diff options
Diffstat (limited to 'chromium/third_party/sqlite/patched/src/update.c')
-rw-r--r-- | chromium/third_party/sqlite/patched/src/update.c | 111 |
1 files changed, 92 insertions, 19 deletions
diff --git a/chromium/third_party/sqlite/patched/src/update.c b/chromium/third_party/sqlite/patched/src/update.c index 44407bdf6fd..bf36f2fcac2 100644 --- a/chromium/third_party/sqlite/patched/src/update.c +++ b/chromium/third_party/sqlite/patched/src/update.c @@ -147,7 +147,7 @@ void sqlite3Update( Expr *pLimit, /* LIMIT clause. May be null */ Upsert *pUpsert /* ON CONFLICT clause, or null */ ){ - int i, j; /* Loop counters */ + int i, j, k; /* Loop counters */ Table *pTab; /* The table to be updated */ int addrTop = 0; /* VDBE instruction address of the start of the loop */ WhereInfo *pWInfo; /* Information about the WHERE clause */ @@ -191,6 +191,7 @@ void sqlite3Update( int iPk = 0; /* First of nPk cells holding PRIMARY KEY value */ i16 nPk = 0; /* Number of components of the PRIMARY KEY */ int bReplace = 0; /* True if REPLACE conflict resolution might happen */ + int bFinishSeek = 1; /* The OP_FinishSeek opcode is needed */ /* Register Allocations */ int regRowCount = 0; /* A count of rows changed */ @@ -289,6 +290,10 @@ void sqlite3Update( sNC.uNC.pUpsert = pUpsert; sNC.ncFlags = NC_UUpsert; + /* Begin generating code. */ + v = sqlite3GetVdbe(pParse); + if( v==0 ) goto update_cleanup; + /* Resolve the column names in all the expressions of the ** of the UPDATE statement. Also find the column index ** for each column to be updated in the pChanges array. For each @@ -301,24 +306,34 @@ void sqlite3Update( goto update_cleanup; } for(j=0; j<pTab->nCol; j++){ - if( sqlite3StrICmp(pTab->aCol[j].zName, pChanges->a[i].zName)==0 ){ + if( sqlite3StrICmp(pTab->aCol[j].zName, pChanges->a[i].zEName)==0 ){ if( j==pTab->iPKey ){ chngRowid = 1; pRowidExpr = pChanges->a[i].pExpr; }else if( pPk && (pTab->aCol[j].colFlags & COLFLAG_PRIMKEY)!=0 ){ chngPk = 1; } +#ifndef SQLITE_OMIT_GENERATED_COLUMNS + else if( pTab->aCol[j].colFlags & COLFLAG_GENERATED ){ + testcase( pTab->aCol[j].colFlags & COLFLAG_VIRTUAL ); + testcase( pTab->aCol[j].colFlags & COLFLAG_STORED ); + sqlite3ErrorMsg(pParse, + "cannot UPDATE generated column \"%s\"", + pTab->aCol[j].zName); + goto update_cleanup; + } +#endif aXRef[j] = i; break; } } if( j>=pTab->nCol ){ - if( pPk==0 && sqlite3IsRowid(pChanges->a[i].zName) ){ + if( pPk==0 && sqlite3IsRowid(pChanges->a[i].zEName) ){ j = -1; chngRowid = 1; pRowidExpr = pChanges->a[i].pExpr; }else{ - sqlite3ErrorMsg(pParse, "no such column: %s", pChanges->a[i].zName); + sqlite3ErrorMsg(pParse, "no such column: %s", pChanges->a[i].zEName); pParse->checkSchema = 1; goto update_cleanup; } @@ -342,6 +357,33 @@ void sqlite3Update( assert( chngPk==0 || chngPk==1 ); chngKey = chngRowid + chngPk; +#ifndef SQLITE_OMIT_GENERATED_COLUMNS + /* Mark generated columns as changing if their generator expressions + ** reference any changing column. The actual aXRef[] value for + ** generated expressions is not used, other than to check to see that it + ** is non-negative, so the value of aXRef[] for generated columns can be + ** set to any non-negative number. We use 99999 so that the value is + ** obvious when looking at aXRef[] in a symbolic debugger. + */ + if( pTab->tabFlags & TF_HasGenerated ){ + int bProgress; + testcase( pTab->tabFlags & TF_HasVirtual ); + testcase( pTab->tabFlags & TF_HasStored ); + do{ + bProgress = 0; + for(i=0; i<pTab->nCol; i++){ + if( aXRef[i]>=0 ) continue; + if( (pTab->aCol[i].colFlags & COLFLAG_GENERATED)==0 ) continue; + if( sqlite3ExprReferencesUpdatedColumn(pTab->aCol[i].pDflt, + aXRef, chngRowid) ){ + aXRef[i] = 99999; + bProgress = 1; + } + } + }while( bProgress ); + } +#endif + /* The SET expressions are not actually used inside the WHERE loop. ** So reset the colUsed mask. Unless this is a virtual table. In that ** case, set all bits of the colUsed mask (to ensure that the virtual @@ -386,9 +428,6 @@ void sqlite3Update( memset(aToOpen, 1, nIdx+1); } - /* Begin generating code. */ - v = sqlite3GetVdbe(pParse); - if( v==0 ) goto update_cleanup; if( pParse->nested==0 ) sqlite3VdbeCountChanges(v); sqlite3BeginWriteOperation(pParse, pTrigger || hasFK, iDb); @@ -486,6 +525,7 @@ void sqlite3Update( pWInfo = 0; eOnePass = ONEPASS_SINGLE; sqlite3ExprIfFalse(pParse, pWhere, labelBreak, SQLITE_JUMPIFNULL); + bFinishSeek = 0; }else{ /* Begin the database scan. ** @@ -512,6 +552,7 @@ void sqlite3Update( ** strategy that uses an index for which one or more columns are being ** updated. */ eOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass); + bFinishSeek = sqlite3WhereUsesDeferredSeek(pWInfo); if( eOnePass!=ONEPASS_SINGLE ){ sqlite3MultiWrite(pParse); if( eOnePass==ONEPASS_MULTI ){ @@ -542,7 +583,8 @@ void sqlite3Update( ** is not required) and leave the PK fields in the array of registers. */ for(i=0; i<nPk; i++){ assert( pPk->aiColumn[i]>=0 ); - sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur,pPk->aiColumn[i],iPk+i); + sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, + pPk->aiColumn[i], iPk+i); } if( eOnePass ){ if( addrOpen ) sqlite3VdbeChangeToNoop(v, addrOpen); @@ -623,14 +665,16 @@ void sqlite3Update( pTrigger, pChanges, 0, TRIGGER_BEFORE|TRIGGER_AFTER, pTab, onError ); for(i=0; i<pTab->nCol; i++){ + u32 colFlags = pTab->aCol[i].colFlags; + k = sqlite3TableColumnToStorage(pTab, i) + regOld; if( oldmask==0xffffffff || (i<32 && (oldmask & MASKBIT32(i))!=0) - || (pTab->aCol[i].colFlags & COLFLAG_PRIMKEY)!=0 + || (colFlags & COLFLAG_PRIMKEY)!=0 ){ testcase( oldmask!=0xffffffff && i==31 ); - sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regOld+i); + sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, k); }else{ - sqlite3VdbeAddOp2(v, OP_Null, 0, regOld+i); + sqlite3VdbeAddOp2(v, OP_Null, 0, k); } } if( chngRowid==0 && pPk==0 ){ @@ -654,13 +698,15 @@ void sqlite3Update( newmask = sqlite3TriggerColmask( pParse, pTrigger, pChanges, 1, TRIGGER_BEFORE, pTab, onError ); - for(i=0; i<pTab->nCol; i++){ + for(i=0, k=regNew; i<pTab->nCol; i++, k++){ if( i==pTab->iPKey ){ - sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i); + sqlite3VdbeAddOp2(v, OP_Null, 0, k); + }else if( (pTab->aCol[i].colFlags & COLFLAG_GENERATED)!=0 ){ + if( pTab->aCol[i].colFlags & COLFLAG_VIRTUAL ) k--; }else{ j = aXRef[i]; if( j>=0 ){ - sqlite3ExprCode(pParse, pChanges->a[j].pExpr, regNew+i); + sqlite3ExprCode(pParse, pChanges->a[j].pExpr, k); }else if( 0==(tmask&TRIGGER_BEFORE) || i>31 || (newmask & MASKBIT32(i)) ){ /* This branch loads the value of a column that will not be changed ** into a register. This is done if there are no BEFORE triggers, or @@ -669,12 +715,20 @@ void sqlite3Update( */ testcase( i==31 ); testcase( i==32 ); - sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regNew+i); + sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, k); + bFinishSeek = 0; }else{ - sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i); + sqlite3VdbeAddOp2(v, OP_Null, 0, k); } } } +#ifndef SQLITE_OMIT_GENERATED_COLUMNS + if( pTab->tabFlags & TF_HasGenerated ){ + testcase( pTab->tabFlags & TF_HasVirtual ); + testcase( pTab->tabFlags & TF_HasStored ); + sqlite3ComputeGeneratedColumns(pParse, regNew, pTab); + } +#endif /* Fire any BEFORE UPDATE triggers. This happens before constraints are ** verified. One could argue that this is wrong. @@ -707,11 +761,20 @@ void sqlite3Update( ** BEFORE trigger runs. See test case trigger1-18.0 (added 2018-04-26) ** for an example. */ - for(i=0; i<pTab->nCol; i++){ - if( aXRef[i]<0 && i!=pTab->iPKey ){ - sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regNew+i); + for(i=0, k=regNew; i<pTab->nCol; i++, k++){ + if( pTab->aCol[i].colFlags & COLFLAG_GENERATED ){ + if( pTab->aCol[i].colFlags & COLFLAG_VIRTUAL ) k--; + }else if( aXRef[i]<0 && i!=pTab->iPKey ){ + sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, k); } } +#ifndef SQLITE_OMIT_GENERATED_COLUMNS + if( pTab->tabFlags & TF_HasGenerated ){ + testcase( pTab->tabFlags & TF_HasVirtual ); + testcase( pTab->tabFlags & TF_HasStored ); + sqlite3ComputeGeneratedColumns(pParse, regNew, pTab); + } +#endif } if( !isView ){ @@ -741,6 +804,15 @@ void sqlite3Update( /* Delete the index entries associated with the current record. */ sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur, aRegIdx, -1); + /* We must run the OP_FinishSeek opcode to resolve a prior + ** OP_DeferredSeek if there is any possibility that there have been + ** no OP_Column opcodes since the OP_DeferredSeek was issued. But + ** we want to avoid the OP_FinishSeek if possible, as running it + ** costs CPU cycles. */ + if( bFinishSeek ){ + sqlite3VdbeAddOp1(v, OP_FinishSeek, iDataCur); + } + /* If changing the rowid value, or if there are foreign key constraints ** to process, delete the old record. Otherwise, add a noop OP_Delete ** to invoke the pre-update hook. @@ -917,6 +989,7 @@ static void updateVirtualTable( /* Populate the argument registers. */ for(i=0; i<pTab->nCol; i++){ + assert( (pTab->aCol[i].colFlags & COLFLAG_GENERATED)==0 ); if( aXRef[i]>=0 ){ sqlite3ExprCode(pParse, pChanges->a[aXRef[i]].pExpr, regArg+2+i); }else{ |