Adding Buchan Milne's updates from HEAD.

(This used to be commit e55e4c8dd66fd156a385c93f43c07bf778e2e764)

4 files changed, 1720 insertions, 0 deletions

diff --git a/packaging/Mandrake/samba2.spec.tmpl~ b/packaging/Mandrake/samba2.spec.tmpl~
new file mode 100644
index 00000000000..616756a36f4
--- /dev/null
+++ b/packaging/Mandrake/samba2.spec.tmpl~
@@ -0,0 +1,1720 @@
+%define pkg_name samba
+%define ver 2.2.5
+%define rel 17mdk
+%define vscanver 0.2.5c
+
+# Determine whether this is the system samba or not.
+%define build_system	0
+%if %build_system
+%define samba_major	%{null}
+%else
+%define samba_major	3
+%global _iconsdir	%{_datadir}/icons/
+%global _miconsdir	%{_datadir}/icons/mini
+%global _liconsdir	%{_datadir}/icons/large
+%global _menudir	%{_libdir}/menu
+#%%%%global __prefix		/opt/samba%{samba_major}
+
+%global _mandir		%{_datadir}/man
+%endif
+
+# 2.2.4 and 1 replace by samba-team at release
+%define pversion 3.0alpha20
+%define prelease 3
+# For testing this setup:
+#%define pversion1 2.2.5
+#%define prelease1 %(date +%Y%m%d)
+
+#Check to see if p(version|release) has been replaced (1 if replaced)
+%define have_pversion %(if [ "%pversion" = `echo "pversion" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi)
+%define have_prelease %(if [ "%prelease" = `echo "prelease" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi)
+
+# We might have a prerelease:
+%define have_pre %(echo %pversion|awk '{p=0} /[a-z,A-Z][a-z,A-Z]/ {p=1} {print p}')
+%if %have_pre
+%define pre_ver %(perl -e '$name="%pversion"; print ($name =~ /(.*?)[a-z]/);')
+%define pre_pre %(echo %pversion|sed -e 's/%pre_ver//g')
+%endif
+
+
+# Check to see if we are running a build from a tarball release from samba.org
+# (%have_pversion) If so, disable vscan, unless explicitly requested
+# (--with vscan).
+%define build_vscan 1
+%if %have_pversion
+%define build_vscan 0
+%{?_with_vscan: %define build_vscan 1}
+%endif
+
+# We now do detection of the Mandrake release we are building on:
+#%define build_cooker %(if [ `awk '{print $3}' /etc/mandrake-release` = "Cooker" ];then echo 1; else echo 0; fi)
+#%define build_cooker %(if [[ `cat /etc/mandrake-release|grep Cooker` ]];then echo 1; else echo 0; fi)
+%define build_mdk91 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.1 ];then echo 1; else echo 0; fi)
+%define build_mdk90 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.0 ];then echo 1; else echo 0; fi)
+%define build_mdk83 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.3 ];then echo 1; else echo 0; fi)
+%define build_mdk82 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.2 ];then echo 1; else echo 0; fi)
+%define build_mdk81 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.1 ];then echo 1; else echo 0; fi)
+%define build_mdk80 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.0 ];then echo 1; else echo 0; fi)
+%define build_mdk72 %(if [ `awk '{print $4}' /etc/mandrake-release` = 7.2 ];then echo 1; else echo 0; fi)
+%define build_non_default 0
+
+# Default options
+%define build_acl 	1
+%define build_winbind 	1
+%define build_wins 	1
+%define build_ldap 	1
+%define build_ads	1
+
+# Set defaults for each version
+%if %build_mdk91
+%endif
+
+%if %build_mdk90
+%endif
+
+%if %build_mdk83
+%endif
+
+%if %build_mdk82
+%endif
+
+%if %build_mdk81
+%define build_winbind	0
+%define build_wins	0
+%endif
+
+%if %build_mdk80
+%define build_acl	0
+%define build_winbind	0
+%define build_wins	0
+%endif
+
+%if %build_mdk72
+%define build_acl	0
+%define build_winbind	0
+%define build_wins	0
+%endif
+
+# Allow commandline option overrides (borrowed from Vince's qmail srpm):
+# To use it, do rpm [-ba|--rebuild] --with 'xxx'
+# Check if the rpm was built with the defaults, otherwise we inform the user
+%define build_non_default 0
+%{?_with_acl: %{expand: %%define build_acl 1}}
+%{?_with_acl: %{expand: %%define build_non_default 1}}
+%{?_without_acl: %{expand: %%define build_acl 0}}
+%{?_without_acl: %{expand: %%define build_non_default 1}}
+%{?_with_winbind: %{expand: %%global build_winbind 1}}
+%{?_with_winbind: %{expand: %%define build_non_default 1}}
+%{?_without_winbind: %{expand: %%define build_winbind 0}}
+%{?_without_winbind: %{expand: %%define build_non_default 1}}
+%{?_with_wins: %{expand: %%global build_wins 1}}
+%{?_with_wins: %{expand: %%define build_non_default 1}}
+%{?_without_wins: %{expand: %%global build_wins 0}}
+%{?_without_wins: %{expand: %%define build_non_default 1}}
+%{?_with_ldap: %{expand: %%global build_ldap 1}}
+%{?_with_ldap: %{expand: %%define build_non_default 1}}
+%{?_without_ldap: %{expand: %%global build_ldap 0}}
+%{?_without_ldap: %{expand: %%define build_non_default 1}}
+%{?_with_ads: %{expand: %%define build_ads 1}}
+%{?_with_ads: %{expand: %%define build_non_default 1}}
+%{?_without_ads: %{expand: %%define build_ads 0}}
+%{?_without_ads: %{expand: %%define build_non_default 1}}
+
+# As if that weren't enough, we're going to try building with antivirus
+# support as an option also
+%define build_fprot 0
+%define build_kaspersky 0
+%define build_mks 0
+%define build_openantivirus 0
+%define build_sophos 0
+%define build_symantec 0
+%define build_trend 0
+%if %build_vscan
+%{?_with_fprot: %{expand: %%global build_fprot 1}}
+%{?_with_kaspersky: %{expand: %%global build_kaspersky 1}}
+%{?_with_mks: %{expand: %%global build_mks 1}}
+%{?_with_openav: %{expand: %%global build_openantivirus 1}}
+%{?_with_sophos: %{expand: %%global build_sophos 1}}
+%{?_with_symantec: %{expand: %%global build_symantec 1}}
+%{?_with_trend: %{expand: %%global build_trend 1}}
+%define vscandir "samba-vscan-%{vscanver}"
+%endif
+%define vfsdir "examples.bin/VFS"
+
+#Workaround missing macros in 8.x:
+%{!?perl_vendorlib: %{expand: %%global perl_vendorlib %{perl_sitearch}/../}}
+
+Summary: Samba SMB server.
+Name: %{pkg_name}%{samba_major}
+%if %have_pversion && %have_pre
+Version: %{pre_ver}
+%define source_ver %{pversion}
+%endif
+%if %have_pversion && !%have_pre
+Version: %{pversion}
+%define source_ver %{pversion}
+%endif
+%if !%have_pversion
+Version: %{ver}
+%define source_ver %{ver}
+%endif
+%if %have_prelease && !%have_pre
+Release: 1.%{prelease}mdk
+%endif
+%if %have_prelease && %have_pre
+Release: 0.%{pre_pre}.%{prelease}mdk
+%endif
+%if !%have_prelease
+Release: %{rel}
+%endif
+License: GPL
+Group: System/Servers
+Source: ftp://samba.org/pub/samba/samba-%{source_ver}.tar.bz2
+URL:	http://www.samba.org
+Source1: samba.log
+Source2: mount.smb
+Source3: samba.xinetd
+Source4: swat_48.xpm.bz2
+Source5: swat_32.xpm.bz2
+Source6: swat_16.xpm.bz2
+Source7: README.%{name}-mandrake-rpm
+%if %build_vscan
+Source8: samba-vscan-%{vscanver}.tar.bz2
+%endif
+Source10: samba-print-pdf.sh.bz2
+Patch1: smbw.patch.bz2
+Patch2: samba-glibc21.patch.bz2
+#Patch3: network-recycle_bin.patch.bz2
+Patch5: samba-2.2.0-gawk.patch.bz2
+Patch12: samba-2.2.0-buildroot.patch.bz2
+#Patch16: samba-mkdir.patch.bz2
+Patch17: samba-3.0-smbmount-sbin.patch.bz2
+#Patches 20-22 to get packaging synced from 2.2.2 to 3.0
+Patch20: samba-3.0-smb.conf.patch.bz2
+Patch21: samba-3.0-winbind.init.patch.bz2
+Patch22: samba-3.0-system-auth-winbind.patch.bz2
+Patch23: samba-3alpha20-destdir.patch.bz2
+#Patch24: samba-3.0alpha13-installman.patch.bz2
+Patch25: samba-3.0alpha13-config_lang.patch.bz2
+#Patch 26 belongs with 20-22
+Patch26: samba-3.0-smb.init.patch.bz2
+Requires: pam >= 0.64, samba-common = %{version}
+BuildRequires: pam-devel autoconf readline-devel
+%if %build_acl
+BuildRequires: libacl-devel
+%endif
+%if %build_mdk72
+BuildRequires: cups-devel
+%else
+BuildRequires: libcups-devel
+%endif
+%if %build_ldap
+BuildRequires: libldap-devel
+%endif
+%if %build_ads
+BuildRequires: libldap-devel krb5-devel
+%endif
+BuildRoot: %{_tmppath}/%{name}-root
+Prefix: /usr
+Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall
+Prereq: fileutils sed /bin/grep
+
+%description
+Samba provides an SMB server which can be used to provide
+network services to SMB (sometimes called "Lan Manager")
+clients, including various versions of MS Windows, OS/2,
+and other Linux machines. Samba also provides some SMB
+clients, which complement the built-in SMB filesystem
+in Linux. Samba uses NetBIOS over TCP/IP (NetBT) protocols
+and does NOT need NetBEUI (Microsoft Raw NetBIOS frame)
+protocol.
+
+Samba-3.0 features working NT Domain Control capability and
+includes the SWAT (Samba Web Administration Tool) that
+allows samba's smb.conf file to be remotely managed using your
+favourite web browser. For the time being this is being
+enabled on TCP port 901 via xinetd. SWAT is now included in
+it's own subpackage, samba-swat.
+
+Please refer to the WHATSNEW.txt document for fixup information.
+This binary release includes encrypted password support.
+
+Please read the smb.conf file and ENCRYPTION.txt in the
+docs directory for implementation details.
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+%if %build_non_default
+WARNING: This RPM was built with command-line options. Please
+see README.%{name}-mandrake-rpm in the documentation for
+more information.
+%endif
+
+%package server
+URL:	http://www.samba.org
+Summary: Samba (SMB) server programs.
+Requires: %{name}-common = %{version}
+Group: Networking/Other
+Provides: samba
+Obsoletes: samba
+%if %build_system
+Obsoletes: samba-server-ldap
+Obsoletes: samba3-server
+%else
+Provides: samba-server
+%endif
+
+%description server
+Samba-server provides a SMB server which can be used to provide
+network services to SMB (sometimes called "Lan Manager")
+clients. Samba uses NetBIOS over TCP/IP (NetBT) protocols
+and does NOT need NetBEUI (Microsoft Raw NetBIOS frame)
+protocol.
+
+Samba-3.0 features working NT Domain Control capability and
+includes the SWAT (Samba Web Administration Tool) that
+allows samba's smb.conf file to be remotely managed using your
+favourite web browser. For the time being this is being
+enabled on TCP port 901 via xinetd. SWAT is now included in
+it's own subpackage, samba-swat.
+
+Please refer to the WHATSNEW.txt document for fixup information.
+This binary release includes encrypted password support.
+
+Please read the smb.conf file and ENCRYPTION.txt in the
+docs directory for implementation details.
+
+%if %build_ldap
+This package was compiled with LDAP support, which means that 
+passwords can be stored in LDAP or in smbpasswd files.
+To migrate your passwords from smbpasswd into LDAP, try
+examples/LDAP/import_smbpasswd.pl using:
+%{_datadir}/%{name}/scripts/import_smbpasswd.pl </etc/%{name}/smbpasswd
+
+Scripts for managing users in LDAP have been added to 
+%{_datadir}/%{name}/scripts, configuration is in /etc/%{name}/smbldap_conf.pm
+%endif
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+%package client
+URL:	http://www.samba.org
+Summary: Samba (SMB) client programs.
+Group: Networking/Other
+Requires: %{name}-common = %{version}
+Obsoletes: smbfs
+%if %build_system
+Obsoletes: samba3-client
+%else
+Provides: samba-client
+%endif
+
+%description client
+Samba-client provides some SMB clients, which complement the built-in
+SMB filesystem in Linux. These allow the accessing of SMB shares, and
+printing to SMB printers.
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+%package common
+URL:	http://www.samba.org
+Summary: Files used by both Samba servers and clients.
+Group: System/Servers
+%if %build_system
+Obsoletes: samba-common-ldap
+Obsoletes: samba3-common
+%else
+Provides: samba-common
+%endif
+
+%description common
+Samba-common provides files necessary for both the server and client
+packages of Samba.
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+%package doc
+URL:	http://www.samba.org
+Summary: Documentation for Samba servers and clients.
+Group: System/Servers
+Requires: %{name}-common = %{version}
+%if %build_system
+Obsoletes: samba3-doc
+%else
+Provides: samba-doc
+%endif
+
+%description doc
+Samba-doc provides documentation files for both the server and client
+packages of Samba.
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+%package swat
+URL:	http://www.samba.org
+Summary: The Samba Web Administration Tool.
+Requires: %{name}-server = %{version}
+Requires: xinetd
+Group: System/Servers
+%if %build_system
+Obsoletes: samba-swat-ldap
+Obsoletes: samba3-swat
+%else
+Provides: samba-swat
+%endif
+
+%description swat
+SWAT (the Samba Web Administration Tool) allows samba's smb.conf file
+to be remotely managed using your favourite web browser. For the time
+being this is being enabled on TCP port 901 via xinetd. Note that
+SWAT does not use SSL encryption, nor does it preserve comments in
+your smb.conf file. Webmin uses SSL encryption by default, and
+preserves comments in configuration files, even if it does not display
+them, and is therefore the preferred method for remotely managing
+Samba.
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+%if %build_winbind
+%package winbind
+URL:	http://www.samba.org
+Summary: Samba-winbind daemon, utilities and documentation
+Group: System/Servers
+Requires: %{name}-common = %{version}
+%description winbind
+Provides the winbind daemon and testing tools to allow authentication 
+and group/user enumeration from a Windows or Samba domain controller.
+%endif
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+%if %build_wins
+%package -n nss_wins%{samba_major}
+URL:	http://www.samba.org
+Summary: Name Service Switch service for WINS
+Group: System/Servers
+Requires: %{name}-common = %{version}
+PreReq: glibc
+%description -n nss_wins%{samba_major}
+Provides the libnss_wins shared library which resolves NetBIOS names to 
+IP addresses.
+%endif
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+#Antivirus packages:
+%if %build_fprot
+%package vscan-fprot
+Summary: On-access virus scanning for samba using FPROT
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Autoreq: 0
+%description vscan-fprot
+A vfs-module for samba to implement on-access scanning using the
+FPROT antivirus software (which must be installed to use this).
+%endif
+
+%if %build_kaspersky
+%package vscan-kaspersky
+Summary: On-access virus scanning for samba using Kaspersky
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Autoreq: 0
+%description vscan-kaspersky
+A vfs-module for samba to implement on-access scanning using the
+Kaspersky antivirus software (which must be installed to use this).
+%endif
+
+%if %build_mks
+%package vscan-mks
+Summary: On-access virus scanning for samba using MKS
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Autoreq: 0
+%description vscan-mks
+A vfs-module for samba to implement on-access scanning using the
+MKS antivirus software (which must be installed to use this).
+%endif
+
+%if %build_openantivirus
+%package vscan-openantivirus
+Summary: On-access virus scanning for samba using OpenAntivirus
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Autoreq: 0
+%description vscan-openantivirus
+A vfs-module for samba to implement on-access scanning using the
+OpenAntivirus antivirus software (which must be installed to use this).
+%endif
+
+%if %build_sophos
+%package vscan-sophos
+Summary: On-access virus scanning for samba using Sophos
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Autoreq: 0
+%description vscan-sophos
+A vfs-module for samba to implement on-access scanning using the
+Sophos antivirus software (which must be installed to use this).
+%endif
+
+%if %build_symantec
+%package vscan-symantec
+Summary: On-access virus scanning for samba using Symantec
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Autoreq: 0
+%description vscan-symantec
+A vfs-module for samba to implement on-access scanning using the
+Symantec antivirus software (which must be installed to use this).
+%endif
+
+%if %build_trend
+%package vscan-trend
+Summary: On-access virus scanning for samba using Trend
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Autoreq: 0
+%description vscan-trend
+A vfs-module for samba to implement on-access scanning using the
+Trend antivirus software (which must be installed to use this).
+%endif
+
+%prep
+# Build a summary of how this RPM was built:
+%if %build_acl
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with acl"
+%else
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without acl"
+%endif
+%if %build_winbind
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with winbind"
+%else
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without winbind"
+%endif
+%if %build_wins
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with wins"
+%else
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without wins"
+%endif
+%if %build_ldap
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with ldap"
+%else
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without ldap"
+%endif 
+%if %build_ads
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with ads"
+%else
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without ads"
+%endif
+
+%if %build_non_default
+echo "Building a non-default rpm with the following command-line arguments:"
+echo "$RPM_EXTRA_OPTIONS"
+echo "This rpm was built with non-default options, thus, to build ">%{SOURCE7}
+echo "an identical rpm, you need to supply the following options">>%{SOURCE7}
+echo "at build time: $RPM_EXTRA_OPTIONS">>%{SOURCE7}
+echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7}
+%else 
+echo "This rpm was built with default options">%{SOURCE7}
+echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7}
+%endif
+
+%if %build_vscan
+%setup -q -a 8 -n %{pkg_name}-%{source_ver}
+%else
+%setup -q -n %{pkg_name}-%{source_ver}
+%endif
+#%patch111 -p1
+%patch1 -p1 -b .smbw
+#%patch3 -p1 -b .net-r_bin
+%patch5 -p1 -b .gawk
+#%patch6 -p1
+%patch12 -p1 -b .buildroot
+%patch17 -p1 -b .sbin
+%patch20 -p1 -b .samba222
+%patch21 -p1 -b .samba222
+%patch22 -p1 -b .samba222
+%patch23 -p1 -b .destdir
+#%patch24 -p1 -b .langen
+%patch25 -p1 -b .multilang
+%patch26 -p1 -b .samba222
+cp %{SOURCE7} .
+
+# Make a copy of examples so that we have a clean one for doc:
+cp -a examples examples.bin
+
+%if %build_vscan
+# put antivirus files in examples.bin/VFS/
+for av in fprot kaspersky mks openantivirus sophos symantec trend; do
+	cp -a %{vscandir}/$av %{vfsdir}
+done
+%endif
+
+# Edit some files when not building system samba:
+%if !%build_system
+perl -pi -e 's/%{pkg_name}/%{name}/g' source/auth/pampass.c
+%endif
+
+%build
+#%serverbuild
+(cd source
+autoconf
+CPPFLAGS="-I/usr/include/openssl"; export CPPFLAGS
+CFLAGS="$RPM_OPT_FLAGS"
+%configure      --prefix=%{_prefix} \
+                --with-fhs \
+                --libdir=/etc/%{name} \
+                --sysconfdir=/etc/%{name} \
+                --localstatedir=/var \
+                --with-configdir=/etc/%{name} \
+                --with-codepagedir=/var/lib/%{name}/codepages \
+                --with-privatedir=/etc/%{name} \
+                --with-swatdir=%{_datadir}/swat%{samba_major} \
+                --with-smbmount \
+                --with-syslog \
+                --with-automount \
+                --with-pam \
+                --with-vfs \
+                --with-utmp \
+                --with-msdfs \
+                --with-smbwrapper \
+		--with-manpages-langs=en	\
+		--with-logfilebase=/var/log/%{name} \
+		--with-lockdir=/var/cache/%{name} \
+		--with-piddir=/var/run/%{name} \
+%if !%build_system
+		--program-suffix=%{samba_major} \
+%endif		
+%if %build_acl
+		--with-acl-support      \
+%endif
+%if !%build_ldap
+		--with-ldap=no		\
+%endif
+%if !%build_ads
+		--with-ads=no	\
+%endif
+                --with-quotas
+#                --with-pam_smbpass \
+#		--with-manpages-langs=en,ja,pl	\
+
+#make CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE" all
+make CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE" \
+	all smbfilter smbwrapper smbcacls pam_smbpass nsswitch nsswitch/libnss_wins.so debug2html
+# Build VFS modules (experimental)
+cd ../%vfsdir
+%configure	--prefix=%{prefix} \
+		--mandir=%{prefix}/share/man
+make
+#make CFLAGS="$RPM_OPT_FLAGS -I../../source -I../../source/include -I../../source/ubiqx \
+#	-I../../source/smbwrapper -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE"
+)
+
+# Build mkntpasswd in examples/LDAP/ for smbldaptools
+(
+cd examples.bin/LDAP/smbldap-tools/mkntpwd
+make
+)
+
+# Build antivirus vfs objects:
+%if %build_fprot
+echo "Building fprot"
+%endif
+%if %build_kaspersky
+echo "Building Kaspersky"
+(cd %{vfsdir}/kaspersky;make)
+%endif
+%if %build_mks
+echo "Building mks"
+(cd %{vfsdir}/mks;make)
+%endif
+%if %build_openantivirus
+echo "Building OpenAntivirus"
+(cd %{vfsdir}/openantivirus;make)
+%endif
+%if %build_sophos
+echo "building sophos"
+(cd %{vfsdir}/sophos;make)
+%endif
+%if %build_symantec
+echo "Building symantec"
+(cd %{vfsdir}/symantec;make)
+%endif
+%if %build_trend
+echo "Building Trend"
+(cd %{vfsdir}/trend;make)
+%endif
+
+%install
+rm -rf $RPM_BUILD_ROOT
+mkdir -p $RPM_BUILD_ROOT
+
+# Any entries here mean samba makefile is *really* broken:
+mkdir -p $RPM_BUILD_ROOT/etc/%{name}
+mkdir -p $RPM_BUILD_ROOT/%{_datadir}
+
+(cd source
+make DESTDIR=$RPM_BUILD_ROOT install)
+
+#need to stay
+mkdir -p $RPM_BUILD_ROOT/sbin
+mkdir -p $RPM_BUILD_ROOT/etc/{logrotate.d,pam.d,xinetd.d}
+mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d
+mkdir -p $RPM_BUILD_ROOT/var/cache/%{name}
+mkdir -p $RPM_BUILD_ROOT/var/log/%{name}
+mkdir -p $RPM_BUILD_ROOT/var/run/%{name}
+mkdir -p $RPM_BUILD_ROOT/var/spool/%{name}
+mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/{netlogon,profiles,printers}
+mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/printers/{W32X86,WIN40,W32ALPHA,W32MIPS,W32PPC}
+mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/codepages/src
+mkdir -p $RPM_BUILD_ROOT/lib/security
+mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib
+mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts
+
+#smbwrapper and pam_winbind not handled by make, pam_smbpass.so doesn't build
+install -m 755 source/bin/smbwrapper.so $RPM_BUILD_ROOT%{_libdir}/smbwrapper%{samba_major}.so
+#install -m 755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/lib/security/pam_smbpass.so
+install -m 755 source/nsswitch/pam_winbind.so $RPM_BUILD_ROOT/lib/security/pam_winbind%{samba_major}.so
+
+# Install VFS modules
+#install -m755 %vfsdir/audit.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs
+#for i in block recycle
+#do
+# install -m755 %vfsdir/$i/$i.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs
+#done
+
+# Antivirus support:
+#	mkdir -p $RPM_BUILD_ROOT%{_libdir}/samba/vfs/vscan
+	for av in fprotd kavp mksd oav sophos symantec trend; do
+		if [ -d %{vfsdir}/$av -a -e %{vfsdir}/$av/vscan-$av.so ];then
+			cp %{vfsdir}/$av/vscan-$av.so \
+				$RPM_BUILD_ROOT%{_libdir}/samba/vfs/
+		fi
+	done
+	
+#These scripts are not handled by make:
+#for i in addtosmbpass mksmbpasswd.sh smbtar convert_smbpasswd
+for i in addtosmbpass mksmbpasswd.sh convert_smbpasswd
+do
+  install -m755 source/script/$i $RPM_BUILD_ROOT/%{_bindir}
+done
+
+#libnss_* not handled by make:
+# Install the nsswitch library extension file
+for i in wins winbind; do
+  install -m755 source/nsswitch/libnss_${i}.so $RPM_BUILD_ROOT/lib/libnss_${i}%{samba_major}.so
+done
+# Make link for wins and winbind resolvers
+( cd $RPM_BUILD_ROOT/lib; ln -s libnss_wins%{samba_major}.so libnss_wins%{samba_major}.so.2; ln -s libnss_winbind%{samba_major}.so libnss_winbind%{samba_major}.so.2)
+
+# Install other stuff
+
+#        install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT/etc/samba/
+        install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/etc/%{name}/smb.conf
+        install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT/etc/%{name}/smbusers
+        install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT/%{_bindir}
+        #install -m755 packaging/RedHat/smbadduser $RPM_BUILD_ROOT/usr/bin
+        install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT/%{_bindir}
+        install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/etc/rc.d/init.d/smb%{samba_major}
+        install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_sbindir}/%{name}
+	install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/etc/rc.d/init.d/winbind%{samba_major}
+	install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_sbindir}/winbind%{samba_major}
+        install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/etc/pam.d/%{name}
+	install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major}
+#
+        install -m644 $RPM_SOURCE_DIR/samba.log $RPM_BUILD_ROOT/etc/logrotate.d/%{name}
+#	install -m644 packaging/Mandrake/samba-slapd-include.conf $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/samba-slapd.include
+
+# Install smbldap-tools scripts:
+#for i in examples/LDAP/smbldap-tools/*.pl; do
+#	install -m 750 $i $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+#done
+
+#install -m 750 examples/LDAP/smbldap-tools/smbldap_tools.pm $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+
+# The conf file	
+#install -m 640 examples/LDAP/smbldap-tools/smbldap_conf.pm $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}
+
+# Link both smbldap*.pm into vendor-perl (any better ideas?)
+#mkdir -p %{buildroot}/%{perl_vendorlib}
+#ln -s %{_sysconfdir}/%{name}/smbldap_conf.pm $RPM_BUILD_ROOT/%{perl_vendorlib}
+#ln -s %{_datadir}/%{name}/scripts/smbldap_tools.pm $RPM_BUILD_ROOT/%{perl_vendorlib}
+
+#mkntpwd
+#install -m750 examples.bin/LDAP/smbldap-tools/mkntpwd/mkntpwd %{buildroot}/%{_sbindir}
+
+# Samba smbpasswd migration script:
+install -m700 examples/LDAP/export_smbpasswd.pl $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+install -m700 examples/LDAP/import_smbpasswd.pl $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+
+
+
+# make a conf file for winbind from the default one:
+	cat packaging/Mandrake/smb.conf|sed -e  's/^;  winbind/  winbind/g;s/^;  obey pam/  obey pam/g; s/^;   printer admin = @"D/   printer admin = @"D/g;s/^;   password server = \*/   password server = \*/g;s/^;  template/  template/g; s/^   security = user/   security = domain/g' > packaging/Mandrake/smb-winbind.conf
+        install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/etc/%{name}/smb-winbind.conf
+
+# Link smbmount to /sbin/mount.smb and /sbin/mount.smbfs
+#I don't think it's possible for make to do this ...
+        ln -s $RPM_BUILD_ROOT/%{_bindir}/smbmount%{samba_major} $RPM_BUILD_ROOT/sbin/mount.smb%{samba_major}
+        ln -s $RPM_BUILD_ROOT/%{_bindir}/smbmount%{samba_major} $RPM_BUILD_ROOT/sbin/mount.smbfs%{samba_major}
+        echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/etc/%{name}/lmhosts
+
+# Link smbspool to CUPS (does not require installed CUPS)
+
+        mkdir -p $RPM_BUILD_ROOT/%{_libdir}/cups/backend
+        ln -s %{_bindir}/smbspool $RPM_BUILD_ROOT/%{_libdir}/cups/backend/smb%{samba_major}
+
+# xinetd support
+
+        mkdir -p $RPM_BUILD_ROOT/etc/xinetd.d
+        install -m644 %{SOURCE3} $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major}
+
+# menu support
+
+mkdir -p $RPM_BUILD_ROOT%{_menudir}
+cat > $RPM_BUILD_ROOT%{_menudir}/%{name} << EOF
+?package(%{name}):command="gnome-moz-remote http://localhost:901/" needs="gnome" \
+icon="swat%{samba_major}.xpm" section="Configuration/Networking" title="Samba Configuration" \
+longtitle="The Swat Samba Administration Tool"
+?package(%{name}):command="sh -c '\$BROWSER http://localhost:901/'" needs="x11" \
+icon="swat%{samba_major}.xpm" section="Configuration/Networking" title="Samba Configuration" \
+longtitle="The Swat Samba Administration Tool"
+EOF
+
+mkdir -p $RPM_BUILD_ROOT%{_liconsdir} $RPM_BUILD_ROOT%{_iconsdir} $RPM_BUILD_ROOT%{_miconsdir}
+
+bzcat %{SOURCE4} > $RPM_BUILD_ROOT%{_liconsdir}/swat%{samba_major}.xpm
+bzcat %{SOURCE5} > $RPM_BUILD_ROOT%{_iconsdir}/swat%{samba_major}.xpm
+bzcat %{SOURCE6} > $RPM_BUILD_ROOT%{_miconsdir}/swat%{samba_major}.xpm
+
+bzcat %{SOURCE10}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/print-pdf
+
+# Fix configs when not building system samba:
+%if !%build_system
+# Work around non-existent but claimed --program-suffix support :-(
+for dir in %{_sbindir} %{_bindir};do
+    FILES=`find %{buildroot}$dir -type f |grep -v "\."|grep -v %{samba_major}$`
+    for OLD in $FILES; do
+        NEW=`echo ${OLD}%{samba_major}`
+        mv $OLD $NEW
+    done
+done
+# And the man pages too:
+FILES=`find %{buildroot}%{_mandir} -type f `
+for OLD in $FILES; do
+    BASE=`perl -e '$name="'${OLD}'"; print "",($name =~ /(.*?)\.[0-9]/), "\n";'`
+    EXT=`echo $OLD|sed -e 's,'${BASE}',,g'`
+    NEW=`echo ${BASE}%{samba_major}${EXT}`
+    mv $OLD $NEW
+done		
+# Replace paths in config files and init scripts:
+for i in smb winbind;do
+	perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/etc/rc.d/init.d/${i}%{samba_major}
+done
+for i in /etc/%{name}/smb.conf /etc/rc.d/init.d/smb%{samba_major} %{_sbindir}/%{name} /etc/rc.d/init.d/winbind%{samba_major} %{_sbindir}/winbind%{samba_major} /etc/logrotate.d/%{name} /etc/xinetd.d/swat%{samba_major}; do
+	perl -pi -e 's,/%{pkg_name},/%{name},g; s,smbd,%{_sbindir}/smbd%{samba_major},g; s,nmbd,%{_sbindir}/nmbd%{samba_major},g; s,winbindd,%{_sbindir}/winbindd%{samba_major},g; s,/usr/sbin/swat,%{_sbindir}/swat%{samba_major},g' $RPM_BUILD_ROOT/$i;
+done
+# Fix pam files
+perl -pi -e 's/winbind/winbind%{samba_major}/g' $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major}
+# Fix xinetd file for swat:
+perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major}
+%endif
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%post server
+
+/sbin/chkconfig --level 35 smb%{samba_major} on
+
+# Add a unix group for samba machine accounts
+groupadd -frg 421 machines
+
+# Migrate tdb's from /var/lock/samba (taken from official samba spec file):
+for i in /var/lock/samba/*.tdb
+do
+if [ -f $i ]; then
+	newname=`echo $i | sed -e's|var\/lock\/samba|var\/cache\/samba|'`
+	echo "Moving $i to $newname"
+	mv $i $newname
+fi
+done
+
+# Remove the transient tdb files (modified from version in off. samba spec:
+for TDB in brlock unexpected locking messages; do
+        if [ -e /var/cache/%{name}/$TDB.tdb ]; then
+                rm -f /var/cache/%{name}/$TDB.tdb;
+        fi;
+done
+
+if [ -d /var/lock/samba ]; then
+        rm -rf /var/lock/samba
+fi
+
+%post common
+# Basic migration script for pre-2.2.1 users,
+# since smb config moved from /etc to /etc/samba
+
+# Let's create a proper /etc/samba/smbpasswd file
+[ -f /etc/%{name}/smbpasswd ] || {
+	echo "Creating password file for samba..."
+	touch /etc/%{name}/smbpasswd
+}
+
+# And this too, in case we don't have smbd to create it for us
+[ -f /var/cache/%{name}/unexpected.tdb ] || {
+	touch /var/cache/%{name}/unexpected.tdb
+}
+
+# Let's define the proper paths for config files
+perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' /etc/%{name}/smb.conf
+
+# Fix the logrotate.d file from smb and nmb to smbd and nmbd
+if [ -f /etc/logrotate.d/samba ]; then
+        perl -pi -e 's/smb /smbd /' /etc/logrotate.d/samba
+        perl -pi -e 's/nmb /nmbd /' /etc/logrotate.d/samba
+fi
+
+# And not loose our machine account SID
+[ -f /etc/MACHINE.SID ] && mv -f /etc/MACHINE.SID /etc/%{name}/ ||:
+
+%if %build_winbind
+%post winbind
+if [ $1 = 1 ]; then
+    /sbin/chkconfig winbind%{samba_major} on
+    cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave
+    cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp
+    for i in passwd group;do
+        grep ^$i /etc/nsswitch.conf |grep -v 'winbind%{samba_major}' >/dev/null
+        if [ $? = 0 ];then
+            echo "Adding a winbind%{samba_major} entry to the $i section of /etc/nsswitch.conf"
+            awk '/^'$i'/ {print $0 " winbind%{samba_major}"};!/^'$i'/ {print}' /etc/nsswitch.conf.rpmtemp >/etc/nsswitch.conf;
+	    cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp
+        else
+            echo "$i entry found in /etc/nsswitch.conf"
+        fi
+    done
+    if [ -f /etc/nsswitch.conf.rpmtemp ];then rm -f /etc/nsswitch.conf.rpmtemp;fi
+fi
+
+%preun winbind
+if [ $1 = 0 ]; then
+	echo "Removing winbind%{samba_major} entries from /etc/nsswitch.conf"
+	perl -pi -e 's/ winbind%{samba_major}//' /etc/nsswitch.conf
+
+	/sbin/chkconfig winbind%{samba_major} reset
+fi
+%endif %build_winbind
+
+%if %build_wins
+%post -n nss_wins%{samba_major}
+if [ $1 = 1 ]; then
+    cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave
+    grep '^hosts' /etc/nsswitch.conf |grep -v 'wins%{samba_major}' >/dev/null
+    if [ $? = 0 ];then
+        echo "Adding a wins entry to the hosts section of /etc/nsswitch.conf"
+        awk '/^hosts/ {print $0 " wins%{samba_major}"};!/^hosts/ {print}' /etc/nsswitch.conf.rpmsave >/etc/nsswitch.conf;
+    else
+        echo "wins entry found in /etc/nsswitch.conf"
+    fi
+#    else
+#        echo "Upgrade, leaving nsswitch.conf intact"
+fi
+
+%preun -n nss_wins%{samba_major}
+if [ $1 = 0 ]; then
+	echo "Removing wins entry from /etc/nsswitch.conf"
+	perl -pi -e 's/ wins%{samba_major}//' /etc/nsswitch.conf
+#else
+#	echo "Leaving /etc/nsswitch.conf intact"
+fi
+%endif %build_wins
+
+%preun
+
+/sbin/chkconfig --level 35 smb%{samba_major} reset
+
+if [ $1 = 0 ] ; then
+%_preun_service smb%{samba_major}
+#    /sbin/chkconfig --level 35 smb reset
+# Let's not loose /var/cache/samba
+
+#    for i in browse.dat wins.dat brlock.tdb unexpected.tdb connections.tdb \
+#locking.tdb messages.tdb;do
+#        if [ -e /var/cache/samba/$i ]; then
+#                mv -f /var/cache/samba/$i /var/cache/samba/$i.BAK
+#        fi;
+#    done
+    if [ -d /var/log/%{name} ]; then
+      rm -rf /var/log/%{name}/*
+    fi
+    if [ -d /var/cache/%{name} ]; then
+      mv -f /var/cache/%{name} /var/cache/%{name}.BAK
+    fi
+fi
+
+%post swat
+if [ -f /var/lock/subsys/xinetd ]; then
+        service xinetd reload >/dev/null 2>&1 || :
+fi
+%update_menus
+
+%postun swat
+
+# Remove swat entry from xinetd
+if [ $1 = 0 -a -f /etc/xinetd.conf ] ; then
+rm -f /etc/xinetd.d/swat%{samba_major}
+	service xinetd reload &>/dev/null || :
+fi
+
+if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
+
+%clean_menus
+
+%triggerpostun -- samba < 1.9.18p7
+
+if [ $1 != 0 ]; then
+    /sbin/chkconfig --level 35 smb on
+fi
+
+%triggerpostun -- samba < 2.0.5a-3, samba >= 2.0.0
+
+if [ $1 != 0 ]; then
+        [ ! -d /var/lock/samba ] && mkdir -m 0755 /var/lock/samba ||:
+        [ ! -d /var/spool/samba ] && mkdir -m 1777 /var/spool/samba ||:
+        [ -f /etc/inetd.conf ] && chmod 644 /etc/services /etc/inetd.conf ||:
+fi
+
+%files server
+%defattr(-,root,root)
+#%attr(-,root,root) /sbin/*
+%{_sbindir}/%{name}
+%{_sbindir}/smbd%{samba_major}
+%{_sbindir}/nmbd%{samba_major}
+#%{_sbindir}/smbcontrol
+#%{_sbindir}/mkntpwd
+#%{prefix}/bin/addtosmbpass
+%{_bindir}/mksmbpasswd.sh
+%{_bindir}/smbstatus%{samba_major}
+%{_bindir}/convert_smbpasswd%{samba_major}
+%{_bindir}/pdbedit%{samba_major}
+%{_bindir}/smbgroupedit%{samba_major}
+#%attr(755,root,root) /lib/security/pam_smbpass*
+#/usr/share/swat
+%attr(-,root,root) %config(noreplace) /etc/%{name}/smbusers
+%attr(-,root,root) %config /etc/rc.d/init.d/smb%{samba_major}
+%attr(-,root,root) %config(noreplace) /etc/logrotate.d/%{name}
+%attr(-,root,root) %config(noreplace) /etc/pam.d/%{name}
+#%attr(-,root,root) %config(noreplace) /etc/%{name}/samba-slapd.include
+%{_mandir}/man1/smbstatus*.1*
+%{_mandir}/man5/smbpasswd*.5*
+%{_mandir}/man7/samba*.7*
+%{_mandir}/man8/smbd*.8*
+%{_mandir}/man8/nmbd*.8*
+%{_mandir}/man1/smbcontrol*.1*
+%{_mandir}/man5/lmhosts*.5*
+%{_mandir}/man5/smb.conf*.5*
+%attr(775,root,root) %dir /var/lib/%{name}/netlogon
+%attr(775,root,root) %dir /var/lib/%{name}/profiles
+%attr(775,root,root) %dir /var/lib/%{name}/printers/*
+%dir /var/cache/%{name}
+%dir /var/log/%{name}
+%attr(1777,root,root) %dir /var/spool/%{name}
+%dir %{_datadir}/%{name}/scripts
+#%attr(0755,root,root) %{_datadir}/%{name}/scripts/print-pdf
+#%attr(0750,root,root) %{_datadir}/%{name}/scripts/smbldap*.pl
+#%attr(0640,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smbldap_conf.pm
+#%attr(0644,root,root) %{_datadir}/%{name}/scripts/smbldap_tools.pm
+#%{perl_vendorlib}/*.pm
+%attr(0700,root,root) %{_datadir}/%{name}/scripts/*port_smbpasswd.pl
+
+
+%files doc
+%defattr(-,root,root)
+%doc README COPYING Manifest Read-Manifest-Now
+%doc WHATSNEW.txt Roadmap
+%doc README.%{name}-mandrake-rpm
+%doc docs
+%doc examples
+%doc swat/README
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/*
+
+%files swat
+%defattr(-,root,root)
+%config(noreplace) /etc/xinetd.d/swat%{samba_major}
+#%attr(-,root,root) /sbin/*
+%{_sbindir}/swat%{samba_major}
+%{_menudir}/%{name}
+%{_miconsdir}/*.xpm
+%{_liconsdir}/*.xpm
+%{_iconsdir}/*.xpm
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/help/*
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/images/*
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/include/*
+%{_mandir}/man8/swat*.8*
+
+%files client
+%defattr(-,root,root)
+%ifnarch alpha
+/sbin/mount.smb%{samba_major}
+/sbin/mount.smbfs%{samba_major}
+%attr(755,root,root) %{_bindir}/smbmount%{samba_major}
+%attr(4755,root,root) %{_bindir}/smbumount%{samba_major}
+#%attr(4755,root,root) %{_sbindir}/smbmnt
+%{_mandir}/man8/smbmnt*.8*
+%{_mandir}/man8/smbmount*.8*
+%{_mandir}/man8/smbumount*.8*
+%endif
+%{_bindir}/nmblookup%{samba_major}
+%{_bindir}/findsmb%{samba_major}
+%{_bindir}/smbclient%{samba_major}
+%{_bindir}/smbprint%{samba_major}
+%{_bindir}/smbtar%{samba_major}
+%{_bindir}/smbspool%{samba_major}
+# Link of smbspool to CUPS
+/%{_libdir}/cups/backend/smb%{samba_major}
+/%{_mandir}/man1/nmblookup*.1*
+/%{_mandir}/man1/findsmb*.1*
+/%{_mandir}/man1/smbclient*.1*
+/%{_mandir}/man1/smbtar*.1*
+
+%files common
+%defattr(-,root,root)
+%dir /var/cache/%{name}
+%dir /var/log/%{name}
+%dir /var/run/%{name}
+#%{_bindir}/make_smbcodepage
+#%{_bindir}/make_unicodemap
+%{_bindir}/testparm%{samba_major}
+%{_bindir}/testprns%{samba_major}
+#%{_bindir}/make_printerdef
+%{_bindir}/rpcclient%{samba_major}
+%{_bindir}/smbsh%{samba_major}
+%{_bindir}/smbpasswd%{samba_major}
+%{_bindir}/net%{samba_major}
+%{_bindir}/smbtree%{samba_major}
+%{_libdir}/smbwrapper%{samba_major}.so
+%attr(-,root,root) %config(noreplace) /etc/%{name}/smb.conf
+%attr(-,root,root) %config(noreplace) /etc/%{name}/smb-winbind.conf
+%attr(-,root,root) %config(noreplace) /etc/%{name}/lmhosts
+%attr(-,root,root) /var/lib/%{name}/codepages
+%{_mandir}/man1/make_smbcodepage*.1*
+%{_mandir}/man1/make_unicodemap*.1*
+%{_mandir}/man1/testparm*.1*
+%{_mandir}/man1/smbsh*.1*
+%{_mandir}/man1/testprns*.1*
+%{_mandir}/man5/smb.conf*.5*
+%{_mandir}/man5/lmhosts*.5*
+%{_mandir}/man8/smbpasswd*.8*
+/%{_mandir}/man1/smbcacls*.1*
+
+%if %build_winbind
+%files winbind
+%defattr(-,root,root)
+%{_sbindir}/winbindd%{samba_major}
+%{_bindir}/wbinfo%{samba_major}
+%attr(755,root,root) /lib/security/pam_winbind*
+%attr(755,root,root) /lib/libnss_winbind%{samba_major}*
+%attr(-,root,root) %config /etc/rc.d/init.d/winbind%{samba_major}
+%attr(-,root,root) %config(noreplace) /etc/pam.d/system-auth-winbind*
+%{_mandir}/man8/winbindd*.8*
+%{_mandir}/man1/wbinfo*.1*
+%endif
+
+%if %build_wins
+%files -n nss_wins%{samba_major}
+%defattr(-,root,root)
+%attr(755,root,root) /lib/libnss_wins%{samba_major}.so*
+%endif
+
+#Files for antivirus support:
+%if %build_fprot
+%files vscan-fprot
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-fprotd.so
+%doc examples.bin/VFS/fprot/INSTALL
+%endif
+
+%if %build_kaspersky
+%files vscan-kaspersky
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-kavp.so
+%doc examples.bin/VFS/kaspersky/INSTALL
+%endif
+
+%if %build_mks
+%files vscan-mks
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-mksd.so
+%doc examples.bin/VFS/mks/INSTALL
+%endif
+
+%if %build_openantivirus
+%files vscan-openantivirus
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-oav.so
+%doc examples.bin/VFS/openantivirus/INSTALL
+%endif
+
+%if %build_sophos
+%files vscan-sophos
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-sophos.so
+%doc examples.bin/VFS/sophos/INSTALL
+%endif
+
+%if %build_symantec
+%files vscan-symantec
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-symantec.so
+%doc examples.bin/VFS/symantec/INSTALL
+%endif
+
+%if %build_trend
+%files vscan-trend
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-trend.so
+%doc examples.bin/VFS/trend/INSTALL
+%endif
+
+%changelog
+* Mon Oct 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.3mdk
+- Fix mount.smbfs3 pointing to smbmount not in package
+- Remove unnecessary lines from install (now done by make)
+- Build with ldap and ads on all releases by default
+- Put av-stuff back
+
+* Mon Oct 21 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.2mdk
+- When not building as system samba, avoid conflicting with system samba
+- Macro-ize as much as possible for above (aka finish cleanups)
+- Fix paths in init scripts and logrotate and xinetd
+- Fix provides and obsoletes so as to provide samba, but not obsolete
+  current stable until we have a stable release (when it's the system samba).
+- Add warnings to descriptions when not system samba.
+- This is now parallel installable with the normal samba release, for easy
+  testing. It shouldn't touch existing installations. Of course, only
+  one samba at a time on the same interface!
+
+* Sat Sep 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.1mdk
+- Merge with 2.2.6pre2.2mdk
+- Detect alpha- and beta-, along with pre-releases
+
+* Tue Feb 05 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.1mdk
+- Sync with 2.2.3-2mdk (new --without options, detect when 
+  building for a different distribution.
+
+* Mon Feb 04 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.0mdk
+- Sync with 2.2.2-10mdk, which added build-time options --with ldap,
+  winbind, acl, wins, mdk72, mdk80, mdk81, mdk82, cooker. Added
+  warning in description if built with these options.
+
+* Wed Jan 23 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.2mdk
+- Added %%if's for build_ads, which hopefully will add Active Directory
+  Support (by request).
+
+* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.1mdk
+- More syncing with 2.2 rpm (post and postun scripts)
+- Testing without ldap
+
+* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.0mdk
+- 3.0-alpha13
+- Fixed installman.sh patch.
+
+* Wed Jan 09 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.1mdk
+- Fixed %post and %preun for nss_wins, added %post and %preun for
+  samba-winbind (chkconfig and winbind entries in nsswitch.conf)
+
+* Sun Dec 23 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.0mdk
+- 3.0-alpha12
+- Sync up with changes made in 2.2.2 to support Mandrake 8.0, 7.2
+- Added new subpackage for swat
+- More %if's for ldap.
+
+* Thu Dec 20 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha11-0.0mdk
+- 3.0-alpha11
+
+* Wed Dec 19 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha10-0.0mdk
+- 3.0-alpha10
+
+* Tue Dec 18 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha9-0.0mdk
+- 3.0-alpha9
+
+* Mon Dec 17 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.1mdk
+- Added net command to %files common, pdbedit and smbgroupedit to
+  %files, s/%{prefix}\/bin/%{_bindir}/ (the big cleanup).
+  Added patch to smb.init from 2.2.2 (got missed with 3.0-alpha1 patches)
+
+* Sun Dec 16 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.0mdk
+- Patch for installman.sh to handle lang=en correctly (p24)
+- added --with-manpages-langs=en,ja,pl (translated manpages), but there
+  aren't any manpages for these languages yet ... so we still
+  need %dir and %doc entries for them ...
+- patch (p25) to configure.in to support more than 2 languages.
+- addtosmbpass seems to have returned for now, but make_* have disappeared!
+
+* Fri Dec 14 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha6-0.0mdk
+- DESTDIR patch for Makefile.in (p23), remove a lot of %install scripts
+  this forces move of smbcontrol and smbmnt to %{prefix}/bin
+  removed --with-pam_smbpass as it doesn't compile.
+
+* Thu Dec 06 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-0.0alpha1mdk
+- Samba 3.0alpha1 released (we missed Samba 3.0alpha0!)
+- Redid smbmount-sbin patch and smb.conf patch (20), removed xfs quota patch 
+  (applied upstream), removed ook-patch (codepage directory totally different).
+- Added winbind.init (21) and system-auth-winbind.pamd (22). Patches 20-23 
+  should be applied upstream before 3.0 ships ...
+
+* Wed Dec 05 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-6mdk
+- fixed typo in system-auth-winbind.pamd (--Thanks J. Gluck).
+- fixed %post xxx problem (smb not started in chkconfig --Thanks Viet & B. Kenworthy).
+
+* Fri Nov 23 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-5mdk
+- Had to remove the network recycle bin patch: it seems to mess up 
+  file deletion from windows (files appear to be "already in use")
+
+* Tue Nov 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-4mdk
+- added network recycle bin patch:
+  <http://www.amherst.edu/~bbstone/howto/samba.html>
+- added "recycle bin = .recycled" parameter in smb.conf [homes].
+- fixed winbind/nss_wins perms (oh no I don't own that stuff ;o)
+
+* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-3mdk
+- added %build 8.0 and 7.2, for tweakers to play around.
+- changed configure options:
+  . removed --with-mmap, --with-netatalk (obsolete).
+  . added --with-msdfs, --with-vfs (seems stable, but still need testing).
+
+* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-2mdk
+- rebuilt with winbind and nss_wins enabled.
+
+* Wed Oct 31 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-1mdk
+- Rebuilt on cooker.
+
+* Wed Oct 31 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.992mdk
+- Patch for smb.conf to fix incorrect lpq command, typo in winbind,
+  and add sample linpopup command. Added print driver directories.
+- New XFS quota patch (untested!, samba runs, but do quotas work? We
+  can't check yet since the kernel doesn't seem to support XFS quotas!)
+
+* Fri Oct 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-0.99mdk
+- New samba.spec, almost ready for winbind operations. OLA for Buchan Milne
+  Who did a tremendous integration work on 2.2.2.
+  Rebuild on cooker, please test XFS (ACLs and quotas) again...
+  
+* Mon Oct 15 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.9mdk
+- Samba-2.2.2. released! Use %defines to determine which subpackages
+  are built and which Mandrake release we are buiding on/for (hint: define 
+  build_mdk81 1 for Mandrake 8.1 updates)
+
+* Sun Oct 14 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011014mdk
+- %post and %postun for nss_wins
+
+* Wed Oct 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011010mdk
+- New CVS snapshot, /etc/pam.d/system-auth-winbind added
+  with configuration to allow easy winbind setup.
+  
+* Sun Oct 7 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011007mdk
+- Added new package nss_wins and moved smbpasswd to common (required by
+  winbind).
+
+* Sat Oct 6 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011006mdk
+- Added new package winbind.
+
+* Mon Oct 1 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011001mdk
+- Removed patch to smb init.d file (applied in cvs)
+
+* Sun Sep 30 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010930mdk
+- Added winbind init script, which still needs to check for running nmbd.
+
+* Thu Sep 27 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010927mdk
+- Built from samba-2.2.2-pre cvs, added winbindd, wbinfo, nss_winbind and 
+  pam_winbind, moved pam_smbpass from samba-common to samba. We still
+  need a start-up script for winbind, or need to modify existing one.
+  
+* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-15mdk
+- Enabled acl support (XFS acls now supported by kernel-2.4.8-21mdk thx Chmou)
+  Added smbd patch to support XFS quota (Nathan Scott)
+  
+* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-14mdk
+- Oops! smbpasswd created in wrong directory...
+
+* Tue Sep 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-13mdk
+- Removed a wrong comment in smb.conf.
+  Added creation of smbpasswd during install.
+
+* Mon Aug 27 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-12mdk
+- really less verbose %%post
+
+* Sat Aug 25 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1a-11mdk
+- Fix shared libs in /usr/bin silliness.
+
+* Thu Aug 23 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-10mdk
+- less verbose %%post
+
+* Wed Aug 22 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-9mdk
+- Added smbcacls (missing in %files), modification to smb.conf: ([printers]
+  is still needed, even with point-and-print!, user add script should
+  use name and not gid, since we may not get the gid . New script for
+  putting manpages in place (still need to be added in %files!). Moved
+  smbcontrol to sbin and added it and its man page to %files.
+
+* Wed Aug 22 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-8mdk
+- cleanup /var/lib/samba/codepage/src
+
+* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-7mdk
+- moved codepage generation to %install and codepage dir to /var/lib/samba
+
+* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-6mdk
+- /lib/* was in both samba and samba-common
+  Introducing samba-doc: "alas, for the sake of thy modem, shalt thou remember
+  when Samba was under the Megabyte..."
+
+* Fri Aug 03 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-5mdk
+- Added "the gc touch" to smbinit through the use of killall -0 instead of
+  grep cupsd | grep -v grep (too many greps :o)
+
+* Wed Jul 18 2001 Stefan van der Eijk <stefan@eijk.nu> 2.2.1a-4mdk
+- BuildRequires: libcups-devel
+- Removed BuildRequires: openssl-devel
+
+* Fri Jul 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-3mdk
+- replace chkconfig --add/del with --level 35 on/reset.
+
+* Fri Jul 13 2001 Geoffrey Lee <snailtalk@mandrakesoft.cm> 2.2.1a-2mdk
+- Replace discription s/inetd/xinetd/, we all love xinetd, blah.
+
+* Thu Jul 12 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-1mdk
+- Bugfix release. Fixed add user script, added print$ share and printer admin
+  We need to test interaction of new print support with CUPS, but printer
+  driver uploads should work.
+
+* Wed Jul 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-17mdk
+- fixed smb.conf a bit, rebuilt on cooker.
+
+* Tue Jul 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-16mdk
+- Finally, samba 2.2.1 has actually been release. At least we were ready!
+  Cleaned up smb.conf, and added some useful entries for domain controlling.
+  Migrated changes made in samba's samba2.spec for 2.2.1  to this file.
+  Added groupadd command in post to create a group for samba machine accounts.
+  (We should still check the postun, samba removes pam, logs and cache)
+
+* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-15mdk
+- fixed smbwrapper compile options.
+
+* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-14mdk
+- added LFS support.
+  added smbwrapper support (smbsh)
+
+* Wed Jun 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-13mdk
+- /sbin/mount.smb and /sbin/mount.smbfs now point to the correct location
+  of smbmount (/usr/bin/smbmount)
+
+* Tue Jun 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-12mdk
+- smbmount and smbumount are now in /usr/bin and SUID.
+  added ||: to triggerpostun son you don't get error 1 anymore when rpm -e
+  Checked the .bz2 sources with file *: everything is OK now (I'm so stupid ;o)!
+
+* Tue Jun 19 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1-11mdk
+- s/Copyright/License/;
+- Stop Sylvester from pretending .gz source to be .bz2 source via filename
+  aka really bzip2 the source.
+
+* Mon Jun 18 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-10mdk
+- changed Till's startup script modifications: now samba is being reloaded
+  automatically 1 minute after it has started (same reasons as below in 9mdk)
+  added _post_ and _preun_ for service smb
+  fixed creation of /var/lib/samba/{netlogon,profiles} (%dir was missing)
+
+* Thu Jun 14 2001 Till Kamppeter <till@mandrakesoft.com> 2.2.1-9mdk
+- Modified the Samba startup script so that in case of CUPS being used as
+  printing system Samba only starts when the CUPS daemon is ready to accept
+  requests. Otherwise the CUPS queues would not appear as Samba shares.
+
+* Mon Jun 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-8mdk
+- patched smbmount.c to have it call smbmnt in sbin (thanks Seb).
+
+* Wed May 30 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-7mdk
+- put SWAT menu icons back in place.
+
+* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-6mdk
+- OOPS! fixed smbmount symlinks
+
+* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-5mdk
+- removed inetd postun script, replaced with xinetd.
+  updated binary list (smbcacls...)
+  cleaned samba.spec
+
+* Mon May 28 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-4mdk
+- Changed configure options to point to correct log and codepage directories,
+  added crude script to fix logrotate file for new log file names, updated
+  patches to work with current CVS.
+
+* Thu May 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-3mdk
+- Cleaned and updated the %files section.
+
+* Sat May 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-2mdk
+- Moved all samba files from /etc to /etc/samba (Thanks DomS!).
+  Fixed fixinit patch (/etc/samba/smb.conf)
+
+* Fri May 18 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-1mdk
+- Now use packaging/Mandrake/smb.conf, removed unused and obsolete
+  patches, moved netlogon and profile shares to /var/lib/samba in the
+  smb.conf to match the spec file. Added configuration for ntlogon to
+  smb.conf. Removed pam-foo, fixinit and makefilepath patches. Removed
+  symlink I introduced in 2.2.0-1mdk
+
+* Thu May 3 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-5mdk
+- Added more configure options. Changed Description field (thx John T).
+
+* Wed Apr 25 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-4mdk
+- moved netlogon and profiles to /var/lib/samba by popular demand ;o)
+
+* Tue Apr 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-3mdk
+- moved netlogon and profiles back to /home.
+
+* Fri Apr 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-2mdk
+- fixed post inetd/xinetd script&
+
+* Thu Apr 19 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.0-1mdk
+- Upgrade to 2.2.0. Merged most of 2.0.7-25mdk's patches (beware
+  nasty "ln -sf samba-%{ver} ../samba-2.0.7" hack to force some patches
+  to take. smbadduser and addtosmbpass seem to have disappeared. Moved
+  all Mandrake-specific files to packaging/Mandrake and made patches
+  from those shipped with samba. Moved netlogon to /home/samba and added
+  /home/samba/profiles. Added winbind,smbfilter and debug2html to make command.
+
+* Thu Apr 12 2001 Frederic Crozat <fcrozat@mandrakesoft.com> 2.0.7-25mdk
+- Fix menu entry and provide separate menu entry for GNOME
+  (nautilus doesn't support HTTP authentication yet)
+- Add icons in package
+
+* Fri Mar 30 2001 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-24mdk
+- use new server macros
+
+* Wed Mar 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-23mdk
+- check whether /etc/inetd.conf exists (upgrade) or not (fresh install).
+
+* Thu Mar 15 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-22mdk
+- spec cosmetics, added '-r' option to lpr-cups command line so files are
+  removed from /var/spool/samba after printing.
+
+* Tue Mar 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-21mdk
+- merged last rh patches.
+
+* Thu Nov 23 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-20mdk
+- removed dependencies on cups and cups-devel so one can install samba without using cups
+- added /home/netlogon
+
+* Mon Nov 20 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-19mdk
+- Changed default print command in /etc/smb.conf, so that the Windows
+  driver of the printer has to be used on the client.
+- Fixed bug in smbspool which prevented from printing from a
+  Linux-Samba-CUPS client to a Windows server through the guest account.
+
+* Mon Oct 16 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-18mdk
+- Moved "smbspool" (Samba client of CUPS) to the samba-client package
+
+* Sat Oct 7 2000 Stefan van der Eijk <s.vandereijk@chello.nl> 2.0.7-17mdk
+- Added RedHat's "quota" patch to samba-glibc21.patch.bz2, this fixes
+  quota related compile problems on the alpha.
+
+* Wed Oct 4 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-16mdk
+- Fixed 'guest ok = ok' flag in smb.conf
+
+* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-15mdk
+- Allowed guest account to print in smb.conf
+- added swat icon in menu
+
+* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-14mdk
+- Removed rh ssl patch and --with-ssl flag: not appropriate for 7.2
+
+* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-13mdk
+- Changed fixinit patch.
+- Changed smb.conf for better CUPS configuration.
+- Thanks Fred for doing this ---vvv.
+
+* Tue Oct  3 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-12mdk
+- menu entry for web configuration tool.
+- merge with rh: xinetd + ssl + pam_stack.
+- Added smbadduser rh-bugfix w/o relocation of config-files.
+
+* Mon Oct  2 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-11mdk
+- added build requires on cups-devel and pam-devel.
+
+* Mon Oct  2 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-10mdk
+- Fixed smb.conf entry for CUPS: "printcap name = lpstat", "lpstats" was
+  wrong.
+
+* Mon Sep 25 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-9mdk
+- Cosmetic changes to make rpmlint more happy
+
+* Wed Sep 11 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-8mdk
+- added linkage to the using_samba book in swat
+
+* Fri Sep 01 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-7mdk
+- Added CUPS support to smb.conf
+- Added internationalization options to smb.conf [Global]
+
+* Wed Aug 30 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-6mdk
+- Put "smbspool" to the files to install
+
+* Wed Aug 30 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-5mdk
+- Did some cleaning in the patches
+
+* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-4mdk
+- relocated man pages from /usr/man to /usr/share/man for compatibility reasons
+
+* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-3mdk
+- added make_unicodemap and build of unicode_map.$i in the spec file
+
+* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-2mdk
+- renamed /etc/codepage/codepage.$i into /etc/codepage/unicode_map.$i to fix smbmount bug.
+
+* Fri Jul 07 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-1mdk
+- 2.0.7
+
+* Wed Apr 05 2000 Francis Galiegue <fg@mandrakesoft.com> 2.0.6-4mdk
+
+- Titi sucks, does not put versions in changelog
+- Fixed groups for -common and -client
+- /usr/sbin/samba is no config file
+
+* Thu Mar 23 2000 Thierry Vignaud <tvignaud@mandrakesoft.com>
+- fix buggy post install script (pixel)
+
+* Fri Mar 17 2000 Francis Galiegue <francis@mandrakesoft.com> 2.0.6-2mdk
+
+- Changed group according to 7.1 specs
+- Some spec file changes
+- Let spec-helper do its job
+
+* Thu Nov 25 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- 2.0.6.
+
+* Tue Nov  2 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- Merge with rh changes.
+- Split in 3 packages.
+
+* Fri Aug 13 1999 Pablo Saratxaga <pablo@@mandrakesoft.com>
+- corrected a bug with %post (the $1 parameter is "1" in case of
+  a first install, not "0". That parameter is the number of packages
+  of the same name that will exist after running all the steps if nothing
+  is removed; so it is "1" after first isntall, "2" for a second install
+  or an upgrade, and "0" for a removal)
+
+* Wed Jul 28 1999 Pablo Saratxaga <pablo@@mandrakesoft.com>
+- made smbmnt and smbumount suid root, and only executable by group 'smb'
+  add to 'smb' group any user that should be allowed to mount/unmount
+  SMB shared directories
+
+* Fri Jul 23 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- 2.0.5a (bug security fix).
+
+* Wed Jul 21 1999 Axalon Bloodstone <axalon@linux-mandrake.com>
+- 2.0.5
+- cs/da/de/fi/fr/it/tr descriptions/summaries
+
+* Sun Jun 13 1999 Bernhard Rosenkränzer <bero@mandrakesoft.com>
+- 2.0.4b
+- recompile on a system that works ;)
+
+* Wed Apr 21 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- Mandrake adaptations.
+- Bzip2 man-pages.
+
+* Fri Mar 26 1999 Bill Nottingham <notting@redhat.com>
+- add a mount.smb to make smb mounting a little easier.
+- smb filesystems apparently do not work on alpha. Oops.
+
+* Thu Mar 25 1999 Bill Nottingham <notting@redhat.com>
+- always create codepages
+
+* Tue Mar 23 1999 Bill Nottingham <notting@redhat.com>
+- logrotate changes
+
+* Sun Mar 21 1999 Cristian Gafton <gafton@redhat.com>
+- auto rebuild in the new build environment (release 3)
+
+* Fri Mar 19 1999 Preston Brown <pbrown@redhat.com>
+- updated init script to use graceful restart (not stop/start)
+
+* Tue Mar  9 1999 Bill Nottingham <notting@redhat.com>
+- update to 2.0.3
+
+* Thu Feb 18 1999 Bill Nottingham <notting@redhat.com>
+- update to 2.0.2
+
+* Mon Feb 15 1999 Bill Nottingham <notting@redhat.com>
+- swat swat
+
+* Tue Feb  9 1999 Bill Nottingham <notting@redhat.com>
+- fix bash2 breakage in post script
+
+* Fri Feb  5 1999 Bill Nottingham <notting@redhat.com>
+- update to 2.0.0
+
+* Mon Oct 12 1998 Cristian Gafton <gafton@redhat.com>
+- make sure all binaries are stripped
+
+* Thu Sep 17 1998 Jeff Johnson <jbj@redhat.com>
+- update to 1.9.18p10.
+- fix %triggerpostun.
+
+* Tue Jul 07 1998 Erik Troan <ewt@redhat.com>
+- updated postun triggerscript to check $0
+- clear /etc/codepages from %preun instead of %postun
+
+* Mon Jun 08 1998 Erik Troan <ewt@redhat.com>
+- made the %postun script a tad less agressive; no reason to remove
+  the logs or lock file (after all, if the lock file is still there,
+  samba is still running)
+- the %postun and %preun should only exectute if this is the final
+  removal
+- migrated %triggerpostun from Red Hat's samba package to work around
+  packaging problems in some Red Hat samba releases
+
+* Sun Apr 26 1998 John H Terpstra <jht@samba.anu.edu.au>
+- minor tidy up in preparation for release of 1.9.18p5
+- added findsmb utility from SGI package
+
+* Wed Mar 18 1998 John H Terpstra <jht@samba.anu.edu.au>
+- Updated version and codepage info.
+- Release to test name resolve order
+
+* Sat Jan 24 1998 John H Terpstra <jht@samba.anu.edu.au>
+- Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com>
+- Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb
+- Compounded make line
+- Updated smb.init restart mechanism
+- Use compound mkdir -p line instead of individual calls to mkdir
+- Fixed smb.conf file path for log files
+- Fixed smb.conf file path for incoming smb print spool directory
+- Added a number of options to smb.conf file
+- Added smbadduser command (missed from all previous RPMs) - Doooh!
+- Added smbuser file and smb.conf file updates for username map
diff --git a/packaging/Mandrake/swat_16.xpm.bz2 b/packaging/Mandrake/swat_16.xpm.bz2
new file mode 100644
index 00000000000..c17430c5890
--- /dev/null
+++ b/packaging/Mandrake/swat_16.xpm.bz2
diff --git a/packaging/Mandrake/swat_32.xpm.bz2 b/packaging/Mandrake/swat_32.xpm.bz2
new file mode 100644
index 00000000000..c8e4df6bff7
--- /dev/null
+++ b/packaging/Mandrake/swat_32.xpm.bz2
diff --git a/packaging/Mandrake/swat_48.xpm.bz2 b/packaging/Mandrake/swat_48.xpm.bz2
new file mode 100644
index 00000000000..812b737b4f4
--- /dev/null
+++ b/packaging/Mandrake/swat_48.xpm.bz2