diff options
| author | Stefan Mavrodiev <stefan@olimex.com> | 2017-11-03 08:56:51 +0200 |
|---|---|---|
| committer | Jagan Teki <jagan@amarulasolutions.com> | 2017-12-07 10:57:23 +0530 |
| commit | aba3924927263f23d8ca302b52b1988ed924e5b1 (patch) | |
| tree | 9d9c1b9f15d5b8586b30ad32566b1abdbe825db8 | |
| parent | 64089178219371a512ddca8016d78bfdbe84565d (diff) | |
| download | u-boot-aba3924927263f23d8ca302b52b1988ed924e5b1.tar.gz | |
sunxi: Fix A20-OLinuXino-MICRO LAN8710 support
>From revision J the board uses new phy chip LAN8710. Compared
with RTL8201, RA17 pin is TXERR. It has pullup which causes phy
not to work. To fix this PA17 is muxed with GMAC function. This
makes the pin output-low.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
| -rw-r--r-- | board/sunxi/gmac.c | 4 | ||||
| -rw-r--r-- | configs/A20-OLinuXino_MICRO-eMMC_defconfig | 1 | ||||
| -rw-r--r-- | configs/A20-OLinuXino_MICRO_defconfig | 1 | ||||
| -rw-r--r-- | drivers/net/Kconfig | 8 |
4 files changed, 14 insertions, 0 deletions
diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c index 69eb8ff2d9..826650c89b 100644 --- a/board/sunxi/gmac.c +++ b/board/sunxi/gmac.c @@ -33,7 +33,11 @@ void eth_init_board(void) #ifndef CONFIG_MACH_SUN6I /* Configure pin mux settings for GMAC */ +#ifdef CONFIG_SUN7I_GMAC_FORCE_TXERR + for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++) { +#else for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) { +#endif #ifdef CONFIG_RGMII /* skip unused pins in RGMII mode */ if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14)) diff --git a/configs/A20-OLinuXino_MICRO-eMMC_defconfig b/configs/A20-OLinuXino_MICRO-eMMC_defconfig index 2ff2723065..43bcea92a5 100644 --- a/configs/A20-OLinuXino_MICRO-eMMC_defconfig +++ b/configs/A20-OLinuXino_MICRO-eMMC_defconfig @@ -19,6 +19,7 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_ETH_DESIGNWARE=y CONFIG_SUN7I_GMAC=y +CONFIG_SUN7I_GMAC_FORCE_TXERR=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index 1a0ad5a6d4..22eacb370e 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -20,6 +20,7 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_ETH_DESIGNWARE=y CONFIG_SUN7I_GMAC=y +CONFIG_SUN7I_GMAC_FORCE_TXERR=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 52555da4b3..d42d915f17 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -244,6 +244,14 @@ config SUN7I_GMAC help Enable the support for Sun7i GMAC Ethernet controller +config SUN7I_GMAC_FORCE_TXERR + bool "Force PA17 as gmac function" + depends on SUN7I_GMAC + help + Some ethernet phys needs TXERR control. Since the GMAC + doesn't have such signal, setting PA17 as GMAC function + makes the pin output low, which enables data transmission. + config SUN4I_EMAC bool "Allwinner Sun4i Ethernet MAC support" depends on DM_ETH |