
+	GPIO1C3_MASK		= 3 << GPIO1C3_SHIFT,
+	GPIO1C3_GPIO		= 0,
+	GPIO1C3_MMC0_D1,
+	GPIO1C3_UART2_RX,
+
+	GPIO1C2_SHIFT		= 4,
+	GPIO1C2_MASK		= 3 << GPIO1C2_SHIFT,
+	GPIO1C2_GPIO		= 0,
+	GPIO1C2_MMC0_D0,
+	GPIO1C2_UART2_TX,
+
+	GPIO1C1_SHIFT		= 2,
+	GPIO1C1_MASK		= 1 << GPIO1C1_SHIFT,
+	GPIO1C1_GPIO		= 0,
+	GPIO1C1_MMC0_DETN,
+
+	GPIO1C0_SHIFT		= 0,
+	GPIO1C0_MASK		= 1 << GPIO1C0_SHIFT,
+	GPIO1C0_GPIO		= 0,
+	GPIO1C0_MMC0_CLKOUT,
+};
+
+/* GRF_GPIO1D_IOMUX */
+enum {
+	GPIO1D7_SHIFT		= 14,
+	GPIO1D7_MASK		= 3 << GPIO1D7_SHIFT,
+	GPIO1D7_GPIO		= 0,
+	GPIO1D7_NAND_D7,
+	GPIO1D7_EMMC_D7,
+	GPIO1D7_SPI_CSN1,
+
+	GPIO1D6_SHIFT		= 12,
+	GPIO1D6_MASK		= 3 << GPIO1D6_SHIFT,
+	GPIO1D6_GPIO		= 0,
+	GPIO1D6_NAND_D6,
+	GPIO1D6_EMMC_D6,
+	GPIO1D6_SPI_CSN0,
+
+	GPIO1D5_SHIFT		= 10,
+	GPIO1D5_MASK		= 3 << GPIO1D5_SHIFT,
+	GPIO1D5_GPIO		= 0,
+	GPIO1D5_NAND_D5,
+	GPIO1D5_EMMC_D5,
+	GPIO1D5_SPI_TXD1,
+
+	GPIO1D4_SHIFT		= 8,
+	GPIO1D4_MASK		= 3 << GPIO1D4_SHIFT,
+	GPIO1D4_GPIO		= 0,
+	GPIO1D4_NAND_D4,
+	GPIO1D4_EMMC_D4,
+	GPIO1D4_SPI_RXD1,
+
+	GPIO1D3_SHIFT		= 6,
+	GPIO1D3_MASK		= 3 << GPIO1D3_SHIFT,
+	GPIO1D3_GPIO		= 0,
+	GPIO1D3_NAND_D3,
+	GPIO1D3_EMMC_D3,
+	GPIO1D3_SFC_SIO3,
+
+	GPIO1D2_SHIFT		= 4,
+	GPIO1D2_MASK		= 3 << GPIO1D2_SHIFT,
+	GPIO1D2_GPIO		= 0,
+	GPIO1D2_NAND_D2,
+	GPIO1D2_EMMC_D2,
+	GPIO1D2_SFC_SIO2,
+
+	GPIO1D1_SHIFT		= 2,
+	GPIO1D1_MASK		= 3 << GPIO1D1_SHIFT,
+	GPIO1D1_GPIO		= 0,
+	GPIO1D1_NAND_D1,
+	GPIO1D1_EMMC_D1,
+	GPIO1D1_SFC_SIO1,
+
+	GPIO1D0_SHIFT		= 0,
+	GPIO1D0_MASK		= 3 << GPIO1D0_SHIFT,
+	GPIO1D0_GPIO		= 0,
+	GPIO1D0_NAND_D0,
+	GPIO1D0_EMMC_D0,
+	GPIO1D0_SFC_SIO0,
+};
+
+/* GRF_GPIO2A_IOMUX */
+enum {
+	GPIO2A7_SHIFT		= 14,
+	GPIO2A7_MASK		= 3 << GPIO2A7_SHIFT,
+	GPIO2A7_GPIO		= 0,
+	GPIO2A7_NAND_DQS,
+	GPIO2A7_EMMC_CLKOUT,
+
+	GPIO2A6_SHIFT		= 12,
+	GPIO2A6_MASK		= 1 << GPIO2A6_SHIFT,
+	GPIO2A6_GPIO		= 0,
+	GPIO2A6_NAND_CS0,
+
+	GPIO2A5_SHIFT		= 10,
+	GPIO2A5_MASK		= 3 << GPIO2A5_SHIFT,
+	GPIO2A5_GPIO		= 0,
+	GPIO2A5_NAND_WP,
+	GPIO2A5_EMMC_PWREN,
+
+	GPIO2A4_SHIFT		= 8,
+	GPIO2A4_MASK		= 3 << GPIO2A4_SHIFT,
+	GPIO2A4_GPIO		= 0,
+	GPIO2A4_NAND_RDY,
+	GPIO2A4_EMMC_CMD,
+	GPIO2A3_SFC_CLK,
+
+	GPIO2A3_SHIFT		= 6,
+	GPIO2A3_MASK		= 3 << GPIO2A3_SHIFT,
+	GPIO2A3_GPIO		= 0,
+	GPIO2A3_NAND_RDN,
+	GPIO2A4_SFC_CSN1,
+
+	GPIO2A2_SHIFT		= 4,
+	GPIO2A2_MASK		= 3 << GPIO2A2_SHIFT,
+	GPIO2A2_GPIO		= 0,
+	GPIO2A2_NAND_WRN,
+	GPIO2A4_SFC_CSN0,
+
+	GPIO2A1_SHIFT		= 2,
+	GPIO2A1_MASK		= 3 << GPIO2A1_SHIFT,
+	GPIO2A1_GPIO		= 0,
+	GPIO2A1_NAND_CLE,
+	GPIO2A1_EMMC_CLKOUT,
+
+	GPIO2A0_SHIFT		= 0,
+	GPIO2A0_MASK		= 3 << GPIO2A0_SHIFT,
+	GPIO2A0_GPIO		= 0,
+	GPIO2A0_NAND_ALE,
+	GPIO2A0_SPI_CLK,
+};
+
+/* GRF_GPIO2B_IOMUX */
+enum {
+	GPIO2B7_SHIFT		= 14,
+	GPIO2B7_MASK		= 3 << GPIO2B7_SHIFT,
+	GPIO2B7_GPIO		= 0,
+	GPIO2B7_LCDC0_D13,
+	GPIO2B7_EBC_SDCE5,
+	GPIO2B7_GMAC_RXER,
+
+	GPIO2B6_SHIFT		= 12,
+	GPIO2B6_MASK		= 3 << GPIO2B6_SHIFT,
+	GPIO2B6_GPIO		= 0,
+	GPIO2B6_LCDC0_D12,
+	GPIO2B6_EBC_SDCE4,
+	GPIO2B6_GMAC_CLK,
+
+	GPIO2B5_SHIFT		= 10,
+	GPIO2B5_MASK		= 3 << GPIO2B5_SHIFT,
+	GPIO2B5_GPIO		= 0,
+	GPIO2B5_LCDC0_D11,
+	GPIO2B5_EBC_SDCE3,
+	GPIO2B5_GMAC_TXEN,
+
+	GPIO2B4_SHIFT		= 8,
+	GPIO2B4_MASK		= 3 << GPIO2B4_SHIFT,
+	GPIO2B4_GPIO		= 0,
+	GPIO2B4_LCDC0_D10,
+	GPIO2B4_EBC_SDCE2,
+	GPIO2B4_GMAC_MDIO,
+
+	GPIO2B3_SHIFT		= 6,
+	GPIO2B3_MASK		= 3 << GPIO2B3_SHIFT,
+	GPIO2B3_GPIO		= 0,
+	GPIO2B3_LCDC0_DEN,
+	GPIO2B3_EBC_GDCLK,
+	GPIO2B3_GMAC_RXCLK,
+
+	GPIO2B2_SHIFT		= 4,
+	GPIO2B2_MASK		= 3 << GPIO2B2_SHIFT,
+	GPIO2B2_GPIO		= 0,
+	GPIO2B2_LCDC0_VSYNC,
+	GPIO2B2_EBC_SDOE,
+	GPIO2B2_GMAC_CRS,
+
+	GPIO2B1_SHIFT		= 2,
+	GPIO2B1_MASK		= 3 << GPIO2B1_SHIFT,
+	GPIO2B1_GPIO		= 0,
+	GPIO2B1_LCDC0_HSYNC,
+	GPIO2B1_EBC_SDLE,
+	GPIO2B1_GMAC_TXCLK,
+
+	GPIO2B0_SHIFT		= 0,
+	GPIO2B0_MASK		= 3 << GPIO2B0_SHIFT,
+	GPIO2B0_GPIO		= 0,
+	GPIO2B0_LCDC0_DCLK,
+	GPIO2B0_EBC_SDCLK,
+	GPIO2B0_GMAC_RXDV,
+};
+
+/* GRF_GPIO2C_IOMUX */
+enum {
+	GPIO2C3_SHIFT		= 6,
+	GPIO2C3_MASK		= 3 << GPIO2C3_SHIFT,
+	GPIO2C3_GPIO		= 0,
+	GPIO2C3_LCDC0_D17,
+	GPIO2C3_EBC_GDPWR0,
+	GPIO2C3_GMAC_TXD0,
+
+	GPIO2C2_SHIFT		= 4,
+	GPIO2C2_MASK		= 3 << GPIO2C2_SHIFT,
+	GPIO2C2_GPIO		= 0,
+	GPIO2C2_LCDC0_D16,
+	GPIO2C2_EBC_GDSP,
+	GPIO2C2_GMAC_TXD1,
+
+	GPIO2C1_SHIFT		= 2,
+	GPIO2C1_MASK		= 3 << GPIO2C1_SHIFT,
+	GPIO2C1_GPIO		= 0,
+	GPIO2C1_LCDC0_D15,
+	GPIO2C1_EBC_GDOE,
+	GPIO2C1_GMAC_RXD0,
+
+	GPIO2C0_SHIFT		= 0,
+	GPIO2C0_MASK		= 3 << GPIO2C0_SHIFT,
+	GPIO2C0_GPIO		= 0,
+	GPIO2C0_LCDC0_D14,
+	GPIO2C0_EBC_VCOM,
+	GPIO2C0_GMAC_RXD1,
+};
+
+/* GRF_GPIO2D_IOMUX */
+enum {
+	GPIO2D6_SHIFT		= 12,
+	GPIO2D6_MASK		= 3 << GPIO2D6_SHIFT,
+	GPIO2D6_GPIO		= 0,
+	GPIO2D6_LCDC0_D22,
+	GPIO2D6_GMAC_COL	= 4,
+
+	GPIO2D1_SHIFT		= 2,
+	GPIO2D1_MASK		= 3 << GPIO2D1_SHIFT,
+	GPIO2D1_GPIO		= 0,
+	GPIO2D1_GMAC_MDC	= 3,
+};
+
+/* GRF_GPIO2C_IOMUX2 */
+enum {
+	GPIO2C7_SHIFT		= 12,
+	GPIO2C7_MASK		= 7 << GPIO2C7_SHIFT,
+	GPIO2C7_GPIO		= 0,
+	GPIO2C7_GMAC_TXD3	= 4,
+
+	GPIO2C6_SHIFT		= 12,
+	GPIO2C6_MASK		= 7 << GPIO2C6_SHIFT,
+	GPIO2C6_GPIO		= 0,
+	GPIO2C6_GMAC_TXD2	= 4,
+
+	GPIO2C5_SHIFT		= 4,
+	GPIO2C5_MASK		= 7 << GPIO2C5_SHIFT,
+	GPIO2C5_GPIO		= 0,
+	GPIO2C5_I2C2_SCL	= 3,
+	GPIO2C5_GMAC_RXD2,
+
+	GPIO2C4_SHIFT		= 0,
+	GPIO2C4_MASK		= 7 << GPIO2C4_SHIFT,
+	GPIO2C4_GPIO		= 0,
+	GPIO2C4_I2C2_SDA	= 3,
+	GPIO2C4_GMAC_RXD2,
+};
+#endif
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index a26736a5ac..1e74db3607 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -11,6 +11,15 @@ config ROCKCHIP_RK3036
 	  and video codec support. Peripherals include Gigabit Ethernet,
 	  USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.
 
+config ROCKCHIP_RK3128
+	bool "Support Rockchip RK3128"
+	select CPU_V7
+	help
+	  The Rockchip RK3128 is a ARM-based SoC with a quad-core Cortex-A7
+	  including NEON and GPU, Mali-400 graphics, several DDR3 options
+	  and video codec support. Peripherals include Gigabit Ethernet,
+	  USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.
+
 config ROCKCHIP_RK3188
 	bool "Support Rockchip RK3188"
 	select CPU_V7
@@ -211,6 +220,7 @@ config SPL_MMC_SUPPORT
 	default y if !SPL_ROCKCHIP_BACK_TO_BROM
 
 source "arch/arm/mach-rockchip/rk3036/Kconfig"
+source "arch/arm/mach-rockchip/rk3128/Kconfig"
 source "arch/arm/mach-rockchip/rk3188/Kconfig"
 source "arch/arm/mach-rockchip/rk322x/Kconfig"
 source "arch/arm/mach-rockchip/rk3288/Kconfig"
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 7e1f864383..e1b0519b1f 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -30,6 +30,7 @@ ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
 obj-y += boot_mode.o
 
 obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board.o
+obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128-board.o
 obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board.o
 obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board.o
 obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board.o
@@ -43,6 +44,7 @@ obj-y += rk_timer.o
 endif
 
 obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/
+obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/
 ifndef CONFIG_TPL_BUILD
 obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/
 endif
diff --git a/arch/arm/mach-rockchip/rk3036/sdram_rk3036.c b/arch/arm/mach-rockchip/rk3036/sdram_rk3036.c
index 460dd6074e..e5393ec50a 100644
--- a/arch/arm/mach-rockchip/rk3036/sdram_rk3036.c
+++ b/arch/arm/mach-rockchip/rk3036/sdram_rk3036.c
@@ -34,10 +34,11 @@ struct rk3036_sdram_priv {
 	struct rk3036_ddr_config ddr_config;
 };
 
-/* use integer mode, 396MHz dpll setting
+/*
+ * use integer mode, dpll output 792MHz and ddr get 396MHz
  * refdiv, fbdiv, postdiv1, postdiv2
  */
-const struct pll_div dpll_init_cfg = {1, 50, 3, 1};
+const struct pll_div dpll_init_cfg = {1, 66, 2, 1};
 
 /* 396Mhz ddr timing */
 const struct rk3036_ddr_timing ddr_timing = {0x18c,
@@ -329,29 +330,26 @@ static void rkdclk_init(struct rk3036_sdram_priv *priv)
 	struct rk3036_pll *pll = &priv->cru->pll[1];
 
 	/* pll enter slow-mode */
-	rk_clrsetreg(&priv->cru->cru_mode_con,
-		     DPLL_MODE_MASK << DPLL_MODE_SHIFT,
+	rk_clrsetreg(&priv->cru->cru_mode_con, DPLL_MODE_MASK,
 		     DPLL_MODE_SLOW << DPLL_MODE_SHIFT);
 
 	/* use integer mode */
-	rk_clrreg(&pll->con1, 1 << PLL_DSMPD_SHIFT);
+	rk_setreg(&pll->con1, 1 << PLL_DSMPD_SHIFT);
 
 	rk_clrsetreg(&pll->con0,
-		     PLL_POSTDIV1_MASK << PLL_POSTDIV1_SHIFT | PLL_FBDIV_MASK,
+		     PLL_POSTDIV1_MASK | PLL_FBDIV_MASK,
 		     (dpll_init_cfg.postdiv1 << PLL_POSTDIV1_SHIFT) |
 			dpll_init_cfg.fbdiv);
-	rk_clrsetreg(&pll->con1, PLL_POSTDIV2_MASK << PLL_POSTDIV2_SHIFT |
-			PLL_REFDIV_MASK << PLL_REFDIV_SHIFT,
-			(dpll_init_cfg.postdiv2 << PLL_POSTDIV2_SHIFT |
-			 dpll_init_cfg.refdiv << PLL_REFDIV_SHIFT));
+	rk_clrsetreg(&pll->con1, PLL_POSTDIV2_MASK | PLL_REFDIV_MASK,
+		     (dpll_init_cfg.postdiv2 << PLL_POSTDIV2_SHIFT |
+		      dpll_init_cfg.refdiv << PLL_REFDIV_SHIFT));
 
 	/* waiting for pll lock */
 	while (readl(&pll->con1) & (1 << PLL_LOCK_STATUS_SHIFT))
 		rockchip_udelay(1);
 
 	/* PLL enter normal-mode */
-	rk_clrsetreg(&priv->cru->cru_mode_con,
-		     DPLL_MODE_MASK << DPLL_MODE_SHIFT,
+	rk_clrsetreg(&priv->cru->cru_mode_con, DPLL_MODE_MASK,
 		     DPLL_MODE_NORM << DPLL_MODE_SHIFT);
 }
 
diff --git a/arch/arm/mach-rockchip/rk3128-board.c b/arch/arm/mach-rockchip/rk3128-board.c
new file mode 100644
index 0000000000..2e8393d70a
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3128-board.c
@@ -0,0 +1,127 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <ram.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/grf_rk3128.h>
+#include <asm/arch/boot_mode.h>
+#include <asm/arch/timer.h>
+#include <power/regulator.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+__weak int rk_board_late_init(void)
+{
+	return 0;
+}
+
+int board_late_init(void)
+{
+	setup_boot_mode();
+
+	return rk_board_late_init();
+}
+
+int board_init(void)
+{
+	int ret = 0;
+
+	rockchip_timer_init();
+
+	ret = regulators_enable_boot_on(false);
+	if (ret) {
+		debug("%s: Cannot enable boot on regulator\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = 0x8400000;
+	/* Reserve 0xe00000(14MB) for OPTEE with TA enabled, otherwise 2MB */
+	gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE
+				+ gd->bd->bi_dram[0].size + 0xe00000;
+	gd->bd->bi_dram[1].size = gd->bd->bi_dram[0].start
+				+ gd->ram_size - gd->bd->bi_dram[1].start;
+
+	return 0;
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
+
+#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
+#include <usb.h>
+#include <usb/dwc2_udc.h>
+
+static struct dwc2_plat_otg_data rk3128_otg_data = {
+	.rx_fifo_sz	= 512,
+	.np_tx_fifo_sz	= 16,
+	.tx_fifo_sz	= 128,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	int node;
+	const char *mode;
+	bool matched = false;
+	const void *blob = gd->fdt_blob;
+
+	/* find the usb_otg node */
+	node = fdt_node_offset_by_compatible(blob, -1,
+					     "rockchip,rk3128-usb");
+
+	while (node > 0) {
+		mode = fdt_getprop(blob, node, "dr_mode", NULL);
+		if (mode && strcmp(mode, "otg") == 0) {
+			matched = true;
+			break;
+		}
+
+		node = fdt_node_offset_by_compatible(blob, node,
+						     "rockchip,rk3128-usb");
+	}
+	if (!matched) {
+		debug("Not found usb_otg device\n");
+		return -ENODEV;
+	}
+	rk3128_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
+
+	return dwc2_udc_probe(&rk3128_otg_data);
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_USB_FUNCTION_FASTBOOT)
+int fb_set_reboot_flag(void)
+{
+	struct rk3128_grf *grf;
+
+	printf("Setting reboot to fastboot flag ...\n");
+	grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+	/* Set boot mode to fastboot */
+	writel(BOOT_FASTBOOT, &grf->os_reg[0]);
+
+	return 0;
+}
+#endif
diff --git a/arch/arm/mach-rockchip/rk3128/Kconfig b/arch/arm/mach-rockchip/rk3128/Kconfig
new file mode 100644
index 0000000000..40655a22b5
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3128/Kconfig
@@ -0,0 +1,24 @@
+if ROCKCHIP_RK3128
+
+choice
+	prompt "RK3128 board select"
+
+config TARGET_EVB_RK3128
+	bool "RK3128 evaluation board"
+	select BOARD_LATE_INIT
+	help
+	  RK3128evb is a evaluation board for Rockchip rk3128,
+	  with full function and phisical connectors support like
+	  usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial...
+
+endchoice
+
+config SYS_SOC
+	default "rockchip"
+
+config SYS_MALLOC_F_LEN
+	default 0x0800
+
+source "board/rockchip/evb_rk3128/Kconfig"
+
+endif
diff --git a/arch/arm/mach-rockchip/rk3128/Makefile b/arch/arm/mach-rockchip/rk3128/Makefile
new file mode 100644
index 0000000000..50e1117542
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3128/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2017 Rockchip Electronics Co., Ltd
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y += rk3128.o
+obj-y += syscon_rk3128.o
+obj-y += clk_rk3128.o
diff --git a/arch/arm/mach-rockchip/rk3128/clk_rk3128.c b/arch/arm/mach-rockchip/rk3128/clk_rk3128.c
new file mode 100644
index 0000000000..7ca5fd3484
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3128/clk_rk3128.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cru_rk3128.h>
+
+int rockchip_get_clk(struct udevice **devp)
+{
+	return uclass_get_device_by_driver(UCLASS_CLK,
+			DM_GET_DRIVER(rockchip_rk3128_cru), devp);
+}
+
+void *rockchip_get_cru(void)
+{
+	struct rk3128_clk_priv *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = rockchip_get_clk(&dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	priv = dev_get_priv(dev);
+
+	return priv->cru;
+}
diff --git a/arch/arm/mach-rockchip/rk3128/rk3128.c b/arch/arm/mach-rockchip/rk3128/rk3128.c
new file mode 100644
index 0000000000..9d6e3b1ee1
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3128/rk3128.c
@@ -0,0 +1,12 @@
+/*
+ * Copyright (c) 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+int arch_cpu_init(void)
+{
+	/* We do some SoC one time setting here. */
+
+	return 0;
+}
diff --git a/arch/arm/mach-rockchip/rk3128/syscon_rk3128.c b/arch/arm/mach-rockchip/rk3128/syscon_rk3128.c
new file mode 100644
index 0000000000..0b636390ac
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3128/syscon_rk3128.c
@@ -0,0 +1,21 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch/clock.h>
+
+static const struct udevice_id rk3128_syscon_ids[] = {
+	{ .compatible = "rockchip,rk3128-grf", .data = ROCKCHIP_SYSCON_GRF },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_rk3128) = {
+	.name = "rk3128_syscon",
+	.id = UCLASS_SYSCON,
+	.of_match = rk3128_syscon_ids,
+};
diff --git a/board/rockchip/evb_rk3128/Kconfig b/board/rockchip/evb_rk3128/Kconfig
new file mode 100644
index 0000000000..5b3095ade9
--- /dev/null
+++ b/board/rockchip/evb_rk3128/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_EVB_RK3128
+
+config SYS_BOARD
+	default "evb_rk3128"
+
+config SYS_VENDOR
+	default "rockchip"
+
+config SYS_CONFIG_NAME
+	default "evb_rk3128"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+
+endif
diff --git a/board/rockchip/evb_rk3128/MAINTAINERS b/board/rockchip/evb_rk3128/MAINTAINERS
new file mode 100644
index 0000000000..f5145d1f04
--- /dev/null
+++ b/board/rockchip/evb_rk3128/MAINTAINERS
@@ -0,0 +1,6 @@
+EVB-RK3128
+M:      Kever Yang <kever.yang@rock-chips.com>
+S:      Maintained
+F:      board/rockchip/evb_rk3128
+F:      include/configs/evb_rk3128.h
+F:      configs/evb-rk3128_defconfig
diff --git a/board/rockchip/evb_rk3128/Makefile b/board/rockchip/evb_rk3128/Makefile
new file mode 100644
index 0000000000..078bb898c6
--- /dev/null
+++ b/board/rockchip/evb_rk3128/Makefile
@@ -0,0 +1,5 @@
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y	+= evk-rk3128.o
diff --git a/board/rockchip/evb_rk3128/evk-rk3128.c b/board/rockchip/evb_rk3128/evk-rk3128.c
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/board/rockchip/evb_rk3128/evk-rk3128.c
diff --git a/board/rockchip/evb_rv1108/README b/board/rockchip/evb_rv1108/README
index 58895960e9..79a97c3138 100644
--- a/board/rockchip/evb_rv1108/README
+++ b/board/rockchip/evb_rv1108/README
@@ -3,12 +3,11 @@ Here is the step-by-step to boot U-Boot on rv1108 evb.
 Get ddr init binary
 ==============================================================================
   > git clone  https://github.com/rockchip-linux/rkbin.git
-  > dd if=./rkbin/rv1x/rv1108ddr.bin of=ddr.bin bs=4 skip=1
 
 Compile  U-Boot
 ===========================
   > make CROSS_COMPILE=arm-linux-gnueabi- evb-rv1108_defconfig  all
-  > ./tools/mkimage  -n rv1108 -T rksd -d ddr.bin spl.bin
+  > ./tools/mkimage  -n rv1108 -T rksd -d ../rkbin/rv1x/rv1108ddr_v1.00.bin spl.bin
   > cat spl.bin u-boot.bin > u-boot.img
 
 Flash the image by rkdeveloptool
@@ -16,7 +15,7 @@ Flash the image by rkdeveloptool
 rkdeveloptool can get from https://github.com/rockchip-linux/rkdeveloptool.git
 
 Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then:
-  > rkdeveloptool db ./rkbin/rv1x/RV1108_usb_boot.bin
+  > rkdeveloptool db ./rkbin/rv1x/rv1108usbboot_v1.00.bin
   > rkdeveloptool wl 0x40 u-boot.img
   > rkdeveloptool RD
 
diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
index 2b4988e2d2..0ad267cdd0 100644
--- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c
+++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
@@ -7,12 +7,16 @@
 #include <common.h>
 #include <dm.h>
 #include <misc.h>
+#include <spl.h>
+#include <usb.h>
 #include <dm/pinctrl.h>
 #include <dm/uclass-internal.h>
+#include <asm/gpio.h>
 #include <asm/setup.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cru_rk3399.h>
 #include <asm/arch/periph.h>
 #include <power/regulator.h>
-#include <spl.h>
 #include <u-boot/sha256.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -32,9 +36,50 @@ int board_init(void)
 	return 0;
 }
 
+static void rk3399_force_power_on_reset(void)
+{
+	ofnode node;
+	struct gpio_desc sysreset_gpio;
+
+	debug("%s: trying to force a power-on reset\n", __func__);
+
+	node = ofnode_path("/config");
+	if (!ofnode_valid(node)) {
+		debug("%s: no /config node?\n", __func__);
+		return;
+	}
+
+	if (gpio_request_by_name_nodev(node, "sysreset-gpio", 0,
+				       &sysreset_gpio, GPIOD_IS_OUT)) {
+		debug("%s: could not find a /config/sysreset-gpio\n", __func__);
+		return;
+	}
+
+	dm_gpio_set_value(&sysreset_gpio, 1);
+}
+
 void spl_board_init(void)
 {
 	int  ret;
+	struct rk3399_cru *cru = rockchip_get_cru();
+
+	/*
+	 * The RK3399 resets only 'almost all logic' (see also in the TRM
+	 * "3.9.4 Global software reset"), when issuing a software reset.
+	 * This may cause issues during boot-up for some configurations of
+	 * the application software stack.
+	 *
+	 * To work around this, we test whether the last reset reason was
+	 * a power-on reset and (if not) issue an overtemp-reset to reset
+	 * the entire module.
+	 *
+	 * While this was previously fixed by modifying the various places
+	 * that could generate a software reset (e.g. U-Boot's sysreset
+	 * driver, the ATF or Linux), we now have it here to ensure that
+	 * we no longer have to track this through the various components.
+	 */
+	if (cru->glb_rst_st != 0)
+		rk3399_force_power_on_reset();
 
 	/*
 	 * Turning the eMMC and SPI back on (if disabled via the Qseven
@@ -158,3 +203,70 @@ void get_board_serial(struct tag_serialnr *serialnr)
 	serialnr->low = (u32)(serial & 0xffffffff);
 }
 #endif
+
+/**
+ * Switch power at an external regulator (for our root hub).
+ *
+ * @param ctrl pointer to the xHCI controller
+ * @param port port number as in the control message (one-based)
+ * @param enable boolean indicating whether to enable or disable power
+ * @return returns 0 on success, an error-code on failure
+ */
+static int board_usb_port_power_set(struct udevice *dev, int port,
+				    bool enable)
+{
+#if CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(DM_REGULATOR)
+	/* We start counting ports at 0, while USB counts from 1. */
+	int index = port - 1;
+	const char *regname = NULL;
+	struct udevice *regulator;
+	const char *prop = "tsd,usb-port-power";
+	int ret;
+
+	debug("%s: ctrl '%s' port %d enable %s\n", __func__,
+	      dev_read_name(dev), port, enable ? "true" : "false");
+
+	ret = dev_read_string_index(dev, prop, index, &regname);
+	if (ret < 0) {
+		debug("%s: ctrl '%s' port %d: no entry in '%s'\n",
+		      __func__, dev_read_name(dev), port, prop);
+		return ret;
+	}
+
+	ret = regulator_get_by_platname(regname, &regulator);
+	if (ret) {
+		debug("%s: ctrl '%s' port %d: could not get regulator '%s'\n",
+		      __func__, dev_read_name(dev), port, regname);
+		return ret;
+	}
+
+	regulator_set_enable(regulator, enable);
+	return 0;
+#else
+	return -ENOTSUPP;
+#endif
+}
+
+void usb_hub_reset_devices(struct usb_hub_device *hub, int port)
+{
+	struct udevice *dev = hub->pusb_dev->dev;
+	struct udevice *ctrl;
+
+	/* We are only interested in our root-hubs */
+	if (usb_hub_is_root_hub(dev) == false)
+		return;
+
+	ctrl = usb_get_bus(dev);
+	if (!ctrl) {
+		debug("%s: could not retrieve ctrl for hub\n", __func__);
+		return;
+	}
+
+	/*
+	 * To work around an incompatibility between the single-threaded
+	 * USB stack in U-Boot and (a strange low-power mode of) the USB
+	 * hub we have on-module, we need to delay powering on the hub
+	 * until the first time the port is probed.
+	 */
+	board_usb_port_power_set(ctrl, port, true);
+}
diff --git a/configs/evb-rk3128_defconfig b/configs/evb-rk3128_defconfig
new file mode 100644
index 0000000000..7c2a607e90
--- /dev/null
+++ b/configs/evb-rk3128_defconfig
@@ -0,0 +1,56 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ROCKCHIP_RK3128=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3128-evb"
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_CMD_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x60800800
+CONFIG_FASTBOOT_BUF_SIZE=0x04000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_PHY=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ROCKCHIP_RK3128=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_RAM=y
+CONFIG_DM_RESET=y
+CONFIG_DEBUG_UART_BASE=0x20068000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Rockchip"
+CONFIG_G_DNL_VENDOR_NUM=0x2207
+CONFIG_G_DNL_PRODUCT_NUM=0x310c
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
diff --git a/doc/device-tree-bindings/config.txt b/doc/device-tree-bindings/config.txt
index 15e4349c19..6cdc16da5b 100644
--- a/doc/device-tree-bindings/config.txt
+++ b/doc/device-tree-bindings/config.txt
@@ -46,3 +46,9 @@ u-boot,spl-payload-offset
 	If present (and SPL is controlled by the device-tree), this allows
 	to override the CONFIG_SYS_SPI_U_BOOT_OFFS setting using a value
 	from the device-tree.
+
+sysreset-gpio
+	If present (and supported by the specific board), indicates a
+	GPIO that can be set to trigger a system reset.  It is assumed
+	that such a system reset will effect a complete platform reset,
+	being roughly equivalent to a power-on reset.
diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
index c50aff2e93..eae0ef6a9f 100644
--- a/drivers/clk/rockchip/Makefile
+++ b/drivers/clk/rockchip/Makefile
@@ -1,10 +1,11 @@
 #
-# Copyright (c) 2016 Google, Inc
+# Copyright (c) 2017 Rockchip Electronics Co., Ltd
 #
 # SPDX-License-Identifier:      GPL-2.0+
 #
 
 obj-$(CONFIG_ROCKCHIP_RK3036) += clk_rk3036.o
+obj-$(CONFIG_ROCKCHIP_RK3128) += clk_rk3128.o
 obj-$(CONFIG_ROCKCHIP_RK3188) += clk_rk3188.o
 obj-$(CONFIG_ROCKCHIP_RK322X) += clk_rk322x.o
 obj-$(CONFIG_ROCKCHIP_RK3288) += clk_rk3288.o
diff --git a/drivers/clk/rockchip/clk_rk3128.c b/drivers/clk/rockchip/clk_rk3128.c
new file mode 100644
index 0000000000..132d50dda3
--- /dev/null
+++ b/drivers/clk/rockchip/clk_rk3128.c
@@ -0,0 +1,596 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cru_rk3128.h>
+#include <asm/arch/hardware.h>
+#include <bitfield.h>
+#include <dm/lists.h>
+#include <dt-bindings/clock/rk3128-cru.h>
+#include <linux/log2.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+	VCO_MAX_HZ	= 2400U * 1000000,
+	VCO_MIN_HZ	= 600 * 1000000,
+	OUTPUT_MAX_HZ	= 2400U * 1000000,
+	OUTPUT_MIN_HZ	= 24 * 1000000,
+};
+
+#define DIV_TO_RATE(input_rate, div)	((input_rate) / ((div) + 1))
+
+#define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\
+	.refdiv = _refdiv,\
+	.fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ),\
+	.postdiv1 = _postdiv1, .postdiv2 = _postdiv2};
+
+/* use integer mode*/
+static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 3, 1);
+static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1);
+
+static int rkclk_set_pll(struct rk3128_cru *cru, enum rk_clk_id clk_id,
+			 const struct pll_div *div)
+{
+	int pll_id = rk_pll_id(clk_id);
+	struct rk3128_pll *pll = &cru->pll[pll_id];
+
+	/* All PLLs have same VCO and output frequency range restrictions. */
+	uint vco_hz = OSC_HZ / 1000 * div->fbdiv / div->refdiv * 1000;
+	uint output_hz = vco_hz / div->postdiv1 / div->postdiv2;
+
+	debug("PLL at %p:fd=%d,rd=%d,pd1=%d,pd2=%d,vco=%uHz,output=%uHz\n",
+	      pll, div->fbdiv, div->refdiv, div->postdiv1,
+	      div->postdiv2, vco_hz, output_hz);
+	assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ &&
+	       output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ);
+
+	/* use integer mode */
+	rk_setreg(&pll->con1, 1 << PLL_DSMPD_SHIFT);
+	/* Power down */
+	rk_setreg(&pll->con1, 1 << PLL_PD_SHIFT);
+
+	rk_clrsetreg(&pll->con0,
+		     PLL_POSTDIV1_MASK | PLL_FBDIV_MASK,
+		     (div->postdiv1 << PLL_POSTDIV1_SHIFT) | div->fbdiv);
+	rk_clrsetreg(&pll->con1, PLL_POSTDIV2_MASK | PLL_REFDIV_MASK,
+		     (div->postdiv2 << PLL_POSTDIV2_SHIFT |
+		     div->refdiv << PLL_REFDIV_SHIFT));
+
+	/* Power Up */
+	rk_clrreg(&pll->con1, 1 << PLL_PD_SHIFT);
+
+	/* waiting for pll lock */
+	while (readl(&pll->con1) & (1 << PLL_LOCK_STATUS_SHIFT))
+		udelay(1);
+
+	return 0;
+}
+
+static int pll_para_config(u32 freq_hz, struct pll_div *div)
+{
+	u32 ref_khz = OSC_HZ / 1000, refdiv, fbdiv = 0;
+	u32 postdiv1, postdiv2 = 1;
+	u32 fref_khz;
+	u32 diff_khz, best_diff_khz;
+	const u32 max_refdiv = 63, max_fbdiv = 3200, min_fbdiv = 16;
+	const u32 max_postdiv1 = 7, max_postdiv2 = 7;
+	u32 vco_khz;
+	u32 freq_khz = freq_hz / 1000;
+
+	if (!freq_hz) {
+		printf("%s: the frequency can't be 0 Hz\n", __func__);
+		return -1;
+	}
+
+	postdiv1 = DIV_ROUND_UP(VCO_MIN_HZ / 1000, freq_khz);
+	if (postdiv1 > max_postdiv1) {
+		postdiv2 = DIV_ROUND_UP(postdiv1, max_postdiv1);
+		postdiv1 = DIV_ROUND_UP(postdiv1, postdiv2);
+	}
+
+	vco_khz = freq_khz * postdiv1 * postdiv2;
+
+	if (vco_khz < (VCO_MIN_HZ / 1000) || vco_khz > (VCO_MAX_HZ / 1000) ||
+	    postdiv2 > max_postdiv2) {
+		printf("%s: Cannot find out a supported VCO for Freq (%uHz)\n",
+		       __func__, freq_hz);
+		return -1;
+	}
+
+	div->postdiv1 = postdiv1;
+	div->postdiv2 = postdiv2;
+
+	best_diff_khz = vco_khz;
+	for (refdiv = 1; refdiv < max_refdiv && best_diff_khz; refdiv++) {
+		fref_khz = ref_khz / refdiv;
+
+		fbdiv = vco_khz / fref_khz;
+		if ((fbdiv >= max_fbdiv) || (fbdiv <= min_fbdiv))
+			continue;
+		diff_khz = vco_khz - fbdiv * fref_khz;
+		if (fbdiv + 1 < max_fbdiv && diff_khz > fref_khz / 2) {
+			fbdiv++;
+			diff_khz = fref_khz - diff_khz;
+		}
+
+		if (diff_khz >= best_diff_khz)
+			continue;
+
+		best_diff_khz = diff_khz;
+		div->refdiv = refdiv;
+		div->fbdiv = fbdiv;
+	}
+
+	if (best_diff_khz > 4 * (1000)) {
+		printf("%s: Failed to match output frequency %u bestis %u Hz\n",
+		       __func__, freq_hz,
+		       best_diff_khz * 1000);
+		return -1;
+	}
+	return 0;
+}
+
+static void rkclk_init(struct rk3128_cru *cru)
+{
+	u32 aclk_div;
+	u32 hclk_div;
+	u32 pclk_div;
+
+	/* pll enter slow-mode */
+	rk_clrsetreg(&cru->cru_mode_con,
+		     GPLL_MODE_MASK | APLL_MODE_MASK,
+		     GPLL_MODE_SLOW << GPLL_MODE_SHIFT |
+		     APLL_MODE_SLOW << APLL_MODE_SHIFT);
+
+	/* init pll */
+	rkclk_set_pll(cru, CLK_ARM, &apll_init_cfg);
+	rkclk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg);
+
+	/*
+	 * select apll as cpu/core clock pll source and
+	 * set up dependent divisors for PERI and ACLK clocks.
+	 * core hz : apll = 1:1
+	 */
+	aclk_div = APLL_HZ / CORE_ACLK_HZ - 1;
+	assert((aclk_div + 1) * CORE_ACLK_HZ == APLL_HZ && aclk_div < 0x7);
+
+	pclk_div = APLL_HZ / CORE_PERI_HZ - 1;
+	assert((pclk_div + 1) * CORE_PERI_HZ == APLL_HZ && pclk_div < 0xf);
+
+	rk_clrsetreg(&cru->cru_clksel_con[0],
+		     CORE_CLK_PLL_SEL_MASK | CORE_DIV_CON_MASK,
+		     CORE_CLK_PLL_SEL_APLL << CORE_CLK_PLL_SEL_SHIFT |
+		     0 << CORE_DIV_CON_SHIFT);
+
+	rk_clrsetreg(&cru->cru_clksel_con[1],
+		     CORE_ACLK_DIV_MASK | CORE_PERI_DIV_MASK,
+		     aclk_div << CORE_ACLK_DIV_SHIFT |
+		     pclk_div << CORE_PERI_DIV_SHIFT);
+
+	/*
+	 * select gpll as pd_bus bus clock source and
+	 * set up dependent divisors for PCLK/HCLK and ACLK clocks.
+	 */
+	aclk_div = GPLL_HZ / BUS_ACLK_HZ - 1;
+	assert((aclk_div + 1) * BUS_ACLK_HZ == GPLL_HZ && aclk_div <= 0x1f);
+
+	pclk_div = BUS_ACLK_HZ / BUS_PCLK_HZ - 1;
+	assert((pclk_div + 1) * BUS_PCLK_HZ == BUS_ACLK_HZ && pclk_div <= 0x7);
+
+	hclk_div = BUS_ACLK_HZ / BUS_HCLK_HZ - 1;
+	assert((hclk_div + 1) * BUS_HCLK_HZ == BUS_ACLK_HZ && hclk_div <= 0x3);
+
+	rk_clrsetreg(&cru->cru_clksel_con[0],
+		     BUS_ACLK_PLL_SEL_MASK | BUS_ACLK_DIV_MASK,
+		     BUS_ACLK_PLL_SEL_GPLL << BUS_ACLK_PLL_SEL_SHIFT |
+		     aclk_div << BUS_ACLK_DIV_SHIFT);
+
+	rk_clrsetreg(&cru->cru_clksel_con[1],
+		     BUS_PCLK_DIV_MASK | BUS_HCLK_DIV_MASK,
+		     pclk_div << BUS_PCLK_DIV_SHIFT |
+		     hclk_div << BUS_HCLK_DIV_SHIFT);
+
+	/*
+	 * select gpll as pd_peri bus clock source and
+	 * set up dependent divisors for PCLK/HCLK and ACLK clocks.
+	 */
+	aclk_div = GPLL_HZ / PERI_ACLK_HZ - 1;
+	assert((aclk_div + 1) * PERI_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
+
+	hclk_div = ilog2(PERI_ACLK_HZ / PERI_HCLK_HZ);
+	assert((1 << hclk_div) * PERI_HCLK_HZ ==
+		PERI_ACLK_HZ && (hclk_div < 0x4));
+
+	pclk_div = ilog2(PERI_ACLK_HZ / PERI_PCLK_HZ);
+	assert((1 << pclk_div) * PERI_PCLK_HZ ==
+		PERI_ACLK_HZ && pclk_div < 0x8);
+
+	rk_clrsetreg(&cru->cru_clksel_con[10],
+		     PERI_PLL_SEL_MASK | PERI_PCLK_DIV_MASK |
+		     PERI_HCLK_DIV_MASK | PERI_ACLK_DIV_MASK,
+		     PERI_PLL_GPLL << PERI_PLL_SEL_SHIFT |
+		     pclk_div << PERI_PCLK_DIV_SHIFT |
+		     hclk_div << PERI_HCLK_DIV_SHIFT |
+		     aclk_div << PERI_ACLK_DIV_SHIFT);
+
+	/* PLL enter normal-mode */
+	rk_clrsetreg(&cru->cru_mode_con,
+		     GPLL_MODE_MASK | APLL_MODE_MASK | CPLL_MODE_MASK,
+		     GPLL_MODE_NORM << GPLL_MODE_SHIFT |
+		     APLL_MODE_NORM << APLL_MODE_SHIFT |
+		     CPLL_MODE_NORM << CPLL_MODE_SHIFT);
+
+	/*fix NAND controller  working clock max to 150Mhz */
+	rk_clrsetreg(&cru->cru_clksel_con[2],
+		     NANDC_PLL_SEL_MASK | NANDC_CLK_DIV_MASK,
+		     NANDC_PLL_SEL_GPLL << NANDC_PLL_SEL_SHIFT |
+		     3 << NANDC_CLK_DIV_SHIFT);
+}
+
+/* Get pll rate by id */
+static u32 rkclk_pll_get_rate(struct rk3128_cru *cru,
+			      enum rk_clk_id clk_id)
+{
+	u32 refdiv, fbdiv, postdiv1, postdiv2;
+	u32 con;
+	int pll_id = rk_pll_id(clk_id);
+	struct rk3128_pll *pll = &cru->pll[pll_id];
+	static u8 clk_shift[CLK_COUNT] = {
+		0xff, APLL_MODE_SHIFT, DPLL_MODE_SHIFT, CPLL_MODE_SHIFT,
+		GPLL_MODE_SHIFT, 0xff
+	};
+	static u32 clk_mask[CLK_COUNT] = {
+		0xff, APLL_MODE_MASK, DPLL_MODE_MASK, CPLL_MODE_MASK,
+		GPLL_MODE_MASK, 0xff
+	};
+	uint shift;
+	uint mask;
+
+	con = readl(&cru->cru_mode_con);
+	shift = clk_shift[clk_id];
+	mask = clk_mask[clk_id];
+
+	switch ((con & mask) >> shift) {
+	case GPLL_MODE_SLOW:
+		return OSC_HZ;
+	case GPLL_MODE_NORM:
+		/* normal mode */
+		con = readl(&pll->con0);
+		postdiv1 = (con & PLL_POSTDIV1_MASK) >> PLL_POSTDIV1_SHIFT;
+		fbdiv = (con & PLL_FBDIV_MASK) >> PLL_FBDIV_SHIFT;
+		con = readl(&pll->con1);
+		postdiv2 = (con & PLL_POSTDIV2_MASK) >> PLL_POSTDIV2_SHIFT;
+		refdiv = (con & PLL_REFDIV_MASK) >> PLL_REFDIV_SHIFT;
+		return (24 * fbdiv / (refdiv * postdiv1 * postdiv2)) * 1000000;
+	case GPLL_MODE_DEEP:
+	default:
+		return 32768;
+	}
+}
+
+static ulong rockchip_mmc_get_clk(struct rk3128_cru *cru, uint clk_general_rate,
+				  int periph)
+{
+	uint src_rate;
+	uint div, mux;
+	u32 con;
+
+	switch (periph) {
+	case HCLK_EMMC:
+	case SCLK_EMMC:
+	case SCLK_EMMC_SAMPLE:
+		con = readl(&cru->cru_clksel_con[12]);
+		mux = (con & EMMC_PLL_MASK) >> EMMC_PLL_SHIFT;
+		div = (con & EMMC_DIV_MASK) >> EMMC_DIV_SHIFT;
+		break;
+	case HCLK_SDMMC:
+	case SCLK_SDMMC:
+		con = readl(&cru->cru_clksel_con[11]);
+		mux = (con & MMC0_PLL_MASK) >> MMC0_PLL_SHIFT;
+		div = (con & MMC0_DIV_MASK) >> MMC0_DIV_SHIFT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	src_rate = mux == EMMC_SEL_24M ? OSC_HZ : clk_general_rate;
+	return DIV_TO_RATE(src_rate, div);
+}
+
+static ulong rockchip_mmc_set_clk(struct rk3128_cru *cru, uint clk_general_rate,
+				  int periph, uint freq)
+{
+	int src_clk_div;
+	int mux;
+
+	debug("%s: clk_general_rate=%u\n", __func__, clk_general_rate);
+
+	/* mmc clock defaulg div 2 internal, need provide double in cru */
+	src_clk_div = DIV_ROUND_UP(clk_general_rate / 2, freq);
+
+	if (src_clk_div > 128) {
+		src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, freq);
+		mux = EMMC_SEL_24M;
+	} else {
+		mux = EMMC_SEL_GPLL;
+	}
+
+	switch (periph) {
+	case HCLK_EMMC:
+		rk_clrsetreg(&cru->cru_clksel_con[12],
+			     EMMC_PLL_MASK | EMMC_DIV_MASK,
+			     mux << EMMC_PLL_SHIFT |
+			     (src_clk_div - 1) << EMMC_DIV_SHIFT);
+		break;
+	case HCLK_SDMMC:
+	case SCLK_SDMMC:
+		rk_clrsetreg(&cru->cru_clksel_con[11],
+			     MMC0_PLL_MASK | MMC0_DIV_MASK,
+			     mux << MMC0_PLL_SHIFT |
+			     (src_clk_div - 1) << MMC0_DIV_SHIFT);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return rockchip_mmc_get_clk(cru, clk_general_rate, periph);
+}
+
+static ulong rk3128_peri_get_pclk(struct rk3128_cru *cru, ulong clk_id)
+{
+	u32 div, con;
+
+	switch (clk_id) {
+	case PCLK_I2C0:
+	case PCLK_I2C1:
+	case PCLK_I2C2:
+	case PCLK_I2C3:
+	case PCLK_PWM:
+		con = readl(&cru->cru_clksel_con[10]);
+		div = con >> 12 & 0x3;
+		break;
+	default:
+		printf("do not support this peripheral bus\n");
+		return -EINVAL;
+	}
+
+	return DIV_TO_RATE(PERI_ACLK_HZ, div);
+}
+
+static ulong rk3128_peri_set_pclk(struct rk3128_cru *cru, ulong clk_id, uint hz)
+{
+	int src_clk_div;
+
+	src_clk_div = PERI_ACLK_HZ / hz;
+	assert(src_clk_div - 1 < 4);
+
+	switch (clk_id) {
+	case PCLK_I2C0:
+	case PCLK_I2C1:
+	case PCLK_I2C2:
+	case PCLK_I2C3:
+	case PCLK_PWM:
+		rk_setreg(&cru->cru_clksel_con[10],
+			  ((src_clk_div - 1) << 12));
+		break;
+	default:
+		printf("do not support this peripheral bus\n");
+		return -EINVAL;
+	}
+
+	return DIV_TO_RATE(PERI_ACLK_HZ, src_clk_div);
+}
+
+static ulong rk3128_saradc_get_clk(struct rk3128_cru *cru)
+{
+	u32 div, val;
+
+	val = readl(&cru->cru_clksel_con[24]);
+	div = bitfield_extract(val, SARADC_DIV_CON_SHIFT,
+			       SARADC_DIV_CON_WIDTH);
+
+	return DIV_TO_RATE(OSC_HZ, div);
+}
+
+static ulong rk3128_saradc_set_clk(struct rk3128_cru *cru, uint hz)
+{
+	int src_clk_div;
+
+	src_clk_div = DIV_ROUND_UP(OSC_HZ, hz) - 1;
+	assert(src_clk_div < 128);
+
+	rk_clrsetreg(&cru->cru_clksel_con[24],
+		     SARADC_DIV_CON_MASK,
+		     src_clk_div << SARADC_DIV_CON_SHIFT);
+
+	return rk3128_saradc_get_clk(cru);
+}
+
+static ulong rk3128_vop_set_clk(struct rk3128_cru *cru, ulong clk_id, uint hz)
+{
+	int src_clk_div;
+	struct pll_div cpll_config = {0};
+
+	src_clk_div = GPLL_HZ / hz;
+	assert(src_clk_div - 1 < 31);
+
+	switch (clk_id) {
+	case ACLK_VIO0:
+		rk_clrsetreg(&cru->cru_clksel_con[31],
+			     VIO0_PLL_MASK | VIO0_DIV_MASK,
+			     VIO0_SEL_GPLL << VIO0_PLL_SHIFT |
+			     (src_clk_div - 1) << VIO0_DIV_SHIFT);
+		break;
+	case ACLK_VIO1:
+		rk_clrsetreg(&cru->cru_clksel_con[31],
+			     VIO1_PLL_MASK | VIO1_DIV_MASK,
+			     VIO1_SEL_GPLL << VIO1_PLL_SHIFT |
+			     (src_clk_div - 1) << VIO1_DIV_SHIFT);
+		break;
+	case DCLK_LCDC:
+		if (pll_para_config(hz, &cpll_config))
+			return -1;
+		rkclk_set_pll(cru, CLK_CODEC, &cpll_config);
+
+		rk_clrsetreg(&cru->cru_clksel_con[27],
+			     DCLK_VOP_SEL_MASK | DCLK_VOP_DIV_CON_MASK,
+			     DCLK_VOP_PLL_SEL_CPLL << DCLK_VOP_SEL_SHIFT |
+			     (1 - 1) << DCLK_VOP_DIV_CON_SHIFT);
+		break;
+	default:
+		printf("do not support this vop freq\n");
+		return -EINVAL;
+	}
+
+	return hz;
+}
+
+static ulong rk3128_vop_get_rate(struct rk3128_cru *cru, ulong clk_id)
+{
+	u32 div, con, parent;
+
+	switch (clk_id) {
+	case ACLK_VIO0:
+		con = readl(&cru->cru_clksel_con[31]);
+		div = con  & 0x1f;
+		parent = GPLL_HZ;
+		break;
+	case ACLK_VIO1:
+		con = readl(&cru->cru_clksel_con[31]);
+		div = (con >> 8) & 0x1f;
+		parent = GPLL_HZ;
+		break;
+	case DCLK_LCDC:
+		con = readl(&cru->cru_clksel_con[27]);
+		div = (con >> 8) & 0xfff;
+		parent = rkclk_pll_get_rate(cru, CLK_CODEC);
+		break;
+	default:
+		return -ENOENT;
+	}
+	return DIV_TO_RATE(parent, div);
+}
+
+static ulong rk3128_clk_get_rate(struct clk *clk)
+{
+	struct rk3128_clk_priv *priv = dev_get_priv(clk->dev);
+
+	switch (clk->id) {
+	case 0 ... 63:
+		return rkclk_pll_get_rate(priv->cru, clk->id);
+	case PCLK_I2C0:
+	case PCLK_I2C1:
+	case PCLK_I2C2:
+	case PCLK_I2C3:
+	case PCLK_PWM:
+		return rk3128_peri_get_pclk(priv->cru, clk->id);
+	case SCLK_SARADC:
+		return rk3128_saradc_get_clk(priv->cru);
+	case DCLK_LCDC:
+	case ACLK_VIO0:
+	case ACLK_VIO1:
+		return rk3128_vop_get_rate(priv->cru, clk->id);
+	default:
+		return -ENOENT;
+	}
+}
+
+static ulong rk3128_clk_set_rate(struct clk *clk, ulong rate)
+{
+	struct rk3128_clk_priv *priv = dev_get_priv(clk->dev);
+	ulong new_rate, gclk_rate;
+
+	gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
+	switch (clk->id) {
+	case 0 ... 63:
+		return 0;
+	case DCLK_LCDC:
+	case ACLK_VIO0:
+	case ACLK_VIO1:
+		new_rate = rk3128_vop_set_clk(priv->cru,
+					      clk->id, rate);
+		break;
+	case HCLK_EMMC:
+		new_rate = rockchip_mmc_set_clk(priv->cru, gclk_rate,
+						clk->id, rate);
+		break;
+	case PCLK_I2C0:
+	case PCLK_I2C1:
+	case PCLK_I2C2:
+	case PCLK_I2C3:
+	case PCLK_PWM:
+		new_rate = rk3128_peri_set_pclk(priv->cru, clk->id, rate);
+		break;
+	case SCLK_SARADC:
+		new_rate = rk3128_saradc_set_clk(priv->cru, rate);
+		break;
+	default:
+		return -ENOENT;
+	}
+
+	return new_rate;
+}
+
+static struct clk_ops rk3128_clk_ops = {
+	.get_rate	= rk3128_clk_get_rate,
+	.set_rate	= rk3128_clk_set_rate,
+};
+
+static int rk3128_clk_probe(struct udevice *dev)
+{
+	struct rk3128_clk_priv *priv = dev_get_priv(dev);
+
+	priv->cru = (struct rk3128_cru *)dev_read_addr(dev);
+	rkclk_init(priv->cru);
+
+	return 0;
+}
+
+static int rk3128_clk_bind(struct udevice *dev)
+{
+	int ret;
+	struct udevice *sys_child;
+	struct sysreset_reg *priv;
+
+	/* The reset driver does not have a device node, so bind it here */
+	ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset",
+				 &sys_child);
+	if (ret) {
+		debug("Warning: No sysreset driver: ret=%d\n", ret);
+	} else {
+		priv = malloc(sizeof(struct sysreset_reg));
+		priv->glb_srst_fst_value = offsetof(struct rk3128_cru,
+						    cru_glb_srst_fst_value);
+		priv->glb_srst_snd_value = offsetof(struct rk3128_cru,
+						    cru_glb_srst_snd_value);
+		sys_child->priv = priv;
+	}
+
+	return 0;
+}
+
+static const struct udevice_id rk3128_clk_ids[] = {
+	{ .compatible = "rockchip,rk3128-cru" },
+	{ .compatible = "rockchip,rk3126-cru" },
+	{ }
+};
+
+U_BOOT_DRIVER(rockchip_rk3128_cru) = {
+	.name		= "clk_rk3128",
+	.id		= UCLASS_CLK,
+	.of_match	= rk3128_clk_ids,
+	.priv_auto_alloc_size = sizeof(struct rk3128_clk_priv),
+	.ops		= &rk3128_clk_ops,
+	.bind		= rk3128_clk_bind,
+	.probe		= rk3128_clk_probe,
+};
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index afca56dff1..7e8e4b0b27 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -168,6 +168,16 @@ config PINCTRL_ROCKCHIP_RK3036
 	  the GPIO definitions and pin control functions for each available
 	  multiplex function.
 
+config PINCTRL_ROCKCHIP_RK3128
+	bool "Rockchip rk3128 pin control driver"
+	depends on DM
+	help
+	  Support pin multiplexing control on Rockchip rk3128 SoCs.
+
+	  The driver is controlled by a device tree node which contains both
+	  the GPIO definitions and pin control functions for each available
+	  multiplex function.
+
 config PINCTRL_ROCKCHIP_RK3188
 	bool "Rockchip rk3188 pin control driver"
 	depends on DM
diff --git a/drivers/pinctrl/rockchip/Makefile b/drivers/pinctrl/rockchip/Makefile
index 5251771a10..f09c6e17b4 100644
--- a/drivers/pinctrl/rockchip/Makefile
+++ b/drivers/pinctrl/rockchip/Makefile
@@ -1,11 +1,11 @@
 #
-# Copyright (c) 2015 Google, Inc
-# Written by Simon Glass <sjg@chromium.org>
+# Copyright (c) 2017 Rockchip Electronics Co., Ltd
 #
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
 obj-$(CONFIG_PINCTRL_ROCKCHIP_RK3036) += pinctrl_rk3036.o
+obj-$(CONFIG_PINCTRL_ROCKCHIP_RK3128) += pinctrl_rk3128.o
 obj-$(CONFIG_PINCTRL_ROCKCHIP_RK3188) += pinctrl_rk3188.o
 obj-$(CONFIG_PINCTRL_ROCKCHIP_RK322X) += pinctrl_rk322x.o
 obj-$(CONFIG_PINCTRL_ROCKCHIP_RK3288) += pinctrl_rk3288.o
diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3128.c b/drivers/pinctrl/rockchip/pinctrl_rk3128.c
new file mode 100644
index 0000000000..b1c32ac592
--- /dev/null
+++ b/drivers/pinctrl/rockchip/pinctrl_rk3128.c
@@ -0,0 +1,187 @@
+/*
+ * Pinctrl driver for Rockchip 3128 SoCs
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/grf_rk3128.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/periph.h>
+#include <dm/pinctrl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct rk3128_pinctrl_priv {
+	struct rk3128_grf *grf;
+};
+
+static void pinctrl_rk3128_i2c_config(struct rk3128_grf *grf, int i2c_id)
+{
+	switch (i2c_id) {
+	case PERIPH_ID_I2C0:
+		rk_clrsetreg(&grf->gpio0a_iomux,
+			     GPIO0A1_MASK | GPIO0A0_MASK,
+			     GPIO0A1_I2C0_SDA << GPIO0A1_SHIFT |
+			     GPIO0A0_I2C0_SCL << GPIO0A0_SHIFT);
+
+		break;
+	case PERIPH_ID_I2C1:
+		rk_clrsetreg(&grf->gpio0a_iomux,
+			     GPIO0A3_MASK | GPIO0A2_MASK,
+			     GPIO0A3_I2C1_SDA << GPIO0A3_SHIFT |
+			     GPIO0A2_I2C1_SCL << GPIO0A2_SHIFT);
+		break;
+	case PERIPH_ID_I2C2:
+		rk_clrsetreg(&grf->gpio2c_iomux2,
+			     GPIO2C5_MASK | GPIO2C4_MASK,
+			     GPIO2C5_I2C2_SCL << GPIO2C5_SHIFT |
+			     GPIO2C4_I2C2_SDA << GPIO2C4_SHIFT);
+		break;
+	case PERIPH_ID_I2C3:
+		rk_clrsetreg(&grf->gpio0a_iomux,
+			     GPIO0A7_MASK | GPIO0A6_MASK,
+			     GPIO0A7_I2C3_SDA << GPIO0A7_SHIFT |
+			     GPIO0A6_I2C3_SCL << GPIO0A6_SHIFT);
+
+		break;
+	}
+}
+
+static void pinctrl_rk3128_sdmmc_config(struct rk3128_grf *grf, int mmc_id)
+{
+	switch (mmc_id) {
+	case PERIPH_ID_EMMC:
+		rk_clrsetreg(&grf->gpio1d_iomux, 0xffff,
+			     GPIO1D7_EMMC_D7 << GPIO1D7_SHIFT |
+			     GPIO1D6_EMMC_D6 << GPIO1D6_SHIFT |
+			     GPIO1D5_EMMC_D5 << GPIO1D5_SHIFT |
+			     GPIO1D4_EMMC_D4 << GPIO1D4_SHIFT |
+			     GPIO1D3_EMMC_D3 << GPIO1D3_SHIFT |
+			     GPIO1D2_EMMC_D2 << GPIO1D2_SHIFT |
+			     GPIO1D1_EMMC_D1 << GPIO1D1_SHIFT |
+			     GPIO1D0_EMMC_D0 << GPIO1D0_SHIFT);
+		rk_clrsetreg(&grf->gpio2a_iomux,
+			     GPIO2A5_MASK | GPIO2A7_MASK,
+			     GPIO2A5_EMMC_PWREN << GPIO2A5_SHIFT |
+			     GPIO2A7_EMMC_CLKOUT << GPIO2A7_SHIFT);
+		break;
+	case PERIPH_ID_SDCARD:
+		rk_clrsetreg(&grf->gpio1c_iomux, 0x0fff,
+			     GPIO1C5_MMC0_D3 << GPIO1C5_SHIFT |
+			     GPIO1C4_MMC0_D2 << GPIO1C4_SHIFT |
+			     GPIO1C3_MMC0_D1 << GPIO1C3_SHIFT |
+			     GPIO1C2_MMC0_D0 << GPIO1C2_SHIFT |
+			     GPIO1C1_MMC0_DETN << GPIO1C1_SHIFT |
+			     GPIO1C0_MMC0_CLKOUT << GPIO1C0_SHIFT);
+		break;
+	}
+}
+
+static int rk3128_pinctrl_request(struct udevice *dev, int func, int flags)
+{
+	struct rk3128_pinctrl_priv *priv = dev_get_priv(dev);
+
+	debug("%s: func=%x, flags=%x\n", __func__, func, flags);
+	switch (func) {
+	case PERIPH_ID_I2C0:
+	case PERIPH_ID_I2C1:
+	case PERIPH_ID_I2C2:
+	case PERIPH_ID_I2C3:
+		pinctrl_rk3128_i2c_config(priv->grf, func);
+		break;
+	case PERIPH_ID_SDMMC0:
+	case PERIPH_ID_SDMMC1:
+		pinctrl_rk3128_sdmmc_config(priv->grf, func);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rk3128_pinctrl_get_periph_id(struct udevice *dev,
+					struct udevice *periph)
+{
+	u32 cell[3];
+	int ret;
+
+	ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(periph),
+				   "interrupts", cell, ARRAY_SIZE(cell));
+	if (ret < 0)
+		return -EINVAL;
+
+	switch (cell[1]) {
+	case 14:
+		return PERIPH_ID_SDCARD;
+	case 16:
+		return PERIPH_ID_EMMC;
+	case 20:
+		return PERIPH_ID_UART0;
+	case 21:
+		return PERIPH_ID_UART1;
+	case 22:
+		return PERIPH_ID_UART2;
+	case 23:
+		return PERIPH_ID_SPI0;
+	case 24:
+		return PERIPH_ID_I2C0;
+	case 25:
+		return PERIPH_ID_I2C1;
+	case 26:
+		return PERIPH_ID_I2C2;
+	case 27:
+		return PERIPH_ID_I2C3;
+	case 30:
+		return PERIPH_ID_PWM0;
+	}
+	return -ENOENT;
+}
+
+static int rk3128_pinctrl_set_state_simple(struct udevice *dev,
+					   struct udevice *periph)
+{
+	int func;
+
+	func = rk3128_pinctrl_get_periph_id(dev, periph);
+	if (func < 0)
+		return func;
+	return rk3128_pinctrl_request(dev, func, 0);
+}
+
+static struct pinctrl_ops rk3128_pinctrl_ops = {
+	.set_state_simple	= rk3128_pinctrl_set_state_simple,
+	.request	= rk3128_pinctrl_request,
+	.get_periph_id	= rk3128_pinctrl_get_periph_id,
+};
+
+static int rk3128_pinctrl_probe(struct udevice *dev)
+{
+	struct rk3128_pinctrl_priv *priv = dev_get_priv(dev);
+
+	priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+	debug("%s: grf=%p\n", __func__, priv->grf);
+	return 0;
+}
+
+static const struct udevice_id rk3128_pinctrl_ids[] = {
+	{ .compatible = "rockchip,rk3128-pinctrl" },
+	{ }
+};
+
+U_BOOT_DRIVER(pinctrl_rk3128) = {
+	.name		= "pinctrl_rk3128",
+	.id		= UCLASS_PINCTRL,
+	.of_match	= rk3128_pinctrl_ids,
+	.priv_auto_alloc_size = sizeof(struct rk3128_pinctrl_priv),
+	.ops		= &rk3128_pinctrl_ops,
+	.bind		= dm_scan_fdt_dev,
+	.probe		= rk3128_pinctrl_probe,
+};
diff --git a/drivers/ram/rockchip/Makefile b/drivers/ram/rockchip/Makefile
index 45b5fe7247..1a1e5578ca 100644
--- a/drivers/ram/rockchip/Makefile
+++ b/drivers/ram/rockchip/Makefile
@@ -5,6 +5,7 @@
 #
 
 obj-$(CONFIG_ROCKCHIP_RK3368) = dmc-rk3368.o
+obj-$(CONFIG_ROCKCHIP_RK3128) = sdram_rk3128.o
 obj-$(CONFIG_ROCKCHIP_RK3188) = sdram_rk3188.o
 obj-$(CONFIG_ROCKCHIP_RK322X) = sdram_rk322x.o
 obj-$(CONFIG_ROCKCHIP_RK3288) = sdram_rk3288.o
diff --git a/drivers/ram/rockchip/sdram_rk3128.c b/drivers/ram/rockchip/sdram_rk3128.c
new file mode 100644
index 0000000000..a33127f4b0
--- /dev/null
+++ b/drivers/ram/rockchip/sdram_rk3128.c
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+ *
+ * SPDX-License-Identifier:     GPL-2.0
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <ram.h>
+#include <syscon.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/grf_rk3128.h>
+#include <asm/arch/sdram_common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+struct dram_info {
+	struct ram_info info;
+	struct rk3128_grf *grf;
+};
+
+static int rk3128_dmc_probe(struct udevice *dev)
+{
+	struct dram_info *priv = dev_get_priv(dev);
+
+	priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+	debug("%s: grf=%p\n", __func__, priv->grf);
+	priv->info.base = CONFIG_SYS_SDRAM_BASE;
+	priv->info.size = rockchip_sdram_size(
+				(phys_addr_t)&priv->grf->os_reg[1]);
+
+	return 0;
+}
+
+static int rk3128_dmc_get_info(struct udevice *dev, struct ram_info *info)
+{
+	struct dram_info *priv = dev_get_priv(dev);
+
+	*info = priv->info;
+
+	return 0;
+}
+
+static struct ram_ops rk3128_dmc_ops = {
+	.get_info = rk3128_dmc_get_info,
+};
+
+static const struct udevice_id rk3128_dmc_ids[] = {
+	{ .compatible = "rockchip,rk3128-dmc" },
+	{ }
+};
+
+U_BOOT_DRIVER(dmc_rk3128) = {
+	.name = "rockchip_rk3128_dmc",
+	.id = UCLASS_RAM,
+	.of_match = rk3128_dmc_ids,
+	.ops = &rk3128_dmc_ops,
+	.probe = rk3128_dmc_probe,
+	.priv_auto_alloc_size = sizeof(struct dram_info),
+};
diff --git a/include/configs/evb_rk3128.h b/include/configs/evb_rk3128.h
new file mode 100644
index 0000000000..a34153aac5
--- /dev/null
+++ b/include/configs/evb_rk3128.h
@@ -0,0 +1,15 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __EVB_RK3128_H
+#define __EVB_RK3128_H
+
+#include <configs/rk3128_common.h>
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#endif
diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h
new file mode 100644
index 0000000000..e915a562b9
--- /dev/null
+++ b/include/configs/rk3128_common.h
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __CONFIG_RK3128_COMMON_H
+#define __CONFIG_RK3128_COMMON_H
+
+#include "rockchip-common.h"
+
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_MALLOC_LEN		(32 << 20)
+#define CONFIG_SYS_CBSIZE		1024
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#define CONFIG_SYS_TIMER_RATE		(24 * 1000 * 1000)
+#define CONFIG_SYS_TIMER_BASE		0x200440a0 /* TIMER5 */
+#define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMER_BASE + 8)
+
+#define CONFIG_SYS_NS16550_MEM32
+
+#define CONFIG_SYS_TEXT_BASE		0x60000000
+#define CONFIG_SYS_INIT_SP_ADDR		0x60100000
+#define CONFIG_SYS_LOAD_ADDR		0x60800800
+
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* 64M */
+
+/* MMC/SD IP block */
+#define CONFIG_BOUNCE_BUFFER
+
+#define CONFIG_SUPPORT_VFAT
+#define CONFIG_FS_EXT4
+
+/* RAW SD card / eMMC locations. */
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	(128 << 10)
+
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
+#define CONFIG_SYS_SDRAM_BASE		0x60000000
+#define CONFIG_NR_DRAM_BANKS		2
+#define SDRAM_MAX_SIZE			0x80000000
+
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI
+#define CONFIG_SF_DEFAULT_SPEED 20000000
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     1
+
+#ifndef CONFIG_SPL_BUILD
+
+/* usb mass storage */
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+
+#define ENV_MEM_LAYOUT_SETTINGS \
+	"scriptaddr=0x60500000\0" \
+	"pxefile_addr_r=0x60600000\0" \
+	"fdt_addr_r=0x61f00000\0" \
+	"kernel_addr_r=0x62000000\0" \
+	"ramdisk_addr_r=0x64000000\0"
+
+#include <config_distro_bootcmd.h>
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	ENV_MEM_LAYOUT_SETTINGS \
+	"partitions=" PARTS_DEFAULT \
+	BOOTENV
+
+#endif
+
+#endif
diff --git a/include/dt-bindings/clock/rk3128-cru.h b/include/dt-bindings/clock/rk3128-cru.h
new file mode 100644
index 0000000000..476268a78b
--- /dev/null
+++ b/include/dt-bindings/clock/rk3128-cru.h
@@ -0,0 +1,190 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3128_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3128_H
+
+/* core clocks */
+#define PLL_APLL		1
+#define PLL_DPLL		2
+#define PLL_GPLL		3
+#define ARMCLK			4
+
+/* sclk gates (special clocks) */
+#define SCLK_GPU		64
+#define SCLK_SPI		65
+#define SCLK_SDMMC		68
+#define SCLK_SDIO		69
+#define SCLK_EMMC		71
+#define SCLK_NANDC		76
+#define SCLK_UART0		77
+#define SCLK_UART1		78
+#define SCLK_UART2		79
+#define SCLK_I2S		82
+#define SCLK_SPDIF		83
+#define SCLK_TIMER0		85
+#define SCLK_TIMER1		86
+#define SCLK_TIMER2		87
+#define SCLK_TIMER3		88
+#define SCLK_SARADC		91
+#define SCLK_OTGPHY0		93
+#define SCLK_LCDC		100
+#define SCLK_HDMI		109
+#define SCLK_HEVC		111
+#define SCLK_I2S_OUT		113
+#define SCLK_SDMMC_DRV		114
+#define SCLK_SDIO_DRV		115
+#define SCLK_EMMC_DRV		117
+#define SCLK_SDMMC_SAMPLE	118
+#define SCLK_SDIO_SAMPLE	119
+#define SCLK_EMMC_SAMPLE	121
+#define SCLK_PVTM_CORE          123
+#define SCLK_PVTM_GPU           124
+#define SCLK_PVTM_VIDEO         125
+#define SCLK_MAC		151
+#define SCLK_MACREF		152
+#define SCLK_SFC		160
+
+#define DCLK_LCDC		190
+
+/* aclk gates */
+#define ACLK_DMAC2		194
+#define ACLK_VIO0		197
+#define ACLK_VIO1		203
+#define ACLK_VCODEC		208
+#define ACLK_CPU		209
+#define ACLK_PERI		210
+
+/* pclk gates */
+#define PCLK_SARADC		318
+#define PCLK_GPIO0		320
+#define PCLK_GPIO1		321
+#define PCLK_GPIO2		322
+#define PCLK_GPIO3		323
+#define PCLK_GRF		329
+#define PCLK_I2C0		332
+#define PCLK_I2C1		333
+#define PCLK_I2C2		334
+#define PCLK_I2C3		335
+#define PCLK_SPI		338
+#define PCLK_UART0		341
+#define PCLK_UART1		342
+#define PCLK_UART2		343
+#define PCLK_PWM		350
+#define PCLK_TIMER		353
+#define PCLK_HDMI		360
+#define PCLK_CPU		362
+#define PCLK_PERI		363
+#define PCLK_DDRUPCTL		364
+#define PCLK_WDT		368
+
+/* hclk gates */
+#define HCLK_OTG0		449
+#define HCLK_OTG1		450
+#define HCLK_NANDC		453
+#define HCLK_SDMMC		456
+#define HCLK_SDIO		457
+#define HCLK_EMMC		459
+#define HCLK_I2S		462
+#define HCLK_LCDC		465
+#define HCLK_ROM		467
+#define HCLK_VIO_BUS		472
+#define HCLK_VCODEC		476
+#define HCLK_CPU		477
+#define HCLK_PERI		478
+
+#define CLK_NR_CLKS		(HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0		0
+#define SRST_CORE1		1
+#define SRST_CORE0_DBG		4
+#define SRST_CORE1_DBG		5
+#define SRST_CORE0_POR		8
+#define SRST_CORE1_POR		9
+#define SRST_L2C		12
+#define SRST_TOPDBG		13
+#define SRST_STRC_SYS_A		14
+#define SRST_PD_CORE_NIU	15
+
+#define SRST_TIMER2		16
+#define SRST_CPUSYS_H		17
+#define SRST_AHB2APB_H		19
+#define SRST_TIMER3		20
+#define SRST_INTMEM		21
+#define SRST_ROM		22
+#define SRST_PERI_NIU		23
+#define SRST_I2S		24
+#define SRST_DDR_PLL		25
+#define SRST_GPU_DLL		26
+#define SRST_TIMER0		27
+#define SRST_TIMER1		28
+#define SRST_CORE_DLL		29
+#define SRST_EFUSE_P		30
+#define SRST_ACODEC_P		31
+
+#define SRST_GPIO0		32
+#define SRST_GPIO1		33
+#define SRST_GPIO2		34
+#define SRST_UART0		39
+#define SRST_UART1		40
+#define SRST_UART2		41
+#define SRST_I2C0		43
+#define SRST_I2C1		44
+#define SRST_I2C2		45
+#define SRST_SFC		47
+
+#define SRST_PWM0		48
+#define SRST_DAP		51
+#define SRST_DAP_SYS		52
+#define SRST_GRF		55
+#define SRST_PERIPHSYS_A	57
+#define SRST_PERIPHSYS_H	58
+#define SRST_PERIPHSYS_P	59
+#define SRST_CPU_PERI		61
+#define SRST_EMEM_PERI		62
+#define SRST_USB_PERI		63
+
+#define SRST_DMA2		64
+#define SRST_MAC		66
+#define SRST_NANDC		68
+#define SRST_USBOTG0		69
+#define SRST_OTGC0		71
+#define SRST_USBOTG1		72
+#define SRST_OTGC1		74
+#define SRST_DDRMSCH		79
+
+#define SRST_MMC0		81
+#define SRST_SDIO		82
+#define SRST_EMMC		83
+#define SRST_SPI0		84
+#define SRST_WDT		86
+#define SRST_SARADC		87
+#define SRST_DDRPHY		88
+#define SRST_DDRPHY_P		89
+#define SRST_DDRCTRL		90
+#define SRST_DDRCTRL_P		91
+
+#define SRST_HDMI_P		96
+#define SRST_VIO_BUS_H		99
+#define SRST_UTMI0		103
+#define SRST_UTMI1		104
+#define SRST_USBPOR		105
+
+#define SRST_VCODEC_A		112
+#define SRST_VCODEC_H		113
+#define SRST_VIO1_A		114
+#define SRST_HEVC		115
+#define SRST_VCODEC_NIU_A	116
+#define SRST_LCDC1_A		117
+#define SRST_LCDC1_H		118
+#define SRST_LCDC1_D		119
+#define SRST_GPU		120
+#define SRST_GPU_NIU_A		122
+
+#define SRST_DBG_P		131
+
+#endif