Adding Buchan Milne's updates.

(This used to be commit d816c35c1d8db343c76a32a6d01952d2c192b092)

18 files changed, 2316 insertions, 284 deletions

diff --git a/packaging/Mandrake/README b/packaging/Mandrake/README
index 1c5bb30edc0..5ccfb1d22b3 100644
--- a/packaging/Mandrake/README
+++ b/packaging/Mandrake/README
@@ -1,7 +1,7 @@
 Preparation Date: Sat Apr 14 2001
-Preparer:	  John H Terpstra <jht@samba.org>
+Preparer:	Gerald Carter <jerry@samba.org>
 
-Instructions:	Preparing Samba Packages for Mandrake Linux 7.2
+Instructions:	Preparing Samba Packages for Mandrake Linux 8.x
 ===============================================================
 
 We provide support only for current versions of Mandrake Linux.
diff --git a/packaging/Mandrake/README.mandrake b/packaging/Mandrake/README.mandrake
new file mode 100644
index 00000000000..83920f238f1
--- /dev/null
+++ b/packaging/Mandrake/README.mandrake
@@ -0,0 +1,117 @@
+-----BEGIN PGP SIGNED MESSAGE-----
+Hash: SHA1
+
+The Mandrake samba spec file used for packaging for Mandrake and cooker
+is now also used by the makerpms.sh script, and you can pass any options
+that you would normally pass to rpm via the makerpms.sh script.
+
+Note that only release after 8.1 support passing options using 
+"--with <option>" syntax. The following options are available when
+building with the script:
+
+- --with|--without ldap
+- --with|--without acl
+- --with|--without winbind
+- --with|--without  wins
+- --with vscan
+Using "--with vscan" requires that you place a copy of the samba-vscan
+tarball (coverted to bz2 using bzme) from:
+http://prdownloads.sourceforge.net/openantivirus/samba-vscan-0.2.5a.tar.gz?download in your rpm source directory:
+
+cp samba-vscan-0.2.5a.tar.gz `rpm --eval "%_sourcedir"`
+bzme `rpm --eval "%_sourcedir"`/samba-vscan-0.2.5a.tar.gz
+
+When using "--with vscan" you will probably want to enable a virus scanner
+also:
+- --with fprot
+- --with kaspersky
+- --with mks
+- --with openantivirus
+- --with sophos
+- --with symantec
+- --with trend
+
+You may need to do additional setup for your virus scanner to get this to
+work, please see ../../examples/VFS/<scanner>/INSTALL (after having started
+a build with "sh makerpms.sh --with vscan")
+
+Note that only sophos has been tested with the spec, but the rest should work
+(after the preparation). Reports of working scanners are welcome, and please
+report any that do not work (preferably with a fix :-)).
+
+So, to build ldap-enable RPMs for with antivirus support with sophos, but
+no acl support, use:
+sh makerpms.sh --with ldap --with vscan --with sophos --without acl
+
+The same features can be enabled on Mandrake 7.2/8.0 by editing samba2.spec, 
+and changing the 0 to 1 to enable the option:
+
+%if %build_mdk80
+%define build_acl 0
+%define build_winbind 0
+%define build_wins 0
+%define build_ldap 0
+%endif
+
+Similar sections exist for the virus scanning options.
+
+(If you haven't rebuilt RPMs before, it is suggested that you take a
+brief look through http://www.linux-mandrake.com/howtos/mdk-rpm/,
+specifically sections 3.1 and 3.2)
+
+The defaults for Mandrake 8.1 and 8.2 are shown below:
+%if %build_mdk82
+%define build_acl 1
+%define build_winbind 1
+%define build_wins 1
+%define build_ldap 0
+%endif
+
+%if %build_mdk81
+%define build_acl 1
+%define build_winbind 0
+%define build_wins 0
+%define build_ldap 0
+%endif
+
+Note that building with LDAP support will only allow you to use smbpasswd's
+stored in ldap, not in the local smbpasswd file. From 2.2.5 onwards in the 
+2.2 tree, ldap-enable RPMs now carry an ldap modifier to indicate this (for
+example, samba-server becomes samba-server-ldap).
+
+Building with acl requires that you have the acl development libraries. 
+The libraries are standard on 8.1 and 8.2.
+ACLs can be used on Mandrake 8.0 with the updated kernel (to support XFS)
+if you install the RPMs available at 
+http://ranger.dnsalias.com/mandrake/samba/RPMS/8.0/samba-2.2.1a_xfs/
+
+Note that precompiled binaries of samba are also available on my site:
+http://ranger.dnsalias.com/mandrake/samba
+and that of Sylvestre Taburet:
+http://people.mandrakesoft.com/~staburet/samba/
+
+If you have any problems with these RPMs, please send email to both
+bgmilne@cae.co.za and staburet@mandrakesoft.com
+
+These RPMs are provided as-is, are not official, and can not be 
+supported by Mandrakesoft. However, we will do our best to provide
+reliable and well-packaged RPMS, since we use them on our own servers
+and those of clients.
+
+This file is signed with my gpg key, a copy of my public key is available
+at http://ranger.dnsalias.com/bgmilne.asc. The finger-print for this key 
+follows:
+1024D/60D204A7 2919 E232 5610 A038 87B1 72D6 AC92 BA50 60D2 04A7
+
+Recent posts by me on samba@samba.org have been signed with this key,
+in case you really want to verify who I am to some extent.
+
+Buchan Milne
+18 June 2002
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.0.6 (GNU/Linux)
+
+iD8DBQE9D2h3rJK6UGDSBKcRAhtJAKC0fVkIMETgRxccrwLBcKZKHllCIACeNcZ9
+bxGZSTOHs57ir3wFR+3s0XM=
+=ifKf
+-----END PGP SIGNATURE-----
diff --git a/packaging/Mandrake/makerpms-cvs.sh b/packaging/Mandrake/makerpms-cvs.sh
new file mode 100644
index 00000000000..72c75b772b5
--- /dev/null
+++ b/packaging/Mandrake/makerpms-cvs.sh
@@ -0,0 +1,34 @@
+#!/bin/bash
+# makerpms-cvs.sh
+# A quick script to build RPMs from cvs to test packaging
+# Buchan Milne <bgmilne@cae.co.za>
+
+[ $# -lt 1 ] &&  echo "Usage: $0 <Samba version>" && exit 1
+
+VERSION=$1
+RELEASE=0.`date +%Y%m%d`
+shift
+
+# Replace PRELEASE and PVERSION with release number in all files ending with
+# .tmpl
+
+FILES=$(find . -name "*.tmpl" -type f)
+
+for i in $FILES;do 
+	NEW=$(echo $i|sed -e 's/\.tmpl//g'); 
+	cat $i |sed -e 's/PVERSION/'$VERSION'/g; s/PRELEASE/'$RELEASE'/g'> $NEW ;
+done
+
+#Change up three directories, rename directory to samba-$VERSION, change back
+#then run makerpms.sh
+
+(
+CURRENT=$(pwd)
+cd $(dirname $(dirname $(dirname $CURRENT)))
+SAMBA_DIR=$(basename $(dirname $(dirname $CURRENT)))
+mv $SAMBA_DIR samba-$VERSION
+cd samba-$VERSION/packaging/Mandrake
+sh makerpms.sh $@
+cd $(dirname $(dirname $(dirname $CURRENT)))
+mv samba-$VERSION $SAMBA_DIR
+)
diff --git a/packaging/Mandrake/makerpms.sh.tmpl b/packaging/Mandrake/makerpms.sh.tmpl
index c4ad9c6b581..ba4eff0e2b1 100644
--- a/packaging/Mandrake/makerpms.sh.tmpl
+++ b/packaging/Mandrake/makerpms.sh.tmpl
@@ -1,16 +1,77 @@
 #!/bin/sh
-# Copyright (C) 1998 John H Terpstra, 1999 K Spoon
+# Copyright (C) John H Terpstra 1998-2002
+# Updated for RPM 3 by Jochen Wiedmann, joe@ispsoft.de
+# Changed for a generic tar file rebuild by abartlet@pcug.org.au
+# Taken from Red Hat build area by JHT
+# Changed by John H Terpstra to build on RH8.1 - should also work for earlier versions jht@samba.org
+# Changes from Buchan Milne <bgmilne@cae.co.za>
+
+# The following allows environment variables to override the target directories
+#   the alternative is to have a file in your home directory calles .rpmmacros
+#   containing the following:
+#   %_topdir  /home/mylogin/RPM
 #
-SPECDIR=/usr/src/RPM/SPECS
-SRCDIR=/usr/src/RPM/SOURCES
+
+# rpm --eval should always give a correct answer for this
+SPECDIR=`rpm --eval "%{_specdir}"`
+SRCDIR=`rpm --eval "%{_sourcedir}"`
+
+# At this point the (SPECDIR and) SRCDIR vaiables must have a value!
+
 USERID=`id -u`
 GRPID=`id -g`
 VERSION='PVERSION'
 
-( cd ../../.. ; mv samba samba-$VERSION; chown -R ${USERID}.${GRPID} ${SRCDIR}/samba-$VERSION )
-( cd ../../.. ; tar --exclude=CVS -czvf ${SRCDIR}/samba-$VERSION.tar.gz samba-$VERSION )
-( cd ../../.. ; mv samba-$VERSION samba )
-cp -a *.spec $SPECDIR
-cp -a *.patch smb.* samba.log $SRCDIR
-cd $SPECDIR
-rpm -ba -v samba2.spec
+RPMVER=`rpm --version | awk '{print $3}'`
+echo The RPM Version on this machine is: $RPMVER
+
+case $RPMVER in
+    2*)
+       echo Building for RPM v2.x
+       sed -e "s/MANDIR_MACRO/\%\{prefix\}\/man/g" < samba2.spec > samba.spec
+       ;;
+    3*)
+       echo Building for RPM v3.x
+       sed -e "s/MANDIR_MACRO/\%\{prefix\}\/man/g" < samba2.spec > samba.spec
+       ;;
+    4*)
+       echo Building for RPM v4.x
+       sed -e "s/MANDIR_MACRO/\%\{_mandir\}/g" < samba2.spec > samba.spec
+       ;;
+    *)
+       echo "Unknown RPM version: `rpm --version`"
+       exit 1
+       ;;
+esac
+
+( cd ../../source; if [ -f Makefile ]; then make distclean; fi )
+( cd ../../.. ; chown -R ${USERID}.${GRPID} samba-${VERSION} )
+echo "Compressing the source as bzip2, may take a while ..."
+( cd ../../.. ; tar --exclude=CVS -cjf ${SRCDIR}/samba-${VERSION}.tar.bz2 samba-${VERSION} )
+
+cp -av samba.spec ${SPECDIR}
+# cp -a *.patch.bz2 *.xpm.bz2 smb.* samba.xinetd samba.log $SRCDIR
+# Prepare to allow straight patches synced from Mandrake cvs:
+# Updating of sources and patches can be done more easily and accurately
+# by using info in the spec file. It won't work for files that use an rpm
+# macro in their name, but that shouldn't be a problem.
+
+SOURCES=`awk '/^Source/ {print $2}' samba.spec |grep -v "%{"`
+PATCHES=`awk  '/^Patch/ {print $2}' samba.spec`
+
+for i in $PATCHES $SOURCES;do
+	# We have two cases to fix, one where it's bzip2'ed
+	# in the spec and not in CVS, one where it's bzip2'ed 
+	# in CVS but not in the spec
+	[ -e $i ] && cp -av $i $SRCDIR
+	i_nobz2=`echo $i|sed -e 's/.bz2$//'`
+	i_bz2=$i.bz2
+	[ -e $i_nobz2 ] && bzip2 -kf $i_nobz2  && mv -fv $i $SRCDIR
+	[ -e $i_bz2 ] && bunzip2 -kf $i_bz2 && mv -fv $i $SRCDIR
+done
+
+echo Getting Ready to build release package
+cd ${SPECDIR}
+rpm -ba -v --clean --rmsource samba.spec $@
+
+echo Done.
diff --git a/packaging/Mandrake/samba-2.2.0-buildroot.patch b/packaging/Mandrake/samba-2.2.0-buildroot.patch
new file mode 100644
index 00000000000..72091a13bcb
--- /dev/null
+++ b/packaging/Mandrake/samba-2.2.0-buildroot.patch
@@ -0,0 +1,15 @@
+--- samba-2.2.0/source/script/installbin.sh	Fri Jan 12 21:28:02 2001
++++ samba-2.2.0/source/script/installbin.sh.207	Thu Apr 19 09:40:57 2001
+@@ -33,9 +33,9 @@
+  chmod $INSTALLPERMS $BINDIR/$p2
+ 
+  # this is a special case, mount needs this in a specific location
+- if [ $p2 = smbmount ]; then
+-   ln -sf $BINDIR/$p2 /sbin/mount.smbfs
+- fi
++ #if [ $p2 = smbmount ]; then
++ #  ln -sf $BINDIR/$p2 /sbin/mount.smbfs
++ #fi
+ done
+ 
+ 
diff --git a/packaging/Mandrake/samba-2.2.0-gawk.patch b/packaging/Mandrake/samba-2.2.0-gawk.patch
new file mode 100644
index 00000000000..b77bc3a93cc
--- /dev/null
+++ b/packaging/Mandrake/samba-2.2.0-gawk.patch
@@ -0,0 +1,11 @@
+--- samba-2.2.0/source/script/convert_smbpasswd.gawk	Thu Nov  5 04:50:17 1998
++++ samba-2.2.0/source/script/convert_smbpasswd	Thu Apr 19 08:43:44 2001
+@@ -7,7 +7,7 @@
+ # with trying to work out how to get the seconds since 1970
+ # in awk or the shell. JRA.
+ #
+-nawk 'BEGIN {FS=":"} 
++gawk 'BEGIN {FS=":"} 
+ {
+ 	if( $0 ~ "^#" ) {
+ 		print $0
diff --git a/packaging/Mandrake/samba-2.2.5-gp-reloc-fix.patch b/packaging/Mandrake/samba-2.2.5-gp-reloc-fix.patch
new file mode 100644
index 00000000000..8888d6622e5
--- /dev/null
+++ b/packaging/Mandrake/samba-2.2.5-gp-reloc-fix.patch
@@ -0,0 +1,12 @@
+diff -ur samba-2.2.5.orig/examples/VFS/Makefile.in samba-2.2.5/examples/VFS/Makefile.in
+--- samba-2.2.5.orig/examples/VFS/Makefile.in	2002-06-17 20:35:09.000000000 +0200
++++ samba-2.2.5/examples/VFS/Makefile.in	2002-06-30 16:43:15.000000000 +0200
+@@ -4,7 +4,7 @@
+ 
+ CC=@CC@
+ LIBTOOL=@LIBTOOL@
+-CFLAGS=@CFLAGS@
++CFLAGS=@CFLAGS@ -DPIC -fPIC
+ LDFLAGS=@LDFLAGS@
+ 
+ VFS_OBJS=audit.so skel.so block/block.so recycle/recycle.so
diff --git a/packaging/Mandrake/samba-print-pdf.sh b/packaging/Mandrake/samba-print-pdf.sh
new file mode 100644
index 00000000000..5c744f0a83d
--- /dev/null
+++ b/packaging/Mandrake/samba-print-pdf.sh
@@ -0,0 +1,59 @@
+#!/bin/bash
+# samba-print-pdf
+# This is a script which allows you to set up a virtual printer on samba
+# which will take the file (generated by a postscript filter on windows)
+# and turn it into a PDF, informing the user of where it is when it
+# is done
+#
+# Buchan Milne <bgmilne@cae.co.za> 20020723
+#
+# Arguments:
+# $1 = file (usually passed with %s from samba)
+# $2 = unix prefix to where to place the file (~%u should work)
+# $3 = windows prefix to the same location (\\%L\%u should work)
+# $4 = user/computer to send a notification to (%u or %m)
+# $5 = IP address of client (%I)
+
+
+PS2PDF=ps2pdf13 
+OPTIONS="-dAutoFilterColorImages=false -sColorImageFilter=FlateEncode"
+INPUT=$1
+KEEP_PS=1
+PERMS=640
+INFILE=$(basename $INPUT)
+BASEFILE=pdf-service
+
+#make a temp file to use for the output of the PDF
+OUTPUT=`mktemp -q $2/$BASEFILE-XXXXXX`
+if [ $? -ne 0 ]; then
+	echo "$0: Can't create temp file $2/$BASEFILE-XXXXXX, exiting..."
+	exit 1
+fi
+									
+WIN_OUTPUT="$3\\`basename $OUTPUT`"
+
+# create the PDF:
+$PS2PDF $OPTOINS $INPUT $OUTPUT.pdf >/dev/null 2>&1
+
+# Generate a message to send to the user, and deal with the original file:
+MESSAGE=$(echo "Your PDF file has been created as $WIN_OUTPUT.pdf\n")
+
+if [ $KEEP_PS ];then
+	mv $INPUT $OUTPUT.ps
+	MESSAGE=$(echo "$MESSAGE and your postscript file as $WIN_OUTPUT.ps")
+	# Fix permissions on the generated files
+	chmod $PERMS $OUTPUT.ps
+else
+	rm -f $INPUT
+	chmod $PERMS $OUTPUT.ps $OUTPUT.pdf
+	# Fix permissions on the generated files
+fi
+					                        
+chmod $PERMS $OUTPUT.ps $OUTPUT.pdf
+
+#Remove empty file from mktemp:
+rm -f $OUTPUT
+
+# Send notification to user
+echo -e $MESSAGE|smbclient -M $4 -I $5 -U "PDF Generator" >/dev/null 2>&1
+
diff --git a/packaging/Mandrake/samba-slapd-include.conf b/packaging/Mandrake/samba-slapd-include.conf
new file mode 100644
index 00000000000..9c065b6f737
--- /dev/null
+++ b/packaging/Mandrake/samba-slapd-include.conf
@@ -0,0 +1,15 @@
+# You should either include this file into your
+# /etc/openldap/slapd.conf, or add the contents (after editing), inside
+# the db definition your samba server will use.
+
+
+# Index the rid for samba:
+index	rid		eq
+
+
+# Basic samba acl:
+access to attrs=lmPassword,ntPassword
+	by dn="cn=root,dc=mydomain,dc=com" write
+	by dn="uid=root,ou=People,dc=mydomain,dc=com" write
+	by * none
+
diff --git a/packaging/Mandrake/samba.log b/packaging/Mandrake/samba.log
index 7dc1667bafe..4e8b44b60e7 100644
--- a/packaging/Mandrake/samba.log
+++ b/packaging/Mandrake/samba.log
@@ -1,4 +1,4 @@
-/var/log/samba/log.nmbd {
+/var/log/samba/log.nmb {
     notifempty
     missingok
     postrotate
@@ -6,7 +6,7 @@
     endscript
 }
 
-/var/log/samba/log.smbd {
+/var/log/samba/log.smb {
     notifempty
     missingok
     postrotate
diff --git a/packaging/Mandrake/samba.xinetd b/packaging/Mandrake/samba.xinetd
index a6dea1f7405..59910336bba 100644
--- a/packaging/Mandrake/samba.xinetd
+++ b/packaging/Mandrake/samba.xinetd
@@ -7,7 +7,7 @@ service swat
 	port	= 901
 	socket_type	= stream
 	wait 	= no
-	only_from = localhost
+	only_from = 127.0.0.1
 	user	= root
 	server	= /usr/sbin/swat
 	log_on_failure	+= USERID
diff --git a/packaging/Mandrake/samba2.spec.tmpl b/packaging/Mandrake/samba2.spec.tmpl
index 5bc92535f80..e21a1484863 100644
--- a/packaging/Mandrake/samba2.spec.tmpl
+++ b/packaging/Mandrake/samba2.spec.tmpl
@@ -1,15 +1,223 @@
-Summary: Samba SMB client and server
-Name: samba
-Version: PVERSION
-Release: PRELEASE
-Copyright: GNU GPL version 2
-Group: Networking
-Source: ftp://samba.org/pub/samba/samba-%{version}.tar.gz
-Packager: Gerald (Jerry) Carter [Samba-Team] <jerry@samba.org>
-Requires: pam >= 0.72 kernel >= 2.2.1 glibc >= 2.1.2
-Prereq: chkconfig fileutils
-BuildRoot: /var/tmp/samba
+%define pkg_name samba
+%define ver 2.2.5
+%define rel 17mdk
+%define vscanver 0.2.5c
+
+# Determine whether this is the system samba or not.
+%define build_system	0
+%if %build_system
+%define samba_major	%{null}
+%else
+%define samba_major	3
+%global _iconsdir	%{_datadir}/icons/
+%global _miconsdir	%{_datadir}/icons/mini
+%global _liconsdir	%{_datadir}/icons/large
+%global _menudir	%{_libdir}/menu
+#%%%%global __prefix		/opt/samba%{samba_major}
+
+%global _mandir		%{_datadir}/man
+%endif
+
+# 2.2.4 and 1 replace by samba-team at release
+%define pversion PVERSION
+%define prelease PRELEASE
+# For testing this setup:
+#%define pversion1 2.2.5
+#%define prelease1 %(date +%Y%m%d)
+
+#Check to see if p(version|release) has been replaced (1 if replaced)
+%define have_pversion %(if [ "%pversion" = `echo "pversion" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi)
+%define have_prelease %(if [ "%prelease" = `echo "prelease" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi)
+
+# We might have a prerelease:
+%define have_pre %(echo %pversion|awk '{p=0} /[a-z,A-Z][a-z,A-Z]/ {p=1} {print p}')
+%if %have_pre
+%define pre_ver %(perl -e '$name="%pversion"; print ($name =~ /(.*?)[a-z]/);')
+%define pre_pre %(echo %pversion|sed -e 's/%pre_ver//g')
+%endif
+
+
+# Check to see if we are running a build from a tarball release from samba.org
+# (%have_pversion) If so, disable vscan, unless explicitly requested
+# (--with vscan).
+%define build_vscan 1
+%if %have_pversion
+%define build_vscan 0
+%{?_with_vscan: %define build_vscan 1}
+%endif
+
+# We now do detection of the Mandrake release we are building on:
+#%define build_cooker %(if [ `awk '{print $3}' /etc/mandrake-release` = "Cooker" ];then echo 1; else echo 0; fi)
+#%define build_cooker %(if [[ `cat /etc/mandrake-release|grep Cooker` ]];then echo 1; else echo 0; fi)
+%define build_mdk91 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.1 ];then echo 1; else echo 0; fi)
+%define build_mdk90 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.0 ];then echo 1; else echo 0; fi)
+%define build_mdk83 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.3 ];then echo 1; else echo 0; fi)
+%define build_mdk82 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.2 ];then echo 1; else echo 0; fi)
+%define build_mdk81 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.1 ];then echo 1; else echo 0; fi)
+%define build_mdk80 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.0 ];then echo 1; else echo 0; fi)
+%define build_mdk72 %(if [ `awk '{print $4}' /etc/mandrake-release` = 7.2 ];then echo 1; else echo 0; fi)
+%define build_non_default 0
+
+# Default options
+%define build_acl 	1
+%define build_winbind 	1
+%define build_wins 	1
+%define build_ldap 	1
+%define build_ads	1
+
+# Set defaults for each version
+%if %build_mdk91
+%endif
+
+%if %build_mdk90
+%endif
+
+%if %build_mdk83
+%endif
+
+%if %build_mdk82
+%endif
+
+%if %build_mdk81
+%define build_winbind	0
+%define build_wins	0
+%endif
+
+%if %build_mdk80
+%define build_acl	0
+%define build_winbind	0
+%define build_wins	0
+%endif
+
+%if %build_mdk72
+%define build_acl	0
+%define build_winbind	0
+%define build_wins	0
+%endif
+
+# Allow commandline option overrides (borrowed from Vince's qmail srpm):
+# To use it, do rpm [-ba|--rebuild] --with 'xxx'
+# Check if the rpm was built with the defaults, otherwise we inform the user
+%define build_non_default 0
+%{?_with_acl: %{expand: %%define build_acl 1}}
+%{?_with_acl: %{expand: %%define build_non_default 1}}
+%{?_without_acl: %{expand: %%define build_acl 0}}
+%{?_without_acl: %{expand: %%define build_non_default 1}}
+%{?_with_winbind: %{expand: %%global build_winbind 1}}
+%{?_with_winbind: %{expand: %%define build_non_default 1}}
+%{?_without_winbind: %{expand: %%define build_winbind 0}}
+%{?_without_winbind: %{expand: %%define build_non_default 1}}
+%{?_with_wins: %{expand: %%global build_wins 1}}
+%{?_with_wins: %{expand: %%define build_non_default 1}}
+%{?_without_wins: %{expand: %%global build_wins 0}}
+%{?_without_wins: %{expand: %%define build_non_default 1}}
+%{?_with_ldap: %{expand: %%global build_ldap 1}}
+%{?_with_ldap: %{expand: %%define build_non_default 1}}
+%{?_without_ldap: %{expand: %%global build_ldap 0}}
+%{?_without_ldap: %{expand: %%define build_non_default 1}}
+%{?_with_ads: %{expand: %%define build_ads 1}}
+%{?_with_ads: %{expand: %%define build_non_default 1}}
+%{?_without_ads: %{expand: %%define build_ads 0}}
+%{?_without_ads: %{expand: %%define build_non_default 1}}
+
+# As if that weren't enough, we're going to try building with antivirus
+# support as an option also
+%define build_fprot 0
+%define build_kaspersky 0
+%define build_mks 0
+%define build_openantivirus 0
+%define build_sophos 0
+%define build_symantec 0
+%define build_trend 0
+%if %build_vscan
+%{?_with_fprot: %{expand: %%global build_fprot 1}}
+%{?_with_kaspersky: %{expand: %%global build_kaspersky 1}}
+%{?_with_mks: %{expand: %%global build_mks 1}}
+%{?_with_openav: %{expand: %%global build_openantivirus 1}}
+%{?_with_sophos: %{expand: %%global build_sophos 1}}
+%{?_with_symantec: %{expand: %%global build_symantec 1}}
+%{?_with_trend: %{expand: %%global build_trend 1}}
+%define vscandir "samba-vscan-%{vscanver}"
+%endif
+%define vfsdir "examples.bin/VFS"
+
+#Workaround missing macros in 8.x:
+%{!?perl_vendorlib: %{expand: %%global perl_vendorlib %{perl_sitearch}/../}}
+
+Summary: Samba SMB server.
+Name: %{pkg_name}%{samba_major}
+%if %have_pversion && %have_pre
+Version: %{pre_ver}
+%define source_ver %{pversion}
+%endif
+%if %have_pversion && !%have_pre
+Version: %{pversion}
+%define source_ver %{pversion}
+%endif
+%if !%have_pversion
+Version: %{ver}
+%define source_ver %{ver}
+%endif
+%if %have_prelease && !%have_pre
+Release: 1.%{prelease}mdk
+%endif
+%if %have_prelease && %have_pre
+Release: 0.%{pre_pre}.%{prelease}mdk
+%endif
+%if !%have_prelease
+Release: %{rel}
+%endif
+License: GPL
+Group: System/Servers
+Source: ftp://samba.org/pub/samba/samba-%{source_ver}.tar.bz2
+URL:	http://www.samba.org
+Source1: samba.log
+Source2: mount.smb
+Source3: samba.xinetd
+Source4: swat_48.xpm.bz2
+Source5: swat_32.xpm.bz2
+Source6: swat_16.xpm.bz2
+Source7: README.%{name}-mandrake-rpm
+%if %build_vscan
+Source8: samba-vscan-%{vscanver}.tar.bz2
+%endif
+Source10: samba-print-pdf.sh.bz2
+Patch1: smbw.patch.bz2
+Patch2: samba-glibc21.patch.bz2
+#Patch3: network-recycle_bin.patch.bz2
+Patch5: samba-2.2.0-gawk.patch.bz2
+Patch12: samba-2.2.0-buildroot.patch.bz2
+#Patch16: samba-mkdir.patch.bz2
+Patch17: samba-3.0-smbmount-sbin.patch.bz2
+#Patches 20-22 to get packaging synced from 2.2.2 to 3.0
+Patch20: samba-3.0-smb.conf.patch.bz2
+Patch21: samba-3.0-winbind.init.patch.bz2
+Patch22: samba-3.0-system-auth-winbind.patch.bz2
+Patch23: samba-3alpha20-destdir.patch.bz2
+#Patch24: samba-3.0alpha13-installman.patch.bz2
+Patch25: samba-3.0alpha13-config_lang.patch.bz2
+#Patch 26 belongs with 20-22
+Patch26: samba-3.0-smb.init.patch.bz2
+Requires: pam >= 0.64, samba-common = %{version}
+BuildRequires: pam-devel autoconf readline-devel
+%if %build_acl
+BuildRequires: libacl-devel
+%endif
+%if %build_mdk72
+BuildRequires: cups-devel
+%else
+BuildRequires: libcups-devel
+%endif
+%if %build_ldap
+BuildRequires: libldap-devel
+%endif
+%if %build_ads
+BuildRequires: libldap-devel krb5-devel
+%endif
+BuildRoot: %{_tmppath}/%{name}-root
 Prefix: /usr
+Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall
+Prereq: fileutils sed /bin/grep
 
 %description
 Samba provides an SMB server which can be used to provide
@@ -21,16 +229,57 @@ in Linux. Samba uses NetBIOS over TCP/IP (NetBT) protocols
 and does NOT need NetBEUI (Microsoft Raw NetBIOS frame)
 protocol.
 
-Samba-2.2 features working NT Domain Control capability and 
-includes the SWAT (Samba Web Administration Tool) that 
-allows samba's smb.conf file to be remotely managed using your 
+Samba-3.0 features working NT Domain Control capability and
+includes the SWAT (Samba Web Administration Tool) that
+allows samba's smb.conf file to be remotely managed using your
 favourite web browser. For the time being this is being
-enabled on TCP port 901 via inetd.
+enabled on TCP port 901 via xinetd. SWAT is now included in
+it's own subpackage, samba-swat.
 
-Users are advised to use Samba-2.2 as a Windows NT4
-Domain Controller only on networks that do NOT have a Windows
-NT Domain Controller. This release does NOT as yet have
-Backup Domain control ability.
+Please refer to the WHATSNEW.txt document for fixup information.
+This binary release includes encrypted password support.
+
+Please read the smb.conf file and ENCRYPTION.txt in the
+docs directory for implementation details.
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+%if %build_non_default
+WARNING: This RPM was built with command-line options. Please
+see README.%{name}-mandrake-rpm in the documentation for
+more information.
+%endif
+
+%package server
+URL:	http://www.samba.org
+Summary: Samba (SMB) server programs.
+Requires: %{name}-common = %{version}
+Group: Networking/Other
+Provides: samba
+Obsoletes: samba
+%if %build_system
+Obsoletes: samba-server-ldap
+Obsoletes: samba3-server
+%else
+Provides: samba-server
+%endif
+
+%description server
+Samba-server provides a SMB server which can be used to provide
+network services to SMB (sometimes called "Lan Manager")
+clients. Samba uses NetBIOS over TCP/IP (NetBT) protocols
+and does NOT need NetBEUI (Microsoft Raw NetBIOS frame)
+protocol.
+
+Samba-3.0 features working NT Domain Control capability and
+includes the SWAT (Samba Web Administration Tool) that
+allows samba's smb.conf file to be remotely managed using your
+favourite web browser. For the time being this is being
+enabled on TCP port 901 via xinetd. SWAT is now included in
+it's own subpackage, samba-swat.
 
 Please refer to the WHATSNEW.txt document for fixup information.
 This binary release includes encrypted password support.
@@ -38,263 +287,1434 @@ This binary release includes encrypted password support.
 Please read the smb.conf file and ENCRYPTION.txt in the
 docs directory for implementation details.
 
-%changelog
-* Mon May 21 2001 Gerald (Jerry) Carter <jerry@samba.org>
-  - removed docs/htmldocs and docs/manpages from /usr/share/docs
-    These het installed in /usr/share/swat already
-  - Fix for codepages and src not getting installed in the RPM
-  - Fixed minor typos
+%if %build_ldap
+This package was compiled with LDAP support, which means that 
+passwords can be stored in LDAP or in smbpasswd files.
+To migrate your passwords from smbpasswd into LDAP, try
+examples/LDAP/import_smbpasswd.pl using:
+%{_datadir}/%{name}/scripts/import_smbpasswd.pl </etc/%{name}/smbpasswd
+
+Scripts for managing users in LDAP have been added to 
+%{_datadir}/%{name}/scripts, configuration is in /etc/%{name}/smbldap_conf.pm
+%endif
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+%package client
+URL:	http://www.samba.org
+Summary: Samba (SMB) client programs.
+Group: Networking/Other
+Requires: %{name}-common = %{version}
+Obsoletes: smbfs
+%if %build_system
+Obsoletes: samba3-client
+%else
+Provides: samba-client
+%endif
+
+%description client
+Samba-client provides some SMB clients, which complement the built-in
+SMB filesystem in Linux. These allow the accessing of SMB shares, and
+printing to SMB printers.
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+%package common
+URL:	http://www.samba.org
+Summary: Files used by both Samba servers and clients.
+Group: System/Servers
+%if %build_system
+Obsoletes: samba-common-ldap
+Obsoletes: samba3-common
+%else
+Provides: samba-common
+%endif
+
+%description common
+Samba-common provides files necessary for both the server and client
+packages of Samba.
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+%package doc
+URL:	http://www.samba.org
+Summary: Documentation for Samba servers and clients.
+Group: System/Servers
+Requires: %{name}-common = %{version}
+%if %build_system
+Obsoletes: samba3-doc
+%else
+Provides: samba-doc
+%endif
+
+%description doc
+Samba-doc provides documentation files for both the server and client
+packages of Samba.
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+%package swat
+URL:	http://www.samba.org
+Summary: The Samba Web Administration Tool.
+Requires: %{name}-server = %{version}
+Requires: xinetd
+Group: System/Servers
+%if %build_system
+Obsoletes: samba-swat-ldap
+Obsoletes: samba3-swat
+%else
+Provides: samba-swat
+%endif
+
+%description swat
+SWAT (the Samba Web Administration Tool) allows samba's smb.conf file
+to be remotely managed using your favourite web browser. For the time
+being this is being enabled on TCP port 901 via xinetd. Note that
+SWAT does not use SSL encryption, nor does it preserve comments in
+your smb.conf file. Webmin uses SSL encryption by default, and
+preserves comments in configuration files, even if it does not display
+them, and is therefore the preferred method for remotely managing
+Samba.
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+%if %build_winbind
+%package winbind
+URL:	http://www.samba.org
+Summary: Samba-winbind daemon, utilities and documentation
+Group: System/Servers
+Requires: %{name}-common = %{version}
+%description winbind
+Provides the winbind daemon and testing tools to allow authentication 
+and group/user enumeration from a Windows or Samba domain controller.
+%endif
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+%if %build_wins
+%package -n nss_wins%{samba_major}
+URL:	http://www.samba.org
+Summary: Name Service Switch service for WINS
+Group: System/Servers
+Requires: %{name}-common = %{version}
+PreReq: glibc
+%description -n nss_wins%{samba_major}
+Provides the libnss_wins shared library which resolves NetBIOS names to 
+IP addresses.
+%endif
+
+%if !%build_system
+NOTE: This is a prerelease of samba-%{samba_major}, not intended
+for production use. If something breaks, file a bug report.
+%endif
+
+#Antivirus packages:
+%if %build_fprot
+%package vscan-fprot
+Summary: On-access virus scanning for samba using FPROT
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Autoreq: 0
+%description vscan-fprot
+A vfs-module for samba to implement on-access scanning using the
+FPROT antivirus software (which must be installed to use this).
+%endif
+
+%if %build_kaspersky
+%package vscan-kaspersky
+Summary: On-access virus scanning for samba using Kaspersky
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Autoreq: 0
+%description vscan-kaspersky
+A vfs-module for samba to implement on-access scanning using the
+Kaspersky antivirus software (which must be installed to use this).
+%endif
+
+%if %build_mks
+%package vscan-mks
+Summary: On-access virus scanning for samba using MKS
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Autoreq: 0
+%description vscan-mks
+A vfs-module for samba to implement on-access scanning using the
+MKS antivirus software (which must be installed to use this).
+%endif
 
-* Mon Apr 23 2001 Gerald (Jerry) Carter <jerry@samba.org>
-  - Added a few bug fixes to release the first Mandrake RPMS
+%if %build_openantivirus
+%package vscan-openantivirus
+Summary: On-access virus scanning for samba using OpenAntivirus
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Autoreq: 0
+%description vscan-openantivirus
+A vfs-module for samba to implement on-access scanning using the
+OpenAntivirus antivirus software (which must be installed to use this).
+%endif
+
+%if %build_sophos
+%package vscan-sophos
+Summary: On-access virus scanning for samba using Sophos
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Autoreq: 0
+%description vscan-sophos
+A vfs-module for samba to implement on-access scanning using the
+Sophos antivirus software (which must be installed to use this).
+%endif
 
-* Sat Apr 14 2001 John H Terpstra <jht@samba.org>
-  - Added official samba-team support for Mandrakesoft
-	- We get a lot of requests for this!
+%if %build_symantec
+%package vscan-symantec
+Summary: On-access virus scanning for samba using Symantec
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Autoreq: 0
+%description vscan-symantec
+A vfs-module for samba to implement on-access scanning using the
+Symantec antivirus software (which must be installed to use this).
+%endif
+
+%if %build_trend
+%package vscan-trend
+Summary: On-access virus scanning for samba using Trend
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Autoreq: 0
+%description vscan-trend
+A vfs-module for samba to implement on-access scanning using the
+Trend antivirus software (which must be installed to use this).
+%endif
 
 %prep
-%setup
+# Build a summary of how this RPM was built:
+%if %build_acl
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with acl"
+%else
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without acl"
+%endif
+%if %build_winbind
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with winbind"
+%else
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without winbind"
+%endif
+%if %build_wins
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with wins"
+%else
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without wins"
+%endif
+%if %build_ldap
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with ldap"
+%else
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without ldap"
+%endif 
+%if %build_ads
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with ads"
+%else
+RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without ads"
+%endif
 
-%build
-cd source
+%if %build_non_default
+echo "Building a non-default rpm with the following command-line arguments:"
+echo "$RPM_EXTRA_OPTIONS"
+echo "This rpm was built with non-default options, thus, to build ">%{SOURCE7}
+echo "an identical rpm, you need to supply the following options">>%{SOURCE7}
+echo "at build time: $RPM_EXTRA_OPTIONS">>%{SOURCE7}
+echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7}
+%else 
+echo "This rpm was built with default options">%{SOURCE7}
+echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7}
+%endif
+
+%if %build_vscan
+%setup -q -a 8 -n %{pkg_name}-%{source_ver}
+%else
+%setup -q -n %{pkg_name}-%{source_ver}
+%endif
+#%patch111 -p1
+%patch1 -p1 -b .smbw
+#%patch3 -p1 -b .net-r_bin
+%patch5 -p1 -b .gawk
+#%patch6 -p1
+%patch12 -p1 -b .buildroot
+%patch17 -p1 -b .sbin
+%patch20 -p1 -b .samba222
+%patch21 -p1 -b .samba222
+%patch22 -p1 -b .samba222
+%patch23 -p1 -b .destdir
+#%patch24 -p1 -b .langen
+%patch25 -p1 -b .multilang
+%patch26 -p1 -b .samba222
+cp %{SOURCE7} .
 
-%ifarch ia64
-libtoolize --copy --force     # get it to recognize IA-64
+# Make a copy of examples so that we have a clean one for doc:
+cp -a examples examples.bin
+
+%if %build_vscan
+# put antivirus files in examples.bin/VFS/
+for av in fprot kaspersky mks openantivirus sophos symantec trend; do
+	cp -a %{vscandir}/$av %{vfsdir}
+done
+%endif
+
+# Edit some files when not building system samba:
+%if !%build_system
+perl -pi -e 's/%{pkg_name}/%{name}/g' source/auth/pampass.c
+%endif
+
+%build
+#%serverbuild
+(cd source
 autoconf
-autoheader
-EXTRA="-D_LARGEFILE64_SOURCE"
-%endif
-
-NUMCPU=`grep processor /proc/cpuinfo | wc -l`
-
-CFLAGS="$RPM_OPT_FLAGS $EXTRA" ./configure \
-	--prefix=%{prefix} \
-	--with-fhs \
-	--libdir=/etc/samba \
-	--localstatedir=/var \
-	--with-codepagedir=%{prefix}/share/samba/codepages \
-	--with-configdir=/etc/samba \
-	--with-lockdir=/var/lock/samba \
-	--with-swatdir=%{prefix}/share/swat \
-	--with-quotas \
-	--with-smbmount \
-	--with-pam \
-	--with-pam_smbpass \
-	--with-syslog \
-	--with-utmp \
-	--with-netatalk \
-	--with-sambabook=%{prefix}/share/swat/using_samba
-
-make -j${NUMCPU} proto
-make -j${NUMCPU} all smbfilter nsswitch/libnss_wins.so debug2html
+CPPFLAGS="-I/usr/include/openssl"; export CPPFLAGS
+CFLAGS="$RPM_OPT_FLAGS"
+%configure      --prefix=%{_prefix} \
+                --with-fhs \
+                --libdir=/etc/%{name} \
+                --sysconfdir=/etc/%{name} \
+                --localstatedir=/var \
+                --with-configdir=/etc/%{name} \
+                --with-codepagedir=/var/lib/%{name}/codepages \
+                --with-privatedir=/etc/%{name} \
+                --with-swatdir=%{_datadir}/swat%{samba_major} \
+                --with-smbmount \
+                --with-syslog \
+                --with-automount \
+                --with-pam \
+                --with-vfs \
+                --with-utmp \
+                --with-msdfs \
+                --with-smbwrapper \
+		--with-manpages-langs=en	\
+		--with-logfilebase=/var/log/%{name} \
+		--with-lockdir=/var/cache/%{name} \
+		--with-piddir=/var/run/%{name} \
+%if !%build_system
+		--program-suffix=%{samba_major} \
+%endif		
+%if %build_acl
+		--with-acl-support      \
+%endif
+%if !%build_ldap
+		--with-ldap=no		\
+%endif
+%if !%build_ads
+		--with-ads=no	\
+%endif
+                --with-quotas
+#                --with-pam_smbpass \
+#		--with-manpages-langs=en,ja,pl	\
+
+#make CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE" all
+make CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE" \
+	all smbfilter smbwrapper smbcacls pam_smbpass nsswitch nsswitch/libnss_wins.so debug2html
+# Build VFS modules (experimental)
+cd ../%vfsdir
+%configure	--prefix=%{prefix} \
+		--mandir=%{prefix}/share/man
+make
+#make CFLAGS="$RPM_OPT_FLAGS -I../../source -I../../source/include -I../../source/ubiqx \
+#	-I../../source/smbwrapper -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE"
+)
+
+# Build mkntpasswd in examples/LDAP/ for smbldaptools
+(
+cd examples.bin/LDAP/smbldap-tools/mkntpwd
+make
+)
+
+# Build antivirus vfs objects:
+%if %build_fprot
+echo "Building fprot"
+%endif
+%if %build_kaspersky
+echo "Building Kaspersky"
+(cd %{vfsdir}/kaspersky;make)
+%endif
+%if %build_mks
+echo "Building mks"
+(cd %{vfsdir}/mks;make)
+%endif
+%if %build_openantivirus
+echo "Building OpenAntivirus"
+(cd %{vfsdir}/openantivirus;make)
+%endif
+%if %build_sophos
+echo "building sophos"
+(cd %{vfsdir}/sophos;make)
+%endif
+%if %build_symantec
+echo "Building symantec"
+(cd %{vfsdir}/symantec;make)
+%endif
+%if %build_trend
+echo "Building Trend"
+(cd %{vfsdir}/trend;make)
+%endif
 
 %install
 rm -rf $RPM_BUILD_ROOT
 mkdir -p $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/etc/{logrotate.d,pam.d,samba,xinetd.d}
-mkdir -p $RPM_BUILD_ROOT/etc/samba/security
+
+# Any entries here mean samba makefile is *really* broken:
+mkdir -p $RPM_BUILD_ROOT/etc/%{name}
+mkdir -p $RPM_BUILD_ROOT/%{_datadir}
+
+(cd source
+make DESTDIR=$RPM_BUILD_ROOT install)
+
+#need to stay
+mkdir -p $RPM_BUILD_ROOT/sbin
+mkdir -p $RPM_BUILD_ROOT/etc/{logrotate.d,pam.d,xinetd.d}
 mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d
+mkdir -p $RPM_BUILD_ROOT/var/cache/%{name}
+mkdir -p $RPM_BUILD_ROOT/var/log/%{name}
+mkdir -p $RPM_BUILD_ROOT/var/run/%{name}
+mkdir -p $RPM_BUILD_ROOT/var/spool/%{name}
+mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/{netlogon,profiles,printers}
+mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/printers/{W32X86,WIN40,W32ALPHA,W32MIPS,W32PPC}
+mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/codepages/src
 mkdir -p $RPM_BUILD_ROOT/lib/security
-mkdir -p $RPM_BUILD_ROOT%{prefix}/{bin,sbin}
-mkdir -p $RPM_BUILD_ROOT/home/samba
-mkdir -p $RPM_BUILD_ROOT/sbin
-mkdir -p $RPM_BUILD_ROOT%{prefix}/share/swat/{images,help,include}
-mkdir -p $RPM_BUILD_ROOT%{prefix}/share/samba/codepages/src 
-mkdir -p $RPM_BUILD_ROOT%{prefix}/share/swat/using_samba/{figs,gifs}
-mkdir -p $RPM_BUILD_ROOT%{prefix}/share/man/{man1,man5,man7,man8}
-mkdir -p $RPM_BUILD_ROOT/var/lock/samba
-mkdir -p $RPM_BUILD_ROOT/var/log/samba
-mkdir -p $RPM_BUILD_ROOT/var/spool/samba
-
-# Install standard binary files
-for i in nmblookup smbclient smbpasswd smbstatus testparm testprns \
-   make_smbcodepage make_unicodemap make_printerdef rpcclient smbspool \
-   smbmount smbumount smbmnt
-do
-	install -m755 -s source/bin/$i $RPM_BUILD_ROOT%{prefix}/bin
-done
-for i in smbtar
+mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib
+mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts
+
+#smbwrapper and pam_winbind not handled by make, pam_smbpass.so doesn't build
+install -m 755 source/bin/smbwrapper.so $RPM_BUILD_ROOT%{_libdir}/smbwrapper%{samba_major}.so
+#install -m 755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/lib/security/pam_smbpass.so
+install -m 755 source/nsswitch/pam_winbind.so $RPM_BUILD_ROOT/lib/security/pam_winbind%{samba_major}.so
+
+# Install VFS modules
+#install -m755 %vfsdir/audit.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs
+#for i in block recycle
+#do
+# install -m755 %vfsdir/$i/$i.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs
+#done
+
+# Antivirus support:
+#	mkdir -p $RPM_BUILD_ROOT%{_libdir}/samba/vfs/vscan
+	for av in fprotd kavp mksd oav sophos symantec trend; do
+		if [ -d %{vfsdir}/$av -a -e %{vfsdir}/$av/vscan-$av.so ];then
+			cp %{vfsdir}/$av/vscan-$av.so \
+				$RPM_BUILD_ROOT%{_libdir}/samba/vfs/
+		fi
+	done
+	
+#These scripts are not handled by make:
+#for i in addtosmbpass mksmbpasswd.sh smbtar convert_smbpasswd
+for i in addtosmbpass mksmbpasswd.sh convert_smbpasswd
 do
-	install -m755 source/script/$i $RPM_BUILD_ROOT%{prefix}/bin
+  install -m755 source/script/$i $RPM_BUILD_ROOT/%{_bindir}
 done
 
-# Install secure binary files
-for i in smbd nmbd swat debug2html smbfilter
-do
-	install -m755 -s source/bin/$i $RPM_BUILD_ROOT%{prefix}/sbin
+#libnss_* not handled by make:
+# Install the nsswitch library extension file
+for i in wins winbind; do
+  install -m755 source/nsswitch/libnss_${i}.so $RPM_BUILD_ROOT/lib/libnss_${i}%{samba_major}.so
 done
+# Make link for wins and winbind resolvers
+( cd $RPM_BUILD_ROOT/lib; ln -s libnss_wins%{samba_major}.so libnss_wins%{samba_major}.so.2; ln -s libnss_winbind%{samba_major}.so libnss_winbind%{samba_major}.so.2)
 
-# we need a symlink for mount to recognise the smb and smbfs filesystem types
-ln -sf %{prefix}/bin/smbmount $RPM_BUILD_ROOT/sbin/mount.smbfs
-ln -sf %{prefix}/bin/smbmount $RPM_BUILD_ROOT/sbin/mount.smb
+# Install other stuff
 
-# Install codepage source files
-for i in 437 737 775 850 852 861 866 932 936 949 950 1251; do
-	install -m644 source/codepages/codepage_def.$i $RPM_BUILD_ROOT%{prefix}/share/samba/codepages/src
-done
-for i in 437 737 850 852 861 866 932 936 949 950 ISO8859-1 ISO8859-2 ISO8859-5 ISO8859-7 KOI8-R; do
-	install -m644 source/codepages/CP$i.TXT $RPM_BUILD_ROOT%{prefix}/share/samba/codepages/src
-done
+#        install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT/etc/samba/
+        install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/etc/%{name}/smb.conf
+        install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT/etc/%{name}/smbusers
+        install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT/%{_bindir}
+        #install -m755 packaging/RedHat/smbadduser $RPM_BUILD_ROOT/usr/bin
+        install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT/%{_bindir}
+        install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/etc/rc.d/init.d/smb%{samba_major}
+        install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_sbindir}/%{name}
+	install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/etc/rc.d/init.d/winbind%{samba_major}
+	install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_sbindir}/winbind%{samba_major}
+        install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/etc/pam.d/%{name}
+	install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major}
+#
+        install -m644 $RPM_SOURCE_DIR/samba.log $RPM_BUILD_ROOT/etc/logrotate.d/%{name}
+#	install -m644 packaging/Mandrake/samba-slapd-include.conf $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/samba-slapd.include
 
-# Install the nsswitch library extenstion file
-install -m755 source/nsswitch/libnss_wins.so $RPM_BUILD_ROOT/lib
-# Make link for wins resolver
-( cd $RPM_BUILD_ROOT/lib; ln -s libnss_wins.so libnss_wins.so.2; )
+# Install smbldap-tools scripts:
+#for i in examples/LDAP/smbldap-tools/*.pl; do
+#	install -m 750 $i $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+#done
 
-# PAM Authentication file
-install -m755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/lib/security
+#install -m 750 examples/LDAP/smbldap-tools/smbldap_tools.pm $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
 
-# Install SWAT helper files
-for i in swat/help/*.html docs/htmldocs/*.html; do
-	install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/help
-done
-for i in swat/images/*.gif; do
-	install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/images
-done
-for i in swat/include/*.html; do
-	install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/include
-done
+# The conf file	
+#install -m 640 examples/LDAP/smbldap-tools/smbldap_conf.pm $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}
 
-# This is the O'Reily Samba Book - on-line
-for i in docs/htmldocs/using_samba/*.html; do
-	install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/using_samba
-done
-for i in docs/htmldocs/using_samba/figs/*.gif; do
-	install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/using_samba/figs
+# Link both smbldap*.pm into vendor-perl (any better ideas?)
+#mkdir -p %{buildroot}/%{perl_vendorlib}
+#ln -s %{_sysconfdir}/%{name}/smbldap_conf.pm $RPM_BUILD_ROOT/%{perl_vendorlib}
+#ln -s %{_datadir}/%{name}/scripts/smbldap_tools.pm $RPM_BUILD_ROOT/%{perl_vendorlib}
+
+#mkntpwd
+#install -m750 examples.bin/LDAP/smbldap-tools/mkntpwd/mkntpwd %{buildroot}/%{_sbindir}
+
+# Samba smbpasswd migration script:
+install -m700 examples/LDAP/export_smbpasswd.pl $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+install -m700 examples/LDAP/import_smbpasswd.pl $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+
+
+
+# make a conf file for winbind from the default one:
+	cat packaging/Mandrake/smb.conf|sed -e  's/^;  winbind/  winbind/g;s/^;  obey pam/  obey pam/g; s/^;   printer admin = @"D/   printer admin = @"D/g;s/^;   password server = \*/   password server = \*/g;s/^;  template/  template/g; s/^   security = user/   security = domain/g' > packaging/Mandrake/smb-winbind.conf
+        install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/etc/%{name}/smb-winbind.conf
+
+# Link smbmount to /sbin/mount.smb and /sbin/mount.smbfs
+#I don't think it's possible for make to do this ...
+        ln -s $RPM_BUILD_ROOT/%{_bindir}/smbmount%{samba_major} $RPM_BUILD_ROOT/sbin/mount.smb%{samba_major}
+        ln -s $RPM_BUILD_ROOT/%{_bindir}/smbmount%{samba_major} $RPM_BUILD_ROOT/sbin/mount.smbfs%{samba_major}
+        echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/etc/%{name}/lmhosts
+
+# Link smbspool to CUPS (does not require installed CUPS)
+
+        mkdir -p $RPM_BUILD_ROOT/%{_libdir}/cups/backend
+        ln -s %{_bindir}/smbspool $RPM_BUILD_ROOT/%{_libdir}/cups/backend/smb%{samba_major}
+
+# xinetd support
+
+        mkdir -p $RPM_BUILD_ROOT/etc/xinetd.d
+        install -m644 %{SOURCE3} $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major}
+
+# menu support
+
+mkdir -p $RPM_BUILD_ROOT%{_menudir}
+cat > $RPM_BUILD_ROOT%{_menudir}/%{name} << EOF
+?package(%{name}):command="gnome-moz-remote http://localhost:901/" needs="gnome" \
+icon="swat%{samba_major}.xpm" section="Configuration/Networking" title="Samba Configuration" \
+longtitle="The Swat Samba Administration Tool"
+?package(%{name}):command="sh -c '\$BROWSER http://localhost:901/'" needs="x11" \
+icon="swat%{samba_major}.xpm" section="Configuration/Networking" title="Samba Configuration" \
+longtitle="The Swat Samba Administration Tool"
+EOF
+
+mkdir -p $RPM_BUILD_ROOT%{_liconsdir} $RPM_BUILD_ROOT%{_iconsdir} $RPM_BUILD_ROOT%{_miconsdir}
+
+bzcat %{SOURCE4} > $RPM_BUILD_ROOT%{_liconsdir}/swat%{samba_major}.xpm
+bzcat %{SOURCE5} > $RPM_BUILD_ROOT%{_iconsdir}/swat%{samba_major}.xpm
+bzcat %{SOURCE6} > $RPM_BUILD_ROOT%{_miconsdir}/swat%{samba_major}.xpm
+
+bzcat %{SOURCE10}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/print-pdf
+
+# Fix configs when not building system samba:
+%if !%build_system
+# Work around non-existent but claimed --program-suffix support :-(
+for dir in %{_sbindir} %{_bindir};do
+    FILES=`find %{buildroot}$dir -type f |grep -v "\."|grep -v %{samba_major}$`
+    for OLD in $FILES; do
+        NEW=`echo ${OLD}%{samba_major}`
+        mv $OLD $NEW
+    done
 done
-for i in docs/htmldocs/using_samba/gifs/*.gif; do
-	install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/using_samba/gifs
+# And the man pages too:
+FILES=`find %{buildroot}%{_mandir} -type f `
+for OLD in $FILES; do
+    BASE=`perl -e '$name="'${OLD}'"; print "",($name =~ /(.*?)\.[0-9]/), "\n";'`
+    EXT=`echo $OLD|sed -e 's,'${BASE}',,g'`
+    NEW=`echo ${BASE}%{samba_major}${EXT}`
+    mv $OLD $NEW
+done		
+# Replace paths in config files and init scripts:
+for i in smb winbind;do
+	perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/etc/rc.d/init.d/${i}%{samba_major}
 done
-
-# Install the miscellany
-install -m644 swat/README $RPM_BUILD_ROOT%{prefix}/share/swat
-# Install level 1 man pages
-for i in *.1; do
-	install -m644 docs/manpages/$i $RPM_BUILD_ROOT%{prefix}/share/man/man1
+for i in /etc/%{name}/smb.conf /etc/rc.d/init.d/smb%{samba_major} %{_sbindir}/%{name} /etc/rc.d/init.d/winbind%{samba_major} %{_sbindir}/winbind%{samba_major} /etc/logrotate.d/%{name} /etc/xinetd.d/swat%{samba_major}; do
+	perl -pi -e 's,/%{pkg_name},/%{name},g; s,smbd,%{_sbindir}/smbd%{samba_major},g; s,nmbd,%{_sbindir}/nmbd%{samba_major},g; s,winbindd,%{_sbindir}/winbindd%{samba_major},g; s,/usr/sbin/swat,%{_sbindir}/swat%{samba_major},g' $RPM_BUILD_ROOT/$i;
 done
-install -m644 docs/manpages/smb.conf.5 $RPM_BUILD_ROOT%{prefix}/share/man/man5
-install -m644 docs/manpages/lmhosts.5 $RPM_BUILD_ROOT%{prefix}/share/man/man5
-install -m644 docs/manpages/smbpasswd.5 $RPM_BUILD_ROOT%{prefix}/share/man/man5
-
-install -m644 docs/manpages/samba.7 $RPM_BUILD_ROOT%{prefix}/share/man/man7
-
-install -m644 docs/manpages/smbd.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-install -m644 docs/manpages/nmbd.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-install -m644 docs/manpages/smbpasswd.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-install -m644 docs/manpages/swat.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-install -m644 docs/manpages/smbmount.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-install -m644 docs/manpages/smbmnt.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-install -m644 docs/manpages/smbumount.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-install -m644 docs/manpages/smbspool.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8
-
-install -m644 swat/README $RPM_BUILD_ROOT%{prefix}/share/swat
-
-install -m644 packaging/Mandrake/smb.con* $RPM_BUILD_ROOT/etc/samba/
-install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT/etc/samba/smbusers
-install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT%{prefix}/bin
-install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT%{prefix}/bin
-install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/etc/rc.d/init.d/smb
-install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT%{prefix}/sbin/samba
-install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/etc/pam.d/samba
-install -m644 packaging/Mandrake/samba.log $RPM_BUILD_ROOT/etc/logrotate.d/samba
-install -m644 packaging/Mandrake/samba.xinetd $RPM_BUILD_ROOT/etc/xinetd.d/swat
-echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/etc/samba/lmhosts
-
-##
-## remove these directories so they don't get installed twice
-##
-/bin/rm -rf docs/htmldocs
-/bin/rm -rf docs/manpages
-
+# Fix pam files
+perl -pi -e 's/winbind/winbind%{samba_major}/g' $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major}
+# Fix xinetd file for swat:
+perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major}
+%endif
 
 %clean
 rm -rf $RPM_BUILD_ROOT
 
-%post
-/sbin/chkconfig --add smb
-/sbin/chkconfig smb off
+%post server
+
+/sbin/chkconfig --level 35 smb%{samba_major} on
 
-# Build codepage load files
-cd %{prefix}/share/samba/codepages
-for i in 437 737 775 850 852 861 866 932 936 949 950 1251
+# Add a unix group for samba machine accounts
+groupadd -frg 421 machines
+
+# Migrate tdb's from /var/lock/samba (taken from official samba spec file):
+for i in /var/lock/samba/*.tdb
 do
-%{prefix}/bin/make_smbcodepage c $i %{prefix}/share/samba/codepages/src/codepage_def.$i %{prefix}/share/samba/codepages/codepage.$i
+if [ -f $i ]; then
+	newname=`echo $i | sed -e's|var\/lock\/samba|var\/cache\/samba|'`
+	echo "Moving $i to $newname"
+	mv $i $newname
+fi
 done
-for i in 437 737 850 852 861 866 932 936 949 950 ISO8859-1 ISO8859-2 ISO8859-5 ISO8859-7 KOI8-R
-do
-%{prefix}/bin/make_unicodemap $i %{prefix}/share/samba/codepages/src/CP$i.TXT %{prefix}/share/samba/codepages/unicode_map.$i
+
+# Remove the transient tdb files (modified from version in off. samba spec:
+for TDB in brlock unexpected locking messages; do
+        if [ -e /var/cache/%{name}/$TDB.tdb ]; then
+                rm -f /var/cache/%{name}/$TDB.tdb;
+        fi;
 done
 
-# Add swat entry to /etc/services if not already there
-if !( grep ^[:space:]*swat /etc/services > /dev/null ) then
-	echo 'swat		901/tcp				# Add swat service used via inetd' >> /etc/services
+if [ -d /var/lock/samba ]; then
+        rm -rf /var/lock/samba
 fi
 
-%preun
-if [ $1 = 0 ] ; then
-    /sbin/chkconfig --del smb
+%post common
+# Basic migration script for pre-2.2.1 users,
+# since smb config moved from /etc to /etc/samba
+
+# Let's create a proper /etc/samba/smbpasswd file
+[ -f /etc/%{name}/smbpasswd ] || {
+	echo "Creating password file for samba..."
+	touch /etc/%{name}/smbpasswd
+}
+
+# And this too, in case we don't have smbd to create it for us
+[ -f /var/cache/%{name}/unexpected.tdb ] || {
+	touch /var/cache/%{name}/unexpected.tdb
+}
+
+# Let's define the proper paths for config files
+perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' /etc/%{name}/smb.conf
+
+# Fix the logrotate.d file from smb and nmb to smbd and nmbd
+if [ -f /etc/logrotate.d/samba ]; then
+        perl -pi -e 's/smb /smbd /' /etc/logrotate.d/samba
+        perl -pi -e 's/nmb /nmbd /' /etc/logrotate.d/samba
+fi
+
+# And not loose our machine account SID
+[ -f /etc/MACHINE.SID ] && mv -f /etc/MACHINE.SID /etc/%{name}/ ||:
+
+%if %build_winbind
+%post winbind
+if [ $1 = 1 ]; then
+    /sbin/chkconfig winbind%{samba_major} on
+    cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave
+    cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp
+    for i in passwd group;do
+        grep ^$i /etc/nsswitch.conf |grep -v 'winbind%{samba_major}' >/dev/null
+        if [ $? = 0 ];then
+            echo "Adding a winbind%{samba_major} entry to the $i section of /etc/nsswitch.conf"
+            awk '/^'$i'/ {print $0 " winbind%{samba_major}"};!/^'$i'/ {print}' /etc/nsswitch.conf.rpmtemp >/etc/nsswitch.conf;
+	    cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp
+        else
+            echo "$i entry found in /etc/nsswitch.conf"
+        fi
+    done
+    if [ -f /etc/nsswitch.conf.rpmtemp ];then rm -f /etc/nsswitch.conf.rpmtemp;fi
+fi
+
+%preun winbind
+if [ $1 = 0 ]; then
+	echo "Removing winbind%{samba_major} entries from /etc/nsswitch.conf"
+	perl -pi -e 's/ winbind%{samba_major}//' /etc/nsswitch.conf
+
+	/sbin/chkconfig winbind%{samba_major} reset
+fi
+%endif %build_winbind
 
-    # We want to remove the browse.dat file
-    if [ -e /var/lock/samba/browse.dat ]; then
-	    rm -f /var/lock/samba/browse.dat
+%if %build_wins
+%post -n nss_wins%{samba_major}
+if [ $1 = 1 ]; then
+    cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave
+    grep '^hosts' /etc/nsswitch.conf |grep -v 'wins%{samba_major}' >/dev/null
+    if [ $? = 0 ];then
+        echo "Adding a wins entry to the hosts section of /etc/nsswitch.conf"
+        awk '/^hosts/ {print $0 " wins%{samba_major}"};!/^hosts/ {print}' /etc/nsswitch.conf.rpmsave >/etc/nsswitch.conf;
+    else
+        echo "wins entry found in /etc/nsswitch.conf"
     fi
+#    else
+#        echo "Upgrade, leaving nsswitch.conf intact"
+fi
+
+%preun -n nss_wins%{samba_major}
+if [ $1 = 0 ]; then
+	echo "Removing wins entry from /etc/nsswitch.conf"
+	perl -pi -e 's/ wins%{samba_major}//' /etc/nsswitch.conf
+#else
+#	echo "Leaving /etc/nsswitch.conf intact"
 fi
+%endif %build_wins
+
+%preun
+
+/sbin/chkconfig --level 35 smb%{samba_major} reset
 
-%postun
-# Only delete remnants of samba if this is the final deletion.
 if [ $1 = 0 ] ; then
-    if [ -x /etc/pam.d/samba ]; then
-      rm -f /etc/pam.d/samba
-    fi
-    if [ -e /var/log/samba ]; then
-      rm -rf /var/log/samba
+%_preun_service smb%{samba_major}
+#    /sbin/chkconfig --level 35 smb reset
+# Let's not loose /var/cache/samba
+
+#    for i in browse.dat wins.dat brlock.tdb unexpected.tdb connections.tdb \
+#locking.tdb messages.tdb;do
+#        if [ -e /var/cache/samba/$i ]; then
+#                mv -f /var/cache/samba/$i /var/cache/samba/$i.BAK
+#        fi;
+#    done
+    if [ -d /var/log/%{name} ]; then
+      rm -rf /var/log/%{name}/*
     fi
-    if [ -e /var/lock/samba ]; then
-      rm -rf /var/lock/samba
+    if [ -d /var/cache/%{name} ]; then
+      mv -f /var/cache/%{name} /var/cache/%{name}.BAK
     fi
+fi
+
+%post swat
+if [ -f /var/lock/subsys/xinetd ]; then
+        service xinetd reload >/dev/null 2>&1 || :
+fi
+%update_menus
 
-    # Remove swat entries from /etc/inetd.conf and /etc/services
-    cd /etc
-    tmpfile=/etc/tmp.$$
-    sed -e '/^[:space:]*swat.*$/d' /etc/services > $tmpfile
-    mv $tmpfile services
+%postun swat
+
+# Remove swat entry from xinetd
+if [ $1 = 0 -a -f /etc/xinetd.conf ] ; then
+rm -f /etc/xinetd.d/swat%{samba_major}
+	service xinetd reload &>/dev/null || :
 fi
 
-%triggerpostun -- samba < samba-2.0.0
-if [ $0 != 0 ]; then
-    /sbin/chkconfig --add smb
+if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
+
+%clean_menus
+
+%triggerpostun -- samba < 1.9.18p7
+
+if [ $1 != 0 ]; then
+    /sbin/chkconfig --level 35 smb on
 fi
 
-%files
+%triggerpostun -- samba < 2.0.5a-3, samba >= 2.0.0
+
+if [ $1 != 0 ]; then
+        [ ! -d /var/lock/samba ] && mkdir -m 0755 /var/lock/samba ||:
+        [ ! -d /var/spool/samba ] && mkdir -m 1777 /var/spool/samba ||:
+        [ -f /etc/inetd.conf ] && chmod 644 /etc/services /etc/inetd.conf ||:
+fi
+
+%files server
+%defattr(-,root,root)
+#%attr(-,root,root) /sbin/*
+%{_sbindir}/%{name}
+%{_sbindir}/smbd%{samba_major}
+%{_sbindir}/nmbd%{samba_major}
+#%{_sbindir}/smbcontrol
+#%{_sbindir}/mkntpwd
+#%{prefix}/bin/addtosmbpass
+%{_bindir}/mksmbpasswd.sh
+%{_bindir}/smbstatus%{samba_major}
+%{_bindir}/convert_smbpasswd%{samba_major}
+%{_bindir}/pdbedit%{samba_major}
+%{_bindir}/smbgroupedit%{samba_major}
+#%attr(755,root,root) /lib/security/pam_smbpass*
+#/usr/share/swat
+%attr(-,root,root) %config(noreplace) /etc/%{name}/smbusers
+%attr(-,root,root) %config /etc/rc.d/init.d/smb%{samba_major}
+%attr(-,root,root) %config(noreplace) /etc/logrotate.d/%{name}
+%attr(-,root,root) %config(noreplace) /etc/pam.d/%{name}
+#%attr(-,root,root) %config(noreplace) /etc/%{name}/samba-slapd.include
+%{_mandir}/man1/smbstatus*.1*
+%{_mandir}/man5/smbpasswd*.5*
+%{_mandir}/man7/samba*.7*
+%{_mandir}/man8/smbd*.8*
+%{_mandir}/man8/nmbd*.8*
+%{_mandir}/man1/smbcontrol*.1*
+%{_mandir}/man5/lmhosts*.5*
+%{_mandir}/man5/smb.conf*.5*
+%attr(775,root,root) %dir /var/lib/%{name}/netlogon
+%attr(775,root,root) %dir /var/lib/%{name}/profiles
+%attr(775,root,root) %dir /var/lib/%{name}/printers/*
+%dir /var/cache/%{name}
+%dir /var/log/%{name}
+%attr(1777,root,root) %dir /var/spool/%{name}
+%dir %{_datadir}/%{name}/scripts
+#%attr(0755,root,root) %{_datadir}/%{name}/scripts/print-pdf
+#%attr(0750,root,root) %{_datadir}/%{name}/scripts/smbldap*.pl
+#%attr(0640,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smbldap_conf.pm
+#%attr(0644,root,root) %{_datadir}/%{name}/scripts/smbldap_tools.pm
+#%{perl_vendorlib}/*.pm
+%attr(0700,root,root) %{_datadir}/%{name}/scripts/*port_smbpasswd.pl
+
+
+%files doc
+%defattr(-,root,root)
 %doc README COPYING Manifest Read-Manifest-Now
 %doc WHATSNEW.txt Roadmap
+%doc README.%{name}-mandrake-rpm
 %doc docs
-%doc swat/README
 %doc examples
-%attr(-,root,root) %{prefix}/sbin/*
-%attr(-,root,root) /sbin/*
-%attr(-,root,root) %{prefix}/bin/*
-%attr(755,root,root) /lib/*
-%attr(-,root,root) %{prefix}/share/swat/help/*
-%attr(-,root,root) %{prefix}/share/swat/images/*
-%attr(-,root,root) %{prefix}/share/swat/include/*
-%attr(-,root,root) %{prefix}/share/swat/using_samba/*
-%attr(-,root,root) %config(noreplace) /etc/samba/lmhosts
-%attr(-,root,root) %config(noreplace) /etc/samba/smb.conf
-%attr(-,root,root) %config(noreplace) /etc/samba/smbusers
-%attr(-,root,root) /etc/rc.d/init.d/smb
-%attr(-,root,root) /etc/logrotate.d/samba
-%attr(-,root,root) %config(noreplace) /etc/pam.d/samba
-%attr(-,root,root) %{prefix}/share/man/man1/*
-%attr(-,root,root) %{prefix}/share/man/man5/*
-%attr(-,root,root) %{prefix}/share/man/man7/*
-%attr(-,root,root) %{prefix}/share/man/man8/*
-%attr(-,root,root) %dir /etc/samba/
-%attr(-,root,root) %dir /usr/share/samba/codepages/*
-%attr(-,root,root) %dir /usr/share/samba/codepages/src/*
-%attr(-,root,root) %dir /var/lock/samba
-%attr(-,root,root) %dir /var/log/samba
-%attr(1777,root,root) %dir /var/spool/samba
+%doc swat/README
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/*
+
+%files swat
+%defattr(-,root,root)
+%config(noreplace) /etc/xinetd.d/swat%{samba_major}
+#%attr(-,root,root) /sbin/*
+%{_sbindir}/swat%{samba_major}
+%{_menudir}/%{name}
+%{_miconsdir}/*.xpm
+%{_liconsdir}/*.xpm
+%{_iconsdir}/*.xpm
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/help/*
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/images/*
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/include/*
+%{_mandir}/man8/swat*.8*
+
+%files client
+%defattr(-,root,root)
+%ifnarch alpha
+/sbin/mount.smb%{samba_major}
+/sbin/mount.smbfs%{samba_major}
+%attr(755,root,root) %{_bindir}/smbmount%{samba_major}
+%attr(4755,root,root) %{_bindir}/smbumount%{samba_major}
+#%attr(4755,root,root) %{_sbindir}/smbmnt
+%{_mandir}/man8/smbmnt*.8*
+%{_mandir}/man8/smbmount*.8*
+%{_mandir}/man8/smbumount*.8*
+%endif
+%{_bindir}/nmblookup%{samba_major}
+%{_bindir}/findsmb%{samba_major}
+%{_bindir}/smbclient%{samba_major}
+%{_bindir}/smbprint%{samba_major}
+%{_bindir}/smbtar%{samba_major}
+%{_bindir}/smbspool%{samba_major}
+# Link of smbspool to CUPS
+/%{_libdir}/cups/backend/smb%{samba_major}
+/%{_mandir}/man1/nmblookup*.1*
+/%{_mandir}/man1/findsmb*.1*
+/%{_mandir}/man1/smbclient*.1*
+/%{_mandir}/man1/smbtar*.1*
+
+%files common
+%defattr(-,root,root)
+%dir /var/cache/%{name}
+%dir /var/log/%{name}
+%dir /var/run/%{name}
+#%{_bindir}/make_smbcodepage
+#%{_bindir}/make_unicodemap
+%{_bindir}/testparm%{samba_major}
+%{_bindir}/testprns%{samba_major}
+#%{_bindir}/make_printerdef
+%{_bindir}/rpcclient%{samba_major}
+%{_bindir}/smbsh%{samba_major}
+%{_bindir}/smbpasswd%{samba_major}
+%{_bindir}/net%{samba_major}
+%{_bindir}/smbtree%{samba_major}
+%{_libdir}/smbwrapper%{samba_major}.so
+%attr(-,root,root) %config(noreplace) /etc/%{name}/smb.conf
+%attr(-,root,root) %config(noreplace) /etc/%{name}/smb-winbind.conf
+%attr(-,root,root) %config(noreplace) /etc/%{name}/lmhosts
+%attr(-,root,root) /var/lib/%{name}/codepages
+%{_mandir}/man1/make_smbcodepage*.1*
+%{_mandir}/man1/make_unicodemap*.1*
+%{_mandir}/man1/testparm*.1*
+%{_mandir}/man1/smbsh*.1*
+%{_mandir}/man1/testprns*.1*
+%{_mandir}/man5/smb.conf*.5*
+%{_mandir}/man5/lmhosts*.5*
+%{_mandir}/man8/smbpasswd*.8*
+/%{_mandir}/man1/smbcacls*.1*
+
+%if %build_winbind
+%files winbind
+%defattr(-,root,root)
+%{_sbindir}/winbindd%{samba_major}
+%{_bindir}/wbinfo%{samba_major}
+%attr(755,root,root) /lib/security/pam_winbind*
+%attr(755,root,root) /lib/libnss_winbind%{samba_major}*
+%attr(-,root,root) %config /etc/rc.d/init.d/winbind%{samba_major}
+%attr(-,root,root) %config(noreplace) /etc/pam.d/system-auth-winbind*
+%{_mandir}/man8/winbindd*.8*
+%{_mandir}/man1/wbinfo*.1*
+%endif
+
+%if %build_wins
+%files -n nss_wins%{samba_major}
+%defattr(-,root,root)
+%attr(755,root,root) /lib/libnss_wins%{samba_major}.so*
+%endif
+
+#Files for antivirus support:
+%if %build_fprot
+%files vscan-fprot
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-fprotd.so
+%doc examples.bin/VFS/fprot/INSTALL
+%endif
+
+%if %build_kaspersky
+%files vscan-kaspersky
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-kavp.so
+%doc examples.bin/VFS/kaspersky/INSTALL
+%endif
+
+%if %build_mks
+%files vscan-mks
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-mksd.so
+%doc examples.bin/VFS/mks/INSTALL
+%endif
+
+%if %build_openantivirus
+%files vscan-openantivirus
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-oav.so
+%doc examples.bin/VFS/openantivirus/INSTALL
+%endif
+
+%if %build_sophos
+%files vscan-sophos
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-sophos.so
+%doc examples.bin/VFS/sophos/INSTALL
+%endif
+
+%if %build_symantec
+%files vscan-symantec
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-symantec.so
+%doc examples.bin/VFS/symantec/INSTALL
+%endif
+
+%if %build_trend
+%files vscan-trend
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-trend.so
+%doc examples.bin/VFS/trend/INSTALL
+%endif
+
+%changelog
+* Mon Oct 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.3mdk
+- Fix mount.smbfs3 pointing to smbmount not in package
+- Remove unnecessary lines from install (now done by make)
+- Build with ldap and ads on all releases by default
+- Put av-stuff back
+
+* Mon Oct 21 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.2mdk
+- When not building as system samba, avoid conflicting with system samba
+- Macro-ize as much as possible for above (aka finish cleanups)
+- Fix paths in init scripts and logrotate and xinetd
+- Fix provides and obsoletes so as to provide samba, but not obsolete
+  current stable until we have a stable release (when it's the system samba).
+- Add warnings to descriptions when not system samba.
+- This is now parallel installable with the normal samba release, for easy
+  testing. It shouldn't touch existing installations. Of course, only
+  one samba at a time on the same interface!
+
+* Sat Sep 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.1mdk
+- Merge with 2.2.6pre2.2mdk
+- Detect alpha- and beta-, along with pre-releases
+
+* Tue Feb 05 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.1mdk
+- Sync with 2.2.3-2mdk (new --without options, detect when 
+  building for a different distribution.
+
+* Mon Feb 04 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.0mdk
+- Sync with 2.2.2-10mdk, which added build-time options --with ldap,
+  winbind, acl, wins, mdk72, mdk80, mdk81, mdk82, cooker. Added
+  warning in description if built with these options.
+
+* Wed Jan 23 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.2mdk
+- Added %%if's for build_ads, which hopefully will add Active Directory
+  Support (by request).
+
+* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.1mdk
+- More syncing with 2.2 rpm (post and postun scripts)
+- Testing without ldap
+
+* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.0mdk
+- 3.0-alpha13
+- Fixed installman.sh patch.
+
+* Wed Jan 09 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.1mdk
+- Fixed %post and %preun for nss_wins, added %post and %preun for
+  samba-winbind (chkconfig and winbind entries in nsswitch.conf)
+
+* Sun Dec 23 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.0mdk
+- 3.0-alpha12
+- Sync up with changes made in 2.2.2 to support Mandrake 8.0, 7.2
+- Added new subpackage for swat
+- More %if's for ldap.
+
+* Thu Dec 20 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha11-0.0mdk
+- 3.0-alpha11
+
+* Wed Dec 19 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha10-0.0mdk
+- 3.0-alpha10
+
+* Tue Dec 18 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha9-0.0mdk
+- 3.0-alpha9
+
+* Mon Dec 17 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.1mdk
+- Added net command to %files common, pdbedit and smbgroupedit to
+  %files, s/%{prefix}\/bin/%{_bindir}/ (the big cleanup).
+  Added patch to smb.init from 2.2.2 (got missed with 3.0-alpha1 patches)
+
+* Sun Dec 16 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.0mdk
+- Patch for installman.sh to handle lang=en correctly (p24)
+- added --with-manpages-langs=en,ja,pl (translated manpages), but there
+  aren't any manpages for these languages yet ... so we still
+  need %dir and %doc entries for them ...
+- patch (p25) to configure.in to support more than 2 languages.
+- addtosmbpass seems to have returned for now, but make_* have disappeared!
+
+* Fri Dec 14 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha6-0.0mdk
+- DESTDIR patch for Makefile.in (p23), remove a lot of %install scripts
+  this forces move of smbcontrol and smbmnt to %{prefix}/bin
+  removed --with-pam_smbpass as it doesn't compile.
+
+* Thu Dec 06 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-0.0alpha1mdk
+- Samba 3.0alpha1 released (we missed Samba 3.0alpha0!)
+- Redid smbmount-sbin patch and smb.conf patch (20), removed xfs quota patch 
+  (applied upstream), removed ook-patch (codepage directory totally different).
+- Added winbind.init (21) and system-auth-winbind.pamd (22). Patches 20-23 
+  should be applied upstream before 3.0 ships ...
+
+* Wed Dec 05 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-6mdk
+- fixed typo in system-auth-winbind.pamd (--Thanks J. Gluck).
+- fixed %post xxx problem (smb not started in chkconfig --Thanks Viet & B. Kenworthy).
+
+* Fri Nov 23 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-5mdk
+- Had to remove the network recycle bin patch: it seems to mess up 
+  file deletion from windows (files appear to be "already in use")
+
+* Tue Nov 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-4mdk
+- added network recycle bin patch:
+  <http://www.amherst.edu/~bbstone/howto/samba.html>
+- added "recycle bin = .recycled" parameter in smb.conf [homes].
+- fixed winbind/nss_wins perms (oh no I don't own that stuff ;o)
+
+* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-3mdk
+- added %build 8.0 and 7.2, for tweakers to play around.
+- changed configure options:
+  . removed --with-mmap, --with-netatalk (obsolete).
+  . added --with-msdfs, --with-vfs (seems stable, but still need testing).
+
+* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-2mdk
+- rebuilt with winbind and nss_wins enabled.
+
+* Wed Oct 31 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-1mdk
+- Rebuilt on cooker.
+
+* Wed Oct 31 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.992mdk
+- Patch for smb.conf to fix incorrect lpq command, typo in winbind,
+  and add sample linpopup command. Added print driver directories.
+- New XFS quota patch (untested!, samba runs, but do quotas work? We
+  can't check yet since the kernel doesn't seem to support XFS quotas!)
+
+* Fri Oct 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-0.99mdk
+- New samba.spec, almost ready for winbind operations. OLA for Buchan Milne
+  Who did a tremendous integration work on 2.2.2.
+  Rebuild on cooker, please test XFS (ACLs and quotas) again...
+  
+* Mon Oct 15 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.9mdk
+- Samba-2.2.2. released! Use %defines to determine which subpackages
+  are built and which Mandrake release we are buiding on/for (hint: define 
+  build_mdk81 1 for Mandrake 8.1 updates)
+
+* Sun Oct 14 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011014mdk
+- %post and %postun for nss_wins
+
+* Wed Oct 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011010mdk
+- New CVS snapshot, /etc/pam.d/system-auth-winbind added
+  with configuration to allow easy winbind setup.
+  
+* Sun Oct 7 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011007mdk
+- Added new package nss_wins and moved smbpasswd to common (required by
+  winbind).
+
+* Sat Oct 6 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011006mdk
+- Added new package winbind.
+
+* Mon Oct 1 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011001mdk
+- Removed patch to smb init.d file (applied in cvs)
+
+* Sun Sep 30 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010930mdk
+- Added winbind init script, which still needs to check for running nmbd.
+
+* Thu Sep 27 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010927mdk
+- Built from samba-2.2.2-pre cvs, added winbindd, wbinfo, nss_winbind and 
+  pam_winbind, moved pam_smbpass from samba-common to samba. We still
+  need a start-up script for winbind, or need to modify existing one.
+  
+* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-15mdk
+- Enabled acl support (XFS acls now supported by kernel-2.4.8-21mdk thx Chmou)
+  Added smbd patch to support XFS quota (Nathan Scott)
+  
+* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-14mdk
+- Oops! smbpasswd created in wrong directory...
+
+* Tue Sep 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-13mdk
+- Removed a wrong comment in smb.conf.
+  Added creation of smbpasswd during install.
+
+* Mon Aug 27 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-12mdk
+- really less verbose %%post
+
+* Sat Aug 25 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1a-11mdk
+- Fix shared libs in /usr/bin silliness.
+
+* Thu Aug 23 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-10mdk
+- less verbose %%post
+
+* Wed Aug 22 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-9mdk
+- Added smbcacls (missing in %files), modification to smb.conf: ([printers]
+  is still needed, even with point-and-print!, user add script should
+  use name and not gid, since we may not get the gid . New script for
+  putting manpages in place (still need to be added in %files!). Moved
+  smbcontrol to sbin and added it and its man page to %files.
+
+* Wed Aug 22 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-8mdk
+- cleanup /var/lib/samba/codepage/src
+
+* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-7mdk
+- moved codepage generation to %install and codepage dir to /var/lib/samba
+
+* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-6mdk
+- /lib/* was in both samba and samba-common
+  Introducing samba-doc: "alas, for the sake of thy modem, shalt thou remember
+  when Samba was under the Megabyte..."
+
+* Fri Aug 03 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-5mdk
+- Added "the gc touch" to smbinit through the use of killall -0 instead of
+  grep cupsd | grep -v grep (too many greps :o)
+
+* Wed Jul 18 2001 Stefan van der Eijk <stefan@eijk.nu> 2.2.1a-4mdk
+- BuildRequires: libcups-devel
+- Removed BuildRequires: openssl-devel
+
+* Fri Jul 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-3mdk
+- replace chkconfig --add/del with --level 35 on/reset.
+
+* Fri Jul 13 2001 Geoffrey Lee <snailtalk@mandrakesoft.cm> 2.2.1a-2mdk
+- Replace discription s/inetd/xinetd/, we all love xinetd, blah.
+
+* Thu Jul 12 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-1mdk
+- Bugfix release. Fixed add user script, added print$ share and printer admin
+  We need to test interaction of new print support with CUPS, but printer
+  driver uploads should work.
+
+* Wed Jul 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-17mdk
+- fixed smb.conf a bit, rebuilt on cooker.
+
+* Tue Jul 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-16mdk
+- Finally, samba 2.2.1 has actually been release. At least we were ready!
+  Cleaned up smb.conf, and added some useful entries for domain controlling.
+  Migrated changes made in samba's samba2.spec for 2.2.1  to this file.
+  Added groupadd command in post to create a group for samba machine accounts.
+  (We should still check the postun, samba removes pam, logs and cache)
+
+* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-15mdk
+- fixed smbwrapper compile options.
+
+* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-14mdk
+- added LFS support.
+  added smbwrapper support (smbsh)
+
+* Wed Jun 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-13mdk
+- /sbin/mount.smb and /sbin/mount.smbfs now point to the correct location
+  of smbmount (/usr/bin/smbmount)
+
+* Tue Jun 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-12mdk
+- smbmount and smbumount are now in /usr/bin and SUID.
+  added ||: to triggerpostun son you don't get error 1 anymore when rpm -e
+  Checked the .bz2 sources with file *: everything is OK now (I'm so stupid ;o)!
+
+* Tue Jun 19 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1-11mdk
+- s/Copyright/License/;
+- Stop Sylvester from pretending .gz source to be .bz2 source via filename
+  aka really bzip2 the source.
+
+* Mon Jun 18 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-10mdk
+- changed Till's startup script modifications: now samba is being reloaded
+  automatically 1 minute after it has started (same reasons as below in 9mdk)
+  added _post_ and _preun_ for service smb
+  fixed creation of /var/lib/samba/{netlogon,profiles} (%dir was missing)
+
+* Thu Jun 14 2001 Till Kamppeter <till@mandrakesoft.com> 2.2.1-9mdk
+- Modified the Samba startup script so that in case of CUPS being used as
+  printing system Samba only starts when the CUPS daemon is ready to accept
+  requests. Otherwise the CUPS queues would not appear as Samba shares.
+
+* Mon Jun 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-8mdk
+- patched smbmount.c to have it call smbmnt in sbin (thanks Seb).
+
+* Wed May 30 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-7mdk
+- put SWAT menu icons back in place.
+
+* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-6mdk
+- OOPS! fixed smbmount symlinks
+
+* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-5mdk
+- removed inetd postun script, replaced with xinetd.
+  updated binary list (smbcacls...)
+  cleaned samba.spec
+
+* Mon May 28 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-4mdk
+- Changed configure options to point to correct log and codepage directories,
+  added crude script to fix logrotate file for new log file names, updated
+  patches to work with current CVS.
+
+* Thu May 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-3mdk
+- Cleaned and updated the %files section.
+
+* Sat May 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-2mdk
+- Moved all samba files from /etc to /etc/samba (Thanks DomS!).
+  Fixed fixinit patch (/etc/samba/smb.conf)
+
+* Fri May 18 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-1mdk
+- Now use packaging/Mandrake/smb.conf, removed unused and obsolete
+  patches, moved netlogon and profile shares to /var/lib/samba in the
+  smb.conf to match the spec file. Added configuration for ntlogon to
+  smb.conf. Removed pam-foo, fixinit and makefilepath patches. Removed
+  symlink I introduced in 2.2.0-1mdk
+
+* Thu May 3 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-5mdk
+- Added more configure options. Changed Description field (thx John T).
+
+* Wed Apr 25 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-4mdk
+- moved netlogon and profiles to /var/lib/samba by popular demand ;o)
+
+* Tue Apr 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-3mdk
+- moved netlogon and profiles back to /home.
+
+* Fri Apr 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-2mdk
+- fixed post inetd/xinetd script&
+
+* Thu Apr 19 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.0-1mdk
+- Upgrade to 2.2.0. Merged most of 2.0.7-25mdk's patches (beware
+  nasty "ln -sf samba-%{ver} ../samba-2.0.7" hack to force some patches
+  to take. smbadduser and addtosmbpass seem to have disappeared. Moved
+  all Mandrake-specific files to packaging/Mandrake and made patches
+  from those shipped with samba. Moved netlogon to /home/samba and added
+  /home/samba/profiles. Added winbind,smbfilter and debug2html to make command.
+
+* Thu Apr 12 2001 Frederic Crozat <fcrozat@mandrakesoft.com> 2.0.7-25mdk
+- Fix menu entry and provide separate menu entry for GNOME
+  (nautilus doesn't support HTTP authentication yet)
+- Add icons in package
+
+* Fri Mar 30 2001 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-24mdk
+- use new server macros
+
+* Wed Mar 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-23mdk
+- check whether /etc/inetd.conf exists (upgrade) or not (fresh install).
+
+* Thu Mar 15 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-22mdk
+- spec cosmetics, added '-r' option to lpr-cups command line so files are
+  removed from /var/spool/samba after printing.
+
+* Tue Mar 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-21mdk
+- merged last rh patches.
+
+* Thu Nov 23 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-20mdk
+- removed dependencies on cups and cups-devel so one can install samba without using cups
+- added /home/netlogon
+
+* Mon Nov 20 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-19mdk
+- Changed default print command in /etc/smb.conf, so that the Windows
+  driver of the printer has to be used on the client.
+- Fixed bug in smbspool which prevented from printing from a
+  Linux-Samba-CUPS client to a Windows server through the guest account.
+
+* Mon Oct 16 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-18mdk
+- Moved "smbspool" (Samba client of CUPS) to the samba-client package
+
+* Sat Oct 7 2000 Stefan van der Eijk <s.vandereijk@chello.nl> 2.0.7-17mdk
+- Added RedHat's "quota" patch to samba-glibc21.patch.bz2, this fixes
+  quota related compile problems on the alpha.
+
+* Wed Oct 4 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-16mdk
+- Fixed 'guest ok = ok' flag in smb.conf
+
+* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-15mdk
+- Allowed guest account to print in smb.conf
+- added swat icon in menu
+
+* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-14mdk
+- Removed rh ssl patch and --with-ssl flag: not appropriate for 7.2
+
+* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-13mdk
+- Changed fixinit patch.
+- Changed smb.conf for better CUPS configuration.
+- Thanks Fred for doing this ---vvv.
+
+* Tue Oct  3 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-12mdk
+- menu entry for web configuration tool.
+- merge with rh: xinetd + ssl + pam_stack.
+- Added smbadduser rh-bugfix w/o relocation of config-files.
+
+* Mon Oct  2 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-11mdk
+- added build requires on cups-devel and pam-devel.
+
+* Mon Oct  2 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-10mdk
+- Fixed smb.conf entry for CUPS: "printcap name = lpstat", "lpstats" was
+  wrong.
+
+* Mon Sep 25 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-9mdk
+- Cosmetic changes to make rpmlint more happy
+
+* Wed Sep 11 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-8mdk
+- added linkage to the using_samba book in swat
+
+* Fri Sep 01 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-7mdk
+- Added CUPS support to smb.conf
+- Added internationalization options to smb.conf [Global]
+
+* Wed Aug 30 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-6mdk
+- Put "smbspool" to the files to install
+
+* Wed Aug 30 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-5mdk
+- Did some cleaning in the patches
+
+* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-4mdk
+- relocated man pages from /usr/man to /usr/share/man for compatibility reasons
+
+* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-3mdk
+- added make_unicodemap and build of unicode_map.$i in the spec file
+
+* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-2mdk
+- renamed /etc/codepage/codepage.$i into /etc/codepage/unicode_map.$i to fix smbmount bug.
+
+* Fri Jul 07 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-1mdk
+- 2.0.7
+
+* Wed Apr 05 2000 Francis Galiegue <fg@mandrakesoft.com> 2.0.6-4mdk
+
+- Titi sucks, does not put versions in changelog
+- Fixed groups for -common and -client
+- /usr/sbin/samba is no config file
+
+* Thu Mar 23 2000 Thierry Vignaud <tvignaud@mandrakesoft.com>
+- fix buggy post install script (pixel)
+
+* Fri Mar 17 2000 Francis Galiegue <francis@mandrakesoft.com> 2.0.6-2mdk
+
+- Changed group according to 7.1 specs
+- Some spec file changes
+- Let spec-helper do its job
+
+* Thu Nov 25 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- 2.0.6.
+
+* Tue Nov  2 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- Merge with rh changes.
+- Split in 3 packages.
+
+* Fri Aug 13 1999 Pablo Saratxaga <pablo@@mandrakesoft.com>
+- corrected a bug with %post (the $1 parameter is "1" in case of
+  a first install, not "0". That parameter is the number of packages
+  of the same name that will exist after running all the steps if nothing
+  is removed; so it is "1" after first isntall, "2" for a second install
+  or an upgrade, and "0" for a removal)
+
+* Wed Jul 28 1999 Pablo Saratxaga <pablo@@mandrakesoft.com>
+- made smbmnt and smbumount suid root, and only executable by group 'smb'
+  add to 'smb' group any user that should be allowed to mount/unmount
+  SMB shared directories
+
+* Fri Jul 23 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- 2.0.5a (bug security fix).
+
+* Wed Jul 21 1999 Axalon Bloodstone <axalon@linux-mandrake.com>
+- 2.0.5
+- cs/da/de/fi/fr/it/tr descriptions/summaries
+
+* Sun Jun 13 1999 Bernhard Rosenkränzer <bero@mandrakesoft.com>
+- 2.0.4b
+- recompile on a system that works ;)
+
+* Wed Apr 21 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- Mandrake adaptations.
+- Bzip2 man-pages.
+
+* Fri Mar 26 1999 Bill Nottingham <notting@redhat.com>
+- add a mount.smb to make smb mounting a little easier.
+- smb filesystems apparently do not work on alpha. Oops.
+
+* Thu Mar 25 1999 Bill Nottingham <notting@redhat.com>
+- always create codepages
+
+* Tue Mar 23 1999 Bill Nottingham <notting@redhat.com>
+- logrotate changes
+
+* Sun Mar 21 1999 Cristian Gafton <gafton@redhat.com>
+- auto rebuild in the new build environment (release 3)
+
+* Fri Mar 19 1999 Preston Brown <pbrown@redhat.com>
+- updated init script to use graceful restart (not stop/start)
+
+* Tue Mar  9 1999 Bill Nottingham <notting@redhat.com>
+- update to 2.0.3
+
+* Thu Feb 18 1999 Bill Nottingham <notting@redhat.com>
+- update to 2.0.2
+
+* Mon Feb 15 1999 Bill Nottingham <notting@redhat.com>
+- swat swat
+
+* Tue Feb  9 1999 Bill Nottingham <notting@redhat.com>
+- fix bash2 breakage in post script
+
+* Fri Feb  5 1999 Bill Nottingham <notting@redhat.com>
+- update to 2.0.0
+
+* Mon Oct 12 1998 Cristian Gafton <gafton@redhat.com>
+- make sure all binaries are stripped
+
+* Thu Sep 17 1998 Jeff Johnson <jbj@redhat.com>
+- update to 1.9.18p10.
+- fix %triggerpostun.
+
+* Tue Jul 07 1998 Erik Troan <ewt@redhat.com>
+- updated postun triggerscript to check $0
+- clear /etc/codepages from %preun instead of %postun
+
+* Mon Jun 08 1998 Erik Troan <ewt@redhat.com>
+- made the %postun script a tad less agressive; no reason to remove
+  the logs or lock file (after all, if the lock file is still there,
+  samba is still running)
+- the %postun and %preun should only exectute if this is the final
+  removal
+- migrated %triggerpostun from Red Hat's samba package to work around
+  packaging problems in some Red Hat samba releases
 
+* Sun Apr 26 1998 John H Terpstra <jht@samba.anu.edu.au>
+- minor tidy up in preparation for release of 1.9.18p5
+- added findsmb utility from SGI package
 
+* Wed Mar 18 1998 John H Terpstra <jht@samba.anu.edu.au>
+- Updated version and codepage info.
+- Release to test name resolve order
 
+* Sat Jan 24 1998 John H Terpstra <jht@samba.anu.edu.au>
+- Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com>
+- Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb
+- Compounded make line
+- Updated smb.init restart mechanism
+- Use compound mkdir -p line instead of individual calls to mkdir
+- Fixed smb.conf file path for log files
+- Fixed smb.conf file path for incoming smb print spool directory
+- Added a number of options to smb.conf file
+- Added smbadduser command (missed from all previous RPMs) - Doooh!
+- Added smbuser file and smb.conf file updates for username map
diff --git a/packaging/Mandrake/smb.conf b/packaging/Mandrake/smb.conf
index a14e90ec16b..f68d48cb4b3 100644
--- a/packaging/Mandrake/smb.conf
+++ b/packaging/Mandrake/smb.conf
@@ -1,3 +1,4 @@
+
 # This is the main Samba configuration file. You should read the
 # smb.conf(5) manual page in order to understand the options listed
 # here. Samba has a huge number of configurable options (perhaps too
@@ -14,32 +15,22 @@
 #======================= Global Settings =====================================
 [global]
 
+# 1. Server Naming Options:
 # workgroup = NT-Domain-Name or Workgroup-Name
    workgroup = MDKGROUP
 
+# netbios name is the name you will see in "Network Neighbourhood",
+# but defaults to your hostname
+;  netbios name = <name_of_this_server>
+
 # server string is the equivalent of the NT Description field
    server string = Samba Server %v
 
-# This option is important for security. It allows you to restrict
-# connections to machines which are on your local network. The
-# following example restricts access to two C class networks and
-# the "loopback" interface. For more examples of the syntax see
-# the smb.conf man page
-;   hosts allow = 192.168.1. 192.168.2. 127.
-
-# Enabling internationalization:
-# you can match a Windows code page with a UNIX character set.
-# Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European),
-# 852 (Eastern Eu.), 861 (Icelandic), 932 (Cyrillic - Russian),
-# 936 (Japanese - Shift-JIS), 936 (Simpl. Chinese), 949 (Korean Hangul),
-# 950 (Trad. Chin.).
-# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.),
-# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.)
-# This is an example for french users:
-;   client code page = 850
-;   character set = ISO8859-1
-
+# Message command is run by samba when a "popup" message is sent to it.
+# The example below is for use with LinPopUp:
+; message command = /usr/bin/linpopup "%f" "%m" %s; rm %s
 
+# 2. Printing Options:
 # CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK
 # (as cups is now used in linux-mandrake 7.2 by default)
 # if you want to automatically load your printer list rather
@@ -52,11 +43,18 @@
 # bsd, sysv, plp, lprng, aix, hpux, qnx, cups
    printing = cups
 
-
-# Uncomment this if you want a guest account, you must add this to /etc/passwd
-# otherwise the user "nobody" is used
-;  guest account = pcguest
-
+# Samba 2.2 supports the Windows NT-style point-and-print feature. To
+# use this, you need to be able to upload print drivers to the samba
+# server. The printer admins (or root) may install drivers onto samba.
+# Note that this feature uses the print$ share, so you will need to 
+# enable it below.
+# This parameter works like domain admin group:
+# printer admin = @<group> <user>
+;   printer admin = @adm
+# This should work well for winbind:
+;   printer admin = @"Domain Admins"
+
+# 3. Logging Options:
 # this tells Samba to use a separate log file for each machine
 # that connects
    log file = /var/log/samba/log.%m
@@ -64,11 +62,29 @@
 # Put a capping on the size of the log files (in Kb).
    max log size = 50
 
+# Set the log (verbosity) level (0 <= log level <= 10)
+; log level = 3
+
+# 4. Security and Domain Membership Options:
+# This option is important for security. It allows you to restrict
+# connections to machines which are on your local network. The
+# following example restricts access to two C class networks and
+# the "loopback" interface. For more examples of the syntax see
+# the smb.conf man page. Do not enable this if (tcp/ip) name resolution does
+# not work for all the hosts in your network.
+;   hosts allow = 192.168.1. 192.168.2. 127.
+
+# Uncomment this if you want a guest account, you must add this to /etc/passwd
+# otherwise the user "nobody" is used
+;  guest account = pcguest
+
 # Security mode. Most people will want user level security. See
 # security_level.txt for details.
    security = user
-# Use password server option only with security = server
+# Use password server option only with security = server or security = domain
+# When using security = domain, you should use password server = *
 ;   password server = <NT-Server-Name>
+;   password server = *
 
 # Password Level allows matching of _n_ characters of the password for
 # all combinations of upper and lower case.
@@ -78,27 +94,69 @@
 # You may wish to use password encryption. Please read
 # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
 # Do not enable this option unless you have read those documents
-;  encrypt passwords = yes
-;  smb passwd file = /etc/samba/private/smbpasswd
+# Encrypted passwords are required for any use of samba in a Windows NT domain
+# The smbpasswd file is only required by a server doing authentication, thus
+# members of a domain do not need one.
+  encrypt passwords = yes
+  smb passwd file = /etc/samba/smbpasswd
 
 # The following are needed to allow password changing from Windows to
-# update the Linux sytsem password also.
+# also update the Linux system password.
 # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
 # NOTE2: You do NOT need these to allow workstations to change only
 #        the encrypted SMB passwords. They allow the Unix password
 #        to be kept in sync with the SMB password.
 ;  unix password sync = Yes
+# You either need to setup a passwd program and passwd chat, or
+# enable pam password change
+;  pam password change = yes
 ;  passwd program = /usr/bin/passwd %u
-;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
+;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n
+;*passwd:*all*authentication*tokens*updated*successfully*
 
 # Unix users can map to different SMB User names
-;  username map = /etc/smbusers
+;  username map = /etc/samba/smbusers
 
 # Using the following line enables you to customise your configuration
 # on a per machine basis. The %m gets replaced with the netbios name
 # of the machine that is connecting
-;   include = /etc/smb.conf.%m
+;   include = /etc/samba/smb.conf.%m
+
+# Options for using winbind. Winbind allows you to do all account and
+# authentication from a Windows or samba domain controller, creating
+# accounts on the fly, and maintaining a mapping of Windows RIDs to unix uid's 
+# and gid's. winbind uid and winbind gid are the only required parameters.
+#
+# winbind uid is the range of uid's winbind can use when mapping RIDs to uid's
+;  winbind uid = 10000-20000
+#
+# winbind gid is the range of uid's winbind can use when mapping RIDs to gid's
+;  winbind gid = 10000-20000
+#
+# winbind separator is the character a user must use between their domain
+# name and username, defaults to "\"
+;  winbind separator = +
+#
+# winbind use default domain allows you to have winbind return usernames
+# in the form user instead of DOMAIN+user for the domain listed in the
+# workgroup parameter.
+;  winbind use default domain = yes
+#
+# template homedir determines the home directory for winbind users, with 
+# %D expanding to their domain name and %U expanding to their username:
+;  template homedir = /home/%D/%U
+
+# When using winbind, you may want to have samba create home directories
+# on the fly for authenticated users. Ensure that /etc/pam.d/samba is
+# using 'service=system-auth-winbind' in pam_stack modules, and then
+# enable obedience of pam restrictions below:
+;  obey pam restrictions = yes
+
+#
+# template shell determines the shell users authenticated by winbind get
+;  template shell = /bin/bash
 
+# 5. Browser Control and Networking Options:
 # Most people will find that this option gives better performance.
 # See speed.txt and the manual pages for details
    socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
@@ -110,12 +168,11 @@
 
 # Configure remote browse list synchronisation here
 #  request announcement to, or browse list sync from:
-#	a specific host or from / to a whole subnet (see below)
+#       a specific host or from / to a whole subnet (see below)
 ;   remote browse sync = 192.168.3.25 192.168.5.255
 # Cause this host to announce itself to local subnets here
 ;   remote announce = 192.168.1.255 192.168.2.44
 
-# Browser Control Options:
 # set local master to no if you don't want Samba to become a master
 # browser on your network. Otherwise the normal election rules apply
 ;   local master = no
@@ -133,8 +190,9 @@
 # and gives it a slightly higher chance of winning the election
 ;   preferred master = yes
 
+# 6. Domain Control Options:
 # Enable this if you want Samba to be a domain logon server for 
-# Windows95 workstations. 
+# Windows95 workstations or Primary Domain Controller for WinNT and Win2k
 ;   domain logons = yes
 
 # if you enable domain logons then you may want a per-machine or
@@ -144,11 +202,51 @@
 # run a specific logon batch file per username
 ;   logon script = %U.bat
 
-# Where to store roving profiles (only for Win95 and WinNT)
+# Where to store roaming profiles for WinNT and Win2k
 #        %L substitutes for this servers netbios name, %U is username
 #        You must uncomment the [Profiles] share below
 ;   logon path = \\%L\Profiles\%U
 
+# Where to store roaming profiles for Win9x. Be careful with this as it also
+# impacts where Win2k finds it's /HOME share
+; logon home = \\%L\%U\.profile
+
+# The add user script is used by a domain member to add local user accounts
+# that have been authenticated by the domain controller, or by the domain
+# controller to add local machine accounts when adding machines to the domain.
+# The script must work from the command line when replacing the macros,
+# or the operation will fail. Check that groups exist if forcing a group.
+# Script for domain controller for adding machines:
+; add user script = /usr/sbin/useradd -d /dev/null -g machines -c 'Machine Account' -s /bin/false -M %u
+# Script for domain controller with LDAP backend for adding machines (please
+# configure in /etc/samba/smbldap_conf.pm first):
+; add user script = /usr/share/samba/scripts/smbldap-useradd.pl -w -d /dev/null -g machines -c 'Machine Account' -s /bin/false %u
+# Script for domain member for adding local accounts for authenticated users:
+; add user script = /usr/sbin/useradd -s /bin/false %u
+
+# Domain groups:
+# domain admin group is a list of unix users or groups who are made members
+# of the Domain Admin group
+; domain admin group = root @wheel
+#
+# domain guest groups is a list of unix users or groups who are made members
+# of the Domain Guests group
+; domain guest group = nobody @guest
+
+# LDAP configuration for Domain Controlling:
+# The account (dn) that samba uses to access the LDAP server
+# This account needs to have write access to the LDAP tree
+# You will need to give samba the password for this dn, by 
+# running 'smbpasswd -w mypassword'
+; ldap admin dn = cn=root,dc=mydomain,dc=com
+; ldap ssl = start_tls
+# start_tls should run on 389, but samba defaults incorrectly to 636
+; ldap port = 389
+; ldap suffix = dc=mydomain,dc=com
+; ldap server = ldap.mydomain.com
+
+
+# 7. Name Resolution Options:
 # All NetBIOS names must be resolved to IP Addresses
 # 'Name Resolve Order' allows the named resolution mechanism to be specified
 # the default order is "host lmhosts wins bcast". "host" means use the unix
@@ -167,12 +265,12 @@
 ;   wins support = yes
 
 # WINS Server - Tells the NMBD components of Samba to be a WINS Client
-#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+#       Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
 ;   wins server = w.x.y.z
 
 # WINS Proxy - Tells Samba to answer name resolution queries on
 # behalf of a non WINS capable client, for this to work there must be
-# at least one	WINS Server on the network. The default is NO.
+# at least one  WINS Server on the network. The default is NO.
 ;   wins proxy = yes
 
 # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
@@ -180,6 +278,7 @@
 # this has been changed in version 1.9.18 to no.
    dns proxy = no 
 
+# 8. File Naming Options:
 # Case Preservation can be handy - system default is _no_
 # NOTE: These can be set on a per share basis
 ;  preserve case = no
@@ -189,11 +288,31 @@
 # Be very careful with case sensitivity - it can break things!
 ;  case sensitive = no
 
+# Enabling internationalization:
+# you can match a Windows code page with a UNIX character set.
+# Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European),
+# 852 (Eastern Eu.), 861 (Icelandic), 932 (Cyrillic - Russian),
+# 936 (Japanese - Shift-JIS), 936 (Simpl. Chinese), 949 (Korean Hangul),
+# 950 (Trad. Chin.).
+# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.),
+# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.)
+# This is an example for french users:
+;   client code page = 850
+;   character set = ISO8859-1
+
+
 #============================ Share Definitions ==============================
 [homes]
    comment = Home Directories
    browseable = no
    writable = yes
+# You can enable VFS recycle bin on a per share basis:
+# Uncomment the next 2 lines (make sure you create a
+# .recycle folder in the base of the share and ensure
+# all users will have write access to it. See
+# examples/VFS/recycle/REAME in samba-doc for details
+;   vfs object = /usr/lib/samba/vfs/recycle.so
+;   vfs options= /etc/samba/recycle.conf
 
 # Un-comment the following and create the netlogon directory for Domain Logons
 ; [netlogon]
@@ -201,11 +320,10 @@
 ;   path = /var/lib/samba/netlogon
 ;   guest ok = yes
 ;   writable = no
-;   share modes = no
 
 #Uncomment the following 2 lines if you would like your login scripts to
 #be created dynamically by ntlogon (check that you have it in the correct
-#locationn (the default of the ntlogon rpm available in contribs)
+#location (the default of the ntlogon rpm available in contribs)
 ;root preexec = /usr/bin/ntlogon -u %U -g %G -o %a -d /var/lib/samba/netlogon
 ;root postexec = rm -f /var/lib/samba/netlogon/%U.bat
 
@@ -236,10 +354,36 @@
 # =====================================
 # print command: see above for details.
 # =====================================
-   print command = lpr-cups -P %p -o raw %s -r	 # using client side printer drivers.
+   print command = lpr-cups -P %p -o raw %s -r   # using client side printer drivers.
 ;   print command = lpr-cups -P %p %s # using cups own drivers (use generic PostScript on clients).
-   lpq command = lpstat -o %p
-   lprm command = cancel %p-%j
+# The following two commands are the samba defaults for printing=cups
+# change them only if you need different options:
+;   lpq command = lpq -P %p
+;   lprm command = cancel %p-%j
+
+# This share is used for Windows NT-style point-and-print support.
+# To be able to install drivers, you need to be either root, or listed
+# in the printer admin parameter above. Note that you also need write access
+# to the directory and share definition to be able to upload the drivers.
+# For more information on this, please see the Printing Support Section of
+# /usr/share/doc/samba-<version>/docs/Samba-HOWTO-Collection.pdf 
+[print$]
+   path = /var/lib/samba/printers
+   browseable = yes
+   read only = yes
+   write list = @adm root
+
+# A useful application of samba is to make a PDF-generation service
+# To streamline this, install windows postscript drivers (preferably colour)
+# on the samba server, so that clients can automatically install them.
+
+[pdf-generator]
+   path = /var/tmp
+   guest ok = No
+   printable = Yes
+   comment = PDF Generator (only valid users)
+   #print command = /usr/share/samba/scripts/print-pdf file path win_path recipient IP &
+   print command = /usr/share/samba/scripts/print-pdf %s ~%u \\\\\\\\%L\\\\%u %m %I &
 
 # This one is useful for people to share files
 ;[tmp]
@@ -256,10 +400,13 @@
 ;   public = yes
 ;   writable = no
 ;   write list = @staff
+# Audited directory through experimental VFS audit.so module:
+# Uncomment next line.
+;   vfs object = /usr/lib/samba/vfs/audit.so
 
 # Other examples. 
 #
-# A private printer, usable only by fred. Spool data will be placed in fred's
+# A private printer, usable only by Fred. Spool data will be placed in Fred's
 # home directory. Note that fred must have write access to the spool directory,
 # wherever it is.
 ;[fredsprn]
@@ -271,7 +418,7 @@
 ;   writable = no
 ;   printable = yes
 
-# A private directory, usable only by fred. Note that fred requires write
+# A private directory, usable only by Fred. Note that Fred requires write
 # access to the directory.
 ;[fredsdir]
 ;   comment = Fred's Service
@@ -317,4 +464,3 @@
 ;   printable = no
 ;   create mask = 0765
 
-
diff --git a/packaging/Mandrake/smb.init b/packaging/Mandrake/smb.init
index 8855f04efba..bdc15187095 100755
--- a/packaging/Mandrake/smb.init
+++ b/packaging/Mandrake/smb.init
@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# chkconfig: - 91 35
+# chkconfig: 35 91 9
 # description: Starts and stops the Samba smbd and nmbd daemons \
 #	       used to provide SMB network services.
 
@@ -26,6 +26,12 @@ RETVAL=0
 
 
 start() {
+       # If CUPS is used as printing system, reload smb after a 1 minute delay
+       # to allow the printers to appear properly as samba shares.
+        if killall -0 cupsd 2>/dev/null; then
+         ( sleep 60 && killproc smbd -HUP ) &
+       fi
+       export TMPDIR="/var/tmp"
 	echo -n "Starting SMB services: "
 	daemon smbd -D 	
 	RETVAL=$?
@@ -55,6 +61,7 @@ restart() {
 	start
 }	
 reload() {
+       export TMPDIR="/var/tmp"
         echo -n "Reloading smb.conf file: "
 	killproc smbd -HUP
 	RETVAL=$?
diff --git a/packaging/Mandrake/smbmount-sbin.patch b/packaging/Mandrake/smbmount-sbin.patch
new file mode 100644
index 00000000000..b6387208134
--- /dev/null
+++ b/packaging/Mandrake/smbmount-sbin.patch
@@ -0,0 +1,15 @@
++++ samba-2.2.1/source/client/smbmount.c	Sun Apr 15 01:03:46 2001
+--- samba-2.2.1/source/client/smbmount.c.seb	Mon Jun 11 14:26:23 2001
+@@ -484,9 +484,9 @@
+ 	}
+ 
+ 	if (sys_fork() == 0) {
+-		if (file_exist(BINDIR "/smbmnt", NULL)) {
+-			execv(BINDIR "/smbmnt", args);
+-			fprintf(stderr,"execv of %s failed. Error was %s.", BINDIR "/smbmnt", strerror(errno));
++		if (file_exist(SBINDIR "/smbmnt", NULL)) {
++			execv(SBINDIR "/smbmnt", args);
++			fprintf(stderr,"execv of %s failed. Error was %s.", SBINDIR "/smbmnt", strerror(errno));
+ 		} else {
+ 			execvp("smbmnt", args);
+ 			fprintf(stderr,"execvp of smbmnt failed. Error was %s.", strerror(errno) );
diff --git a/packaging/Mandrake/smbw.patch b/packaging/Mandrake/smbw.patch
new file mode 100644
index 00000000000..0abbfdf73f6
--- /dev/null
+++ b/packaging/Mandrake/smbw.patch
@@ -0,0 +1,10 @@
+--- samba-2.0.0/source/smbwrapper/smbsh.in.orig	Mon Oct  5 22:37:01 1998
++++ samba-2.0.0/source/smbwrapper/smbsh.in	Mon Oct  5 22:37:51 1998
+@@ -1,6 +1,6 @@
+ #! /bin/sh
+ 
+-SMBW_LIBDIR=${SMBW_LIBDIR-@builddir@/smbwrapper}
++SMBW_LIBDIR=${SMBW_LIBDIR-/usr/bin}
+ 
+ if [ ! -f ${SMBW_LIBDIR}/smbwrapper.so ]; then
+     echo You need to set LIBDIR in smbsh
diff --git a/packaging/Mandrake/system-auth-winbind.pamd b/packaging/Mandrake/system-auth-winbind.pamd
new file mode 100644
index 00000000000..af859af72b2
--- /dev/null
+++ b/packaging/Mandrake/system-auth-winbind.pamd
@@ -0,0 +1,17 @@
+#%PAM-1.0
+
+auth        required      /lib/security/pam_env.so
+auth        sufficient    /lib/security/pam_winbind.so
+auth        sufficient    /lib/security/pam_unix.so likeauth nullok use_first_pass
+auth        required      /lib/security/pam_deny.so
+
+account     sufficient    /lib/security/pam_winbind.so
+account     required      /lib/security/pam_unix.so
+
+password    required      /lib/security/pam_cracklib.so retry=3
+password    sufficient    /lib/security/pam_unix.so nullok use_authtok md5 shadow
+password    required      /lib/security/pam_deny.so
+
+session     required      /lib/security/pam_mkhomedir.so skel=/etc/skel/ umask=0022 
+session     required      /lib/security/pam_limits.so
+session     required      /lib/security/pam_unix.so
diff --git a/packaging/Mandrake/winbind.init b/packaging/Mandrake/winbind.init
new file mode 100644
index 00000000000..b7b452eb0b9
--- /dev/null
+++ b/packaging/Mandrake/winbind.init
@@ -0,0 +1,93 @@
+#!/bin/sh
+#
+# chkconfig: 345 81 45
+# description: Starts and stops the Samba winbind daemon to provide \
+# user and group information from a domain controller to linux.
+
+# Source function library.
+if [ -f /etc/init.d/functions ] ; then
+  . /etc/init.d/functions
+elif [ -f /etc/rc.d/init.d/functions ] ; then
+  . /etc/rc.d/init.d/functions
+else
+  exit 0
+fi
+
+# Source networking configuration.
+. /etc/sysconfig/network
+
+# Check that networking is up.
+[ ${NETWORKING} = "no" ] && exit 0
+
+# Check that smb.conf exists.
+[ -f /etc/samba/smb.conf ] || exit 0
+
+RETVAL=0
+
+
+start() {
+	echo -n "Starting Winbind services: "
+	RETVAL=1
+	if [ "`grep -i 'winbind uid' /etc/samba/smb.conf | egrep -v [\#\;]`" ]; then
+		daemon winbindd
+		RETVAL=$?
+	else
+		echo "Winbind is not configured in /etc/samba/smb.conf, not starting"
+	fi
+	echo
+	[ $RETVAL -eq 0 ] && touch /var/lock/subsys/winbind || \
+	   RETVAL=1
+	return $RETVAL
+}	
+stop() {
+	echo -n "Shutting down Winbind services: "
+	RETVAL=1
+	if [ "`grep -i 'winbind uid' /etc/samba/smb.conf | egrep -v [\#\;]`" ]; then
+		killproc winbindd
+		RETVAL=$?
+	fi
+	echo
+	[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/winbind
+	return $RETVAL
+}	
+restart() {
+	stop
+	start
+}	
+reload() {
+	export TMPDIR="/var/tmp"
+        echo -n "Checking domain trusts: "
+	killproc winbindd -HUP
+	RETVAL=$?
+	echo
+	return $RETVAL
+}	
+mdkstatus() {
+	status winbindd
+}	
+
+case "$1" in
+  start)
+  	start
+	;;
+  stop)
+  	stop
+	;;
+  restart)
+  	restart
+	;;
+  reload)
+  	reload
+	;;
+  status)
+  	mdkstatus
+	;;
+  condrestart)
+  	[ -f /var/lock/subsys/winbindd ] && restart || :
+	;;
+  *)
+	echo "Usage: $0 {start|stop|restart|status|condrestart}"
+	exit 1
+esac
+
+exit $?