diff options
Diffstat (limited to 'chromium/third_party/sqlite/sqlite-src-3240000/autoconf/tea/win/makefile.vc')
| -rw-r--r-- | chromium/third_party/sqlite/sqlite-src-3240000/autoconf/tea/win/makefile.vc | 414 |
1 files changed, 0 insertions, 414 deletions
diff --git a/chromium/third_party/sqlite/sqlite-src-3240000/autoconf/tea/win/makefile.vc b/chromium/third_party/sqlite/sqlite-src-3240000/autoconf/tea/win/makefile.vc deleted file mode 100644 index a5e46277072..00000000000 --- a/chromium/third_party/sqlite/sqlite-src-3240000/autoconf/tea/win/makefile.vc +++ /dev/null @@ -1,414 +0,0 @@ -# makefile.vc -- -*- Makefile -*- -# -# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) -# -# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to -# make it suitable as a general package makefile. Look for the word EDIT -# which marks sections that may need modification. As a minumum you will -# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values -# relevant to your package. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. -# -# Copyright (c) 1995-1996 Sun Microsystems, Inc. -# Copyright (c) 1998-2000 Ajuba Solutions. -# Copyright (c) 2001 ActiveState Corporation. -# Copyright (c) 2001-2002 David Gravereaux. -# Copyright (c) 2003 Pat Thoyts -# -#------------------------------------------------------------------------- -# RCS: @(#)$Id: makefile.vc,v 1.4 2004/07/26 08:22:05 patthoyts Exp $ -#------------------------------------------------------------------------- - -!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR) -MSG = ^ -You will need to run vcvars32.bat from Developer Studio, first, to setup^ -the environment. Jump to this line to read the new instructions. -!error $(MSG) -!endif - -#------------------------------------------------------------------------------ -# HOW TO USE this makefile: -# -# 1) It is now necessary to have %MSVCDir% set in the environment. This is -# used as a check to see if vcvars32.bat had been run prior to running -# nmake or during the installation of Microsoft Visual C++, MSVCDir had -# been set globally and the PATH adjusted. Either way is valid. -# -# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin -# directory to setup the proper environment, if needed, for your current -# setup. This is a needed bootstrap requirement and allows the swapping of -# different environments to be easier. -# -# 2) To use the Platform SDK (not expressly needed), run setenv.bat after -# vcvars32.bat according to the instructions for it. This can also turn on -# the 64-bit compiler, if your SDK has it. -# -# 3) Targets are: -# all -- Builds everything. -# <project> -- Builds the project (eg: nmake sample) -# test -- Builds and runs the test suite. -# install -- Installs the built binaries and libraries to $(INSTALLDIR) -# in an appropriate subdirectory. -# clean/realclean/distclean -- varying levels of cleaning. -# -# 4) Macros usable on the commandline: -# INSTALLDIR=<path> -# Sets where to install Tcl from the built binaries. -# C:\Progra~1\Tcl is assumed when not specified. -# -# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none -# Sets special options for the core. The default is for none. -# Any combination of the above may be used (comma separated). -# 'none' will over-ride everything to nothing. -# -# static = Builds a static library of the core instead of a -# dll. The shell will be static (and large), as well. -# msvcrt = Effects the static option only to switch it from -# using libcmt(d) as the C runtime [by default] to -# msvcrt(d). This is useful for static embedding -# support. -# staticpkg = Effects the static option only to switch -# tclshXX.exe to have the dde and reg extension linked -# inside it. -# threads = Turns on full multithreading support. -# thrdalloc = Use the thread allocator (shared global free pool). -# symbols = Adds symbols for step debugging. -# profile = Adds profiling hooks. Map file is assumed. -# loimpact = Adds a flag for how NT treats the heap to keep memory -# in use, low. This is said to impact alloc performance. -# -# STATS=memdbg,compdbg,none -# Sets optional memory and bytecode compiler debugging code added -# to the core. The default is for none. Any combination of the -# above may be used (comma separated). 'none' will over-ride -# everything to nothing. -# -# memdbg = Enables the debugging memory allocator. -# compdbg = Enables byte compilation logging. -# -# MACHINE=(IX86|IA64|ALPHA) -# Set the machine type used for the compiler, linker, and -# resource compiler. This hook is needed to tell the tools -# when alternate platforms are requested. IX86 is the default -# when not specified. -# -# TMP_DIR=<path> -# OUT_DIR=<path> -# Hooks to allow the intermediate and output directories to be -# changed. $(OUT_DIR) is assumed to be -# $(BINROOT)\(Release|Debug) based on if symbols are requested. -# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default. -# -# TESTPAT=<file> -# Reads the tests requested to be run from this file. -# -# CFG_ENCODING=encoding -# name of encoding for configuration information. Defaults -# to cp1252 -# -# 5) Examples: -# -# Basic syntax of calling nmake looks like this: -# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]] -# -# Standard (no frills) -# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat -# Setting environment for using Microsoft Visual C++ tools. -# c:\tcl_src\win\>nmake -f makefile.vc all -# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl -# -# Building for Win64 -# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat -# Setting environment for using Microsoft Visual C++ tools. -# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL -# Targeting Windows pre64 RETAIL -# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64 -# -#------------------------------------------------------------------------------ -#============================================================================== -############################################################################### -#------------------------------------------------------------------------------ - -!if !exist("makefile.vc") -MSG = ^ -You must run this makefile only from the directory it is in.^ -Please `cd` to its location first. -!error $(MSG) -!endif - -#------------------------------------------------------------------------- -# Project specific information (EDIT) -# -# You should edit this with the name and version of your project. This -# information is used to generate the name of the package library and -# it's install location. -# -# For example, the sample extension is going to build sample04.dll and -# would install it into $(INSTALLDIR)\lib\sample04 -# -# You need to specify the object files that need to be linked into your -# binary here. -# -#------------------------------------------------------------------------- - -PROJECT = sqlite3 -!include "rules.vc" - -# nmakehelp -V <file> <tag> will search the file for tag, skips until a -# number and returns all character until a character not in [0-9.ab] -# is read. - -!if [echo REM = This file is generated from Makefile.vc > versions.vc] -!endif -# get project version from row "AC_INIT([sqlite], [3.7.14])" -!if [echo DOTVERSION = \>> versions.vc] \ - && [nmakehlp -V ..\configure.in AC_INIT >> versions.vc] -!endif -!include "versions.vc" - -VERSION = $(DOTVERSION:.=) -STUBPREFIX = $(PROJECT)stub - -DLLOBJS = \ - $(TMP_DIR)\tclsqlite3.obj - -#------------------------------------------------------------------------- -# Target names and paths ( shouldn't need changing ) -#------------------------------------------------------------------------- - -BINROOT = . -ROOT = .. - -PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib -PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) -PRJLIB = $(OUT_DIR)\$(PRJLIBNAME) - -PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib -PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME) - -### Make sure we use backslash only. -PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION) -LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR) -BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR) -DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR) -SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR) -INCLUDE_INSTALL_DIR = $(_TCLDIR)\include - -### The following paths CANNOT have spaces in them. -GENERICDIR = $(ROOT)\generic -WINDIR = $(ROOT)\win -LIBDIR = $(ROOT)\library -DOCDIR = $(ROOT)\doc -TOOLSDIR = $(ROOT)\tools -COMPATDIR = $(ROOT)\compat - -#--------------------------------------------------------------------- -# Compile flags -#--------------------------------------------------------------------- - -!if !$(DEBUG) -!if $(OPTIMIZING) -### This cranks the optimization level to maximize speed -cdebug = -O2 -Op -Gs -!else -cdebug = -!endif -!else if "$(MACHINE)" == "IA64" -### Warnings are too many, can't support warnings into errors. -cdebug = -Z7 -Od -GZ -!else -cdebug = -Z7 -WX -Od -GZ -!endif - -### Declarations common to all compiler options -cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\ - -!if $(MSVCRT) -!if $(DEBUG) -crt = -MDd -!else -crt = -MD -!endif -!else -!if $(DEBUG) -crt = -MTd -!else -crt = -MT -!endif -!endif - -INCLUDES = $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)" \ - -I"$(ROOT)\.." -BASE_CLFAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES) \ - -DSQLITE_3_SUFFIX_ONLY=1 -DSQLITE_ENABLE_RTREE=1 \ - -DSQLITE_ENABLE_FTS3=1 -DSQLITE_OMIT_DEPRECATED=1 -CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE -DSQLITE_ENABLE_FTS3=1 -TCL_CFLAGS = -DBUILD_sqlite -DUSE_TCL_STUBS \ - -DPACKAGE_VERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) \ - $(OPTDEFINES) - -#--------------------------------------------------------------------- -# Link flags -#--------------------------------------------------------------------- - -!if $(DEBUG) -ldebug = -debug:full -debugtype:cv -!else -ldebug = -release -opt:ref -opt:icf,3 -!endif - -### Declarations common to all linker options -lflags = -nologo -machine:$(MACHINE) $(ldebug) - -!if $(PROFILE) -lflags = $(lflags) -profile -!endif - -!if $(ALIGN98_HACK) && !$(STATIC_BUILD) -### Align sections for PE size savings. -lflags = $(lflags) -opt:nowin98 -!else if !$(ALIGN98_HACK) && $(STATIC_BUILD) -### Align sections for speed in loading by choosing the virtual page size. -lflags = $(lflags) -align:4096 -!endif - -!if $(LOIMPACT) -lflags = $(lflags) -ws:aggressive -!endif - -dlllflags = $(lflags) -dll -conlflags = $(lflags) -subsystem:console -guilflags = $(lflags) -subsystem:windows -baselibs = $(TCLSTUBLIB) - -#--------------------------------------------------------------------- -# TclTest flags -#--------------------------------------------------------------------- - -!IF "$(TESTPAT)" != "" -TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) -!ENDIF - -#--------------------------------------------------------------------- -# Project specific targets (EDIT) -#--------------------------------------------------------------------- - -all: setup $(PROJECT) -$(PROJECT): setup $(PRJLIB) -install: install-binaries install-libraries install-docs - -# Tests need to ensure we load the right dll file we -# have to handle the output differently on Win9x. -# -!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" -test: setup $(PROJECT) - set TCL_LIBRARY=$(ROOT)/library - $(TCLSH) << -load $(PRJLIB:\=/) -cd "$(ROOT)/tests" -set argv "$(TESTFLAGS)" -source all.tcl -<< -!else -test: setup $(PROJECT) - echo Please wait while the test results are collected - set TCL_LIBRARY=$(ROOT)/library - $(TCLSH) << >tests.log -load $(PRJLIB:\=/) -cd "$(ROOT)/tests" -set argv "$(TESTFLAGS)" -source all.tcl -<< - type tests.log | more -!endif - -setup: - @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) - @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) - -$(PRJLIB): $(DLLOBJS) - $(link32) $(dlllflags) -out:$@ $(baselibs) @<< -$** -<< - -@del $*.exp - -$(PRJSTUBLIB): $(PRJSTUBOBJS) - $(lib32) -nologo -out:$@ $(PRJSTUBOBJS) - -#--------------------------------------------------------------------- -# Implicit rules -#--------------------------------------------------------------------- - -{$(WINDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< -$< -<< - -{$(GENERICDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< -$< -<< - -{$(COMPATDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< -$< -<< - -{$(WINDIR)}.rc{$(TMP_DIR)}.res: - $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \ -!if $(DEBUG) - -d DEBUG \ -!endif -!if $(TCL_THREADS) - -d TCL_THREADS \ -!endif -!if $(STATIC_BUILD) - -d STATIC_BUILD \ -!endif - $< - -.SUFFIXES: -.SUFFIXES:.c .rc - -#--------------------------------------------------------------------- -# Installation. (EDIT) -# -# You may need to modify this section to reflect the final distribution -# of your files and possibly to generate documentation. -# -#--------------------------------------------------------------------- - -install-binaries: - @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)' - @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)" - @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL - -install-libraries: - @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)' - @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)" - @echo Installing package index in '$(SCRIPT_INSTALL_DIR)' - @type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl" -package ifneeded $(PROJECT) $(DOTVERSION) \ - [list load [file join $$dir $(PRJLIBNAME)] sqlite3] -<< - -install-docs: - @echo Installing documentation files to '$(DOC_INSTALL_DIR)' - @if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)" - -#--------------------------------------------------------------------- -# Clean up -#--------------------------------------------------------------------- - -clean: - @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) - @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc - -realclean: clean - @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) - -distclean: realclean - @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe - @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj |