path: root/src/tools/qdoc/doc/qdoc-manual-contextcmds.qdoc

/****************************************************************************
**
** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
** Contact: http://www.qt-project.org/legal
**
** This file is part of the documentation of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:FDL$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and Digia.  For licensing terms and
** conditions see http://qt.digia.com/licensing.  For further information
** use the contact form at http://qt.digia.com/contact-us.
**
** GNU Free Documentation License Usage
** Alternatively, this file may be used under the terms of the GNU Free
** Documentation License version 1.3 as published by the Free Software
** Foundation and appearing in the file included in the packaging of
** this file.  Please review the following information to ensure
** the GNU Free Documentation License version 1.3 requirements
** will be met: http://www.gnu.org/copyleft/fdl.html.
** $QT_END_LICENSE$
**
****************************************************************************/

/*!
    \page 14-qdoc-commands-contextcommands.html
    \previouspage Topic Commands
    \contentspage QDoc Manual
    \nextpage Document Navigation

    \title Context Commands

    The context commands provide information about the element being
    documented that QDoc can't deduce on its own. For example:
    \list
    \li Is this class thread-safe?
    \li Is this function reentrant?
    \li Of which module is this class a member ?
    \endlist

    Context commands can appear anywhere in a QDoc comment,
    but they are normally placed near the top of the comment, just
    below the \l {Topic Commands} {topic} command.

    \list
      \li \l {compat-command}{\\compat},
      \li \l {contentspage-command}{\\contentspage},
      \li \l {indexpage-command}{\\indexpage},
      \li \l {ingroup-command}{\\ingroup},
      \li \l {inherits-command}{\\inherits},
      \li \l {inmodule-command}{\\inmodule},
      \li \l {internal-command}{\\internal},
      \li \l {mainclass-command}{\\mainclass},
      \li \l {nextpage-command}{\\nextpage},
      \li \l {nonreentrant-command}{\\nonreentrant},
      \li \l {obsolete-command}{\\obsolete},
      \li \l {overload-command}{\\overload},
      \li \l {preliminary-command}{\\preliminary},
      \li \l {previouspage-command}{\\previouspage},
      \li \l {reentrant-command}{\\reentrant},
      \li \l {reimp-command}{\\reimp},
      \li \l {relates-command}{\\relates},
      \li \l {since-command}{\\since},
      \li \l {startpage-command}{\\startpage},
      \li \l {subtitle-command}{\\subtitle}
      \li \l {threadsafe-command}{\\threadsafe},
      \li \l {title-command}{\\title}
    \endlist

*/

/*!
    \page 15-qdoc-commands-navigation.html
    \previouspage Context Commands
    \contentspage QDoc Manual
    \nextpage Reporting Status

    \title Document Navigation

    The navigation commands are for linking the pages of a document in
    a meaningful sequence. Below is a sequence of QDoc comments that
    shows a typical use of the navigation commands.

    \section1 Example
    \quotefile files/basicqt.qdoc.sample

    QDoc renders the "Getting Started" page in \c{creatingdialogs.html}:

    \quotation
    \raw HTML
        <table border="0" cellpadding="0" cellspacing="5" width="100%">

        <tr>
        <p>
        [Previous: <a href="15-qdoc-commands-navigation.html#deadlink">
        Basic Qt</a>]
        [<a href="15-qdoc-commands-navigation.html#deadlink">Contents</a>]
        [Next: <a href="15-qdoc-commands-navigation.html#deadlink">
        Creating Dialogs</a>]
        </p>

        <h1 align="center">Getting Started<br /></h1>

        <p>
        This chapter shows how to combine basic C++ with the
        functionality provided by Qt to create a few small graphical
        interface (GUI) applications.
        </p>

        <p>
        [Previous: <a href="15-qdoc-commands-navigation.html#deadlink">
        Basic Qt</a>]
        [<a href="15-qdoc-commands-navigation.html#deadlink">Contents</a>]
        [Next: <a href="15-qdoc-commands-navigation.html#deadlink">
        Creating Dialogs</a>]
        </p>

        </table>
    \endraw
    \endquotation

    The \l {indexpage-command} {\\indexpage} and \l
    {startpage-command} {\\startpage} commands create links to the
    page's index page and start page. These links can be used by
    browsers and search engines.

    The index page is typically an alphabetical list of the document's
    titles and topics, while the start page is the page considered by
    the author to be the starting point of a multipage document.

    The links are included in the generated HTML source code, but have
    no visual effect on the documentation:

    \code
    <head>
        ...
        <link rel="index" href="index.html" />
        <link rel="start" href="basicqt.html" />
        ...
    </head>
    \endcode

    \section1 Commands

    \target previouspage-command
    \section2 \\previouspage

    The \\previouspage command links the current page to the previous
    page in a sequence.a The command has two arguments, each enclosed
    by curly braces: the first is the link target (the title of
    the previous page), the second is the link text. If the page's
    title is equivalent to the link text, the second argument can be
    omitted.

    The command must stand alone on its own line.

    \target nextpage-command
    \section2 \\nextpage

    The \\nextpage command links the current page to the next page in
    a sequence. The command follows the same syntax and argument
    convention as the \l {previouspage-command} {\\previouspage}
    command.

    \target startpage-command
    \section2 \\startpage

    The \\startpage command specifies the first page of a sequence of
    pages. The command must stand alone on its own line, and its
    unique argument is the title of the first document.

    QDoc will generate a link to the start page and include it in the
    generated HTML file, but this has no visual effect on the
    documentation. The generated link type tells browsers and search
    engines which document is considered by the author to be the
    starting point of the collection.

    \target contentspage-command
    \section2 \\contentspage

    The \\contentspage command links the current page to a table of
    contents page. The command follows the same syntax and argument
    convention as the \l {previouspage-command} {\\previouspage}
    command.

    \target indexpage-command
    \section2 \\indexpage

    The \\indexpage command specifies an index page for the current
    document. The command must stand alone on its own line, and its
    unique argument is the title of the index document.

    QDoc will generate a link to the index page and include it in the
    generated HTML file, but this has no visual effect on the
    documentation. The generated link type tells browsers and search
    engines which document is considered by the author to be the
    index page of the collection.
*/


/*!
    \page 16-qdoc-commands-status.html
    \previouspage Document Navigation
    \contentspage QDoc Manual
    \nextpage Thread Support

    \title Reporting Status

    These commands are for indicating that a documented element is
    still under development, is becoming obsolete, is provided for
    compatibility reasons, or is simply not to be included in the
    public interface. The \l {since-command}{\\since} command is for
    including information about the version when a function or class
    first appeared.

    \target compat-command
    \section1 \\compat

    The \\compat command is for indicating that a class or function is
    part of the support library provided to keep old source code
    working.

    The command must stand on its own line.

    Usually an equivalent function or class is provided as an
    alternative.

    If the command is used in the documentation of a class, the
    command expands to a warning that the referenced class is part of
    the support library. The warning is located at the top of the
    documentation page.

    \code
    \beginqdoc
        \class MyQt3SupportClass
        \compat
    \endqdoc
    \endcode

    QDoc renders this at the top of the MyQt3SupportClass class
    reference page.

    \quotation
        \b {This class is part of the Qt 3 support
        library.} It is provided to keep old source code
        working. We strongly advise against using it in new
        code. See the \l
        {http://doc.qt.digia.com/4.0/porting4.html} {Porting
        Guide} for more information.
    \endquotation

    If the command is used when documenting a function, QDoc will
    create and link to a separate page documenting Qt 3 support
    members when generating the reference documentation for the
    associated class.

    \code
    \beginqdoc
        \fn MyClass::MyQt3SupportMemberFunction
        \compat

        Use MyNewFunction() instead.
    \endqdoc
    \endcode

    QDoc renders this in \c{myclass-qt3.html} as:

    \quotation
        \raw HTML
        <h1>Qt 3 Support Members for MyClass</h1>
        \endraw

        \b {The following class members are part of the Qt 3
        support layer.} They are provided to help you port old code to
        Qt 4. We advise against using them in new code.

        ...

        \list
            \li void MyQt3SupportMemberFunction()
            \li ...
        \endlist

        \raw HTML
        <hr />
        <h2>Member Function Documentation</h2>
        <h3>void MyQt3SupportMemberFunction ()</h3>
        <p>Use MyNewFunction() instead.</p>
        \endraw
        ...
    \endquotation

    \target default-command
    \section1 \\default

    The \\default command is for marking a QML property as the
    \l {default-properties}
    {default property}. The word \span {class="newStuff"} {default} is shown in red in
    the documentation of the property.

    \code
    / *!
        \qmlproperty list<Change> State::changes
        This property holds the changes to apply for this state.
        \default

        By default these changes are applied against the default state. If the state
        extends another state, then the changes are applied against the state being
        extended.
    * /
    \endcode

    See how QDoc renders this property on the reference page for the
    \l {State::changes}{State} type.

    \target obsolete-command
    \section1 \\obsolete

    The \\obsolete command is for indicating that a function is being
    deprecated, and it should no longer be used in new code. There is
    no guarantee for how long it will remain in the library.

    The command must stand on its own line.

    When generating the reference documentation for a class, QDoc will
    create and link to a separate page documenting its obsolete
    functions. Usually an equivalent function is provided as an
    alternative.

    \code
    / *!
        \fn MyClass::MyObsoleteFunction
        \obsolete

        Use MyNewFunction() instead.
    * /
    \endcode

    QDoc renders this in \c{myclass-obsolete.html} as:

    \quotation
        \raw HTML
        <h1>Obsolete Members for MyClass</h1>
        \endraw

        \b {The following class members are obsolete.} They are
        provided to keep old source code working. We strongly advise
        against using them in new code.

        ...

        \list
            \li void MyObsoleteFunction() \c (obsolete)
            \li ...
        \endlist

        \raw HTML
        <hr />
        <h2>Member Function Documentation</h2>
        <h3>void MyObsoleteFunction ()</h3>
        <p>Use MyNewFunction() instead.</p>
        \endraw
        ...
    \endquotation

    \target internal-command
    \section1 \\internal

    The \\internal command indicates that the referenced
    function is not part of the public interface.

    The command must stand on its own line.

    QDoc ignores the documentation as well as the documented item,
    when generating the associated class reference documentation.

    \code
    / *!
        \internal

        Tries to find the decimal separator. If it can't find
        it and the thousand delimiter is != '.' it will try to
        find a '.';
    * /
    int QDoubleSpinBoxPrivate::findDelimiter
            (const QString &str, int index) const
    {
        int dotindex = str.indexOf(delimiter, index);
        if (dotindex == -1 && thousand != dot && delimiter != dot)
            dotindex = str.indexOf(dot, index);
        return dotindex;
    }
    \endcode

    This function will not be included in the documentation.

    \target preliminary-command
    \section1 \\preliminary

    The \\preliminary command is for indicating that a referenced
    function is still under development.

    The command must stand on its own line.

    The \\preliminary command expands to a notification in the
    function documentation, and marks the function as preliminary when
    it appears in lists.

    \code
    / *!
        \preliminary

        Returns information about the joining properties of the
        character (needed for certain languages such as
        Arabic).
    * /
    QChar::Joining QChar::joining() const
    {
        return ::joining(*this);
    }
    \endcode

    QDoc renders this as:

    \quotation
        \raw HTML
        <h3>
        <a href="http://qt-project.org/doc/qt-5.0/qtcore/qchar.html#Joining-enum">Joining</a>
        QChar::joining () const</h3>
        \endraw

        \b {This function is under development and
        subject to change.}

        Returns information about the joining properties of the
        character (needed for certain languages such as
        Arabic).
    \endquotation

    And the function's entry in QChar's list of functions will be
    rendered as:

    \quotation
        \list
        \li ...
        \li Joining
           \l {Joining-enum}
              {joining}()
           const   \c (preliminary)
       \li ...
       \endlist
    \endquotation

    \target since-command
    \section1 \\since

    The \\since command tells in which minor release
    the associated functionality was added.

    \code
    / *!
        \since 4.1

        Returns an icon for \a standardIcon.

        ...

        \sa standardPixmap()
    * /
    QIcon QStyle::standardIcon(StandardPixmap standardIcon, const QStyleOption *option, const QWidget *widget) const
    {
    }
    \endcode

    QDoc renders this as:

    \quotation
        \raw HTML
        <h3>QIcon QStyle::standardIcon(StandardPixmap standardIcon, const QStyleOption *option, const QWidget *widget) const</h3>
        \endraw

        This function was introduced in Qt version 4.1

        Returns an icon for \a standardIcon.

        ...

        See also \l {QStyle::standardPixmap()} {standardPixmap()}.
    \endquotation

    QDoc generates the "Qt" reference from the \l
    {25-qdoc-configuration-derivedprojects.html#project} {\c project}
    configuration variable. For that reason this reference will change
    according to the current documentation project.

    See also \l {project}
    {\c project}.
*/


/*!
    \page 17-qdoc-commands-thread.html
    \previouspage Reporting Status
    \contentspage QDoc Manual
    \nextpage Relating Things

    \title Thread Support

    The thread support commands are for specifying the level of
    support for multithreaded programming in a class or function.
    There are three levels of support: \c threadsafe, \c reentrant and
    \c nonreentrant.

    The default is \c nonreentrant which means that the associated
    class or function cannot be called by multiple threads. \c
    Reentrant and \c threadsafe are levels primarily used for classes.

    \c Reentrant means that all the functions in the referenced class
    can be called simultaneously by multiple threads, provided that
    each invocation of the functions reference unique data. While \c
    threadsafe means that all the functions in the referenced class
    can be called simultaneously by multiple threads even when each
    invocation references shared data.

    When a class is marked \l {reentrant-command} {\\reentrant} or \l
    {threadsafe-command} {\\threadsafe}, functions in that class can
    be marked \c nonreentrant using the \l {nonreentrant-command}
    {\\nonreentrant} command.

    \section1 Example

    \target reentrant-example
    \code
    \beginqdoc
        \class QLocale
        \brief The QLocale class converts between numbers and their
        string representations in various languages.

        \reentrant
        \ingroup i18n
        \ingroup text
        \mainclass

        QLocale is initialized with a language/country pair in its
        constructor and offers number-to-string and string-to-number
        conversion functions similar to those in QString.

        ...

        \nonreentrant

        Sets the global default locale to \a locale. These values are
        used when a QLocale object is constructed with no
        arguments. If this function is not called, the system's locale
        is used.

        \warning In a multithreaded application, the default locale
        should be set at application startup, before any non-GUI
        threads are created.

        \sa system(), c()
    \endqdoc
    void QLocale::setDefault(const QLocale &locale)
    {
        default_d = locale.d;
    }
    \endcode

    QDoc renders this as:

    \quotation
        \raw HTML
            <h1><center>QLocale Class Reference</center></h1>
        \endraw

        The QLocale class converts between numbers and their string
        representations in various languages. More...

        \code
        #include <QLocale>
        \endcode

        \b {Note:} All the functions in this class are \l
        {17-qdoc-commands-thread.html#reentrant} {reentrant}, except \l
        {QLocale::setDefault()} {setDefault()}.

        ...

        \raw HTML
            <hr />
            <h2>Member Type Documentation</h2>
        \endraw

        ...

        \raw HTML
            <h3>void QLocale::setDefault ( const QLocale & locale ) </h3>
        \endraw

        Sets the global default locale to locale. These values are
        used when a QLocale object is constructed with no
        arguments. If this function is not called, the system's locale
        is used.

        \warning In a multithreaded application, the default locale
        should be set at application startup, before any non-GUI
        threads are created.

        \warning This function is not reentrant.

        See also \l {QLocale::system()} {system()} and \l
        {QLocale::c()} {c()}.

        ...
    \endquotation

    As shown above, QDoc generates a notification when a class is
    declared reentrant, and lists the exceptions (the declared
    nonreentrant functions). A link to the general documentation on \l
    {17-qdoc-commands-thread.html#reentrant} {reentrancy and thread-safety} is
    included. In addition a warning, "\b Warning: This function is
    not reentrant.", is generated in the nonreentrant functions'
    documentation.

    QDoc will generate the same notification and warnings when a class
    is declared threadsafe.

    For more information see the general documentation on \l
    {17-qdoc-commands-thread.html#reentrant} {reentrancy and thread-safety}.

    \section1 Commands

    \target threadsafe-command
    \section2 \\threadsafe

    The \\threadsafe command includes a line in the documentation to
    indicate that the associated class or function is \e threadsafe
    and can be called simultaneously by multiple threads, even when
    separate invocations reference shared data.

    The command must stand on its own line.

    The documentation generated from this command will be similar to
    the what is generated for the \l {reentrant-command} {\\reentrant}
    command. See the example above in the \l {reentrant-example}
    {introduction}.

    See also \l{reentrant-command} {\\reentrant} and
    \l{nonreentrant-command} {\\nonreentrant}.

    \target reentrant-command
    \section2 \\reentrant

    The \\reentrant command indicates that the associated class or
    function can be called simultaneously by multiple threads,
    provided that each invocation references its own data. See the \l
    {reentrant-example} {example} above.

    The command must stand on its own line.

    See also \l{nonreentrant-command} {\\nonreentrant} and
    \l{threadsafe-command} {\\threadsafe}.

    \target nonreentrant-command
    \section2 \\nonreentrant

    The \\nonreentrant command indicates that the associated class or
    function cannot be called by multiple threads. Nonreentrant is the
    default case.

    The command must stand on its own line.

    When a class is marked \l {reentrant-command} {\\reentrant} or \l
    {threadsafe-command} {\\threadsafe}, functions in that class can
    be marked \c nonreentrant using this command in the \l{fn-command}
    {\\fn} comment of the functions to be excluded.

    See also \l{reentrant-command} {\\reentrant} and
    \l{threadsafe-command} {\\threadsafe}.
*/

    / *!

/*!
    \page 18-qdoc-commands-relating.html
    \previouspage Thread Support
    \contentspage QDoc Manual
    \nextpage Grouping Things

    \title Relating Things

    The relating commands are for specifying how one documented
    element relates to another documented element. Some examples:
    \list
    \li This function is an overload of another function.
    \li This function is a reimplementation of another function.
    \li This typedef is \e related to some class or header file.
    \endlist

    There is also a command for documenting that a QML type inherits
    some other QML type.

    \section1 Commands

    \target inherits-command
    \section2 \\inherits

    The \\inherits command is for documenting that one QML type
    inherits some other QML type. It must be included in the
    inheriting element's \l{qmltype-command}{\\qmltype} comment.
    The argument is the name of the inherited QML type.

    \code
    / *!
        \qmltype PauseAnimation
        \instantiates QDeclarativePauseAnimation
        \ingroup qml-animation-transition
        \since 4.7
        \inherits Animation
        \brief The PauseAnimation element provides a pause for an animation.

        When used in a SequentialAnimation, PauseAnimation is a step
        when nothing happens, for a specified duration.

        A 500ms animation sequence, with a 100ms pause between two animations:

        SequentialAnimation {
            NumberAnimation { ... duration: 200 }
            PauseAnimation { duration: 100 }
            NumberAnimation { ... duration: 200 }
        }

        \sa {QML Animation and Transitions}, {declarative/animation/basics}{Animation basics example}
    * /
    \endcode

    QDoc includes this line on the reference page for the
    \l{http://qt-project.org/doc/qt-4.7/qml-pauseanimation.html} {PauseAnimation}
    element:

    \quotation
        Inherits \l{http://qt-project.org/doc/qt-4.7/qml-animation.html} {Animation}
    \endquotation

    \target overload-command
    \section2 \\overload

    The \\overload command is for indicating that a function is a
    secondary overload of its name.

    The command must stand on its own line.

    For a function name that is overloaded (except constructors), QDoc
    expects one primary version of the function, and all the others
    marked with the \b {\\overload command}. The primary version
    should be fully documented. Each overload can have whatever extra
    documentation you want to add for just that overloaded version.

    From Qt 4.5, you can include the function name plus '()' as a
    parameter to the \b{\\overload} command, which will include a
    standard \e{This function overloads...}  line of text with a link
    to the documentation for the primary version of the function.

    \code
    / *!
        \overload addAction()

        This convenience function creates a new action with an
        \a icon and some \a text. The function adds the newly
        created action to the menu's list of actions, and
        returns it.

        \sa QWidget::addAction()
    * /
    QAction *QMenu::addAction(const QIcon &icon, const QString &text)
    {
        QAction *ret = new QAction(icon, text, this);
        addAction(ret);
        return ret;
    }
    \endcode

    QDoc renders this as:

    \quotation
        \raw HTML
        <h3><a href="http://qt-project.org/doc/qt-5.0/qtwidgets/qaction.html">QAction</a>
        * QMenu::addAction ( const QIcon & <i>icon</i>,
        const QString & <i>text</i> )
        </h3>
        \endraw

    This function overloads \l {addAction} {addAction()}

        This convenience function creates a new action with an
        \e icon and some \e text. The function adds the newly
        created action to the menu's list of actions, and
        returns it.

        See also
        \l {addAction}
        {QWidget::addAction}().
    \endquotation

    If you don't include the function name with the \b{\\overload}
    command, then instead of the "This function overloads..." line
    with the link to the documentation for the primary version, you
    get the old standard line:

    \quotation
        This is an overloaded member function, provided for
        convenience.
    \endquotation.

    \target reimp-command
    \section2 \\reimp

    The \\reimp command is for indicating that a function is a
    reimplementation of a virtual function.

    The command must stand on its own line.

    QDoc will omit the reimplemented function from the class
    reference.

    \code
    / *!
        \reimp
    * /
    void QToolButton::nextCheckState()
    {
        Q_D(QToolButton);
        if (!d->defaultAction)
            QAbstractButton::nextCheckState();
        else
            d->defaultAction->trigger();
    }
    \endcode

    This function will not be included in the documentation. Instead,
    a link to the base function QAbstractButton::nextCheckState() will
    appear in the documentation.

    \target relates-command
    \section2 \\relates

    The \\relates command is for including the documentation of a
    global element to some class or header file. The argument is a
    class name or header file.

    \code
    / *!
        \relates QChar

        Reads a char from the stream \a in into char \a chr.

        \sa {Format of the QDataStream operators}
    * /
    QDataStream &operator>>(QDataStream &in, QChar &chr)
    {
        quint16 u;
        in >> u;
        chr.unicode() = ushort(u);
        return in;
    }
    \endcode

    The documentation for this function will be included on the reference page
    for class QChar.
*/

/*!
    \page 19-qdoc-commands-grouping.html
    \previouspage Relating Things
    \contentspage QDoc Manual
    \nextpage Naming Things

    \title Grouping Things

    The grouping commands relate classes to defined groups and
    modules. The groups are used when generating lists of related
    classes in the documentation, while the modules are elements of
    Qt's structure.

    \section1 Commands

    \target mainclass-command
    \section2 \\mainclass

    The \\mainclass command relates the documented class to
    a group called mainclasses.

    The command must stand on its own line.

    \code
    / *!
        \class QWidget qwidget.h
        \brief The QWidget class is the base class of
        all user interface objects.

        \mainclass

        ...
    * /
    \endcode

    This will include the QWidget class in the \e mainclasses
    group, which means, for example, that the class will appear on the
    list created by calling the \l {generatelist-command}
    {\\generatelist} command with the \c mainclasses argument:

    \l http://doc.qt.digia.com/4.0/mainclasses.html

    \note The Qt documentation no longer includes the \e mainclasses
    page.

    See also \l {generatelist-command} {\\generatelist}.

    \target ingroup-command
    \section2 \\ingroup

    The \\ingroup command indicates that the given
    overview or documented class belongs to a certain group of
    related docmentation.

    A class or overview may belong to many groups.

    The \\ingroup command's argument is a group name, but note
    that the command considers the rest of the line as part of
    its argument. Make sure that the group name is followed by
    a linebreak.

    \code
    / *!
        \class QDir
        \brief The QDir class provides access to directory
               structures and their contents.

        \ingroup io
        ...
    * /
    \endcode

    This will include the QDir class in the \c io group, which means,
    for example, that QDir will appear on the list created by calling
    the \l {group-command} {\\group} command with the \c io argument.

    To list overviews that are related to a certain group, you must
    generate the list explicitly using the \l {generatelist-command}
    {\\generatelist} command with the \c related argument.

    See also \l {group-command} {\\group}.

    \target inmodule-command
    \section2 \\inmodule

    The \\inmodule command relates a class to the module specified by
    the command's argument.

    For the basic classes in Qt, a class's module is determined by its
    location, namely its directory. However, for extensions like
    ActiveQt and Qt Designer, a class must be related to a module
    explicitly.

    The command's argument is a module name, but note that the command
    considers the rest of the line as part of its argument. Make sure
    that the module name is followed by a linebreak.

    \code
    /*!
        \class QDesignerTaskMenuExtension
        \inmodule QtDesigner
    * /
    \endcode

    This ensures that the QDesignerTaskMenuExtension class is included
    in the Qt Designer module, which means, for example, that the
    class will appear on the list created by calling the \l
    {generatelist-command} {\\generatelist} command with the \c
    {{classesbymodule QtDesigner}} argument.

    See also \l {module-command} {\\module} and \l
    {generatelist-command} {\\generatelist}.
*/

/*!
    \page 20-qdoc-commands-namingthings.html
    \previouspage Grouping Things
    \contentspage QDoc Manual
    \nextpage Markup Commands

    \title Naming Things

    In general, a title command considers everything that follows it
    until the first line break as its argument. If the title is so
    long it must span multiple lines, end each line (except the last
    one) with a backslash.

    \section1 Commands

    \target title-command
    \section2 \\title

    The \\title command sets the title for a documentation page, or
    allows you to override it.

    \code
    / *!
        \page signalandslots.html

        \title Signals & Slots

        Signals and slots are used for communication between
        objects. The signals and slots mechanism is a central
        feature of Qt, and probably the part that differs most
        from the features provided by other frameworks.

        ...
    * /
    \endcode

    QDoc renders this as:

    \quotation
        \raw HTML
            <h1><center>Signal and Slots</center></h1>
        \endraw

        Signals and slots are used for communication between
        objects. The signals and slots mechanism is a central
        feature of Qt and probably the part that differs most
        from the features provided by other frameworks.
        ...
    \endquotation
    See also \l {subtitle-command} {\\subtitle}.

    \target subtitle-command
    \section2 \\subtitle

    The \\subtitle command sets a subtitle for a documentation page.

    \code
    \beginqdoc
        \page qtopiacore-overview.html

        \title Qtopia Core
        \subtitle Qt for Embedded Linux

        Qt/Embedded, the embedded Linux port of Qt, is a
        complete and self-contained C++ GUI and platform
        development tool for Linux-based embedded development.
        ...
    \endqdoc
    \endcode

    QDoc renders this as:

    \quotation
        \raw HTML
            <h1><center>Qtopia Core</center></h1>
            <h2><center>Qt for Embedded Linux</center></h2>
        \endraw

        Qt/Embedded, the embedded Linux port of Qt, is a
        complete and self-contained C++ GUI and platform
        development tool for Linux-based embedded development.
        ...
    \endquotation

    See also \l {title-command} {\\title}.

*/