Merge tag 'video-for-2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-video

- panel bridge support in stm32 ltdc
- DSI host uclass
- sandbox DSI host uclass test driver and DSI host test
- MIPI DSI helpers
- Synopsys Designware MIPI DSI host bridge driver
- STM32 DSI controller driver
- OTM800A and RM68200 panel support
- DSI host updates for stm32f769 and stm32mp1 dtsi files
- splash screen for stm32f769 and stm32mp1 boards
- stm32 defconfig updates for display support

30 files changed, 3941 insertions, 61 deletions

diff --git a/arch/arm/dts/stm32f769-disco-u-boot.dtsi b/arch/arm/dts/stm32f769-disco-u-boot.dtsi
index 209a82c9cf..c1d7d6b8f5 100644
--- a/arch/arm/dts/stm32f769-disco-u-boot.dtsi
+++ b/arch/arm/dts/stm32f769-disco-u-boot.dtsi
@@ -28,10 +28,72 @@
 		button-gpio = <&gpioa 0 0>;
 	};
 
+	dsi_host: dsi_host {
+		compatible = "synopsys,dw-mipi-dsi";
+		status = "okay";
+	};
+
 	led1 {
 		compatible = "st,led1";
 		led-gpio = <&gpioj 5 0>;
 	};
+
+	panel: panel {
+		compatible = "orisetech,otm8009a";
+		reset-gpios = <&gpioj 15 1>;
+		status = "okay";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+
+	soc {
+		dsi: dsi@40016c00 {
+			compatible = "st,stm32-dsi";
+			reg = <0x40016C00 0x800>;
+			resets = <&rcc STM32F7_APB2_RESET(DSI)>;
+			clocks =  <&rcc 0 STM32F7_APB2_CLOCK(DSI)>,
+				  <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>,
+				  <&clk_hse>;
+			clock-names = "pclk", "px_clk", "ref";
+			u-boot,dm-pre-reloc;
+			status = "okay";
+
+			ports {
+				port@0 {
+					dsi_out: endpoint {
+						remote-endpoint = <&panel_in>;
+					};
+				};
+				port@1 {
+					dsi_in: endpoint {
+						remote-endpoint = <&dp_out>;
+					};
+				};
+			};
+		};
+
+		ltdc: display-controller@40016800 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x40016800 0x200>;
+			resets = <&rcc STM32F7_APB2_RESET(LTDC)>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>;
+
+			status = "okay";
+			u-boot,dm-pre-reloc;
+
+			ports {
+				port@0 {
+					dp_out: endpoint {
+						remote-endpoint = <&dsi_in>;
+					};
+				};
+			};
+		};
+	};
 };
 
 &fmc {
diff --git a/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi b/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi
index 18ac1e3cb2..cd9947f166 100644
--- a/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi
@@ -5,6 +5,13 @@
 
 #include "stm32mp157a-dk1-u-boot.dtsi"
 
+/ {
+	dsi_host: dsi_host {
+		compatible = "synopsys,dw-mipi-dsi";
+		status = "okay";
+	};
+};
+
 &i2c1 {
 	hdmi-transmitter@39 {
 		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
index ec60486f41..af5945d20b 100644
--- a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
@@ -14,6 +14,11 @@
 		spi0 = &qspi;
 		usb0 = &usbotg_hs;
 	};
+
+	dsi_host: dsi_host {
+		compatible = "synopsys,dw-mipi-dsi";
+		status = "okay";
+	};
 };
 
 &flash0 {
diff --git a/arch/sandbox/dts/sandbox.dts b/arch/sandbox/dts/sandbox.dts
index 16a33db87d..f1637c80f6 100644
--- a/arch/sandbox/dts/sandbox.dts
+++ b/arch/sandbox/dts/sandbox.dts
@@ -25,6 +25,11 @@
 		compatible = "google,cros-ec-sandbox";
 	};
 
+	dsi_host: dsi_host {
+		compatible = "sandbox,dsi-host";
+		status = "okay";
+	};
+
 	ethrawbus {
 		compatible = "sandbox,eth-raw-bus";
 		skip-localhost = <0>;
@@ -63,7 +68,6 @@
 		compatible = "sandbox,spi";
 		cs-gpios = <0>, <&gpio_a 0>;
 	};
-
 };
 
 #include "sandbox.dtsi"
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index 25cac056bb..5d9ab3724f 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -76,6 +76,10 @@
 		};
 	};
 
+	dsi_host: dsi_host {
+		compatible = "sandbox,dsi-host";
+	};
+
 	a-test {
 		reg = <0 1>;
 		compatible = "denx,u-boot-fdt-test";
diff --git a/board/st/stm32f746-disco/MAINTAINERS b/board/st/stm32f746-disco/MAINTAINERS
index 2df0a65ac2..3bbb513ad7 100644
--- a/board/st/stm32f746-disco/MAINTAINERS
+++ b/board/st/stm32f746-disco/MAINTAINERS
@@ -4,3 +4,4 @@ S:	Maintained
 F:	board/st/stm32f746-disco
 F:	include/configs/stm32f746-disco.h
 F:	configs/stm32f746-disco_defconfig
+F:	configs/stm32f769-disco_defconfig
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index f77b9e8a7d..3f2dc99277 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -206,6 +206,7 @@ CONFIG_CONSOLE_ROTATION=y
 CONFIG_CONSOLE_TRUETYPE=y
 CONFIG_CONSOLE_TRUETYPE_CANTORAONE=y
 CONFIG_VIDEO_SANDBOX_SDL=y
+CONFIG_VIDEO_DSI_HOST_SANDBOX=y
 CONFIG_OSD=y
 CONFIG_SANDBOX_OSD=y
 CONFIG_W1=y
diff --git a/configs/stm32f769-disco_defconfig b/configs/stm32f769-disco_defconfig
new file mode 100644
index 0000000000..887e2d5f7c
--- /dev/null
+++ b/configs/stm32f769-disco_defconfig
@@ -0,0 +1,63 @@
+CONFIG_ARM=y
+CONFIG_STM32=y
+CONFIG_SYS_TEXT_BASE=0x08008000
+CONFIG_SYS_MALLOC_F_LEN=0xE00
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_STM32F7=y
+CONFIG_TARGET_STM32F746_DISCO=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
+# CONFIG_USE_BOOTCOMMAND is not set
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x8000000
+CONFIG_SYS_PROMPT="U-Boot > "
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
+CONFIG_AUTOBOOT_STOP_STR=" "
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIMER=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="stm32f769-disco"
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_DM_MMC=y
+# CONFIG_SPL_DM_MMC is not set
+CONFIG_ARM_PL180_MMCI=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MII=y
+# CONFIG_PINCTRL_FULL is not set
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_STM32_QSPI=y
+CONFIG_DM_VIDEO=y
+CONFIG_BACKLIGHT_GPIO=y
+CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
+CONFIG_VIDEO_STM32=y
+CONFIG_VIDEO_STM32_DSI=y
+CONFIG_VIDEO_STM32_MAX_XRES=480
+CONFIG_VIDEO_STM32_MAX_YRES=800
+CONFIG_OF_LIBFDT_OVERLAY=y
+# CONFIG_EFI_LOADER is not set
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index f6c68feb6f..c54feb03e6 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -124,4 +124,10 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_DM_VIDEO=y
 CONFIG_BACKLIGHT_GPIO=y
+CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
+CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
+CONFIG_VIDEO_STM32=y
+CONFIG_VIDEO_STM32_DSI=y
+CONFIG_VIDEO_STM32_MAX_XRES=1280
+CONFIG_VIDEO_STM32_MAX_YRES=800
 CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/stm32mp15_optee_defconfig b/configs/stm32mp15_optee_defconfig
index 177cbc7d5f..491174fc15 100644
--- a/configs/stm32mp15_optee_defconfig
+++ b/configs/stm32mp15_optee_defconfig
@@ -109,4 +109,10 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_DM_VIDEO=y
 CONFIG_BACKLIGHT_GPIO=y
+CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
+CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
+CONFIG_VIDEO_STM32=y
+CONFIG_VIDEO_STM32_DSI=y
+CONFIG_VIDEO_STM32_MAX_XRES=1280
+CONFIG_VIDEO_STM32_MAX_YRES=800
 CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
index 71ad1157ec..a8a7eec357 100644
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@@ -108,4 +108,10 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_DM_VIDEO=y
 CONFIG_BACKLIGHT_GPIO=y
+CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
+CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
+CONFIG_VIDEO_STM32=y
+CONFIG_VIDEO_STM32_DSI=y
+CONFIG_VIDEO_STM32_MAX_XRES=1280
+CONFIG_VIDEO_STM32_MAX_YRES=800
 CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 261fa98517..805713c08b 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -73,6 +73,14 @@ config VIDEO_ANSI
 	  Enable ANSI escape sequence decoding for a more fully functional
 	  console.
 
+config VIDEO_MIPI_DSI
+	bool "Support MIPI DSI interface"
+	depends on DM_VIDEO
+	help
+	  Support MIPI DSI interface for driving a MIPI compatible device.
+	  The MIPI Display Serial Interface (MIPI DSI) defines a high-speed
+	  serial interface between a host processor and a display module.
+
 config CONSOLE_NORMAL
 	bool "Support a simple text console"
 	depends on DM_VIDEO
@@ -320,6 +328,24 @@ config VIDEO_LCD_ANX9804
 	from a parallel LCD interface and translate it on the fy into a DP
 	interface for driving eDP TFT displays. It uses I2C for configuration.
 
+config VIDEO_LCD_ORISETECH_OTM8009A
+	bool "OTM8009A DSI LCD panel support"
+	depends on DM_VIDEO
+	select VIDEO_MIPI_DSI
+	default n
+	help
+	Say Y here if you want to enable support for Orise Technology
+	otm8009a 480x800 dsi 2dl panel.
+
+config VIDEO_LCD_RAYDIUM_RM68200
+	bool "RM68200 DSI LCD panel support"
+	depends on DM_VIDEO
+	select VIDEO_MIPI_DSI
+	default n
+	help
+	Say Y here if you want to enable support for Raydium RM68200
+	720x1280 DSI video mode panel.
+
 config VIDEO_LCD_SSD2828
 	bool "SSD2828 bridge chip"
 	default n
@@ -678,6 +704,27 @@ config VIDEO_DW_HDMI
 	  rather requires a SoC-specific glue driver to call it), it
 	  can not be enabled from the configuration menu.
 
+config VIDEO_DSI_HOST_SANDBOX
+	bool "Enable sandbox for dsi host"
+	depends on SANDBOX
+	select VIDEO_MIPI_DSI
+	help
+	  Enable support for sandbox dsi host device used for testing
+	  purposes.
+	  Display Serial Interface (DSI) defines a serial bus and
+	  a communication protocol between the host and the device
+	  (panel, bridge).
+
+config VIDEO_DW_MIPI_DSI
+	bool
+	select VIDEO_MIPI_DSI
+	help
+	  Enables the common driver code for the Synopsis Designware
+	  MIPI DSI block found in SoCs from various vendors.
+	  As this does not provide any functionality by itself (but
+	  rather requires a SoC-specific glue driver to call it), it
+	  can not be enabled from the configuration menu.
+
 config VIDEO_SIMPLE
 	bool "Simple display driver for preconfigured display"
 	help
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 349a207035..df7119d62a 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o
 obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/
 obj-$(CONFIG_DISPLAY) += display-uclass.o
 obj-$(CONFIG_DM_VIDEO) += backlight-uclass.o
+obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi-host-uclass.o
 obj-$(CONFIG_DM_VIDEO) += panel-uclass.o simple_panel.o
 obj-$(CONFIG_DM_VIDEO) += video-uclass.o vidconsole-uclass.o
 obj-$(CONFIG_DM_VIDEO) += video_bmp.o
@@ -44,19 +45,24 @@ obj-$(CONFIG_VIDEO_BROADWELL_IGD) += broadwell_igd.o
 obj-$(CONFIG_VIDEO_COREBOOT) += coreboot.o
 obj-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o
 obj-$(CONFIG_VIDEO_DW_HDMI) += dw_hdmi.o
+obj-$(CONFIG_VIDEO_DW_MIPI_DSI) += dw_mipi_dsi.o
 obj-$(CONFIG_VIDEO_EFI) += efi.o
 obj-$(CONFIG_VIDEO_FSL_DCU_FB) += fsl_dcu_fb.o videomodes.o
 obj-$(CONFIG_VIDEO_IPUV3) += imx/
 obj-$(CONFIG_VIDEO_IVYBRIDGE_IGD) += ivybridge_igd.o
 obj-$(CONFIG_VIDEO_LCD_ANX9804) += anx9804.o
 obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
+obj-$(CONFIG_VIDEO_LCD_ORISETECH_OTM8009A) += orisetech_otm8009a.o
+obj-$(CONFIG_VIDEO_LCD_RAYDIUM_RM68200) += raydium-rm68200.o
 obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
 obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
 obj-${CONFIG_VIDEO_MESON} += meson/
+obj-${CONFIG_VIDEO_MIPI_DSI} += mipi_dsi.o
 obj-$(CONFIG_VIDEO_MVEBU) += mvebu_lcd.o
 obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o
 obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o
 obj-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o
+obj-$(CONFIG_VIDEO_DSI_HOST_SANDBOX) += sandbox_dsi_host.o
 obj-$(CONFIG_VIDEO_SANDBOX_SDL) += sandbox_sdl.o
 obj-$(CONFIG_VIDEO_SIMPLE) += simplefb.o
 obj-$(CONFIG_VIDEO_TEGRA20) += tegra.o
diff --git a/drivers/video/dsi-host-uclass.c b/drivers/video/dsi-host-uclass.c
new file mode 100644
index 0000000000..1db1f88a17
--- /dev/null
+++ b/drivers/video/dsi-host-uclass.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
+ * Author(s): Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dsi_host.h>
+
+int dsi_host_init(struct udevice *dev,
+		  struct mipi_dsi_device *device,
+		  struct display_timing *timings,
+		  unsigned int max_data_lanes,
+		  const struct mipi_dsi_phy_ops *phy_ops)
+{
+	struct dsi_host_ops *ops = dsi_host_get_ops(dev);
+
+	if (!ops->init)
+		return -ENOSYS;
+
+	return ops->init(dev, device, timings, max_data_lanes, phy_ops);
+}
+
+int dsi_host_enable(struct udevice *dev)
+{
+	struct dsi_host_ops *ops = dsi_host_get_ops(dev);
+
+	if (!ops->enable)
+		return -ENOSYS;
+
+	return ops->enable(dev);
+}
+
+UCLASS_DRIVER(dsi_host) = {
+	.id		= UCLASS_DSI_HOST,
+	.name		= "dsi_host",
+};
diff --git a/drivers/video/dw_mipi_dsi.c b/drivers/video/dw_mipi_dsi.c
new file mode 100644
index 0000000000..04b07e3a2c
--- /dev/null
+++ b/drivers/video/dw_mipi_dsi.c
@@ -0,0 +1,838 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016, Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
+ * Author(s): Philippe Cornu <philippe.cornu@st.com> for STMicroelectronics.
+ *            Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
+ *
+ * This generic Synopsys DesignWare MIPI DSI host driver is inspired from
+ * the Linux Kernel driver drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c.
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dsi_host.h>
+#include <dm.h>
+#include <errno.h>
+#include <panel.h>
+#include <video.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+#include <dm/device-internal.h>
+#include <linux/iopoll.h>
+#include <video_bridge.h>
+
+#define HWVER_131			0x31333100	/* IP version 1.31 */
+
+#define DSI_VERSION			0x00
+#define VERSION				GENMASK(31, 8)
+
+#define DSI_PWR_UP			0x04
+#define RESET				0
+#define POWERUP				BIT(0)
+
+#define DSI_CLKMGR_CFG			0x08
+#define TO_CLK_DIVISION(div)		(((div) & 0xff) << 8)
+#define TX_ESC_CLK_DIVISION(div)	((div) & 0xff)
+
+#define DSI_DPI_VCID			0x0c
+#define DPI_VCID(vcid)			((vcid) & 0x3)
+
+#define DSI_DPI_COLOR_CODING		0x10
+#define LOOSELY18_EN			BIT(8)
+#define DPI_COLOR_CODING_16BIT_1	0x0
+#define DPI_COLOR_CODING_16BIT_2	0x1
+#define DPI_COLOR_CODING_16BIT_3	0x2
+#define DPI_COLOR_CODING_18BIT_1	0x3
+#define DPI_COLOR_CODING_18BIT_2	0x4
+#define DPI_COLOR_CODING_24BIT		0x5
+
+#define DSI_DPI_CFG_POL			0x14
+#define COLORM_ACTIVE_LOW		BIT(4)
+#define SHUTD_ACTIVE_LOW		BIT(3)
+#define HSYNC_ACTIVE_LOW		BIT(2)
+#define VSYNC_ACTIVE_LOW		BIT(1)
+#define DATAEN_ACTIVE_LOW		BIT(0)
+
+#define DSI_DPI_LP_CMD_TIM		0x18
+#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
+#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
+
+#define DSI_DBI_VCID			0x1c
+#define DSI_DBI_CFG			0x20
+#define DSI_DBI_PARTITIONING_EN		0x24
+#define DSI_DBI_CMDSIZE			0x28
+
+#define DSI_PCKHDL_CFG			0x2c
+#define CRC_RX_EN			BIT(4)
+#define ECC_RX_EN			BIT(3)
+#define BTA_EN				BIT(2)
+#define EOTP_RX_EN			BIT(1)
+#define EOTP_TX_EN			BIT(0)
+
+#define DSI_GEN_VCID			0x30
+
+#define DSI_MODE_CFG			0x34
+#define ENABLE_VIDEO_MODE		0
+#define ENABLE_CMD_MODE			BIT(0)
+
+#define DSI_VID_MODE_CFG		0x38
+#define ENABLE_LOW_POWER		(0x3f << 8)
+#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
+#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
+#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
+#define VID_MODE_TYPE_BURST			0x2
+#define VID_MODE_TYPE_MASK			0x3
+
+#define DSI_VID_PKT_SIZE		0x3c
+#define VID_PKT_SIZE(p)			((p) & 0x3fff)
+
+#define DSI_VID_NUM_CHUNKS		0x40
+#define VID_NUM_CHUNKS(c)		((c) & 0x1fff)
+
+#define DSI_VID_NULL_SIZE		0x44
+#define VID_NULL_SIZE(b)		((b) & 0x1fff)
+
+#define DSI_VID_HSA_TIME		0x48
+#define DSI_VID_HBP_TIME		0x4c
+#define DSI_VID_HLINE_TIME		0x50
+#define DSI_VID_VSA_LINES		0x54
+#define DSI_VID_VBP_LINES		0x58
+#define DSI_VID_VFP_LINES		0x5c
+#define DSI_VID_VACTIVE_LINES		0x60
+#define DSI_EDPI_CMD_SIZE		0x64
+
+#define DSI_CMD_MODE_CFG		0x68
+#define MAX_RD_PKT_SIZE_LP		BIT(24)
+#define DCS_LW_TX_LP			BIT(19)
+#define DCS_SR_0P_TX_LP			BIT(18)
+#define DCS_SW_1P_TX_LP			BIT(17)
+#define DCS_SW_0P_TX_LP			BIT(16)
+#define GEN_LW_TX_LP			BIT(14)
+#define GEN_SR_2P_TX_LP			BIT(13)
+#define GEN_SR_1P_TX_LP			BIT(12)
+#define GEN_SR_0P_TX_LP			BIT(11)
+#define GEN_SW_2P_TX_LP			BIT(10)
+#define GEN_SW_1P_TX_LP			BIT(9)
+#define GEN_SW_0P_TX_LP			BIT(8)
+#define ACK_RQST_EN			BIT(1)
+#define TEAR_FX_EN			BIT(0)
+
+#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
+					 DCS_LW_TX_LP | \
+					 DCS_SR_0P_TX_LP | \
+					 DCS_SW_1P_TX_LP | \
+					 DCS_SW_0P_TX_LP | \
+					 GEN_LW_TX_LP | \
+					 GEN_SR_2P_TX_LP | \
+					 GEN_SR_1P_TX_LP | \
+					 GEN_SR_0P_TX_LP | \
+					 GEN_SW_2P_TX_LP | \
+					 GEN_SW_1P_TX_LP | \
+					 GEN_SW_0P_TX_LP)
+
+#define DSI_GEN_HDR			0x6c
+#define DSI_GEN_PLD_DATA		0x70
+
+#define DSI_CMD_PKT_STATUS		0x74
+#define GEN_RD_CMD_BUSY			BIT(6)
+#define GEN_PLD_R_FULL			BIT(5)
+#define GEN_PLD_R_EMPTY			BIT(4)
+#define GEN_PLD_W_FULL			BIT(3)
+#define GEN_PLD_W_EMPTY			BIT(2)
+#define GEN_CMD_FULL			BIT(1)
+#define GEN_CMD_EMPTY			BIT(0)
+
+#define DSI_TO_CNT_CFG			0x78
+#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
+#define LPRX_TO_CNT(p)			((p) & 0xffff)
+
+#define DSI_HS_RD_TO_CNT		0x7c
+#define DSI_LP_RD_TO_CNT		0x80
+#define DSI_HS_WR_TO_CNT		0x84
+#define DSI_LP_WR_TO_CNT		0x88
+#define DSI_BTA_TO_CNT			0x8c
+
+#define DSI_LPCLK_CTRL			0x94
+#define AUTO_CLKLANE_CTRL		BIT(1)
+#define PHY_TXREQUESTCLKHS		BIT(0)
+
+#define DSI_PHY_TMR_LPCLK_CFG		0x98
+#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
+#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
+
+#define DSI_PHY_TMR_CFG			0x9c
+#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
+#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
+#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
+#define PHY_HS2LP_TIME_V131(lbcc)	(((lbcc) & 0x3ff) << 16)
+#define PHY_LP2HS_TIME_V131(lbcc)	((lbcc) & 0x3ff)
+
+#define DSI_PHY_RSTZ			0xa0
+#define PHY_DISFORCEPLL			0
+#define PHY_ENFORCEPLL			BIT(3)
+#define PHY_DISABLECLK			0
+#define PHY_ENABLECLK			BIT(2)
+#define PHY_RSTZ			0
+#define PHY_UNRSTZ			BIT(1)
+#define PHY_SHUTDOWNZ			0
+#define PHY_UNSHUTDOWNZ			BIT(0)
+
+#define DSI_PHY_IF_CFG			0xa4
+#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
+#define N_LANES(n)			(((n) - 1) & 0x3)
+
+#define DSI_PHY_ULPS_CTRL		0xa8
+#define DSI_PHY_TX_TRIGGERS		0xac
+
+#define DSI_PHY_STATUS			0xb0
+#define PHY_STOP_STATE_CLK_LANE		BIT(2)
+#define PHY_LOCK			BIT(0)
+
+#define DSI_PHY_TST_CTRL0		0xb4
+#define PHY_TESTCLK			BIT(1)
+#define PHY_UNTESTCLK			0
+#define PHY_TESTCLR			BIT(0)
+#define PHY_UNTESTCLR			0
+
+#define DSI_PHY_TST_CTRL1		0xb8
+#define PHY_TESTEN			BIT(16)
+#define PHY_UNTESTEN			0
+#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
+#define PHY_TESTDIN(n)			((n) & 0xff)
+
+#define DSI_INT_ST0			0xbc
+#define DSI_INT_ST1			0xc0
+#define DSI_INT_MSK0			0xc4
+#define DSI_INT_MSK1			0xc8
+
+#define DSI_PHY_TMR_RD_CFG		0xf4
+#define MAX_RD_TIME_V131(lbcc)		((lbcc) & 0x7fff)
+
+#define PHY_STATUS_TIMEOUT_US		10000
+#define CMD_PKT_STATUS_TIMEOUT_US	20000
+
+#define MSEC_PER_SEC			1000
+
+struct dw_mipi_dsi {
+	struct mipi_dsi_host dsi_host;
+	struct mipi_dsi_device *device;
+	void __iomem *base;
+	unsigned int lane_mbps; /* per lane */
+	u32 channel;
+	unsigned int max_data_lanes;
+	const struct mipi_dsi_phy_ops *phy_ops;
+};
+
+static int dsi_mode_vrefresh(struct display_timing *timings)
+{
+	int refresh = 0;
+	unsigned int calc_val;
+	u32 htotal = timings->hactive.typ + timings->hfront_porch.typ +
+		     timings->hback_porch.typ + timings->hsync_len.typ;
+	u32 vtotal = timings->vactive.typ + timings->vfront_porch.typ +
+		     timings->vback_porch.typ + timings->vsync_len.typ;
+
+	if (htotal > 0 && vtotal > 0) {
+		calc_val = timings->pixelclock.typ;
+		calc_val /= htotal;
+		refresh = (calc_val + vtotal / 2) / vtotal;
+	}
+
+	return refresh;
+}
+
+/*
+ * The controller should generate 2 frames before
+ * preparing the peripheral.
+ */
+static void dw_mipi_dsi_wait_for_two_frames(struct display_timing *timings)
+{
+	int refresh, two_frames;
+
+	refresh = dsi_mode_vrefresh(timings);
+	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
+	mdelay(two_frames);
+}
+
+static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
+{
+	return container_of(host, struct dw_mipi_dsi, dsi_host);
+}
+
+static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
+{
+	writel(val, dsi->base + reg);
+}
+
+static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
+{
+	return readl(dsi->base + reg);
+}
+
+static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
+				   struct mipi_dsi_device *device)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+
+	if (device->lanes > dsi->max_data_lanes) {
+		dev_err(device->dev,
+			"the number of data lanes(%u) is too many\n",
+			device->lanes);
+		return -EINVAL;
+	}
+
+	dsi->channel = device->channel;
+
+	return 0;
+}
+
+static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
+				   const struct mipi_dsi_msg *msg)
+{
+	bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
+	u32 val = 0;
+
+	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
+		val |= ACK_RQST_EN;
+	if (lpm)
+		val |= CMD_MODE_ALL_LP;
+
+	dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
+	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
+}
+
+static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
+{
+	int ret;
+	u32 val, mask;
+
+	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+				 val, !(val & GEN_CMD_FULL),
+				 CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(dsi->dev, "failed to get available command FIFO\n");
+		return ret;
+	}
+
+	dsi_write(dsi, DSI_GEN_HDR, hdr_val);
+
+	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
+	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+				 val, (val & mask) == mask,
+				 CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(dsi->dev, "failed to write command FIFO\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dw_mipi_dsi_write(struct dw_mipi_dsi *dsi,
+			     const struct mipi_dsi_packet *packet)
+{
+	const u8 *tx_buf = packet->payload;
+	int len = packet->payload_length, pld_data_bytes = sizeof(u32), ret;
+	__le32 word;
+	u32 val;
+
+	while (len) {
+		if (len < pld_data_bytes) {
+			word = 0;
+			memcpy(&word, tx_buf, len);
+			dsi_write(dsi, DSI_GEN_PLD_DATA, le32_to_cpu(word));
+			len = 0;
+		} else {
+			memcpy(&word, tx_buf, pld_data_bytes);
+			dsi_write(dsi, DSI_GEN_PLD_DATA, le32_to_cpu(word));
+			tx_buf += pld_data_bytes;
+			len -= pld_data_bytes;
+		}
+
+		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+					 val, !(val & GEN_PLD_W_FULL),
+					 CMD_PKT_STATUS_TIMEOUT_US);
+		if (ret) {
+			dev_err(dsi->dev,
+				"failed to get available write payload FIFO\n");
+			return ret;
+		}
+	}
+
+	word = 0;
+	memcpy(&word, packet->header, sizeof(packet->header));
+	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, le32_to_cpu(word));
+}
+
+static int dw_mipi_dsi_read(struct dw_mipi_dsi *dsi,
+			    const struct mipi_dsi_msg *msg)
+{
+	int i, j, ret, len = msg->rx_len;
+	u8 *buf = msg->rx_buf;
+	u32 val;
+
+	/* Wait end of the read operation */
+	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+				 val, !(val & GEN_RD_CMD_BUSY),
+				 CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(dsi->dev, "Timeout during read operation\n");
+		return ret;
+	}
+
+	for (i = 0; i < len; i += 4) {
+		/* Read fifo must not be empty before all bytes are read */
+		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+					 val, !(val & GEN_PLD_R_EMPTY),
+					 CMD_PKT_STATUS_TIMEOUT_US);
+		if (ret) {
+			dev_err(dsi->dev, "Read payload FIFO is empty\n");
+			return ret;
+		}
+
+		val = dsi_read(dsi, DSI_GEN_PLD_DATA);
+		for (j = 0; j < 4 && j + i < len; j++)
+			buf[i + j] = val >> (8 * j);
+	}
+
+	return ret;
+}
+
+static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
+					 const struct mipi_dsi_msg *msg)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+	struct mipi_dsi_packet packet;
+	int ret, nb_bytes;
+
+	ret = mipi_dsi_create_packet(&packet, msg);
+	if (ret) {
+		dev_err(dsi->dev, "failed to create packet: %d\n", ret);
+		return ret;
+	}
+
+	dw_mipi_message_config(dsi, msg);
+
+	ret = dw_mipi_dsi_write(dsi, &packet);
+	if (ret)
+		return ret;
+
+	if (msg->rx_buf && msg->rx_len) {
+		ret = dw_mipi_dsi_read(dsi, msg);
+		if (ret)
+			return ret;
+		nb_bytes = msg->rx_len;
+	} else {
+		nb_bytes = packet.size;
+	}
+
+	return nb_bytes;
+}
+
+static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
+	.attach = dw_mipi_dsi_host_attach,
+	.transfer = dw_mipi_dsi_host_transfer,
+};
+
+static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
+{
+	struct mipi_dsi_device *device = dsi->device;
+	u32 val;
+
+	/*
+	 * TODO dw drv improvements
+	 * enabling low power is panel-dependent, we should use the
+	 * panel configuration here...
+	 */
+	val = ENABLE_LOW_POWER;
+
+	if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
+		val |= VID_MODE_TYPE_BURST;
+	else if (device->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
+		val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
+	else
+		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
+
+	dsi_write(dsi, DSI_VID_MODE_CFG, val);
+}
+
+static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
+				 unsigned long mode_flags)
+{
+	const struct mipi_dsi_phy_ops *phy_ops = dsi->phy_ops;
+
+	dsi_write(dsi, DSI_PWR_UP, RESET);
+
+	if (mode_flags & MIPI_DSI_MODE_VIDEO) {
+		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
+		dw_mipi_dsi_video_mode_config(dsi);
+		dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
+	} else {
+		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+	}
+
+	if (phy_ops->post_set_mode)
+		phy_ops->post_set_mode(dsi->device, mode_flags);
+
+	dsi_write(dsi, DSI_PWR_UP, POWERUP);
+}
+
+static void dw_mipi_dsi_init_pll(struct dw_mipi_dsi *dsi)
+{
+	/*
+	 * The maximum permitted escape clock is 20MHz and it is derived from
+	 * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
+	 *
+	 *     (lane_mbps >> 3) / esc_clk_division < 20
+	 * which is:
+	 *     (lane_mbps >> 3) / 20 > esc_clk_division
+	 */
+	u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
+
+	dsi_write(dsi, DSI_PWR_UP, RESET);
+
+	/*
+	 * TODO dw drv improvements
+	 * timeout clock division should be computed with the
+	 * high speed transmission counter timeout and byte lane...
+	 */
+	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVISION(10) |
+		  TX_ESC_CLK_DIVISION(esc_clk_division));
+}
+
+static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
+				   struct display_timing *timings)
+{
+	struct mipi_dsi_device *device = dsi->device;
+	u32 val = 0, color = 0;
+
+	switch (device->format) {
+	case MIPI_DSI_FMT_RGB888:
+		color = DPI_COLOR_CODING_24BIT;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		color = DPI_COLOR_CODING_18BIT_2 | LOOSELY18_EN;
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		color = DPI_COLOR_CODING_18BIT_1;
+		break;
+	case MIPI_DSI_FMT_RGB565:
+		color = DPI_COLOR_CODING_16BIT_1;
+		break;
+	}
+
+	if (device->mode_flags & DISPLAY_FLAGS_VSYNC_HIGH)
+		val |= VSYNC_ACTIVE_LOW;
+	if (device->mode_flags & DISPLAY_FLAGS_HSYNC_HIGH)
+		val |= HSYNC_ACTIVE_LOW;
+
+	dsi_write(dsi, DSI_DPI_VCID, DPI_VCID(dsi->channel));
+	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
+	dsi_write(dsi, DSI_DPI_CFG_POL, val);
+	/*
+	 * TODO dw drv improvements
+	 * largest packet sizes during hfp or during vsa/vpb/vfp
+	 * should be computed according to byte lane, lane number and only
+	 * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
+	 */
+	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
+		  | INVACT_LPCMD_TIME(4));
+}
+
+static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_PCKHDL_CFG, CRC_RX_EN | ECC_RX_EN | BTA_EN);
+}
+
+static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
+					    struct display_timing *timings)
+{
+	/*
+	 * TODO dw drv improvements
+	 * only burst mode is supported here. For non-burst video modes,
+	 * we should compute DSI_VID_PKT_SIZE, DSI_VCCR.NUMC &
+	 * DSI_VNPCR.NPSIZE... especially because this driver supports
+	 * non-burst video modes, see dw_mipi_dsi_video_mode_config()...
+	 */
+	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(timings->hactive.typ));
+}
+
+static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
+{
+	const struct mipi_dsi_phy_ops *phy_ops = dsi->phy_ops;
+
+	/*
+	 * TODO dw drv improvements
+	 * compute high speed transmission counter timeout according
+	 * to the timeout clock division (TO_CLK_DIVISION) and byte lane...
+	 */
+	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
+	/*
+	 * TODO dw drv improvements
+	 * the Bus-Turn-Around Timeout Counter should be computed
+	 * according to byte lane...
+	 */
+	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
+	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+
+	if (phy_ops->post_set_mode)
+		phy_ops->post_set_mode(dsi->device, 0);
+}
+
+/* Get lane byte clock cycles. */
+static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
+					   struct display_timing *timings,
+					   u32 hcomponent)
+{
+	u32 frac, lbcc;
+
+	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
+
+	frac = lbcc % (timings->pixelclock.typ / 1000);
+	lbcc = lbcc / (timings->pixelclock.typ / 1000);
+	if (frac)
+		lbcc++;
+
+	return lbcc;
+}
+
+static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
+					  struct display_timing *timings)
+{
+	u32 htotal, hsa, hbp, lbcc;
+
+	htotal = timings->hactive.typ + timings->hfront_porch.typ +
+		 timings->hback_porch.typ + timings->hsync_len.typ;
+
+	hsa = timings->hback_porch.typ;
+	hbp = timings->hsync_len.typ;
+
+	/*
+	 * TODO dw drv improvements
+	 * computations below may be improved...
+	 */
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, timings, htotal);
+	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
+
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, timings, hsa);
+	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
+
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, timings, hbp);
+	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
+}
+
+static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
+					       struct display_timing *timings)
+{
+	u32 vactive, vsa, vfp, vbp;
+
+	vactive = timings->vactive.typ;
+	vsa =  timings->vback_porch.typ;
+	vfp =  timings->vfront_porch.typ;
+	vbp = timings->vsync_len.typ;
+
+	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
+	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
+	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
+	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
+}
+
+static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
+{
+	u32 hw_version;
+
+	/*
+	 * TODO dw drv improvements
+	 * data & clock lane timers should be computed according to panel
+	 * blankings and to the automatic clock lane control mode...
+	 * note: DSI_PHY_TMR_CFG.MAX_RD_TIME should be in line with
+	 * DSI_CMD_MODE_CFG.MAX_RD_PKT_SIZE_LP (see CMD_MODE_ALL_LP)
+	 */
+
+	hw_version = dsi_read(dsi, DSI_VERSION) & VERSION;
+
+	if (hw_version >= HWVER_131) {
+		dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME_V131(0x40) |
+			  PHY_LP2HS_TIME_V131(0x40));
+		dsi_write(dsi, DSI_PHY_TMR_RD_CFG, MAX_RD_TIME_V131(10000));
+	} else {
+		dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40) |
+			  PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
+	}
+
+	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
+		  | PHY_CLKLP2HS_TIME(0x40));
+}
+
+static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
+{
+	struct mipi_dsi_device *device = dsi->device;
+
+	/*
+	 * TODO dw drv improvements
+	 * stop wait time should be the maximum between host dsi
+	 * and panel stop wait times
+	 */
+	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
+		  N_LANES(device->lanes));
+}
+
+static void dw_mipi_dsi_dphy_init(struct dw_mipi_dsi *dsi)
+{
+	/* Clear PHY state */
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
+		  | PHY_RSTZ | PHY_SHUTDOWNZ);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
+}
+
+static void dw_mipi_dsi_dphy_enable(struct dw_mipi_dsi *dsi)
+{
+	u32 val;
+	int ret;
+
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
+		  PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
+
+	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, val,
+				 val & PHY_LOCK, PHY_STATUS_TIMEOUT_US);
+	if (ret)
+		dev_warn(dsi->dev, "failed to wait phy lock state\n");
+
+	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
+				 val, val & PHY_STOP_STATE_CLK_LANE,
+				 PHY_STATUS_TIMEOUT_US);
+	if (ret)
+		dev_warn(dsi->dev, "failed to wait phy clk lane stop state\n");
+}
+
+static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
+{
+	dsi_read(dsi, DSI_INT_ST0);
+	dsi_read(dsi, DSI_INT_ST1);
+	dsi_write(dsi, DSI_INT_MSK0, 0);
+	dsi_write(dsi, DSI_INT_MSK1, 0);
+}
+
+static void dw_mipi_dsi_bridge_set(struct dw_mipi_dsi *dsi,
+				   struct display_timing *timings)
+{
+	const struct mipi_dsi_phy_ops *phy_ops = dsi->phy_ops;
+	struct mipi_dsi_device *device = dsi->device;
+	int ret;
+
+	ret = phy_ops->get_lane_mbps(dsi->device, timings, device->lanes,
+				     device->format, &dsi->lane_mbps);
+	if (ret)
+		dev_warn(dsi->dev, "Phy get_lane_mbps() failed\n");
+
+	dw_mipi_dsi_init_pll(dsi);
+	dw_mipi_dsi_dpi_config(dsi, timings);
+	dw_mipi_dsi_packet_handler_config(dsi);
+	dw_mipi_dsi_video_mode_config(dsi);
+	dw_mipi_dsi_video_packet_config(dsi, timings);
+	dw_mipi_dsi_command_mode_config(dsi);
+	dw_mipi_dsi_line_timer_config(dsi, timings);
+	dw_mipi_dsi_vertical_timing_config(dsi, timings);
+
+	dw_mipi_dsi_dphy_init(dsi);
+	dw_mipi_dsi_dphy_timing_config(dsi);
+	dw_mipi_dsi_dphy_interface_config(dsi);
+
+	dw_mipi_dsi_clear_err(dsi);
+
+	ret = phy_ops->init(dsi->device);
+	if (ret)
+		dev_warn(dsi->dev, "Phy init() failed\n");
+
+	dw_mipi_dsi_dphy_enable(dsi);
+
+	dw_mipi_dsi_wait_for_two_frames(timings);
+
+	/* Switch to cmd mode for panel-bridge pre_enable & panel prepare */
+	dw_mipi_dsi_set_mode(dsi, 0);
+}
+
+static int dw_mipi_dsi_init(struct udevice *dev,
+			    struct mipi_dsi_device *device,
+			    struct display_timing *timings,
+			    unsigned int max_data_lanes,
+			    const struct mipi_dsi_phy_ops *phy_ops)
+{
+	struct dw_mipi_dsi *dsi = dev_get_priv(dev);
+	struct clk clk;
+	int ret;
+
+	if (!phy_ops->init || !phy_ops->get_lane_mbps) {
+		dev_err(device->dev, "Phy not properly configured\n");
+		return -ENODEV;
+	}
+
+	dsi->phy_ops = phy_ops;
+	dsi->max_data_lanes = max_data_lanes;
+	dsi->device = device;
+	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
+	device->host = &dsi->dsi_host;
+
+	dsi->base = (void *)dev_read_addr(device->dev);
+	if ((fdt_addr_t)dsi->base == FDT_ADDR_T_NONE) {
+		dev_err(device->dev, "dsi dt register address error\n");
+		return -EINVAL;
+	}
+
+	ret = clk_get_by_name(device->dev, "px_clk", &clk);
+	if (ret) {
+		dev_err(device->dev, "peripheral clock get error %d\n", ret);
+		return ret;
+	}
+
+	/*  get the pixel clock set by the clock framework */
+	timings->pixelclock.typ = clk_get_rate(&clk);
+
+	dw_mipi_dsi_bridge_set(dsi, timings);
+
+	return 0;
+}
+
+static int dw_mipi_dsi_enable(struct udevice *dev)
+{
+	struct dw_mipi_dsi *dsi = dev_get_priv(dev);
+
+	/* Switch to video mode for panel-bridge enable & panel enable */
+	dw_mipi_dsi_set_mode(dsi, MIPI_DSI_MODE_VIDEO);
+
+	return 0;
+}
+
+struct dsi_host_ops dw_mipi_dsi_ops = {
+	.init = dw_mipi_dsi_init,
+	.enable = dw_mipi_dsi_enable,
+};
+
+static int dw_mipi_dsi_probe(struct udevice *dev)
+{
+	return 0;
+}
+
+static const struct udevice_id dw_mipi_dsi_ids[] = {
+	{ .compatible = "synopsys,dw-mipi-dsi" },
+	{ }
+};
+
+U_BOOT_DRIVER(dw_mipi_dsi) = {
+	.name			= "dw_mipi_dsi",
+	.id			= UCLASS_DSI_HOST,
+	.of_match		= dw_mipi_dsi_ids,
+	.probe			= dw_mipi_dsi_probe,
+	.ops			= &dw_mipi_dsi_ops,
+	.priv_auto_alloc_size	= sizeof(struct dw_mipi_dsi),
+};
+
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
+MODULE_AUTHOR("Yannick Fertré <yannick.fertre@st.com>");
+MODULE_DESCRIPTION("DW MIPI DSI host controller driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:dw-mipi-dsi");
diff --git a/drivers/video/mipi_dsi.c b/drivers/video/mipi_dsi.c
new file mode 100644
index 0000000000..cdc3ef58ab
--- /dev/null
+++ b/drivers/video/mipi_dsi.c
@@ -0,0 +1,828 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MIPI DSI Bus
+ *
+ * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
+ * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
+ * Andrzej Hajda <a.hajda@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Mipi_dsi.c contains a set of dsi helpers.
+ * This file is inspired from the drm helper file drivers/gpu/drm/drm_mipi_dsi.c
+ * (kernel linux).
+ *
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <display.h>
+#include <dm.h>
+#include <mipi_display.h>
+#include <mipi_dsi.h>
+
+/**
+ * DOC: dsi helpers
+ *
+ * These functions contain some common logic and helpers to deal with MIPI DSI
+ * peripherals.
+ *
+ * Helpers are provided for a number of standard MIPI DSI command as well as a
+ * subset of the MIPI DCS command set.
+ */
+
+/**
+ * mipi_dsi_attach - attach a DSI device to its DSI host
+ * @dsi: DSI peripheral
+ */
+int mipi_dsi_attach(struct mipi_dsi_device *dsi)
+{
+	const struct mipi_dsi_host_ops *ops = dsi->host->ops;
+
+	if (!ops || !ops->attach)
+		return -ENOSYS;
+
+	return ops->attach(dsi->host, dsi);
+}
+EXPORT_SYMBOL(mipi_dsi_attach);
+
+/**
+ * mipi_dsi_detach - detach a DSI device from its DSI host
+ * @dsi: DSI peripheral
+ */
+int mipi_dsi_detach(struct mipi_dsi_device *dsi)
+{
+	const struct mipi_dsi_host_ops *ops = dsi->host->ops;
+
+	if (!ops || !ops->detach)
+		return -ENOSYS;
+
+	return ops->detach(dsi->host, dsi);
+}
+EXPORT_SYMBOL(mipi_dsi_detach);
+
+/**
+ * mipi_dsi_device_transfer - transfer message to a DSI device
+ * @dsi: DSI peripheral
+ * @msg: message
+ */
+static ssize_t mipi_dsi_device_transfer(struct mipi_dsi_device *dsi,
+					struct mipi_dsi_msg *msg)
+{
+	const struct mipi_dsi_host_ops *ops = dsi->host->ops;
+
+	if (!ops || !ops->transfer)
+		return -ENOSYS;
+
+	if (dsi->mode_flags & MIPI_DSI_MODE_LPM)
+		msg->flags |= MIPI_DSI_MSG_USE_LPM;
+
+	return ops->transfer(dsi->host, msg);
+}
+
+/**
+ * mipi_dsi_packet_format_is_short - check if a packet is of the short format
+ * @type: MIPI DSI data type of the packet
+ *
+ * Return: true if the packet for the given data type is a short packet, false
+ * otherwise.
+ */
+bool mipi_dsi_packet_format_is_short(u8 type)
+{
+	switch (type) {
+	case MIPI_DSI_V_SYNC_START:
+	case MIPI_DSI_V_SYNC_END:
+	case MIPI_DSI_H_SYNC_START:
+	case MIPI_DSI_H_SYNC_END:
+	case MIPI_DSI_END_OF_TRANSMISSION:
+	case MIPI_DSI_COLOR_MODE_OFF:
+	case MIPI_DSI_COLOR_MODE_ON:
+	case MIPI_DSI_SHUTDOWN_PERIPHERAL:
+	case MIPI_DSI_TURN_ON_PERIPHERAL:
+	case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
+	case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
+	case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
+	case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
+	case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
+	case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
+	case MIPI_DSI_DCS_SHORT_WRITE:
+	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+	case MIPI_DSI_DCS_READ:
+	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
+		return true;
+	}
+
+	return false;
+}
+EXPORT_SYMBOL(mipi_dsi_packet_format_is_short);
+
+/**
+ * mipi_dsi_packet_format_is_long - check if a packet is of the long format
+ * @type: MIPI DSI data type of the packet
+ *
+ * Return: true if the packet for the given data type is a long packet, false
+ * otherwise.
+ */
+bool mipi_dsi_packet_format_is_long(u8 type)
+{
+	switch (type) {
+	case MIPI_DSI_NULL_PACKET:
+	case MIPI_DSI_BLANKING_PACKET:
+	case MIPI_DSI_GENERIC_LONG_WRITE:
+	case MIPI_DSI_DCS_LONG_WRITE:
+	case MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_30:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_36:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_16:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_18:
+	case MIPI_DSI_PIXEL_STREAM_3BYTE_18:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_24:
+		return true;
+	}
+
+	return false;
+}
+EXPORT_SYMBOL(mipi_dsi_packet_format_is_long);
+
+/**
+ * mipi_dsi_create_packet - create a packet from a message according to the
+ *     DSI protocol
+ * @packet: pointer to a DSI packet structure
+ * @msg: message to translate into a packet
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
+			   const struct mipi_dsi_msg *msg)
+{
+	if (!packet || !msg)
+		return -EINVAL;
+
+	/* do some minimum sanity checking */
+	if (!mipi_dsi_packet_format_is_short(msg->type) &&
+	    !mipi_dsi_packet_format_is_long(msg->type))
+		return -EINVAL;
+
+	if (msg->channel > 3)
+		return -EINVAL;
+
+	memset(packet, 0, sizeof(*packet));
+	packet->header[0] = ((msg->channel & 0x3) << 6) | (msg->type & 0x3f);
+
+	/* TODO: compute ECC if hardware support is not available */
+
+	/*
+	 * Long write packets contain the word count in header bytes 1 and 2.
+	 * The payload follows the header and is word count bytes long.
+	 *
+	 * Short write packets encode up to two parameters in header bytes 1
+	 * and 2.
+	 */
+	if (mipi_dsi_packet_format_is_long(msg->type)) {
+		packet->header[1] = (msg->tx_len >> 0) & 0xff;
+		packet->header[2] = (msg->tx_len >> 8) & 0xff;
+
+		packet->payload_length = msg->tx_len;
+		packet->payload = msg->tx_buf;
+	} else {
+		const u8 *tx = msg->tx_buf;
+
+		packet->header[1] = (msg->tx_len > 0) ? tx[0] : 0;
+		packet->header[2] = (msg->tx_len > 1) ? tx[1] : 0;
+	}
+
+	packet->size = sizeof(packet->header) + packet->payload_length;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_create_packet);
+
+/**
+ * mipi_dsi_shutdown_peripheral() - sends a Shutdown Peripheral command
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi)
+{
+	struct mipi_dsi_msg msg = {
+		.channel = dsi->channel,
+		.type = MIPI_DSI_SHUTDOWN_PERIPHERAL,
+		.tx_buf = (u8 [2]) { 0, 0 },
+		.tx_len = 2,
+	};
+	int ret = mipi_dsi_device_transfer(dsi, &msg);
+
+	return (ret < 0) ? ret : 0;
+}
+EXPORT_SYMBOL(mipi_dsi_shutdown_peripheral);
+
+/**
+ * mipi_dsi_turn_on_peripheral() - sends a Turn On Peripheral command
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi)
+{
+	struct mipi_dsi_msg msg = {
+		.channel = dsi->channel,
+		.type = MIPI_DSI_TURN_ON_PERIPHERAL,
+		.tx_buf = (u8 [2]) { 0, 0 },
+		.tx_len = 2,
+	};
+	int ret = mipi_dsi_device_transfer(dsi, &msg);
+
+	return (ret < 0) ? ret : 0;
+}
+EXPORT_SYMBOL(mipi_dsi_turn_on_peripheral);
+
+/*
+ * mipi_dsi_set_maximum_return_packet_size() - specify the maximum size of the
+ *    the payload in a long packet transmitted from the peripheral back to the
+ *    host processor
+ * @dsi: DSI peripheral device
+ * @value: the maximum size of the payload
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
+					    u16 value)
+{
+	u8 tx[2] = { value & 0xff, value >> 8 };
+	struct mipi_dsi_msg msg = {
+		.channel = dsi->channel,
+		.type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE,
+		.tx_len = sizeof(tx),
+		.tx_buf = tx,
+	};
+	int ret = mipi_dsi_device_transfer(dsi, &msg);
+
+	return (ret < 0) ? ret : 0;
+}
+EXPORT_SYMBOL(mipi_dsi_set_maximum_return_packet_size);
+
+/**
+ * mipi_dsi_generic_write() - transmit data using a generic write packet
+ * @dsi: DSI peripheral device
+ * @payload: buffer containing the payload
+ * @size: size of payload buffer
+ *
+ * This function will automatically choose the right data type depending on
+ * the payload length.
+ *
+ * Return: The number of bytes transmitted on success or a negative error code
+ * on failure.
+ */
+ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
+			       size_t size)
+{
+	struct mipi_dsi_msg msg = {
+		.channel = dsi->channel,
+		.tx_buf = payload,
+		.tx_len = size
+	};
+
+	switch (size) {
+	case 0:
+		msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM;
+		break;
+
+	case 1:
+		msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM;
+		break;
+
+	case 2:
+		msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM;
+		break;
+
+	default:
+		msg.type = MIPI_DSI_GENERIC_LONG_WRITE;
+		break;
+	}
+
+	return mipi_dsi_device_transfer(dsi, &msg);
+}
+EXPORT_SYMBOL(mipi_dsi_generic_write);
+
+/**
+ * mipi_dsi_generic_read() - receive data using a generic read packet
+ * @dsi: DSI peripheral device
+ * @params: buffer containing the request parameters
+ * @num_params: number of request parameters
+ * @data: buffer in which to return the received data
+ * @size: size of receive buffer
+ *
+ * This function will automatically choose the right data type depending on
+ * the number of parameters passed in.
+ *
+ * Return: The number of bytes successfully read or a negative error code on
+ * failure.
+ */
+ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
+			      size_t num_params, void *data, size_t size)
+{
+	struct mipi_dsi_msg msg = {
+		.channel = dsi->channel,
+		.tx_len = num_params,
+		.tx_buf = params,
+		.rx_len = size,
+		.rx_buf = data
+	};
+
+	switch (num_params) {
+	case 0:
+		msg.type = MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM;
+		break;
+
+	case 1:
+		msg.type = MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM;
+		break;
+
+	case 2:
+		msg.type = MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return mipi_dsi_device_transfer(dsi, &msg);
+}
+EXPORT_SYMBOL(mipi_dsi_generic_read);
+
+/**
+ * mipi_dsi_dcs_write_buffer() - transmit a DCS command with payload
+ * @dsi: DSI peripheral device
+ * @data: buffer containing data to be transmitted
+ * @len: size of transmission buffer
+ *
+ * This function will automatically choose the right data type depending on
+ * the command payload length.
+ *
+ * Return: The number of bytes successfully transmitted or a negative error
+ * code on failure.
+ */
+ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
+				  const void *data, size_t len)
+{
+	struct mipi_dsi_msg msg = {
+		.channel = dsi->channel,
+		.tx_buf = data,
+		.tx_len = len
+	};
+
+	switch (len) {
+	case 0:
+		return -EINVAL;
+
+	case 1:
+		msg.type = MIPI_DSI_DCS_SHORT_WRITE;
+		break;
+
+	case 2:
+		msg.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM;
+		break;
+
+	default:
+		msg.type = MIPI_DSI_DCS_LONG_WRITE;
+		break;
+	}
+
+	return mipi_dsi_device_transfer(dsi, &msg);
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_write_buffer);
+
+/**
+ * mipi_dsi_dcs_write() - send DCS write command
+ * @dsi: DSI peripheral device
+ * @cmd: DCS command
+ * @data: buffer containing the command payload
+ * @len: command payload length
+ *
+ * This function will automatically choose the right data type depending on
+ * the command payload length.
+ *
+ * Return: The number of bytes successfully transmitted or a negative error
+ * code on failure.
+ */
+ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
+			   const void *data, size_t len)
+{
+	ssize_t err;
+	size_t size;
+	u8 *tx;
+
+	if (len > 0) {
+		size = 1 + len;
+
+		tx = kmalloc(size, GFP_KERNEL);
+		if (!tx)
+			return -ENOMEM;
+
+		/* concatenate the DCS command byte and the payload */
+		tx[0] = cmd;
+		memcpy(&tx[1], data, len);
+	} else {
+		tx = &cmd;
+		size = 1;
+	}
+
+	err = mipi_dsi_dcs_write_buffer(dsi, tx, size);
+
+	if (len > 0)
+		kfree(tx);
+
+	return err;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_write);
+
+/**
+ * mipi_dsi_dcs_read() - send DCS read request command
+ * @dsi: DSI peripheral device
+ * @cmd: DCS command
+ * @data: buffer in which to receive data
+ * @len: size of receive buffer
+ *
+ * Return: The number of bytes read or a negative error code on failure.
+ */
+ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
+			  size_t len)
+{
+	struct mipi_dsi_msg msg = {
+		.channel = dsi->channel,
+		.type = MIPI_DSI_DCS_READ,
+		.tx_buf = &cmd,
+		.tx_len = 1,
+		.rx_buf = data,
+		.rx_len = len
+	};
+
+	return mipi_dsi_device_transfer(dsi, &msg);
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_read);
+
+/**
+ * mipi_dsi_dcs_nop() - send DCS nop packet
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_NOP, NULL, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_nop);
+
+/**
+ * mipi_dsi_dcs_soft_reset() - perform a software reset of the display module
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SOFT_RESET, NULL, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_soft_reset);
+
+/**
+ * mipi_dsi_dcs_get_power_mode() - query the display module's current power
+ *    mode
+ * @dsi: DSI peripheral device
+ * @mode: return location for the current power mode
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_POWER_MODE, mode,
+				sizeof(*mode));
+	if (err <= 0) {
+		if (err == 0)
+			err = -ENODATA;
+
+		return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_get_power_mode);
+
+/**
+ * mipi_dsi_dcs_get_pixel_format() - gets the pixel format for the RGB image
+ *    data used by the interface
+ * @dsi: DSI peripheral device
+ * @format: return location for the pixel format
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_PIXEL_FORMAT, format,
+				sizeof(*format));
+	if (err <= 0) {
+		if (err == 0)
+			err = -ENODATA;
+
+		return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_get_pixel_format);
+
+/**
+ * mipi_dsi_dcs_enter_sleep_mode() - disable all unnecessary blocks inside the
+ *    display module except interface communication
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_enter_sleep_mode);
+
+/**
+ * mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display
+ *    module
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_exit_sleep_mode);
+
+/**
+ * mipi_dsi_dcs_set_display_off() - stop displaying the image data on the
+ *    display device
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_display_off);
+
+/**
+ * mipi_dsi_dcs_set_display_on() - start displaying the image data on the
+ *    display device
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_display_on);
+
+/**
+ * mipi_dsi_dcs_set_column_address() - define the column extent of the frame
+ *    memory accessed by the host processor
+ * @dsi: DSI peripheral device
+ * @start: first column of frame memory
+ * @end: last column of frame memory
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
+				    u16 end)
+{
+	u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff };
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, payload,
+				 sizeof(payload));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_column_address);
+
+/**
+ * mipi_dsi_dcs_set_page_address() - define the page extent of the frame
+ *    memory accessed by the host processor
+ * @dsi: DSI peripheral device
+ * @start: first page of frame memory
+ * @end: last page of frame memory
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
+				  u16 end)
+{
+	u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff };
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PAGE_ADDRESS, payload,
+				 sizeof(payload));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_page_address);
+
+/**
+ * mipi_dsi_dcs_set_tear_off() - turn off the display module's Tearing Effect
+ *    output signal on the TE signal line
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_OFF, NULL, 0);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_off);
+
+/**
+ * mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect
+ *    output signal on the TE signal line.
+ * @dsi: DSI peripheral device
+ * @mode: the Tearing Effect Output Line mode
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
+			     enum mipi_dsi_dcs_tear_mode mode)
+{
+	u8 value = mode;
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_ON, &value,
+				 sizeof(value));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on);
+
+/**
+ * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
+ *    data used by the interface
+ * @dsi: DSI peripheral device
+ * @format: pixel format
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PIXEL_FORMAT, &format,
+				 sizeof(format));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format);
+
+/**
+ * mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for
+ *    the Tearing Effect output signal of the display module
+ * @dsi: DSI peripheral device
+ * @scanline: scanline to use as trigger
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline)
+{
+	u8 payload[3] = { MIPI_DCS_SET_TEAR_SCANLINE, scanline >> 8,
+			  scanline & 0xff };
+	ssize_t err;
+
+	err = mipi_dsi_generic_write(dsi, payload, sizeof(payload));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_scanline);
+
+/**
+ * mipi_dsi_dcs_set_display_brightness() - sets the brightness value of the
+ *    display
+ * @dsi: DSI peripheral device
+ * @brightness: brightness value
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
+					u16 brightness)
+{
+	u8 payload[2] = { brightness & 0xff, brightness >> 8 };
+	ssize_t err;
+
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
+				 payload, sizeof(payload));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_display_brightness);
+
+/**
+ * mipi_dsi_dcs_get_display_brightness() - gets the current brightness value
+ *    of the display
+ * @dsi: DSI peripheral device
+ * @brightness: brightness value
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
+					u16 *brightness)
+{
+	ssize_t err;
+
+	err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
+				brightness, sizeof(*brightness));
+	if (err <= 0) {
+		if (err == 0)
+			err = -ENODATA;
+
+		return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_get_display_brightness);
diff --git a/drivers/video/orisetech_otm8009a.c b/drivers/video/orisetech_otm8009a.c
new file mode 100644
index 0000000000..89d9cfdbb3
--- /dev/null
+++ b/drivers/video/orisetech_otm8009a.c
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
+ * Author(s): Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
+ *            Philippe Cornu <philippe.cornu@st.com> for STMicroelectronics.
+ *
+ * This otm8009a panel driver is inspired from the Linux Kernel driver
+ * drivers/gpu/drm/panel/panel-orisetech-otm8009a.c.
+ */
+#include <common.h>
+#include <backlight.h>
+#include <dm.h>
+#include <mipi_dsi.h>
+#include <panel.h>
+#include <asm/gpio.h>
+#include <power/regulator.h>
+
+#define OTM8009A_BACKLIGHT_DEFAULT	240
+#define OTM8009A_BACKLIGHT_MAX		255
+
+/* Manufacturer Command Set */
+#define MCS_ADRSFT	0x0000	/* Address Shift Function */
+#define MCS_PANSET	0xB3A6	/* Panel Type Setting */
+#define MCS_SD_CTRL	0xC0A2	/* Source Driver Timing Setting */
+#define MCS_P_DRV_M	0xC0B4	/* Panel Driving Mode */
+#define MCS_OSC_ADJ	0xC181	/* Oscillator Adjustment for Idle/Normal mode */
+#define MCS_RGB_VID_SET	0xC1A1	/* RGB Video Mode Setting */
+#define MCS_SD_PCH_CTRL	0xC480	/* Source Driver Precharge Control */
+#define MCS_NO_DOC1	0xC48A	/* Command not documented */
+#define MCS_PWR_CTRL1	0xC580	/* Power Control Setting 1 */
+#define MCS_PWR_CTRL2	0xC590	/* Power Control Setting 2 for Normal Mode */
+#define MCS_PWR_CTRL4	0xC5B0	/* Power Control Setting 4 for DC Voltage */
+#define MCS_PANCTRLSET1	0xCB80	/* Panel Control Setting 1 */
+#define MCS_PANCTRLSET2	0xCB90	/* Panel Control Setting 2 */
+#define MCS_PANCTRLSET3	0xCBA0	/* Panel Control Setting 3 */
+#define MCS_PANCTRLSET4	0xCBB0	/* Panel Control Setting 4 */
+#define MCS_PANCTRLSET5	0xCBC0	/* Panel Control Setting 5 */
+#define MCS_PANCTRLSET6	0xCBD0	/* Panel Control Setting 6 */
+#define MCS_PANCTRLSET7	0xCBE0	/* Panel Control Setting 7 */
+#define MCS_PANCTRLSET8	0xCBF0	/* Panel Control Setting 8 */
+#define MCS_PANU2D1	0xCC80	/* Panel U2D Setting 1 */
+#define MCS_PANU2D2	0xCC90	/* Panel U2D Setting 2 */
+#define MCS_PANU2D3	0xCCA0	/* Panel U2D Setting 3 */
+#define MCS_PAND2U1	0xCCB0	/* Panel D2U Setting 1 */
+#define MCS_PAND2U2	0xCCC0	/* Panel D2U Setting 2 */
+#define MCS_PAND2U3	0xCCD0	/* Panel D2U Setting 3 */
+#define MCS_GOAVST	0xCE80	/* GOA VST Setting */
+#define MCS_GOACLKA1	0xCEA0	/* GOA CLKA1 Setting */
+#define MCS_GOACLKA3	0xCEB0	/* GOA CLKA3 Setting */
+#define MCS_GOAECLK	0xCFC0	/* GOA ECLK Setting */
+#define MCS_NO_DOC2	0xCFD0	/* Command not documented */
+#define MCS_GVDDSET	0xD800	/* GVDD/NGVDD */
+#define MCS_VCOMDC	0xD900	/* VCOM Voltage Setting */
+#define MCS_GMCT2_2P	0xE100	/* Gamma Correction 2.2+ Setting */
+#define MCS_GMCT2_2N	0xE200	/* Gamma Correction 2.2- Setting */
+#define MCS_NO_DOC3	0xF5B6	/* Command not documented */
+#define MCS_CMD2_ENA1	0xFF00	/* Enable Access Command2 "CMD2" */
+#define MCS_CMD2_ENA2	0xFF80	/* Enable Access Orise Command2 */
+
+struct otm8009a_panel_priv {
+	struct udevice *reg;
+	struct gpio_desc reset;
+	unsigned int lanes;
+	enum mipi_dsi_pixel_format format;
+	unsigned long mode_flags;
+};
+
+static const struct display_timing default_timing = {
+	.pixelclock.typ		= 29700000,
+	.hactive.typ		= 480,
+	.hfront_porch.typ	= 98,
+	.hback_porch.typ	= 98,
+	.hsync_len.typ		= 32,
+	.vactive.typ		= 800,
+	.vfront_porch.typ	= 15,
+	.vback_porch.typ	= 14,
+	.vsync_len.typ		= 10,
+};
+
+static void otm8009a_dcs_write_buf(struct udevice *dev, const void *data,
+				   size_t len)
+{
+	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+	struct mipi_dsi_device *device = plat->device;
+
+	if (mipi_dsi_dcs_write_buffer(device, data, len) < 0)
+		dev_err(dev, "mipi dsi dcs write buffer failed\n");
+}
+
+static void otm8009a_dcs_write_buf_hs(struct udevice *dev, const void *data,
+				      size_t len)
+{
+	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+	struct mipi_dsi_device *device = plat->device;
+
+	/* data will be sent in dsi hs mode (ie. no lpm) */
+	device->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	if (mipi_dsi_dcs_write_buffer(device, data, len) < 0)
+		dev_err(dev, "mipi dsi dcs write buffer failed\n");
+
+	/* restore back the dsi lpm mode */
+	device->mode_flags |= MIPI_DSI_MODE_LPM;
+}
+
+#define dcs_write_seq(dev, seq...)				\
+({								\
+	static const u8 d[] = { seq };				\
+	otm8009a_dcs_write_buf(dev, d, ARRAY_SIZE(d));		\
+})
+
+#define dcs_write_seq_hs(dev, seq...)				\
+({								\
+	static const u8 d[] = { seq };				\
+	otm8009a_dcs_write_buf_hs(dev, d, ARRAY_SIZE(d));	\
+})
+
+#define dcs_write_cmd_at(dev, cmd, seq...)		\
+({							\
+	static const u16 c = cmd;			\
+	struct udevice *device = dev;			\
+	dcs_write_seq(device, MCS_ADRSFT, (c) & 0xFF);	\
+	dcs_write_seq(device, (c) >> 8, seq);		\
+})
+
+static int otm8009a_init_sequence(struct udevice *dev)
+{
+	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+	struct mipi_dsi_device *device = plat->device;
+	int ret;
+
+	/* Enter CMD2 */
+	dcs_write_cmd_at(dev, MCS_CMD2_ENA1, 0x80, 0x09, 0x01);
+
+	/* Enter Orise Command2 */
+	dcs_write_cmd_at(dev, MCS_CMD2_ENA2, 0x80, 0x09);
+
+	dcs_write_cmd_at(dev, MCS_SD_PCH_CTRL, 0x30);
+	mdelay(10);
+
+	dcs_write_cmd_at(dev, MCS_NO_DOC1, 0x40);
+	mdelay(10);
+
+	dcs_write_cmd_at(dev, MCS_PWR_CTRL4 + 1, 0xA9);
+	dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 1, 0x34);
+	dcs_write_cmd_at(dev, MCS_P_DRV_M, 0x50);
+	dcs_write_cmd_at(dev, MCS_VCOMDC, 0x4E);
+	dcs_write_cmd_at(dev, MCS_OSC_ADJ, 0x66); /* 65Hz */
+	dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 2, 0x01);
+	dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 5, 0x34);
+	dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 4, 0x33);
+	dcs_write_cmd_at(dev, MCS_GVDDSET, 0x79, 0x79);
+	dcs_write_cmd_at(dev, MCS_SD_CTRL + 1, 0x1B);
+	dcs_write_cmd_at(dev, MCS_PWR_CTRL1 + 2, 0x83);
+	dcs_write_cmd_at(dev, MCS_SD_PCH_CTRL + 1, 0x83);
+	dcs_write_cmd_at(dev, MCS_RGB_VID_SET, 0x0E);
+	dcs_write_cmd_at(dev, MCS_PANSET, 0x00, 0x01);
+
+	dcs_write_cmd_at(dev, MCS_GOAVST, 0x85, 0x01, 0x00, 0x84, 0x01, 0x00);
+	dcs_write_cmd_at(dev, MCS_GOACLKA1, 0x18, 0x04, 0x03, 0x39, 0x00, 0x00,
+			 0x00, 0x18, 0x03, 0x03, 0x3A, 0x00, 0x00, 0x00);
+	dcs_write_cmd_at(dev, MCS_GOACLKA3, 0x18, 0x02, 0x03, 0x3B, 0x00, 0x00,
+			 0x00, 0x18, 0x01, 0x03, 0x3C, 0x00, 0x00, 0x00);
+	dcs_write_cmd_at(dev, MCS_GOAECLK, 0x01, 0x01, 0x20, 0x20, 0x00, 0x00,
+			 0x01, 0x02, 0x00, 0x00);
+
+	dcs_write_cmd_at(dev, MCS_NO_DOC2, 0x00);
+
+	dcs_write_cmd_at(dev, MCS_PANCTRLSET1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	dcs_write_cmd_at(dev, MCS_PANCTRLSET2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			 0, 0, 0, 0, 0);
+	dcs_write_cmd_at(dev, MCS_PANCTRLSET3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			 0, 0, 0, 0, 0);
+	dcs_write_cmd_at(dev, MCS_PANCTRLSET4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	dcs_write_cmd_at(dev, MCS_PANCTRLSET5, 0, 4, 4, 4, 4, 4, 0, 0, 0, 0,
+			 0, 0, 0, 0, 0);
+	dcs_write_cmd_at(dev, MCS_PANCTRLSET6, 0, 0, 0, 0, 0, 0, 4, 4, 4, 4,
+			 4, 0, 0, 0, 0);
+	dcs_write_cmd_at(dev, MCS_PANCTRLSET7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	dcs_write_cmd_at(dev, MCS_PANCTRLSET8, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+			 0xFF, 0xFF, 0xFF, 0xFF, 0xFF);
+
+	dcs_write_cmd_at(dev, MCS_PANU2D1, 0x00, 0x26, 0x09, 0x0B, 0x01, 0x25,
+			 0x00, 0x00, 0x00, 0x00);
+	dcs_write_cmd_at(dev, MCS_PANU2D2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0x00, 0x00, 0x00, 0x00, 0x26, 0x0A, 0x0C, 0x02);
+	dcs_write_cmd_at(dev, MCS_PANU2D3, 0x25, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+	dcs_write_cmd_at(dev, MCS_PAND2U1, 0x00, 0x25, 0x0C, 0x0A, 0x02, 0x26,
+			 0x00, 0x00, 0x00, 0x00);
+	dcs_write_cmd_at(dev, MCS_PAND2U2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0x00, 0x00, 0x00, 0x00, 0x25, 0x0B, 0x09, 0x01);
+	dcs_write_cmd_at(dev, MCS_PAND2U3, 0x26, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+
+	dcs_write_cmd_at(dev, MCS_PWR_CTRL1 + 1, 0x66);
+
+	dcs_write_cmd_at(dev, MCS_NO_DOC3, 0x06);
+
+	dcs_write_cmd_at(dev, MCS_GMCT2_2P, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10,
+			 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A,
+			 0x01);
+	dcs_write_cmd_at(dev, MCS_GMCT2_2N, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10,
+			 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A,
+			 0x01);
+
+	/* Exit CMD2 */
+	dcs_write_cmd_at(dev, MCS_CMD2_ENA1, 0xFF, 0xFF, 0xFF);
+
+	ret =  mipi_dsi_dcs_nop(device);
+	if (ret)
+		return ret;
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(device);
+	if (ret)
+		return ret;
+
+	/* Wait for sleep out exit */
+	mdelay(120);
+
+	/* Default portrait 480x800 rgb24 */
+	dcs_write_seq(dev, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
+
+	ret =  mipi_dsi_dcs_set_column_address(device, 0,
+					       default_timing.hactive.typ - 1);
+	if (ret)
+		return ret;
+
+	ret =  mipi_dsi_dcs_set_page_address(device, 0,
+					     default_timing.vactive.typ - 1);
+	if (ret)
+		return ret;
+
+	/* See otm8009a driver documentation for pixel format descriptions */
+	ret =  mipi_dsi_dcs_set_pixel_format(device, MIPI_DCS_PIXEL_FMT_24BIT |
+					     MIPI_DCS_PIXEL_FMT_24BIT << 4);
+	if (ret)
+		return ret;
+
+	/* Disable CABC feature */
+	dcs_write_seq(dev, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
+
+	ret = mipi_dsi_dcs_set_display_on(device);
+	if (ret)
+		return ret;
+
+	ret = mipi_dsi_dcs_nop(device);
+	if (ret)
+		return ret;
+
+	/* Send Command GRAM memory write (no parameters) */
+	dcs_write_seq(dev, MIPI_DCS_WRITE_MEMORY_START);
+
+	return 0;
+}
+
+static int otm8009a_panel_enable_backlight(struct udevice *dev)
+{
+	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+	struct mipi_dsi_device *device = plat->device;
+	int ret;
+
+	ret = mipi_dsi_attach(device);
+	if (ret < 0)
+		return ret;
+
+	ret = otm8009a_init_sequence(dev);
+	if (ret)
+		return ret;
+
+	/*
+	 * Power on the backlight with the requested brightness
+	 * Note We can not use mipi_dsi_dcs_set_display_brightness()
+	 * as otm8009a driver support only 8-bit brightness (1 param).
+	 */
+	dcs_write_seq(dev, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
+		      OTM8009A_BACKLIGHT_DEFAULT);
+
+	/* Update Brightness Control & Backlight */
+	dcs_write_seq(dev, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24);
+
+	/* Update Brightness Control & Backlight */
+	dcs_write_seq_hs(dev, MIPI_DCS_WRITE_CONTROL_DISPLAY);
+
+	/* Need to wait a few time before sending the first image */
+	mdelay(10);
+
+	return 0;
+}
+
+static int otm8009a_panel_get_display_timing(struct udevice *dev,
+					     struct display_timing *timings)
+{
+	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+	struct mipi_dsi_device *device = plat->device;
+	struct otm8009a_panel_priv *priv = dev_get_priv(dev);
+
+	memcpy(timings, &default_timing, sizeof(*timings));
+
+	/* fill characteristics of DSI data link */
+	device->lanes = priv->lanes;
+	device->format = priv->format;
+	device->mode_flags = priv->mode_flags;
+
+	return 0;
+}
+
+static int otm8009a_panel_ofdata_to_platdata(struct udevice *dev)
+{
+	struct otm8009a_panel_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	if (IS_ENABLED(CONFIG_DM_REGULATOR)) {
+		ret =  device_get_supply_regulator(dev, "power-supply",
+						   &priv->reg);
+		if (ret && ret != -ENOENT) {
+			dev_err(dev, "Warning: cannot get power supply\n");
+			return ret;
+		}
+	}
+
+	ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset,
+				   GPIOD_IS_OUT);
+	if (ret) {
+		dev_err(dev, "warning: cannot get reset GPIO\n");
+		if (ret != -ENOENT)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int otm8009a_panel_probe(struct udevice *dev)
+{
+	struct otm8009a_panel_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) {
+		dev_dbg(dev, "enable regulator '%s'\n", priv->reg->name);
+		ret = regulator_set_enable(priv->reg, true);
+		if (ret)
+			return ret;
+	}
+
+	/* reset panel */
+	dm_gpio_set_value(&priv->reset, true);
+	mdelay(1); /* >50us */
+	dm_gpio_set_value(&priv->reset, false);
+	mdelay(10); /* >5ms */
+
+	priv->lanes = 2;
+	priv->format = MIPI_DSI_FMT_RGB888;
+	priv->mode_flags = MIPI_DSI_MODE_VIDEO |
+			   MIPI_DSI_MODE_VIDEO_BURST |
+			   MIPI_DSI_MODE_LPM;
+
+	return 0;
+}
+
+static const struct panel_ops otm8009a_panel_ops = {
+	.enable_backlight = otm8009a_panel_enable_backlight,
+	.get_display_timing = otm8009a_panel_get_display_timing,
+};
+
+static const struct udevice_id otm8009a_panel_ids[] = {
+	{ .compatible = "orisetech,otm8009a" },
+	{ }
+};
+
+U_BOOT_DRIVER(otm8009a_panel) = {
+	.name			  = "otm8009a_panel",
+	.id			  = UCLASS_PANEL,
+	.of_match		  = otm8009a_panel_ids,
+	.ops			  = &otm8009a_panel_ops,
+	.ofdata_to_platdata	  = otm8009a_panel_ofdata_to_platdata,
+	.probe			  = otm8009a_panel_probe,
+	.platdata_auto_alloc_size = sizeof(struct mipi_dsi_panel_plat),
+	.priv_auto_alloc_size	= sizeof(struct otm8009a_panel_priv),
+};
diff --git a/drivers/video/raydium-rm68200.c b/drivers/video/raydium-rm68200.c
new file mode 100644
index 0000000000..91555e26ed
--- /dev/null
+++ b/drivers/video/raydium-rm68200.c
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
+ * Author(s): Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
+ *            Philippe Cornu <philippe.cornu@st.com> for STMicroelectronics.
+ *
+ * This rm68200 panel driver is inspired from the Linux Kernel driver
+ * drivers/gpu/drm/panel/panel-raydium-rm68200.c.
+ */
+#include <common.h>
+#include <backlight.h>
+#include <dm.h>
+#include <mipi_dsi.h>
+#include <panel.h>
+#include <asm/gpio.h>
+#include <power/regulator.h>
+
+/*** Manufacturer Command Set ***/
+#define MCS_CMD_MODE_SW	0xFE /* CMD Mode Switch */
+#define MCS_CMD1_UCS	0x00 /* User Command Set (UCS = CMD1) */
+#define MCS_CMD2_P0	0x01 /* Manufacture Command Set Page0 (CMD2 P0) */
+#define MCS_CMD2_P1	0x02 /* Manufacture Command Set Page1 (CMD2 P1) */
+#define MCS_CMD2_P2	0x03 /* Manufacture Command Set Page2 (CMD2 P2) */
+#define MCS_CMD2_P3	0x04 /* Manufacture Command Set Page3 (CMD2 P3) */
+
+/* CMD2 P0 commands (Display Options and Power) */
+#define MCS_STBCTR	0x12 /* TE1 Output Setting Zig-Zag Connection */
+#define MCS_SGOPCTR	0x16 /* Source Bias Current */
+#define MCS_SDCTR	0x1A /* Source Output Delay Time */
+#define MCS_INVCTR	0x1B /* Inversion Type */
+#define MCS_EXT_PWR_IC	0x24 /* External PWR IC Control */
+#define MCS_SETAVDD	0x27 /* PFM Control for AVDD Output */
+#define MCS_SETAVEE	0x29 /* PFM Control for AVEE Output */
+#define MCS_BT2CTR	0x2B /* DDVDL Charge Pump Control */
+#define MCS_BT3CTR	0x2F /* VGH Charge Pump Control */
+#define MCS_BT4CTR	0x34 /* VGL Charge Pump Control */
+#define MCS_VCMCTR	0x46 /* VCOM Output Level Control */
+#define MCS_SETVGN	0x52 /* VG M/S N Control */
+#define MCS_SETVGP	0x54 /* VG M/S P Control */
+#define MCS_SW_CTRL	0x5F /* Interface Control for PFM and MIPI */
+
+/* CMD2 P2 commands (GOA Timing Control) - no description in datasheet */
+#define GOA_VSTV1		0x00
+#define GOA_VSTV2		0x07
+#define GOA_VCLK1		0x0E
+#define GOA_VCLK2		0x17
+#define GOA_VCLK_OPT1		0x20
+#define GOA_BICLK1		0x2A
+#define GOA_BICLK2		0x37
+#define GOA_BICLK3		0x44
+#define GOA_BICLK4		0x4F
+#define GOA_BICLK_OPT1		0x5B
+#define GOA_BICLK_OPT2		0x60
+#define MCS_GOA_GPO1		0x6D
+#define MCS_GOA_GPO2		0x71
+#define MCS_GOA_EQ		0x74
+#define MCS_GOA_CLK_GALLON	0x7C
+#define MCS_GOA_FS_SEL0		0x7E
+#define MCS_GOA_FS_SEL1		0x87
+#define MCS_GOA_FS_SEL2		0x91
+#define MCS_GOA_FS_SEL3		0x9B
+#define MCS_GOA_BS_SEL0		0xAC
+#define MCS_GOA_BS_SEL1		0xB5
+#define MCS_GOA_BS_SEL2		0xBF
+#define MCS_GOA_BS_SEL3		0xC9
+#define MCS_GOA_BS_SEL4		0xD3
+
+/* CMD2 P3 commands (Gamma) */
+#define MCS_GAMMA_VP		0x60 /* Gamma VP1~VP16 */
+#define MCS_GAMMA_VN		0x70 /* Gamma VN1~VN16 */
+
+struct rm68200_panel_priv {
+	struct udevice *reg;
+	struct udevice *backlight;
+	struct gpio_desc reset;
+	unsigned int lanes;
+	enum mipi_dsi_pixel_format format;
+	unsigned long mode_flags;
+};
+
+static const struct display_timing default_timing = {
+	.pixelclock.typ		= 54000000,
+	.hactive.typ		= 720,
+	.hfront_porch.typ	= 48,
+	.hback_porch.typ	= 48,
+	.hsync_len.typ		= 9,
+	.vactive.typ		= 1280,
+	.vfront_porch.typ	= 12,
+	.vback_porch.typ	= 12,
+	.vsync_len.typ		= 5,
+};
+
+static void rm68200_dcs_write_buf(struct udevice *dev, const void *data,
+				  size_t len)
+{
+	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+	struct mipi_dsi_device *device = plat->device;
+	int err;
+
+	err = mipi_dsi_dcs_write_buffer(device, data, len);
+	if (err < 0)
+		dev_err(dev, "MIPI DSI DCS write buffer failed: %d\n", err);
+}
+
+static void rm68200_dcs_write_cmd(struct udevice *dev, u8 cmd, u8 value)
+{
+	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+	struct mipi_dsi_device *device = plat->device;
+	int err;
+
+	err = mipi_dsi_dcs_write(device, cmd, &value, 1);
+	if (err < 0)
+		dev_err(dev, "MIPI DSI DCS write failed: %d\n", err);
+}
+
+#define dcs_write_seq(ctx, seq...)				\
+({								\
+	static const u8 d[] = { seq };				\
+								\
+	rm68200_dcs_write_buf(ctx, d, ARRAY_SIZE(d));		\
+})
+
+/*
+ * This panel is not able to auto-increment all cmd addresses so for some of
+ * them, we need to send them one by one...
+ */
+#define dcs_write_cmd_seq(ctx, cmd, seq...)			\
+({								\
+	static const u8 d[] = { seq };				\
+	unsigned int i;						\
+								\
+	for (i = 0; i < ARRAY_SIZE(d) ; i++)			\
+		rm68200_dcs_write_cmd(ctx, cmd + i, d[i]);	\
+})
+
+static void rm68200_init_sequence(struct udevice *dev)
+{
+	/* Enter CMD2 with page 0 */
+	dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P0);
+	dcs_write_cmd_seq(dev, MCS_EXT_PWR_IC, 0xC0, 0x53, 0x00);
+	dcs_write_seq(dev, MCS_BT2CTR, 0xE5);
+	dcs_write_seq(dev, MCS_SETAVDD, 0x0A);
+	dcs_write_seq(dev, MCS_SETAVEE, 0x0A);
+	dcs_write_seq(dev, MCS_SGOPCTR, 0x52);
+	dcs_write_seq(dev, MCS_BT3CTR, 0x53);
+	dcs_write_seq(dev, MCS_BT4CTR, 0x5A);
+	dcs_write_seq(dev, MCS_INVCTR, 0x00);
+	dcs_write_seq(dev, MCS_STBCTR, 0x0A);
+	dcs_write_seq(dev, MCS_SDCTR, 0x06);
+	dcs_write_seq(dev, MCS_VCMCTR, 0x56);
+	dcs_write_seq(dev, MCS_SETVGN, 0xA0, 0x00);
+	dcs_write_seq(dev, MCS_SETVGP, 0xA0, 0x00);
+	dcs_write_seq(dev, MCS_SW_CTRL, 0x11); /* 2 data lanes, see doc */
+
+	dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P2);
+	dcs_write_seq(dev, GOA_VSTV1, 0x05);
+	dcs_write_seq(dev, 0x02, 0x0B);
+	dcs_write_seq(dev, 0x03, 0x0F);
+	dcs_write_seq(dev, 0x04, 0x7D, 0x00, 0x50);
+	dcs_write_cmd_seq(dev, GOA_VSTV2, 0x05, 0x16, 0x0D, 0x11, 0x7D, 0x00,
+			  0x50);
+	dcs_write_cmd_seq(dev, GOA_VCLK1, 0x07, 0x08, 0x01, 0x02, 0x00, 0x7D,
+			  0x00, 0x85, 0x08);
+	dcs_write_cmd_seq(dev, GOA_VCLK2, 0x03, 0x04, 0x05, 0x06, 0x00, 0x7D,
+			  0x00, 0x85, 0x08);
+	dcs_write_seq(dev, GOA_VCLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		      0x00, 0x00, 0x00, 0x00);
+	dcs_write_cmd_seq(dev, GOA_BICLK1, 0x07, 0x08);
+	dcs_write_seq(dev, 0x2D, 0x01);
+	dcs_write_seq(dev, 0x2F, 0x02, 0x00, 0x40, 0x05, 0x08, 0x54, 0x7D,
+		      0x00);
+	dcs_write_cmd_seq(dev, GOA_BICLK2, 0x03, 0x04, 0x05, 0x06, 0x00);
+	dcs_write_seq(dev, 0x3D, 0x40);
+	dcs_write_seq(dev, 0x3F, 0x05, 0x08, 0x54, 0x7D, 0x00);
+	dcs_write_seq(dev, GOA_BICLK3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		      0x00, 0x00, 0x00, 0x00, 0x00);
+	dcs_write_seq(dev, GOA_BICLK4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		      0x00, 0x00);
+	dcs_write_seq(dev, 0x58, 0x00, 0x00, 0x00);
+	dcs_write_seq(dev, GOA_BICLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00);
+	dcs_write_seq(dev, GOA_BICLK_OPT2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+	dcs_write_seq(dev, MCS_GOA_GPO1, 0x00, 0x00, 0x00, 0x00);
+	dcs_write_seq(dev, MCS_GOA_GPO2, 0x00, 0x20, 0x00);
+	dcs_write_seq(dev, MCS_GOA_EQ, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
+		      0x00, 0x00);
+	dcs_write_seq(dev, MCS_GOA_CLK_GALLON, 0x00, 0x00);
+	dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL0, 0xBF, 0x02, 0x06, 0x14, 0x10,
+			  0x16, 0x12, 0x08, 0x3F);
+	dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0C,
+			  0x0A, 0x0E, 0x3F, 0x3F, 0x00);
+	dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL2, 0x04, 0x3F, 0x3F, 0x3F, 0x3F,
+			  0x05, 0x01, 0x3F, 0x3F, 0x0F);
+	dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL3, 0x0B, 0x0D, 0x3F, 0x3F, 0x3F,
+			  0x3F);
+	dcs_write_cmd_seq(dev, 0xA2, 0x3F, 0x09, 0x13, 0x17, 0x11, 0x15);
+	dcs_write_cmd_seq(dev, 0xA9, 0x07, 0x03, 0x3F);
+	dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL0, 0x3F, 0x05, 0x01, 0x17, 0x13,
+			  0x15, 0x11, 0x0F, 0x3F);
+	dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0B,
+			  0x0D, 0x09, 0x3F, 0x3F, 0x07);
+	dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL2, 0x03, 0x3F, 0x3F, 0x3F, 0x3F,
+			  0x02, 0x06, 0x3F, 0x3F, 0x08);
+	dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL3, 0x0C, 0x0A, 0x3F, 0x3F, 0x3F,
+			  0x3F, 0x3F, 0x0E, 0x10, 0x14);
+	dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL4, 0x12, 0x16, 0x00, 0x04, 0x3F);
+	dcs_write_seq(dev, 0xDC, 0x02);
+	dcs_write_seq(dev, 0xDE, 0x12);
+
+	dcs_write_seq(dev, MCS_CMD_MODE_SW, 0x0E); /* No documentation */
+	dcs_write_seq(dev, 0x01, 0x75);
+
+	dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P3);
+	dcs_write_cmd_seq(dev, MCS_GAMMA_VP, 0x00, 0x0C, 0x12, 0x0E, 0x06,
+			  0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
+			  0x12, 0x0C, 0x00);
+	dcs_write_cmd_seq(dev, MCS_GAMMA_VN, 0x00, 0x0C, 0x12, 0x0E, 0x06,
+			  0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
+			  0x12, 0x0C, 0x00);
+
+	/* Exit CMD2 */
+	dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD1_UCS);
+}
+
+static int rm68200_panel_enable_backlight(struct udevice *dev)
+{
+	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+	struct mipi_dsi_device *device = plat->device;
+	struct rm68200_panel_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	ret = mipi_dsi_attach(device);
+	if (ret < 0)
+		return ret;
+
+	rm68200_init_sequence(dev);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(device);
+	if (ret)
+		return ret;
+
+	mdelay(125);
+
+	ret = mipi_dsi_dcs_set_display_on(device);
+	if (ret)
+		return ret;
+
+	mdelay(20);
+
+	ret = backlight_enable(priv->backlight);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int rm68200_panel_get_display_timing(struct udevice *dev,
+					    struct display_timing *timings)
+{
+	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+	struct mipi_dsi_device *device = plat->device;
+	struct rm68200_panel_priv *priv = dev_get_priv(dev);
+
+	memcpy(timings, &default_timing, sizeof(*timings));
+
+	/* fill characteristics of DSI data link */
+	device->lanes = priv->lanes;
+	device->format = priv->format;
+	device->mode_flags = priv->mode_flags;
+
+	return 0;
+}
+
+static int rm68200_panel_ofdata_to_platdata(struct udevice *dev)
+{
+	struct rm68200_panel_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	if (IS_ENABLED(CONFIG_DM_REGULATOR)) {
+		ret =  device_get_supply_regulator(dev, "power-supply",
+						   &priv->reg);
+		if (ret && ret != -ENOENT) {
+			dev_err(dev, "Warning: cannot get power supply\n");
+			return ret;
+		}
+	}
+
+	ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset,
+				   GPIOD_IS_OUT);
+	if (ret) {
+		dev_err(dev, "Warning: cannot get reset GPIO\n");
+		if (ret != -ENOENT)
+			return ret;
+	}
+
+	ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
+					   "backlight", &priv->backlight);
+	if (ret) {
+		dev_err(dev, "Cannot get backlight: ret=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rm68200_panel_probe(struct udevice *dev)
+{
+	struct rm68200_panel_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) {
+		ret = regulator_set_enable(priv->reg, true);
+		if (ret)
+			return ret;
+	}
+
+	/* reset panel */
+	dm_gpio_set_value(&priv->reset, true);
+	mdelay(1);
+	dm_gpio_set_value(&priv->reset, false);
+	mdelay(10);
+
+	priv->lanes = 2;
+	priv->format = MIPI_DSI_FMT_RGB888;
+	priv->mode_flags = MIPI_DSI_MODE_VIDEO |
+			   MIPI_DSI_MODE_VIDEO_BURST |
+			   MIPI_DSI_MODE_LPM;
+
+	return 0;
+}
+
+static const struct panel_ops rm68200_panel_ops = {
+	.enable_backlight = rm68200_panel_enable_backlight,
+	.get_display_timing = rm68200_panel_get_display_timing,
+};
+
+static const struct udevice_id rm68200_panel_ids[] = {
+	{ .compatible = "raydium,rm68200" },
+	{ }
+};
+
+U_BOOT_DRIVER(rm68200_panel) = {
+	.name			  = "rm68200_panel",
+	.id			  = UCLASS_PANEL,
+	.of_match		  = rm68200_panel_ids,
+	.ops			  = &rm68200_panel_ops,
+	.ofdata_to_platdata	  = rm68200_panel_ofdata_to_platdata,
+	.probe			  = rm68200_panel_probe,
+	.platdata_auto_alloc_size = sizeof(struct mipi_dsi_panel_plat),
+	.priv_auto_alloc_size	= sizeof(struct rm68200_panel_priv),
+};
diff --git a/drivers/video/sandbox_dsi_host.c b/drivers/video/sandbox_dsi_host.c
new file mode 100644
index 0000000000..cd644ec0b4
--- /dev/null
+++ b/drivers/video/sandbox_dsi_host.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <display.h>
+#include <dm.h>
+#include <dsi_host.h>
+
+/**
+ * struct sandbox_dsi_host_priv - private data for driver
+ * @device: DSI peripheral device
+ * @timing: Display timings
+ * @max_data_lanes: maximum number of data lines
+ * @phy_ops: set of function pointers for performing physical operations
+ */
+struct sandbox_dsi_host_priv {
+	struct mipi_dsi_device *device;
+	struct display_timing *timings;
+	unsigned int max_data_lanes;
+	const struct mipi_dsi_phy_ops *phy_ops;
+};
+
+static int sandbox_dsi_host_init(struct udevice *dev,
+				 struct mipi_dsi_device *device,
+				 struct display_timing *timings,
+				 unsigned int max_data_lanes,
+				 const struct mipi_dsi_phy_ops *phy_ops)
+{
+	struct sandbox_dsi_host_priv *priv = dev_get_priv(dev);
+
+	if (!device)
+		return -1;
+
+	if (!timings)
+		return -2;
+
+	if (max_data_lanes == 0)
+		return -3;
+
+	if (!phy_ops)
+		return -4;
+
+	if (!phy_ops->init || !phy_ops->get_lane_mbps ||
+	    !phy_ops->post_set_mode)
+		return -5;
+
+	priv->max_data_lanes = max_data_lanes;
+	priv->phy_ops = phy_ops;
+	priv->timings = timings;
+	priv->device = device;
+
+	return 0;
+}
+
+static int sandbox_dsi_host_enable(struct udevice *dev)
+{
+	struct sandbox_dsi_host_priv *priv = dev_get_priv(dev);
+	unsigned int lane_mbps;
+	int ret;
+
+	priv->phy_ops->init(priv->device);
+	ret = priv->phy_ops->get_lane_mbps(priv->device, priv->timings, 2,
+					   MIPI_DSI_FMT_RGB888, &lane_mbps);
+	if (ret)
+		return -1;
+
+	priv->phy_ops->post_set_mode(priv->device, MIPI_DSI_MODE_VIDEO);
+
+	return 0;
+}
+
+struct dsi_host_ops sandbox_dsi_host_ops = {
+	.init = sandbox_dsi_host_init,
+	.enable = sandbox_dsi_host_enable,
+};
+
+static const struct udevice_id sandbox_dsi_host_ids[] = {
+	{ .compatible = "sandbox,dsi-host"},
+	{ }
+};
+
+U_BOOT_DRIVER(sandbox_dsi_host) = {
+	.name		      = "sandbox-dsi-host",
+	.id		      = UCLASS_DSI_HOST,
+	.of_match	      = sandbox_dsi_host_ids,
+	.ops		      = &sandbox_dsi_host_ops,
+	.priv_auto_alloc_size = sizeof(struct sandbox_dsi_host_priv),
+};
diff --git a/drivers/video/stm32/Kconfig b/drivers/video/stm32/Kconfig
index 78b1facad4..95d51bb4e9 100644
--- a/drivers/video/stm32/Kconfig
+++ b/drivers/video/stm32/Kconfig
@@ -13,6 +13,15 @@ menuconfig VIDEO_STM32
 	  DSI. This option enables these supports which can be used on
 	  devices which have RGB TFT or DSI display connected.
 
+config VIDEO_STM32_DSI
+	bool "Enable STM32 DSI video support"
+	depends on VIDEO_STM32
+	select VIDEO_BRIDGE
+	select VIDEO_DW_MIPI_DSI
+	help
+	  This option enables support DSI internal bridge which can be used on
+	  devices which have DSI devices connected.
+
 config VIDEO_STM32_MAX_XRES
 	int "Maximum horizontal resolution (for memory allocation purposes)"
 	depends on VIDEO_STM32
diff --git a/drivers/video/stm32/Makefile b/drivers/video/stm32/Makefile
index 7297e5f57a..f8b42d1a4d 100644
--- a/drivers/video/stm32/Makefile
+++ b/drivers/video/stm32/Makefile
@@ -6,3 +6,4 @@
 #          Yannick Fertre <yannick.fertre@st.com>
 
 obj-${CONFIG_VIDEO_STM32} = stm32_ltdc.o
+obj-${CONFIG_VIDEO_STM32_DSI} += stm32_dsi.o
diff --git a/drivers/video/stm32/stm32_dsi.c b/drivers/video/stm32/stm32_dsi.c
new file mode 100644
index 0000000000..cb89576e1d
--- /dev/null
+++ b/drivers/video/stm32/stm32_dsi.c
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
+ * Author(s): Philippe Cornu <philippe.cornu@st.com> for STMicroelectronics.
+ *	      Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
+ *
+ * This MIPI DSI controller driver is based on the Linux Kernel driver from
+ * drivers/gpu/drm/stm/dw_mipi_dsi-stm.c.
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <dsi_host.h>
+#include <mipi_dsi.h>
+#include <panel.h>
+#include <reset.h>
+#include <video.h>
+#include <video_bridge.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+#include <dm/device-internal.h>
+#include <linux/iopoll.h>
+#include <power/regulator.h>
+
+#define HWVER_130			0x31333000	/* IP version 1.30 */
+#define HWVER_131			0x31333100	/* IP version 1.31 */
+
+/* DSI digital registers & bit definitions */
+#define DSI_VERSION			0x00
+#define VERSION				GENMASK(31, 8)
+
+/*
+ * DSI wrapper registers & bit definitions
+ * Note: registers are named as in the Reference Manual
+ */
+#define DSI_WCFGR	0x0400		/* Wrapper ConFiGuration Reg */
+#define WCFGR_DSIM	BIT(0)		/* DSI Mode */
+#define WCFGR_COLMUX	GENMASK(3, 1)	/* COLor MUltipleXing */
+
+#define DSI_WCR		0x0404		/* Wrapper Control Reg */
+#define WCR_DSIEN	BIT(3)		/* DSI ENable */
+
+#define DSI_WISR	0x040C		/* Wrapper Interrupt and Status Reg */
+#define WISR_PLLLS	BIT(8)		/* PLL Lock Status */
+#define WISR_RRS	BIT(12)		/* Regulator Ready Status */
+
+#define DSI_WPCR0	0x0418		/* Wrapper Phy Conf Reg 0 */
+#define WPCR0_UIX4	GENMASK(5, 0)	/* Unit Interval X 4 */
+#define WPCR0_TDDL	BIT(16)		/* Turn Disable Data Lanes */
+
+#define DSI_WRPCR	0x0430		/* Wrapper Regulator & Pll Ctrl Reg */
+#define WRPCR_PLLEN	BIT(0)		/* PLL ENable */
+#define WRPCR_NDIV	GENMASK(8, 2)	/* pll loop DIVision Factor */
+#define WRPCR_IDF	GENMASK(14, 11)	/* pll Input Division Factor */
+#define WRPCR_ODF	GENMASK(17, 16)	/* pll Output Division Factor */
+#define WRPCR_REGEN	BIT(24)		/* REGulator ENable */
+#define WRPCR_BGREN	BIT(28)		/* BandGap Reference ENable */
+#define IDF_MIN		1
+#define IDF_MAX		7
+#define NDIV_MIN	10
+#define NDIV_MAX	125
+#define ODF_MIN		1
+#define ODF_MAX		8
+
+/* dsi color format coding according to the datasheet */
+enum dsi_color {
+	DSI_RGB565_CONF1,
+	DSI_RGB565_CONF2,
+	DSI_RGB565_CONF3,
+	DSI_RGB666_CONF1,
+	DSI_RGB666_CONF2,
+	DSI_RGB888,
+};
+
+#define LANE_MIN_KBPS	31250
+#define LANE_MAX_KBPS	500000
+
+/* Timeout for regulator on/off, pll lock/unlock & fifo empty */
+#define TIMEOUT_US	200000
+
+struct stm32_dsi_priv {
+	struct mipi_dsi_device device;
+	void __iomem *base;
+	struct udevice *panel;
+	u32 pllref_clk;
+	u32 hw_version;
+	int lane_min_kbps;
+	int lane_max_kbps;
+	struct udevice *vdd_reg;
+	struct udevice *dsi_host;
+};
+
+static inline void dsi_write(struct stm32_dsi_priv *dsi, u32 reg, u32 val)
+{
+	writel(val, dsi->base + reg);
+}
+
+static inline u32 dsi_read(struct stm32_dsi_priv *dsi, u32 reg)
+{
+	return readl(dsi->base + reg);
+}
+
+static inline void dsi_set(struct stm32_dsi_priv *dsi, u32 reg, u32 mask)
+{
+	dsi_write(dsi, reg, dsi_read(dsi, reg) | mask);
+}
+
+static inline void dsi_clear(struct stm32_dsi_priv *dsi, u32 reg, u32 mask)
+{
+	dsi_write(dsi, reg, dsi_read(dsi, reg) & ~mask);
+}
+
+static inline void dsi_update_bits(struct stm32_dsi_priv *dsi, u32 reg,
+				   u32 mask, u32 val)
+{
+	dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
+}
+
+static enum dsi_color dsi_color_from_mipi(u32 fmt)
+{
+	switch (fmt) {
+	case MIPI_DSI_FMT_RGB888:
+		return DSI_RGB888;
+	case MIPI_DSI_FMT_RGB666:
+		return DSI_RGB666_CONF2;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		return DSI_RGB666_CONF1;
+	case MIPI_DSI_FMT_RGB565:
+		return DSI_RGB565_CONF1;
+	default:
+		pr_err("MIPI color invalid, so we use rgb888\n");
+	}
+	return DSI_RGB888;
+}
+
+static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
+{
+	int divisor = idf * odf;
+
+	/* prevent from division by 0 */
+	if (!divisor)
+		return 0;
+
+	return DIV_ROUND_CLOSEST(clkin_khz * ndiv, divisor);
+}
+
+static int dsi_pll_get_params(struct stm32_dsi_priv *dsi,
+			      int clkin_khz, int clkout_khz,
+			      int *idf, int *ndiv, int *odf)
+{
+	int i, o, n, n_min, n_max;
+	int fvco_min, fvco_max, delta, best_delta; /* all in khz */
+
+	/* Early checks preventing division by 0 & odd results */
+	if (clkin_khz <= 0 || clkout_khz <= 0)
+		return -EINVAL;
+
+	fvco_min = dsi->lane_min_kbps * 2 * ODF_MAX;
+	fvco_max = dsi->lane_max_kbps * 2 * ODF_MIN;
+
+	best_delta = 1000000; /* big started value (1000000khz) */
+
+	for (i = IDF_MIN; i <= IDF_MAX; i++) {
+		/* Compute ndiv range according to Fvco */
+		n_min = ((fvco_min * i) / (2 * clkin_khz)) + 1;
+		n_max = (fvco_max * i) / (2 * clkin_khz);
+
+		/* No need to continue idf loop if we reach ndiv max */
+		if (n_min >= NDIV_MAX)
+			break;
+
+		/* Clamp ndiv to valid values */
+		if (n_min < NDIV_MIN)
+			n_min = NDIV_MIN;
+		if (n_max > NDIV_MAX)
+			n_max = NDIV_MAX;
+
+		for (o = ODF_MIN; o <= ODF_MAX; o *= 2) {
+			n = DIV_ROUND_CLOSEST(i * o * clkout_khz, clkin_khz);
+			/* Check ndiv according to vco range */
+			if (n < n_min || n > n_max)
+				continue;
+			/* Check if new delta is better & saves parameters */
+			delta = dsi_pll_get_clkout_khz(clkin_khz, i, n, o) -
+				clkout_khz;
+			if (delta < 0)
+				delta = -delta;
+			if (delta < best_delta) {
+				*idf = i;
+				*ndiv = n;
+				*odf = o;
+				best_delta = delta;
+			}
+			/* fast return in case of "perfect result" */
+			if (!delta)
+				return 0;
+		}
+	}
+
+	return 0;
+}
+
+static int dsi_phy_init(void *priv_data)
+{
+	struct mipi_dsi_device *device = priv_data;
+	struct udevice *dev = device->dev;
+	struct stm32_dsi_priv *dsi = dev_get_priv(dev);
+	u32 val;
+	int ret;
+
+	debug("Initialize DSI physical layer\n");
+
+	/* Enable the regulator */
+	dsi_set(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN);
+	ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
+				 TIMEOUT_US);
+	if (ret) {
+		debug("!TIMEOUT! waiting REGU\n");
+		return ret;
+	}
+
+	/* Enable the DSI PLL & wait for its lock */
+	dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN);
+	ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
+				 TIMEOUT_US);
+	if (ret) {
+		debug("!TIMEOUT! waiting PLL\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void dsi_phy_post_set_mode(void *priv_data, unsigned long mode_flags)
+{
+	struct mipi_dsi_device *device = priv_data;
+	struct udevice *dev = device->dev;
+	struct stm32_dsi_priv *dsi = dev_get_priv(dev);
+
+	debug("Set mode %p enable %ld\n", dsi,
+	      mode_flags & MIPI_DSI_MODE_VIDEO);
+
+	if (!dsi)
+		return;
+
+	/*
+	 * DSI wrapper must be enabled in video mode & disabled in command mode.
+	 * If wrapper is enabled in command mode, the display controller
+	 * register access will hang.
+	 */
+
+	if (mode_flags & MIPI_DSI_MODE_VIDEO)
+		dsi_set(dsi, DSI_WCR, WCR_DSIEN);
+	else
+		dsi_clear(dsi, DSI_WCR, WCR_DSIEN);
+}
+
+static int dsi_get_lane_mbps(void *priv_data, struct display_timing *timings,
+			     u32 lanes, u32 format, unsigned int *lane_mbps)
+{
+	struct mipi_dsi_device *device = priv_data;
+	struct udevice *dev = device->dev;
+	struct stm32_dsi_priv *dsi = dev_get_priv(dev);
+	int idf, ndiv, odf, pll_in_khz, pll_out_khz;
+	int ret, bpp;
+	u32 val;
+
+	/* Update lane capabilities according to hw version */
+	dsi->hw_version = dsi_read(dsi, DSI_VERSION) & VERSION;
+	dsi->lane_min_kbps = LANE_MIN_KBPS;
+	dsi->lane_max_kbps = LANE_MAX_KBPS;
+	if (dsi->hw_version == HWVER_131) {
+		dsi->lane_min_kbps *= 2;
+		dsi->lane_max_kbps *= 2;
+	}
+
+	pll_in_khz = dsi->pllref_clk / 1000;
+
+	/* Compute requested pll out */
+	bpp = mipi_dsi_pixel_format_to_bpp(format);
+	pll_out_khz = (timings->pixelclock.typ / 1000) * bpp / lanes;
+	/* Add 20% to pll out to be higher than pixel bw (burst mode only) */
+	pll_out_khz = (pll_out_khz * 12) / 10;
+	if (pll_out_khz > dsi->lane_max_kbps) {
+		pll_out_khz = dsi->lane_max_kbps;
+		dev_warn(dev, "Warning max phy mbps is used\n");
+	}
+	if (pll_out_khz < dsi->lane_min_kbps) {
+		pll_out_khz = dsi->lane_min_kbps;
+		dev_warn(dev, "Warning min phy mbps is used\n");
+	}
+
+	/* Compute best pll parameters */
+	idf = 0;
+	ndiv = 0;
+	odf = 0;
+	ret = dsi_pll_get_params(dsi, pll_in_khz, pll_out_khz,
+				 &idf, &ndiv, &odf);
+	if (ret) {
+		dev_err(dev, "Warning dsi_pll_get_params(): bad params\n");
+		return ret;
+	}
+
+	/* Get the adjusted pll out value */
+	pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
+
+	/* Set the PLL division factors */
+	dsi_update_bits(dsi, DSI_WRPCR,	WRPCR_NDIV | WRPCR_IDF | WRPCR_ODF,
+			(ndiv << 2) | (idf << 11) | ((ffs(odf) - 1) << 16));
+
+	/* Compute uix4 & set the bit period in high-speed mode */
+	val = 4000000 / pll_out_khz;
+	dsi_update_bits(dsi, DSI_WPCR0, WPCR0_UIX4, val);
+
+	/* Select video mode by resetting DSIM bit */
+	dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM);
+
+	/* Select the color coding */
+	dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX,
+			dsi_color_from_mipi(format) << 1);
+
+	*lane_mbps = pll_out_khz / 1000;
+
+	debug("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
+	      pll_in_khz, pll_out_khz, *lane_mbps);
+
+	return 0;
+}
+
+static const struct mipi_dsi_phy_ops dsi_stm_phy_ops = {
+	.init = dsi_phy_init,
+	.get_lane_mbps = dsi_get_lane_mbps,
+	.post_set_mode = dsi_phy_post_set_mode,
+};
+
+static int stm32_dsi_attach(struct udevice *dev)
+{
+	struct stm32_dsi_priv *priv = dev_get_priv(dev);
+	struct mipi_dsi_device *device = &priv->device;
+	struct mipi_dsi_panel_plat *mplat;
+	struct display_timing timings;
+	int ret;
+
+	ret = uclass_first_device(UCLASS_PANEL, &priv->panel);
+	if (ret) {
+		dev_err(dev, "panel device error %d\n", ret);
+		return ret;
+	}
+
+	mplat = dev_get_platdata(priv->panel);
+	mplat->device = &priv->device;
+
+	ret = panel_get_display_timing(priv->panel, &timings);
+	if (ret) {
+		ret = fdtdec_decode_display_timing(gd->fdt_blob,
+						   dev_of_offset(priv->panel),
+						   0, &timings);
+		if (ret) {
+			dev_err(dev, "decode display timing error %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = uclass_get_device(UCLASS_DSI_HOST, 0, &priv->dsi_host);
+	if (ret) {
+		dev_err(dev, "No video dsi host detected %d\n", ret);
+		return ret;
+	}
+
+	ret = dsi_host_init(priv->dsi_host, device, &timings, 2,
+			    &dsi_stm_phy_ops);
+	if (ret) {
+		dev_err(dev, "failed to initialize mipi dsi host\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int stm32_dsi_set_backlight(struct udevice *dev, int percent)
+{
+	struct stm32_dsi_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	ret = panel_enable_backlight(priv->panel);
+	if (ret) {
+		dev_err(dev, "panel %s enable backlight error %d\n",
+			priv->panel->name, ret);
+		return ret;
+	}
+
+	ret = dsi_host_enable(priv->dsi_host);
+	if (ret) {
+		dev_err(dev, "failed to enable mipi dsi host\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int stm32_dsi_probe(struct udevice *dev)
+{
+	struct stm32_dsi_priv *priv = dev_get_priv(dev);
+	struct mipi_dsi_device *device = &priv->device;
+	struct reset_ctl rst;
+	struct clk clk;
+	int ret;
+
+	device->dev = dev;
+
+	priv->base = (void *)dev_read_addr(dev);
+	if ((fdt_addr_t)priv->base == FDT_ADDR_T_NONE) {
+		dev_err(dev, "dsi dt register address error\n");
+		return -EINVAL;
+	}
+
+	if (IS_ENABLED(CONFIG_DM_REGULATOR)) {
+		ret =  device_get_supply_regulator(dev, "phy-dsi-supply",
+						   &priv->vdd_reg);
+		if (ret && ret != -ENOENT) {
+			dev_err(dev, "Warning: cannot get phy dsi supply\n");
+			return -ENODEV;
+		}
+
+		if (ret != -ENOENT) {
+			ret = regulator_set_enable(priv->vdd_reg, true);
+			if (ret)
+				return ret;
+		}
+	}
+
+	ret = clk_get_by_name(device->dev, "pclk", &clk);
+	if (ret) {
+		dev_err(dev, "peripheral clock get error %d\n", ret);
+		goto err_reg;
+	}
+
+	ret = clk_enable(&clk);
+	if (ret) {
+		dev_err(dev, "peripheral clock enable error %d\n", ret);
+		goto err_reg;
+	}
+
+	ret = clk_get_by_name(dev, "ref", &clk);
+	if (ret) {
+		dev_err(dev, "pll reference clock get error %d\n", ret);
+		goto err_clk;
+	}
+
+	priv->pllref_clk = (unsigned int)clk_get_rate(&clk);
+
+	ret = reset_get_by_index(device->dev, 0, &rst);
+	if (ret) {
+		dev_err(dev, "missing dsi hardware reset\n");
+		goto err_clk;
+	}
+
+	/* Reset */
+	reset_deassert(&rst);
+
+	return 0;
+err_clk:
+	clk_disable(&clk);
+err_reg:
+	if (IS_ENABLED(CONFIG_DM_REGULATOR))
+		regulator_set_enable(priv->vdd_reg, false);
+
+	return ret;
+}
+
+struct video_bridge_ops stm32_dsi_ops = {
+	.attach = stm32_dsi_attach,
+	.set_backlight = stm32_dsi_set_backlight,
+};
+
+static const struct udevice_id stm32_dsi_ids[] = {
+	{ .compatible = "st,stm32-dsi"},
+	{ }
+};
+
+U_BOOT_DRIVER(stm32_dsi) = {
+	.name				= "stm32-display-dsi",
+	.id				= UCLASS_VIDEO_BRIDGE,
+	.of_match			= stm32_dsi_ids,
+	.bind				= dm_scan_fdt_dev,
+	.probe				= stm32_dsi_probe,
+	.ops				= &stm32_dsi_ops,
+	.priv_auto_alloc_size		= sizeof(struct stm32_dsi_priv),
+};
diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c
index dc6c88902f..59ff692b0b 100644
--- a/drivers/video/stm32/stm32_ltdc.c
+++ b/drivers/video/stm32/stm32_ltdc.c
@@ -7,19 +7,18 @@
 
 #include <common.h>
 #include <clk.h>
+#include <display.h>
 #include <dm.h>
 #include <panel.h>
 #include <reset.h>
 #include <video.h>
+#include <video_bridge.h>
 #include <asm/io.h>
 #include <asm/arch/gpio.h>
 #include <dm/device-internal.h>
 
-DECLARE_GLOBAL_DATA_PTR;
-
 struct stm32_ltdc_priv {
 	void __iomem *regs;
-	struct display_timing timing;
 	enum video_log2_bpp l2bpp;
 	u32 bg_col_argb;
 	u32 crop_x, crop_y, crop_w, crop_h;
@@ -174,8 +173,8 @@ static u32 stm32_ltdc_get_pixel_format(enum video_log2_bpp l2bpp)
 	case VIDEO_BPP2:
 	case VIDEO_BPP4:
 	default:
-		debug("%s: warning %dbpp not supported yet, %dbpp instead\n",
-		      __func__, VNBITS(l2bpp), VNBITS(VIDEO_BPP16));
+		pr_warn("%s: warning %dbpp not supported yet, %dbpp instead\n",
+			__func__, VNBITS(l2bpp), VNBITS(VIDEO_BPP16));
 		pf = PF_RGB565;
 		break;
 	}
@@ -209,23 +208,23 @@ static void stm32_ltdc_enable(struct stm32_ltdc_priv *priv)
 	setbits_le32(priv->regs + LTDC_GCR, GCR_LTDCEN);
 }
 
-static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv)
+static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv,
+				struct display_timing *timings)
 {
 	void __iomem *regs = priv->regs;
-	struct display_timing *timing = &priv->timing;
 	u32 hsync, vsync, acc_hbp, acc_vbp, acc_act_w, acc_act_h;
 	u32 total_w, total_h;
 	u32 val;
 
 	/* Convert video timings to ltdc timings */
-	hsync = timing->hsync_len.typ - 1;
-	vsync = timing->vsync_len.typ - 1;
-	acc_hbp = hsync + timing->hback_porch.typ;
-	acc_vbp = vsync + timing->vback_porch.typ;
-	acc_act_w = acc_hbp + timing->hactive.typ;
-	acc_act_h = acc_vbp + timing->vactive.typ;
-	total_w = acc_act_w + timing->hfront_porch.typ;
-	total_h = acc_act_h + timing->vfront_porch.typ;
+	hsync = timings->hsync_len.typ - 1;
+	vsync = timings->vsync_len.typ - 1;
+	acc_hbp = hsync + timings->hback_porch.typ;
+	acc_vbp = vsync + timings->vback_porch.typ;
+	acc_act_w = acc_hbp + timings->hactive.typ;
+	acc_act_h = acc_vbp + timings->vactive.typ;
+	total_w = acc_act_w + timings->hfront_porch.typ;
+	total_h = acc_act_h + timings->vfront_porch.typ;
 
 	/* Synchronization sizes */
 	val = (hsync << 16) | vsync;
@@ -247,14 +246,14 @@ static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv)
 
 	/* Signal polarities */
 	val = 0;
-	debug("%s: timing->flags 0x%08x\n", __func__, timing->flags);
-	if (timing->flags & DISPLAY_FLAGS_HSYNC_HIGH)
+	debug("%s: timing->flags 0x%08x\n", __func__, timings->flags);
+	if (timings->flags & DISPLAY_FLAGS_HSYNC_HIGH)
 		val |= GCR_HSPOL;
-	if (timing->flags & DISPLAY_FLAGS_VSYNC_HIGH)
+	if (timings->flags & DISPLAY_FLAGS_VSYNC_HIGH)
 		val |= GCR_VSPOL;
-	if (timing->flags & DISPLAY_FLAGS_DE_HIGH)
+	if (timings->flags & DISPLAY_FLAGS_DE_HIGH)
 		val |= GCR_DEPOL;
-	if (timing->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+	if (timings->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
 		val |= GCR_PCPOL;
 	clrsetbits_le32(regs + LTDC_GCR,
 			GCR_HSPOL | GCR_VSPOL | GCR_DEPOL | GCR_PCPOL, val);
@@ -330,96 +329,120 @@ static int stm32_ltdc_probe(struct udevice *dev)
 	struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev);
 	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
 	struct stm32_ltdc_priv *priv = dev_get_priv(dev);
-	struct udevice *panel;
+	struct udevice *bridge = NULL;
+	struct udevice *panel = NULL;
+	struct display_timing timings;
 	struct clk pclk;
 	struct reset_ctl rst;
-	int rate, ret;
+	int ret;
 
 	priv->regs = (void *)dev_read_addr(dev);
 	if ((fdt_addr_t)priv->regs == FDT_ADDR_T_NONE) {
-		debug("%s: ltdc dt register address error\n", __func__);
+		dev_err(dev, "ltdc dt register address error\n");
 		return -EINVAL;
 	}
 
 	ret = clk_get_by_index(dev, 0, &pclk);
 	if (ret) {
-		debug("%s: peripheral clock get error %d\n", __func__, ret);
+		dev_err(dev, "peripheral clock get error %d\n", ret);
 		return ret;
 	}
 
 	ret = clk_enable(&pclk);
 	if (ret) {
-		debug("%s: peripheral clock enable error %d\n",
-		      __func__, ret);
+		dev_err(dev, "peripheral clock enable error %d\n", ret);
 		return ret;
 	}
 
-	ret = reset_get_by_index(dev, 0, &rst);
+	ret = uclass_first_device_err(UCLASS_PANEL, &panel);
 	if (ret) {
-		debug("%s: missing ltdc hardware reset\n", __func__);
-		return -ENODEV;
+		if (ret != -ENODEV)
+			dev_err(dev, "panel device error %d\n", ret);
+		return ret;
 	}
 
-	/* Reset */
-	reset_deassert(&rst);
-
-	ret = uclass_first_device(UCLASS_PANEL, &panel);
+	ret = panel_get_display_timing(panel, &timings);
 	if (ret) {
-		debug("%s: panel device error %d\n", __func__, ret);
-		return ret;
+		ret = fdtdec_decode_display_timing(gd->fdt_blob,
+						   dev_of_offset(panel),
+						   0, &timings);
+		if (ret) {
+			dev_err(dev, "decode display timing error %d\n", ret);
+			return ret;
+		}
 	}
 
-	ret = panel_enable_backlight(panel);
+	ret = clk_set_rate(&pclk, timings.pixelclock.typ);
+	if (ret)
+		dev_warn(dev, "fail to set pixel clock %d hz\n",
+			 timings.pixelclock.typ);
+
+	debug("%s: Set pixel clock req %d hz get %ld hz\n", __func__,
+	      timings.pixelclock.typ, clk_get_rate(&pclk));
+
+	ret = reset_get_by_index(dev, 0, &rst);
 	if (ret) {
-		debug("%s: panel %s enable backlight error %d\n",
-		      __func__, panel->name, ret);
+		dev_err(dev, "missing ltdc hardware reset\n");
 		return ret;
 	}
 
-	ret = fdtdec_decode_display_timing(gd->fdt_blob,
-					   dev_of_offset(dev), 0,
-					   &priv->timing);
-	if (ret) {
-		debug("%s: decode display timing error %d\n",
-		      __func__, ret);
-		return -EINVAL;
-	}
+	/* Reset */
+	reset_deassert(&rst);
 
-	rate = clk_set_rate(&pclk, priv->timing.pixelclock.typ);
-	if (rate < 0) {
-		debug("%s: fail to set pixel clock %d hz %d hz\n",
-		      __func__, priv->timing.pixelclock.typ, rate);
-		return rate;
+	if (IS_ENABLED(CONFIG_VIDEO_BRIDGE)) {
+		ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &bridge);
+		if (ret)
+			debug("No video bridge, or no backlight on bridge\n");
+
+		if (bridge) {
+			ret = video_bridge_attach(bridge);
+			if (ret) {
+				dev_err(dev, "fail to attach bridge\n");
+				return ret;
+			}
+		}
 	}
 
-	debug("%s: Set pixel clock req %d hz get %d hz\n", __func__,
-	      priv->timing.pixelclock.typ, rate);
-
 	/* TODO Below parameters are hard-coded for the moment... */
 	priv->l2bpp = VIDEO_BPP16;
 	priv->bg_col_argb = 0xFFFFFFFF; /* white no transparency */
 	priv->crop_x = 0;
 	priv->crop_y = 0;
-	priv->crop_w = priv->timing.hactive.typ;
-	priv->crop_h = priv->timing.vactive.typ;
+	priv->crop_w = timings.hactive.typ;
+	priv->crop_h = timings.vactive.typ;
 	priv->alpha = 0xFF;
 
 	debug("%s: %dx%d %dbpp frame buffer at 0x%lx\n", __func__,
-	      priv->timing.hactive.typ, priv->timing.vactive.typ,
+	      timings.hactive.typ, timings.vactive.typ,
 	      VNBITS(priv->l2bpp), uc_plat->base);
 	debug("%s: crop %d,%d %dx%d bg 0x%08x alpha %d\n", __func__,
 	      priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h,
 	      priv->bg_col_argb, priv->alpha);
 
 	/* Configure & start LTDC */
-	stm32_ltdc_set_mode(priv);
+	stm32_ltdc_set_mode(priv, &timings);
 	stm32_ltdc_set_layer1(priv, uc_plat->base);
 	stm32_ltdc_enable(priv);
 
-	uc_priv->xsize = priv->timing.hactive.typ;
-	uc_priv->ysize = priv->timing.vactive.typ;
+	uc_priv->xsize = timings.hactive.typ;
+	uc_priv->ysize = timings.vactive.typ;
 	uc_priv->bpix = priv->l2bpp;
 
+	if (!bridge) {
+		ret = panel_enable_backlight(panel);
+		if (ret) {
+			dev_err(dev, "panel %s enable backlight error %d\n",
+				panel->name, ret);
+			return ret;
+		}
+	} else if (IS_ENABLED(CONFIG_VIDEO_BRIDGE)) {
+		ret = video_bridge_set_backlight(bridge, 80);
+		if (ret) {
+			dev_err(dev, "fail to set backlight\n");
+			return ret;
+		}
+	}
+
 	video_set_flush_dcache(dev, true);
 
 	return 0;
diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h
index 92660fe2a0..988992b336 100644
--- a/include/configs/stm32mp1.h
+++ b/include/configs/stm32mp1.h
@@ -83,6 +83,13 @@
 #define CONFIG_SYS_MTDPARTS_RUNTIME
 #endif
 
+#ifdef CONFIG_DM_VIDEO
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_BMP_16BPP
+#define CONFIG_BMP_24BPP
+#define CONFIG_BMP_32BPP
+#endif
+
 /*****************************************************************************/
 #ifdef CONFIG_DISTRO_DEFAULTS
 /*****************************************************************************/
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index f431f3bf29..f7f323752c 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -40,6 +40,7 @@ enum uclass_id {
 	UCLASS_CPU,		/* CPU, typically part of an SoC */
 	UCLASS_CROS_EC,		/* Chrome OS EC */
 	UCLASS_DISPLAY,		/* Display (e.g. DisplayPort, HDMI) */
+	UCLASS_DSI_HOST,	/* Display Serial Interface host */
 	UCLASS_DMA,		/* Direct Memory Access */
 	UCLASS_EFI,		/* EFI managed devices */
 	UCLASS_ETH,		/* Ethernet device */
diff --git a/include/dsi_host.h b/include/dsi_host.h
new file mode 100644
index 0000000000..9dfc7b3687
--- /dev/null
+++ b/include/dsi_host.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
+ * Author(s): Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
+ *
+ */
+
+#ifndef _DSI_HOST_H
+#define _DSI_HOST_H
+
+#include <mipi_dsi.h>
+
+struct dsi_host_ops {
+	/**
+	 * init() - initialized the dsi_host
+	 *
+	 * @dev: dsi host device
+	 * @device: DSI peripheral device
+	 * @timing: Display timings
+	 * @max_data_lanes: maximum number of data lines
+	 * @phy_ops: set of function pointers for performing physical operations
+	 * @return 0 if OK, -ve on error
+	 */
+	int (*init)(struct udevice *dev,
+		    struct mipi_dsi_device *device,
+		    struct display_timing *timings,
+		    unsigned int max_data_lanes,
+		    const struct mipi_dsi_phy_ops *phy_ops);
+
+	/**
+	 * enable() - Enable the dsi_host
+	 *
+	 * @dev: dsi host device
+	 * @return 0 if OK, -ve on error
+	 */
+	int (*enable)(struct udevice *dev);
+
+	/**
+	 * disable() - Disable the dsi_host
+	 *
+	 * @dev: dsi host device
+	 * @return 0 if OK, -ve on error
+	 */
+	int (*disable)(struct udevice *dev);
+};
+
+#define dsi_host_get_ops(dev)	((struct dsi_host_ops *)(dev)->driver->ops)
+
+/**
+ * dsi_host_init
+ *
+ * @dev: dsi host device
+ * @device: DSI peripheral device
+ * @timing: Display timings
+ * @max_data_lanes: maximum number of data lines
+ * @phy_ops: set of function pointers for performing physical operations
+ * @return 0 if OK, -ve on error
+ */
+int dsi_host_init(struct udevice *dev,
+		  struct mipi_dsi_device *device,
+		  struct display_timing *timings,
+		  unsigned int max_data_lanes,
+		  const struct mipi_dsi_phy_ops *phy_ops);
+
+/**
+ * dsi_host_enable
+ *
+ * @dev:	dsi host device
+ * @return 0 if OK, -ve on error
+ */
+int dsi_host_enable(struct udevice *dev);
+
+#endif
diff --git a/include/mipi_display.h b/include/mipi_display.h
index ddcc8ca731..19aa65a355 100644
--- a/include/mipi_display.h
+++ b/include/mipi_display.h
@@ -115,6 +115,14 @@ enum {
 	MIPI_DCS_READ_MEMORY_CONTINUE	= 0x3E,
 	MIPI_DCS_SET_TEAR_SCANLINE	= 0x44,
 	MIPI_DCS_GET_SCANLINE		= 0x45,
+	MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51,		/* MIPI DCS 1.3 */
+	MIPI_DCS_GET_DISPLAY_BRIGHTNESS = 0x52,		/* MIPI DCS 1.3 */
+	MIPI_DCS_WRITE_CONTROL_DISPLAY  = 0x53,		/* MIPI DCS 1.3 */
+	MIPI_DCS_GET_CONTROL_DISPLAY	= 0x54,		/* MIPI DCS 1.3 */
+	MIPI_DCS_WRITE_POWER_SAVE	= 0x55,		/* MIPI DCS 1.3 */
+	MIPI_DCS_GET_POWER_SAVE		= 0x56,		/* MIPI DCS 1.3 */
+	MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E,	/* MIPI DCS 1.3 */
+	MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F,	/* MIPI DCS 1.3 */
 	MIPI_DCS_READ_DDB_START		= 0xA1,
 	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
 };
diff --git a/include/mipi_dsi.h b/include/mipi_dsi.h
new file mode 100644
index 0000000000..f4a63b47f3
--- /dev/null
+++ b/include/mipi_dsi.h
@@ -0,0 +1,466 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * MIPI DSI Bus
+ *
+ * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
+ * Copyright (C) 2018 STMicroelectronics - All Rights Reserved
+ * Author(s): Andrzej Hajda <a.hajda@samsung.com>
+ *            Yannick Fertre <yannick.fertre@st.com>
+ *            Philippe Cornu <philippe.cornu@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef MIPI_DSI_H
+#define MIPI_DSI_H
+
+#include <mipi_display.h>
+
+struct mipi_dsi_host;
+struct mipi_dsi_device;
+
+/* request ACK from peripheral */
+#define MIPI_DSI_MSG_REQ_ACK	BIT(0)
+/* use Low Power Mode to transmit message */
+#define MIPI_DSI_MSG_USE_LPM	BIT(1)
+
+/**
+ * struct mipi_dsi_msg - read/write DSI buffer
+ * @channel: virtual channel id
+ * @type: payload data type
+ * @flags: flags controlling this message transmission
+ * @tx_len: length of @tx_buf
+ * @tx_buf: data to be written
+ * @rx_len: length of @rx_buf
+ * @rx_buf: data to be read, or NULL
+ */
+struct mipi_dsi_msg {
+	u8 channel;
+	u8 type;
+	u16 flags;
+
+	size_t tx_len;
+	const void *tx_buf;
+
+	size_t rx_len;
+	void *rx_buf;
+};
+
+bool mipi_dsi_packet_format_is_short(u8 type);
+bool mipi_dsi_packet_format_is_long(u8 type);
+
+/**
+ * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
+ * @size: size (in bytes) of the packet
+ * @header: the four bytes that make up the header (Data ID, Word Count or
+ *     Packet Data, and ECC)
+ * @payload_length: number of bytes in the payload
+ * @payload: a pointer to a buffer containing the payload, if any
+ */
+struct mipi_dsi_packet {
+	size_t size;
+	u8 header[4];
+	size_t payload_length;
+	const u8 *payload;
+};
+
+int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
+			   const struct mipi_dsi_msg *msg);
+
+/**
+ * struct mipi_dsi_host_ops - DSI bus operations
+ * @attach: attach DSI device to DSI host
+ * @detach: detach DSI device from DSI host
+ * @transfer: transmit a DSI packet
+ *
+ * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg
+ * structures. This structure contains information about the type of packet
+ * being transmitted as well as the transmit and receive buffers. When an
+ * error is encountered during transmission, this function will return a
+ * negative error code. On success it shall return the number of bytes
+ * transmitted for write packets or the number of bytes received for read
+ * packets.
+ *
+ * Note that typically DSI packet transmission is atomic, so the .transfer()
+ * function will seldomly return anything other than the number of bytes
+ * contained in the transmit buffer on success.
+ */
+struct mipi_dsi_host_ops {
+	int (*attach)(struct mipi_dsi_host *host,
+		      struct mipi_dsi_device *dsi);
+	int (*detach)(struct mipi_dsi_host *host,
+		      struct mipi_dsi_device *dsi);
+	ssize_t (*transfer)(struct mipi_dsi_host *host,
+			    const struct mipi_dsi_msg *msg);
+};
+
+/**
+ * struct mipi_dsi_phy_ops - DSI host physical operations
+ * @init: initialized host physical part
+ * @get_lane_mbps: get lane bitrate per lane (mbps)
+ * @post_set_mode: operation that should after set mode
+ */
+struct mipi_dsi_phy_ops {
+	int (*init)(void *priv_data);
+	int (*get_lane_mbps)(void *priv_data, struct display_timing *timings,
+			     u32 lanes, u32 format, unsigned int *lane_mbps);
+	void (*post_set_mode)(void *priv_data,  unsigned long mode_flags);
+};
+
+/**
+ * struct mipi_dsi_host - DSI host device
+ * @dev: driver model device node for this DSI host
+ * @ops: DSI host operations
+ * @list: list management
+ */
+struct mipi_dsi_host {
+	struct device *dev;
+	const struct mipi_dsi_host_ops *ops;
+	struct list_head list;
+};
+
+/* DSI mode flags */
+
+/* video mode */
+#define MIPI_DSI_MODE_VIDEO		BIT(0)
+/* video burst mode */
+#define MIPI_DSI_MODE_VIDEO_BURST	BIT(1)
+/* video pulse mode */
+#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE	BIT(2)
+/* enable auto vertical count mode */
+#define MIPI_DSI_MODE_VIDEO_AUTO_VERT	BIT(3)
+/* enable hsync-end packets in vsync-pulse and v-porch area */
+#define MIPI_DSI_MODE_VIDEO_HSE		BIT(4)
+/* disable hfront-porch area */
+#define MIPI_DSI_MODE_VIDEO_HFP		BIT(5)
+/* disable hback-porch area */
+#define MIPI_DSI_MODE_VIDEO_HBP		BIT(6)
+/* disable hsync-active area */
+#define MIPI_DSI_MODE_VIDEO_HSA		BIT(7)
+/* flush display FIFO on vsync pulse */
+#define MIPI_DSI_MODE_VSYNC_FLUSH	BIT(8)
+/* disable EoT packets in HS mode */
+#define MIPI_DSI_MODE_EOT_PACKET	BIT(9)
+/* device supports non-continuous clock behavior (DSI spec 5.6.1) */
+#define MIPI_DSI_CLOCK_NON_CONTINUOUS	BIT(10)
+/* transmit data in low power */
+#define MIPI_DSI_MODE_LPM		BIT(11)
+
+enum mipi_dsi_pixel_format {
+	MIPI_DSI_FMT_RGB888,
+	MIPI_DSI_FMT_RGB666,
+	MIPI_DSI_FMT_RGB666_PACKED,
+	MIPI_DSI_FMT_RGB565,
+};
+
+#define DSI_DEV_NAME_SIZE		20
+
+/**
+ * struct mipi_dsi_device_info - template for creating a mipi_dsi_device
+ * @type: DSI peripheral chip type
+ * @channel: DSI virtual channel assigned to peripheral
+ * @node: pointer to OF device node or NULL
+ *
+ * This is populated and passed to mipi_dsi_device_new to create a new
+ * DSI device
+ */
+struct mipi_dsi_device_info {
+	char type[DSI_DEV_NAME_SIZE];
+	u32 channel;
+	struct device_node *node;
+};
+
+/**
+ * struct mipi_dsi_device - DSI peripheral device
+ * @host: DSI host for this peripheral
+ * @dev: driver model device node for this peripheral
+ * @name: DSI peripheral chip type
+ * @channel: virtual channel assigned to the peripheral
+ * @format: pixel format for video mode
+ * @lanes: number of active data lanes
+ * @mode_flags: DSI operation mode related flags
+ */
+struct mipi_dsi_device {
+	struct mipi_dsi_host *host;
+	struct udevice *dev;
+
+	char name[DSI_DEV_NAME_SIZE];
+	unsigned int channel;
+	unsigned int lanes;
+	enum mipi_dsi_pixel_format format;
+	unsigned long mode_flags;
+};
+
+/**
+ * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any
+ *                                given pixel format defined by the MIPI DSI
+ *                                specification
+ * @fmt: MIPI DSI pixel format
+ *
+ * Returns: The number of bits per pixel of the given pixel format.
+ */
+static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
+{
+	switch (fmt) {
+	case MIPI_DSI_FMT_RGB888:
+	case MIPI_DSI_FMT_RGB666:
+		return 24;
+
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		return 18;
+
+	case MIPI_DSI_FMT_RGB565:
+		return 16;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * struct mipi_dsi_panel_plat - DSI panel platform data
+ * @device: DSI peripheral device
+ */
+struct mipi_dsi_panel_plat {
+	struct mipi_dsi_device *device;
+};
+
+/**
+ * mipi_dsi_attach - attach a DSI device to its DSI host
+ * @dsi: DSI peripheral
+ */
+int mipi_dsi_attach(struct mipi_dsi_device *dsi);
+
+/**
+ * mipi_dsi_detach - detach a DSI device from its DSI host
+ * @dsi: DSI peripheral
+ */
+int mipi_dsi_detach(struct mipi_dsi_device *dsi);
+int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi);
+int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi);
+int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
+					    u16 value);
+
+ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
+			       size_t size);
+ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
+			      size_t num_params, void *data, size_t size);
+
+/**
+ * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode
+ * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking
+ *    information only
+ * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both
+ *    V-Blanking and H-Blanking information
+ */
+enum mipi_dsi_dcs_tear_mode {
+	MIPI_DSI_DCS_TEAR_MODE_VBLANK,
+	MIPI_DSI_DCS_TEAR_MODE_VHBLANK,
+};
+
+#define MIPI_DSI_DCS_POWER_MODE_DISPLAY BIT(2)
+#define MIPI_DSI_DCS_POWER_MODE_NORMAL  BIT(3)
+#define MIPI_DSI_DCS_POWER_MODE_SLEEP   BIT(4)
+#define MIPI_DSI_DCS_POWER_MODE_PARTIAL BIT(5)
+#define MIPI_DSI_DCS_POWER_MODE_IDLE    BIT(6)
+
+/**
+ * mipi_dsi_dcs_write_buffer() - transmit a DCS command with payload
+ * @dsi: DSI peripheral device
+ * @data: buffer containing data to be transmitted
+ * @len: size of transmission buffer
+ *
+ * This function will automatically choose the right data type depending on
+ * the command payload length.
+ *
+ * Return: The number of bytes successfully transmitted or a negative error
+ * code on failure.
+ */
+ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
+				  const void *data, size_t len);
+
+/**
+ * mipi_dsi_dcs_write() - send DCS write command
+ * @dsi: DSI peripheral device
+ * @cmd: DCS command
+ * @data: buffer containing the command payload
+ * @len: command payload length
+ *
+ * This function will automatically choose the right data type depending on
+ * the command payload length.
+
+ * code on failure.
+ */
+ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
+			   const void *data, size_t len);
+
+/**
+ * mipi_dsi_dcs_read() - send DCS read request command
+ * @dsi: DSI peripheral device
+ * @cmd: DCS command
+ * @data: buffer in which to receive data
+ * @len: size of receive buffer
+ *
+ * Return: The number of bytes read or a negative error code on failure.
+ */
+ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
+			  size_t len);
+
+/**
+ * mipi_dsi_dcs_nop() - send DCS nop packet
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi);
+
+/**
+ * mipi_dsi_dcs_soft_reset() - perform a software reset of the display module
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi);
+
+/**
+ * mipi_dsi_dcs_get_power_mode() - query the display module's current power
+ *    mode
+ * @dsi: DSI peripheral device
+ * @mode: return location for the current power mode
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode);
+
+/**
+ * mipi_dsi_dcs_get_pixel_format() - gets the pixel format for the RGB image
+ *    data used by the interface
+ * @dsi: DSI peripheral device
+ * @format: return location for the pixel format
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format);
+
+/**
+ * mipi_dsi_dcs_enter_sleep_mode() - disable all unnecessary blocks inside the
+ *    display module except interface communication
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi);
+
+/**
+ * mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display
+ *    module
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi);
+
+/**
+ * mipi_dsi_dcs_set_display_off() - stop displaying the image data on the
+ *    display device
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi);
+
+/**
+ * mipi_dsi_dcs_set_display_on() - start displaying the image data on the
+ *    display device
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi);
+
+/**
+ * mipi_dsi_dcs_set_column_address() - define the column extent of the frame
+ *    memory accessed by the host processor
+ * @dsi: DSI peripheral device
+ * @start: first column of frame memory
+ * @end: last column of frame memory
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
+				    u16 end);
+/**
+ * mipi_dsi_dcs_set_page_address() - define the page extent of the frame
+ *    memory accessed by the host processor
+ * @dsi: DSI peripheral device
+ * @start: first page of frame memory
+ * @end: last page of frame memory
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
+				  u16 end);
+
+/**
+ * mipi_dsi_dcs_set_tear_off() - turn off the display module's Tearing Effect
+ *    output signal on the TE signal line
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
+
+/**
+ * mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect
+ *    output signal on the TE signal line.
+ * @dsi: DSI peripheral device
+ * @mode: the Tearing Effect Output Line mode
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
+			     enum mipi_dsi_dcs_tear_mode mode);
+
+/**
+ * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
+ *    data used by the interface
+ * @dsi: DSI peripheral device
+ * @format: pixel format
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format);
+
+/**
+ * mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for
+ *    the Tearing Effect output signal of the display module
+ * @dsi: DSI peripheral device
+ * @scanline: scanline to use as trigger
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline);
+
+/**
+ * mipi_dsi_dcs_set_display_brightness() - sets the brightness value of the
+ *    display
+ * @dsi: DSI peripheral device
+ * @brightness: brightness value
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
+					u16 brightness);
+
+/**
+ * mipi_dsi_dcs_get_display_brightness() - gets the current brightness value
+ *    of the display
+ * @dsi: DSI peripheral device
+ * @brightness: brightness value
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
+					u16 *brightness);
+
+#endif /* MIPI_DSI_H */
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 55a7940053..0c2fd5cb5e 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_BLK) += blk.o
 obj-$(CONFIG_BOARD) += board.o
 obj-$(CONFIG_DM_BOOTCOUNT) += bootcount.o
 obj-$(CONFIG_CLK) += clk.o clk_ccf.o
+obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi_host.o
 obj-$(CONFIG_DM_ETH) += eth.o
 obj-$(CONFIG_FIRMWARE) += firmware.o
 obj-$(CONFIG_DM_GPIO) += gpio.o
diff --git a/test/dm/dsi_host.c b/test/dm/dsi_host.c
new file mode 100644
index 0000000000..59fcd5558f
--- /dev/null
+++ b/test/dm/dsi_host.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
+ * Author(s): Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dsi_host.h>
+#include <asm/state.h>
+#include <asm/test.h>
+#include <dm/test.h>
+#include <test/ut.h>
+
+static int dm_test_dsi_host_phy_init(void *priv_data)
+{
+	return 0;
+}
+
+static void dm_test_dsi_host_phy_post_set_mode(void *priv_data,
+					       unsigned long mode_flags)
+{
+}
+
+static int dm_test_dsi_host_phy_get_lane_mbps(void *priv_data,
+					      struct display_timing *timings,
+					      u32 lanes,
+					      u32 format,
+					      unsigned int *lane_mbps)
+{
+	return 0;
+}
+
+static const struct mipi_dsi_phy_ops dm_test_dsi_host_phy_ops = {
+	.init = dm_test_dsi_host_phy_init,
+	.get_lane_mbps = dm_test_dsi_host_phy_get_lane_mbps,
+	.post_set_mode = dm_test_dsi_host_phy_post_set_mode,
+};
+
+/* Test that dsi_host driver functions are called */
+static int dm_test_dsi_host(struct unit_test_state *uts)
+{
+	struct udevice *dev;
+	struct mipi_dsi_device device;
+	struct display_timing timings;
+	unsigned int max_data_lanes = 4;
+
+	ut_assertok(uclass_first_device_err(UCLASS_DSI_HOST, &dev));
+
+	ut_assertok(dsi_host_init(dev, &device, &timings, max_data_lanes,
+				  &dm_test_dsi_host_phy_ops));
+
+	ut_assertok(dsi_host_enable(dev));
+
+	return 0;
+}
+
+DM_TEST(dm_test_dsi_host, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);