path: root/src/3rdparty/protocol/ivi-controller.xml

<?xml version="1.0" encoding="UTF-8"?>
<protocol name="ivi_controller">

    <copyright>
    Copyright (C) 2013 DENSO CORPORATION
    Copyright (c) 2013 BMW Car IT GmbH

    Permission is hereby granted, free of charge, to any person obtaining a copy
    of this software and associated documentation files (the "Software"), to deal
    in the Software without restriction, including without limitation the rights
    to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
    copies of the Software, and to permit persons to whom the Software is
    furnished to do so, subject to the following conditions:

    The above copyright notice and this permission notice shall be included in
    all copies or substantial portions of the Software.

    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
    AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
    OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
    THE SOFTWARE.
    </copyright>

    <interface name="ivi_controller_surface" version="1">
        <description summary="controller interface to surface in ivi compositor"/>

        <request name="set_visibility">
            <description summary="set the visibility of a surface in ivi compositor">
                 If visibility argument is 0, the surface in the ivi compositor is set to invisible.
                 If visibility argument is not 0, the surface in the ivi compositor is set to visible.
            </description>
            <arg name="visibility" type="uint"/>
        </request>

        <request name="set_opacity">
            <description summary="set the opacity of a surface in ivi compositor">
                 The valid range for opacity is 0.0 (fully transparent) to 1.0 (fully opaque).
            </description>
            <arg name="opacity" type="fixed"/>
        </request>

        <request name="set_source_rectangle">
            <description summary="set the scanout area of a surface in ivi compositor">
                The source rectangle defines the part of the surface content, that is used for
                compositing the surface. It can be used, if valid content of the surface is smaller
                than the surface. Effectively it can be used to zoom the content of the surface.
                x:      horizontal start position of scanout area within the surface
                y:      vertical start position of scanout area within the surface
                width:  width of scanout area within the surface
                height: height of scanout area within the surface
            </description>
            <arg name="x" type="int"/>
            <arg name="y" type="int"/>
            <arg name="width" type="int"/>
            <arg name="height" type="int"/>
        </request>

        <request name="set_destination_rectangle">
            <description summary="Set the destination area of a surface within a layer">
                The destination rectangle defines the position and size of a surface on a layer.
                The surface will be scaled to this rectangle for rendering.
                x:      horizontal start position of surface within the layer
                y:      vertical start position of surface within the layer
                width : width of surface within the layer
                height: height of surface within the layer
            </description>
            <arg name="x" type="int"/>
            <arg name="y" type="int"/>
            <arg name="width" type="int"/>
            <arg name="height" type="int"/>
        </request>

        <request name="set_configuration">
            <description summary="request new buffer size for application content">
                Request the client providing content for this surface, to resize of the buffers
                provided as surface content.
            </description>
            <arg name="width" type="int"/>
            <arg name="height" type="int"/>
        </request>

        <request name="set_orientation">
            <description summary="set the orientation of a surface in ivi compositor">
                The orientation of a surface in ivi compositor can be rotated in 90 degree steps,
                as defined in orientation enum.
            </description>
            <arg name="orientation" type="int"/>
        </request>

        <request name="screenshot">
            <description summary="take screenshot of surface">
                Store a screenshot of the surface content in the file provided by argument filename.
            </description>
            <arg name="filename" type="string"/>
        </request>

        <event name="visibility">
            <description summary="the visibility of the surface in ivi compositor has changed">
                The new visibility state is provided in argument visibility.
                If visibility is 0, the surface has become invisible.
                If visibility is not 0, the surface has become visible.
            </description>
            <arg name="visibility" type="int"/>
        </event>

        <event name="opacity">
            <description summary="the opacity of surface in ivi compositor has changed">
                The new opacity state is provided in argument opacity.
                The valid range for opactiy is 0.0 (fully transparent) to 1.0 (fully opaque).
            </description>
            <arg name="opacity" type="fixed"/>
        </event>

        <event name="source_rectangle">
            <description summary="the source rectangle of surface in ivi compositor has changed">
                The scanout region of the surface content has changed.
                The new values for source rectangle are provided by
                x:      new horizontal start position of scanout area within the surface
                y:      new vertical start position of scanout area within the surface
                width:  new width of scanout area within the surface
                height: new height of scanout area within the surface
            </description>
            <arg name="x" type="int"/>
            <arg name="y" type="int"/>
            <arg name="width" type="int"/>
            <arg name="height" type="int"/>
        </event>

        <event name="destination_rectangle">
            <description summary="the destination rectangle of surface in ivi compositor has changed">
                The new values for source rectangle are provided by
                x:      new horizontal start position of surface within the layer
                y:      new vertical start position of surface within the layer
                width : new width of surface within the layer
                height: new height of surface within the layer
            </description>
            <arg name="x" type="int"/>
            <arg name="y" type="int"/>
            <arg name="width" type="int"/>
            <arg name="height" type="int"/>
        </event>

        <event name="configuration">
            <description summary="the configuration of surface in ivi compositor has changed">
                The client providing content for this surface was requested to resize the buffer
                provided as surface content. The requested buffer size is provided by arguments
                width and height.
            </description>
            <arg name="width" type="int"/>
            <arg name="height" type="int"/>
        </event>

        <enum name="orientation">
            <description summary="orientation presets in degrees">
                The surfaces in ivi controller can be rotated in 90 degrees steps.
                This enum defines all valid orientations for surfaces.
            </description>
            <entry name="0_degrees"   value="0" summary="not rotated"/>
            <entry name="90_degrees"  value="1" summary="rotated 90 degrees clockwise"/>
            <entry name="180_degrees" value="2" summary="rotated 180 degrees clockwise"/>
            <entry name="270_degrees" value="3" summary="rotated 270 degrees clockwise"/>
        </enum>

        <event name="orientation">
            <description summary="the orientation of surface in ivi compositor has changed">
                The new orientation status is provided by argument orientation.
            </description>
            <arg name="orientation" type="int"/>
        </event>

        <enum name="pixelformat">
            <description summary="pixel format values">
                Applications can provide buffers as surface content with differernt buffer
                properties. This enum defines all supported buffer configurations.
            </description>
            <entry name="r_8"       value="0" summary="8 bit luminance surface"/>
            <entry name="rgb_888"   value="1" summary="24 bit rgb surface"/>
            <entry name="rgba_8888" value="2" summary="24 bit rgb surface with 8 bit alpha"/>
            <entry name="rgb_565"   value="3" summary="16 bit rgb surface"/>
            <entry name="rgba_5551" value="4" summary="16 bit rgb surface with binary mask"/>
            <entry name="rgba_6661" value="5" summary="18 bit rgb surface with binary mask"/>
            <entry name="rgba_4444" value="6" summary="12 bit rgb surface with 4 bit alpha"/>
            <entry name="unknown"   value="7" summary="unknown"/>
        </enum>

        <event name="pixelformat">
            <description summary="pixelformat for surface in ivi compositor has changed">
                When client attach buffers as surface content, these buffers have a pixelformat
                configuration. If the pixelformat of a newly attached buffer is different from
                the previous buffer configuration, this event is raised.
                This is also done, when the first buffer is provided by application.
            </description>
            <arg name="pixelformat" type="int"/>
        </event>

        <event name="layer">
            <description summary="surface in ivi compositor was added to a layer">
                This surface was added to the render order of the layer defined by argument layer.
                This is essential for a surface to become visible on screen, since ivi compositors
                will only render layers (or more precise all surfaces in the render order of a layer).
            </description>
            <arg name="layer" type="object" interface="ivi_controller_layer" allow-null="true"/>
        </event>

        <request name="send_stats">
            <description summary="request statistics for surface in ivi compositor">
                These stats contain information required for monitoring, debugging, logging
                and tracing.
            </description>
        </request>

        <event name="stats">
            <description summary="receive updated statistics for surface in ivi compositor">
                The information contained in this event is essential for monitoring, debugging,
                logging and tracing support in IVI systems.
            </description>
            <arg name="redraw_count" type="uint"/>
            <arg name="frame_count" type="uint"/>
            <arg name="update_count" type="uint"/>
            <arg name="pid" type="uint"/>
            <arg name="process_name" type="string" allow-null="true"/>
        </event>

        <request name="destroy" type="destructor">
            <description summary="destroy ivi_controller_surface">
                Request to destroy the ivi_controller_surface. If argument
                destroy_scene_object id not 0, the surface will be destroyed in
                ivi compositor. If argument is 0, only the proxy object is destroyed.
            </description>
            <arg name="destroy_scene_object" type="int"/>
        </request>

        <event name="destroyed">
            <description summary="ivi_controller_surface was destroyed"/>
        </event>

        <enum name="content_state">
            <description summary="all possible states of content for a surface">
                This enum defines all possible content states of a surface. This is
                required, since surfaces in ivi compositor can exist without applications
                providing content for them.
            </description>
            <entry name="content_available" value="1"
                   summary="application provided wl_surface for this surface"/>
            <entry name="content_removed" value="2"
                   summary="wl_surface was removed for this surface"/>
        </enum>

        <event name="content">
            <description summary="content state for surface has changed">
                Surfaces in ivi compositor can exist without any application or controller
                referencing it. All surfaces initially have no content. This event indicates
                when content state has changed. All possible content states are defined
                in enum content_state.
            </description>
            <arg name="content_state" type="int"/>
        </event>

    </interface>

    <interface name="ivi_controller_layer" version="1">
        <description summary="controller interface to layer in ivi compositor"/>

        <request name="set_visibility">
            <description summary="set visibility of layer in ivi compositor">
                If visibility argument is 0, the layer in the ivi compositor is set to invisible.
                If visibility argument is not 0, the layer in the ivi compositor is set to visible.
            </description>
            <arg name="visibility" type="uint"/>
        </request>

        <request name="set_opacity">
            <description summary="set opacity of layer in ivi compositor">
                The valid range for opacity is 0.0 (fully transparent) to 1.0 (fully opaque).
            </description>
            <arg name="opacity" type="fixed"/>
        </request>

        <request name="set_source_rectangle">
            <description summary="set the scanout area of a layer in ivi compositor">
                The source rectangle defines the part of the layer content, that is used for
                compositing the screen. It can be used, if valid content of the layer is smaller
                than the layer. Effectively it can be used to zoom the content of the layer.
                x:      horizontal start position of scanout area within the layer
                y:      vertical start position of scanout area within the layer
                width:  width of scanout area within the layer
                height: height of scanout area within the layer
            </description>
            <arg name="x" type="int"/>
            <arg name="y" type="int"/>
            <arg name="width" type="int"/>
            <arg name="height" type="int"/>
        </request>

        <request name="set_destination_rectangle">
           <description summary="Set the destination area of a layer within a screen">
                The destination rectangle defines the position and size of a layer on a screen.
                The layer will be scaled to this rectangle for rendering.
                x:      horizontal start position of layer within the screen
                y:      vertical start position of layer within the screen
                width : width of surface within the screen
                height: height of surface within the screen
            </description>
            <arg name="x" type="int"/>
            <arg name="y" type="int"/>
            <arg name="width" type="int"/>
            <arg name="height" type="int"/>
        </request>

        <request name="set_configuration">
            <description summary="request new size for layer">
                Layers are created with an initial size, but they can be resized at runtime.
                This request changes the widht and height of a layer.
            </description>
            <arg name="width" type="int"/>
            <arg name="height" type="int"/>
        </request>

        <request name="set_orientation">
            <description summary="set the orientation of a layer in ivi compositor">
                The orientation of a layer in ivi compositor can be rotated in 90 degree steps,
                as defined in orientation enum.
            </description>
            <arg name="orientation" type="int"/>
        </request>

        <request name="screenshot">
            <description summary="take screenshot of layer">
                Store a screenshot of the layer content in the file provided by argument filename.
            </description>
            <arg name="filename" type="string"/>
        </request>

        <request name="clear_surfaces">
            <description summary="remove all surfaces from layer render order">
                A layer has no content assigned to itself, it is a container for surfaces.
                This request removes all surfaces from the layer render order.
                Note: the surfaces are not destroyed, they are just no longer contained by
                the layer.
            </description>
        </request>

        <request name="add_surface">
            <description summary="add a surface to layer render order at nearest z-position">
                A layer has no content assigned to itself, it is a container for surfaces.
                This request adds a surface to the topmost position of the layer render order.
                The added surface will cover all other surfaces of the layer.
            </description>
            <arg name="surface" type="object" interface="ivi_controller_surface"/>
        </request>

        <request name="remove_surface">
            <description summary="remove a surface from layer render order">
                A layer has no content assigned to itself, it is a container for surfaces.
                This request removes one surfaces from the layer render order.
                Note: the surface is not destroyed, it is just no longer contained by
                the layer.
            </description>
            <arg name="surface" type="object" interface="ivi_controller_surface"/>
        </request>

        <request name="set_render_order">
            <description summary="set render order of layer">
                A layer has no content assigned to itself, it is a container for surfaces.
                This request removes all surfaces from the layer render order and set a
                completely new render order.
            </description>
            <arg name="id_surfaces" type="array"/>
        </request>

        <event name="visibility">
            <description summary="the visibility of the layer in ivi compositor has changed">
                The new visibility state is provided in argument visibility.
                If visibility is 0, the layer has become invisible.
                If visibility is not 0, the layer has become visible.
            </description>
            <arg name="visibility" type="int"/>
        </event>

        <event name="opacity">
            <description summary="the opacity of layer in ivi compositor has changed">
                The new opacity state is provided in argument opacity.
                The valid range for opactiy is 0.0 (fully transparent) to 1.0 (fully opaque).
            </description>
            <arg name="opacity" type="fixed"/>
        </event>

        <event name="source_rectangle">
            <description summary="the source rectangle of layer in ivi compositor has changed">
                The scanout region of the layer content has changed.
                The new values for source rectangle are provided by
                x:      new horizontal start position of scanout area within the layer
                y:      new vertical start position of scanout area within the layer
                width:  new width of scanout area within the layer
                height: new height of scanout area within the layer
            </description>
            <arg name="x" type="int"/>
            <arg name="y" type="int"/>
            <arg name="width" type="int"/>
            <arg name="height" type="int"/>
        </event>

        <event name="destination_rectangle">
            <description summary="the destination rectangle of layer in ivi compositor has changed">
                The new values for source rectangle are provided by
                x:      new horizontal start position of layer within the screen
                y:      new vertical start position of layer within the screen
                width : new width of layer within the screen
                height: new height of layer within the screen
            </description>
            <arg name="x" type="int"/>
            <arg name="y" type="int"/>
            <arg name="width" type="int"/>
            <arg name="height" type="int"/>
        </event>

        <event name="configuration">
            <description summary="the configuration of layer in ivi compositor has changed">
                The layer was resized. The new layer size is provided by arguments
                width and height.
            </description>
            <arg name="width" type="int"/>
            <arg name="height" type="int"/>
        </event>

        <event name="orientation">
            <description summary="the orientation of layer in ivi compositor has changed">
                The new orientation status is provided by argument orientation.
            </description>
            <arg name="orientation" type="int"/>
        </event>

        <event name="screen">
            <description summary="layer in ivi compositor was added to a screen">
                This layer was added to the render order of the screen defined by argument screen.
                This is essential for a layer to become visible on screen, since ivi compositors
                will only render screens (or more precise all layers in the render order of a screen).
            </description>
            <arg name="screen" type="object" interface="wl_output" allow-null="true"/>
        </event>

        <request name="destroy" type="destructor">
            <description summary="destroy ivi_controller_layer">
                Request to destroy the ivi_controller_layer. If argument
                destroy_scene_object id not 0, the layer will be destroyed in
                ivi compositor. If argument is 0, only the proxy object is destroyed.
            </description>
            <arg name="destroy_scene_object" type="int"/>
        </request>

        <event name="destroyed">
            <description summary="destroyed layer event"/>
        </event>

    </interface>

    <interface name="ivi_controller_screen" version="1">
        <description summary="controller interface to screen in ivi compositor"/>

        <request name="destroy" type="destructor">
            <description summary="destroy ivi_controller_screen"/>
        </request>

        <request name="clear">
            <description summary="remove all layers from screen render order">
                A screen has no content assigned to itself, it is a container for layers.
                This request removes all layers from the screen render order.
                Note: the layers are not destroyed, they are just no longer contained by
                the screen.
            </description>
        </request>

        <request name="add_layer">
            <description summary="add a layer to screen render order at nearest z-position">
                A screen has no content assigned to itself, it is a container for layers.
                This request adds a layers to the topmost position of the screen render order.
                The added layer will cover all other layers of the screen.
            </description>
            <arg name="layer" type="object" interface="ivi_controller_layer"/>
        </request>

        <request name="screenshot">
            <description summary="take screenshot of screen">
                Store a screenshot of the screen content in the file provided by argument filename.
            </description>
            <arg name="filename" type="string"/>
        </request>

        <request name="set_render_order">
            <description summary="set render order of screen">
                A screen has no content assigned to itself, it is a container for layers.
                This request removes all layers from the screen render order and set a
                completely new render order.
            </description>
            <arg name="id_layers" type="array"/>
        </request>

    </interface>

    <interface name="ivi_controller" version="1">
        <description summary="interface for ivi controllers to use ivi compositor features"/>

        <request name="commit_changes">
            <description summary="commit all changes requested by client">
                All requests are not applied directly to scene object, so a controller
                can set different properties and apply the changes all at once.
                Note: there's an exception to this. Creation and destruction of
                scene objects is executed immediately.
            </description>
        </request>

        <event name="screen">
            <description summary="new screen is available">
                A new screen is announced to the controller. This is typically
                the case in two cases:
                    1. controller was just started, ivi compositor announces existing screen
                    2. a new screen was added to the system at runtime
            </description>
            <arg name="id_screen" type="uint"/>
            <arg name="screen" type="new_id" interface="ivi_controller_screen"/>
        </event>

        <request name="layer_create">
            <description summary="create layer in ivi compositor">
                layer_create will create a new layer with id_layer in ivi compositor,
                if it does not yet exists. If the layer with id_layer already exists in
                ivi compositor, a handle to the existing layer is returned and width and
                height properties are ignored.
            </description>
            <arg name="id_layer" type="uint"/>
            <arg name="width" type="int"/>
            <arg name="height" type="int"/>
            <arg name="id" type="new_id" interface="ivi_controller_layer"/>
        </request>

        <event name="layer">
            <description summary="new layer is available">
                A new layer is announced to the controller.
            </description>
            <arg name="id_layer" type="uint"/>
        </event>

        <request name="surface_create">
            <description summary="create surface in ivi compositor">
                surface_create will create a new surface with id_surface in ivi compositor,
                if it does not yet exists. If the surface with id_surface already exists in
                ivi compositor, a handle to the existing surface is returned.
            </description>
            <arg name="id_surface" type="uint"/>
            <arg name="id" type="new_id" interface="ivi_controller_surface"/>
        </request>

        <event name="surface">
            <description summary="new surface is available">
                A new surface is announced to the controller.
            </description>
            <arg name="id_surface" type="uint"/>
        </event>

        <enum name="object_type">
            <description summary="available object types in ivi compositor scene">
                This enum defines all scene object available in ivi compositor.
            </description>
            <entry name="surface" value="1" summary="surface object type"/>
            <entry name="layer"   value="2" summary="layer object type"/>
            <entry name="screen"  value="3" summary="screen object type"/>
        </enum>

        <enum name="error_code">
            <description summary="possible error codes returned in error event">
                These error codes define all possible error codes returned by ivi compositor
                on server-side errors.
            </description>
            <entry name="unknown_error" value="1" summary="unknown error encountered"/>
            <entry name="file_error"    value="2" summary="file i/o error encountered"/>
        </enum>

        <event name="error">
            <description summary="server-side error detected">
                The ivi compositor encountered error while processing a request by this
                controller. The error is defined by argument error_code and optional
                error_text. Additionally the object type and id is contained in the error
                event to provide some detailes to handle the error.
                If the controller requires to associate this error event to a request,
                it can
                    1. send request
                    2. force display roundtrip
                    3. check, if error event was received
                 but this restricts the controller to have only one open request at a time.
            </description>
            <arg name="object_id" type="int"/>
            <arg name="object_type" type="int"/>
            <arg name="error_code" type="int"/>
            <arg name="error_text" type="string" allow-null="true"/>
        </event>

    </interface>

</protocol>