summaryrefslogtreecommitdiff
path: root/doc/rluserman.html
diff options
context:
space:
mode:
Diffstat (limited to 'doc/rluserman.html')
-rw-r--r--doc/rluserman.html374
1 files changed, 196 insertions, 178 deletions
diff --git a/doc/rluserman.html b/doc/rluserman.html
index 6055fbe..3d8595b 100644
--- a/doc/rluserman.html
+++ b/doc/rluserman.html
@@ -1,6 +1,6 @@
<HTML>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<!-- Created on July, 27 2004 by texi2html 1.64 -->
+<!-- Created on December, 6 2005 by texi2html 1.64 -->
<!--
Written by: Lionel Cons <Lionel.Cons@cern.ch> (original author)
Karl Berry <karl@freefriends.org>
@@ -559,7 +559,12 @@ change from the default Emacs-like key binding to use
</pre></td></tr></table></P><P>
Variable names and values, where appropriate, are recognized without regard
-to case.
+to case. Unrecognized variable names are ignored.
+</P><P>
+
+Boolean variables (those that can be set to on or off) are set to on if
+the value is null or empty, <VAR>on</VAR> (case-insensitive), or 1. Any other
+value results in the variable being set to off.
</P><P>
A great deal of run-time behavior is changeable with the following
@@ -578,8 +583,15 @@ If set to <SAMP>`audible'</SAMP> (the default), Readline attempts to ring
the terminal's bell.
<P>
-<DT><CODE>comment-begin</CODE>
+<DT><CODE>bind-tty-special-chars</CODE>
<DD><A NAME="IDX6"></A>
+If set to <SAMP>`on'</SAMP>, Readline attempts to bind the control characters
+treated specially by the kernel's terminal driver to their Readline
+equivalents.
+<P>
+
+<DT><CODE>comment-begin</CODE>
+<DD><A NAME="IDX7"></A>
The string to insert at the beginning of the line when the
<CODE>insert-comment</CODE> command is executed. The default value
is <CODE>"#"</CODE>.
@@ -592,18 +604,19 @@ The default value is <SAMP>`off'</SAMP>.
<P>
<DT><CODE>completion-query-items</CODE>
-<DD><A NAME="IDX7"></A>
+<DD><A NAME="IDX8"></A>
The number of possible completions that determines when the user is
asked whether the list of possibilities should be displayed.
If the number of possible completions is greater than this value,
Readline will ask the user whether or not he wishes to view
them; otherwise, they are simply listed.
This variable must be set to an integer value greater than or equal to 0.
+A negative value means Readline should never ask.
The default limit is <CODE>100</CODE>.
<P>
<DT><CODE>convert-meta</CODE>
-<DD><A NAME="IDX8"></A>
+<DD><A NAME="IDX9"></A>
If set to <SAMP>`on'</SAMP>, Readline will convert characters with the
eighth bit set to an ASCII key sequence by stripping the eighth
bit and prefixing an <KBD>ESC</KBD> character, converting them to a
@@ -611,14 +624,14 @@ meta-prefixed key sequence. The default value is <SAMP>`on'</SAMP>.
<P>
<DT><CODE>disable-completion</CODE>
-<DD><A NAME="IDX9"></A>
+<DD><A NAME="IDX10"></A>
If set to <SAMP>`On'</SAMP>, Readline will inhibit word completion.
Completion characters will be inserted into the line as if they had
been mapped to <CODE>self-insert</CODE>. The default is <SAMP>`off'</SAMP>.
<P>
<DT><CODE>editing-mode</CODE>
-<DD><A NAME="IDX10"></A>
+<DD><A NAME="IDX11"></A>
The <CODE>editing-mode</CODE> variable controls which default set of
key bindings is used. By default, Readline starts up in Emacs editing
mode, where the keystrokes are most similar to Emacs. This variable can be
@@ -626,26 +639,27 @@ set to either <SAMP>`emacs'</SAMP> or <SAMP>`vi'</SAMP>.
<P>
<DT><CODE>enable-keypad</CODE>
-<DD><A NAME="IDX11"></A>
+<DD><A NAME="IDX12"></A>
When set to <SAMP>`on'</SAMP>, Readline will try to enable the application
keypad when it is called. Some systems need this to enable the
arrow keys. The default is <SAMP>`off'</SAMP>.
<P>
<DT><CODE>expand-tilde</CODE>
-<DD><A NAME="IDX12"></A>
+<DD><A NAME="IDX13"></A>
If set to <SAMP>`on'</SAMP>, tilde expansion is performed when Readline
attempts word completion. The default is <SAMP>`off'</SAMP>.
<P>
-<A NAME="IDX13"></A>
+<DT><CODE>history-preserve-point</CODE>
+<DD><A NAME="IDX14"></A>
If set to <SAMP>`on'</SAMP>, the history code attempts to place point at the
same location on each history line retrieved with <CODE>previous-history</CODE>
-or <CODE>next-history</CODE>.
-</P><P>
+or <CODE>next-history</CODE>. The default is <SAMP>`off'</SAMP>.
+<P>
<DT><CODE>horizontal-scroll-mode</CODE>
-<DD><A NAME="IDX14"></A>
+<DD><A NAME="IDX15"></A>
This variable can be set to either <SAMP>`on'</SAMP> or <SAMP>`off'</SAMP>. Setting it
to <SAMP>`on'</SAMP> means that the text of the lines being edited will scroll
horizontally on a single screen line when they are longer than the width
@@ -654,8 +668,8 @@ this variable is set to <SAMP>`off'</SAMP>.
<P>
<DT><CODE>input-meta</CODE>
-<DD><A NAME="IDX15"></A>
-<A NAME="IDX16"></A>
+<DD><A NAME="IDX16"></A>
+<A NAME="IDX17"></A>
If set to <SAMP>`on'</SAMP>, Readline will enable eight-bit input (it
will not clear the eighth bit in the characters it reads),
regardless of what the terminal claims it can support. The
@@ -664,7 +678,7 @@ synonym for this variable.
<P>
<DT><CODE>isearch-terminators</CODE>
-<DD><A NAME="IDX17"></A>
+<DD><A NAME="IDX18"></A>
The string of characters that should terminate an incremental search without
subsequently executing the character as a command (see section <A HREF="rluserman.html#SEC8">1.2.5 Searching for Commands in the History</A>).
If this variable has not been given a value, the characters <KBD>ESC</KBD> and
@@ -672,7 +686,7 @@ If this variable has not been given a value, the characters <KBD>ESC</KBD> and
<P>
<DT><CODE>keymap</CODE>
-<DD><A NAME="IDX18"></A>
+<DD><A NAME="IDX19"></A>
Sets Readline's idea of the current keymap for key binding commands.
Acceptable <CODE>keymap</CODE> names are
<CODE>emacs</CODE>,
@@ -695,14 +709,14 @@ appended. The default is <SAMP>`on'</SAMP>.
<P>
<DT><CODE>mark-modified-lines</CODE>
-<DD><A NAME="IDX19"></A>
+<DD><A NAME="IDX20"></A>
This variable, when set to <SAMP>`on'</SAMP>, causes Readline to display an
asterisk (<SAMP>`*'</SAMP>) at the start of history lines which have been modified.
This variable is <SAMP>`off'</SAMP> by default.
<P>
<DT><CODE>mark-symlinked-directories</CODE>
-<DD><A NAME="IDX20"></A>
+<DD><A NAME="IDX21"></A>
If set to <SAMP>`on'</SAMP>, completed names which are symbolic links
to directories have a slash appended (subject to the value of
<CODE>mark-directories</CODE>).
@@ -710,7 +724,7 @@ The default is <SAMP>`off'</SAMP>.
<P>
<DT><CODE>match-hidden-files</CODE>
-<DD><A NAME="IDX21"></A>
+<DD><A NAME="IDX22"></A>
This variable, when set to <SAMP>`on'</SAMP>, causes Readline to match files whose
names begin with a <SAMP>`.'</SAMP> (hidden files) when performing filename
completion, unless the leading <SAMP>`.'</SAMP> is
@@ -719,14 +733,14 @@ This variable is <SAMP>`on'</SAMP> by default.
<P>
<DT><CODE>output-meta</CODE>
-<DD><A NAME="IDX22"></A>
+<DD><A NAME="IDX23"></A>
If set to <SAMP>`on'</SAMP>, Readline will display characters with the
eighth bit set directly rather than as a meta-prefixed escape
sequence. The default is <SAMP>`off'</SAMP>.
<P>
<DT><CODE>page-completions</CODE>
-<DD><A NAME="IDX23"></A>
+<DD><A NAME="IDX24"></A>
If set to <SAMP>`on'</SAMP>, Readline uses an internal <CODE>more</CODE>-like pager
to display a screenful of possible completions at a time.
This variable is <SAMP>`on'</SAMP> by default.
@@ -739,7 +753,7 @@ The default is <SAMP>`off'</SAMP>.
<P>
<DT><CODE>show-all-if-ambiguous</CODE>
-<DD><A NAME="IDX24"></A>
+<DD><A NAME="IDX25"></A>
This alters the default behavior of the completion functions. If
set to <SAMP>`on'</SAMP>,
words which have more than one possible completion cause the
@@ -748,7 +762,7 @@ The default value is <SAMP>`off'</SAMP>.
<P>
<DT><CODE>show-all-if-unmodified</CODE>
-<DD><A NAME="IDX25"></A>
+<DD><A NAME="IDX26"></A>
This alters the default behavior of the completion functions in
a fashion similar to <VAR>show-all-if-ambiguous</VAR>.
If set to <SAMP>`on'</SAMP>,
@@ -760,7 +774,7 @@ The default value is <SAMP>`off'</SAMP>.
<P>
<DT><CODE>visible-stats</CODE>
-<DD><A NAME="IDX26"></A>
+<DD><A NAME="IDX27"></A>
If set to <SAMP>`on'</SAMP>, a character denoting a file's type
is appended to the filename when listing possible
completions. The default is <SAMP>`off'</SAMP>.
@@ -1174,54 +1188,54 @@ The text between the point and mark is referred to as the <EM>region</EM>.
<H3> 1.4.1 Commands For Moving </H3>
<!--docid::SEC14::-->
<DL COMPACT>
-<A NAME="IDX27"></A>
+<A NAME="IDX28"></A>
<DT><CODE>beginning-of-line (C-a)</CODE>
-<DD><A NAME="IDX28"></A>
+<DD><A NAME="IDX29"></A>
Move to the start of the current line.
<P>
-<A NAME="IDX29"></A>
+<A NAME="IDX30"></A>
<DT><CODE>end-of-line (C-e)</CODE>
-<DD><A NAME="IDX30"></A>
+<DD><A NAME="IDX31"></A>
Move to the end of the line.
<P>
-<A NAME="IDX31"></A>
+<A NAME="IDX32"></A>
<DT><CODE>forward-char (C-f)</CODE>
-<DD><A NAME="IDX32"></A>
+<DD><A NAME="IDX33"></A>
Move forward a character.
<P>
-<A NAME="IDX33"></A>
+<A NAME="IDX34"></A>
<DT><CODE>backward-char (C-b)</CODE>
-<DD><A NAME="IDX34"></A>
+<DD><A NAME="IDX35"></A>
Move back a character.
<P>
-<A NAME="IDX35"></A>
+<A NAME="IDX36"></A>
<DT><CODE>forward-word (M-f)</CODE>
-<DD><A NAME="IDX36"></A>
+<DD><A NAME="IDX37"></A>
Move forward to the end of the next word. Words are composed of
letters and digits.
<P>
-<A NAME="IDX37"></A>
+<A NAME="IDX38"></A>
<DT><CODE>backward-word (M-b)</CODE>
-<DD><A NAME="IDX38"></A>
+<DD><A NAME="IDX39"></A>
Move back to the start of the current or previous word. Words are
composed of letters and digits.
<P>
-<A NAME="IDX39"></A>
+<A NAME="IDX40"></A>
<DT><CODE>clear-screen (C-l)</CODE>
-<DD><A NAME="IDX40"></A>
+<DD><A NAME="IDX41"></A>
Clear the screen and redraw the current line,
leaving the current line at the top of the screen.
<P>
-<A NAME="IDX41"></A>
+<A NAME="IDX42"></A>
<DT><CODE>redraw-current-line ()</CODE>
-<DD><A NAME="IDX42"></A>
+<DD><A NAME="IDX43"></A>
Refresh the current line. By default, this is unbound.
<P>
@@ -1247,9 +1261,9 @@ Refresh the current line. By default, this is unbound.
<P>
<DL COMPACT>
-<A NAME="IDX43"></A>
+<A NAME="IDX44"></A>
<DT><CODE>accept-line (Newline or Return)</CODE>
-<DD><A NAME="IDX44"></A>
+<DD><A NAME="IDX45"></A>
Accept the line regardless of where the cursor is.
If this line is
non-empty, it may be added to the history list for future recall with
@@ -1258,97 +1272,101 @@ If this line is a modified history line, the history line is restored
to its original state.
<P>
-<A NAME="IDX45"></A>
+<A NAME="IDX46"></A>
<DT><CODE>previous-history (C-p)</CODE>
-<DD><A NAME="IDX46"></A>
+<DD><A NAME="IDX47"></A>
Move `back' through the history list, fetching the previous command.
<P>
-<A NAME="IDX47"></A>
+<A NAME="IDX48"></A>
<DT><CODE>next-history (C-n)</CODE>
-<DD><A NAME="IDX48"></A>
+<DD><A NAME="IDX49"></A>
Move `forward' through the history list, fetching the next command.
<P>
-<A NAME="IDX49"></A>
+<A NAME="IDX50"></A>
<DT><CODE>beginning-of-history (M-&#60;)</CODE>
-<DD><A NAME="IDX50"></A>
+<DD><A NAME="IDX51"></A>
Move to the first line in the history.
<P>
-<A NAME="IDX51"></A>
+<A NAME="IDX52"></A>
<DT><CODE>end-of-history (M-&#62;)</CODE>
-<DD><A NAME="IDX52"></A>
+<DD><A NAME="IDX53"></A>
Move to the end of the input history, i.e., the line currently
being entered.
<P>
-<A NAME="IDX53"></A>
+<A NAME="IDX54"></A>
<DT><CODE>reverse-search-history (C-r)</CODE>
-<DD><A NAME="IDX54"></A>
+<DD><A NAME="IDX55"></A>
Search backward starting at the current line and moving `up' through
the history as necessary. This is an incremental search.
<P>
-<A NAME="IDX55"></A>
+<A NAME="IDX56"></A>
<DT><CODE>forward-search-history (C-s)</CODE>
-<DD><A NAME="IDX56"></A>
+<DD><A NAME="IDX57"></A>
Search forward starting at the current line and moving `down' through
the the history as necessary. This is an incremental search.
<P>
-<A NAME="IDX57"></A>
+<A NAME="IDX58"></A>
<DT><CODE>non-incremental-reverse-search-history (M-p)</CODE>
-<DD><A NAME="IDX58"></A>
+<DD><A NAME="IDX59"></A>
Search backward starting at the current line and moving `up'
through the history as necessary using a non-incremental search
for a string supplied by the user.
<P>
-<A NAME="IDX59"></A>
+<A NAME="IDX60"></A>
<DT><CODE>non-incremental-forward-search-history (M-n)</CODE>
-<DD><A NAME="IDX60"></A>
+<DD><A NAME="IDX61"></A>
Search forward starting at the current line and moving `down'
through the the history as necessary using a non-incremental search
for a string supplied by the user.
<P>
-<A NAME="IDX61"></A>
+<A NAME="IDX62"></A>
<DT><CODE>history-search-forward ()</CODE>
-<DD><A NAME="IDX62"></A>
+<DD><A NAME="IDX63"></A>
Search forward through the history for the string of characters
between the start of the current line and the point.
This is a non-incremental search.
By default, this command is unbound.
<P>
-<A NAME="IDX63"></A>
+<A NAME="IDX64"></A>
<DT><CODE>history-search-backward ()</CODE>
-<DD><A NAME="IDX64"></A>
+<DD><A NAME="IDX65"></A>
Search backward through the history for the string of characters
between the start of the current line and the point. This
is a non-incremental search. By default, this command is unbound.
<P>
-<A NAME="IDX65"></A>
+<A NAME="IDX66"></A>
<DT><CODE>yank-nth-arg (M-C-y)</CODE>
-<DD><A NAME="IDX66"></A>
+<DD><A NAME="IDX67"></A>
Insert the first argument to the previous command (usually
the second word on the previous line) at point.
With an argument <VAR>n</VAR>,
insert the <VAR>n</VAR>th word from the previous command (the words
in the previous command begin with word 0). A negative argument
inserts the <VAR>n</VAR>th word from the end of the previous command.
+Once the argument <VAR>n</VAR> is computed, the argument is extracted
+as if the <SAMP>`!<VAR>n</VAR>'</SAMP> history expansion had been specified.
<P>
-<A NAME="IDX67"></A>
+<A NAME="IDX68"></A>
<DT><CODE>yank-last-arg (M-. or M-_)</CODE>
-<DD><A NAME="IDX68"></A>
+<DD><A NAME="IDX69"></A>
Insert last argument to the previous command (the last word of the
previous history entry). With an
argument, behave exactly like <CODE>yank-nth-arg</CODE>.
Successive calls to <CODE>yank-last-arg</CODE> move back through the history
list, inserting the last argument of each line in turn.
+The history expansion facilities are used to extract the last argument,
+as if the <SAMP>`!$'</SAMP> history expansion had been specified.
<P>
</DL>
@@ -1373,52 +1391,52 @@ list, inserting the last argument of each line in turn.
<P>
<DL COMPACT>
-<A NAME="IDX69"></A>
+<A NAME="IDX70"></A>
<DT><CODE>delete-char (C-d)</CODE>
-<DD><A NAME="IDX70"></A>
+<DD><A NAME="IDX71"></A>
Delete the character at point. If point is at the
beginning of the line, there are no characters in the line, and
the last character typed was not bound to <CODE>delete-char</CODE>, then
return EOF.
<P>
-<A NAME="IDX71"></A>
+<A NAME="IDX72"></A>
<DT><CODE>backward-delete-char (Rubout)</CODE>
-<DD><A NAME="IDX72"></A>
+<DD><A NAME="IDX73"></A>
Delete the character behind the cursor. A numeric argument means
to kill the characters instead of deleting them.
<P>
-<A NAME="IDX73"></A>
+<A NAME="IDX74"></A>
<DT><CODE>forward-backward-delete-char ()</CODE>
-<DD><A NAME="IDX74"></A>
+<DD><A NAME="IDX75"></A>
Delete the character under the cursor, unless the cursor is at the
end of the line, in which case the character behind the cursor is
deleted. By default, this is not bound to a key.
<P>
-<A NAME="IDX75"></A>
+<A NAME="IDX76"></A>
<DT><CODE>quoted-insert (C-q or C-v)</CODE>
-<DD><A NAME="IDX76"></A>
+<DD><A NAME="IDX77"></A>
Add the next character typed to the line verbatim. This is
how to insert key sequences like <KBD>C-q</KBD>, for example.
<P>
-<A NAME="IDX77"></A>
+<A NAME="IDX78"></A>
<DT><CODE>tab-insert (M-<KBD>TAB</KBD>)</CODE>
-<DD><A NAME="IDX78"></A>
+<DD><A NAME="IDX79"></A>
Insert a tab character.
<P>
-<A NAME="IDX79"></A>
+<A NAME="IDX80"></A>
<DT><CODE>self-insert (a, b, A, 1, !, <small>...</small>)</CODE>
-<DD><A NAME="IDX80"></A>
+<DD><A NAME="IDX81"></A>
Insert yourself.
<P>
-<A NAME="IDX81"></A>
+<A NAME="IDX82"></A>
<DT><CODE>transpose-chars (C-t)</CODE>
-<DD><A NAME="IDX82"></A>
+<DD><A NAME="IDX83"></A>
Drag the character before the cursor forward over
the character at the cursor, moving the
cursor forward as well. If the insertion point
@@ -1427,39 +1445,39 @@ transposes the last two characters of the line.
Negative arguments have no effect.
<P>
-<A NAME="IDX83"></A>
+<A NAME="IDX84"></A>
<DT><CODE>transpose-words (M-t)</CODE>
-<DD><A NAME="IDX84"></A>
+<DD><A NAME="IDX85"></A>
Drag the word before point past the word after point,
moving point past that word as well.
If the insertion point is at the end of the line, this transposes
the last two words on the line.
<P>
-<A NAME="IDX85"></A>
+<A NAME="IDX86"></A>
<DT><CODE>upcase-word (M-u)</CODE>
-<DD><A NAME="IDX86"></A>
+<DD><A NAME="IDX87"></A>
Uppercase the current (or following) word. With a negative argument,
uppercase the previous word, but do not move the cursor.
<P>
-<A NAME="IDX87"></A>
+<A NAME="IDX88"></A>
<DT><CODE>downcase-word (M-l)</CODE>
-<DD><A NAME="IDX88"></A>
+<DD><A NAME="IDX89"></A>
Lowercase the current (or following) word. With a negative argument,
lowercase the previous word, but do not move the cursor.
<P>
-<A NAME="IDX89"></A>
+<A NAME="IDX90"></A>
<DT><CODE>capitalize-word (M-c)</CODE>
-<DD><A NAME="IDX90"></A>
+<DD><A NAME="IDX91"></A>
Capitalize the current (or following) word. With a negative argument,
capitalize the previous word, but do not move the cursor.
<P>
-<A NAME="IDX91"></A>
+<A NAME="IDX92"></A>
<DT><CODE>overwrite-mode ()</CODE>
-<DD><A NAME="IDX92"></A>
+<DD><A NAME="IDX93"></A>
Toggle overwrite mode. With an explicit positive numeric argument,
switches to overwrite mode. With an explicit non-positive numeric
argument, switches to insert mode. This command affects only
@@ -1499,106 +1517,106 @@ By default, this command is unbound.
<DL COMPACT>
-<A NAME="IDX93"></A>
+<A NAME="IDX94"></A>
<DT><CODE>kill-line (C-k)</CODE>
-<DD><A NAME="IDX94"></A>
+<DD><A NAME="IDX95"></A>
Kill the text from point to the end of the line.
<P>
-<A NAME="IDX95"></A>
+<A NAME="IDX96"></A>
<DT><CODE>backward-kill-line (C-x Rubout)</CODE>
-<DD><A NAME="IDX96"></A>
+<DD><A NAME="IDX97"></A>
Kill backward to the beginning of the line.
<P>
-<A NAME="IDX97"></A>
+<A NAME="IDX98"></A>
<DT><CODE>unix-line-discard (C-u)</CODE>
-<DD><A NAME="IDX98"></A>
+<DD><A NAME="IDX99"></A>
Kill backward from the cursor to the beginning of the current line.
<P>
-<A NAME="IDX99"></A>
+<A NAME="IDX100"></A>
<DT><CODE>kill-whole-line ()</CODE>
-<DD><A NAME="IDX100"></A>
+<DD><A NAME="IDX101"></A>
Kill all characters on the current line, no matter where point is.
By default, this is unbound.
<P>
-<A NAME="IDX101"></A>
+<A NAME="IDX102"></A>
<DT><CODE>kill-word (M-d)</CODE>
-<DD><A NAME="IDX102"></A>
+<DD><A NAME="IDX103"></A>
Kill from point to the end of the current word, or if between
words, to the end of the next word.
Word boundaries are the same as <CODE>forward-word</CODE>.
<P>
-<A NAME="IDX103"></A>
+<A NAME="IDX104"></A>
<DT><CODE>backward-kill-word (M-<KBD>DEL</KBD>)</CODE>
-<DD><A NAME="IDX104"></A>
+<DD><A NAME="IDX105"></A>
Kill the word behind point.
Word boundaries are the same as <CODE>backward-word</CODE>.
<P>
-<A NAME="IDX105"></A>
+<A NAME="IDX106"></A>
<DT><CODE>unix-word-rubout (C-w)</CODE>
-<DD><A NAME="IDX106"></A>
+<DD><A NAME="IDX107"></A>
Kill the word behind point, using white space as a word boundary.
The killed text is saved on the kill-ring.
<P>
-<A NAME="IDX107"></A>
+<A NAME="IDX108"></A>
<DT><CODE>unix-filename-rubout ()</CODE>
-<DD><A NAME="IDX108"></A>
+<DD><A NAME="IDX109"></A>
Kill the word behind point, using white space and the slash character
as the word boundaries.
The killed text is saved on the kill-ring.
<P>
-<A NAME="IDX109"></A>
+<A NAME="IDX110"></A>
<DT><CODE>delete-horizontal-space ()</CODE>
-<DD><A NAME="IDX110"></A>
+<DD><A NAME="IDX111"></A>
Delete all spaces and tabs around point. By default, this is unbound.
<P>
-<A NAME="IDX111"></A>
+<A NAME="IDX112"></A>
<DT><CODE>kill-region ()</CODE>
-<DD><A NAME="IDX112"></A>
+<DD><A NAME="IDX113"></A>
Kill the text in the current region.
By default, this command is unbound.
<P>
-<A NAME="IDX113"></A>
+<A NAME="IDX114"></A>
<DT><CODE>copy-region-as-kill ()</CODE>
-<DD><A NAME="IDX114"></A>
+<DD><A NAME="IDX115"></A>
Copy the text in the region to the kill buffer, so it can be yanked
right away. By default, this command is unbound.
<P>
-<A NAME="IDX115"></A>
+<A NAME="IDX116"></A>
<DT><CODE>copy-backward-word ()</CODE>
-<DD><A NAME="IDX116"></A>
+<DD><A NAME="IDX117"></A>
Copy the word before point to the kill buffer.
The word boundaries are the same as <CODE>backward-word</CODE>.
By default, this command is unbound.
<P>
-<A NAME="IDX117"></A>
+<A NAME="IDX118"></A>
<DT><CODE>copy-forward-word ()</CODE>
-<DD><A NAME="IDX118"></A>
+<DD><A NAME="IDX119"></A>
Copy the word following point to the kill buffer.
The word boundaries are the same as <CODE>forward-word</CODE>.
By default, this command is unbound.
<P>
-<A NAME="IDX119"></A>
+<A NAME="IDX120"></A>
<DT><CODE>yank (C-y)</CODE>
-<DD><A NAME="IDX120"></A>
+<DD><A NAME="IDX121"></A>
Yank the top of the kill ring into the buffer at point.
<P>
-<A NAME="IDX121"></A>
+<A NAME="IDX122"></A>
<DT><CODE>yank-pop (M-y)</CODE>
-<DD><A NAME="IDX122"></A>
+<DD><A NAME="IDX123"></A>
Rotate the kill-ring, and yank the new top. You can only do this if
the prior command is <CODE>yank</CODE> or <CODE>yank-pop</CODE>.
</DL>
@@ -1622,16 +1640,16 @@ the prior command is <CODE>yank</CODE> or <CODE>yank-pop</CODE>.
<!--docid::SEC18::-->
<DL COMPACT>
-<A NAME="IDX123"></A>
+<A NAME="IDX124"></A>
<DT><CODE>digit-argument (<KBD>M-0</KBD>, <KBD>M-1</KBD>, <small>...</small> <KBD>M--</KBD>)</CODE>
-<DD><A NAME="IDX124"></A>
+<DD><A NAME="IDX125"></A>
Add this digit to the argument already accumulating, or start a new
argument. <KBD>M--</KBD> starts a negative argument.
<P>
-<A NAME="IDX125"></A>
+<A NAME="IDX126"></A>
<DT><CODE>universal-argument ()</CODE>
-<DD><A NAME="IDX126"></A>
+<DD><A NAME="IDX127"></A>
This is another way to specify an argument.
If this command is followed by one or more digits, optionally with a
leading minus sign, those digits define the argument.
@@ -1666,30 +1684,30 @@ By default, this is not bound to a key.
<P>
<DL COMPACT>
-<A NAME="IDX127"></A>
+<A NAME="IDX128"></A>
<DT><CODE>complete (<KBD>TAB</KBD>)</CODE>
-<DD><A NAME="IDX128"></A>
+<DD><A NAME="IDX129"></A>
Attempt to perform completion on the text before point.
The actual completion performed is application-specific.
The default is filename completion.
<P>
-<A NAME="IDX129"></A>
+<A NAME="IDX130"></A>
<DT><CODE>possible-completions (M-?)</CODE>
-<DD><A NAME="IDX130"></A>
+<DD><A NAME="IDX131"></A>
List the possible completions of the text before point.
<P>
-<A NAME="IDX131"></A>
+<A NAME="IDX132"></A>
<DT><CODE>insert-completions (M-*)</CODE>
-<DD><A NAME="IDX132"></A>
+<DD><A NAME="IDX133"></A>
Insert all completions of the text before point that would have
been generated by <CODE>possible-completions</CODE>.
<P>
-<A NAME="IDX133"></A>
+<A NAME="IDX134"></A>
<DT><CODE>menu-complete ()</CODE>
-<DD><A NAME="IDX134"></A>
+<DD><A NAME="IDX135"></A>
Similar to <CODE>complete</CODE>, but replaces the word to be completed
with a single match from the list of possible completions.
Repeated execution of <CODE>menu-complete</CODE> steps through the list
@@ -1704,9 +1722,9 @@ This command is intended to be bound to <KBD>TAB</KBD>, but is unbound
by default.
<P>
-<A NAME="IDX135"></A>
+<A NAME="IDX136"></A>
<DT><CODE>delete-char-or-list ()</CODE>
-<DD><A NAME="IDX136"></A>
+<DD><A NAME="IDX137"></A>
Deletes the character under the cursor if not at the beginning or
end of the line (like <CODE>delete-char</CODE>).
If at the end of the line, behaves identically to
@@ -1735,22 +1753,22 @@ This command is unbound by default.
<!--docid::SEC20::-->
<DL COMPACT>
-<A NAME="IDX137"></A>
+<A NAME="IDX138"></A>
<DT><CODE>start-kbd-macro (C-x ()</CODE>
-<DD><A NAME="IDX138"></A>
+<DD><A NAME="IDX139"></A>
Begin saving the characters typed into the current keyboard macro.
<P>
-<A NAME="IDX139"></A>
+<A NAME="IDX140"></A>
<DT><CODE>end-kbd-macro (C-x ))</CODE>
-<DD><A NAME="IDX140"></A>
+<DD><A NAME="IDX141"></A>
Stop saving the characters typed into the current keyboard macro
and save the definition.
<P>
-<A NAME="IDX141"></A>
+<A NAME="IDX142"></A>
<DT><CODE>call-last-kbd-macro (C-x e)</CODE>
-<DD><A NAME="IDX142"></A>
+<DD><A NAME="IDX143"></A>
Re-execute the last keyboard macro defined, by making the characters
in the macro appear as if typed at the keyboard.
<P>
@@ -1776,87 +1794,87 @@ in the macro appear as if typed at the keyboard.
<!--docid::SEC21::-->
<DL COMPACT>
-<A NAME="IDX143"></A>
+<A NAME="IDX144"></A>
<DT><CODE>re-read-init-file (C-x C-r)</CODE>
-<DD><A NAME="IDX144"></A>
+<DD><A NAME="IDX145"></A>
Read in the contents of the <VAR>inputrc</VAR> file, and incorporate
any bindings or variable assignments found there.
<P>
-<A NAME="IDX145"></A>
+<A NAME="IDX146"></A>
<DT><CODE>abort (C-g)</CODE>
-<DD><A NAME="IDX146"></A>
+<DD><A NAME="IDX147"></A>
Abort the current editing command and
ring the terminal's bell (subject to the setting of
<CODE>bell-style</CODE>).
<P>
-<A NAME="IDX147"></A>
+<A NAME="IDX148"></A>
<DT><CODE>do-uppercase-version (M-a, M-b, M-<VAR>x</VAR>, <small>...</small>)</CODE>
-<DD><A NAME="IDX148"></A>
+<DD><A NAME="IDX149"></A>
If the metafied character <VAR>x</VAR> is lowercase, run the command
that is bound to the corresponding uppercase character.
<P>
-<A NAME="IDX149"></A>
+<A NAME="IDX150"></A>
<DT><CODE>prefix-meta (<KBD>ESC</KBD>)</CODE>
-<DD><A NAME="IDX150"></A>
+<DD><A NAME="IDX151"></A>
Metafy the next character typed. This is for keyboards
without a meta key. Typing <SAMP>`<KBD>ESC</KBD> f'</SAMP> is equivalent to typing
<KBD>M-f</KBD>.
<P>
-<A NAME="IDX151"></A>
+<A NAME="IDX152"></A>
<DT><CODE>undo (C-_ or C-x C-u)</CODE>
-<DD><A NAME="IDX152"></A>
+<DD><A NAME="IDX153"></A>
Incremental undo, separately remembered for each line.
<P>
-<A NAME="IDX153"></A>
+<A NAME="IDX154"></A>
<DT><CODE>revert-line (M-r)</CODE>
-<DD><A NAME="IDX154"></A>
+<DD><A NAME="IDX155"></A>
Undo all changes made to this line. This is like executing the <CODE>undo</CODE>
command enough times to get back to the beginning.
<P>
-<A NAME="IDX155"></A>
+<A NAME="IDX156"></A>
<DT><CODE>tilde-expand (M-~)</CODE>
-<DD><A NAME="IDX156"></A>
+<DD><A NAME="IDX157"></A>
Perform tilde expansion on the current word.
<P>
-<A NAME="IDX157"></A>
+<A NAME="IDX158"></A>
<DT><CODE>set-mark (C-@)</CODE>
-<DD><A NAME="IDX158"></A>
+<DD><A NAME="IDX159"></A>
Set the mark to the point. If a
numeric argument is supplied, the mark is set to that position.
<P>
-<A NAME="IDX159"></A>
+<A NAME="IDX160"></A>
<DT><CODE>exchange-point-and-mark (C-x C-x)</CODE>
-<DD><A NAME="IDX160"></A>
+<DD><A NAME="IDX161"></A>
Swap the point with the mark. The current cursor position is set to
the saved position, and the old cursor position is saved as the mark.
<P>
-<A NAME="IDX161"></A>
+<A NAME="IDX162"></A>
<DT><CODE>character-search (C-])</CODE>
-<DD><A NAME="IDX162"></A>
+<DD><A NAME="IDX163"></A>
A character is read and point is moved to the next occurrence of that
character. A negative count searches for previous occurrences.
<P>
-<A NAME="IDX163"></A>
+<A NAME="IDX164"></A>
<DT><CODE>character-search-backward (M-C-])</CODE>
-<DD><A NAME="IDX164"></A>
+<DD><A NAME="IDX165"></A>
A character is read and point is moved to the previous occurrence
of that character. A negative count searches for subsequent
occurrences.
<P>
-<A NAME="IDX165"></A>
+<A NAME="IDX166"></A>
<DT><CODE>insert-comment (M-#)</CODE>
-<DD><A NAME="IDX166"></A>
+<DD><A NAME="IDX167"></A>
Without a numeric argument, the value of the <CODE>comment-begin</CODE>
variable is inserted at the beginning of the current line.
If a numeric argument is supplied, this command acts as a toggle: if
@@ -1867,43 +1885,43 @@ the line.
In either case, the line is accepted as if a newline had been typed.
<P>
-<A NAME="IDX167"></A>
+<A NAME="IDX168"></A>
<DT><CODE>dump-functions ()</CODE>
-<DD><A NAME="IDX168"></A>
+<DD><A NAME="IDX169"></A>
Print all of the functions and their key bindings to the
Readline output stream. If a numeric argument is supplied,
the output is formatted in such a way that it can be made part
of an <VAR>inputrc</VAR> file. This command is unbound by default.
<P>
-<A NAME="IDX169"></A>
+<A NAME="IDX170"></A>
<DT><CODE>dump-variables ()</CODE>
-<DD><A NAME="IDX170"></A>
+<DD><A NAME="IDX171"></A>
Print all of the settable variables and their values to the
Readline output stream. If a numeric argument is supplied,
the output is formatted in such a way that it can be made part
of an <VAR>inputrc</VAR> file. This command is unbound by default.
<P>
-<A NAME="IDX171"></A>
+<A NAME="IDX172"></A>
<DT><CODE>dump-macros ()</CODE>
-<DD><A NAME="IDX172"></A>
+<DD><A NAME="IDX173"></A>
Print all of the Readline key sequences bound to macros and the
strings they output. If a numeric argument is supplied,
the output is formatted in such a way that it can be made part
of an <VAR>inputrc</VAR> file. This command is unbound by default.
<P>
-<A NAME="IDX173"></A>
+<A NAME="IDX174"></A>
<DT><CODE>emacs-editing-mode (C-e)</CODE>
-<DD><A NAME="IDX174"></A>
+<DD><A NAME="IDX175"></A>
When in <CODE>vi</CODE> command mode, this causes a switch to <CODE>emacs</CODE>
editing mode.
<P>
-<A NAME="IDX175"></A>
+<A NAME="IDX176"></A>
<DT><CODE>vi-editing-mode (M-C-j)</CODE>
-<DD><A NAME="IDX176"></A>
+<DD><A NAME="IDX177"></A>
When in <CODE>emacs</CODE> editing mode, this causes a switch to <CODE>vi</CODE>
editing mode.
<P>
@@ -1990,7 +2008,7 @@ so forth.
<!--docid::SEC24::-->
<P>
-<A NAME="IDX177"></A>
+<A NAME="IDX178"></A>
<center>
Version 1.2, November 2002
</center>
@@ -2608,7 +2626,7 @@ to permit their use in free software.
<TD VALIGN="MIDDLE" ALIGN="LEFT">[<A HREF="rluserman.html#SEC_About"> ? </A>]</TD>
</TR></TABLE>
<H1>About this document</H1>
-This document was generated by <I>Chet Ramey</I> on <I>July, 27 2004</I>
+This document was generated by <I>Chet Ramey</I> on <I>December, 6 2005</I>
using <A HREF="http://www.mathematik.uni-kl.de/~obachman/Texi2html
"><I>texi2html</I></A>
<P></P>
@@ -2770,7 +2788,7 @@ the following structure:
<BR>
<FONT SIZE="-1">
This document was generated
-by <I>Chet Ramey</I> on <I>July, 27 2004</I>
+by <I>Chet Ramey</I> on <I>December, 6 2005</I>
using <A HREF="http://www.mathematik.uni-kl.de/~obachman/Texi2html
"><I>texi2html</I></A>
View Lorry Controller Status