path: root/pxelinux.asm

; -*- fundamental -*- (asm-mode sucks)
; ****************************************************************************
;
;  pxelinux.asm
;
;  A program to boot Linux kernels off a TFTP server using the Intel PXE
;  network booting API.  It is based on the SYSLINUX boot loader for
;  MS-DOS floppies.
;
;   Copyright (C) 1994-2006  H. Peter Anvin
;
;  This program is free software; you can redistribute it and/or modify
;  it under the terms of the GNU General Public License as published by
;  the Free Software Foundation, Inc., 53 Temple Place Ste 330,
;  Boston MA 02111-1307, USA; either version 2 of the License, or
;  (at your option) any later version; incorporated herein by reference.
;
; ****************************************************************************

%define IS_PXELINUX 1
%include "head.inc"
%include "pxe.inc"

;
; Some semi-configurable constants... change on your own risk.
;
my_id		equ pxelinux_id
FILENAME_MAX_LG2 equ 7			; log2(Max filename size Including final null)
FILENAME_MAX	equ (1 << FILENAME_MAX_LG2)
NULLFILE	equ 0			; Zero byte == null file name
NULLOFFSET	equ 4			; Position in which to look
REBOOT_TIME	equ 5*60		; If failure, time until full reset
%assign HIGHMEM_SLOP 128*1024		; Avoid this much memory near the top
MAX_OPEN_LG2	equ 5			; log2(Max number of open sockets)
MAX_OPEN	equ (1 << MAX_OPEN_LG2)
PKTBUF_SIZE	equ (65536/MAX_OPEN)	; Per-socket packet buffer size
TFTP_PORT	equ htons(69)		; Default TFTP port
PKT_RETRY	equ 6			; Packet transmit retry count
PKT_TIMEOUT	equ 12			; Initial timeout, timer ticks @ 55 ms
; Desired TFTP block size
; For Ethernet MTU is normally 1500.  Unfortunately there seems to
; be a fair number of networks with "substandard" MTUs which break.
; The code assumes TFTP_LARGEBLK <= 2K.
TFTP_MTU	equ 1472
TFTP_LARGEBLK	equ (TFTP_MTU-20-8-4)	; MTU - IP hdr - UDP hdr - TFTP hdr
; Standard TFTP block size
TFTP_BLOCKSIZE_LG2 equ 9		; log2(bytes/block)
TFTP_BLOCKSIZE	equ (1 << TFTP_BLOCKSIZE_LG2)
%assign USE_PXE_PROVIDED_STACK 1	; Use stack provided by PXE?

SECTOR_SHIFT	equ TFTP_BLOCKSIZE_LG2
SECTOR_SIZE	equ TFTP_BLOCKSIZE

;
; This is what we need to do when idle
;
%define HAVE_IDLE 1			; idle is not a noop

%macro	RESET_IDLE 0
	call reset_idle
%endmacro
%macro	DO_IDLE 0
	call check_for_arp
%endmacro

;
; TFTP operation codes
;
TFTP_RRQ	equ htons(1)		; Read request
TFTP_WRQ	equ htons(2)		; Write request
TFTP_DATA	equ htons(3)		; Data packet
TFTP_ACK	equ htons(4)		; ACK packet
TFTP_ERROR	equ htons(5)		; ERROR packet
TFTP_OACK	equ htons(6)		; OACK packet

;
; TFTP error codes
;
TFTP_EUNDEF	equ htons(0)		; Unspecified error
TFTP_ENOTFOUND	equ htons(1)		; File not found
TFTP_EACCESS	equ htons(2)		; Access violation
TFTP_ENOSPACE	equ htons(3)		; Disk full
TFTP_EBADOP	equ htons(4)		; Invalid TFTP operation
TFTP_EBADID	equ htons(5)		; Unknown transfer
TFTP_EEXISTS	equ htons(6)		; File exists
TFTP_ENOUSER	equ htons(7)		; No such user
TFTP_EOPTNEG	equ htons(8)		; Option negotiation failure

;
; The following structure is used for "virtual kernels"; i.e. LILO-style
; option labels.  The options we permit here are `kernel' and `append
; Since there is no room in the bottom 64K for all of these, we
; stick them at vk_seg:0000 and copy them down before we need them.
;
		struc vkernel
vk_vname:	resb FILENAME_MAX	; Virtual name **MUST BE FIRST!**
vk_rname:	resb FILENAME_MAX	; Real name
vk_ipappend:	resb 1			; "IPAPPEND" flag
vk_type:	resb 1			; Type of file
vk_appendlen:	resw 1
		alignb 4
vk_append:	resb max_cmd_len+1	; Command line
		alignb 4
vk_end:		equ $			; Should be <= vk_size
		endstruc

;
; Segment assignments in the bottom 640K
; 0000h - main code/data segment (and BIOS segment)
;
real_mode_seg	equ 4000h
vk_seg          equ 3000h		; Virtual kernels
xfer_buf_seg	equ 2000h		; Bounce buffer for I/O to high mem
pktbuf_seg	equ 1000h		; Packet buffers segments
comboot_seg	equ real_mode_seg	; COMBOOT image loading zone

;
; BOOTP/DHCP packet pattern
;
		struc bootp_t
bootp:
.opcode		resb 1			; BOOTP/DHCP "opcode"
.hardware	resb 1			; ARP hardware type
.hardlen	resb 1			; Hardware address length
.gatehops	resb 1			; Used by forwarders
.ident		resd 1			; Transaction ID
.seconds	resw 1			; Seconds elapsed
.flags		resw 1			; Broadcast flags
.cip		resd 1			; Client IP
.yip		resd 1			; "Your" IP
.sip		resd 1			; Next server IP
.gip		resd 1			; Relay agent IP
.macaddr	resb 16			; Client MAC address
.sname		resb 64			; Server name (optional)
.bootfile	resb 128		; Boot file name
.option_magic	resd 1			; Vendor option magic cookie
.options	resb 1260		; Vendor options
		endstruc

BOOTP_OPTION_MAGIC	equ htonl(0x63825363)	; See RFC 2132

;
; TFTP connection data structure.  Each one of these corresponds to a local
; UDP port.  The size of this structure must be a power of 2.
; HBO = host byte order; NBO = network byte order
; (*) = written by options negotiation code, must be dword sized
;
		struc open_file_t
tftp_localport	resw 1			; Local port number	(0 = not in use)
tftp_remoteport	resw 1			; Remote port number
tftp_remoteip	resd 1			; Remote IP address
tftp_filepos	resd 1			; Bytes downloaded (including buffer)
tftp_filesize	resd 1			; Total file size(*)
tftp_blksize	resd 1			; Block size for this connection(*)
tftp_bytesleft	resw 1			; Unclaimed data bytes
tftp_lastpkt	resw 1			; Sequence number of last packet (NBO)
tftp_dataptr	resw 1			; Pointer to available data
		resw 2			; Currently unusued
		; At end since it should not be zeroed on socked close
tftp_pktbuf	resw 1			; Packet buffer offset
		endstruc
%ifndef DEPEND
%if (open_file_t_size & (open_file_t_size-1))
%error "open_file_t is not a power of 2"
%endif
%endif

; ---------------------------------------------------------------------------
;   BEGIN CODE
; ---------------------------------------------------------------------------

;
; Memory below this point is reserved for the BIOS and the MBR
;
 		section .earlybss
trackbufsize	equ 8192
trackbuf	resb trackbufsize	; Track buffer goes here
getcbuf		resb trackbufsize
		; ends at 4800h

		; Put some large buffers here, before RBFG_brainfuck,
		; where we can still carefully control the address
		; assignments...

		alignb open_file_t_size
Files		resb MAX_OPEN*open_file_t_size

		alignb FILENAME_MAX
BootFile	resb 256		; Boot file from DHCP packet
ConfigServer	resd 1			; Null prefix for mangled config name
ConfigName	resb 256-4		; Configuration file from DHCP option
PathPrefix	resb 256		; Path prefix derived from boot file
DotQuadBuf	resb 16			; Buffer for dotted-quad IP address
IPOption	resb 80			; ip= option buffer
InitStack	resd 1			; Pointer to reset stack (SS:SP)
PXEStack	resd 1			; Saved stack during PXE call

; Warning here: RBFG build 22 randomly overwrites memory location
; [0x5680,0x576c), possibly more.  It seems that it gets confused and
; screws up the pointer to its own internal packet buffer and starts
; writing a received ARP packet into low memory.
RBFG_brainfuck	resb 0E00h

		section .latebss
		alignb 4
RebootTime	resd 1			; Reboot timeout, if set by option
StrucPtr	resd 1			; Pointer to PXENV+ or !PXE structure
APIVer		resw 1			; PXE API version found
IPOptionLen	resw 1			; Length of IPOption
IdleTimer	resw 1			; Time to check for ARP?
LocalBootType	resw 1			; Local boot return code
PktTimeout	resw 1			; Timeout for current packet
RealBaseMem	resw 1			; Amount of DOS memory after freeing
OverLoad	resb 1			; Set if DHCP packet uses "overloading"

; The relative position of these fields matter!
MACLen		resb 1			; MAC address len
MACType		resb 1			; MAC address type
MAC		resb 16			; Actual MAC address
BOOTIFStr	resb 7			; Space for "BOOTIF="
MACStr		resb 3*17		; MAC address as a string

;
; PXE packets which don't need static initialization
;
		alignb 4
pxe_unload_stack_pkt:
.status:	resw 1			; Status
.reserved:	resw 10			; Reserved
pxe_unload_stack_pkt_len	equ $-pxe_unload_stack_pkt

		alignb 16
		; BOOTP/DHCP packet buffer

		alignb 16
packet_buf	resb 2048		; Transfer packet
packet_buf_size	equ $-packet_buf

;
; Constants for the xfer_buf_seg
;
; The xfer_buf_seg is also used to store message file buffers.  We
; need two trackbuffers (text and graphics), plus a work buffer
; for the graphics decompressor.
;
xbs_textbuf	equ 0			; Also hard-coded, do not change
xbs_vgabuf	equ trackbufsize
xbs_vgatmpbuf	equ 2*trackbufsize

		section .text
		;
		; PXELINUX needs more BSS than the other derivatives;
		; therefore we relocate it from 7C00h on startup.
		;
StackBuf	equ $			; Base of stack if we use our own

;
; Primary entry point.
;
bootsec		equ $
_start:
		pushfd			; Paranoia... in case of return to PXE
		pushad			; ... save as much state as possible
		push ds
		push es
		push fs
		push gs

		xor ax,ax
		mov ds,ax
		mov es,ax

%ifndef DEPEND
%if TEXT_START != 0x7c00
		; This is uglier than it should be, but works around
		; some NASM 0.98.38 bugs.
		mov di,section..bcopy32.start
		add di,__bcopy_size-4
		lea si,[di-(TEXT_START-7C00h)]
		lea cx,[di-(TEXT_START-4)]
		shr cx,2
		std			; Overlapping areas, copy backwards
		rep movsd
%endif
%endif
		jmp 0:_start1		; Canonicalize address
_start1:
		mov bp,sp
		les bx,[bp+48]		; ES:BX -> !PXE or PXENV+ structure

		; That is all pushed onto the PXE stack.  Save the pointer
		; to it and switch to an internal stack.
		mov [InitStack],sp
		mov [InitStack+2],ss

%if USE_PXE_PROVIDED_STACK
		; Apparently some platforms go bonkers if we
		; set up our own stack...
		mov [BaseStack],sp
		mov [BaseStack+4],ss
%endif

		cli			; Paranoia
		lss esp,[BaseStack]

		sti			; Stack set up and ready
		cld			; Copy upwards

;
; Initialize screen (if we're using one)
;
		; Now set up screen parameters
		call adjust_screen

		; Wipe the F-key area
		mov al,NULLFILE
		mov di,FKeyName
		mov cx,10*(1 << FILENAME_MAX_LG2)
		push es			; Save ES -> PXE structure
		push ds			; ES <- DS
		pop es
		rep stosb
		pop es			; Restore ES

;
; Tell the user we got this far
;
		mov si,syslinux_banner
		call writestr

		mov si,copyright_str
		call writestr

;
; Assume API version 2.1, in case we find the !PXE structure without
; finding the PXENV+ structure.  This should really look at the Base
; Code ROM ID structure in have_pxe, but this is adequate for now --
; if we have !PXE, we have to be 2.1 or higher, and we don't care
; about higher versions than that.
;
		mov word [APIVer],0201h

;
; Now we need to find the !PXE structure.  It's *supposed* to be pointed
; to by SS:[SP+4], but support INT 1Ah, AX=5650h method as well.
; FIX: ES:BX should point to the PXENV+ structure on entry as well.
; We should make that the second test, and not trash ES:BX...
;
		cmp dword [es:bx], '!PXE'
		je have_pxe

		; Uh-oh, not there... try plan B
		mov ax, 5650h
%if USE_PXE_PROVIDED_STACK == 0
		lss sp,[InitStack]
%endif
		int 1Ah					; May trash regs
%if USE_PXE_PROVIDED_STACK == 0
		lss esp,[BaseStack]
%endif

		jc no_pxe
		cmp ax,564Eh
		jne no_pxe

		; Okay, that gave us the PXENV+ structure, find !PXE
		; structure from that (if available)
		cmp dword [es:bx], 'PXEN'
		jne no_pxe
		cmp word [es:bx+4], 'V+'
		je have_pxenv

		; Nothing there either.  Last-ditch: scan memory
		call memory_scan_for_pxe_struct		; !PXE scan
		jnc have_pxe
		call memory_scan_for_pxenv_struct	; PXENV+ scan
		jnc have_pxenv

no_pxe:		mov si,err_nopxe
		call writestr
		jmp kaboom

have_pxenv:
		mov [StrucPtr],bx
		mov [StrucPtr+2],es

		mov si,found_pxenv
		call writestr

		mov si,apiver_str
		call writestr
		mov ax,[es:bx+6]
		mov [APIVer],ax
		call writehex4
		call crlf

		cmp ax,0201h			; API version 2.1 or higher
		jb old_api
		mov si,bx
		mov ax,es
		les bx,[es:bx+28h]		; !PXE structure pointer
		cmp dword [es:bx],'!PXE'
		je have_pxe

		; Nope, !PXE structure missing despite API 2.1+, or at least
		; the pointer is missing.  Do a last-ditch attempt to find it.
		call memory_scan_for_pxe_struct
		jnc have_pxe

		; Otherwise, no dice, use PXENV+ structure
		mov bx,si
		mov es,ax

old_api:	; Need to use a PXENV+ structure
		mov si,using_pxenv_msg
		call writestr

		mov eax,[es:bx+0Ah]		; PXE RM API
		mov [PXENVEntry],eax

		mov si,undi_data_msg
		call writestr
		mov ax,[es:bx+20h]
		call writehex4
		call crlf
		mov si,undi_data_len_msg
		call writestr
		mov ax,[es:bx+22h]
		call writehex4
		call crlf
		mov si,undi_code_msg
		call writestr
		mov ax,[es:bx+24h]
		call writehex4
		call crlf
		mov si,undi_code_len_msg
		call writestr
		mov ax,[es:bx+26h]
		call writehex4
		call crlf

		; Compute base memory size from PXENV+ structure
		xor esi,esi
		movzx eax,word [es:bx+20h]	; UNDI data seg
		cmp ax,[es:bx+24h]		; UNDI code seg
		ja .use_data
		mov ax,[es:bx+24h]
		mov si,[es:bx+26h]
		jmp short .combine
.use_data:
		mov si,[es:bx+22h]
.combine:
		shl eax,4
		add eax,esi
		shr eax,10			; Convert to kilobytes
		mov [RealBaseMem],ax

		mov si,pxenventry_msg
		call writestr
		mov ax,[PXENVEntry+2]
		call writehex4
		mov al,':'
		call writechr
		mov ax,[PXENVEntry]
		call writehex4
		call crlf
		jmp have_entrypoint

have_pxe:
		mov [StrucPtr],bx
		mov [StrucPtr+2],es

		mov eax,[es:bx+10h]
		mov [PXEEntry],eax

		mov si,undi_data_msg
		call writestr
		mov eax,[es:bx+2Ah]
		call writehex8
		call crlf
		mov si,undi_data_len_msg
		call writestr
		mov ax,[es:bx+2Eh]
		call writehex4
		call crlf
		mov si,undi_code_msg
		call writestr
		mov ax,[es:bx+32h]
		call writehex8
		call crlf
		mov si,undi_code_len_msg
		call writestr
		mov ax,[es:bx+36h]
		call writehex4
		call crlf

		; Compute base memory size from !PXE structure
		xor esi,esi
		mov eax,[es:bx+2Ah]
		cmp eax,[es:bx+32h]
		ja .use_data
		mov eax,[es:bx+32h]
		mov si,[es:bx+36h]
		jmp short .combine
.use_data:
		mov si,[es:bx+2Eh]
.combine:
		add eax,esi
		shr eax,10
		mov [RealBaseMem],ax

		mov si,pxeentry_msg
		call writestr
		mov ax,[PXEEntry+2]
		call writehex4
		mov al,':'
		call writechr
		mov ax,[PXEEntry]
		call writehex4
		call crlf

have_entrypoint:
		push cs
		pop es				; Restore CS == DS == ES

;
; Network-specific initialization
;
		xor ax,ax
		mov [LocalDomain],al		; No LocalDomain received

;
; Now attempt to get the BOOTP/DHCP packet that brought us life (and an IP
; address).  This lives in the DHCPACK packet (query info 2).
;
query_bootp:
		mov di,pxe_bootp_query_pkt_2
		mov bx,PXENV_GET_CACHED_INFO

		call pxenv
		push word [pxe_bootp_query_pkt_2.status]
		jc .pxe_err1
		cmp ax,byte 0
		je .pxe_ok
.pxe_err1:
		mov di,pxe_bootp_size_query_pkt
		mov bx,PXENV_GET_CACHED_INFO

		call pxenv
		jc .pxe_err
.pxe_size:
		mov ax,[pxe_bootp_size_query_pkt.buffersize]
		call writehex4
		call crlf

.pxe_err:
		mov si,err_pxefailed
		call writestr
		call writehex4
		mov al, ' '
		call writechr
		pop ax				; Status
		call writehex4
		call crlf
		jmp kaboom			; We're dead

.pxe_ok:
		pop cx				; Forget status
		mov cx,[pxe_bootp_query_pkt_2.buffersize]
		call parse_dhcp			; Parse DHCP packet
;
; Save away MAC address (assume this is in query info 2.  If this
; turns out to be problematic it might be better getting it from
; the query info 1 packet.)
;
.save_mac:
		movzx cx,byte [trackbuf+bootp.hardlen]
		mov [MACLen],cl
		mov al,[trackbuf+bootp.hardware]
		mov [MACType],al
		mov si,trackbuf+bootp.macaddr
		mov di,MAC
		push cx
		rep movsb
		mov cx,MAC+16
		sub cx,di
		xor ax,ax
		rep stosb

		mov si,bootif_str
		mov di,BOOTIFStr
		mov cx,bootif_str_len
		rep movsb

		pop cx
		mov si,MACType
		inc cx
		mov bx,hextbl_lower
.hexify_mac:
		lodsb
		mov ah,al
		shr al,4
		xlatb
		stosb
		mov al,ah
		and al,0Fh
		xlatb
		stosb
		mov al,'-'
		stosb
		loop .hexify_mac
		mov [di-1],byte 0		; Null-terminate and strip final colon

;
; Now, get the boot file and other info.  This lives in the CACHED_REPLY
; packet (query info 3).
;
		mov [pxe_bootp_size_query_pkt.packettype], byte 3

		mov di,pxe_bootp_query_pkt_3
		mov bx,PXENV_GET_CACHED_INFO

		call pxenv
		push word [pxe_bootp_query_pkt_3.status]
		jc .pxe_err1
		cmp ax,byte 0
		jne .pxe_err1

		; Packet loaded OK...
		pop cx				; Forget status
		mov cx,[pxe_bootp_query_pkt_3.buffersize]
		call parse_dhcp			; Parse DHCP packet
;
; Generate ip= option
;
		call genipopt

;
; Print IP address
;
		mov eax,[MyIP]
		mov di,DotQuadBuf
		push di
		call gendotquad			; This takes network byte order input

		xchg ah,al			; Convert to host byte order
		ror eax,16			; (BSWAP doesn't work on 386)
		xchg ah,al

		mov si,myipaddr_msg
		call writestr
		call writehex8
		mov al,' '
		call writechr
		pop si				; DotQuadBuf
		call writestr
		call crlf

		mov si,IPOption
		call writestr
		call crlf

;
; Check to see if we got any PXELINUX-specific DHCP options; in particular,
; if we didn't get the magic enable, do not recognize any other options.
;
check_dhcp_magic:
		test byte [DHCPMagic], 1	; If we didn't get the magic enable...
		jnz .got_magic
		mov byte [DHCPMagic], 0		; If not, kill all other options
.got_magic:


;
; Initialize UDP stack
;
udp_init:
		mov eax,[MyIP]
		mov [pxe_udp_open_pkt.sip],eax
		mov di,pxe_udp_open_pkt
		mov bx,PXENV_UDP_OPEN
		call pxenv
		jc .failed
		cmp word [pxe_udp_open_pkt.status], byte 0
		je .success
.failed:	mov si,err_udpinit
		call writestr
		jmp kaboom
.success:

;
; Common initialization code
;
%include "init.inc"
%include "cpuinit.inc"

;
; Now we're all set to start with our *real* business.	First load the
; configuration file (if any) and parse it.
;
; In previous versions I avoided using 32-bit registers because of a
; rumour some BIOSes clobbered the upper half of 32-bit registers at
; random.  I figure, though, that if there are any of those still left
; they probably won't be trying to install Linux on them...
;
; The code is still ripe with 16-bitisms, though.  Not worth the hassle
; to take'm out.  In fact, we may want to put them back if we're going
; to boot ELKS at some point.
;

;
; Store standard filename prefix
;
prefix:		test byte [DHCPMagic], 04h	; Did we get a path prefix option
		jnz .got_prefix
		mov si,BootFile
		mov di,PathPrefix
		cld
		call strcpy
		mov cx,di
		sub cx,PathPrefix+1
		std
		lea si,[di-2]			; Skip final null!
.find_alnum:	lodsb
		or al,20h
		cmp al,'.'			; Count . or - as alphanum
		je .alnum
		cmp al,'-'
		je .alnum
		cmp al,'0'
		jb .notalnum
		cmp al,'9'
		jbe .alnum
		cmp al,'a'
		jb .notalnum
		cmp al,'z'
		ja .notalnum
.alnum:		loop .find_alnum
		dec si
.notalnum:	mov byte [si+2],0		; Zero-terminate after delimiter
		cld
.got_prefix:
		mov si,tftpprefix_msg
		call writestr
		mov si,PathPrefix
		call writestr
		call crlf

;
; Load configuration file
;
find_config:

;
; Begin looking for configuration file
;
config_scan:
		mov di,ConfigServer
		xor eax,eax
		stosd				; The config file is always from the server

		test byte [DHCPMagic], 02h
		jz .no_option

		; We got a DHCP option, try it first
		mov si,trying_msg
		call writestr
		; mov di,ConfigName		; - already the case
		mov si,di
		call writestr
		call crlf
		mov di,ConfigServer
		call open
		jnz .success

.no_option:
		mov di,ConfigName
		mov si,cfgprefix
		mov cx,cfgprefix_len
		rep movsb

		; Try loading by MAC address
		; Have to guess config file name
		push di
		mov si,MACStr
		mov cx,(3*17+1)/2
		rep movsw
		mov si,trying_msg
		call writestr
		mov di,ConfigName
		mov si,di
		call writestr
		call crlf
		mov di,ConfigServer
		call open
		pop di
		jnz .success

.scan_ip:
		mov cx,8
		mov eax,[MyIP]
		xchg ah,al			; Convert to host byte order
		ror eax,16
		xchg ah,al
.hexify_loop:	rol eax,4
		push eax
		and al,0Fh
		cmp al,10
		jae .high
.low:		add al,'0'
		jmp short .char
.high:		add al,'A'-10
.char:		stosb
		pop eax
		loop .hexify_loop

		mov cx,9			; Up to 9 attempts

.tryagain:	mov byte [di],0
		cmp cx,byte 1
		jne .not_default
		pusha
		mov si,default_str
		mov cx,default_len
		rep movsb			; Copy "default" string
		popa
.not_default:	pusha
		mov si,trying_msg
		call writestr
		mov di,ConfigName
		mov si,di
		call writestr
		call crlf
		mov di,ConfigServer
		call open
		popa
		jnz .success
		dec di
		loop .tryagain

		mov si,err_noconfig
		call writestr
		jmp kaboom

.success:

;
; Now we have the config file open.  Parse the config file and
; run the user interface.
;
%include "ui.inc"

;
; Linux kernel loading code is common.  However, we need to define
; a couple of helper macros...
;

; Handle "ipappend" option
%define HAVE_SPECIAL_APPEND
%macro	SPECIAL_APPEND 0
		test byte [IPAppend],01h	; ip=
		jz .noipappend1
		mov si,IPOption
		mov cx,[IPOptionLen]
		rep movsb
		mov al,' '
		stosb
.noipappend1:
		test byte [IPAppend],02h
		jz .noipappend2
		mov si,BOOTIFStr
		call strcpy
		mov byte [es:di-1],' '		; Replace null with space
.noipappend2:
%endmacro

; Unload PXE stack
%define HAVE_UNLOAD_PREP
%macro	UNLOAD_PREP 0
		call unload_pxe
%endmacro

%include "runkernel.inc"

;
; COMBOOT-loading code
;
%include "comboot.inc"
%include "com32.inc"
%include "cmdline.inc"

;
; Boot sector loading code
;
%include "bootsect.inc"

;
; Boot to the local disk by returning the appropriate PXE magic.
; AX contains the appropriate return code.
;
local_boot:
		push cs
		pop ds
		mov [LocalBootType],ax
		call vgaclearmode
		mov si,localboot_msg
		call writestr
		; Restore the environment we were called with
		lss sp,[InitStack]
		pop gs
		pop fs
		pop es
		pop ds
		popad
		mov ax,[cs:LocalBootType]
		popfd
		retf				; Return to PXE

;
; Abort loading code
;
%include "abort.inc"

;
; kaboom: write a message and bail out.  Wait for quite a while,
;	  or a user keypress, then do a hard reboot.
;
kaboom:
		RESET_STACK_AND_SEGS AX
.patch:		mov si,bailmsg
		call writestr		; Returns with AL = 0
.drain:		call pollchar
		jz .drained
		call getchar
		jmp short .drain
.drained:
		mov edi,[RebootTime]
		mov al,[DHCPMagic]
		and al,09h		; Magic+Timeout
		cmp al,09h
		je .time_set
		mov edi,REBOOT_TIME
.time_set:
		mov cx,18
.wait1:		push cx
		mov ecx,edi
.wait2:		mov dx,[BIOS_timer]
.wait3:		call pollchar
		jnz .keypress
		cmp dx,[BIOS_timer]
		je .wait3
		loop .wait2,ecx
		mov al,'.'
		call writechr
		pop cx
		loop .wait1
.keypress:
		call crlf
		mov word [BIOS_magic],0	; Cold reboot
		jmp 0F000h:0FFF0h	; Reset vector address

;
; memory_scan_for_pxe_struct:
;
;	If none of the standard methods find the !PXE structure, look for it
;	by scanning memory.
;
;	On exit, if found:
;		CF = 0, ES:BX -> !PXE structure
;	Otherwise CF = 1, all registers saved
;
memory_scan_for_pxe_struct:
		push ds
		pusha
		mov ax,cs
		mov ds,ax
		mov si,trymempxe_msg
		call writestr
		mov ax,[BIOS_fbm]	; Starting segment
		shl ax,(10-4)		; Kilobytes -> paragraphs
;		mov ax,01000h		; Start to look here
		dec ax			; To skip inc ax
.mismatch:
		inc ax
		cmp ax,0A000h		; End of memory
		jae .not_found
		call writehex4
		mov si,fourbs_msg
		call writestr
		mov es,ax
		mov edx,[es:0]
		cmp edx,'!PXE'
		jne .mismatch
		movzx cx,byte [es:4]	; Length of structure
		cmp cl,08h		; Minimum length
		jb .mismatch
		push ax
		xor ax,ax
		xor si,si
.checksum:	es lodsb
		add ah,al
		loop .checksum
		pop ax
		jnz .mismatch		; Checksum must == 0
.found:		mov bp,sp
		xor bx,bx
		mov [bp+8],bx		; Save BX into stack frame (will be == 0)
		mov ax,es
		call writehex4
		call crlf
		popa
		pop ds
		clc
		ret
.not_found:	mov si,notfound_msg
		call writestr
		popa
		pop ds
		stc
		ret

;
; memory_scan_for_pxenv_struct:
;
;	If none of the standard methods find the PXENV+ structure, look for it
;	by scanning memory.
;
;	On exit, if found:
;		CF = 0, ES:BX -> PXENV+ structure
;	Otherwise CF = 1, all registers saved
;
memory_scan_for_pxenv_struct:
		pusha
		mov si,trymempxenv_msg
		call writestr
;		mov ax,[BIOS_fbm]	; Starting segment
;		shl ax,(10-4)		; Kilobytes -> paragraphs
		mov ax,01000h		; Start to look here
		dec ax			; To skip inc ax
.mismatch:
		inc ax
		cmp ax,0A000h		; End of memory
		jae .not_found
		mov es,ax
		mov edx,[es:0]
		cmp edx,'PXEN'
		jne .mismatch
		mov dx,[es:4]
		cmp dx,'V+'
		jne .mismatch
		movzx cx,byte [es:8]	; Length of structure
		cmp cl,26h		; Minimum length
		jb .mismatch
		xor ax,ax
		xor si,si
.checksum:	es lodsb
		add ah,al
		loop .checksum
		and ah,ah
		jnz .mismatch		; Checksum must == 0
.found:		mov bp,sp
		mov [bp+8],bx		; Save BX into stack frame
		mov ax,bx
		call writehex4
		call crlf
		clc
		ret
.not_found:	mov si,notfound_msg
		call writestr
		popad
		stc
		ret

;
; searchdir:
;
;	Open a TFTP connection to the server
;
;	     On entry:
;		DS:DI	= mangled filename
;	     If successful:
;		ZF clear
;		SI	= socket pointer
;		DX:AX	= file length in bytes
;	     If unsuccessful
;		ZF set
;

searchdir:
		push es
		push bx
		push cx
		mov ax,ds
		mov es,ax
		mov si,di
		push bp
		mov bp,sp

		call allocate_socket
		jz .ret

		mov ax,PKT_RETRY	; Retry counter
		mov word [PktTimeout],PKT_TIMEOUT	; Initial timeout

.sendreq:	push ax			; [bp-2]  - Retry counter
		push si			; [bp-4]  - File name

		mov di,packet_buf
		mov [pxe_udp_write_pkt.buffer],di

		mov ax,TFTP_RRQ		; TFTP opcode
		stosw

		lodsd			; EAX <- server override (if any)
		and eax,eax
		jnz .noprefix		; No prefix, and we have the server

		push si			; Add common prefix
		mov si,PathPrefix
		call strcpy
		dec di
		pop si

		mov eax,[ServerIP]	; Get default server

.noprefix:
		call strcpy		; Filename

		mov [bx+tftp_remoteip],eax

		push bx			; [bp-6]  - TFTP block
		mov bx,[bx]
		push bx			; [bp-8]  - TID (local port no)

		mov [pxe_udp_write_pkt.status],byte 0
		mov [pxe_udp_write_pkt.sip],eax
		; Now figure out the gateway
		xor eax,[MyIP]
		and eax,[Netmask]
		jz .nogwneeded
		mov eax,[Gateway]
.nogwneeded:
		mov [pxe_udp_write_pkt.gip],eax
		mov [pxe_udp_write_pkt.lport],bx
		mov ax,[ServerPort]
		mov [pxe_udp_write_pkt.rport],ax
		mov si,tftp_tail
		mov cx,tftp_tail_len
		rep movsb
		sub di,packet_buf	; Get packet size
		mov [pxe_udp_write_pkt.buffersize],di

		mov di,pxe_udp_write_pkt
		mov bx,PXENV_UDP_WRITE
		call pxenv
		jc .failure
		cmp word [pxe_udp_write_pkt.status],byte 0
		jne .failure

		;
		; Danger, Will Robinson!  We need to support timeout
		; and retry lest we just lost a packet...
		;

		; Packet transmitted OK, now we need to receive
.getpacket:	push word [PktTimeout]	; [bp-10]
		push word [BIOS_timer]	; [bp-12]

.pkt_loop:	mov bx,[bp-8]		; TID
		mov di,packet_buf
		mov word [pxe_udp_read_pkt.status],0
		mov [pxe_udp_read_pkt.buffer],di
		mov [pxe_udp_read_pkt.buffer+2],ds
		mov word [pxe_udp_read_pkt.buffersize],packet_buf_size
		mov eax,[MyIP]
		mov [pxe_udp_read_pkt.dip],eax
		mov [pxe_udp_read_pkt.lport],bx
		mov di,pxe_udp_read_pkt
		mov bx,PXENV_UDP_READ
		call pxenv
		and ax,ax
		jz .got_packet			; Wait for packet
.no_packet:
		mov dx,[BIOS_timer]
		cmp dx,[bp-12]
		je .pkt_loop
		mov [bp-12],dx
		dec word [bp-10]		; Timeout
		jnz .pkt_loop
		pop ax	; Adjust stack
		pop ax
		shl word [PktTimeout],1		; Exponential backoff
		jmp .failure

.got_packet:
		mov si,[bp-6]			; TFTP pointer
		mov bx,[bp-8]			; TID

		mov eax,[si+tftp_remoteip]
		cmp [pxe_udp_read_pkt.sip],eax	; This is technically not to the TFTP spec?
		jne .no_packet

		; Got packet - reset timeout
		mov word [PktTimeout],PKT_TIMEOUT

		pop ax	; Adjust stack
		pop ax

		mov ax,[pxe_udp_read_pkt.rport]
		mov [si+tftp_remoteport],ax

		; filesize <- -1 == unknown
		mov dword [si+tftp_filesize], -1
		; Default blksize unless blksize option negotiated
		mov word [si+tftp_blksize], TFTP_BLOCKSIZE

		mov cx,[pxe_udp_read_pkt.buffersize]
		sub cx,2		; CX <- bytes after opcode
		jb .failure		; Garbled reply

		mov si,packet_buf
		lodsw

		cmp ax, TFTP_ERROR
		je .bailnow		; ERROR reply: don't try again

		cmp ax, TFTP_OACK
		jne .no_tsize

		; Now we need to parse the OACK packet to get the transfer
		; size.  SI -> first byte of options; CX -> byte count
.parse_oack:
		jcxz .no_tsize			; No options acked
.get_opt_name:
		mov di,si
		mov bx,si
.opt_name_loop:	lodsb
		and al,al
		jz .got_opt_name
		or al,20h			; Convert to lowercase
		stosb
		loop .opt_name_loop
		; We ran out, and no final null
		jmp .err_reply
.got_opt_name:	; si -> option value
		dec cx				; bytes left in pkt
		jz .err_reply			; Option w/o value

		; Parse option pointed to by bx; guaranteed to be
		; null-terminated.
		push cx
		push si
		mov si,bx			; -> option name
		mov bx,tftp_opt_table
		mov cx,tftp_opts
.opt_loop:
		push cx
		push si
		mov di,[bx]			; Option pointer
		mov cx,[bx+2]			; Option len
		repe cmpsb
		pop si
		pop cx
		je .get_value			; OK, known option
		add bx,6
		loop .opt_loop

		pop si
		pop cx
		jmp .err_reply			; Non-negotiated option returned

.get_value:	pop si				; si -> option value
		pop cx				; cx -> bytes left in pkt
		mov bx,[bx+4]			; Pointer to data target
		add bx,[bp-6]			; TFTP socket pointer
		xor eax,eax
		xor edx,edx
.value_loop:	lodsb
		and al,al
		jz .got_value
		sub al,'0'
		cmp al, 9
		ja .err_reply			; Not a decimal digit
		imul edx,10
		add edx,eax
		mov [bx],edx
		loop .value_loop
		; Ran out before final null, accept anyway
		jmp short .done_pkt

.got_value:
		dec cx
		jnz .get_opt_name		; Not end of packet

		; ZF == 1

		; Success, done!
.done_pkt:
		pop si			; Junk
		pop si			; We want the packet ptr in SI

		mov eax,[si+tftp_filesize]
		cmp eax,-1
		jz .no_tsize
		mov edx,eax
		shr edx,16		; DX:AX == EAX

		and eax,eax		; Set ZF depending on file size
		pop bp			; Junk
		pop bp			; Junk (retry counter)
		jz .error_si		; ZF = 1 need to free the socket
.ret:
		pop bp
		pop cx
		pop bx
		pop es
		ret

.no_tsize:
.err_reply:	; Option negotiation error.  Send ERROR reply.
		; ServerIP and gateway are already programmed in
		mov si,[bp-6]
		mov ax,[si+tftp_remoteport]
		mov word [pxe_udp_write_pkt.rport],ax
		mov word [pxe_udp_write_pkt.buffer],tftp_opt_err
		mov word [pxe_udp_write_pkt.buffersize],tftp_opt_err_len
		mov di,pxe_udp_write_pkt
		mov bx,PXENV_UDP_WRITE
		call pxenv

		; Write an error message and explode
		mov si,err_oldtftp
		call writestr
		jmp kaboom

.bailnow:	mov word [bp-2],1	; Immediate error - no retry

.failure:	pop bx			; Junk
		pop bx
		pop si
		pop ax
		dec ax			; Retry counter
		jnz .sendreq		; Try again

.error:		mov si,bx		; Socket pointer
.error_si:				; Socket pointer already in SI
		call free_socket	; ZF <- 1, SI <- 0
		jmp .ret

;
; allocate_socket: Allocate a local UDP port structure
;
;		If successful:
;		  ZF set
;		  BX     = socket pointer
;               If unsuccessful:
;                 ZF clear
;
allocate_socket:
		push cx
		mov bx,Files
		mov cx,MAX_OPEN
.check:		cmp word [bx], byte 0
		je .found
		add bx,open_file_t_size
		loop .check
		xor cx,cx			; ZF = 1
		pop cx
		ret
		; Allocate a socket number.  Socket numbers are made
		; guaranteed unique by including the socket slot number
		; (inverted, because we use the loop counter cx); add a
		; counter value to keep the numbers from being likely to
		; get immediately reused.
		;
		; The NextSocket variable also contains the top two bits
		; set.  This generates a value in the range 49152 to
		; 57343.
.found:
		dec cx
		push ax
		mov ax,[NextSocket]
		inc ax
		and ax,((1 << (13-MAX_OPEN_LG2))-1) | 0xC000
		mov [NextSocket],ax
		shl cx,13-MAX_OPEN_LG2
		add cx,ax			; ZF = 0
		xchg ch,cl			; Convert to network byte order
		mov [bx],cx			; Socket in use
		pop ax
		pop cx
		ret

;
; Free socket: socket in SI; return SI = 0, ZF = 1 for convenience
;
free_socket:
		push es
		pusha
		xor ax,ax
		mov es,ax
		mov di,si
		mov cx,tftp_pktbuf >> 1		; tftp_pktbuf is not cleared
		rep stosw
		popa
		pop es
		xor si,si
		ret

;
; parse_dotquad:
;	       Read a dot-quad pathname in DS:SI and output an IP
;	       address in EAX, with SI pointing to the first
;	       nonmatching character.
;
;	       Return CF=1 on error.
;
parse_dotquad:
		push cx
		mov cx,4
		xor eax,eax
.parseloop:
		mov ch,ah
		mov ah,al
		lodsb
		sub al,'0'
		jb .notnumeric
		cmp al,9
		ja .notnumeric
		aad				; AL += 10 * AH; AH = 0;
		xchg ah,ch
		jmp .parseloop
.notnumeric:
		cmp al,'.'-'0'
		pushf
		mov al,ah
		mov ah,ch
		xor ch,ch
		ror eax,8
		popf
		jne .error
		loop .parseloop
		jmp .done
.error:
		loop .realerror			; If CX := 1 then we're done
		clc
		jmp .done
.realerror:
		stc
.done:
		dec si				; CF unchanged!
		pop cx
		ret
;
; mangle_name: Mangle a filename pointed to by DS:SI into a buffer pointed
;	       to by ES:DI; ends on encountering any whitespace.
;
;	       This verifies that a filename is < FILENAME_MAX characters
;	       and doesn't contain whitespace, and zero-pads the output buffer,
;	       so "repe cmpsb" can do a compare.
;
;	       The first four bytes of the manged name is the IP address of
;	       the download host.
;
mangle_name:
		push si
		mov eax,[ServerIP]
		cmp byte [si],0
		je .noip			; Null filename?!?!
		cmp word [si],'::'		; Leading ::?
		je .gotprefix

.more:
		inc si
		cmp byte [si],0
		je .noip
		cmp word [si],'::'
		jne .more

		; We have a :: prefix of some sort, it could be either
		; a DNS name or a dot-quad IP address.  Try the dot-quad
		; first...
.here:
		pop si
		push si
		call parse_dotquad
		jc .notdq
		cmp word [si],'::'
		je .gotprefix
.notdq:
		pop si
		push si
		call dns_resolv
		cmp word [si],'::'
		jne .noip
		and eax,eax
		jnz .gotprefix

.noip:
		pop si
		xor eax,eax
		jmp .prefix_done

.gotprefix:
		pop cx				; Adjust stack
		inc si				; Skip double colon
		inc si

.prefix_done:
		stosd				; Save IP address prefix
		mov cx,FILENAME_MAX-5

.mn_loop:
		lodsb
		cmp al,' '			; If control or space, end
		jna .mn_end
		stosb
		loop .mn_loop
.mn_end:
		inc cx				; At least one null byte
		xor ax,ax			; Zero-fill name
		rep stosb			; Doesn't do anything if CX=0
		ret				; Done

;
; unmangle_name: Does the opposite of mangle_name; converts a DOS-mangled
;                filename to the conventional representation.  This is needed
;                for the BOOT_IMAGE= parameter for the kernel.
;                NOTE: A 13-byte buffer is mandatory, even if the string is
;                known to be shorter.
;
;                DS:SI -> input mangled file name
;                ES:DI -> output buffer
;
;                On return, DI points to the first byte after the output name,
;                which is set to a null byte.
;
unmangle_name:
		push eax
		lodsd
		and eax,eax
		jz .noip
		call gendotquad
		mov ax,'::'
		stosw
.noip:
		call strcpy
		dec di				; Point to final null byte
		pop eax
		ret

;
; pxenv
;
; This is the main PXENV+/!PXE entry point, using the PXENV+
; calling convention.  This is a separate local routine so
; we can hook special things from it if necessary.  In particular,
; some PXE stacks seem to not like being invoked from anything but
; the initial stack, so humour it.
;

pxenv:
%if USE_PXE_PROVIDED_STACK == 0
		mov [cs:PXEStack],sp
		mov [cs:PXEStack+2],ss
		lss sp,[cs:InitStack]
%endif
.jump:		call 0:pxe_thunk		; Default to calling the thunk
%if USE_PXE_PROVIDED_STACK == 0
		lss sp,[cs:PXEStack]
%endif
		cld				; Make sure DF <- 0
		ret

; Must be after function def due to NASM bug
PXENVEntry	equ pxenv.jump+1

;
; pxe_thunk
;
; Convert from the PXENV+ calling convention (BX, ES, DI) to the !PXE
; calling convention (using the stack.)
;
; This is called as a far routine so that we can just stick it into
; the PXENVEntry variable.
;
pxe_thunk:	push es
		push di
		push bx
.jump:		call 0:0
		add sp,byte 6
		cmp ax,byte 1
		cmc				; Set CF unless ax == 0
		retf

; Must be after function def due to NASM bug
PXEEntry	equ pxe_thunk.jump+1

;
; getfssec: Get multiple clusters from a file, given the starting cluster.
;
;	In this case, get multiple blocks from a specific TCP connection.
;
;  On entry:
;	ES:BX	-> Buffer
;	SI	-> TFTP socket pointer
;	CX	-> 512-byte block count; 0FFFFh = until end of file
;  On exit:
;	SI	-> TFTP socket pointer (or 0 on EOF)
;	CF = 1	-> Hit EOF
;
getfssec:	push si
		push fs
		mov di,bx
		mov bx,si
		mov ax,pktbuf_seg
		mov fs,ax

		movzx ecx,cx
		shl ecx,TFTP_BLOCKSIZE_LG2	; Convert to bytes
		jz .hit_eof			; Nothing to do?

.need_more:
		push ecx

		movzx eax,word [bx+tftp_bytesleft]
		cmp ecx,eax
		jna .ok_size
		mov ecx,eax
		jcxz .need_packet		; No bytes available?
.ok_size:

		mov ax,cx			; EAX<31:16> == ECX<31:16> == 0
		mov si,[bx+tftp_dataptr]
		sub [bx+tftp_bytesleft],cx
		fs rep movsb			; Copy from packet buffer
		mov [bx+tftp_dataptr],si

		pop ecx
		sub ecx,eax
		jnz .need_more


.hit_eof:
		pop fs
		pop si

		; Is there anything left of this?
		mov eax,[si+tftp_filesize]
		sub eax,[si+tftp_filepos]
		jnz .bytes_left	; CF <- 0

		cmp [si+tftp_bytesleft],ax
		jnz .bytes_left	; CF <- 0

		; The socket is closed and the buffer drained
		; Close socket structure and re-init for next user
		call free_socket
		stc
.bytes_left:
		ret

;
; No data in buffer, check to see if we can get a packet...
;
.need_packet:
		pop ecx
		mov eax,[bx+tftp_filesize]
		cmp eax,[bx+tftp_filepos]
		je .hit_eof			; Already EOF'd; socket already closed

		pushad
		push es
		mov si,bx
		call get_packet
		pop es
		popad

		jmp .need_more

;
; Get a fresh packet; expects fs -> pktbuf_seg and ds:si -> socket structure
;
get_packet:
		mov ax,ds
		mov es,ax

.packet_loop:
		; Start by ACKing the previous packet; this should cause the
		; next packet to be sent.
		mov cx,PKT_RETRY
		mov word [PktTimeout],PKT_TIMEOUT

.send_ack:	push cx				; <D> Retry count

		mov ax,[si+tftp_lastpkt]
		call ack_packet			; Send ACK

		; We used to test the error code here, but sometimes
		; PXE would return negative status even though we really
		; did send the ACK.  Now, just treat a failed send as
		; a normally lost packet, and let it time out in due
		; course of events.

.send_ok:	; Now wait for packet.
		mov dx,[BIOS_timer]		; Get current time

		mov cx,[PktTimeout]
.wait_data:	push cx				; <E> Timeout
		push dx				; <F> Old time

		mov bx,[si+tftp_pktbuf]
		mov [pxe_udp_read_pkt.buffer],bx
		mov [pxe_udp_read_pkt.buffer+2],fs
		mov [pxe_udp_read_pkt.buffersize],word PKTBUF_SIZE
		mov eax,[si+tftp_remoteip]
		mov [pxe_udp_read_pkt.sip],eax
		mov eax,[MyIP]
		mov [pxe_udp_read_pkt.dip],eax
		mov ax,[si+tftp_remoteport]
		mov [pxe_udp_read_pkt.rport],ax
		mov ax,[si+tftp_localport]
		mov [pxe_udp_read_pkt.lport],ax
		mov di,pxe_udp_read_pkt
		mov bx,PXENV_UDP_READ
		push si				; <G>
		call pxenv
		pop si				; <G>
		and ax,ax
		jz .recv_ok

		; No packet, or receive failure
		mov dx,[BIOS_timer]
		pop ax				; <F> Old time
		pop cx				; <E> Timeout
		cmp ax,dx			; Same time -> don't advance timeout
		je .wait_data			; Same clock tick
		loop .wait_data			; Decrease timeout

		pop cx				; <D> Didn't get any, send another ACK
		shl word [PktTimeout],1		; Exponential backoff
		loop .send_ack
		jmp kaboom			; Forget it...

.recv_ok:	pop dx				; <F>
		pop cx				; <E>

		cmp word [pxe_udp_read_pkt.buffersize],byte 4
		jb .wait_data			; Bad size for a DATA packet

		mov bx,[si+tftp_pktbuf]
		cmp word [fs:bx],TFTP_DATA	; Not a data packet?
		jne .wait_data			; Then wait for something else

		mov ax,[si+tftp_lastpkt]
		xchg ah,al			; Host byte order
		inc ax				; Which packet are we waiting for?
		xchg ah,al			; Network byte order
		cmp [fs:bx+2],ax
		je .right_packet

		; Wrong packet, ACK the packet and then try again
		; This is presumably because the ACK got lost,
		; so the server just resent the previous packet
		mov ax,[fs:bx+2]
		call ack_packet
		jmp .send_ok			; Reset timeout

.right_packet:	; It's the packet we want.  We're also EOF if the size < blocksize

		pop cx				; <D> Don't need the retry count anymore

		mov [si+tftp_lastpkt],ax	; Update last packet number

		movzx ecx,word [pxe_udp_read_pkt.buffersize]
		sub cx,byte 4			; Skip TFTP header

		; If this is a zero-length block, don't mess with the pointers,
		; since we may have just set up the previous block that way
		jz .last_block

		; Set pointer to data block
		lea ax,[bx+4]			; Data past TFTP header
		mov [si+tftp_dataptr],ax

		add [si+tftp_filepos],ecx
		mov [si+tftp_bytesleft],cx

		cmp cx,[si+tftp_blksize]	; Is it a full block?
		jb .last_block			; If so, it's not EOF

		; If we had the exact right number of bytes, always get
		; one more packet to get the (zero-byte) EOF packet and
		; close the socket.
		mov eax,[si+tftp_filepos]
		cmp [si+tftp_filesize],eax
		je .packet_loop

		ret


.last_block:	; Last block - ACK packet immediately
		mov ax,[fs:bx+2]
		call ack_packet

		; Make sure we know we are at end of file
		mov eax,[si+tftp_filepos]
		mov [si+tftp_filesize],eax

		ret

;
; ack_packet:
;
; Send ACK packet.  This is a common operation and so is worth canning.
;
; Entry:
;	SI 	= TFTP block
;	AX 	= Packet # to ack (network byte order)
; Exit:
;	ZF = 0 -> Error
;	All registers preserved
;
; This function uses the pxe_udp_write_pkt but not the packet_buf.
;
ack_packet:
		pushad
		mov [ack_packet_buf+2],ax	; Packet number to ack
		mov ax,[si]
		mov [pxe_udp_write_pkt.lport],ax
		mov ax,[si+tftp_remoteport]
		mov [pxe_udp_write_pkt.rport],ax
		mov eax,[si+tftp_remoteip]
		mov [pxe_udp_write_pkt.sip],eax
		xor eax,[MyIP]
		and eax,[Netmask]
		jz .nogw
		mov eax,[Gateway]
.nogw:
		mov [pxe_udp_write_pkt.gip],eax
		mov [pxe_udp_write_pkt.buffer],word ack_packet_buf
		mov [pxe_udp_write_pkt.buffersize], word 4
		mov di,pxe_udp_write_pkt
		mov bx,PXENV_UDP_WRITE
		call pxenv
		cmp ax,byte 0			; ZF = 1 if write OK
		popad
		ret

;
; unload_pxe:
;
; This function unloads the PXE and UNDI stacks and unclaims
; the memory.
;
unload_pxe:
		test byte [KeepPXE],01h		; Should we keep PXE around?
		jnz reset_pxe

		push ds
		push es

		mov ax,cs
		mov ds,ax
		mov es,ax

		mov si,new_api_unload
		cmp byte [APIVer+1],2		; Major API version >= 2?
		jae .new_api
		mov si,old_api_unload
.new_api:

.call_loop:	xor ax,ax
		lodsb
		and ax,ax
		jz .call_done
		xchg bx,ax
		mov di,pxe_unload_stack_pkt
		push di
		xor ax,ax
		mov cx,pxe_unload_stack_pkt_len >> 1
		rep stosw
		pop di
		call pxenv
		jc .cant_free
		mov ax,word [pxe_unload_stack_pkt.status]
		cmp ax,PXENV_STATUS_SUCCESS
		jne .cant_free
		jmp .call_loop

.call_done:
		mov bx,0FF00h

		mov dx,[RealBaseMem]
		cmp dx,[BIOS_fbm]		; Sanity check
		jna .cant_free
		inc bx

		; Check that PXE actually unhooked the INT 1Ah chain
		movzx eax,word [4*0x1a]
		movzx ecx,word [4*0x1a+2]
		shl ecx,4
		add eax,ecx
		shr eax,10
		cmp ax,dx			; Not in range
		jae .ok
		cmp ax,[BIOS_fbm]
		jae .cant_free
		; inc bx

.ok:
		mov [BIOS_fbm],dx
.pop_ret:
		pop es
		pop ds
		ret

.cant_free:
		mov si,cant_free_msg
		call writestr
		push ax
		xchg bx,ax
		call writehex4
		mov al,'-'
		call writechr
		pop ax
		call writehex4
		mov al,'-'
		call writechr
		mov eax,[4*0x1a]
		call writehex8
		call crlf
		jmp .pop_ret

		; We want to keep PXE around, but still we should reset
		; it to the standard bootup configuration
reset_pxe:
		push es
		push cs
		pop es
		mov bx,PXENV_UDP_CLOSE
		mov di,pxe_udp_close_pkt
		call pxenv
		pop es
		ret

;
; gendotquad
;
; Take an IP address (in network byte order) in EAX and
; output a dotted quad string to ES:DI.
; DI points to terminal null at end of string on exit.
;
gendotquad:
		push eax
		push cx
		mov cx,4
.genchar:
		push eax
		cmp al,10		; < 10?
		jb .lt10		; If so, skip first 2 digits

		cmp al,100		; < 100
		jb .lt100		; If so, skip first digit

		aam 100
		; Now AH = 100-digit; AL = remainder
		add ah,'0'
		mov [es:di],ah
		inc di

.lt100:
		aam 10
		; Now AH = 10-digit; AL = remainder
		add ah,'0'
		mov [es:di],ah
		inc di

.lt10:
		add al,'0'
		stosb
		mov al,'.'
		stosb
		pop eax
		ror eax,8	; Move next char into LSB
		loop .genchar
		dec di
		mov [es:di], byte 0
		pop cx
		pop eax
		ret

;
; parse_dhcp
;
; Parse a DHCP packet.  This includes dealing with "overloaded"
; option fields (see RFC 2132, section 9.3)
;
; This should fill in the following global variables, if the
; information is present:
;
; MyIP		- client IP address
; ServerIP	- boot server IP address
; Netmask	- network mask
; Gateway	- default gateway router IP
; BootFile	- boot file name
; DNSServers	- DNS server IPs
; LocalDomain	- Local domain name
;
; This assumes the DHCP packet is in "trackbuf" and the length
; of the packet in in CX on entry.
;

parse_dhcp:
		mov byte [OverLoad],0		; Assume no overload
		mov eax, [trackbuf+bootp.yip]
		and eax, eax
		jz .noyip
		cmp al,224			; Class D or higher -> bad
		jae .noyip
		mov [MyIP], eax
.noyip:
		mov eax, [trackbuf+bootp.sip]
		and eax, eax
		jz .nosip
		cmp al,224			; Class D or higher -> bad
		jae .nosip
		mov [ServerIP], eax
.nosip:
		sub cx, bootp.options
		jbe .nooptions
		mov si, trackbuf+bootp.option_magic
		lodsd
		cmp eax, BOOTP_OPTION_MAGIC
		jne .nooptions
		call parse_dhcp_options
.nooptions:
		mov si, trackbuf+bootp.bootfile
		test byte [OverLoad],1
		jz .nofileoverload
		mov cx,128
		call parse_dhcp_options
		jmp short .parsed_file
.nofileoverload:
		cmp byte [si], 0
		jz .parsed_file			; No bootfile name
		mov di,BootFile
		mov cx,32
		rep movsd
		xor al,al
		stosb				; Null-terminate
.parsed_file:
		mov si, trackbuf+bootp.sname
		test byte [OverLoad],2
		jz .nosnameoverload
		mov cx,64
		call parse_dhcp_options
.nosnameoverload:
		ret

;
; Parse a sequence of DHCP options, pointed to by DS:SI; the field
; size is CX -- some DHCP servers leave option fields unterminated
; in violation of the spec.
;
; For parse_some_dhcp_options, DH contains the minimum value for
; the option to recognize -- this is used to restrict parsing to
; PXELINUX-specific options only.
;
parse_dhcp_options:
		xor dx,dx

parse_some_dhcp_options:
.loop:
		and cx,cx
		jz .done

		lodsb
		dec cx
		jz .done	; Last byte; must be PAD, END or malformed
		cmp al, 0	; PAD option
		je .loop
		cmp al,255	; END option
		je .done

		; Anything else will have a length field
		mov dl,al	; DL <- option number
		xor ax,ax
		lodsb		; AX <- option length
		dec cx
		sub cx,ax	; Decrement bytes left counter
		jb .done	; Malformed option: length > field size

		cmp dl,dh	; Is the option value valid?
		jb .opt_done

		cmp dl,1	; SUBNET MASK option
		jne .not_subnet
		mov ebx,[si]
		mov [Netmask],ebx
		jmp .opt_done
.not_subnet:

		cmp dl,3	; ROUTER option
		jne .not_router
		mov ebx,[si]
		mov [Gateway],ebx
		jmp .opt_done
.not_router:

		cmp dl,6	; DNS SERVERS option
		jne .not_dns
		pusha
		mov cx,ax
		shr cx,2
		cmp cl,DNS_MAX_SERVERS
		jna .oklen
		mov cl,DNS_MAX_SERVERS
.oklen:
		mov di,DNSServers
		rep movsd
		mov [LastDNSServer],di
		popa
		jmp .opt_done
.not_dns:

		cmp dl,15	; DNS LOCAL DOMAIN option
		jne .not_localdomain
		pusha
		mov bx,si
		add bx,ax
		xor ax,ax
		xchg [bx],al	; Zero-terminate option
		mov di,LocalDomain
		call dns_mangle	; Convert to DNS label set
		mov [bx],al	; Restore ending byte
		popa
		jmp .opt_done
.not_localdomain:

		cmp dl,43	; VENDOR ENCAPSULATED option
		jne .not_vendor
		pusha
		mov dh,208	; Only recognize PXELINUX options
		mov cx,ax	; Length of option = max bytes to parse
		call parse_some_dhcp_options	; Parse recursive structure
		popa
		jmp .opt_done
.not_vendor:

		cmp dl,52	; OPTION OVERLOAD option
		jne .not_overload
		mov bl,[si]
		mov [OverLoad],bl
		jmp .opt_done
.not_overload:

		cmp dl,67	; BOOTFILE NAME option
		jne .not_bootfile
		mov di,BootFile
		jmp short .copyoption
.done:
		ret		; This is here to make short jumps easier
.not_bootfile:

		cmp dl,208	; PXELINUX MAGIC option
		jne .not_pl_magic
		cmp al,4	; Must have length == 4
		jne .opt_done
		cmp dword [si], htonl(0xF100747E)	; Magic number
		jne .opt_done
		or byte [DHCPMagic], byte 1		; Found magic #
		jmp short .opt_done
.not_pl_magic:

		cmp dl,209	; PXELINUX CONFIGFILE option
		jne .not_pl_config
		mov di,ConfigName
		or byte [DHCPMagic], byte 2	; Got config file
		jmp short .copyoption
.not_pl_config:

		cmp dl,210	; PXELINUX PATHPREFIX option
		jne .not_pl_prefix
		mov di,PathPrefix
		or byte [DHCPMagic], byte 4	; Got path prefix
		jmp short .copyoption
.not_pl_prefix:

		cmp dl,211	; PXELINUX REBOOTTIME option
		jne .not_pl_timeout
		cmp al,4
		jne .opt_done
		mov ebx,[si]
		xchg bl,bh	; Convert to host byte order
		rol ebx,16
		xchg bl,bh
		mov [RebootTime],ebx
		or byte [DHCPMagic], byte 8	; Got RebootTime
		; jmp short .opt_done
.not_pl_timeout:

		; Unknown option.  Skip to the next one.
.opt_done:
		add si,ax
.opt_done_noskip:
		jmp .loop

		; Common code for copying an option verbatim
.copyoption:
		xchg cx,ax
		rep movsb
		xchg cx,ax	; Now ax == 0
		stosb		; Null-terminate
		jmp short .opt_done_noskip

;
; genipopt
;
; Generate an ip=<client-ip>:<boot-server-ip>:<gw-ip>:<netmask>
; option into IPOption based on a DHCP packet in trackbuf.
; Assumes CS == DS == ES.
;
genipopt:
		pushad
		mov di,IPOption
		mov eax,'ip='
		stosd
		dec di
		mov eax,[MyIP]
		call gendotquad
		mov al,':'
		stosb
		mov eax,[ServerIP]
		call gendotquad
		mov al,':'
		stosb
		mov eax,[Gateway]
		call gendotquad
		mov al,':'
		stosb
		mov eax,[Netmask]
		call gendotquad	; Zero-terminates its output
		sub di,IPOption
		mov [IPOptionLen],di
		popad
		ret

;
; Call the receive loop while idle.  This is done mostly so we can respond to
; ARP messages, but perhaps in the future this can be used to do network
; console.
;
; hpa sez: people using automatic control on the serial port get very
; unhappy if we poll for ARP too often (the PXE stack is pretty slow,
; typically.)  Therefore, only poll if at least 4 BIOS timer ticks have
; passed since the last poll, and reset this when a character is
; received (RESET_IDLE).
;
reset_idle:
		push ax
		mov ax,[cs:BIOS_timer]
		mov [cs:IdleTimer],ax
		pop ax
		ret

check_for_arp:
		push ax
		mov ax,[cs:BIOS_timer]
		sub ax,[cs:IdleTimer]
		cmp ax,4
		pop ax
		jae .need_poll
		ret
.need_poll:	pushad
		push ds
		push es
		mov ax,cs
		mov ds,ax
		mov es,ax
		mov di,packet_buf
		mov [pxe_udp_read_pkt.status],al	; 0
		mov [pxe_udp_read_pkt.buffer],di
		mov [pxe_udp_read_pkt.buffer+2],ds
		mov word [pxe_udp_read_pkt.buffersize],packet_buf_size
		mov eax,[MyIP]
		mov [pxe_udp_read_pkt.dip],eax
		mov word [pxe_udp_read_pkt.lport],htons(9)	; discard port
		mov di,pxe_udp_read_pkt
		mov bx,PXENV_UDP_READ
		call pxenv
		; Ignore result...
		pop es
		pop ds
		popad
		RESET_IDLE
		ret

; -----------------------------------------------------------------------------
;  Common modules
; -----------------------------------------------------------------------------

%include "getc.inc"		; getc et al
%include "conio.inc"		; Console I/O
%include "writestr.inc"		; String output
writestr	equ cwritestr
%include "writehex.inc"		; Hexadecimal output
%include "configinit.inc"	; Initialize configuration
%include "parseconfig.inc"	; High-level config file handling
%include "parsecmd.inc"		; Low-level config file handling
%include "bcopy32.inc"		; 32-bit bcopy
%include "loadhigh.inc"		; Load a file into high memory
%include "font.inc"		; VGA font stuff
%include "graphics.inc"		; VGA graphics
%include "highmem.inc"		; High memory sizing
%include "strcpy.inc"		; strcpy()
%include "rawcon.inc"		; Console I/O w/o using the console functions
%include "dnsresolv.inc"	; DNS resolver

; -----------------------------------------------------------------------------
;  Begin data section
; -----------------------------------------------------------------------------

		section .data

hextbl_lower	db '0123456789abcdef'
copyright_str   db ' Copyright (C) 1994-', year, ' H. Peter Anvin'
		db CR, LF, 0
boot_prompt	db 'boot: ', 0
wipe_char	db BS, ' ', BS, 0
err_notfound	db 'Could not find kernel image: ',0
err_notkernel	db CR, LF, 'Invalid or corrupt kernel image.', CR, LF, 0
err_noram	db 'It appears your computer has less than '
		asciidec dosram_k
		db 'K of low ("DOS")'
		db CR, LF
		db 'RAM.  Linux needs at least this amount to boot.  If you get'
		db CR, LF
		db 'this message in error, hold down the Ctrl key while'
		db CR, LF
		db 'booting, and I will take your word for it.', CR, LF, 0
err_badcfg      db 'Unknown keyword in config file.', CR, LF, 0
err_noparm      db 'Missing parameter in config file.', CR, LF, 0
err_noinitrd    db CR, LF, 'Could not find ramdisk image: ', 0
err_nohighmem   db 'Not enough memory to load specified kernel.', CR, LF, 0
err_highload    db CR, LF, 'Kernel transfer failure.', CR, LF, 0
err_oldkernel   db 'Cannot load a ramdisk with an old kernel image.'
                db CR, LF, 0
err_notdos	db ': attempted DOS system call', CR, LF, 0
err_comlarge	db 'COMBOOT image too large.', CR, LF, 0
err_a20		db CR, LF, 'A20 gate not responding!', CR, LF, 0
err_bootfailed	db CR, LF, 'Boot failed: press a key to retry, or wait for reset...', CR, LF, 0
bailmsg		equ err_bootfailed
err_nopxe	db "No !PXE or PXENV+ API found; we're dead...", CR, LF, 0
err_pxefailed	db 'PXE API call failed, error ', 0
err_udpinit	db 'Failed to initialize UDP stack', CR, LF, 0
err_noconfig	db 'Unable to locate configuration file', CR, LF, 0
err_oldtftp	db 'TFTP server does not support the tsize option', CR, LF, 0
found_pxenv	db 'Found PXENV+ structure', CR, LF, 0
using_pxenv_msg db 'Old PXE API detected, using PXENV+ structure', CR, LF, 0
apiver_str	db 'PXE API version is ',0
pxeentry_msg	db 'PXE entry point found (we hope) at ', 0
pxenventry_msg	db 'PXENV entry point found (we hope) at ', 0
trymempxe_msg	db 'Scanning memory for !PXE structure... ', 0
trymempxenv_msg	db 'Scanning memory for PXENV+ structure... ', 0
undi_data_msg	  db 'UNDI data segment at:   ',0
undi_data_len_msg db 'UNDI data segment size: ',0
undi_code_msg	  db 'UNDI code segment at:   ',0
undi_code_len_msg db 'UNDI code segment size: ',0
cant_free_msg	db 'Failed to free base memory, error ', 0
notfound_msg	db 'not found', CR, LF, 0
myipaddr_msg	db 'My IP address seems to be ',0
tftpprefix_msg	db 'TFTP prefix: ', 0
localboot_msg	db 'Booting from local disk...', CR, LF, 0
cmdline_msg	db 'Command line: ', CR, LF, 0
ready_msg	db 'Ready.', CR, LF, 0
trying_msg	db 'Trying to load: ', 0
crlfloading_msg	db CR, LF			; Fall through
loading_msg     db 'Loading ', 0
dotdot_msg      db '.'
dot_msg         db '.', 0
fourbs_msg	db BS, BS, BS, BS, 0
aborted_msg	db ' aborted.'			; Fall through to crlf_msg!
crlf_msg	db CR, LF
null_msg	db 0
crff_msg	db CR, FF, 0
default_str	db 'default', 0
default_len	equ ($-default_str)
syslinux_banner	db CR, LF, 'PXELINUX ', version_str, ' ', date, ' ', 0
cfgprefix	db 'pxelinux.cfg/'		; No final null!
cfgprefix_len	equ ($-cfgprefix)

;
; Command line options we'd like to take a look at
;
; mem= and vga= are handled as normal 32-bit integer values
initrd_cmd	db 'initrd='
initrd_cmd_len	equ $-initrd_cmd

; This one we make ourselves
bootif_str	db 'BOOTIF='
bootif_str_len	equ $-bootif_str
;
; Config file keyword table
;
%include "keywords.inc"

;
; Extensions to search for (in *forward* order).
; (.bs and .bss are disabled for PXELINUX, since they are not supported)
;
		align 4, db 0
exten_table:	db '.cbt'		; COMBOOT (specific)
		db '.0', 0, 0		; PXE bootstrap program
		db '.com'		; COMBOOT (same as DOS)
		db '.c32'		; COM32
exten_table_end:
		dd 0, 0			; Need 8 null bytes here

;
; PXE unload sequences
;
new_api_unload:
		db PXENV_UDP_CLOSE
		db PXENV_UNDI_SHUTDOWN
		db PXENV_UNLOAD_STACK
		db PXENV_STOP_UNDI
		db 0
old_api_unload:
		db PXENV_UDP_CLOSE
		db PXENV_UNDI_SHUTDOWN
		db PXENV_UNLOAD_STACK
		db PXENV_UNDI_CLEANUP
		db 0

;
; PXE query packets partially filled in
;
pxe_bootp_query_pkt_2:
.status:	dw 0			; Status
.packettype:	dw 2			; DHCPACK packet
.buffersize:	dw trackbufsize		; Packet size
.buffer:	dw trackbuf, 0		; seg:off of buffer
.bufferlimit:	dw trackbufsize		; Unused

pxe_bootp_query_pkt_3:
.status:	dw 0			; Status
.packettype:	dw 3			; Boot server packet
.buffersize:	dw trackbufsize		; Packet size
.buffer:	dw trackbuf, 0		; seg:off of buffer
.bufferlimit:	dw trackbufsize		; Unused

pxe_bootp_size_query_pkt:
.status:	dw 0			; Status
.packettype:	dw 2			; DHCPACK packet
.buffersize:	dw 0			; Packet size
.buffer:	dw 0, 0			; seg:off of buffer
.bufferlimit:	dw 0			; Unused

pxe_udp_open_pkt:
.status:	dw 0			; Status
.sip:		dd 0			; Source (our) IP

pxe_udp_close_pkt:
.status:	dw 0			; Status

pxe_udp_write_pkt:
.status:	dw 0			; Status
.sip:		dd 0			; Server IP
.gip:		dd 0			; Gateway IP
.lport:		dw 0			; Local port
.rport:		dw 0			; Remote port
.buffersize:	dw 0			; Size of packet
.buffer:	dw 0, 0			; seg:off of buffer

pxe_udp_read_pkt:
.status:	dw 0			; Status
.sip:		dd 0			; Source IP
.dip:		dd 0			; Destination (our) IP
.rport:		dw 0			; Remote port
.lport:		dw 0			; Local port
.buffersize:	dw 0			; Max packet size
.buffer:	dw 0, 0			; seg:off of buffer

;
; Misc initialized (data) variables
;
		alignb 4, db 0
BaseStack	dd StackBuf		; ESP of base stack
		dw 0			; SS of base stack
NextSocket	dw 49152		; Counter for allocating socket numbers
KeepPXE		db 0			; Should PXE be kept around?

;
; TFTP commands
;
tftp_tail	db 'octet', 0				; Octet mode
tsize_str	db 'tsize' ,0				; Request size
tsize_len	equ ($-tsize_str)
		db '0', 0
blksize_str	db 'blksize', 0				; Request large blocks
blksize_len	equ ($-blksize_str)
		asciidec TFTP_LARGEBLK
		db 0
tftp_tail_len	equ ($-tftp_tail)

		alignb 2, db 0
;
; Options negotiation parsing table (string pointer, string len, offset
; into socket structure)
;
tftp_opt_table:
		dw tsize_str, tsize_len, tftp_filesize
		dw blksize_str, blksize_len, tftp_blksize
tftp_opts	equ ($-tftp_opt_table)/6

;
; Error packet to return on options negotiation error
;
tftp_opt_err	dw TFTP_ERROR				; ERROR packet
		dw TFTP_EOPTNEG				; ERROR 8: bad options
		db 'tsize option required', 0		; Error message
tftp_opt_err_len equ ($-tftp_opt_err)

		alignb 4, db 0
ack_packet_buf:	dw TFTP_ACK, 0				; TFTP ACK packet

;
; IP information (initialized to "unknown" values)
MyIP		dd 0			; My IP address
ServerIP	dd 0			; IP address of boot server
Netmask		dd 0			; Netmask of this subnet
Gateway		dd 0			; Default router
ServerPort	dw TFTP_PORT		; TFTP server port

;
; Variables that are uninitialized in SYSLINUX but initialized here
;
		alignb 4, db 0
BufSafe		dw trackbufsize/TFTP_BLOCKSIZE	; Clusters we can load into trackbuf
BufSafeSec	dw trackbufsize/512	; = how many sectors?
BufSafeBytes	dw trackbufsize		; = how many bytes?
EndOfGetCBuf	dw getcbuf+trackbufsize	; = getcbuf+BufSafeBytes
%ifndef DEPEND
%if ( trackbufsize % TFTP_BLOCKSIZE ) != 0
%error trackbufsize must be a multiple of TFTP_BLOCKSIZE
%endif
%endif
DHCPMagic	db 0			; DHCP site-specific option info