mpc85xx boards: initdram() cleanup/bugfix

Correct initdram to use phys_size_t to represent the size of
dram; instead of changing this all over the place, and correcting
all the other random errors I've noticed, create a
common initdram that is used by all non-corenet 85xx parts.  Most
of the initdram() functions were identical, with 2 common differences:

1) DDR tlbs for the fixed_sdram case were set up in initdram() on
some boards, and were part of the tlb_table on others.  I have
changed them all over to the initdram() method - we shouldn't
be accessing dram before this point so they don't need to be
done sooner, and this seems cleaner.

2) Parts that require the DDR11 erratum workaround had different
implementations - I have adopted the version from the Freescale
errata document.  It also looks like some of the versions were
buggy, and, depending on timing, could have resulted in the
DDR controller being disabled.  This seems bad.

The xpedite boards had a common/fsl_8xxx_ddr.c; with this
change only the 517 board uses this so I have moved the ddr code
into that board's directory in xpedite517x.c

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

31 files changed, 121 insertions, 820 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 55ee36d0bc..bea8e10af7 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -34,6 +34,7 @@
 #include <asm/io.h>
 #include <asm/mmu.h>
 #include <asm/fsl_law.h>
+#include <asm/fsl_lbc.h>
 #include <post.h>
 #include <asm/processor.h>
 #include <asm/fsl_ddr_sdram.h>
@@ -286,6 +287,57 @@ void mpc85xx_reginfo(void)
 	print_lbc_regs();
 }
 
+/* Common ddr init for non-corenet fsl 85xx platforms */
+#ifndef CONFIG_FSL_CORENET
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size = 0;
+
+#if defined(CONFIG_DDR_DLL)
+	{
+		ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+		unsigned int x = 10;
+		unsigned int i;
+
+		/*
+		 * Work around to stabilize DDR DLL
+		 */
+		out_be32(&gur->ddrdllcr, 0x81000000);
+		asm("sync;isync;msync");
+		udelay(200);
+		while (in_be32(&gur->ddrdllcr) != 0x81000100) {
+			setbits_be32(&gur->devdisr, 0x00010000);
+			for (i = 0; i < x; i++)
+				;
+			clrbits_be32(&gur->devdisr, 0x00010000);
+			x++;
+		}
+	}
+#endif
+
+#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD)
+	dram_size = fsl_ddr_sdram();
+#else
+	dram_size = fixed_sdram();
+#endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/*
+	 * Initialize and enable DDR ECC.
+	 */
+	ddr_enable_ecc(dram_size);
+#endif
+
+	/* Some boards also have sdram on the lbc */
+	sdram_init();
+
+	puts("DDR: ");
+	return dram_size;
+}
+#endif
+
 #if CONFIG_POST & CONFIG_SYS_POST_MEMORY
 
 /* Board-specific functions defined in each board's ddr.c */
diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
index fcef40c5b8..10fcd243f7 100644
--- a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
+++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
@@ -9,6 +9,16 @@
 #include <common.h>
 #include <asm/fsl_lbc.h>
 
+#ifdef CONFIG_MPC85xx
+/* Boards should provide their own version of this if they use lbc sdram */
+void __sdram_init(void)
+{
+	/* Do nothing */
+}
+void sdram_init(void) __attribute__((weak, alias("__sdram_init")));
+#endif
+
+
 void print_lbc_regs(void)
 {
 	int i;
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index 17d4b319bc..8ceae18457 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -214,6 +214,19 @@ typedef struct memctl_options_s {
 
 extern phys_size_t fsl_ddr_sdram(void);
 
+/*
+ * The 85xx boards have a common prototype for fixed_sdram so put the
+ * declaration here.
+ */
+#ifdef CONFIG_MPC85xx
+extern phys_size_t fixed_sdram(void);
+#endif
+
+#if defined(CONFIG_DDR_ECC)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+
 typedef struct fixed_ddr_parm{
 	int min_freq;
 	int max_freq;
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 82d24ab13f..fcf3371f59 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -16,6 +16,10 @@
 #include <config.h>
 #include <common.h>
 
+#ifdef CONFIG_MPC85xx
+void sdram_init(void);
+#endif
+
 /* BR - Base Registers
  */
 #define BR0				0x5000		/* Register offset to immr */
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index bd80cb7765..58dc564eea 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -42,8 +42,6 @@
 
 #include "../common/sgmii_riser.h"
 
-phys_size_t fixed_sdram(void);
-
 int board_early_init_f (void)
 {
 #ifdef CONFIG_MMC
@@ -98,25 +96,6 @@ int checkboard (void)
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	phys_size_t dram_size = 0;
-
-	puts("Initializing....");
-
-#ifdef CONFIG_SPD_EEPROM
-	dram_size = fsl_ddr_sdram();
-#else
-	dram_size = fixed_sdram();
-#endif
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 #if !defined(CONFIG_SPD_EEPROM)
 /*
  * Fixed sdram init -- doesn't use serial presence detect.
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index d354a26f69..deab811bdd 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -39,8 +39,6 @@ extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
 
 void local_bus_init(void);
-void sdram_init(void);
-long int fixed_sdram(void);
 
 int checkboard (void)
 {
@@ -61,54 +59,6 @@ int checkboard (void)
 	return 0;
 }
 
-
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-	    volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	    uint temp_ddrdll = 0;
-
-	    /*
-	     * Work around to stabilize DDR DLL
-	     */
-	    temp_ddrdll = gur->ddrdllcr;
-	    gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-	    asm("sync;isync;msync");
-	}
-#endif
-
-#ifdef CONFIG_SPD_EEPROM
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
-	dram_size *= 0x100000;
-#else
-	dram_size = fixed_sdram();
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
-	/*
-	 * Initialize SDRAM.
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-
 /*
  * Initialize Local Bus
  */
@@ -232,7 +182,7 @@ sdram_init(void)
 /*************************************************************************
  *  fixed sdram init -- doesn't use serial presence detect.
  ************************************************************************/
-long int fixed_sdram (void)
+phys_size_t fixed_sdram(void)
 {
   #ifndef CONFIG_SYS_RAMBOOT
 	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
diff --git a/board/freescale/mpc8540ads/tlb.c b/board/freescale/mpc8540ads/tlb.c
index a9925d5427..adcc0ade0a 100644
--- a/board/freescale/mpc8540ads/tlb.c
+++ b/board/freescale/mpc8540ads/tlb.c
@@ -106,25 +106,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_16K, 1),
-
-#if !defined(CONFIG_SPD_EEPROM)
-	/*
-	 * TLB 8, 9:	128M	DDR
-	 * 0x00000000	64M	DDR System memory
-	 * 0x04000000	64M	DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 * Make sure the TLB count at the top of this table is correct.
-	 * Likely it needs to be increased by two for these entries.
-	 */
-#error("Update the number of table entries in tlb1_entry")
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 8, BOOKE_PAGESZ_64M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 9, BOOKE_PAGESZ_64M, 1),
-#endif
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 59ec60446e..59df2bdb39 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -42,7 +42,6 @@ extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
 
 void local_bus_init(void);
-void sdram_init(void);
 
 /*
  * I/O Port configuration table
@@ -242,48 +241,6 @@ int checkboard (void)
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 /*
  * Initialize Local Bus
  */
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 2b6900c081..caea2f4d9f 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -68,23 +68,6 @@ int checkboard (void)
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
-	dram_size *= 0x100000;
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 #ifdef CONFIG_PCI1
 static struct pci_controller pci1_hose;
 #endif
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index ebeb897490..a4a35fa3bf 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -42,7 +42,6 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 void local_bus_init(void);
-void sdram_init(void);
 
 int checkboard (void)
 {
@@ -75,43 +74,6 @@ int checkboard (void)
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 /*
  * Initialize Local Bus
  */
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index edaba26f53..5fe7f13981 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -40,7 +40,6 @@ extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
 
 void local_bus_init(void);
-void sdram_init(void);
 
 /*
  * I/O Port configuration table
@@ -240,50 +239,6 @@ int checkboard (void)
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 /*
  * Initialize Local Bus
  */
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 2ae0459fec..49701efda8 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -44,8 +44,6 @@ extern void ddr_enable_ecc(unsigned int dram_size);
 
 
 void local_bus_init(void);
-void sdram_init(void);
-long int fixed_sdram(void);
 
 
 /*
@@ -266,54 +264,6 @@ int checkboard (void)
 	return 0;
 }
 
-
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-	    volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	    uint temp_ddrdll = 0;
-
-	    /*
-	     * Work around to stabilize DDR DLL
-	     */
-	    temp_ddrdll = gur->ddrdllcr;
-	    gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-	    asm("sync;isync;msync");
-	}
-#endif
-
-#ifdef CONFIG_SPD_EEPROM
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
-	dram_size *= 0x100000;
-#else
-	dram_size = fixed_sdram();
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
-	/*
-	 * Initialize SDRAM.
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-
 /*
  * Initialize Local Bus
  */
@@ -437,7 +387,7 @@ sdram_init(void)
 /*************************************************************************
  *  fixed sdram init -- doesn't use serial presence detect.
  ************************************************************************/
-long int fixed_sdram (void)
+phys_size_t fixed_sdram(void)
 {
   #ifndef CONFIG_SYS_RAMBOOT
 	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
diff --git a/board/freescale/mpc8560ads/tlb.c b/board/freescale/mpc8560ads/tlb.c
index a9925d5427..adcc0ade0a 100644
--- a/board/freescale/mpc8560ads/tlb.c
+++ b/board/freescale/mpc8560ads/tlb.c
@@ -106,25 +106,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_16K, 1),
-
-#if !defined(CONFIG_SPD_EEPROM)
-	/*
-	 * TLB 8, 9:	128M	DDR
-	 * 0x00000000	64M	DDR System memory
-	 * 0x04000000	64M	DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 * Make sure the TLB count at the top of this table is correct.
-	 * Likely it needs to be increased by two for these entries.
-	 */
-#error("Update the number of table entries in tlb1_entry")
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 8, BOOKE_PAGESZ_64M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 9, BOOKE_PAGESZ_64M, 1),
-#endif
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index 71cfbf0f37..85885fc4fe 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -101,7 +101,6 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 };
 
 void local_bus_init(void);
-void sdram_init(void);
 
 int board_early_init_f (void)
 {
@@ -138,43 +137,6 @@ int checkboard (void)
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 /*
  * Initialize Local Bus
  */
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index 9700b8c6e8..07db16aa0c 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -45,8 +45,6 @@
 #include "../common/pq-mds-pib.h"
 #endif
 
-phys_size_t fixed_sdram(void);
-
 const qe_iop_conf_t qe_iop_conf_tab[] = {
 	/* QE_MUX_MDC */
 	{2,  31, 1, 0, 1}, /* QE_MUX_MDC               */
@@ -245,40 +243,6 @@ int checkboard (void)
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	/*
-	 * Work around to stabilize DDR DLL MSYNC_IN.
-	 * Errata DDR9 seems to have been fixed.
-	 * This is now the workaround for Errata DDR11:
-	 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-	 */
-	volatile ccsr_gur_t *gur =
-			(void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-	out_be32(&gur->ddrdllcr, 0x81000000);
-	udelay(200);
-#endif
-
-#ifdef CONFIG_SPD_EEPROM
-	dram_size = fsl_ddr_sdram();
-#else
-	dram_size = fixed_sdram();
-#endif
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 #if !defined(CONFIG_SPD_EEPROM)
 phys_size_t fixed_sdram(void)
 {
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index c217c278ea..c69dfe4cc4 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -39,8 +39,6 @@
 
 #include "../common/sgmii_riser.h"
 
-long int fixed_sdram(void);
-
 int checkboard (void)
 {
 	u8 vboot;
@@ -74,23 +72,6 @@ int checkboard (void)
 	return 0;
 }
 
-phys_size_t initdram(int board_type)
-{
-	phys_size_t dram_size = 0;
-
-	puts("Initializing....");
-
-#ifdef CONFIG_SPD_EEPROM
-	dram_size = fsl_ddr_sdram();
-#else
-	dram_size = fixed_sdram();
-#endif
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	puts("    DDR: ");
-	return dram_size;
-}
 
 #if !defined(CONFIG_SPD_EEPROM)
 /*
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index 7cb549b1bf..e3e830066b 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -76,19 +76,6 @@ int checkboard(void)
 	return 0;
 }
 
-phys_size_t initdram(int board_type)
-{
-	phys_size_t dram_size = 0;
-
-	puts("Initializing....\n");
-
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000) * 0x100000;
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 #define CONFIG_TFP410_I2C_ADDR	0x38
 
 /* Masks for the SSI_TDM and AUDCLK bits of the ngPIXIS BRDCFG1 register. */
diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c
index 15b46b0da1..e54fde2530 100644
--- a/board/freescale/p1_p2_rdb/ddr.c
+++ b/board/freescale/p1_p2_rdb/ddr.c
@@ -239,19 +239,6 @@ phys_size_t fixed_sdram (void)
 
 	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
 
+	set_ddr_laws(0, ddr_size, LAW_TRGT_IF_DDR_1);
 	return ddr_size;
 }
-
-phys_size_t initdram(int board_type)
-{
-	phys_size_t dram_size = 0;
-
-	dram_size = fixed_sdram();
-	set_ddr_laws(0, dram_size, LAW_TRGT_IF_DDR_1);
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	puts("DDR: ");
-	return dram_size;
-}
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index 07b08014df..40589da117 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -44,8 +44,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-phys_size_t fixed_sdram(void);
-
 int checkboard(void)
 {
 	u8 sw;
@@ -70,31 +68,6 @@ int checkboard(void)
 	return 0;
 }
 
-phys_size_t initdram(int board_type)
-{
-	phys_size_t dram_size = 0;
-
-	puts("Initializing....");
-
-#ifdef CONFIG_DDR_SPD
-	dram_size = fsl_ddr_sdram();
-#else
-	dram_size = fixed_sdram();
-
-	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
-			 dram_size,
-			 LAW_TRGT_IF_DDR) < 0) {
-		printf("ERROR setting Local Access Windows for DDR\n");
-		return 0;
-	};
-#endif
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 #if !defined(CONFIG_DDR_SPD)
 /*
  * Fixed sdram init -- doesn't use serial presence detect.
@@ -170,6 +143,13 @@ phys_size_t fixed_sdram(void)
 	udelay(500);
 #endif
 
+	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
+			 CONFIG_SYS_SDRAM_SIZE * 1024 * 1024,
+			 LAW_TRGT_IF_DDR) < 0) {
+		printf("ERROR setting Local Access Windows for DDR\n");
+		return 0;
+	};
+
 	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index 06c1eea377..1bce6fa3f3 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -43,8 +43,6 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 void local_bus_init(void);
-void sdram_init(void);
-long int fixed_sdram (void);
 
 int board_early_init_f (void)
 {
@@ -69,47 +67,6 @@ int checkboard (void)
 	return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-		out_be32(&gur->ddrdllcr, 0x81000000);
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-#else
-	dram_size = fixed_sdram ();
-#endif
-
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
 /*
  * Initialize Local Bus
  */
@@ -268,7 +225,7 @@ testdram(void)
  *  fixed_sdram init -- doesn't use serial presence detect.
  *  assumes 256MB DDR2 SDRAM SODIMM, without ECC, running at DDR400 speed.
  ************************************************************************/
-long int fixed_sdram (void)
+phys_size_t fixed_sdram(void)
 {
 	volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
 
diff --git a/board/sbc8548/tlb.c b/board/sbc8548/tlb.c
index 38bdeb37c3..bb4c05210c 100644
--- a/board/sbc8548/tlb.c
+++ b/board/sbc8548/tlb.c
@@ -65,44 +65,34 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      0, 1, BOOKE_PAGESZ_1G, 1),
 
 	/*
-	 * TLB 2:	256M Cacheable, non-guarded
-	 * 0x0		256M DDR SDRAM
-	 */
-#if !defined(CONFIG_SPD_EEPROM)
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 2, BOOKE_PAGESZ_256M, 1),
-#endif
-
-	/*
-	 * TLB 3:	64M	Non-cacheable, guarded
+	 * TLB 2:	64M	Non-cacheable, guarded
 	 * 0xe0000000	1M	CCSRBAR
 	 * 0xe2000000	8M	PCI1 IO
 	 * 0xe2800000	8M	PCIe IO
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_64M, 1),
+		      0, 2, BOOKE_PAGESZ_64M, 1),
 
 	/*
-	 * TLB 4:	64M	Cacheable, non-guarded
+	 * TLB 3:	64M	Cacheable, non-guarded
 	 * 0xf0000000	64M	LBC SDRAM First half
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 4, BOOKE_PAGESZ_64M, 1),
+		      0, 3, BOOKE_PAGESZ_64M, 1),
 
 	/*
-	 * TLB 5:	64M	Cacheable, non-guarded
+	 * TLB 4:	64M	Cacheable, non-guarded
 	 * 0xf4000000	64M	LBC SDRAM Second half
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000,
 		      CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 5, BOOKE_PAGESZ_64M, 1),
+		      0, 4, BOOKE_PAGESZ_64M, 1),
 
 	/*
-	 * TLB 6:	16M	Cacheable, non-guarded
+	 * TLB 5:	16M	Cacheable, non-guarded
 	 * 0xf8000000	1M	7-segment LED display
 	 * 0xf8100000	1M	User switches
 	 * 0xf8300000	1M	Board revision
@@ -110,24 +100,24 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_EPLD_BASE, CONFIG_SYS_EPLD_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 6, BOOKE_PAGESZ_16M, 1),
+		      0, 5, BOOKE_PAGESZ_16M, 1),
 
 	/*
-	 * TLB 7:	4M	Non-cacheable, guarded
+	 * TLB 6:	4M	Non-cacheable, guarded
 	 * 0xfb800000	4M	1st 4MB block of 64MB user FLASH
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH, CONFIG_SYS_ALT_FLASH,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 7, BOOKE_PAGESZ_4M, 1),
+		      0, 6, BOOKE_PAGESZ_4M, 1),
 
 	/*
-	 * TLB 8:	4M	Non-cacheable, guarded
+	 * TLB 7:	4M	Non-cacheable, guarded
 	 * 0xfbc00000	4M	2nd 4MB block of 64MB user FLASH
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH + 0x400000,
 		      CONFIG_SYS_ALT_FLASH + 0x400000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 8, BOOKE_PAGESZ_4M, 1),
+		      0, 7, BOOKE_PAGESZ_4M, 1),
 
 };
 
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
index 7bf81799e5..c5fe92e061 100644
--- a/board/sbc8560/sbc8560.c
+++ b/board/sbc8560/sbc8560.c
@@ -38,8 +38,6 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 
-long int fixed_sdram (void);
-
 /*
  * I/O Port configuration table
  *
@@ -263,95 +261,6 @@ int checkboard (void)
 }
 
 
-phys_size_t initdram (int board_type)
-{
-	long dram_size = 0;
-
-#if 0
-#if !defined(CONFIG_RAM_AS_FLASH)
-	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-	sys_info_t sysinfo;
-	uint temp_lbcdll = 0;
-#endif
-#endif /* 0 */
-#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#endif
-#if defined(CONFIG_DDR_DLL)
-	uint temp_ddrdll = 0;
-
-	/* Work around to stabilize DDR DLL */
-	temp_ddrdll = gur->ddrdllcr;
-	gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-	asm("sync;isync;msync");
-#endif
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-#else
-	dram_size = fixed_sdram ();
-#endif
-
-#if 0
-#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
-	get_sys_info(&sysinfo);
-	/* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
-	if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) {
-		lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
-	} else {
-#if defined(CONFIG_MPC85xx_REV1) /* need change CLKDIV before enable DLL */
-		lbc->lcrr = 0x10000004; /* default CLKDIV is 8, change it to 4 temporarily */
-#endif
-		lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff;
-		udelay(200);
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
-		asm("sync;isync;msync");
-	}
-	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */
-	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
-	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;
-	asm("sync");
-	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
-	asm("sync");
-	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
-	asm("sync");
-#endif
-#endif
-
-#if defined(CONFIG_DDR_ECC)
-	{
-		/* Initialize all of memory for ECC, then
-		 * enable errors */
-		volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-
-		dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
-
-		/* Enable errors for ECC */
-		ddr->err_disable = 0x00000000;
-		asm("sync;isync;msync");
-	}
-#endif
-
-	return dram_size;
-}
-
-
 #if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
@@ -390,7 +299,7 @@ int testdram (void)
 /*************************************************************************
  *  fixed sdram init -- doesn't use serial presence detect.
  ************************************************************************/
-long int fixed_sdram (void)
+phys_size_t fixed_sdram(void)
 {
 
 #define CONFIG_SYS_DDR_CONTROL 0xc2000000
diff --git a/board/socrates/sdram.c b/board/socrates/sdram.c
index ef897b216e..c8235f4a9b 100644
--- a/board/socrates/sdram.c
+++ b/board/socrates/sdram.c
@@ -39,7 +39,7 @@
  *       so this should be extended for other future boards
  *       using this routine!
  */
-long int fixed_sdram(void)
+phys_size_t fixed_sdram(void)
 {
 	volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
 
@@ -77,19 +77,6 @@ long int fixed_sdram(void)
 }
 #endif
 
-phys_size_t initdram (int board_type)
-{
-	long dram_size = 0;
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-#else
-	dram_size = fixed_sdram();
-#endif
-	return dram_size;
-}
-
 #if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
diff --git a/board/stx/stxgp3/stxgp3.c b/board/stx/stxgp3/stxgp3.c
index 1ed340efe7..de22bf5e0a 100644
--- a/board/stx/stxgp3/stxgp3.c
+++ b/board/stx/stxgp3/stxgp3.c
@@ -40,8 +40,6 @@
 #include <spd_sdram.h>
 #include <miiphy.h>
 
-long int fixed_sdram (void);
-
 /*
  * I/O Port configuration table
  *
@@ -277,36 +275,6 @@ show_activity(int flag)
 	next_led_update += (get_tbclk() / 4);
 }
 
-phys_size_t
-initdram (int board_type)
-{
-	long dram_size = 0;
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-		uint temp_ddrdll = 0;
-
-		/* Work around to stabilize DDR DLL */
-		temp_ddrdll = gur->ddrdllcr;
-		gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-		asm("sync;isync;msync");
-	}
-#endif
-
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-#if defined(CONFIG_DDR_ECC)
-	/* Initialize and enable DDR ECC.
-	*/
-	ddr_enable_ecc(dram_size);
-#endif
-
-	return dram_size;
-}
-
 
 #if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
diff --git a/board/stx/stxssa/stxssa.c b/board/stx/stxssa/stxssa.c
index 6cd28a34b9..83ffcd2b92 100644
--- a/board/stx/stxssa/stxssa.c
+++ b/board/stx/stxssa/stxssa.c
@@ -41,8 +41,6 @@
 #include <miiphy.h>
 #include <netdev.h>
 
-long int fixed_sdram (void);
-
 /*
  * I/O Port configuration table
  *
@@ -294,37 +292,6 @@ show_activity(int flag)
 	next_led_update += (get_tbclk() / 4);
 }
 
-phys_size_t
-initdram (int board_type)
-{
-	long dram_size = 0;
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-		uint temp_ddrdll = 0;
-
-		/* Work around to stabilize DDR DLL */
-		temp_ddrdll = gur->ddrdllcr;
-		gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-		asm("sync;isync;msync");
-	}
-#endif
-
-	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-#if defined(CONFIG_DDR_ECC)
-	/* Initialize and enable DDR ECC.
-	*/
-	ddr_enable_ecc(dram_size);
-#endif
-
-	return dram_size;
-}
-
-
 #if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
diff --git a/board/tqc/tqm85xx/sdram.c b/board/tqc/tqm85xx/sdram.c
index 260cd1c6dd..b2d3185351 100644
--- a/board/tqc/tqm85xx/sdram.c
+++ b/board/tqc/tqm85xx/sdram.c
@@ -394,43 +394,6 @@ static phys_size_t sdram_setup(int casl)
 	return (i < N_DDR_CS_CONF) ? ddr_cs_conf[i].size : 0;
 }
 
-phys_size_t initdram (int board_type)
-{
-	phys_size_t dram_size = 0;
-
-#if defined(CONFIG_DDR_DLL)
-	/*
-	 * This DLL-Override only used on TQM8540 and TQM8560
-	 */
-	{
-		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-		int i, x;
-
-		x = 10;
-
-		/*
-		 * Work around to stabilize DDR DLL
-		 */
-		gur->ddrdllcr = 0x81000000;
-		asm ("sync; isync; msync");
-		udelay (200);
-		while (gur->ddrdllcr != 0x81000100) {
-			gur->devdisr = gur->devdisr | 0x00010000;
-			asm ("sync; isync; msync");
-			for (i = 0; i < x; i++)
-				;
-			gur->devdisr = gur->devdisr & 0xfff7ffff;
-			asm ("sync; isync; msync");
-			x++;
-		}
-	}
-#endif
-
-	dram_size = fixed_sdram();
-
-	return dram_size;
-}
-
 #if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c
index 75dd348aa5..f9f8cc9a01 100644
--- a/board/tqc/tqm85xx/tlb.c
+++ b/board/tqc/tqm85xx/tlb.c
@@ -120,36 +120,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 6, BOOKE_PAGESZ_64M, 1),
-
-#if defined(CONFIG_TQM8548_AG) || defined (CONFIG_TQM8548_BE)
-	/*
-	 * TLB 7+8:	  2G	 DDR, cache enabled
-	 * 0x00000000	  2G	 DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 */
-	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		       MAS3_SX | MAS3_SW | MAS3_SR, 0,
-		       0, 7, BOOKE_PAGESZ_1G, 1),
-
-	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
-		       CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
-		       MAS3_SX | MAS3_SW | MAS3_SR, 0,
-		       0, 8, BOOKE_PAGESZ_1G, 1),
-#else
-	/*
-	 * TLB 7+8:	512M	 DDR, cache disabled (needed for memory test)
-	 * 0x00000000	512M	 DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 */
-	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-		       0, 7, BOOKE_PAGESZ_256M, 1),
-
-	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-		       CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-		       0, 8, BOOKE_PAGESZ_256M, 1),
-#endif
 #ifdef CONFIG_PCIE1
 	/*
 	 * TLB 9:	 16M	Non-cacheable, guarded
@@ -228,23 +198,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 7, BOOKE_PAGESZ_64M, 1),
-
-	/*
-	 * TLB 8+9:	512M	 DDR, cache disabled (needed for memory test)
-	 * 0x00000000	512M	 DDR System memory
-	 * Without SPD EEPROM configured DDR, this must be setup manually.
-	 * Make sure the TLB count at the top of this table is correct.
-	 * Likely it needs to be increased by two for these entries.
-	 */
-	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-		       0, 8, BOOKE_PAGESZ_256M, 1),
-
-	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-		       CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-		       0, 9, BOOKE_PAGESZ_256M, 1),
-
 #ifdef CONFIG_PCIE1
 	/*
 	 * TLB 10:	 16M	Non-cacheable, guarded
diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile
index 7604f626bb..39d105fcdd 100644
--- a/board/xes/common/Makefile
+++ b/board/xes/common/Makefile
@@ -33,8 +33,6 @@ COBJS-$(CONFIG_FSL_PCI_INIT)	+= fsl_8xxx_pci.o
 COBJS-$(CONFIG_MPC8572)		+= fsl_8xxx_clk.o
 COBJS-$(CONFIG_MPC86xx)		+= fsl_8xxx_clk.o
 COBJS-$(CONFIG_P2020)		+= fsl_8xxx_clk.o
-COBJS-$(CONFIG_FSL_DDR2)	+= fsl_8xxx_ddr.o
-COBJS-$(CONFIG_FSL_DDR3)	+= fsl_8xxx_ddr.o
 COBJS-$(CONFIG_MPC85xx)		+= fsl_8xxx_misc.o board.o
 COBJS-$(CONFIG_MPC86xx)		+= fsl_8xxx_misc.o board.o
 COBJS-$(CONFIG_NAND_ACTL)	+= actl_nand.o
diff --git a/board/xes/common/fsl_8xxx_ddr.c b/board/xes/common/fsl_8xxx_ddr.c
deleted file mode 100644
index 81ee70d5a1..0000000000
--- a/board/xes/common/fsl_8xxx_ddr.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright 2008 Extreme Engineering Solutions, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-phys_size_t initdram(int board_type)
-{
-	phys_size_t dram_size = fsl_ddr_sdram();
-
-#ifdef CONFIG_MPC85xx
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-#endif
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/* Initialize and enable DDR ECC */
-	ddr_enable_ecc(dram_size);
-#endif
-
-	return dram_size;
-}
diff --git a/board/xes/xpedite517x/xpedite517x.c b/board/xes/xpedite517x/xpedite517x.c
index 0f7fa6c43a..572a908004 100644
--- a/board/xes/xpedite517x/xpedite517x.c
+++ b/board/xes/xpedite517x/xpedite517x.c
@@ -22,6 +22,7 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/fsl_ddr_sdram.h>
 #include <asm/mmu.h>
 #include <asm/io.h>
 #include <fdt_support.h>
@@ -71,6 +72,18 @@ int board_early_init_r(void)
 	return 0;
 }
 
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size = fsl_ddr_sdram();
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/* Initialize and enable DDR ECC */
+	ddr_enable_ecc(dram_size);
+#endif
+
+	return dram_size;
+}
+
 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 890d6d9d4c..febe95da89 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -147,6 +147,10 @@
  * DDR Setup
  */
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory	*/
+#if defined(CONFIG_TQM_BIGFLASH) || \
+	(!defined(CONFIG_TQM8548_AG) && !defined(CONFIG_TQM8548_BE))
+#define CONFIG_SYS_PPC_DDR_WIMGE (MAS2_I | MAS2_G)
+#endif
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #ifdef CONFIG_TQM8548_AG
 #define CONFIG_VERY_BIG_RAM