Convert README.Win32-Viruses DHCP-Server-Configuration and Faxing to SGML...

2 files changed, 0 insertions, 460 deletions

diff --git a/docs/textdocs/DHCP-Server-Configuration.txt b/docs/textdocs/DHCP-Server-Configuration.txt
deleted file mode 100644
index 499706955fb..00000000000
--- a/docs/textdocs/DHCP-Server-Configuration.txt
+++ /dev/null
@@ -1,240 +0,0 @@
-Subject:	DHCP Server Configuration for SMB Clients
-Date:		March 1, 1998
-Updated:        May 15, 2001
-Contributor:	John H Terpstra <jht@samba.org>
-Support:	This is an unsupported document. Refer to documentation that is
-		supplied with the ISC DHCP Server. Do NOT email the contributor
-		for ANY assistance.
-===============================================================================
-
-Background:
-===========
-
-We wish to help those folks who wish to use the ISC DHCP Server and provide
-sample configuration settings. Most operating systems today come ship with
-the ISC DHCP Server. ISC DHCP is available from:
-		ftp://ftp.isc.org/isc/dhcp
-
-Incorrect configuration of MS Windows clients (Windows9X, Windows ME, Windows
-NT/2000) will lead to problems with browsing and with general network
-operation. Windows 9X/ME users often report problems where the TCP/IP and related
-network settings will inadvertantly become reset at machine start-up resulting
-in loss of configuration settings. This results in increased maintenance
-overheads as well as serious user frustration.
-
-In recent times users on one mailing list incorrectly attributed the cause of
-network operating problems to incorrect configuration of Samba.
-
-One user insisted that the only way to provent Windows95 from periodically
-performing a full system reset and hardware detection process on start-up was
-to install the NetBEUI protocol in addition to TCP/IP. This assertion is not
-correct.
-
-In the first place, there is NO need for NetBEUI. All Microsoft Windows clients
-natively run NetBIOS over TCP/IP, and that is the only protocol that is
-recognised by Samba. Installation of NetBEUI and/or NetBIOS over IPX will
-cause problems with browse list operation on most networks. Even Windows NT
-networks experience these problems when incorrectly configured Windows95
-systems share the same name space. It is important that only those protocols
-that are strictly needed for site specific reasons should EVER be installed.
-
-Secondly, and totally against common opinion, DHCP is NOT an evil design but is
-an extension of the BOOTP protocol that has been in use in Unix environments
-for many years without any of the melt-down problems that some sensationalists
-would have us believe can be experienced with DHCP. In fact, DHCP in covered by
-rfc1541 and is a very safe method of keeping an MS Windows desktop environment
-under control and for ensuring stable network operation.
-
-Please note that MS Windows systems as of MS Windows NT 3.1 and MS Windows 95
-store all network configuration settings a registry. There are a few reports
-from MS Windows network administrators that warrant mention here. It would appear
-that when one sets certain MS TCP/IP protocol settings (either directly or via
-DHCP) that these do get written to the registry. Even though a subsequent
-change of setting may occur the old value may persist in the registry. This
-has been known to create serious networking problems.
-
-An example of this occurs when a manual TCP/IP environment is configured to
-include a NetBIOS Scope. In this event, when the administrator then changes the
-configuration of the MS TCP/IP protocol stack, without first deleting the
-current settings, by simply checking the box to configure the MS TCP/IP stack
-via DHCP then the NetBIOS Scope that is still persistent in the registry WILL be
-applied to the resulting DHCP offered settings UNLESS the DHCP server also sets
-a NetBIOS Scope. It may therefore be prudent to forcibly apply a NULL NetBIOS
-Scope from your DHCP server. The can be done in the dhcpd.conf file with the
-parameter:
-         option netbios-scope "";
-
-While it is true that the Microsoft DHCP server that comes with Windows NT
-Server provides only a sub-set of rfc1533 functionality this is hardly an issue
-in those sites that already have a large investment and commitment to Unix
-systems and technologies. The current state of the art of the DHCP Server
-specification in covered in rfc2132.
-
-This document aims to provide enough background information so that the
-majority of site can without too much hardship get the Internet Software
-Consortium's (ISC) DHCP Server into operation. The key benefits of using DHCP
-includes:
-
-1) Automated IP Address space management and maximised re-use of available IP
-Addresses,
-
-2) Automated control of MS Windows client TCP/IP network configuration,
-
-3) Automatic recovery from start-up and run-time problems with Windows95.
-
-
-
-Client Configuration for SMB Networking:
-========================================
-SMB network clients need to be configured so that all standard TCP/IP name to
-address resolution works correctly. Once this has been achieved the SMB
-environment provides additional tools and services that act as helper agents in
-the translation of SMB (NetBIOS) names to their appropriate IP Addresses. One
-such helper agent is the NetBIOS Name Server (NBNS) or as Microsoft called it
-in their Windows NT Server implementation WINS (Windows Internet Name Server).
-
-A client needs to be configured so that it has a unique Machine (Computer)
-Name.
-
-This can be done, but needs a few NT registry hacks and you need to be able to
-speak UNICODE, which is of course no problem for a True Wizzard(tm) :)
-Instructions on how to do this (including a small util for less capable
-Wizzards) can be found at
-
-	http://www.unixtools.org/~nneul/sw/nt/dhcp-netbios-hostname.html
-
-
-All remaining TCP/IP networking parameters can be assigned via DHCP. These include:
-
-a) IP Address,
-b) Netmask,
-c) Gateway (Router) Address,
-d) DNS Domain Name,
-e) DNS Server addresses,
-f) WINS (NBNS) Server addresses,
-g) IP Forwarding,
-h) Timezone offset,
-i) Node Type,
-j) NetBIOS Scope
-
-Other assignments can be made from a DHCP server too, but the above cover the
-major needs.
-
-Note: IF ever an entry has has been made to the NetBIOS Scope field of the
-TCP/IP configuration panel on an MS Windows machine, and it has then been
-committed, then that setting may become persistent. In such a c ase it is better
-to configure the DHCP server with a NetBIOS Scope consisting of an empty string
-(ie: A NULL scope).
-
-
-DHCP Server Installation:
-=========================
-It is assumed that you will have obtained a copy of the GPL'd ISC DHCP server
-source files from ftp://ftp.isc.org/isc/dhcp, it is also assumed that you have
-compiled the sources and have installed the binary files.
-
-The following simply serves to provide sample configuration files to enable
-dhcpd to operate. The sample files assume that your site is configured to use
-private IP network address space using the Class B range of 172.16.1.0 -
-172.16.1.255 and is using a netmask of 255.255.255.0 (ie:24 bits). It is
-assumed that your router to the outside world is at 172.16.1.254 and that your
-Internet Domain Name is bestnet.com.au. The IP Address range 172.16.1.100 to
-172.16.1.240 has been set aside as your dynamically allocated range. In
-addition, bestnet.com.au have two print servers that need to obtain settings
-via BOOTP. The machine linux.bestnet.com.au has IP address 172.16.1.1 and is
-you primary Samba server with WINS support enabled by adding the parameter to
-the /etc/smb.conf file: [globals] wins support = yes. The dhcp lease time will
-be set to 20 hours.
-
-Configuration Files:
-====================
-Before dhcpd will run you need to install a file that speifies the
-configuration settings, and another that holds the database of issued IP
-addresses. On many systems these are stored in the /etc directory on the Unix
-system.
-
-Example /etc/dhcpd.conf:
-========================
-server-identifier linux.bestnet.com.au;
-
-subnet 172.16.1.0 netmask 255.255.255.0 {
-	range 172.16.1.100 172.16.1.240;
-	default-lease-time 72000;
-	max-lease-time 144000;
-	option subnet-mask 255.255.255.0;
-	option broadcast-address 172.16.1.255;
-	option routers 172.16.1.254;
-	option domain-name-servers 172.16.1.1, 172.16.1.2;
-	option domain-name "bestnet.com.au";
-	option time-offset 39600;
-	option ip-forwarding off;
-	option netbios-name-servers 172.16.0.1, 172.16.0.1;
-	option netbios-dd-server 172.16.0.1;
-	option netbios-node-type 8;
-        option netbios-scope "";
-}
-
-; Note: The above netbios-scope is purposely an empty (NULL) string.
-
-group {
-	next-server 172.16.1.10;
-	option subnet-mask 255.255.255.0;
-	option domain-name "bestnet.com.au";
-	option domain-name-servers 172.16.1.1, 172.16.0.2;
-	option netbios-name-servers 172.16.0.1, 172.16.0.1;
-	option netbios-dd-server 172.16.0.1;
-	option netbios-node-type 8;
-        option netbios-scope "SomeCrazyScope";
-	option routers 172.16.1.240;
-	option time-offset 39600;
-	host lexmark1 {
-		hardware ethernet 06:07:08:09:0a:0b;
-		fixed-address 172.16.1.245;
-	}
-	host epson4 {
-		hardware ethernet 01:02:03:04:05:06;
-		fixed-address 172.16.1.242;
-	}
-}
-
-
-Creating the /etc/dhcpd.leases file:
-====================================
-At a Unix shell create an empty dhcpd.leases file in the /etc directory.
-You can do this by typing:	cp /dev/null /etc/dhcpd.leases
-
-
-Setting up a route table for all-ones addresses:
-================================================
-Quoting from the README file that comes with the ISC DHCPD Server:
-
-                              BROADCAST
-
-In order for dhcpd to work correctly with picky DHCP clients (e.g.,
-Windows 95), it must be able to send packets with an IP destination
-address of 255.255.255.255.  Unfortunately, Linux insists on changing
-255.255.255.255 into the local subnet broadcast address (here, that's
-192.5.5.223).  This results in a DHCP protocol violation, and while
-many DHCP clients don't notice the problem, some (e.g., all Microsoft
-DHCP clients) do.  Clients that have this problem will appear not to
-see DHCPOFFER messages from the server.
-
-It is possible to work around this problem on some versions of Linux
-by creating a host route from your network interface address to
-255.255.255.255.   The command you need to use to do this on Linux
-varies from version to version.   The easiest version is:
-
-	route add -host 255.255.255.255 dev eth0
-
-On some older Linux systems, you will get an error if you try to do
-this.   On those systems, try adding the following entry to your
-/etc/hosts file:
-
-255.255.255.255	all-ones
-
-Then, try:
-
-	route add -host all-ones dev eth0
-
-
-For more information please refer to the ISC DHCPD Server documentation.
diff --git a/docs/textdocs/Faxing.txt b/docs/textdocs/Faxing.txt
deleted file mode 100644
index 0703d75cc35..00000000000
--- a/docs/textdocs/Faxing.txt
+++ /dev/null
@@ -1,220 +0,0 @@
-Contributor:    Gerhard Zuber <zuber@berlin.snafu.de>
-Date:			August 5th 1997.
-Status:			Current
-
-Subject:        F A X I N G   with  S A M B A
-==========================================================================
-
-This text describes how to turn your SAMBA-server into a fax-server
-for any environment, especially for Windows.
-   Author: Gerhard Zuber <zuber@berlin.snafu.de>
-   Version: 1.4
-   Date: 04. Aug. 1997
-
-Requirements:
-   UNIX box (Linux preferred) with SAMBA and a faxmodem
-   ghostscript package
-   mgetty+sendfax package
-   pbm package (portable bitmap tools)
-
-FTP sites:
-   sunsite.unc.edu:/pub/Linux/system/Serial/mgetty+sendfax*
-   tsx-11.mit.edu:/pub/linux/sources/sbin/mgetty+sendfax
-   ftp.leo.org:/pub/comp/networking/communication/modem/mgetty/mgetty1.1.6-May05.tar.gz
-
-   pbm10dec91.tgz
-   ftp.leo.org:/pub/comp/networking/communication/modem/mgetty/pbm10dec91.tgz
-   sunsite.unc.edu: ..../apps/graphics/convert/pbmplus-10dec91-bin.tar.gz
-   ftp.gwdg.de/pub/linux/grafik/pbmplus.src.tar.Z (this is 10dec91 source)
-                 or ???   pbm10dec91.tgz pbmplus10dec91.tgz
-
-
-making mgetty+sendfax running:
-==============================
-
-   go to source tree: /usr/src/mgetty+sendfax
-   cp policy.h-dist policy.h
-
-   change your settings: valid tty ports, modem initstring, Station-Id
-
-#define MODEM_INIT_STRING       "AT &F S0=0 &D3 &K3 &C1\\\\N2"
-
-#define FAX_STATION_ID  "49 30 12345678"
-
-#define FAX_MODEM_TTYS  "ttyS1:ttyS2:ttyS3"
-
-   Modem initstring is for rockwell based modems
-   if you want to use mgetty+sendfax as PPP-dialin-server,
-   define AUTO_PPP in Makefile:
-
-CFLAGS=-O2 -Wall -pipe -DAUTO_PPP
-
-   compile it and install the package.
-   edit your /etc/inittab and let mgetty running on your preferred
-   ports:
-
-s3:45:respawn:/usr/local/sbin/mgetty ttyS2 vt100
-
-   now issue a
-      kill -HUP 1
-   and enjoy with the lightning LEDs on your modem
-   your now are ready to receive faxes !
-
-
-   if you want a PPP dialin-server, edit 
-      /usr/local/etc/mgetty+sendfax/login.config
-
-/AutoPPP/ -     ppp     /usr/sbin/pppd auth debug passive modem 
-
-
-   Note: this package automatically decides between a fax call and
-         a modem call. In case of modem call you get a login prompt !
-
-Tools for printing faxes:
-=========================
-
-   your incomed faxes are in:
-    /var/spool/fax/incoming
-
-   print it with:
-
-     for i in *
-     do
-     g3cat $i | g3tolj | lpr -P hp
-     done
-
-   in case of low resolution use instead:
-
-     g3cat $i | g3tolj -aspect 2 | lpr -P hp
-
-
-   g3cat is in the tools-section, g3tolj is in the contrib-section
-   for printing to HP lasers.
-
-   If you want to produce files for displaying and printing with Windows, use
-   some tools from the pbm-package like follow
-
-     g3cat $i | g3topbm - |  ppmtopcx - >$i.pcx  
-
-   and view it with your favourite Windows tool (maybe paintbrush)
-
-
-Now making the fax-server:
-===========================
-
-    fetch the file
-       mgetty+sendfax/frontends/winword/faxfilter
-
-    and place it in
-
-      /usr/local/etc/mgetty+sendfax/
-
-    prepare your faxspool file as mentioned in this file
-    edit fax/faxspool.in and reinstall or change the final
-    /usr/local/bin/faxspool too.
-
-            if [ "$user" = "root" -o "$user" = "fax" -o \
-                 "$user" = "lp" -o "$user" = "daemon" -o "$user" = "bin" ]
-
-    find the first line and change the second.
-
-    make sure you have pbmtext (from the pbm-package). This is
-    needed for creating the small header line on each page.
-    Notes on pbmplus:
-    Some peoples had problems with precompiled binaries (especially
-    at linux) with a shared lib libgr.so.x.x. The better way is
-    to fetch the source and compile it. One needs only pbmtext for
-    generating the small line on top of each page /faxheader). Install
-    only the individual programs you need. If you install the full
-    package then install pbmplus first and then mgetty+sendfax, because
-    this package has some changed programs by itself (but not pbmtext).
-
-    make sure your ghostscript is functional. You need fonts !
-    I prefer these from the OS/2 disks
-
-    prepare your faxheader
-      /usr/local/etc/mgetty+sendfax/faxheader
-
-    edit your /etc/printcap file:
-
-# FAX 
-lp3|fax:\
-        :lp=/dev/null:\
-        :sd=/usr/spool/lp3:\
-        :if=/usr/local/etc/mgetty+sendfax/faxfilter:sh:sf:mx#0:\
-        :lf=/usr/spool/lp3/fax-log:
-
-
-
-
-    edit your /usr/local/samba/lib/smb.conf
-
-    so you have a smb based printer named "fax"
-
-
-The final step:
-===============
-
-    Now you have a printer called "fax" which can be used via
-    TCP/IP-printing (lpd-system) or via SAMBA (windows printing).
-
-    On every system you are able to produce postscript-files you
-    are ready to fax.
-
-    On Windows 3.1 95 and NT:
-
-    Install a printer wich produces postscript output,
-       e.g.  apple laserwriter
-
-    connect the "fax" to your printer 
-
-
-    Now write your first fax. Use your favourite wordprocessor,
-    write, winword, notepad or whatever you want, and start
-    with the headerpage.
-
-    Usually each fax has a header page. It carries your name,
-    your address, your phone/fax-number.
-
-    It carries also the recipient, his address and his *** fax
-    number ***. Now here is the trick:
-
-    Use the text:
-       Fax-Nr: 123456789
-    as the recipients fax-number. Make sure this text does not
-    occur in regular text ! Make sure this text is not broken
-    by formatting information, e.g. format it as a single entity.
-    (Windows Write and Win95 Wordpad are functional, maybe newer
-    versions of Winword are breaking formatting information).
-
-    The trick is that postscript output is human readable and
-    the faxfilter program scans the text for this pattern and
-    uses the found number as the fax-destination-number.
-
-    Now print your fax through the fax-printer and it will be
-    queued for later transmission. Use faxrunq for sending the
-    queue out.
-
-    Notes of SAMBA smb.conf:
-    Simply use fall through from the samba printer to the unix
-    printer. Sample:
-
-
- printcap name = /etc/printcap
- print command = /usr/bin/lpr -r -P %p %s
- lpq command = /usr/bin/lpq -P %p
- lprm command = /usr/bin/lprm -P %p %j
-
-
-[fax]
-    comment = FAX (mgetty+sendfax)
-    path = /tmp
-    printable = yes
-    public = yes
-    writable = no
-    create mode = 0700
-    browseable = yes
-    guest ok = no
-
-
-