diff options
Diffstat (limited to 'examples/simple/smb.conf')
| -rw-r--r-- | examples/simple/smb.conf | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/examples/simple/smb.conf b/examples/simple/smb.conf new file mode 100644 index 00000000000..cdf65b337f7 --- /dev/null +++ b/examples/simple/smb.conf @@ -0,0 +1,165 @@ +; Configuration file for smbd. +; ============================================================================ +; For the format of this file and comprehensive descriptions of all the +; configuration option, please refer to the man page for smb.conf(5). +; +; The following configuration should suit most systems for basic usage and +; initial testing. It gives all clients access to their home directories and +; allows access to all printers specified in /etc/printcap. +; +; Things you need to check: +; -------------------------- +; +; 1: Check the path to your printcap file. If you are using a system that does +; not use printcap (eg., Solaris), create a file containing lines of the +; form +; +; printername|printername|printername| +; +; where each "printername" is the name of a printer you want to provide +; access to. Then alter the "printcap =" entry to point to the new file. +; +; If using Solaris, the following command will generate a suitable printcap +; file: +; +; lpc status | grep ":" | sed s/:/\|/ > myprintcap +; +; 2: Make sure the "print command" entry is correct for your system. This +; command should submit a file (represented by %s) to a printer +; (represented by %p) for printing and should REMOVE the file after +; printing. +; +; One most systems the default will be OK, as long as you get "printing =" +; right. +; +; It is also a good idea to use an absolute path in the print command +; as there is no guarantee the search path will be set correctly. +; +; 3: Make sure the "printing =" option is set correctly for your system. +; Possible values are "sysv", "bsd" or "aix". +; +; 4: Make sure the "lpq command" entry is correct for your system. The default +; may not work for you. +; +; 5: Make sure that the user specified in "guest account" exists. Typically +; this will be a user that cannot log in and has minimal privileges. +; Often the "nobody" account doesn't work (very system dependant). +; +; 6: You should consider the "security =" option. See a full description +; in the main documentation and the smb.conf(5) manual page +; +; 7: Look at the "hosts allow" option, unless you want everyone on the internet +; to be able to access your files. +; +[global] + printing = bsd + printcap name = /etc/printcap + load printers = yes + guest account = pcguest +; This next option sets a separate log file for each client. Remove +; it if you want a combined log file. + log file = /usr/local/samba/log.%m + +; You will need a world readable lock directory and "share modes=yes" +; if you want to support the file sharing modes for multiple users +; of the same files +; lock directory = /usr/local/samba/var/locks +; share modes = yes + +[homes] + comment = Home Directories + browseable = no + read only = no + create mode = 0750 + +[printers] + comment = All Printers + browseable = no + printable = yes + public = no + writable = no + create mode = 0700 + +; you might also want this one +; [tmp] +; comment = Temporary file space +; path = /tmp +; read only = no +; public = yes + +; +; Other examples. +; +; A private printer, usable only by fred. Spool data will be placed in fred's +; home directory. Note that fred must have write access to the spool directory, +; wherever it is. +;[fredsprn] +; comment = Fred's Printer +; valid users = fred +; path = /homes/fred +; printer = freds_printer +; public = no +; writable = no +; printable = yes +; +; A private directory, usable only by fred. Note that fred requires write +; access to the directory. +;[fredsdir] +; comment = Fred's Service +; path = /usr/somewhere/private +; valid users = fred +; public = no +; writable = yes +; printable = no +; +; A publicly accessible directory, but read only, except for people in +; the staff group +;[public] +; comment = Public Stuff +; path = /usr/somewhere/public +; public = yes +; writable = no +; printable = no +; write list = @staff +; +; a service which has a different directory for each machine that connects +; this allows you to tailor configurations to incoming machines. You could +; also use the %u option to tailor it by user name. +; The %m gets replaced with the machine name that is connecting. +;[pchome] +; comment = PC Directories +; path = /usr/pc/%m +; public = no +; writeable = yes +; +; +; A publicly accessible directory, read/write to all users. Note that all files +; created in the directory by users will be owned by the default user, so +; any user with access can delete any other user's files. Obviously this +; directory must be writable by the default user. Another user could of course +; be specified, in which case all files would be owned by that user instead. +;[public] +; path = /usr/somewhere/else/public +; public = yes +; only guest = yes +; writable = yes +; printable = no +; +; +; The following two entries demonstrate how to share a directory so that two +; users can place files there that will be owned by the specific users. In this +; setup, the directory should be writable by both users and should have the +; sticky bit set on it to prevent abuse. Obviously this could be extended to +; as many users as required. +;[myshare] +; comment = Mary's and Fred's stuff +; path = /usr/somewhere/shared +; valid users = mary fred +; public = no +; writable = yes +; printable = no +; create mask = 0765 + + + + |