net: phy: introduce fixed_phy_create for DSA CPU ports

The DSA (Distributed Switch Architecture) implementation has made a
design decision when it got introduced to the Linux kernel in 2008.
That was to hide away from the user the CPU-facing Ethernet MAC, since
it does not make sense to register it as a struct net_device (UCLASS_ETH
udevice for U-Boot), because that would never be beneficial for a user:
they would not be able to use it for traffic, since conceptually, a
packet delivered to the CPU port should loop back into the system.

Nonetheless, DSA has had numerous growing pains due to the lack of a
struct net_device for the CPU port, but so far it has overcome them.
It is unlikely at this stage of maturity that this aspect of it will
change.

We would like U-Boot to present the same information as Linux, to be at
parity in terms of number of interfaces, so that ethNaddr environment
variables could directly be associated between U-Boot and Linux.
Therefore, we would implicitly like U-Boot to hide the CPU port from the
user as well.

But the paradox is that DSA still needs a struct phy_device to inform
the driver of the parameters of the link that it should configure the
CPU port to. The problem is that the phy_device is typically returned
via a call to phy_connect, which needs an udevice to attach the PHY to,
and to search its ofnode for the 'fixed-link' property. But we don't
have an udevice to present for the CPU port.

Since 99% of DSA setups are MAC-to-MAC connections between the switch
and the host Ethernet controller, the struct phy_device is going to be a
fixed PHY. This simplifies things quite a bit. In U-Boot, a fixed PHY
does not need an MDIO bus, and does not need an attached dev either.
Basically, the phy_connect call doesn't do any connection, it just
creates the fixed PHY.

The proposal of this patch is to introduce a new fixed_phy_create
function which will take a single argument: the ofnode that holds this:

	port@4 {
		reg = <4>;
		phy-mode = "internal";

		fixed-link {
			speed = <2500>;
			full-duplex;
		};
	};

and probe a fixed PHY driver using the information from this ofnode.
DSA will probably be the only user of this function.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>

2 files changed, 52 insertions, 0 deletions

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index a2be398736..89e3076bfd 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -977,6 +977,37 @@ static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus,
 #endif
 
 #ifdef CONFIG_PHY_FIXED
+/**
+ * fixed_phy_create() - create an unconnected fixed-link pseudo-PHY device
+ * @node: OF node for the container of the fixed-link node
+ *
+ * Description: Creates a struct phy_device based on a fixed-link of_node
+ * description. Can be used without phy_connect by drivers which do not expose
+ * a UCLASS_ETH udevice.
+ */
+struct phy_device *fixed_phy_create(ofnode node)
+{
+	phy_interface_t interface = PHY_INTERFACE_MODE_NONE;
+	const char *if_str;
+	ofnode subnode;
+
+	if_str = ofnode_read_string(node, "phy-mode");
+	if (!if_str) {
+		if_str = ofnode_read_string(node, "phy-interface-type");
+	}
+	if (if_str) {
+		interface = phy_get_interface_by_name(if_str);
+	}
+
+	subnode = ofnode_find_subnode(node, "fixed-link");
+	if (!ofnode_valid(subnode)) {
+		return NULL;
+	}
+
+	return phy_device_create(NULL, ofnode_to_offset(subnode), PHY_FIXED_ID,
+				 false, interface);
+}
+
 #ifdef CONFIG_DM_ETH
 static struct phy_device *phy_connect_fixed(struct mii_dev *bus,
 					    struct udevice *dev,
diff --git a/include/phy.h b/include/phy.h
index 7750efd8bb..2754421ed4 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -402,6 +402,27 @@ int phy_reset(struct phy_device *phydev);
 struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask,
 		phy_interface_t interface);
 
+#ifdef CONFIG_PHY_FIXED
+
+/**
+ * fixed_phy_create() - create an unconnected fixed-link pseudo-PHY device
+ * @node: OF node for the container of the fixed-link node
+ *
+ * Description: Creates a struct phy_device based on a fixed-link of_node
+ * description. Can be used without phy_connect by drivers which do not expose
+ * a UCLASS_ETH udevice.
+ */
+struct phy_device *fixed_phy_create(ofnode node);
+
+#else
+
+static inline struct phy_device *fixed_phy_create(ofnode node)
+{
+	return NULL;
+}
+
+#endif
+
 #ifdef CONFIG_DM_ETH
 
 /**