diff options
| author | Jeremy Allison <jra@samba.org> | 1998-11-11 02:09:26 +0000 |
|---|---|---|
| committer | Jeremy Allison <jra@samba.org> | 1998-11-11 02:09:26 +0000 |
| commit | caa86e201b9f0ff352abe38c516bd81704cb9d6c (patch) | |
| tree | ca5cee05b1590550d0d6dc0af30266488ac95c06 /swat | |
| parent | 6d04a7dc259f7a573a4e48dbf7bc0c0d1962e8f7 (diff) | |
| download | samba-caa86e201b9f0ff352abe38c516bd81704cb9d6c.tar.gz | |
Swat now uses the auto-generated smb.conf.5.html.
Jeremy.
(This used to be commit 798fa22d37f117ff4842ce1ca108625539391d82)
Diffstat (limited to 'swat')
| -rw-r--r-- | swat/help/parameters.html | 2260 | ||||
| -rw-r--r-- | swat/help/smb.conf.5.html | 13 |
2 files changed, 9 insertions, 2264 deletions
diff --git a/swat/help/parameters.html b/swat/help/parameters.html deleted file mode 100644 index b1f80a17e72..00000000000 --- a/swat/help/parameters.html +++ /dev/null @@ -1,2260 +0,0 @@ -<HTML> -<BODY> - -<H1 ALIGN=CENTER>SWAT Parameters help</H1> - -<hr> - -<H3><A NAME="admin users">admin users (S)</A></H3> -This is a list of users who will be granted administrative privileges on the -share. This means that they will do all file operations as the super-user -(root).<P> -You should use this option very carefully, as any user in this list will be -able to do anything they like on the share, irrespective of file permissions.<P> -<B>Default:</B> no admin users <P> -<B>Example:</B> admin users = jason <P> - -<H3><A NAME="announce as">announce as (G)</A></H3> -This specifies what type of server nmbd will announce itself as in browse -lists. By default this is set to Windows NT. The valid options are "NT", -"Win95" or "WfW" meaining Windows NT, Windows 95 and Windows for Workgroups -respectively. Do not change this parameter unless you have a specific need to -stop Samba appearing as an NT server as this may prevent Samba servers from -participating as browser servers correctly. <P> -<B>Default:</B> announce as = NT <P> -<B>Example:</B> announce as = Win95 <P> - -<H3><A NAME="announce version">announce version (G)</A></H3> -This specifies the major and minor version numbers that nmbd will use when -announcing itself as a server. The default is 4.2. Do not change this parameter -unless you have a specific need to set a Samba server to be a downlevel -server. <P> -<B>Default:</B> announce version = 4.2 <P> -<B>Example:</B> announce version = 2.0 <P> - -<H3><A NAME="alternate permissions">alternate permissions (S)</A></H3> -This option affects the way the "read only" DOS attribute is produced for -UNIX files. If this is No then the read only bit is set for files on -writeable shares which the user cannot write to. <P> -If this is Yes then "read only" is set for files when the user write bit is -not set. <P> -The latter behaviour is useful when users copy files from each others -directories, and use a file manager that preserves permissions. Without this -option they may get annoyed as all copied files will have the "read only" -bit set. <P> -<B>Default:</B> alternate permissions = no <P> -<B>Example:</B> alternate permissions = yes <P> - -<H3><A NAME="available">available (S)</A></H3> -This parameter lets you 'turn off' a service. If 'available = no', then ALL -attempts to connect to the service will fail. Such failures are logged. <P> -<B>Default:</B> available = yes <P> -<B>Example:</B> available = no <P> - -<H3><A NAME="bind interfaces only">bind interfaces only (G)</A></H3> -This global parameter (new for 1.9.18) allows the Samba admin to limit what -interfaces on a machine will serve smb requests. If affects file service -(smbd) and name service (nmbd) in slightly different ways. <P> -For name service it causes nmbd to bind to ports 137 and 138 on the interfaces -listed in the 'interfaces' parameter. nmbd also binds to the 'all addresses' -interface (0.0.0.0) on ports 137 and 138 for the purposes of reading broadcast -messages. If this option is not set then nmbd will service name requests on -all of these sockets. If "bind interfaces only" is set then nmbd will check -the source address of any packets coming in on the broadcast sockets and -discard any that don't match the broadcast addresses of the interfaces in the -<A HREF="#interfaces">interfaces</A> parameter list. As unicast packets are -received on the other sockets it allows nmbd to refuse to serve names to -machines that send packets that arrive through any interfaces not listed in -the 'interfaces' list. IP Source address spoofing does defeat this simple -check, however so it must not be used seriously as a security feature for -nmbd. <P> -For file service it causes smbd to bind only to the interface list given in -the <A HREF="#interfaces">interfaces</A> parameter. This restricts -the networks that smbd will serve to packets coming in those interfaces. -Note that you should not use this parameter for machines that are serving -ppp or other intermittant or non-broadcast network interfaces as it will -not cope with non-permanent interfaces. <P> -<B>Default:</B> bind interfaces only = No <P> -<B>Example:</B> bind interfaces only = Yes <P> - -<H3><A NAME="browseable">browseable (S)</A></H3> -This controls whether this share is seen in the list of available shares -in a net view and in the browse list. <P> -<B>Default:</B> browseable = Yes <P> -<B>Example:</B> browseable = No <P> - -<H3><A NAME="browse list">browse list(G)</A></H3> -This controls whether the smbd will serve a browse list to a client doing a -NetServerEnum call. Normally set to Yes. You should never need to change -this. <P> -<B>Default:</B> browse list = Yes <P> - -<H3><A NAME="case sensitive">case sensitive (G)</A></H3> -Controls whether filenames are case sensitive. If they aren't then Samba must -do a filename search and match on passed names.<P> -<B>Default:</B> case sensitive = No <P> -See the discussion on <A HREF="#NAME MANGLING">NAME MANGLING</A>. <P> - -<H3><A NAME="character set">character set (G)</A></H3> -This allows smbd to map incoming characters from a DOS 850 Code page to -either a Western European (ISO8859-1) or Easter European (ISO8859-2) code page. -Normally not set, meaning no filename translation is done. <P> -<B>Default:</B> character set = <P> -<B>Example:</B> character set = iso8859-1 <P> - -<H3><A NAME="client code page">client code page (G)</A></H3> -Currently (Samba 1.9.19 and above) this may be set to one of the following -values: 437, 850, 852, 866, 932, 936, 949, or 950. It specifies the base DOS -code page that the clients accessing Samba are using. To determine this, -open a DOS command prompt and type the command "chcp". This will output -the code page. The default for USA MS-DOS, Windows 95, and Windows NT releases -is code page 437. The default for western european releases of the above -operating systems is code page 850. <P> -This parameter co-operates with the <A HREF="#valid chars">valid chars</A> -parameter in determining what characters are valid in filenames -and how capitalization is done. It has been added as a convenience for -clients whose code page is either 437 or 850 so a convoluted "valid chars" -string does not have to be determined. If you set both this parameter and -the "valid chars" parameter the "client code page" parameter MUST be -set before the "valid chars" in the smb.conf file. The "valid chars" string -will then augment the character settings in the "client code page" parameter. -<P> -If "client code page" is set to a value other than those listed above, it will -default to 850. <P> -See also : <A HREF="#valid chars">valid chars</A>. <P> -<B>Default:</B> client code page = 850 <P> -<B>Example:</B> client code page = 437 <P> - -<H3><A NAME="coding system">coding system (G)</A></H3> -<B>Default:</B> coding system = <P> - -<H3><A NAME="comment">comment (S)</A></H3> -This is a text field that is seen next to a share when a client does a net -view to list what shares are available. <P> -If you want to set the string that is displayed next to the machine name then -see the <A HREF="#server string">server string</A> command. <P> -<B>Default:</B> No comment string <P> -<B>Example:</B> comment = Fred's Files <P> - -<H3><A NAME="create mask">create mask (S)</A></H3> -A synonym for this parameter is 'create mode'. <P> -When a file is created, the neccessary permissions are calculated according -to the mapping from DOS modes to UNIX permissions, and the resulting UNIX -mode is then bit-wise 'AND'ed with this parameter. This parameter may be -thought of as a bit-wise MASK for the UNIX modes of a file. Any bit *not* set -here will be removed from the modes set on a file when it is created. <P> -The default value of this parameter removes the 'group' and 'other' write and -execute bits from the UNIX modes. <P> -Following this Samba will bit-wise 'OR' the UNIX mode created from this -parameter with the value of the -<A HREF="#force create mode">force create mode</A> -parameter which is set to 000 by default. <P> -For Samba 1.9.17 and above this parameter no longer affects directory modes. -See the parameter <A HREF="#directory mask">directory mask</A> for details. <P> -See also the <A HREF="#force create mode">force create mode</A> parameter for -forcing particular mode bits to be set on created files. See also the -<A HREF="#directory mask">directory mask</A> -parameter for masking mode bits on created directories. <P> -<B>Default:</B> create mask = 0744 <P> -<B>Example:</B> create mask = 0775 <P> - -<H3><A NAME="deadtime">deadtime (G)</A></H3> -The value of the parameter (a decimal integer) represents the number of -minutes of inactivity before a connection is considered dead, and it is -disconnected. The deadtime only takes effect if the number of open files is -zero. <P> -This is useful to stop a server's resources being exhausted by a large number -of inactive connections. <P> -Most clients have an auto-reconnect feature when a connection is broken so in -most cases this parameter should be transparent to users. <P> -Using this parameter with a timeout of a few minutes is recommended for most -systems. <P> -A deadtime of zero indicates that no auto-disconnection should be performed.<P> -<B>Default:</B> deadtime = 0 <P> -<B>Example:</B> deadtime = 15 - -<H3><A NAME="default case">default case (S)</A></H3> -Controls what the default case (upper/lower) is for new filenames.<P> -See the section on <A HREF="#NAME MANGLING">NAME MANGLING</A> <P> -<B>Default:</B> default case = lower <P> -<B>Example:</B> default case = upper <P> - -<H3><A NAME="default service">default service (G)</A></H3> A synonym for this -parameter is 'default'. <P> -This parameter specifies the name of a service which will be connected to if -the service actually requested cannot be found. Note that the square brackets -are NOT given in the parameter value (see example below). <P> -There is no default value for this parameter. If this parameter is not given, -attempting to connect to a nonexistent service results in an error. <P> -Typically the default service would be a public, read-only service. <P> -Also note that as of 1.9.14 the apparent service name will be changed to be -that of the requested service, this is very useful as it allows -you to use macros like %S to make a wildcard service. <P> -Note also that any _ characters in the name of the service used in the default -service will get mapped to a /. This allows for interesting things. <P> -<B>Example:</B> default service = pub<P> -<pre> -[pub] - path = /%S -</pre> - -<H3><A NAME="delete readonly">delete readonly (S)</A></H3> -This parameter allows readonly files to be deleted. This is not normal DOS -semantics, but is allowed by UNIX. <P> -This option may be useful for running applications such as rcs, where UNIX -file ownership prevents changing file permissions, and DOS semantics prevent -deletion of a read only file. <P> -<B>Default:</B> delete readonly = No <P> -<B>Example:</B> delete readonly = Yes <P> - -<H3><A NAME="delete veto files">delete veto files (S)</A></H3> -This option is used when Samba is attempting to delete a directory that -contains one or more vetoed directories (see the -<A HREF="#veto files">veto files</A> option). If this option is set to No -(the default) then if a vetoed directory contains any non-vetoed files or -directories then the directory delete will fail. This is usually what you -want. <P> -If this option is set to Yes, then Samba will attempt to recursively delete -any files and directories within the vetoed directory. This can be useful -for integration with file serving systems such as Netatalk, which create -meta-files within directories you might normally veto DOS/Windows users -from seeing (eg. .AppleDouble) <P> -Setting 'delete veto files = Yes' allows these directories to be -transparently deleted when the parent directory is deleted (so long as the -user has permissions to do so). <P> -<B>Default:</B> delete veto files = No <P> -<B>Example:</B> delete veto files = Yes <P> -See <A HREF="#veto files">veto files</A> <P> - -<H3><A NAME="dfree command">dfree command (G)</A></H3> -The dfree command setting should only be used on systems where a problem -occurs with the internal disk space calculations. This has been known to -happen with Ultrix, but may occur with other operating systems. The symptom -that was seen was an error of "Abort Retry Ignore" at the end of each -directory listing. <P> -This setting allows the replacement of the internal routines to calculate the -total disk space and amount available with an external routine. The example -below gives a possible script that might fulfill this function. <P> -The external program will be passed a single parameter indicating a directory -in the filesystem being queried. This will typically consist of the string -"./". The script should return two integers in ascii. The first should be the -total disk space in blocks, and the second should be the number of available -blocks. An optional third return value can give the block size in bytes. The -default blocksize is 1024 bytes. <P> -Note: Your script should NOT be setuid or setgid and should be owned by -(and writable only by) root! <P> -<B>Default:</B> By default internal routines for determining the disk capacity -and remaining space will be used. <P> -<B>Example:</B> dfree command = /usr/local/samba/bin/dfree <P> -Where the script dfree (which must be made executable) could be <P> -<pre> - #!/bin/sh - df $1 | tail -1 | awk '{print $2" "$4}' -</pre> -or perhaps (on Sys V) <P> -<pre> - #!/bin/sh - /usr/bin/df -k $1 | tail -1 | awk '{print $3" "$5}' -</pre> -Note that you may have to replace the command names with full path names on -some systems. <P> - -<H3><A NAME="directory mask">directory mask (S)</A></H3> -A synonym for this parameter is 'directory mode'. <P> -This parameter is the octal modes which are used when converting DOS modes -to UNIX modes when creating UNIX directories. <P> -When a directory is created, the neccessary permissions are calculated -according to the mapping from DOS modes to UNIX permissions, and the resulting -UNIX mode is then bit-wise 'AND'ed with this parameter. This parameter may be -thought of as a bit-wise MASK for the UNIX modes of a directory. Any bit *not* -set here will be removed from the modes set on a directory when it is -created. <P> -The default value of this parameter removes the 'group' and 'other' write -bits from the UNIX mode, allowing only the user who owns the directory to -modify it. <P> -Following this Samba will bit-wise 'OR' the UNIX mode created from this -parameter with the value of the -<A HREF="#force directory mode">force directory mode</A> -parameter. This parameter is set to 000 by default (ie. no extra mode bits -are added). <P> -See the <A HREF="#force directory mode">force directory mode</A> -parameter to cause particular mode bits to always be set on created -directories. <P> -See also the <A HREF="#create mask">create mask</A> parameter -for masking mode bits on created files. <P> -<B>Default:</B> directory mask = 0755 <P> -<B>Example:</B> directory mask = 0775 <P> - -<H3><A NAME="dns proxy">dns proxy (G)</A></H3> -Specifies that nmbd should (as a WINS server), on finding that a NetBIOS name -has not been registered, treat the NetBIOS name word-for-word as a DNS name.<P> -Note that the maximum length for a NetBIOS name is 15 characters, so the DNS -name (or DNS alias) can likewise only be 15 characters, maximum. <P> -<B>Default:</B> dns proxy = yes <P> - -<H3><A NAME="domain admin users">domain admin users (G)</A></H3> -<P> - -<H3><A NAME="domain controller">domain controller (G)</A></H3> -<h4>This is wrong</h4> -Specifies the DNS name or IP address of the machine to refer domain logons -from Win95 machines to. You should never need to set this parameter. <P> -<B>Default:</B> domain controller = no <P> - -<H3><A NAME="domain groups">domain groups (G)</A></H3> -<P> - -<H3><A NAME="domain guest users">domain guest users (G)</A></H3> -<P> - -<H3><A NAME="domain hosts allow">domain hosts allow (G)</A></H3> -<P> - -<H3><A NAME="domain hosts deny">domain hosts deny (G)</A></H3> -<P> - -<H3><A NAME="domain logons">domain logons (G)</A></H3> -If set to Yes, the Samba server will serve Windows 95 domain -logons for the workgroup it is in. For more details on setting up this -feature see the file DOMAINS.txt in the Samba source documentation directory. -<P> -<B>Default:</B> domain logons = no <P> - -<H3><A NAME="domain master">domain master (G)</A></H3> -Enable WAN-wide browse list collation. Local master browsers on -broadcast-isolated subnets will give samba their local browse lists, and -ask for a complete copy of the browse list for the whole wide area network. -Browser clients will then contact their local master browser, and will -receive the domain-wide browse list, instead of just the list for their -broadcast-isolated subnet. There should only be one "domain master" for -each workgroup name.<P> -<B>Default:</B> domain master = no <P> - -<H3><A NAME="domain other sid">domain other sid (G)</A></H3> -<P> - -<H3><A NAME="domain sid">domain sid (G)</A></H3> -<P> - -<H3><A NAME="dont descend">dont descend (S)</A></H3> -There are certain directories on some systems (eg., the /proc tree under Linux) -that are either not of interest to clients or are infinitely deep (recursive). -This parameter allows you to specify a comma-delimited list of directories -that the server should always show as empty. <P> -Note that Samba can be very fussy about the exact format of the "dont descend" -entries. For example you may need "./proc" instead of just "/proc". -Experimentation is the best policy :-) <P> -<B>Default:</B> none (i.e., all directories are OK to descend) <P> -<B>Example:</B> dont descend = /proc,/dev <P> - -<H3><A NAME="dos filetimes">dos filetimes (S)</A></H3> -Under DOS and Windows, if a user can write to a file they can change the -timestamp on it. Under POSIX semantics, only the owner of the file or root -may change the timestamp. By default, Samba runs with POSIX semantics and -refuses to change the timestamp on a file if the user smbd is acting on -behalf of is not the file owner. Setting this option to Yes allows DOS -semantics and smbd will change the file timstamp as DOS requires. This is a -correct implementation of a previous compile-time options (UTIME_WORKAROUND) -which was broken and is now removed. <P> -<B>Default:</B> dos filetimes = No <P> -<B>Example:</B> dos filetimes = Yes <P> - -<H3><A NAME="dos filetime resolution">dos filetime resolution (S)</A></H3> -Under the DOS and Windows FAT filesystem, the finest granulatity on time -resolution is two seconds. Setting this parameter for a share causes Samba -to round the reported time down to the nearest two second boundary when a -query call that requires one second resolution is made to smbd. <P> -This option is mainly used as a compatibility option for Visual C++ when -used against Samba shares. If oplocks are enabled on a share, Visual C++ -uses two different time reading calls to check if a file has changed since -it was last read. One of these calls uses a one-second granularity, the -other uses a two second granularity. As the two second call rounds any odd -second down, then if the file has a timestamp of an odd number of seconds -then the two timestamps will not match and Visual C++ will keep reporting -the file has changed. Setting this option causes the two timestamps to -match, and Visual C++ is happy. <P> -<B>Default:</B> dos filetime resolution = No <P> -<B>Example:</B> dos filetime resolution = Yes <P> - -<H3><A NAME="encrypt passwords">encrypt passwords (G)</A></H3> -This boolean controls whether encrypted passwords will be negotiated with -the client. Note that Windows NT 4.0 SP3 and above will by default expect -encrypted passwords unless a registry entry is changed. To use encrypted -passwords in Samba see the file docs/ENCRYPTION.txt. <P> -<B>Default:</B> encrypt passwords = No <P> - -<H3><A NAME="exec">exec (S)</A></H3> -A synonym for this is preexec. <P> -This option specifies a command to be run whenever a connection is made to -the service. It takes the usual substitutions. <P> -An interesting example is to send the users a welcome message every time -they log in. Maybe a message of the day? Here is an example: <P> -exec = csh -c 'echo \"Welcome to %S!\" | \ /usr/local/samba/bin/smbclient -M %m -I %I' & <P> -Of course, this could get annoying after a while :-) <P> -See also <A HREF="#postexec">postexec</A> <P> -<B>Default:</B> none (no command executed) <P> -<B>Example:</B> exec = echo \"%u connected to %S from %m (%I)\" >> /tmp/log <P> - - -<H3><A NAME="fake directory create times">fake directory create times (S)</A></H3> -NTFS and Windows VFAT file systems keep a create time for all files and -directories. This is not the same as the ctime - status change time - that -Unix keeps, so Samba by default reports the earliest of the various times -Unix does keep. Setting this parameter for a share causes Samba to always -report midnight 1-1-1980 as the create time for directories. <P> -This option is mainly used as a compatibility option for Visual C++ -when used against Samba shares. Visual C++ generated makefiles have the -object directory as a dependency for each object file, and a make rule -to create the directory. Also, when NMAKE compares timestamps it uses the -creation time when examining a directory. Thus the object directory will -be created if it does not exist, but once it does exist it will always -have an earlier timestamp than the object files it contains. <P> -However, Unix time semantics mean that the create time reported by Samba -will be updated whenever a file is created or deleted in the directory. -NMAKE therefore finds all object files in the object directory bar the last -one built are out of date compared to the directory and rebuilds them. -Enabling this option ensures directories always predate their contents and -an NMAKE build will proceed as expected. <P> -<B>Default:</B> fake directory create times = No <P> -<B>Example:</B> fake directory create times = Yes <P> - -<H3><A NAME="fake oplocks">fake oplocks (S)</A></H3> -Oplocks are the way that SMB clients get permission from a server to locally -cache file operations. If a server grants an oplock (opportunistic -lock) then the client is free to assume that it is the only one accessing -the file and it will aggressively cache file data. With some oplock types -the client may even cache file open/close operations. This can give enormous -performance benefits. <P> -When you set "fake oplocks = yes" Samba will always grant oplock requests -no matter how many clients are using the file. <P> -By enabling this option on all read-only shares or shares that you know -will only be accessed from one client at a time you will see a big performance -improvement on many operations. If you enable this option on shares where -multiple clients may be accessing the files read-write at the same time -you can get data corruption. Use this option carefully! <P> -It is generally much better to use the real oplock support except for -physically read-only media such as CDROMs. <P> -<B>Default:</B> fake oplocks = No <P> -<B>Example:</B> fake oplocks = Yes <P> - -<H3><A NAME="follow symlinks">follow symlinks (S)</A></H3> -This parameter allows the Samba administrator to stop smbd from following -symbolic links in a particular share. Setting this parameter to "No" prevents -any file or directory that is a symbolic link from being followed (the -user will get an error). This option is very useful to stop users from -adding a symbolic link to /etc/pasword in their home directory for instance. -However it will slow filename lookups down slightly. <P> -<B>Default:</B> follow symlinks = Yes (smbd will follow symbolic links)<P> - -<H3><A NAME="force create mode">force create mode (S)</A></H3> -This parameter specifies a set of UNIX mode bit permissions that will *always* -be set on a file created by Samba. This is done by bitwise 'OR'ing these -bits onto the mode bits of a file that is being created. The modes in this -parameter are bitwise 'OR'ed onto the file mode after the mask set in the -<A HREF="#create mask">create mask</A> parameter is applied. <P> -See also the parameter <A HREF="#create mask">create mask</A> for details -on masking mode bits on created files. <P> -<B>Default:</B> force create mode = 000 <P> -<B>Example:</B> force create mode = 0755 <P> -would force all created files to have read and execute permissions set for -'group' and 'other' as well as the read/write/execute bits set for the -'user'. <P> - -<H3><A NAME="force directory mode">force directory mode (S)</A></H3> -This parameter specifies a set of UNIX mode bit permissions that will *always* -be set on a directory created by Samba. This is done by bitwise 'OR'ing these -bits onto the mode bits of a directory that is being created. The default for -this parameter is (in octel) 0000 which will not add any extra permission bits -to a created directory. This operation is done after the mode mask in the -parameter <A HREF="#directory mask">directory mask</A> is applied. <P> -See also the parameter <A HREF="#directory mask">directory mask</A> -for details on masking mode bits on created directories. <P> -<B>Default:</B> force directory mode = 000 <P> -<B>Example:</B> force directory mode = 0755 <P> -would force all created directories to have read and execute permissions -set for 'group' and 'other' as well as the read/write/execute bits set for -the 'user'. <P> - -<H3><A NAME="force group">force group (S)</A></H3> -This specifies a group name that all connections to this service should be -made as. This may be useful for sharing files. <P> -<B>Default:</B> no forced group <P> -<B>Example:</B> force group = agroup <P> - -<H3><A NAME="force user">force user (S)</A></H3> -This specifies a user name that all connections to this service should be -made as. This may be useful for sharing files. You should also use it -carefully as using it incorrectly can cause security problems. <P> -This user name only gets used once a connection is established. Thus clients -still need to connect as a valid user and supply a valid password. Once -connected, all file operations will be performed as the "forced user", -no matter what username the client connected as. <P> -<B>Default:</B> no forced user <P> -<B>Example:</B> force user = auser <P> - -<H3><A NAME="getwd cache">getwd cache (G)</A></H3> -This is a tuning option. When this is enabled a cacheing algorithm will be -used to reduce the time taken for getwd() calls. This can have a significant -impact on performance, especially when widelinks is No. <P> -<B>Default:</B>getwd cache = No <P> -<B>Example:</B>getwd cache = Yes <P> - -<H3><A NAME="guest account">guest account (S)</A></H3> -This is a username which will be used for access to services which are -specified as <A HREF="#guest ok">guest ok</A>. Whatever privileges this -user has will be available to any client connecting to the guest service. -Typically this user will exist in the password file, but will not have a -valid login. If a username is specified in a given service, the specified -username overrides this one. <P> -One some systems the account "nobody" may not be able to print. Use another -account in this case. You should test this by trying to log in as your -guest user (perhaps by using the "su -" command) and trying to print using -<B>lpr</B>. <P> -Note that as of version 1.9 of Samba this option may be set differently -for each service. <P> -<B>Default:</B>specified at compile time <P> -<B>Example:</B>guest account = nobody - -<H3><A NAME="guest ok">guest ok (S)</A></H3> -A synonym for this parameter is 'public'. <P> -If this parameter is 'Yes' for a service, then no password is required -to connect to the service. Privileges will be those of the guest account. <P> -See the section below on -<A HREF="#USERNAME/PASSWORD VALIDATION">USERNAME/PASSWORD VALIDATION</A> -for more information about this option. <P> -<B>Default:</B> guest ok = No <P> -<B>Example:</B> guest ok = Yes - -<H3><A NAME="guest only">guest only (S)</A></H3> -If this parameter is 'Yes' for a service, then only guest connections to the -service are permitted. This parameter will have no affect if -<A HREF="#guest ok">guest ok</A> is not set for the service. <P> -See the section below on -<A HREF="#USERNAME/PASSWORD VALIDATION">USERNAME/PASSWORD VALIDATION</A> for -more information about this option. <P> -<B>Default:</B> guest only = No <P> -<B>Example:</B> guest only = Yes - -<H3><A NAME="hide dot files">hide dot files (S)</A></H3> -This is a boolean parameter that controls whether files starting with a dot -appear as hidden files. <P> -<B>Default:</B> hide dot files = Yes <P> -<B>Example:</B> hide dot files = No <P> - -<H3><A NAME="hide files">hide files (S)</A></H3> -This is a list of files or directories that are not visible but are accessible. -The DOS 'hidden' attribute is applied to any files or directories that match.<P> -Each entry in the list must be separated by a "/", which allows spaces -to be included in the entry. '*' and '?' can be used to specify multiple -files or directories as in DOS wildcards. <P> -Each entry must be a unix path, not a DOS path and must not include the unix -directory separator "/". <P> -Note that the case sensitivity option is applicable in hiding files. <P> -Setting this parameter will affect the performance of Samba, as it will -be forced to check all files and directories for a match as they are scanned.<P> -See also <A HREF="#hide dot files">hide dot files</A>, -<A HREF="#veto files">veto files</A> and -<A HREF="#case sensitive">case sensitive</A> <P> -<B>Default</B> No files or directories are hidden by this option -(dot files are hidden by default because of the "hide dot files" option). <P> -<B>Example</B> hide files = /.*/DesktopFolderDB/TrashFor%m/resource.frk/ <P> -The above example is based on files that the Macintosh client (DAVE) creates -for internal use, and also still hides all files beginning with a dot. <P> - -<H3><A NAME="homedir map">homedir map (G)</A></H3> -If <A HREF="#NIS homedir">NIS homedir</A> is Yes, this parameter specifies -the NIS (or YP) map from which the server for the user's home directory should -be extracted. At present, only the Sun auto.home map format is understood. -The form of the map is: <P> - username server:/some/file/system <P> -and the program will extract the servername from before the first ':'. There -should probably be a better parsing system that copes with different map -formats and also Amd (another automounter) maps. <P> -NB: The -DNETGROUP option is required in the Makefile for option -to work and on some architectures the line -lrpcsvc needs to be added to -the LIBSM variable. This is required for Solaris 2, FreeBSD and HPUX. <P> -See also <A HREF="#NIS homedir">NIS homedir</A> <P> -<B>Default:</B> homedir map = auto.home <P> -<B>Example:</B> homedir map = amd.homedir - -<H3><A NAME="hosts allow">hosts allow (S)</A></H3> -A synonym for this parameter is 'allow hosts'. <P> -This parameter is a comma delimited set of hosts which are permitted to access -a service. <P> -If specified in the [global] section then it will apply to all services, -regardless of whether the individual service has a different setting. <P> -You can specify the hosts by name or IP number. For example, you could restrict -access to only the hosts on a Class C subnet with something like -"hosts allow = 150.203.5.". <P> -You can also specify hosts by network/netmask pairs and by netgroup names -if your system supports netgroups. The EXCEPT keyword can also be used -to limit a wildcard list. The following examples may provide some help: <P> -Example 1: allow all IPs in 150.203.*.* except one <P> - hosts allow = 150.203. EXCEPT 150.203.6.66 <P> -Example 2: allow hosts that match the given network/netmask <P> - hosts allow = 150.203.15.0/255.255.255.0 <P> -Example 3: allow a couple of hosts <P> - hosts allow = lapland, arvidsjaur <P> -Example 4: allow only hosts in netgroup "foonet" or localhost, but deny -access from one particular host <P> - hosts allow = @foonet, localhost<P> - hosts deny = pirate <P> -Note that access still requires suitable user-level passwords. <P> -See <B>testparm</B>(1) for a way of testing your host access to see if it -does what you expect. <P> -<B>Default:</B> none (i.e., all hosts permitted access) <P> -<B>Example:</B> hosts allow = 150.203.5. myhost.mynet.edu.au<P> - -<H3><A NAME="hosts deny">hosts deny (S)</A></H3> -A synonym for this parameter is 'deny hosts'. <P> -This is the opposite of <A HREF="#hosts allow">hosts allow</A> - hosts listed -here are NOT permitted access to services unless the specific services have -their own lists to override this one. Where the lists conflict, the 'allow' -list takes precedence. <P> -<B>Default:</B> none (i.e., no hosts specifically excluded) <P> -<B>Example:</B>hosts deny = 150.203.4. badhost.mynet.edu.au <P> - -<H3><A NAME="hosts equiv">hosts equiv (G)</A></H3> -If this global parameter is a non-null string, it specifies the name of a -file to read for the names of hosts and users who will be allowed access -without specifying a password. <P> -This is not be confused with <A HREF="#hosts allow">hosts allow</A> which is -about hosts access to services and is more useful for guest services. -<B>hosts equiv</B> may be useful for NT clients which will not supply -passwords to samba. <P> -NOTE: The use of hosts.equiv can be a major security hole. This is because you -are trusting the PC to supply the correct username. It is very easy to get a -PC to supply a false username. I recommend that the hosts.equiv option be -only used if you really know what you are doing, or perhaps on a home network -where you trust your wife and kids :-) <P> -<B>Default</B> No host equivalences <P> -<B>Example</B> hosts equiv = /etc/hosts.equiv <P> - -<H3><A NAME="include">include (G)</A></H3> -This allows you to include one config file -inside another. The file is included literally, as though typed in place. <P> -It takes the standard substitutions, except %u, %P and %S <P> - -<H3><A NAME="interfaces">interfaces (G)</A></H3> -This option allows you to setup multiple network interfaces, so that -Samba can properly handle browsing on all interfaces. <P> -The option takes a list of ip/netmask pairs. The netmask may either be a -bitmask, or a bitlength. <P> -For example, the following line: <P> - interfaces = 192.168.2.10/24 192.168.3.10/24 <P> -would configure two network interfaces with IP addresses 192.168.2.10 and -192.168.3.10. The netmasks of both interfaces would be set to 255.255.255.0.<P> -You could produce an equivalent result by using: <P> - interfaces = 192.168.2.10/255.255.255.0 192.168.3.10/255.255.255.0<P> -if you prefer that format. <P> -If this option is not set then Samba will attempt to find a primary interface, -but won't attempt to configure more than one interface. <P> - -<H3><A NAME="invalid users">invalid users (S)</A></H3> -This is a list of users that should not be allowed to login to this service. -This is really a "paranoid" check to absolutely ensure an improper setting -does not breach your security. <P> -A name starting with @ is interpreted as a UNIX group. <P> -The current servicename is substituted for %S. This is useful in the [homes] -section. <P> -See also <A HREF="#valid users">valid users</A> <P> -<B>Default</B> No invalid users <P> -<B>Example</B> invalid users = root fred admin @wheel <P> - -<H3><A NAME="keepalive">keepalive (G)</A></H3> -The value of the parameter (an integer) represents the number of seconds -between 'keepalive' packets. If this parameter is zero, no keepalive packets -will be sent. Keepalive packets, if sent, allow the server to tell whether a -client is still present and responding. <P> -<B>Default:</B> keep alive = 300 <P> -<B>Example:</B> keep alive = 60 <P> - -<H3><A NAME="lm announce">lm announce (G)</A></H3> -This parameter determines if Samba will produce Lanman announce broadcasts -that are needed by OS/2 clients in order for them to see the Samba server in -their browse list. This parameter can have three values, True, False, or Auto. -The default is Auto. If set to False Samba will never produce these broadcasts. -If set to True Samba will produce Lanman announce broadcasts at a frequency -set by the parameter <A HREF="#lm interval">lm interval</A>. If set to Auto -Samba will not send Lanman announce broadcasts by default but will listen for -them. If it hears such a broadcast on the wire it will then start sending -them at a frequency set by the 'lm interval' parameter<P> -See also <A HREF="#lm interval">lm interval</A>. <P> -<B>Default:</B> lm announce = Auto <P> -<B>Example:</B> lm announce = True <P> - -<H3><A NAME="lm interval">lm interval (G)</A></H3> -If Samba is set to produce Lanman announce broadcasts needed by OS/2 clients -(see the <A HREF="#lm announce">lm announce</A> parameter) this -parameter defines the frequency in seconds with which they will be made. -If this is set to zero then no Lanman announcements will be made despite -the setting of the <A HREF="#lm announce">lm announce</A> parameter. <P> -See also <A HREF="#lm announce">lm announce</A>. <P> -<B>Default:</B> lm interval = 60 <P> -<B>Example:</B> lm interval = 120 <P> - -<H3><A NAME="load printers">load printers (G)</A></H3> -A boolean variable that controls whether all printers in the printcap -will be loaded for browsing by default. <P> -<B>Default:</B> load printers = Yes <P> -<B>Example:</B> load printers = No <P> - -<H3><A NAME="local master">local master (G)</A></H3> -This option allows nmbd to become a local master browser on a subnet. If set -to No then nmbd will not attempt to become a local master browser on a subnet -and will also lose in all browsing elections. By default this value is set -to Yes. Setting this value to Yes doesn't mean that Samba will become the local -master browser on a subnet, just that the nmbd will participate in elections -for local master browser. <P> -<B>Default:</B> local master = yes <P> - -<H3><A NAME="lock dir">lock dir (G)</A></H3> -This option specifies the directory where lock files will be placed. -The lock files are used to implement the -<A HREF="#max connections">max connections</A> option. <P> -<B>Default:</B> lock dir = /tmp/samba <P> -<B>Example:</B> lock dir = /usr/local/samba/var/locks <P> - -<H3><A NAME="locking">locking (S)</A></H3> -This controls whether or not locking will be performed by the server in -response to lock requests from the client. <P> -If set to No, all lock and unlock requests will appear to succeed and all -lock queries will indicate that the queried lock is clear. <P> -If set to Yes, real locking will be performed by the server. <P> -This option may be particularly useful for read-only filesystems which do not -need locking (such as CDROM drives). <P> -Be careful about disabling locking either globally or in a specific -service, as lack of locking may result in data corruption. <P> -<B>Default:</B> locking = Yes <P> -<B>Example:</B> locking = No <P> - -<H3><A NAME="log file">log file (G)</A></H3> -This options allows you to override the name of the Samba log file (also -known as the debug file). <P> -This option takes the standard substitutions, allowing you to have separate -log files for each user or machine. <P> -<B>Example:</B> log file = /usr/local/samba/var/log.%m <P> - -<H3><A NAME="log level">log level (G)</A></H3> -A synonym for this is debuglevel<P> -The value of the parameter (an integer) allows the logging level (debug level) -to be specified in the <B>smb.conf</B> file. This is to give greater -flexibility in the configuration of the system. <P> -The default will be the logging level specified on the command line. <P> -<B>Example:</B> log level = 3 - -<H3><A NAME="logon drive">logon drive (G)</A></H3> -This parameter specifies the local path to which the home directory will be -connected (see <A HREF="#logon home">logon home</A>) and is only used by NT -Workstations. <P> -<B>Example:</B> logon drive = h: <P> - -<H3><A NAME="logon home">logon home (G)</A></H3> -This parameter specifies the home directory location when a Win95 or NT -Workstation logs into a Samba PDC. It allows you to do "NET USE H: /HOME" -from a command prompt, for example. <P> -This option takes the standard substitutions, allowing you to have separate -logon scripts for each user or machine. <P> -<B>Default:</B> logon home = "\\%N\%U" <P> -<B>Example:</B> logon home = "\\remote_smb_server\%U" <P> - -<H3><A NAME="logon path">logon path (G)</A></H3> -This parameter specifies the home directory where roaming profiles (USER.DAT -/ USER.MAN files for Windows 95) are stored. <P> -This option takes the standard substitutions, allowing you to have separate -logon scripts for each user or machine. It also specifies the directory from -which the "desktop", "start menu", "nethood" and "programs" folders, and their -contents, are loaded and displayed on your Windows 95 client. <P> -The share and the path must be readable by the user for the preferences and -directories to be loaded onto the Windows 95 client. The share must be -writeable when the user logs in for the first time, in order that the -Windows 95 client can create the user.dat and other directories. <P> -Thereafter, the directories and any of contents can, if required, be -made read-only. It is not adviseable that the USER.DAT file be made read-only -- rename it to USER.MAN to achieve the desired effect (a MANdatory profile). <P> -Windows clients can sometimes maintain a connection to the [homes] share, -even though there is no user logged in. Therefore, it is vital that the -logon path does not include a reference to the homes share (i.e -\\%N\HOMESprofile_path will cause problems). <P> -This option takes the standard substitutions, allowing you to have separate -logon scripts for each user or machine. <P> -<B>Default:</B> logon path = \\%N\%U\profile <P> -<B>Example:</B> logon path = \\PROFILESERVER\HOME_DIR\%U\PROFILE <P> - -<H3><A NAME="logon script">logon script (G)</A></H3> -This parameter specifies the batch file (.bat) or NT command file (.cmd) to -be downloaded and run on a machine when a user successfully logs in. The file -must contain the DOS style cr/lf line endings. Using a DOS-style editor to -create the file is recommended. <P> -The script must be a relative path to the [netlogon] service. If the -[netlogon] service specifies a path of /usr/local/samba/netlogon, and logon -script = STARTUP.BAT, then file that will be downloaded is: <P> - <B>/usr/local/samba/netlogon/STARTUP.BAT</B> <P> -The contents of the batch file is entirely your choice. A suggested command -would be to add NET TIME \\SERVER /SET /YES, to force every machine to -synchronise clocks with the same time server. Another use would be to add -NET USE U: \\SERVER\UTILS for commonly used utilities, or -NET USE Q: \\SERVER\ISO9001_QA. <P> -Note that it is particularly important not to allow write access to the -[netlogon] share, or to grant users write permission on the batch files -in a secure environment, as this would allow the batch files to be arbitrarily -modified. <P> -This option takes the standard substitutions, allowing you to have separate -logon scripts for each user or machine. <P> -<B>Example:</B> logon script = scripts/%U.bat <P> - -<H3><A NAME="lppause command">lppause command (S)</A></H3> -This parameter specifies the command to be executed on the server host in -order to stop printing or spooling a specific print job. <P> -This command should be a program or script which takes a printer name and -job number to pause the print job. Currently I don't know of any print spooler -system that can do this with a simple option, except for the PPR system from -Trinity College (ppr-dist.trincoll.edu/pub/ppr). One way of implementing this -is by using job priorities, where jobs having a too low priority won't be -sent to the printer. See also -<A HREF="#lpresume command">lpresume command</A>.<P> -If a %p is given then the printername is put in its place. A %j is replaced -with the job number (an integer). On HPUX (see -<A HREF="#printing">printing</A>=hpux), if the -p%p -option is added to the lpq command, the job will show up with the correct -status, i.e. if the job priority is lower than the set fence priority it -will have the PAUSED status, whereas if the priority is equal or higher -it will have the SPOOLED or PRINTING status. <P> -Note that it is good practice to include the absolute path in the lppause -command as the PATH may not be available to the server. <P> -<B>Default:</B> Currently no default value is given to this string <P> -<B>Example for HPUX:</B> lppause command = /usr/bin/lpalt %p-%j -p0 <P> - -<H3><A NAME="lpq cache time">lpq cache time (G)</A></H3> -This controls how long lpq info will be cached for to prevent the lpq command -being called too often. A separate cache is kept for each variation of the -lpq command used by the system, so if you use different lpq commands for -different users then they won't share cache information. <P> -The cache files are stored in /tmp/lpq.xxxx where xxxx is a hash of the lpq -command in use. <P> -The default is 10 seconds, meaning that the cached results of a previous -identical lpq command will be used if the cached data is less than 10 seconds -old. A large value may be advisable if your lpq command is very slow. <P> -A value of 0 will disable cacheing completely. <P> -<B>Default:</B> lpq cache time = 10 <P> -<B>Example:</B> lpq cache time = 30 <P> - -<H3><A NAME="lpq command">lpq command (S)</A></H3> -This parameter specifies the command to be executed on the server host -in order to obtain "lpq"-style printer status information. <P> -This command should be a program or script which takes a printer name as its -only parameter and outputs printer status information. <P> -Currently six styles of printer status information are supported; BSD, SYSV, -AIX, HPUX, QNX, LPRNG and PLP. This covers most UNIX systems. You control -which type is expected using the <A HREF="#printing">printing</A> option. <P> -Some clients (notably Windows for Workgroups) may not correctly send the -connection number for the printer they are requesting status information -about. To get around this, the server reports on the first printer service -connected to by the client. This only happens if the connection number sent -is invalid. <P> -If a %p is given then the printername is put in its place. Otherwise it is -placed at the end of the command. <P> -Note that it is good practice to include the absolute path in the lpq -command as the PATH may not be available to the server. <P> -<B>Default:</B> depends on the setting of <A HREF="#printing">printing</A><P> -<B>Example:</B> lpq command = /usr/bin/lpq %p <P> - -<H3><A NAME="lpresume command">lpresume command (S)</A></H3> -This parameter specifies the command to be executed on the server host in -order to restart or continue printing or spooling a specific print job. <P> -This command should be a program or script which takes a printer name and -job number to resume the print job. See also the -<A HREF="#lppause command">lppause command</A>. <P> -If a %p is given then the printername is put in its place. -A %j is replaced with the job number (an integer). <P> -Note that it is good practice to include the absolute path in the lpresume -command as the PATH may not be available to the server. <P> -<B>Default:</B> Currently no default value is given to this string <P> -<B>Example for HPUX:</B> lpresume command = /usr/bin/lpalt %p-%j -p2 <P> - -<H3><A NAME="lprm command">lprm command (S)</A></H3> -This parameter specifies the command to be executed on the server host in -order to delete a print job. <P> -This command should be a program or script which takes a printer name -and job number, and deletes the print job. <P> -Currently seven styles of printer control are supported; BSD, SYSV, AIX HPUX, -QNX, LPRNG and PLP. This covers most UNIX systems. You control which type is -expected using the <A HREF="#printing">printing</A> option. <P> -If a %p is given then the printername is put in its place. A -%j is replaced with the job number (an integer). <P> -Note that it is good practice to include the absolute path in the lprm -command as the PATH may not be available to the server. <P> -<B>Default:</B> depends on the setting of <A HREF="#printing">printing</A><P> -<B>Example 1:</B>lprm command = /usr/bin/lprm -P%p %j <P> -<B>Example 2:</B>lprm command = /usr/bin/cancel %p-%j <P> - -<H3><A NAME="magic output">magic output (S)</A></H3> -This parameter specifies the name of a file which will contain output -created by a magic script (see <A HREF="#magic script">magic script</A> -below). <P> -Warning: If two clients use the same magic script in the same directory the -output file content is undefined. <P> -<B>Default:</B> magic output = <magic script name>.out <P> -<B>Example:</B> magic output = myfile.txt <P> - -<H3><A NAME="magic script">magic script (S)</A></H3> -This parameter specifies the name of a file which, if opened, will be -executed by the server when the file is closed. This allows a UNIX script to -be sent to the Samba host and executed on behalf of the connected user. <P> -Scripts executed in this way will be deleted upon completion, permissions -permitting. <P> -If the script generates output, output will be sent to the file specified by -the <A HREF="#magic output">magic output</A> parameter. <P> -Note that some shells are unable to interpret scripts containing -carriage-return-linefeed instead of linefeed as the end-of-line marker. Magic -scripts must be executable "as is" on the host, which for some hosts and -some shells will require filtering at the DOS end. <P> -Magic scripts are EXPERIMENTAL and should NOT be relied upon. <P> -<B>Default:</B> None. Magic scripts disabled. <P> -<B>Example:</B> magic script = user.csh <P> - -<H3><A NAME="mangle case">mangle case (S)</A></H3> -Controls if names that have characters that aren't of the "default" case are -mangled. <P> -See the section on <A HREF="#NAME MANGLING">NAME MANGLING</A> <P> - -<H3><A NAME="mangled map">mangled map (S)</A></H3> -This is for those who want to directly map UNIX file names which are not -representable on DOS. The mangling of names is not always what is needed. In -particular you may have documents with file extensions that differ between -DOS and UNIX. For example, under UNIX it is common to use .html for HTML -files, whereas under DOS .htm is more commonly used. <P> -So to map 'html' to 'htm' you put: <P> -mangled map = (*.html *.htm) <P> -One very useful case is to remove the annoying ;1 off the ends of filenames -on some CDROMS (only visible under some UNIXes). To do this use a map of -(*;1 *) <P> -<B>default:</B> no mangled map <P> -<B>Example:</B> mangled map = (*;1 *) <P> - -<H3><A NAME="mangled names">mangled names (S)</A></H3> -This controls whether non-DOS names under UNIX should be mapped -to DOS-compatible names ("mangled") and made visible, or whether non-DOS -names should simply be ignored. <P> -See the section on <A HREF="#NAME MANGLING">NAME MANGLING</A> for -details on how to control the mangling process. <P> -If mangling is used then the mangling algorithm is as follows: -<blockquote>- the first (up to) five alphanumeric characters before the -rightmost dot of the filename are preserved, forced to upper case, and appear -as the first (up to) five characters of the mangled name. <P> -- a tilde ("~") is appended to the first part of the mangled name, followed -by a two-character unique sequence, based on the original root name (i.e., -the original filename minus its final extension). The final -extension is included in the hash calculation only if it contains any -upper case characters or is longer than three characters. <P> -Note that the character to use may be specified using the -<A HREF="#mangling char">mangling char</A> option, if you don't like ~. <P> -- the first three alphanumeric characters of the final -extension are preserved, forced to upper case and appear as the extension -of the mangled name. The final extension is defined as that part of the -original filename after the rightmost dot. If there are no dots in the -filename, the mangled name will have no extension (except in the case -of hidden files - see below). <P> -- files whose UNIX name begins with a dot will be presented as DOS hidden -files. The mangled name will be created as for other filenames, but with the -leading dot removed and "___" as its extension regardless of actual original -extension (that's three underscores). -</blockquote> -The two-digit hash value consists of upper case alphanumeric characters. <P> -This algorithm can cause name collisions only if files in a directory -share the same first five alphanumeric characters. The probability of such -a clash is 1/1300. <P> -The name mangling (if enabled) allows a file to be copied between UNIX -directories from DOS while retaining the long UNIX filename. UNIX files can -be renamed to a new extension from DOS and will retain the same basename. -Mangled names do not change between sessions. <P> -<B>Default:</B> mangled names = Yes <P> -<B>Example:</B> mangled names = No <P> - -<H3><A NAME="mangling char">mangling char (S)</A></H3> -This controls what character is used as the "magic" character -in name mangling. The default is a ~ but this may interfere with some software. -Use this option to set it to whatever you prefer. <P> -<B>Default:</B> mangling char = ~ <P> -<B>Example:</B> mangling char = ^ <P> - -<H3><A NAME="mangled stack">mangled stack (G)</A></H3> -This parameter controls the number of mangled names that should be cached in -the Samba server. <P> -This stack is a list of recently mangled base names (extensions are only -maintained if they are longer than 3 characters or contains upper case -characters). <P> -The larger this value, the more likely it is that mangled -names can be successfully converted to correct long UNIX names. However, -large stack sizes will slow most directory access. Smaller stacks save -memory in the server (each stack element costs 256 bytes). <P> -It is not possible to absolutely guarantee correct long file names, so be -prepared for some surprises! <P> -<B>Default:</B> mangled stack = 50 <P> -<B>Example:</B> mangled stack = 100 <P> - -<H3><A NAME="map archive">map archive (S)</A></H3> -This controls whether the DOS archive attribute should -be mapped to the UNIX owner execute bit. The DOS archive bit is set when -a file has been modified since its last backup. One motivation for this -option it to keep Samba/your PC from making any file it touches from becoming -executable under UNIX. This can be quite annoying for shared source code, -documents, etc... <P> -Note that this requires the 'create mask' to be set such -that owner execute bit is not masked out (ie. it must include 100). See -the parameter <A HREF="#create mask">create mask</A> for details. <P> -<B>Default:</B> map archive = Yes <P> -<B>Example:</B> map archive = No <P> - -<H3><A NAME="map hidden">map hidden (S)</A></H3> -This controls whether DOS style hidden files should be mapped to the UNIX -world execute bit. <P> -Note that this requires the 'create mask' to be set such that the world -execute bit is not masked out (ie. it must include 001). See the parameter -<A HREF="#create mask">create mask</A> for details. <P> -<B>Default:</B> map hidden = No <P> -<B>Example:</B> map hidden = Yes <P> - -<H3><A NAME="map system">map system (S)</A></H3> -This controls whether DOS style system files should be mapped to the UNIX -group execute bit. <P> -Note that this requires the 'create mask' to be set such that the group -execute bit is not masked out (ie. it must include 010). See the parameter -<A HREF="#create mask">create mask</A> for details. <P> -<B>Default:</B> map system = No <P> -<B>Example:</B> map system = Yes <P> - -<H3><A NAME="max connections">max connections (S)</A></H3> -This option allows the number of simultaneous connections to a service to be -limited. If "max connections" is greater than 0 then connections will be -refused if this number of connections to the service are already open. A value -of zero mean an unlimited number of connections may be made. <P> -Record lock files are used to implement this feature. The lock files will be -stored in the directory specified by the -<A HREF="#lock dir">lock dir</A> option. <P> -<B>Default:</B> max connections = 0 <P> -<B>Example:</B> max connections = 10 <P> - -<H3><A NAME="max disk size">max disk size (G)</A></H3> -This option allows you to put an upper limit on the apparent size of disks. -If you set this option to 100 then all shares will appear to be not larger -than 100 MB in size. <P> -Note that this option does not limit the amount of data you can put on the -disk. In the above case you could still store much more than 100 MB on the -disk, but if a client ever asks for the amount of free disk space or the -total disk size then the result will be bounded by the amount specified in -"max disk size". <P> -This option is primarily useful to work around bugs in some pieces of -software that can't handle very large disks, particularly disks over 1GB in -size. <P> -A "max disk size" of 0 means no limit. <P> -<B>Default:</B> max disk size = 0 <P> -<B>Example:</B> max disk size = 1000 <P> - -<H3><A NAME="max log size">max log size (G)</A></H3> -This option (an integer in kilobytes) specifies the max size -the log file should grow to. Samba periodically checks the size and if -it is exceeded it will rename the file, adding a .old extension. <P> -A size of 0 means no limit. <P> -<B>Default:</B> max log size = 5000 <P> -<B>Example:</B> max log size = 1000 <P> - -<H3><A NAME="max mux">max mux (G)</A></H3> -This option controls the maximum number of outstanding simultaneous SMB -operations that samba tells the client it will allow. You should never need -to set this parameter. <P> -<B>Default:</B> max mux = 50 <P> - -<H3><A NAME="max packet">max packet (G)</A></H3> -A synonym for this parameter is 'packet size'. <P> -The maximum transmit packet size during a raw read. This option is no longer -implemented as of version 1.7.00, and is kept only so old configuration files -do not become invalid. <P> - -<H3><A NAME="max ttl">max ttl (G)</A></H3> -This option tells nmbd what the default 'time to live' of NetBIOS names should -be (in seconds) when nmbd is requesting a name using either a broadcast -or from a WINS server. You should never need to change this parameter. <P> -<B>Default:</B> max ttl = 14400 <P> - -<H3><A NAME="max wins ttl">max wins ttl (G)</A></H3> -This option tells nmbd when acting as a WINS server -(<A HREF="#wins support">wins support</A> = Yes) what the maximum 'time to -live' of NetBIOS names that nmbd will grant will be (in seconds). You should -never need to change this parameter. The default is 3 days (259200 -seconds). <P> -<B>Default:</B> max wins ttl = 259200 <P> - -<H3><A NAME="max xmit">max xmit (G)</A></H3> -This option controls the maximum packet size that will be negotiated by -Samba. The default is 65535, which is the maximum. In some cases you may find -you get better performance with a smaller value. A value below 2048 is likely -to cause problems. <P> -<B>Default:</B> max xmit = 65535 <P> -<B>Example:</B> max xmit = 8192 <P> - -<H3><A NAME="message command">message command (G)</A></H3> -This specifies what command to run when the server receives a WinPopup style -message. <P> -This would normally be a command that would deliver the message somehow. -How this is to be done is up to your imagination. <P> -What I use is: <P> -message command = csh -c 'xedit %s;rm %s' & <P> -This delivers the message using xedit, then removes it afterwards. NOTE -THAT IT IS VERY IMPORTANT THAT THIS COMMAND RETURN IMMEDIATELY. That's why -I have the & on the end. If it doesn't return immediately then your PCs may -freeze when sending messages (they should recover after 30secs, hopefully). <P> -All messages are delivered as the global guest user. The command takes -the standard substitutions, although %u won't work (%U may be better in -this case). <P> -Apart from the standard substitutions, some additional ones apply. In -particular: <P> -%s = the filename containing the message <P> -%t = the destination that the message was sent to (probably the server name) <P> -%f = who the message is from <P> -You could make this command send mail, or whatever else takes your fancy. -Please let me know of any really interesting ideas you have. <P> -Here's a way of sending the messages as mail to root: <P> -message command = /bin/mail -s 'message from %f on %m' root < %s; rm %s <P> -If you don't have a message command then the message won't be delivered and -Samba will tell the sender there was an error. Unfortunately WfWg totally -ignores the error code and carries on regardless, saying that the message was -delivered. <P> -If you want to silently delete it then try "message command = rm %s". <P> -For the really adventurous, try something like this: <P> -message command = csh -c 'csh < %s |& /usr/local/samba/bin/smbclient \ - -M %m; rm %s' & <P> -this would execute the command as a script on the server, -then give them the result in a WinPopup message. Note that this could cause -a loop if you send a message from the server using smbclient! You better -wrap the above in a script that checks for this :-) <P> -<B>Default:</B> no message command <P> -<B>Example:</B> message command = csh -c 'xedit %s;rm %s' & <P> - -<H3><A NAME="min print space">min print space (S)</A></H3> -This sets the minimum amount of free disk space that must -be available before a user will be able to spool a print job. It is specified -in kilobytes. The default is 0, which means no limit. <P> -<B>Default:</B> min print space = 0 <P> -<B>Example:</B> min print space = 2000 <P> - -<H3><A NAME="min wins ttl">min wins ttl (G)</A></H3> -This option tells nmbd when acting as a WINS server -(<A HREF="#wins support">wins support</A> = Yes) what the -minimum 'time to live' of NetBIOS names that nmbd will grant will be (in -seconds). You should never need to change this parameter. The default is -6 hours (21600 seconds). <P> -<B>Default:</B> min wins ttl = 21600 <P> - -<H3><A NAME="name resolve order">name resolve order (G)</A></H3> -This option is used by the programs smbd, nmbd and smbclient -to determine what naming services and in what order to resolve host names -to IP addresses. This option is most useful in smbclient. The option takes -a space separated string of different name resolution options. These are -"lmhosts", "host", "wins" and "bcast". They cause names to be resolved -as follows : <P> -<pre> -lmhosts Lookup an IP address in the Samba lmhosts file. -host Do a standard host name to IP address resolution, using the - system /etc/hosts, NIS, or DNS lookups. This method of name - resolution is operating system depended (for instance on Solaris - this may be controlled by the /etc/nsswitch.conf file). -wins Query a name with the IP address listed in the "wins server =" - parameter. If no WINS server has been specified this method will - be ignored. -bcast Do a broadcast on each of the known local - interfaces listed in the "interfaces =" parameter. This is the - least reliable of the name resolution methods as it depends - on the target host being on a locally connected subnet. -</pre> -The default order is lmhosts, host, wins, bcast and these name resolution -methods will be attempted in this order. <P> -This option was first introduced in Samba 1.9.18p4. <P> -<B>Default:</B> name resolve order = lmhosts host wins bcast <P> -<B>example:</B> name resolve order = lmhosts bcast host <P> -This will cause the local lmhosts file to be examined first, followed by a -broadcast attempt, followed by a normal system hostname lookup. <P> - -<H3><A NAME="netbios aliases">netbios aliases (G)</A></H3> -This is a list of names that nmbd will advertise as additional names by which -the Samba server is known. This allows one machine to appear in browse -lists under multiple names. If a machine is acting as a browse server or -logon server none of these names will be advertised as either browse server -or logon servers, only the primary name of the machine will be advertised -with these capabilities. <P> -See also <A HREF="#netbios name">netbios name</A>. <P> -<B>Example:</B>netbios aliases = TEST TEST1 TEST2 <P> - -<H3><A NAME="netbios name">netbios name (G)</A></H3> -This sets the NetBIOS name by which a Samba server is known. By default it is -the same as the first component of the host's DNS name. If a machine is a -browse server or logon server this name (or the first component of the hosts -DNS name) will be the name that these services are advertised under. <P> -See also <A HREF="#netbios aliases">netbios aliases</A>. <P> -<B>Example:</B> netbios name = MYNAME <P> - -<H3><A NAME="NIS homedir">NIS homedir (G)</A></H3> -Get the home share server from a NIS (or YP) map. For unix systems that use -an automounter, the user's home directory will often be mounted on a -workstation on demand from a remote server. When the Samba logon server is -not the actual home directory server, two network hops are required to access -the home directory and this can be very slow especially with writing via -Samba to an NFS mounted directory. This option allows samba to return the -home share as being on a different server to the logon server and as long as -a samba daemon is running on the home directory server, it will be mounted -on the Samba client directly from the directory server. When Samba is -returning the home share to the client, it will consult the NIS (or YP) map -specified in <A HREF="#homedir map">homedir map</A> and return the server -listed there. <P> -<B>Default:</B> NIS homedir = No <P> -<B>Example:</B> NIS homedir = Yes <P> - -<H3><A NAME="networkstation user login">networkstation user login (G)</A></H3> -This global parameter (new for 1.9.18p3) affects server level security. With -this set (recommended) samba will do a full NetWkstaUserLogon to confirm that -the client really should have login rights. This can cause problems with -machines in trust relationships in which case you can disable it here, -but be warned, we have heard that some NT machines will then allow anyone -in with any password! Make sure you test it. <P> -<B>Default:</B> networkstation user login = Yes <P> -<B>Example:</B> networkstation user login = No <P> - -<H3><A NAME="null passwords">null passwords (G)</A></H3> -Allow or disallow access to accounts that have null passwords. <P> -<B>Default:</B> null passwords = No <P> -<B>Example:</B> null passwords = Yes <P> - -<H3><A NAME="only user">only user (S)</A></H3> -This is a boolean option that controls whether connections with usernames not -in the <A HREF="#username">username</A> list will be allowed. By default this -option is disabled so a client can supply a username to be used by the -server. <P> -Note that this also means Samba won't try to deduce usernames from the -service name. This can be annoying for the [homes] section. To get around -this you could use "<A HREF="#username">username</A> = %S" which means your -"username" list will be just the service name, which for home directories -is the name of the user. <P> -<B>Default: </B> only user = No <P> -<B>Example: </B> only user = Yes <P> - -<H3><A NAME="oplocks">oplocks (S)</A></H3> -This boolean option tells smbd whether to issue oplocks (opportunistic locks) -to file open requests on this share. The oplock code -was introduced in Samba 1.9.18 and can dramatically (approx 30% or more) -improve the speed of access to files on Samba servers. It allows the clients -to agressively cache files locally and you may want to disable this option -for unreliable network environments (it is turned on by default in Windows -NT Servers). For more information see the file Speed.txt in the Samba docs/ -directory. <P> -Oplocks may be selectively turned off on certain files on a per share basis. -See the <A HREF="#veto oplock files">veto oplock files</A> parameter. <P> -<B>Default:</B> oplocks = Yes <P> -<B>Example:</B> oplocks = No <P> - -<H3><A NAME="os level">os level (G)</A></H3> -This integer value controls what level Samba advertises itself as for browse -elections. See BROWSING.txt for details. <P> - -<H3><A NAME="passwd chat debug">passwd chat debug (G)</A></H3> -This boolean specifies if the passwd chat script parameter is run -in 'debug' mode. In this mode the strings passed to and received from the -passwd chat are printed in the smbd log with a debug level of 100. This -is a dangerous option as it will allow plaintext passwords to be seen -in the smbd log. It is available to help Samba admins debug their passwd -chat scripts and should be turned off after this has been done. This parameter -is off by default. <P> -<B>Example:</B> passwd chat debug = Yes <P> -<B>Default:</B> passwd chat debug = No <P> - -<H3><A NAME="passwd chat">passwd chat (G)</A></H3> -This string controls the "chat" conversation that takes places -between smbd and the local password changing program to change the users -password. The string describes a sequence of response-receive pairs that -smbd uses to determine what to send to the passwd program and what to -expect back. If the expected output is not received then the password is -not changed. <P> -This chat sequence is often quite site specific, depending -on what local methods are used for password control (such as NIS+ etc). <P> -The string can contain the macros %o and %n which are substituted for -the old and new passwords respectively. It can also contain the standard -macros \n \r \t and \s to give line-feed, carriage-return, tab and space. <P> -The string can also contain a * which matches any sequence of characters. <P> -Double quotes can be used to collect strings with spaces in them into -a single string. <P> -If the send string in any part of the chat sequence is -a fullstop "." then no string is sent. Similarly, is the expect string is -a fullstop then no string is expected. <P> -<B>Default:</B> passwd chat = *old*password* %o\n *new*password* %n\n *new*password* %n\n *changed* <P> -<B>Example:</B> passwd chat = "*Enter OLD password*" %o\n "*Enter NEW password*" %n\n \ - "*Reenter NEW password*" %n\n "*Password changed*" <P> - -<H3><A NAME="passwd program">passwd program (G)</A></H3> -The name of a program that can be used to set user passwords. <P> -This is only necessary if you have enabled remote password changing at -compile time. Any occurrences of %u will be replaced with the user name. <P> -Also note that many passwd programs insist in "reasonable" -passwords, such as a minimum length, or the inclusion of mixed case chars -and digits. This can pose a problem as some clients (such as Windows for -Workgroups) uppercase the password before sending it. <P> -<B>Default:</B> passwd program = /bin/passwd <P> -<B>Example:</B> passwd program = /sbin/passwd %u <P> - -<H3><A NAME="password level">password level (G)</A></H3> -Some client/server combinations have difficulty with mixed-case -passwords. One offending client is Windows for Workgroups, which for some -reason forces passwords to upper case when using the LANMAN1 protocol, -but leaves them alone when using COREPLUS! <P> -This parameter defines the maximum number of characters that may be upper -case in passwords. <P> -For example, say the password given was "FRED". If password level is set to -1 (one), the following combinations would be tried if "FRED" failed: "Fred", -"fred", "fRed", "frEd", "freD". If password level was set to 2 (two), the -following combinations would also be tried: "FRed", "FrEd", "FreD", "fREd", -"fReD", "frED". And so on. <P> -The higher value this parameter is set to the more likely it is that a mixed -case password will be matched against a single case password. However, you -should be aware that use of this parameter reduces security and increases the -time taken to process a new connection. <P> -A value of zero will cause only two attempts to be made - the password -as is and the password in all-lower case. <P> -If you find the connections are taking too long with this option then you -probably have a slow crypt() routine. Samba now comes with a fast "ufc crypt" -that you can select in the Makefile. You should also make sure the -PASSWORD_LENGTH option is correct for your system in local.h and includes.h. -On most systems only the first 8 chars of a password are significant so -PASSWORD_LENGTH should be 8, but on some longer passwords are significant. -The includes.h file tries to select the right length for your system. <P> -<B>Default:</B> password level = 0 <P> -<B>Example:</B> password level = 4 <P> - -<H3><A NAME="password server">password server (G)</A></H3> -By specifying the name of another SMB server (such as a WinNT box) with this -option, and using "<A HREF="#security">security</A> = server" you can get -Samba to do all its username/password validation via a remote server. <P> -This options sets the name of the password server to use. It must be a netbios -name, so if the machine's netbios name is different from its internet name -then you may have to add its netbios name to /etc/hosts. <P> -Note that with Samba 1.9.18p4 and above the name of the password server is -looked up using the <A HREF="#name resolve order">name resolve order</A> -parameter and so may resolved by any method and order described in that -parameter. <P> -The password server much be a machine capable of using the "LM1.2X002" -or the "LM NT 0.12" protocol, and it must be in user level security mode. <P> -NOTE: Using a password server means your UNIX box (running Samba) is -only as secure as your password server. DO NOT CHOOSE A PASSWORD SERVER -THAT YOU DON'T COMPLETELY TRUST. <P> -Never point a Samba server at itself for password serving. This will cause a -loop and could lock up your Samba server! <P> -The name of the password server takes the standard substitutions, but -probably the only useful one is %m, which means the Samba server will -use the incoming client as the password server. If you use this then you -better trust your clients, and you better restrict them with -<A HREF="#hosts allow">hosts allow</A>! <P> -If you list several hosts in the "password server" option then smbd will -try each in turn till it finds one that responds. This is useful in case -your primary server goes down. <P> -If you are using a WindowsNT server as your password server then you will -have to ensure that your users are able to login from the Samba server, as -the network logon will appear to come from there rather than from the users -workstation. <P> - -<H3><A NAME="path">path (S)</A></H3> -A synonym for this parameter is "directory". <P> -This parameter specifies a directory to which the user of the service is to -be given access. In the case of printable services, this is where print data -will spool prior to being submitted to the host for printing. <P> -For a printable service offering guest access, the service should be readonly -and the path should be world-writable and have the sticky bit set. This is -not mandatory of course, but you probably won't get the results you expect if -you do otherwise. <P> -Any occurrences of %u in the path will be replaced with the username that the -client is connecting as. Any occurrences of %m will be replaced by the name -of the machine they are connecting from. These replacements are very useful -for setting up pseudo home directories for users. <P> -Note that this path will be based on -<A HREF="#root directory">root directory</A> if one was specified.<P> -<B>Default:</B> none <P> -<B>Example:</B> path = /home/fred <P> - -<H3><A NAME="postexec">postexec (S)</A></H3> -This option specifies a command to be run whenever the -service is disconnected. It takes the usual substitutions. The command may -be run as the root on some systems. <P> -An interesting example may be do unmount server resources: <P> -postexec = /etc/umount /cdrom <P> -See also <A HREF="#preexec">preexec</A> <P> -<B>Default:</B> none (no command executed) <P> -<B>Example:</B> postexec = echo \"%u disconnected from %S from %m (%I)\" >> /tmp/log <P> - -<H3><A NAME="postscript">postscript (S)</A></H3> -This parameter forces a printer to interpret the print files as postscript. -This is done by adding a %! to the start of print output. <P> -This is most useful when you have lots of PCs that persist in putting a -control-D at the start of print jobs, which then confuses your printer. <P> -<B>Default:</B> postscript = No <P> -<B>Example:</B> postscript = Yes <P> - -<H3><A NAME="preferred master">preferred master (G)</A></H3> -This boolean parameter controls if Samba is a preferred master browser for -its workgroup. If this is set to Yes, on startup, samba will force an -election, and it will have a slight advantage in winning the election. -It is recommended that this parameter is used in conjunction with -<A HREF="#domain master">domain master</A> = yes, so that samba can guarantee -becoming a domain master. <P> -Use this option with caution, because if there are several hosts (whether -samba servers, Windows 95 or NT) that are preferred master browsers on -the same subnet, they will each periodically and continuously attempt -to become the local master browser. This will result in unnecessary broadcast -traffic and reduced browsing capabilities. <P> -See <A HREF="#os level">os level</A> = nn <P> -<B>Default:</B> preferred master = no <P> - -<H3><A NAME="preload">preload</A></H3> -An alias is "auto services". This is a list of services that you want to be -automatically added to the browse lists. This is most useful for homes and -printers services that would otherwise not be visible. <P> -Note that if you just want all printers in your printcap file loaded then the -<A HREF="#load printers">load printers</A> option is easier. <P> -<B>Default:</B> no preloaded services <P> -<B>Example:</B> preload = fred lp colorlp <P> - -<H3><A NAME="preserve case">preserve case (S)</A></H3> -This controls if new filenames are created with the case that -the client passes, or if they are forced to be the "default" case. <P> -<B>Default:</B> preserve case = no <P> -See the section on <A HREF="#NAME MANGLING">NAME MANGLING</A> for a fuller -discussion. <P> - -<H3><A NAME="print command">print command (S)</A></H3> -After a print job has finished spooling to a service, this command will be -used via a system() call to process the spool file. Typically the command -specified will submit the spool file to the host's printing subsystem, but -there is no requirement that this be the case. The server will not remove -the spool file, so whatever command you specify should remove the spool file -when it has been processed, otherwise you will need to manually remove old -spool files. <P> -The print command is simply a text string. It will be used verbatim, with -two exceptions: All occurrences of "%s" will be replaced by the appropriate -spool file name, and all occurrences of "%p" will be replaced by the -appropriate printer name. The spool file name is generated automatically by -the server, the <A HREF="#printer name">printer name</A> is discussed below. <P> -The full path name will be used for the filename if %s is not preceded by a -/. If you don't like this (it can stuff up some lpq output) then use %f -instead. Any occurrences of %f get replaced by the spool filename without -the full path at the front. <P> -The print command MUST contain at least one occurrence of "%s" or %f - -the "%p" is optional. At the time a job is submitted, if no printer name is -supplied the "%p" will be silently removed from the printer command. <P> -If specified in the [global] section, the print command given will be used for -any printable service that does not have its own print command specified.<P> -If there is neither a specified print command for a printable service nor a -global print command, spool files will be created but not processed and (most -importantly) not removed. <P> -Note that printing may fail on some UNIXes from the "nobody" account. If this -happens then create an alternative guest account that can print and set the -<A HREF="#guest account">guest account</A> in the [global] section. <P> -You can form quite complex print commands by realising that they are -just passed to a shell. For example the following will log a print job, -print the file, then remove it. Note that ; is the usual separator for -command in shell scripts. <P> -print command = echo Printing %s >> /tmp/print.log; lpr -P %p %s; rm %s<P> -You may have to vary this command considerably depending on how you normally -print files on your system. <P> -<B>Default:</B> print command = lpr -r -P %p %s <P> -<B>Example:</B>print command = /usr/local/samba/bin/myprintscript %p %s <P> - -<H3><A NAME="print ok">print ok (S)</A></H3> -A synonym for this parameter is 'printable'. <P> -If this parameter is 'Yes', then clients may open, write to -and submit spool files on the directory specified for the service. <P> -Note that a printable service will ALWAYS allow writing to the service path -(user privileges permitting) via the spooling of print data. The -<A HREF="#read only">read only</A> parameter controls only non-printing -access to the resource. <P> -<B>Default:</B> print ok = No <P> -<B>Example:</B> print ok = Yes <P> - -<H3><A NAME="printcap name">printcap name (G)</A></H3> -This parameter may be used to override the compiled-in default printcap name -used by the server (usually /etc/printcap). On SystemV systems that -use lpstat to list available printers you can use "printcap name = lpstat" -to automatically obtain lists of available printers. This is the default -for systems that define SYSV at compile time in Samba (this includes -most SystemV based systems). If "printcap name" is set to lpstat on these -systems then Samba will launch "lpstat -v" and attempt to parse the output -to obtain a printer list. <P> -A minimal printcap file would look something like this: <P> -print1|My Printer 1 <BR> -print2|My Printer 2 <BR> -print3|My Printer 3 <BR> -print4|My Printer 4 <BR> -print5|My Printer 5 <P> -where the | separates aliases of a printer. The fact that the second alias -has a space in it gives a hint to Samba that it's a comment. <P> -NOTE: Under AIX the default printcap name is "/etc/qconfig". -Samba will assume the file is in AIX "qconfig" format if the string "/qconfig" -appears in the printcap filename. <P> -<B>Default:</B> printcap name = /etc/printcap <P> -<B>Example:</B> printcap name = /etc/myprintcap <P> - -<H3><A NAME="printer driver">printer driver (S)</A></H3> -This option allows you to control the string that clients receive when they -ask the server for the printer driver associated with a printer. If you are -using Windows95 or WindowsNT then you can use this to automate the setup of -printers on your system. <P> -You need to set this parameter to the exact string (case sensitive) that -describes the appropriate printer driver for your system. If you don't know -the exact string to use then you should first try with no "printer driver" -option set and the client will give you a list of printer drivers. The -appropriate strings are shown in a scrollbox after you have chosen the -printer manufacturer. <P> -<B>Example:</B> printer driver = HP LaserJet 4L <P> - -<H3><A NAME="printer name">printer name (S)</A></H3> -A synonym for this parameter is 'printer'. <P> -This parameter specifies the name of the printer to which print jobs spooled -through a printable service will be sent. <P> -If specified in the [global] section, the printer name given will be used for -any printable service that does not have its own printer name specified. <P> -<B>Default:</B> none (but may be 'lp' on many systems) <P> -<B>Example:</B> printer name = laserwriter <P> - -<H3><A NAME="printer driver file">printer driver file (G)</A></H3> -This parameter tells Samba where the printer driver definition file, used -when serving drivers to Windows 95 clients, is to be found. If this is not -set, the default is : <P> -SAMBA_INSTALL_DIRECTORY/lib/printers.def <P> -This file is created from Windows 95 'msprint.def' files found on the Windows -95 client system. For more details on setting up serving of printer drivers -to Windows 95 clients, see the documentation file docs/PRINTER_DRIVER.txt. <P> -<B>Default:</B> None (set in compile). <P> -<B>Example:</B> printer driver file = /usr/local/samba/printers/drivers.def <P> -Related parameters. -<A HREF="#printer driver location">printer driver location</A> <P> - -<H3><A NAME="printer driver location">printer driver location (S)</A></H3> -This parameter tells clients of a particular printer share where to find the -printer driver files for the automatic installation of drivers for Windows 95 -machines. If Samba is set up to serve printer drivers to Windows 95 machines, -this should be set to <P> -\\MACHINE\PRINTER$ <P> -Where MACHINE is the NetBIOS name of your Samba -server, and PRINTER$ is a share you set up for serving printer driver -files. For more details on setting this up see the documentation file -docs/PRINTER_DRIVER.txt. <P> -<B>Default:</B> None <P> -<B>Example:</B> printer driver location = \\MACHINE\PRINTER$ <P> -Related paramerers. -<A HREF="#printer driver file">printer driver file</A><P> - -<H3><A NAME="printing">printing (S)</A></H3> -This parameters controls how printer status information is interpreted -on your system, and also affects the default values for the -<A HREF="#print command">print command</A>, -<A HREF="#lpq command">lpq command</A> and -<A HREF="#lprm command">lprm command</A>. <P> -Currently six printing styles are supported. They are bsd, sysv, hpux, aix, -qnx and plp. <P> -To see what the defaults are for the other print commands when using these -options use the "testparm" program. <P> -As of version 1.9.18 of Samba this option can be set on a per printer basis <P> -<B>Example:</B> printing = sysv <P> - -<H3><A NAME="protocol">protocol (G)</A></H3> -The value of the parameter (a string) is the highest protocol level that will -be supported by the server. <P> -Possible values are CORE, COREPLUS, LANMAN1, LANMAN2 and NT1. The relative -merits of each are discussed in the README file. <P> -Normally this option should not be set as the automatic negotiation phase in -the SMB protocol takes care of choosing the appropriate protocol. <P> -<B>Default:</B> protocol = NT1 <P> -<B>Example:</B> protocol = LANMAN1 <P> - -<H3><A NAME="read bmpx">read bmpx (S)</A></H3> -<B>Default:</B> read bmpx = Yes <P> - -<H3><A NAME="read list">read list (S)</A></H3> -This is a list of users that are given read-only access to a service. -If the connecting user is in this list then they will not be given write -access, no matter what the <A HREF="#read only">read only</A> option is set -to. The list can include group names using the @group syntax. <P> -See also the <A HREF="#write list">write list</A> option <P> -<B>Default:</B> read list = <P> -<B>Example:</B> read list = mary, @students <P> - -<H3><A NAME="read only">read only (S)</A></H3> -Inverted synonyms for this parameter are 'writable' and 'write ok'. <P> -If this parameter is 'Yes', then users of the service may not create or -modify files in the service's directory. <P> -Note that a printable service ('<A HREF="#printable">printable</A> = Yes') -will ALWAYS allow writing to the directory (user privileges permitting), but -only via spooling operations. <P> -<B>Default:</B> read only = Yes <P> -<B>Examples:</B> read only = No <BR> -writable = No <BR> -write ok = Yes <P> - -<H3><A NAME="read prediction">read prediction (G)</A></H3> -This options enables or disables the read prediction code used to speed up -reads from the server. When enabled the server will try to pre-read data -from the last accessed file that was opened read-only while waiting for -packets. <P> -<B>Default:</B> read prediction = No <P> -<B>Example:</B> read prediction = Yes <P> - -<H3><A NAME="read raw">read raw (G)</A></H3> -This parameter controls whether or not the server will support raw reads when -transferring data to clients. <P> -If enabled, raw reads allow reads of 65535 bytes in one packet. This typically -provides a major performance benefit. <P> -However, some clients either negotiate the allowable block size incorrectly -or are incapable of supporting larger block sizes, and for these clients you -may need to disable raw reads. <P> -In general this parameter should be viewed as a system tuning tool and left -severely alone. See also <A HREF="#write raw">write raw.</A> <P> -<B>Default:</B> read raw = Yes <P> -<B>Example:</B> read raw = No <P> - -<H3><A NAME="read size">read size (G)</A></H3> -The option "read size" affects the overlap of disk reads/writes with network -reads/writes. If the amount of data being transferred in several of the SMB -commands (currently SMBwrite, SMBwriteX and SMBreadbraw) is larger than this -value then the server begins writing the data before it has received the -whole packet from the network, or in the case of SMBreadbraw, it begins -writing to the network before all the data has been read from disk. <P> -This overlapping works best when the speeds of disk and network access are -similar, having very little effect when the speed of one is much greater -than the other. <P> -The default value is 2048, but very little experimentation has been done -yet to determine the optimal value, and it is likely that the best value -will vary greatly between systems anyway. A value over 65536 is pointless -and will cause you to allocate memory unnecessarily. <P> -<B>Default:</B> read size = 2048 <P> -<B>Example:</B> read size = 8192 <P> - -<H3><A NAME="remote announce">remote announce (G)</A></H3> -This option allows you to setup nmbd to periodically announce itself to -arbitrary IP addresses with an arbitrary workgroup name. <P> -This is useful if you want your Samba server to appear in a remote workgroup -for which the normal browse propagation rules don't work. The remote -workgroup can be anywhere that you can send IP packets to. <P> -For example: <P> -remote announce = 192.168.2.255/SERVERS 192.168.4.255/STAFF <P> -the above line would cause nmbd to announce itself to the two given IP -addresses using the given workgroup names. If you leave out the workgroup -name then the one given in the <A HREF="#workgroup">workgroup</A> option is -used instead. <P> -The IP addresses you choose would normally be the broadcast -addresses of the remote networks, but can also be the IP addresses of -known browse masters if your network config is that stable. <P> -This option replaces similar functionality from the nmbd lmhosts file. <P> - -<H3><A NAME="remote browse sync">remote browse sync (G)</A></H3> -This option allows you to setup nmbd to periodically request -synchronisation of browse lists with the master browser of a samba server -that is on a remote segment. This option will allow you to gain browse -lists for multiple workgroups across routed networks. This is done in a -manner that does not work with any non-samba servers. <P> -This is useful if you want your Samba server and all local clients to appear -in a remote workgroup for which the normal browse propagation rules don't -work. The remote workgroup can be anywhere that you can send IP packets to.<P> -For example: <P> -remote browse sync = 192.168.2.255 192.168.4.255 <P> -the above line would cause nmbd to request the master browser on the -specified subnets or addresses to synchronise their browse lists with the -local server. <P> -The IP addresses you choose would normally be the broadcast addresses -of the remote networks, but can also be the IP addresses of known browse -masters if your network config is that stable. If a machine IP address -is given Samba makes NO attempt to validate that the remote machine is -available, is listening, nor that it is in fact the browse master on it's -segment. <P> - -<H3><A NAME="revalidate">revalidate (S)</A></H3> -This options controls whether Samba will allow a previously validated -username/password pair to be used to attach to a share. Thus if you connect -to \\server\share1 then to \\server\share2 it won't automatically allow the -client to request connection to the second share as the same username as the -first without a password. <P> -If "revalidate" is Yes then the client will be denied automatic access as -the same username. <P> -<B>Default:</B> revalidate = No <P> -<B>Example:</B> revalidate = Yes <P> - -<H3><A NAME="root directory">root directory (G)</A></H3> -Synonyms for this parameter are 'root dir' and 'root'. <P> -The server will chroot() to this directory on startup. This is not strictly -necessary for secure operation. Even without it the server will deny access -to files not in one of the service entries. It may also check for, and deny -access to, soft links to other parts of the filesystem, or attempts to use -.. in file names to access other directories (depending on the setting of -the <A HREF="#wide links">wide links</A> parameter). <P> -Adding a "root dir" entry other than "/" adds an extra level -of security, but at a price. It absolutely ensures that no access is given -to files not in the sub-tree specified in the "root dir" option, *including* -some files needed for complete operation of the server. To maintain full -operability of the server you will need to mirror some system files into -the "root dir" tree. In particular you will need to mirror /etc/passwd -(or a subset of it), and any binaries or configuration files needed for -printing (if required). The set of files that must be mirrored is operating -system dependent. <P> -<B>Default:</B> root directory = / <P> -<B>Example:</B> root directory = /homes/smb <P> - -<H3><A NAME="root postexec">root postexec (S)</A></H3> -This is the same as <A HREF="#postexec">postexec</A> except that -the command is run as root. This is useful for unmounting filesystems (such -as CDROMS) after a connection is closed. <P> - -<H3><A NAME="root preexec">root preexec (S)</A></H3> -This is the same as <A HREF="#exec">exec</A> except that the command is run -as root. This is useful for mounting filesystems (such as CDROMS) before a -connection is finalised. <P> - -<H3><A NAME="security">security (G)</A></H3> -This option affects how clients respond to Samba. <P> -The option sets the "security mode bit" in replies to protocol negotiations -to turn share level security on or off. Clients decide based on this bit -whether (and how) to transfer user and password information to the server.<P> -The default is "security=SHARE", mainly because that was the only option at -one stage. <P> -The alternatives are "security = user" or "security = server". <P> -If your PCs use usernames that are the same as their usernames on the -UNIX machine then you will want to use "security = user". If you mostly -use usernames that don't exist on the UNIX box then use "security = share".<P> -There is a bug in WfWg that may affect your decision. When in user level -security a WfWg client will totally ignore the password you type in the -"connect drive" dialog box. This makes it very difficult (if not impossible) -to connect to a Samba service as anyone except the user that you are logged -into WfWg as. <P> -If you use "security = server" then Samba will try to validate -the username/password by passing it to another SMB server, such as an -NT box. If this fails it will revert to "security = USER". <P> -See the <A HREF="#password server">password server</A> option for more -details. <P> -<B>Default:</B> security = SHARE <P> -<B>Example:</B> security = USER <P> - -<H3><A NAME="server string">server string (G)</A></H3> -This controls what string will show up in the printer comment box in print -manager and next to the IPC connection in "net view". It can be any string -that you wish to show to your users. <P> -It also sets what will appear in browse lists next to the machine name. <P> -A %v will be replaced with the Samba version number. <P> -A %h will be replaced with the hostname. <P> -<B>Default:</B> server string = Samba %v <P> -<B>Example:</B> server string = University of GNUs Samba Server <P> - -<H3><A NAME="set directory">set directory (S)</A></H3> -If 'set directory = No', then users of the service may not use the setdir -command to change directory. <P> -The setdir command is only implemented in the Digital Pathworks -client. See the Pathworks documentation for details. <P> -<B>Default:</B> set directory = No <P> -<B>Example:</B> set directory = Yes <P> - -<H3><A NAME="shared mem size">shared mem size (G)</A></H3> -This parameter is only useful when Samba has been compiled with -FAST_SHARE_MODES. It specifies the size of the shared -memory (in bytes) to use between smbd processes. You should never change -this parameter unless you have studied the source and know what you are -doing. This parameter defaults to 1024 multiplied by the setting of the -maximum number of open files in the file local.h in the Samba source code. -MAX_OPEN_FILES is normally set to 100, so this parameter defaults to 102400 -bytes. <P> -<B>Default</B> shared mem size = 102400 <P> - -<H3><A NAME="smb passwd file">smb passwd file (G)</A></H3> -This option sets the path to the encrypted smbpasswd file. This is a -*VERY DANGEROUS OPTION* if the smb.conf is user writable. By default the -path to the smbpasswd file is compiled into Samba. <P> - -<H3><A NAME="smbrun">smbrun (G)</A></H3> -This sets the full path to the smbrun binary. This defaults to the value in -the Makefile. <P> -You must get this path right for many services to work correctly. <P> -<B>Default:</B> taken from Makefile <P> -<B>Example:</B> smbrun = /usr/local/samba/bin/smbrun <P> - -<H3><A NAME="share modes">share modes (S)</A></H3> -This enables or disables the honouring of the "share modes" during a file -open. These modes are used by clients to gain exclusive read or write access -to a file. <P> -These open modes are not directly supported by UNIX, so they are simulated -using lock files in the <A HREF="#lock dir">lock dir</A>. The "lock dir" -specified in smb.conf must be readable by all users. <P> -The share modes that are enabled by this option are DENY_DOS, DENY_ALL, -DENY_READ, DENY_WRITE, DENY_NONE and DENY_FCB. <P> -Enabling this option gives full share compatibility but may cost a bit of -processing time on the UNIX server. They are enabled by default. <P> -<B>Default:</B> share modes = Yes <P> -<B>Example:</B> share modes = No <P> - -<H3><A NAME="short preserve case">short preserve case (S)</A></H3> -This controls if new short filenames are created with the case that the client -passes, or if they are forced to be the "default" case. <P> -<B>Default:</B> short preserve case = No <P> -See the section on <A HREF="#NAME MANGLING">NAME MANGLING</A> for a fuller -discussion. <P> - -<H3><A NAME="socket address">socket address (G)</A></H3> -This option allows you to control what address Samba will listen for -connections on. This is used to support multiple virtual interfaces on the -one server, each with a different configuration. <P> -By default samba will accept connections on any address. <P> -<B>Example:</B> socket address = 192.168.2.20 <P> - -<H3><A NAME="socket options">socket options (G)</A></H3> -This option (which can also be invoked with the -O command line option) allows -you to set socket options to be used when talking with the client. <P> -Socket options are controls on the networking layer of the operating systems -which allow the connection to be tuned. <P> -This option will typically be used to tune your Samba server for optimal -performance for your local network. There is no way that Samba can know what -the optimal parameters are for your net, so you must experiment and choose -them yourself. I strongly suggest you read the appropriate documentation for -your operating system first (perhaps "man setsockopt" will help). <P> -You may find that on some systems Samba will say "Unknown socket option" when -you supply an option. This means you either mis-typed it or you need to add -an include file to includes.h for your OS. If the latter is the case please -send the patch to me (samba-bugs@samba.anu.edu.au). <P> -Any of the supported socket options may be combined in any way you like, as -long as your OS allows it. <P> -This is the list of socket options currently settable using this option: <P> -SO_KEEPALIVE <BR> -SO_REUSEADDR <BR> -SO_BROADCAST <BR> -TCP_NODELAY <BR> -IPTOS_LOWDELAY <BR> -IPTOS_THROUGHPUT <BR> -SO_SNDBUF * <BR> -SO_RCVBUF * <BR> -SO_SNDLOWAT * <BR> -SO_RCVLOWAT * <P> -Those marked with a * take an integer argument. The others can optionally take -a 1 or 0 argument to enable or disable the option, by default they will -be enabled if you don't specify 1 or 0. <P> -To specify an argument use the syntax SOME_OPTION=VALUE for example -SO_SNDBUF=8192. Note that you must not have any spaces before or after the = -sign. <P> -If you are on a local network then a sensible option might be <P> -socket options = IPTOS_LOWDELAY <P> -If you have an almost unloaded local network and you don't mind a lot -of extra CPU usage in the server then you could try <P> -socket options = IPTOS_LOWDELAY TCP_NODELAY <P> -If you are on a wide area network then perhaps try setting IPTOS_THROUGHPUT. <P> -Note that several of the options may cause your Samba server to fail -completely. Use these options with caution! <P> -<B>Default:</B> no socket options <P> -<B>Example:</B> socket options = IPTOS_LOWDELAY <P> - -<H3><A NAME="status">status (G)</A></H3> -This enables or disables logging of connections to a status -file that <B>smbstatus</B> can read. <P> -With this disabled <B>smbstatus</B> won't be able to tell you what connections -are active. <P> -<B>Default:</B> status = Yes <P> -<B>Example:</B> status = No <P> - -<H3><A NAME="strict locking">strict locking (S)</A></H3> -This is a boolean that controls the handling of file locking in the server. -When this is set to yes the server will check every read and write access -for file locks, and deny access if locks exist. This can be slow on some -systems. <P> -When strict locking is "no" the server does file lock checks only when the -client explicitly asks for them. <P> -Well behaved clients always ask for lock checks when it is important, -so in the vast majority of cases "strict locking = no" is preferable. <P> -<B>Default:</B> strict locking = No <P> -<B>Example:</B> strict locking = Yes <P> - -<H3><A NAME="strip dot">strip dot (G)</A></H3> -This is a boolean that controls whether to strip trailing dots off -UNIX filenames. This helps with some CDROMs that have filenames ending -in a single dot. <P> -<B>Default:</B> strip dot = No <P> -<B>Example:</B> strip dot = Yes <P> - -<H3><A NAME="syslog">syslog (G)</A></H3> -This parameter maps how Samba debug messages are logged onto -the system syslog logging levels. Samba debug level zero maps onto syslog -LOG_ERR, debug level one maps onto LOG_WARNING, debug level two maps to -LOG_NOTICE, debug level three maps onto LOG_INFO. The paramter sets the -threshold for doing the mapping, all Samba debug messages above this threashold -are mapped to syslog LOG_DEBUG messages. <P> -<B>Default:</B> syslog = 1 <P> - -<H3><A NAME="syslog only">syslog only (G)</A></H3> -If this parameter is set then Samba debug messages are logged -into the system syslog only, and not to the debug log files. <P> -<B>Default:</B> syslog only = no <P> - -<H3><A NAME="sync always">sync always (S)</A></H3> -This is a boolean parameter that controls whether writes will always be -written to stable storage before the write call returns. If this is No then -the server will be guided by the client's request in each write call (clients -can set a bit indicating that a particular write should be synchronous). If -this is Yes then every write will be followed by a fsync() call to ensure the -data is written to disk. <P> -<B>Default:</B> sync always = No <P> -<B>Example:</B> sync always = Yes <P> - -<H3><A NAME="time offset">time offset (G)</A></H3> -This parameter is a setting in minutes to add to the normal GMT to local time -conversion. This is useful if you are serving a lot of PCs that have incorrect -daylight saving time handling. <P> -<B>Default:</B> time offset = 0 <P> -<B>Example:</B> time offset = 60 <P> - -<H3><A NAME="time server">time server (G)</A></H3> -This parameter determines if nmbd advertises itself as a time server to -Windows clients. <P> -<B>Default:</B> time server = No <P> -<B>Example:</B> time server = Yes <P> - -<H3><A NAME="unix password sync">unix password sync (G)</A></H3> -This boolean parameter controlls whether Samba attempts to synchronise the -UNIX password with the SMB password when the encrypted SMB password in -the smbpasswd file is changed. If this is set to Yes the -<A HREF="#passwd program">passwd program</A> -program is called *AS ROOT* - to allow the new UNIX password to be set -without access to the old UNIX password (as the SMB password has change -code has no access to the old password cleartext, only the new). By default -this is set to No. <P> -See also <A HREF="#passwd program">passwd program</A>, -<A HREF="#passwd chat">passwd chat</A> <P> -<B>Default:</B> unix password sync = No <P> -<B>Example:</B> unix password sync = Yes <P> - -<H3><A NAME="unix realname">unix realname (G)</A></H3> -This boolean parameter when set causes samba to supply the real name field -from the unix password file to the client. This is useful for setting up mail -clients and WWW browsers on systems used by more than one person. <P> -<B>Default:</B> unix realname = No <P> -<B>Example:</B> unix realname = Yes <P> - -<H3><A NAME="update encrypted">update encrypted (S)</A></H3> -This boolean parameter allows a user logging on with a plaintext password to -have their encrypted (hashed) password in the smbpasswd file to be updated -automatically as they log on. This option allows a site to migrate from -plaintext password authentication (users authenticate with plaintext -password over the wire, and are checked against a UNIX account database) to -encrypted password authentication (the SMB challenge/response authentication -mechanism) without forcing all users to re-enter their passwords via smbpasswd -at the time the change is made. This is a convenience option to allow the -change over to encrypted passwords to be made over a longer period. Once all -users have encrypted representations of their passwords in the smbpasswd file \ -this parameter should be set to "No". <P> -In order for this parameter to work correctly the -i<A HREF="#encrypt passwords">encrypt passwords</A> must be set to "No" when -this parameter is set to "Yes". <P> -Note that even when this parameter is set a user authenticating to smbd must -still enter a valid password in order to connect correctly, and to update their -hashed (smbpasswd) passwords. <P> -<B>Default:</B> update encrypted = No <P> - -<H3><A NAME="use rhosts">use rhosts (S)</A></H3> -<B>Default:</B> use rhosts = No <P> - -<H3><A NAME="username">username (S)</A></H3> -A synonym for this parameter is 'user'. <P> -Multiple users may be specified in a comma-delimited list, in which case the -supplied password will be tested against each username in turn (left to -right). <P> -The username= line is needed only when the PC is unable to supply its own -username. This is the case for the coreplus protocol or where your users have -different WfWg usernames to UNIX usernames. In both these cases you may also -be better using the \\server\share%user syntax instead. <P> -The username= line is not a great solution in many cases as it means Samba -will try to validate the supplied password against each of the usernames in -the username= line in turn. This is slow and a bad idea for lots of users in -case of duplicate passwords. You may get timeouts or security breaches using -this parameter unwisely. <P> -Samba relies on the underlying UNIX security. This parameter does not restrict -who can login, it just offers hints to the Samba server as to what usernames -might correspond to the supplied password. Users can login as whoever they -please and they will be able to do no more damage than if they started a -telnet session. The daemon runs as the user that they log in as, so they -cannot do anything that user cannot do. <P> -To restrict a service to a particular set of users you can use the -<A HREF="#valid users">valid users</A> line. <P> -If any of the usernames begin with a @ then the name will be looked -up in the groups file and will expand to a list of all users in the group -of that name. Note that searching though a groups file can take quite some -time, and some clients may time out during the search. <P> -See the section below on -<A HREF="#USERNAME/PASSWORD VALIDATION">USERNAME/PASSWORD VALIDATION</A> -for more information on how this parameter determines access to the services.<P> -<B>Default:</B> The guest account if a guest service, else the name of the service. <P> -<B>Examples:</B>username = fredusername = fred, mary, jack, jane, @users, @pcgroup <P> - -<H3><A NAME="username level">username level (G)</A></H3> -This option helps Samba to try and 'guess' at the real UNIX username, -as many DOS clients send an all-uppercase username. By default Samba tries -all lowercase, followed by the username with the first letter capitalized, -and fails if the username is not found on the UNIX machine. <P> -If this parameter is set to non-zero the behaviour changes. This parameter -is a number that specifies the number of uppercase combinations to try whilst -trying to determine the UNIX user name. The higher the number the more -combinations will be tried, but the slower the discovery of usernames will be. -Use this parameter when you have strange usernames on your UNIX machine, -such as 'AstrangeUser'. <P> -<B>Default:</B> username level = 0 <P> -<B>Example:</B> username level = 5 <P> - -<H3><A NAME="username map">username map (G)</A></H3> -This option allows you to to specify a file containing -a mapping of usernames from the clients to the server. This can be used -for several purposes. The most common is to map usernames that users use -on DOS or Windows machines to those that the UNIX box uses. The other is -to map multiple users to a single username so that they can more easily -share files. <P> -The map file is parsed line by line. Each line should contain -a single UNIX username on the left then a '=' followed by a list of usernames -on the right. The list of usernames on the right may contain names of the -form @group in which case they will match any UNIX username in that group. -The special client name '*' is a wildcard and matches any name. <P> -The file is processed on each line by taking the supplied username and -comparing it with each username on the right hand side of the '=' signs. If -the supplied name matches any of the names on the right hand side then it is -replaced with the name on the left. Processing then continues with the next -line. <P> -If any line begins with a '#' or a ';' then it is ignored <P> -If any line begins with an ! then the processing will stop after that line if -a mapping was done by the line. Otherwise mapping continues with every line -being processed. Using ! is most useful when you have a wildcard mapping line -later in the file. <P> -For example to map from the name "admin" or "administrator" to the UNIX name -"root" you would use <P> -root = admin administrator <P> -Or to map anyone in the UNIX group "system" to the UNIX name "sys" you would -use <P> -sys = @system <P> -You can have as many mappings as you like in a username map file. <P> -You can map Windows usernames that have spaces in them by using -double quotes around the name. For example: <P> -tridge = "Andrew Tridgell" <P> -would map the windows username "Andrew Tridgell" to the unix username -tridge. <P> -The following example would map mary and fred to the unix user -sys, and map the rest to guest. Note the use of the ! to tell Samba to -stop processing if it gets a match on that line. <P> -!sys = mary fred guest = * <P> -Note that the remapping is applied to all occurrences of usernames. -Thus if you connect to "\\server\fred" and "fred" is remapped to "mary" then -you will actually be connecting to "\\server\mary" and will need to supply -a password suitable for "mary" not "fred". The only exception to this is -the username passed to the <A HREF="#password server">password server</A> -(if you have one). The password server will receive whatever username the -client supplies without modification. <P> -Also note that no reverse mapping is done. The main effect this has is -with printing. Users who have been mapped may have trouble deleting print -jobs as PrintManager under WfWg will think they don't own the print job. <P> -<B>Default</B> no username map <P> -<B>Example</B> username map = /usr/local/samba/lib/users.map <P> - -<H3><A NAME="valid chars">valid chars (S)</A></H3> -The option allows you to specify additional characters that should be -considered valid by the server in filenames. This is particularly -useful for national character sets, such as adding u-umlaut or a-ring. <P> -The option takes a list of characters in either integer or character form -with spaces between them. If you give two characters with a colon between -them then it will be taken as an lowercase:uppercase pair. <P> -If you have an editor capable of entering the characters into the config file -then it is probably easiest to use this method. Otherwise you can specify the -characters in octal, decimal or hexadecimal form using the usual C notation.<P> -For example to add the single character 'Z' to the charset (which is a -pointless thing to do as it's already there) you could do one of the following -<P> -valid chars = Z <BR> -valid chars = z:Z <BR> -valid chars = 0132:0172 <P> -The last two examples above actually add two characters, and alter the -uppercase and lowercase mappings appropriately. <P> -Note that you MUST specify this parameter after the -<A HREF="#client code page">client code page</A> parameter if you have both -set. If "client code page" is set after the "valid chars" parameter the -"valid chars" settings will be overwritten. <P> -See also the <A HREF="#client code page">client code page</A> parameter. <P> -<B>Default:</B> Samba defaults to using a reasonable set of valid characters -for english systems <P> -<B>Example:</B> valid chars = 0345:0305 0366:0326 0344:0304 <P> -The above example allows filenames to have the swedish characters in them. <P> -NOTE: It is actually quite difficult to correctly produce a "valid chars" line -for a particular system. To automate the process tino@augsburg.net -has written a package called "validchars" which will automatically produce -a complete "valid chars" line for a given client system. Look in the examples -subdirectory for this package. <P> - -<H3><A NAME="valid users">valid users (S)</A></H3> -This is a list of users that should be allowed to login to this service. A -name starting with @ is interpreted as a UNIX group. <P> -If this is empty (the default) then any user can login. If a username is in -both this list and the <A HREF="#invalid users">invalid users</A> list then -access is denied for that user. <P> -The current servicename is substituted for %S. This is useful in the [homes] -section. <P> -See also <A HREF="#invalid users">invalid users</A> <P> -<B>Default</B> No valid users list. (anyone can login) <P> -<B>Example</B> valid users = greg, @pcusers <P> - -<H3><A NAME="veto files">veto files (S)</A></H3> -This is a list of files and directories that are neither visible nor -accessible. Each entry in the list must be separated by a "/", which allows -spaces to be included in the entry. '*' and '?' can be used to specify -multiple files or directories as in DOS wildcards. <P> -Each entry must be a unix path, not a DOS path and must not include the -unix directory separator "/". <P> -Note that the case sensitivity option is applicable in vetoing files. <P> -One feature of the veto files parameter that it is important to be aware of, -is that if a directory contains nothing but files that match the veto files -parameter (which means that Windows/DOS clients cannot ever see them) is -deleted, the veto files within that directory *are automatically deleted* -along with it, if the user has UNIX permissions to do so.Setting this -parameter will affect the performance of Samba, as it will be forced to check -all files and directories for a match as they are scanned. <P> -See also <A HREF="#hide files">hide files</A> and -<A HREF="#case sensitive">case sensitive</A> <P> -<B>Default</B> No files or directories are vetoed. <P> -<B>Examples</B> Example 1. Veto any files containing the word Security, any -ending in .tmp, and any directory containing the word root. <P> -veto files = /*Security*/*.tmp/*root*/ <P> -Example 2. Veto the Apple specific files that a NetAtalk server creates. <P> -veto files = /.AppleDouble/.bin/.AppleDesktop/Network Trash Folder/ <P> - -<H3><A NAME="veto oplock files">veto oplock files (S)</A></H3> -This parameter is only valid when the <A HREF="#oplocks">oplocks</A> -parameter is turned on for a share. It allows the Samba administrator to -selectively turn off the granting of oplocks on selected files that match -a wildcarded list, similar to the wildcarded list used in the -<A HREF="#veto files">veto files</A> parameter. <P> -<B>Default</B> No files are vetoed for oplock grants. <P> -<B>Examples</B> You might want to do this on files that you know will be -heavily contended for by clients. A good example of this is in the NetBench -SMB benchmark program, which causes heavy client contention for files ending -in .SEM. To cause Samba not to grant oplocks on these files you would use the -line (either in the [global] section or in the section for the particular -NetBench share : <P> -veto oplock files = /*.SEM/ <P> - -<H3><A NAME="volume">volume (S)</A></H3> -This allows you to override the volume label returned for a share. Useful for -CDROMs with installation programs that insist on a particular volume label.<P> -The default is the name of the share <P> - -<H3><A NAME="wide links">wide links (S)</A></H3> -This parameter controls whether or not links in the UNIX file system may be -followed by the server. Links that point to areas within the directory tree -exported by the server are always allowed; this parameter controls access only -to areas that are outside the directory tree being exported. <P> -<B>Default:</B> wide links = Yes <P> -<B>Example:</B> wide links = No <P> - -<H3><A NAME="wins proxy">wins proxy (G)</A></H3> -This is a boolean that controls if nmbd will respond to broadcast name queries -on behalf of other hosts. You may need to set this to no for some older -clients. <P> -<B>Default:</B> wins proxy = No <P> - -<H3><A NAME="wins server">wins server (G)</A></H3> -This specifies the DNS name (or IP address) of the WINS server that Samba -should register with. If you have a WINS server on your network then you -should set this to the WINS servers name. <P> -You should point this at your WINS server if you have a multi-subnetted -network. <P> -<B>Default:</B> wins server = <P> - -<H3><A NAME="wins support">wins support (G)</A></H3> -This boolean controls if the nmbd process in Samba will act as a WINS server. -You should not set this to Yes unless you have a multi-subnetted network and -you wish a particular nmbd to be your WINS server. Note that you should -*NEVER* set this to Yes on more than one machine in your network. <P> -<B>Default:</B> wins support = No <P> - -<H3><A NAME="workgroup">workgroup (G)</A></H3> -This controls what workgroup your server will appear to be in when queried by -clients. <P> -<B>Default:</B> set in the Makefile <P> -<B>Example:</B> workgroup = MYGROUP <P> - -<H3><A NAME="write list">write list (S)</A></H3> -This is a list of users that are given read-write access to a service. If -the connecting user is in this list then they will be given write access, -no matter what the <A HREF="#writable">writable</A> option is set to. -The list can include group names using the @group syntax. <P> -Note that if a user is in both the read list and the write list then they -will be given write access. <P> -See also the <A HREF="#read list">read list</A> option <P> -<B>Default:</B> write list = <P> -<B>Example:</B> write list = admin, root, @staff <P> - -<H3><A NAME="write raw">write raw (G)</A></H3> -This parameter controls whether or not the server will support raw writes -when transferring data from clients. <P> -<B>Default:</B> write raw = Yes <P> -<B>Example:</B> write raw = No <P> - -<H3><A NAME="USERNAME/PASSWORD VALIDATION">USERNAME/PASSWORD VALIDATION</A></H3> -There are a number of ways in which a user can connect to a -service. The server follows the following steps in determining if it will -allow a connection to a specified service. If all the steps fail then the -connection request is rejected. If one of the steps pass then the following -steps are not checked. <P> -If the service is marked "<A HREF="#guest only">guest only</A> = yes" then -steps 1 to 5 are skipped <P> -Step 1: If the client has passed a username/password -pair and that username/password pair is validated by the UNIX system's -password programs then the connection is made as that username. Note that -this includes the \\server\service%username method of passing a username. <P> -Step 2: If the client has previously registered a username with the system -and now supplies a correct password for that username then the connection -is allowed. <P> -Step 3: The client's netbios name and any previously used user -names are checked against the supplied password, if they match then the -connection is allowed as the corresponding user. <P> -Step 4: If the client has previously validated a username/password pair with -the server and the client has passed the validation token then that username -is used. This step is skipped if "<A HREF="#revalidate">revalidate</A> = yes" -for this service. <P> -Step 5: If a "<A HREF="#username">username</A> = " field is given in the -smb.conf file for the service and the client has supplied a password, and -that password matches (according to the UNIX system's password checking) with -one of the usernames from the username= field then the connection is made as -the username in the "username=" line. If one of the username in the username= -list begins with a @ then that name expands to a list of names in the group -of the same name. <P> -Step 6: If the service is a guest service then a connection is made as the -username given in the "<A HREF="#guest account">guest account</A> =" for the -service, irrespective of the supplied password.<P> - -<H3><A NAME="NAME MANGLING">NAME MANGLING </A></H3> -Samba supports "name mangling" so that DOS and Windows clients can use files -that don't conform to the 8.3 format. It can also be set to adjust the case of -8.3 format filenames. <P> -There are several options that control the way mangling is -performed, and they are grouped here rather than listed separately. <P> -All of these options can be set separately for each service (or globally, -of course). <P> -The options are: <P> -"<A HREF="#mangle case">mangle case</A> = yes/no" controls if names that have -characters that aren't of the "default" case are mangled. For example, if -this is yes then a name like "Mail" would be mangled. Default no. <P> -"<A HREF="#case sensitive">case sensitive</A> = yes/no" controls whether -filenames are case sensitive. If they aren't then Samba must do a filename -search and match on passed names. Default no. <P> -"<A HREF="#default case">default case</A> = upper/lower" controls what the -default case is for new filenames. Default lower. <P> -"<A HREF="#preserve case">preserve case</A> = yes/no" controls if new -files are created with the case that the client passes, or if they are -forced to be the "default" case. Default no. <P> -"<A HREF="#short preserve case">short preserve case</A> = yes/no" -controls if new files which conform to 8.3 syntax, that is all in upper -case and of suitable length, are created upper case, or if they are forced -to be the "default" case. This option can be use with "preserve case = -yes" to permit long filenames to retain their case, while short names -are lowered. Default no. <P> - -</BODY> -</HTML> - - diff --git a/swat/help/smb.conf.5.html b/swat/help/smb.conf.5.html index 7f35b75969c..f9d1bc5c84f 100644 --- a/swat/help/smb.conf.5.html +++ b/swat/help/smb.conf.5.html @@ -2801,7 +2801,7 @@ that responds. This is useful in case your primary server goes down. restrictions that <a href="smb.conf.5.html#securityequaldomain"><strong>"security=domain"</strong></a> doesn't suffer from: <p><br><ul> -<p><br><li > You may list several password servers in the <strong>"password server" +<p><br><li > You may list several password servers in the <strong>"password server"</strong> parameter, however if an <a href="smbd.8.html"><strong>smbd</strong></a> makes a connection to a password server, and then the password server fails, no more users will be able to be authenticated from this @@ -2877,7 +2877,7 @@ time they log in. Maybe a message of the day? Here is an example: </pre> -<p><br>Of course, this could get annoying after a while :-</strong> +<p><br>Of course, this could get annoying after a while :-) <p><br>See also <a href="smb.conf.5.html#postexec"><strong>postexec</strong></a>. <p><br><strong>Default:</strong> <code> none (no command executed)</code> @@ -4445,7 +4445,12 @@ by the Samba Team as an Open Source project similar to the way the Linux kernel is developed. <p><br>The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another excellent piece of Open -Source software) and updated for the Samba2.0 release by Jeremy -Allison, <a href="mailto:samba-bugs@samba.anu.edu.au"><em>samba-bugs@samba.anu.edu.au</em></a>. +Source software, available at +<a href="ftp://ftp.icce.rug.nl/pub/unix/"><strong>ftp://ftp.icce.rug.nl/pub/unix/</strong></a>) +and updated for the Samba2.0 release by Jeremy Allison. +<a href="mailto:samba-bugs@samba.anu.edu.au"><em>samba-bugs@samba.anu.edu.au</em></a>. +<p><br>See <a href="samba.7.html"><strong>samba (7)</strong></a> to find out how to get a full +list of contributors and details on how to submit bug reports, +comments etc. </body> </html> |