path: root/src/backend/storage/ipc/procarray.c

/*-------------------------------------------------------------------------
 *
 * procarray.c
 *	  POSTGRES process array code.
 *
 *
 * This module maintains an unsorted array of the PGPROC structures for all
 * active backends.  Although there are several uses for this, the principal
 * one is as a means of determining the set of currently running transactions.
 *
 * Because of various subtle race conditions it is critical that a backend
 * hold the correct locks while setting or clearing its MyProc->xid field.
 * See notes in src/backend/access/transam/README.
 *
 * The process array now also includes PGPROC structures representing
 * prepared transactions.  The xid and subxids fields of these are valid,
 * as are the myProcLocks lists.  They can be distinguished from regular
 * backend PGPROCs at need by checking for pid == 0.
 *
 * During hot standby, we also keep a list of XIDs representing transactions
 * that are known to be running in the master (or more precisely, were running
 * as of the current point in the WAL stream).	This list is kept in the
 * KnownAssignedXids array, and is updated by watching the sequence of
 * arriving XIDs.  This is necessary because if we leave those XIDs out of
 * snapshots taken for standby queries, then they will appear to be already
 * complete, leading to MVCC failures.	Note that in hot standby, the PGPROC
 * array represents standby processes, which by definition are not running
 * transactions that have XIDs.
 *
 * It is perhaps possible for a backend on the master to terminate without
 * writing an abort record for its transaction.  While that shouldn't really
 * happen, it would tie up KnownAssignedXids indefinitely, so we protect
 * ourselves by pruning the array when a valid list of running XIDs arrives.
 *
 * Portions Copyright (c) 1996-2010, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  src/backend/storage/ipc/procarray.c
 *
 *-------------------------------------------------------------------------
 */
#include "postgres.h"

#include <signal.h>

#include "access/clog.h"
#include "access/subtrans.h"
#include "access/transam.h"
#include "access/xact.h"
#include "access/twophase.h"
#include "miscadmin.h"
#include "storage/procarray.h"
#include "storage/spin.h"
#include "storage/standby.h"
#include "utils/builtins.h"
#include "utils/snapmgr.h"


/* Our shared memory area */
typedef struct ProcArrayStruct
{
	int			numProcs;		/* number of valid procs entries */
	int			maxProcs;		/* allocated size of procs array */

	/*
	 * Known assigned XIDs handling
	 */
	int			maxKnownAssignedXids;	/* allocated size of array */
	int			numKnownAssignedXids;	/* currrent # of valid entries */
	int			tailKnownAssignedXids;	/* index of oldest valid element */
	int			headKnownAssignedXids;	/* index of newest element, + 1 */
	slock_t		known_assigned_xids_lck;		/* protects head/tail pointers */

	/*
	 * Highest subxid that has been removed from KnownAssignedXids array to
	 * prevent overflow; or InvalidTransactionId if none.  We track this for
	 * similar reasons to tracking overflowing cached subxids in PGPROC
	 * entries.  Must hold exclusive ProcArrayLock to change this, and shared
	 * lock to read it.
	 */
	TransactionId lastOverflowedXid;

	/*
	 * We declare procs[] as 1 entry because C wants a fixed-size array, but
	 * actually it is maxProcs entries long.
	 */
	PGPROC	   *procs[1];		/* VARIABLE LENGTH ARRAY */
} ProcArrayStruct;

static ProcArrayStruct *procArray;

/*
 * Bookkeeping for tracking emulated transactions in recovery
 */
static TransactionId *KnownAssignedXids;
static bool *KnownAssignedXidsValid;
static TransactionId latestObservedXid = InvalidTransactionId;

/*
 * If we're in STANDBY_SNAPSHOT_PENDING state, standbySnapshotPendingXmin is
 * the highest xid that might still be running that we don't have in
 * KnownAssignedXids.
 */
static TransactionId standbySnapshotPendingXmin;

#ifdef XIDCACHE_DEBUG

/* counters for XidCache measurement */
static long xc_by_recent_xmin = 0;
static long xc_by_known_xact = 0;
static long xc_by_my_xact = 0;
static long xc_by_latest_xid = 0;
static long xc_by_main_xid = 0;
static long xc_by_child_xid = 0;
static long xc_by_known_assigned = 0;
static long xc_no_overflow = 0;
static long xc_slow_answer = 0;

#define xc_by_recent_xmin_inc()		(xc_by_recent_xmin++)
#define xc_by_known_xact_inc()		(xc_by_known_xact++)
#define xc_by_my_xact_inc()			(xc_by_my_xact++)
#define xc_by_latest_xid_inc()		(xc_by_latest_xid++)
#define xc_by_main_xid_inc()		(xc_by_main_xid++)
#define xc_by_child_xid_inc()		(xc_by_child_xid++)
#define xc_by_known_assigned_inc()	(xc_by_known_assigned++)
#define xc_no_overflow_inc()		(xc_no_overflow++)
#define xc_slow_answer_inc()		(xc_slow_answer++)

static void DisplayXidCache(void);
#else							/* !XIDCACHE_DEBUG */

#define xc_by_recent_xmin_inc()		((void) 0)
#define xc_by_known_xact_inc()		((void) 0)
#define xc_by_my_xact_inc()			((void) 0)
#define xc_by_latest_xid_inc()		((void) 0)
#define xc_by_main_xid_inc()		((void) 0)
#define xc_by_child_xid_inc()		((void) 0)
#define xc_by_known_assigned_inc()	((void) 0)
#define xc_no_overflow_inc()		((void) 0)
#define xc_slow_answer_inc()		((void) 0)
#endif   /* XIDCACHE_DEBUG */

/* Primitives for KnownAssignedXids array handling for standby */
static void KnownAssignedXidsCompress(bool force);
static void KnownAssignedXidsAdd(TransactionId from_xid, TransactionId to_xid,
					 bool exclusive_lock);
static bool KnownAssignedXidsSearch(TransactionId xid, bool remove);
static bool KnownAssignedXidExists(TransactionId xid);
static void KnownAssignedXidsRemove(TransactionId xid);
static void KnownAssignedXidsRemoveTree(TransactionId xid, int nsubxids,
							TransactionId *subxids);
static void KnownAssignedXidsRemovePreceding(TransactionId xid);
static int	KnownAssignedXidsGet(TransactionId *xarray, TransactionId xmax);
static int KnownAssignedXidsGetAndSetXmin(TransactionId *xarray,
							   TransactionId *xmin,
							   TransactionId xmax);
static TransactionId KnownAssignedXidsGetOldestXmin(void);
static void KnownAssignedXidsDisplay(int trace_level);

/*
 * Report shared-memory space needed by CreateSharedProcArray.
 */
Size
ProcArrayShmemSize(void)
{
	Size		size;

	/* Size of the ProcArray structure itself */
#define PROCARRAY_MAXPROCS	(MaxBackends + max_prepared_xacts)

	size = offsetof(ProcArrayStruct, procs);
	size = add_size(size, mul_size(sizeof(PGPROC *), PROCARRAY_MAXPROCS));

	/*
	 * During Hot Standby processing we have a data structure called
	 * KnownAssignedXids, created in shared memory. Local data structures are
	 * also created in various backends during GetSnapshotData(),
	 * TransactionIdIsInProgress() and GetRunningTransactionData(). All of the
	 * main structures created in those functions must be identically sized,
	 * since we may at times copy the whole of the data structures around. We
	 * refer to this size as TOTAL_MAX_CACHED_SUBXIDS.
	 *
	 * Ideally we'd only create this structure if we were actually doing hot
	 * standby in the current run, but we don't know that yet at the time
	 * shared memory is being set up.
	 */
#define TOTAL_MAX_CACHED_SUBXIDS \
	((PGPROC_MAX_CACHED_SUBXIDS + 1) * PROCARRAY_MAXPROCS)

	if (EnableHotStandby)
	{
		size = add_size(size,
						mul_size(sizeof(TransactionId),
								 TOTAL_MAX_CACHED_SUBXIDS));
		size = add_size(size,
						mul_size(sizeof(bool), TOTAL_MAX_CACHED_SUBXIDS));
	}

	return size;
}

/*
 * Initialize the shared PGPROC array during postmaster startup.
 */
void
CreateSharedProcArray(void)
{
	bool		found;

	/* Create or attach to the ProcArray shared structure */
	procArray = (ProcArrayStruct *)
		ShmemInitStruct("Proc Array",
						add_size(offsetof(ProcArrayStruct, procs),
								 mul_size(sizeof(PGPROC *),
										  PROCARRAY_MAXPROCS)),
						&found);

	if (!found)
	{
		/*
		 * We're the first - initialize.
		 */
		procArray->numProcs = 0;
		procArray->maxProcs = PROCARRAY_MAXPROCS;
		procArray->maxKnownAssignedXids = TOTAL_MAX_CACHED_SUBXIDS;
		procArray->numKnownAssignedXids = 0;
		procArray->tailKnownAssignedXids = 0;
		procArray->headKnownAssignedXids = 0;
		SpinLockInit(&procArray->known_assigned_xids_lck);
		procArray->lastOverflowedXid = InvalidTransactionId;
	}

	/* Create or attach to the KnownAssignedXids arrays too, if needed */
	if (EnableHotStandby)
	{
		KnownAssignedXids = (TransactionId *)
			ShmemInitStruct("KnownAssignedXids",
							mul_size(sizeof(TransactionId),
									 TOTAL_MAX_CACHED_SUBXIDS),
							&found);
		KnownAssignedXidsValid = (bool *)
			ShmemInitStruct("KnownAssignedXidsValid",
							mul_size(sizeof(bool), TOTAL_MAX_CACHED_SUBXIDS),
							&found);
	}
}

/*
 * Add the specified PGPROC to the shared array.
 */
void
ProcArrayAdd(PGPROC *proc)
{
	ProcArrayStruct *arrayP = procArray;

	LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);

	if (arrayP->numProcs >= arrayP->maxProcs)
	{
		/*
		 * Ooops, no room.	(This really shouldn't happen, since there is a
		 * fixed supply of PGPROC structs too, and so we should have failed
		 * earlier.)
		 */
		LWLockRelease(ProcArrayLock);
		ereport(FATAL,
				(errcode(ERRCODE_TOO_MANY_CONNECTIONS),
				 errmsg("sorry, too many clients already")));
	}

	arrayP->procs[arrayP->numProcs] = proc;
	arrayP->numProcs++;

	LWLockRelease(ProcArrayLock);
}

/*
 * Remove the specified PGPROC from the shared array.
 *
 * When latestXid is a valid XID, we are removing a live 2PC gxact from the
 * array, and thus causing it to appear as "not running" anymore.  In this
 * case we must advance latestCompletedXid.  (This is essentially the same
 * as ProcArrayEndTransaction followed by removal of the PGPROC, but we take
 * the ProcArrayLock only once, and don't damage the content of the PGPROC;
 * twophase.c depends on the latter.)
 */
void
ProcArrayRemove(PGPROC *proc, TransactionId latestXid)
{
	ProcArrayStruct *arrayP = procArray;
	int			index;

#ifdef XIDCACHE_DEBUG
	/* dump stats at backend shutdown, but not prepared-xact end */
	if (proc->pid != 0)
		DisplayXidCache();
#endif

	LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);

	if (TransactionIdIsValid(latestXid))
	{
		Assert(TransactionIdIsValid(proc->xid));

		/* Advance global latestCompletedXid while holding the lock */
		if (TransactionIdPrecedes(ShmemVariableCache->latestCompletedXid,
								  latestXid))
			ShmemVariableCache->latestCompletedXid = latestXid;
	}
	else
	{
		/* Shouldn't be trying to remove a live transaction here */
		Assert(!TransactionIdIsValid(proc->xid));
	}

	for (index = 0; index < arrayP->numProcs; index++)
	{
		if (arrayP->procs[index] == proc)
		{
			arrayP->procs[index] = arrayP->procs[arrayP->numProcs - 1];
			arrayP->procs[arrayP->numProcs - 1] = NULL; /* for debugging */
			arrayP->numProcs--;
			LWLockRelease(ProcArrayLock);
			return;
		}
	}

	/* Ooops */
	LWLockRelease(ProcArrayLock);

	elog(LOG, "failed to find proc %p in ProcArray", proc);
}


/*
 * ProcArrayEndTransaction -- mark a transaction as no longer running
 *
 * This is used interchangeably for commit and abort cases.  The transaction
 * commit/abort must already be reported to WAL and pg_clog.
 *
 * proc is currently always MyProc, but we pass it explicitly for flexibility.
 * latestXid is the latest Xid among the transaction's main XID and
 * subtransactions, or InvalidTransactionId if it has no XID.  (We must ask
 * the caller to pass latestXid, instead of computing it from the PGPROC's
 * contents, because the subxid information in the PGPROC might be
 * incomplete.)
 */
void
ProcArrayEndTransaction(PGPROC *proc, TransactionId latestXid)
{
	if (TransactionIdIsValid(latestXid))
	{
		/*
		 * We must lock ProcArrayLock while clearing proc->xid, so that we do
		 * not exit the set of "running" transactions while someone else is
		 * taking a snapshot.  See discussion in
		 * src/backend/access/transam/README.
		 */
		Assert(TransactionIdIsValid(proc->xid));

		LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);

		proc->xid = InvalidTransactionId;
		proc->lxid = InvalidLocalTransactionId;
		proc->xmin = InvalidTransactionId;
		/* must be cleared with xid/xmin: */
		proc->vacuumFlags &= ~PROC_VACUUM_STATE_MASK;
		proc->inCommit = false; /* be sure this is cleared in abort */
		proc->recoveryConflictPending = false;

		/* Clear the subtransaction-XID cache too while holding the lock */
		proc->subxids.nxids = 0;
		proc->subxids.overflowed = false;

		/* Also advance global latestCompletedXid while holding the lock */
		if (TransactionIdPrecedes(ShmemVariableCache->latestCompletedXid,
								  latestXid))
			ShmemVariableCache->latestCompletedXid = latestXid;

		LWLockRelease(ProcArrayLock);
	}
	else
	{
		/*
		 * If we have no XID, we don't need to lock, since we won't affect
		 * anyone else's calculation of a snapshot.  We might change their
		 * estimate of global xmin, but that's OK.
		 */
		Assert(!TransactionIdIsValid(proc->xid));

		proc->lxid = InvalidLocalTransactionId;
		proc->xmin = InvalidTransactionId;
		/* must be cleared with xid/xmin: */
		proc->vacuumFlags &= ~PROC_VACUUM_STATE_MASK;
		proc->inCommit = false; /* be sure this is cleared in abort */
		proc->recoveryConflictPending = false;

		Assert(proc->subxids.nxids == 0);
		Assert(proc->subxids.overflowed == false);
	}
}


/*
 * ProcArrayClearTransaction -- clear the transaction fields
 *
 * This is used after successfully preparing a 2-phase transaction.  We are
 * not actually reporting the transaction's XID as no longer running --- it
 * will still appear as running because the 2PC's gxact is in the ProcArray
 * too.  We just have to clear out our own PGPROC.
 */
void
ProcArrayClearTransaction(PGPROC *proc)
{
	/*
	 * We can skip locking ProcArrayLock here, because this action does not
	 * actually change anyone's view of the set of running XIDs: our entry is
	 * duplicate with the gxact that has already been inserted into the
	 * ProcArray.
	 */
	proc->xid = InvalidTransactionId;
	proc->lxid = InvalidLocalTransactionId;
	proc->xmin = InvalidTransactionId;
	proc->recoveryConflictPending = false;

	/* redundant, but just in case */
	proc->vacuumFlags &= ~PROC_VACUUM_STATE_MASK;
	proc->inCommit = false;

	/* Clear the subtransaction-XID cache too */
	proc->subxids.nxids = 0;
	proc->subxids.overflowed = false;
}

/*
 * ProcArrayInitRecoveryInfo
 *
 * When trying to assemble our snapshot we only care about xids after this value.
 * See comments for LogStandbySnapshot().
 */
void
ProcArrayInitRecoveryInfo(TransactionId oldestActiveXid)
{
	latestObservedXid = oldestActiveXid;
	TransactionIdRetreat(latestObservedXid);
}

/*
 * ProcArrayApplyRecoveryInfo -- apply recovery info about xids
 *
 * Takes us through 3 states: Initialized, Pending and Ready.
 * Normal case is to go all the way to Ready straight away, though there
 * are atypical cases where we need to take it in steps.
 *
 * Use the data about running transactions on master to create the initial
 * state of KnownAssignedXids. We also use these records to regularly prune
 * KnownAssignedXids because we know it is possible that some transactions
 * with FATAL errors fail to write abort records, which could cause eventual
 * overflow.
 *
 * See comments for LogStandbySnapshot().
 */
void
ProcArrayApplyRecoveryInfo(RunningTransactions running)
{
	TransactionId *xids;
	int			nxids;
	TransactionId nextXid;
	int			i;

	Assert(standbyState >= STANDBY_INITIALIZED);
	Assert(TransactionIdIsValid(running->nextXid));
	Assert(TransactionIdIsValid(running->oldestRunningXid));
	Assert(TransactionIdIsNormal(running->latestCompletedXid));

	/*
	 * Remove stale transactions, if any.
	 */
	ExpireOldKnownAssignedTransactionIds(running->oldestRunningXid);
	StandbyReleaseOldLocks(running->oldestRunningXid);

	/*
	 * If our snapshot is already valid, nothing else to do...
	 */
	if (standbyState == STANDBY_SNAPSHOT_READY)
		return;

	/*
	 * If our initial RunningTransactionsData had an overflowed snapshot then we knew
	 * we were missing some subxids from our snapshot. We can use this data as
	 * an initial snapshot, but we cannot yet mark it valid. We know that the
	 * missing subxids are equal to or earlier than nextXid. After we
	 * initialise we continue to apply changes during recovery, so once the
	 * oldestRunningXid is later than the nextXid from the initial snapshot we
	 * know that we no longer have missing information and can mark the
	 * snapshot as valid.
	 */
	if (standbyState == STANDBY_SNAPSHOT_PENDING)
	{
		if (TransactionIdPrecedes(standbySnapshotPendingXmin,
								  running->oldestRunningXid))
		{
			standbyState = STANDBY_SNAPSHOT_READY;
			elog(trace_recovery(DEBUG2),
				 "running xact data now proven complete");
			elog(trace_recovery(DEBUG2),
				 "recovery snapshots are now enabled");
		}
		else
			elog(trace_recovery(DEBUG2),
				 "recovery snapshot waiting for %u oldest active xid on standby is %u",
				 standbySnapshotPendingXmin,
				 running->oldestRunningXid);
		return;
	}

	Assert(standbyState == STANDBY_INITIALIZED);

	/*
	 * OK, we need to initialise from the RunningTransactionsData record
	 */

	/*
	 * Remove all xids except xids later than the snapshot. We don't know
	 * exactly which ones that is until precisely now, so that is why we allow
	 * xids to be added only to remove most of them again here.
	 */
	ExpireOldKnownAssignedTransactionIds(running->nextXid);
	StandbyReleaseOldLocks(running->nextXid);

	/*
	 * Nobody else is running yet, but take locks anyhow
	 */
	LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);

	/*
	 * Combine the running xact data with already known xids, if any exist.
	 * KnownAssignedXids is sorted so we cannot just add new xids, we have to
	 * combine them first, sort them and then re-add to KnownAssignedXids.
	 *
	 * Some of the new xids are top-level xids and some are subtransactions.
	 * We don't call SubtransSetParent because it doesn't matter yet. If we
	 * aren't overflowed then all xids will fit in snapshot and so we don't
	 * need subtrans. If we later overflow, an xid assignment record will add
	 * xids to subtrans. If RunningXacts is overflowed then we don't have
	 * enough information to correctly update subtrans anyway.
	 */

	/*
	 * Allocate a temporary array so we can combine xids. The total of both
	 * arrays should never normally exceed TOTAL_MAX_CACHED_SUBXIDS.
	 */
	xids = palloc(sizeof(TransactionId) * TOTAL_MAX_CACHED_SUBXIDS);

	/*
	 * Get the remaining KnownAssignedXids. In most cases there won't be any
	 * at all since this exists only to catch a theoretical race condition.
	 */
	nxids = KnownAssignedXidsGet(xids, InvalidTransactionId);
	if (nxids > 0)
		KnownAssignedXidsDisplay(trace_recovery(DEBUG3));

	/*
	 * Now we have a copy of any KnownAssignedXids we can zero the array
	 * before we re-insert combined snapshot.
	 */
	KnownAssignedXidsRemovePreceding(InvalidTransactionId);

	/*
	 * Add to the temp array any xids which have not already completed, taking
	 * care not to overflow in extreme cases.
	 */
	for (i = 0; i < running->xcnt; i++)
	{
		TransactionId xid = running->xids[i];

		/*
		 * The running-xacts snapshot can contain xids that were running at
		 * the time of the snapshot, yet complete before the snapshot was
		 * written to WAL. They're running now, so ignore them.
		 */
		if (TransactionIdDidCommit(xid) || TransactionIdDidAbort(xid))
			continue;

		xids[nxids++] = xid;

		/*
		 * Test for overflow only after we have filtered out already complete
		 * transactions.
		 */
		if (nxids > TOTAL_MAX_CACHED_SUBXIDS)
			elog(ERROR, "too many xids to add into KnownAssignedXids");
	}

	if (nxids > 0)
	{
		/*
		 * Sort the array so that we can add them safely into
		 * KnownAssignedXids.
		 */
		qsort(xids, nxids, sizeof(TransactionId), xidComparator);

		/*
		 * Re-initialise latestObservedXid to the highest xid we've seen.
		 */
		latestObservedXid = xids[nxids - 1];

		/*
		 * Add the sorted snapshot into KnownAssignedXids
		 */
		for (i = 0; i < nxids; i++)
		{
			TransactionId xid = xids[i];

			KnownAssignedXidsAdd(xid, xid, true);
		}

		KnownAssignedXidsDisplay(trace_recovery(DEBUG3));
	}

	pfree(xids);

	/*
	 * Now we've got the running xids we need to set the global values thare
	 * used to track snapshots as they evolve further
	 *
	 * * latestCompletedXid which will be the xmax for snapshots *
	 * lastOverflowedXid which shows whether snapshots overflow * nextXid
	 *
	 * If the snapshot overflowed, then we still initialise with what we know,
	 * but the recovery snapshot isn't fully valid yet because we know there
	 * are some subxids missing. We don't know the specific subxids that are
	 * missing, so conservatively assume the last one is latestObservedXid.
	 * If no missing subxids, try to clear lastOverflowedXid.
	 *
	 * If the snapshot didn't overflow it's still possible that an overflow
	 * occurred in the gap between taking snapshot and logging record, so we
	 * also need to check if lastOverflowedXid is already ahead of us.
	 */
	if (running->subxid_overflow)
	{
		standbyState = STANDBY_SNAPSHOT_PENDING;

		standbySnapshotPendingXmin = latestObservedXid;
		if (TransactionIdFollows(latestObservedXid,
								 procArray->lastOverflowedXid))
			procArray->lastOverflowedXid = latestObservedXid;
	}
	else if (TransactionIdFollows(procArray->lastOverflowedXid,
								  latestObservedXid))
	{
		standbyState = STANDBY_SNAPSHOT_PENDING;

		standbySnapshotPendingXmin = procArray->lastOverflowedXid;
	}
	else
	{
		standbyState = STANDBY_SNAPSHOT_READY;

		standbySnapshotPendingXmin = InvalidTransactionId;
		if (TransactionIdFollows(running->oldestRunningXid,
								 procArray->lastOverflowedXid))
			procArray->lastOverflowedXid = InvalidTransactionId;
	}

	/*
	 * If a transaction completed in the gap between taking and logging the
	 * snapshot then latestCompletedXid may already be higher than the value
	 * from the snapshot, so check before we use the incoming value.
	 */
	if (TransactionIdPrecedes(ShmemVariableCache->latestCompletedXid,
							  running->latestCompletedXid))
		ShmemVariableCache->latestCompletedXid = running->latestCompletedXid;

	/* nextXid must be beyond any observed xid */
	nextXid = latestObservedXid;
	TransactionIdAdvance(nextXid);
	if (TransactionIdFollows(nextXid, ShmemVariableCache->nextXid))
		ShmemVariableCache->nextXid = nextXid;

	Assert(TransactionIdIsNormal(ShmemVariableCache->latestCompletedXid));
	Assert(TransactionIdIsValid(ShmemVariableCache->nextXid));

	LWLockRelease(ProcArrayLock);

	elog(trace_recovery(DEBUG2), "running transaction data initialized");
	KnownAssignedXidsDisplay(trace_recovery(DEBUG3));
	if (standbyState == STANDBY_SNAPSHOT_READY)
		elog(trace_recovery(DEBUG2), "recovery snapshots are now enabled");
	else
		ereport(LOG,
				(errmsg("consistent state delayed because recovery snapshot incomplete")));
}

/*
 * ProcArrayApplyXidAssignment
 *		Process an XLOG_XACT_ASSIGNMENT WAL record
 */
void
ProcArrayApplyXidAssignment(TransactionId topxid,
							int nsubxids, TransactionId *subxids)
{
	TransactionId max_xid;
	int			i;

	Assert(standbyState >= STANDBY_INITIALIZED);

	max_xid = TransactionIdLatest(topxid, nsubxids, subxids);

	/*
	 * Mark all the subtransactions as observed.
	 *
	 * NOTE: This will fail if the subxid contains too many previously
	 * unobserved xids to fit into known-assigned-xids. That shouldn't happen
	 * as the code stands, because xid-assignment records should never contain
	 * more than PGPROC_MAX_CACHED_SUBXIDS entries.
	 */
	RecordKnownAssignedTransactionIds(max_xid);

	/*
	 * Notice that we update pg_subtrans with the top-level xid, rather than
	 * the parent xid. This is a difference between normal processing and
	 * recovery, yet is still correct in all cases. The reason is that
	 * subtransaction commit is not marked in clog until commit processing, so
	 * all aborted subtransactions have already been clearly marked in clog.
	 * As a result we are able to refer directly to the top-level
	 * transaction's state rather than skipping through all the intermediate
	 * states in the subtransaction tree. This should be the first time we
	 * have attempted to SubTransSetParent().
	 */
	for (i = 0; i < nsubxids; i++)
		SubTransSetParent(subxids[i], topxid, false);

	/*
	 * Uses same locking as transaction commit
	 */
	LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);

	/*
	 * Remove subxids from known-assigned-xacts.
	 */
	KnownAssignedXidsRemoveTree(InvalidTransactionId, nsubxids, subxids);

	/*
	 * Advance lastOverflowedXid to be at least the last of these subxids.
	 */
	if (TransactionIdPrecedes(procArray->lastOverflowedXid, max_xid))
		procArray->lastOverflowedXid = max_xid;

	LWLockRelease(ProcArrayLock);
}

/*
 * TransactionIdIsInProgress -- is given transaction running in some backend
 *
 * Aside from some shortcuts such as checking RecentXmin and our own Xid,
 * there are four possibilities for finding a running transaction:
 *
 * 1. The given Xid is a main transaction Id.  We will find this out cheaply
 * by looking at the PGPROC struct for each backend.
 *
 * 2. The given Xid is one of the cached subxact Xids in the PGPROC array.
 * We can find this out cheaply too.
 *
 * 3. In Hot Standby mode, we must search the KnownAssignedXids list to see
 * if the Xid is running on the master.
 *
 * 4. Search the SubTrans tree to find the Xid's topmost parent, and then
 * see if that is running according to PGPROC or KnownAssignedXids.  This is
 * the slowest way, but sadly it has to be done always if the others failed,
 * unless we see that the cached subxact sets are complete (none have
 * overflowed).
 *
 * ProcArrayLock has to be held while we do 1, 2, 3.  If we save the top Xids
 * while doing 1 and 3, we can release the ProcArrayLock while we do 4.
 * This buys back some concurrency (and we can't retrieve the main Xids from
 * PGPROC again anyway; see GetNewTransactionId).
 */
bool
TransactionIdIsInProgress(TransactionId xid)
{
	static TransactionId *xids = NULL;
	int			nxids = 0;
	ProcArrayStruct *arrayP = procArray;
	TransactionId topxid;
	int			i,
				j;

	/*
	 * Don't bother checking a transaction older than RecentXmin; it could not
	 * possibly still be running.  (Note: in particular, this guarantees that
	 * we reject InvalidTransactionId, FrozenTransactionId, etc as not
	 * running.)
	 */
	if (TransactionIdPrecedes(xid, RecentXmin))
	{
		xc_by_recent_xmin_inc();
		return false;
	}

	/*
	 * We may have just checked the status of this transaction, so if it is
	 * already known to be completed, we can fall out without any access to
	 * shared memory.
	 */
	if (TransactionIdIsKnownCompleted(xid))
	{
		xc_by_known_xact_inc();
		return false;
	}

	/*
	 * Also, we can handle our own transaction (and subtransactions) without
	 * any access to shared memory.
	 */
	if (TransactionIdIsCurrentTransactionId(xid))
	{
		xc_by_my_xact_inc();
		return true;
	}

	/*
	 * If not first time through, get workspace to remember main XIDs in. We
	 * malloc it permanently to avoid repeated palloc/pfree overhead.
	 */
	if (xids == NULL)
	{
		/*
		 * In hot standby mode, reserve enough space to hold all xids in the
		 * known-assigned list. If we later finish recovery, we no longer need
		 * the bigger array, but we don't bother to shrink it.
		 */
		int			maxxids = RecoveryInProgress() ? TOTAL_MAX_CACHED_SUBXIDS : arrayP->maxProcs;

		xids = (TransactionId *) malloc(maxxids * sizeof(TransactionId));
		if (xids == NULL)
			ereport(ERROR,
					(errcode(ERRCODE_OUT_OF_MEMORY),
					 errmsg("out of memory")));
	}

	LWLockAcquire(ProcArrayLock, LW_SHARED);

	/*
	 * Now that we have the lock, we can check latestCompletedXid; if the
	 * target Xid is after that, it's surely still running.
	 */
	if (TransactionIdPrecedes(ShmemVariableCache->latestCompletedXid, xid))
	{
		LWLockRelease(ProcArrayLock);
		xc_by_latest_xid_inc();
		return true;
	}

	/* No shortcuts, gotta grovel through the array */
	for (i = 0; i < arrayP->numProcs; i++)
	{
		volatile PGPROC *proc = arrayP->procs[i];
		TransactionId pxid;

		/* Ignore my own proc --- dealt with it above */
		if (proc == MyProc)
			continue;

		/* Fetch xid just once - see GetNewTransactionId */
		pxid = proc->xid;

		if (!TransactionIdIsValid(pxid))
			continue;

		/*
		 * Step 1: check the main Xid
		 */
		if (TransactionIdEquals(pxid, xid))
		{
			LWLockRelease(ProcArrayLock);
			xc_by_main_xid_inc();
			return true;
		}

		/*
		 * We can ignore main Xids that are younger than the target Xid, since
		 * the target could not possibly be their child.
		 */
		if (TransactionIdPrecedes(xid, pxid))
			continue;

		/*
		 * Step 2: check the cached child-Xids arrays
		 */
		for (j = proc->subxids.nxids - 1; j >= 0; j--)
		{
			/* Fetch xid just once - see GetNewTransactionId */
			TransactionId cxid = proc->subxids.xids[j];

			if (TransactionIdEquals(cxid, xid))
			{
				LWLockRelease(ProcArrayLock);
				xc_by_child_xid_inc();
				return true;
			}
		}

		/*
		 * Save the main Xid for step 4.  We only need to remember main Xids
		 * that have uncached children.  (Note: there is no race condition
		 * here because the overflowed flag cannot be cleared, only set, while
		 * we hold ProcArrayLock.  So we can't miss an Xid that we need to
		 * worry about.)
		 */
		if (proc->subxids.overflowed)
			xids[nxids++] = pxid;
	}

	/*
	 * Step 3: in hot standby mode, check the known-assigned-xids list.  XIDs
	 * in the list must be treated as running.
	 */
	if (RecoveryInProgress())
	{
		/* none of the PGPROC entries should have XIDs in hot standby mode */
		Assert(nxids == 0);

		if (KnownAssignedXidExists(xid))
		{
			LWLockRelease(ProcArrayLock);
			xc_by_known_assigned_inc();
			return true;
		}

		/*
		 * If the KnownAssignedXids overflowed, we have to check pg_subtrans
		 * too.  Fetch all xids from KnownAssignedXids that are lower than
		 * xid, since if xid is a subtransaction its parent will always have a
		 * lower value.  Note we will collect both main and subXIDs here, but
		 * there's no help for it.
		 */
		if (TransactionIdPrecedesOrEquals(xid, procArray->lastOverflowedXid))
			nxids = KnownAssignedXidsGet(xids, xid);
	}

	LWLockRelease(ProcArrayLock);

	/*
	 * If none of the relevant caches overflowed, we know the Xid is not
	 * running without even looking at pg_subtrans.
	 */
	if (nxids == 0)
	{
		xc_no_overflow_inc();
		return false;
	}

	/*
	 * Step 4: have to check pg_subtrans.
	 *
	 * At this point, we know it's either a subtransaction of one of the Xids
	 * in xids[], or it's not running.  If it's an already-failed
	 * subtransaction, we want to say "not running" even though its parent may
	 * still be running.  So first, check pg_clog to see if it's been aborted.
	 */
	xc_slow_answer_inc();

	if (TransactionIdDidAbort(xid))
		return false;

	/*
	 * It isn't aborted, so check whether the transaction tree it belongs to
	 * is still running (or, more precisely, whether it was running when we
	 * held ProcArrayLock).
	 */
	topxid = SubTransGetTopmostTransaction(xid);
	Assert(TransactionIdIsValid(topxid));
	if (!TransactionIdEquals(topxid, xid))
	{
		for (i = 0; i < nxids; i++)
		{
			if (TransactionIdEquals(xids[i], topxid))
				return true;
		}
	}

	return false;
}

/*
 * TransactionIdIsActive -- is xid the top-level XID of an active backend?
 *
 * This differs from TransactionIdIsInProgress in that it ignores prepared
 * transactions, as well as transactions running on the master if we're in
 * hot standby.  Also, we ignore subtransactions since that's not needed
 * for current uses.
 */
bool
TransactionIdIsActive(TransactionId xid)
{
	bool		result = false;
	ProcArrayStruct *arrayP = procArray;
	int			i;

	/*
	 * Don't bother checking a transaction older than RecentXmin; it could not
	 * possibly still be running.
	 */
	if (TransactionIdPrecedes(xid, RecentXmin))
		return false;

	LWLockAcquire(ProcArrayLock, LW_SHARED);

	for (i = 0; i < arrayP->numProcs; i++)
	{
		volatile PGPROC *proc = arrayP->procs[i];

		/* Fetch xid just once - see GetNewTransactionId */
		TransactionId pxid = proc->xid;

		if (!TransactionIdIsValid(pxid))
			continue;

		if (proc->pid == 0)
			continue;			/* ignore prepared transactions */

		if (TransactionIdEquals(pxid, xid))
		{
			result = true;
			break;
		}
	}

	LWLockRelease(ProcArrayLock);

	return result;
}


/*
 * GetOldestXmin -- returns oldest transaction that was running
 *					when any current transaction was started.
 *
 * If allDbs is TRUE then all backends are considered; if allDbs is FALSE
 * then only backends running in my own database are considered.
 *
 * If ignoreVacuum is TRUE then backends with the PROC_IN_VACUUM flag set are
 * ignored.
 *
 * This is used by VACUUM to decide which deleted tuples must be preserved
 * in a table.	allDbs = TRUE is needed for shared relations, but allDbs =
 * FALSE is sufficient for non-shared relations, since only backends in my
 * own database could ever see the tuples in them.	Also, we can ignore
 * concurrently running lazy VACUUMs because (a) they must be working on other
 * tables, and (b) they don't need to do snapshot-based lookups.
 *
 * This is also used to determine where to truncate pg_subtrans.  allDbs
 * must be TRUE for that case, and ignoreVacuum FALSE.
 *
 * Note: we include all currently running xids in the set of considered xids.
 * This ensures that if a just-started xact has not yet set its snapshot,
 * when it does set the snapshot it cannot set xmin less than what we compute.
 * See notes in src/backend/access/transam/README.
 */
TransactionId
GetOldestXmin(bool allDbs, bool ignoreVacuum)
{
	ProcArrayStruct *arrayP = procArray;
	TransactionId result;
	int			index;

	/* Cannot look for individual databases during recovery */
	Assert(allDbs || !RecoveryInProgress());

	LWLockAcquire(ProcArrayLock, LW_SHARED);

	/*
	 * We initialize the MIN() calculation with latestCompletedXid + 1. This
	 * is a lower bound for the XIDs that might appear in the ProcArray later,
	 * and so protects us against overestimating the result due to future
	 * additions.
	 */
	result = ShmemVariableCache->latestCompletedXid;
	Assert(TransactionIdIsNormal(result));
	TransactionIdAdvance(result);

	for (index = 0; index < arrayP->numProcs; index++)
	{
		volatile PGPROC *proc = arrayP->procs[index];

		if (ignoreVacuum && (proc->vacuumFlags & PROC_IN_VACUUM))
			continue;

		if (allDbs || proc->databaseId == MyDatabaseId)
		{
			/* Fetch xid just once - see GetNewTransactionId */
			TransactionId xid = proc->xid;

			/* First consider the transaction's own Xid, if any */
			if (TransactionIdIsNormal(xid) &&
				TransactionIdPrecedes(xid, result))
				result = xid;

			/*
			 * Also consider the transaction's Xmin, if set.
			 *
			 * We must check both Xid and Xmin because a transaction might
			 * have an Xmin but not (yet) an Xid; conversely, if it has an
			 * Xid, that could determine some not-yet-set Xmin.
			 */
			xid = proc->xmin;	/* Fetch just once */
			if (TransactionIdIsNormal(xid) &&
				TransactionIdPrecedes(xid, result))
				result = xid;
		}
	}

	if (RecoveryInProgress())
	{
		/*
		 * Check to see whether KnownAssignedXids contains an xid value
		 * older than the main procarray.
		 */
		TransactionId kaxmin = KnownAssignedXidsGetOldestXmin();

		if (TransactionIdIsNormal(kaxmin) &&
			TransactionIdPrecedes(kaxmin, result))
				result = kaxmin;
	}

	LWLockRelease(ProcArrayLock);

	/*
	 * Compute the cutoff XID, being careful not to generate a "permanent"
	 * XID.
	 *
	 * vacuum_defer_cleanup_age provides some additional "slop" for the
	 * benefit of hot standby queries on slave servers.  This is quick and
	 * dirty, and perhaps not all that useful unless the master has a
	 * predictable transaction rate, but it's what we've got.  Note that we
	 * are assuming vacuum_defer_cleanup_age isn't large enough to cause
	 * wraparound --- so guc.c should limit it to no more than the
	 * xidStopLimit threshold in varsup.c.
	 */
	result -= vacuum_defer_cleanup_age;
	if (!TransactionIdIsNormal(result))
		result = FirstNormalTransactionId;

	return result;
}

/*
 * GetSnapshotData -- returns information about running transactions.
 *
 * The returned snapshot includes xmin (lowest still-running xact ID),
 * xmax (highest completed xact ID + 1), and a list of running xact IDs
 * in the range xmin <= xid < xmax.  It is used as follows:
 *		All xact IDs < xmin are considered finished.
 *		All xact IDs >= xmax are considered still running.
 *		For an xact ID xmin <= xid < xmax, consult list to see whether
 *		it is considered running or not.
 * This ensures that the set of transactions seen as "running" by the
 * current xact will not change after it takes the snapshot.
 *
 * All running top-level XIDs are included in the snapshot, except for lazy
 * VACUUM processes.  We also try to include running subtransaction XIDs,
 * but since PGPROC has only a limited cache area for subxact XIDs, full
 * information may not be available.  If we find any overflowed subxid arrays,
 * we have to mark the snapshot's subxid data as overflowed, and extra work
 * *may* need to be done to determine what's running (see XidInMVCCSnapshot()
 * in tqual.c).
 *
 * We also update the following backend-global variables:
 *		TransactionXmin: the oldest xmin of any snapshot in use in the
 *			current transaction (this is the same as MyProc->xmin).
 *		RecentXmin: the xmin computed for the most recent snapshot.  XIDs
 *			older than this are known not running any more.
 *		RecentGlobalXmin: the global xmin (oldest TransactionXmin across all
 *			running transactions, except those running LAZY VACUUM).  This is
 *			the same computation done by GetOldestXmin(true, true).
 *
 * Note: this function should probably not be called with an argument that's
 * not statically allocated (see xip allocation below).
 */
Snapshot
GetSnapshotData(Snapshot snapshot)
{
	ProcArrayStruct *arrayP = procArray;
	TransactionId xmin;
	TransactionId xmax;
	TransactionId globalxmin;
	int			index;
	int			count = 0;
	int			subcount = 0;
	bool		suboverflowed = false;

	Assert(snapshot != NULL);

	/*
	 * Allocating space for maxProcs xids is usually overkill; numProcs would
	 * be sufficient.  But it seems better to do the malloc while not holding
	 * the lock, so we can't look at numProcs.  Likewise, we allocate much
	 * more subxip storage than is probably needed.
	 *
	 * This does open a possibility for avoiding repeated malloc/free: since
	 * maxProcs does not change at runtime, we can simply reuse the previous
	 * xip arrays if any.  (This relies on the fact that all callers pass
	 * static SnapshotData structs.)
	 */
	if (snapshot->xip == NULL)
	{
		/*
		 * First call for this snapshot. Snapshot is same size whether or not
		 * we are in recovery, see later comments.
		 */
		snapshot->xip = (TransactionId *)
			malloc(arrayP->maxProcs * sizeof(TransactionId));
		if (snapshot->xip == NULL)
			ereport(ERROR,
					(errcode(ERRCODE_OUT_OF_MEMORY),
					 errmsg("out of memory")));
		Assert(snapshot->subxip == NULL);
		snapshot->subxip = (TransactionId *)
			malloc(TOTAL_MAX_CACHED_SUBXIDS * sizeof(TransactionId));
		if (snapshot->subxip == NULL)
			ereport(ERROR,
					(errcode(ERRCODE_OUT_OF_MEMORY),
					 errmsg("out of memory")));
	}

	/*
	 * It is sufficient to get shared lock on ProcArrayLock, even if we are
	 * going to set MyProc->xmin.
	 */
	LWLockAcquire(ProcArrayLock, LW_SHARED);

	/* xmax is always latestCompletedXid + 1 */
	xmax = ShmemVariableCache->latestCompletedXid;
	Assert(TransactionIdIsNormal(xmax));
	TransactionIdAdvance(xmax);

	/* initialize xmin calculation with xmax */
	globalxmin = xmin = xmax;

	/*
	 * If we're in recovery then snapshot data comes from a different place,
	 * so decide which route we take before grab the lock. It is possible for
	 * recovery to end before we finish taking snapshot, and for newly
	 * assigned transaction ids to be added to the procarray. Xmax cannot
	 * change while we hold ProcArrayLock, so those newly added transaction
	 * ids would be filtered away, so we need not be concerned about them.
	 */
	snapshot->takenDuringRecovery = RecoveryInProgress();

	if (!snapshot->takenDuringRecovery)
	{
		/*
		 * Spin over procArray checking xid, xmin, and subxids.  The goal is
		 * to gather all active xids, find the lowest xmin, and try to record
		 * subxids. During recovery no xids will be assigned, so all normal
		 * backends can be ignored, nor are there any VACUUMs running. All
		 * prepared transaction xids are held in KnownAssignedXids, so these
		 * will be seen without needing to loop through procs here.
		 */
		for (index = 0; index < arrayP->numProcs; index++)
		{
			volatile PGPROC *proc = arrayP->procs[index];
			TransactionId xid;

			/* Ignore procs running LAZY VACUUM */
			if (proc->vacuumFlags & PROC_IN_VACUUM)
				continue;

			/* Update globalxmin to be the smallest valid xmin */
			xid = proc->xmin;	/* fetch just once */
			if (TransactionIdIsNormal(xid) &&
				TransactionIdPrecedes(xid, globalxmin))
				globalxmin = xid;

			/* Fetch xid just once - see GetNewTransactionId */
			xid = proc->xid;

			/*
			 * If the transaction has been assigned an xid < xmax we add it to
			 * the snapshot, and update xmin if necessary.	There's no need to
			 * store XIDs >= xmax, since we'll treat them as running anyway.
			 * We don't bother to examine their subxids either.
			 *
			 * We don't include our own XID (if any) in the snapshot, but we
			 * must include it into xmin.
			 */
			if (TransactionIdIsNormal(xid))
			{
				if (TransactionIdFollowsOrEquals(xid, xmax))
					continue;
				if (proc != MyProc)
					snapshot->xip[count++] = xid;
				if (TransactionIdPrecedes(xid, xmin))
					xmin = xid;
			}

			/*
			 * Save subtransaction XIDs if possible (if we've already
			 * overflowed, there's no point).  Note that the subxact XIDs must
			 * be later than their parent, so no need to check them against
			 * xmin.  We could filter against xmax, but it seems better not to
			 * do that much work while holding the ProcArrayLock.
			 *
			 * The other backend can add more subxids concurrently, but cannot
			 * remove any.	Hence it's important to fetch nxids just once.
			 * Should be safe to use memcpy, though.  (We needn't worry about
			 * missing any xids added concurrently, because they must postdate
			 * xmax.)
			 *
			 * Again, our own XIDs are not included in the snapshot.
			 */
			if (!suboverflowed && proc != MyProc)
			{
				if (proc->subxids.overflowed)
					suboverflowed = true;
				else
				{
					int			nxids = proc->subxids.nxids;

					if (nxids > 0)
					{
						memcpy(snapshot->subxip + subcount,
							   (void *) proc->subxids.xids,
							   nxids * sizeof(TransactionId));
						subcount += nxids;
					}
				}
			}
		}
	}
	else
	{
		/*
		 * We're in hot standby, so get XIDs from KnownAssignedXids.
		 *
		 * We store all xids directly into subxip[]. Here's why:
		 *
		 * In recovery we don't know which xids are top-level and which are
		 * subxacts, a design choice that greatly simplifies xid processing.
		 *
		 * It seems like we would want to try to put xids into xip[] only, but
		 * that is fairly small. We would either need to make that bigger or
		 * to increase the rate at which we WAL-log xid assignment; neither is
		 * an appealing choice.
		 *
		 * We could try to store xids into xip[] first and then into subxip[]
		 * if there are too many xids. That only works if the snapshot doesn't
		 * overflow because we do not search subxip[] in that case. A simpler
		 * way is to just store all xids in the subxact array because this is
		 * by far the bigger array. We just leave the xip array empty.
		 *
		 * Either way we need to change the way XidInMVCCSnapshot() works
		 * depending upon when the snapshot was taken, or change normal
		 * snapshot processing so it matches.
		 */
		subcount = KnownAssignedXidsGetAndSetXmin(snapshot->subxip, &xmin,
												  xmax);

		if (TransactionIdPrecedesOrEquals(xmin, procArray->lastOverflowedXid))
			suboverflowed = true;
	}

	if (!TransactionIdIsValid(MyProc->xmin))
		MyProc->xmin = TransactionXmin = xmin;

	LWLockRelease(ProcArrayLock);

	/*
	 * Update globalxmin to include actual process xids.  This is a slightly
	 * different way of computing it than GetOldestXmin uses, but should give
	 * the same result.
	 */
	if (TransactionIdPrecedes(xmin, globalxmin))
		globalxmin = xmin;

	/* Update global variables too */
	RecentGlobalXmin = globalxmin - vacuum_defer_cleanup_age;
	if (!TransactionIdIsNormal(RecentGlobalXmin))
		RecentGlobalXmin = FirstNormalTransactionId;
	RecentXmin = xmin;

	snapshot->xmin = xmin;
	snapshot->xmax = xmax;
	snapshot->xcnt = count;
	snapshot->subxcnt = subcount;
	snapshot->suboverflowed = suboverflowed;

	snapshot->curcid = GetCurrentCommandId(false);

	/*
	 * This is a new snapshot, so set both refcounts are zero, and mark it as
	 * not copied in persistent memory.
	 */
	snapshot->active_count = 0;
	snapshot->regd_count = 0;
	snapshot->copied = false;

	return snapshot;
}

/*
 * GetRunningTransactionData -- returns information about running transactions.
 *
 * Similar to GetSnapshotData but returns more information. We include
 * all PGPROCs with an assigned TransactionId, even VACUUM processes.
 *
 * The returned data structure is statically allocated; caller should not
 * modify it, and must not assume it is valid past the next call.
 *
 * This is never executed during recovery so there is no need to look at
 * KnownAssignedXids.
 *
 * We don't worry about updating other counters, we want to keep this as
 * simple as possible and leave GetSnapshotData() as the primary code for
 * that bookkeeping.
 */
RunningTransactions
GetRunningTransactionData(void)
{
	/* result workspace */
	static RunningTransactionsData CurrentRunningXactsData;

	ProcArrayStruct *arrayP = procArray;
	RunningTransactions CurrentRunningXacts = &CurrentRunningXactsData;
	TransactionId latestCompletedXid;
	TransactionId oldestRunningXid;
	TransactionId *xids;
	int			index;
	int			count;
	int			subcount;
	bool		suboverflowed;

	Assert(!RecoveryInProgress());

	/*
	 * Allocating space for maxProcs xids is usually overkill; numProcs would
	 * be sufficient.  But it seems better to do the malloc while not holding
	 * the lock, so we can't look at numProcs.  Likewise, we allocate much
	 * more subxip storage than is probably needed.
	 *
	 * Should only be allocated in bgwriter, since only ever executed during
	 * checkpoints.
	 */
	if (CurrentRunningXacts->xids == NULL)
	{
		/*
		 * First call
		 */
		CurrentRunningXacts->xids = (TransactionId *)
			malloc(TOTAL_MAX_CACHED_SUBXIDS * sizeof(TransactionId));
		if (CurrentRunningXacts->xids == NULL)
			ereport(ERROR,
					(errcode(ERRCODE_OUT_OF_MEMORY),
					 errmsg("out of memory")));
	}

	xids = CurrentRunningXacts->xids;

	count = subcount = 0;
	suboverflowed = false;

	/*
	 * Ensure that no xids enter or leave the procarray while we obtain
	 * snapshot.
	 */
	LWLockAcquire(ProcArrayLock, LW_SHARED);
	LWLockAcquire(XidGenLock, LW_SHARED);

	latestCompletedXid = ShmemVariableCache->latestCompletedXid;

	oldestRunningXid = ShmemVariableCache->nextXid;

	/*
	 * Spin over procArray collecting all xids and subxids.
	 */
	for (index = 0; index < arrayP->numProcs; index++)
	{
		volatile PGPROC *proc = arrayP->procs[index];
		TransactionId xid;
		int			nxids;

		/* Fetch xid just once - see GetNewTransactionId */
		xid = proc->xid;

		/*
		 * We don't need to store transactions that don't have a TransactionId
		 * yet because they will not show as running on a standby server.
		 */
		if (!TransactionIdIsValid(xid))
			continue;

		xids[count++] = xid;

		if (TransactionIdPrecedes(xid, oldestRunningXid))
			oldestRunningXid = xid;

		/*
		 * Save subtransaction XIDs. Other backends can't add or remove
		 * entries while we're holding XidGenLock.
		 */
		nxids = proc->subxids.nxids;
		if (nxids > 0)
		{
			memcpy(&xids[count], (void *) proc->subxids.xids,
				   nxids * sizeof(TransactionId));
			count += nxids;
			subcount += nxids;

			if (proc->subxids.overflowed)
				suboverflowed = true;

			/*
			 * Top-level XID of a transaction is always less than any of
			 * its subxids, so we don't need to check if any of the subxids
			 * are smaller than oldestRunningXid
			 */
		}
	}

	CurrentRunningXacts->xcnt = count;
	CurrentRunningXacts->subxid_overflow = suboverflowed;
	CurrentRunningXacts->nextXid = ShmemVariableCache->nextXid;
	CurrentRunningXacts->oldestRunningXid = oldestRunningXid;
	CurrentRunningXacts->latestCompletedXid = latestCompletedXid;

	LWLockRelease(XidGenLock);
	LWLockRelease(ProcArrayLock);

	Assert(TransactionIdIsValid(CurrentRunningXacts->nextXid));
	Assert(TransactionIdIsValid(CurrentRunningXacts->oldestRunningXid));
	Assert(TransactionIdIsNormal(CurrentRunningXacts->latestCompletedXid));

	return CurrentRunningXacts;
}

/*
 * GetTransactionsInCommit -- Get the XIDs of transactions that are committing
 *
 * Constructs an array of XIDs of transactions that are currently in commit
 * critical sections, as shown by having inCommit set in their PGPROC entries.
 *
 * *xids_p is set to a palloc'd array that should be freed by the caller.
 * The return value is the number of valid entries.
 *
 * Note that because backends set or clear inCommit without holding any lock,
 * the result is somewhat indeterminate, but we don't really care.  Even in
 * a multiprocessor with delayed writes to shared memory, it should be certain
 * that setting of inCommit will propagate to shared memory when the backend
 * takes the WALInsertLock, so we cannot fail to see an xact as inCommit if
 * it's already inserted its commit record.  Whether it takes a little while
 * for clearing of inCommit to propagate is unimportant for correctness.
 */
int
GetTransactionsInCommit(TransactionId **xids_p)
{
	ProcArrayStruct *arrayP = procArray;
	TransactionId *xids;
	int			nxids;
	int			index;

	xids = (TransactionId *) palloc(arrayP->maxProcs * sizeof(TransactionId));
	nxids = 0;

	LWLockAcquire(ProcArrayLock, LW_SHARED);

	for (index = 0; index < arrayP->numProcs; index++)
	{
		volatile PGPROC *proc = arrayP->procs[index];

		/* Fetch xid just once - see GetNewTransactionId */
		TransactionId pxid = proc->xid;

		if (proc->inCommit && TransactionIdIsValid(pxid))
			xids[nxids++] = pxid;
	}

	LWLockRelease(ProcArrayLock);

	*xids_p = xids;
	return nxids;
}

/*
 * HaveTransactionsInCommit -- Are any of the specified XIDs in commit?
 *
 * This is used with the results of GetTransactionsInCommit to see if any
 * of the specified XIDs are still in their commit critical sections.
 *
 * Note: this is O(N^2) in the number of xacts that are/were in commit, but
 * those numbers should be small enough for it not to be a problem.
 */
bool
HaveTransactionsInCommit(TransactionId *xids, int nxids)
{
	bool		result = false;
	ProcArrayStruct *arrayP = procArray;
	int			index;

	LWLockAcquire(ProcArrayLock, LW_SHARED);

	for (index = 0; index < arrayP->numProcs; index++)
	{
		volatile PGPROC *proc = arrayP->procs[index];

		/* Fetch xid just once - see GetNewTransactionId */
		TransactionId pxid = proc->xid;

		if (proc->inCommit && TransactionIdIsValid(pxid))
		{
			int			i;

			for (i = 0; i < nxids; i++)
			{
				if (xids[i] == pxid)
				{
					result = true;
					break;
				}
			}
			if (result)
				break;
		}
	}

	LWLockRelease(ProcArrayLock);

	return result;
}

/*
 * BackendPidGetProc -- get a backend's PGPROC given its PID
 *
 * Returns NULL if not found.  Note that it is up to the caller to be
 * sure that the question remains meaningful for long enough for the
 * answer to be used ...
 */
PGPROC *
BackendPidGetProc(int pid)
{
	PGPROC	   *result = NULL;
	ProcArrayStruct *arrayP = procArray;
	int			index;

	if (pid == 0)				/* never match dummy PGPROCs */
		return NULL;

	LWLockAcquire(ProcArrayLock, LW_SHARED);

	for (index = 0; index < arrayP->numProcs; index++)
	{
		PGPROC	   *proc = arrayP->procs[index];

		if (proc->pid == pid)
		{
			result = proc;
			break;
		}
	}

	LWLockRelease(ProcArrayLock);

	return result;
}

/*
 * BackendXidGetPid -- get a backend's pid given its XID
 *
 * Returns 0 if not found or it's a prepared transaction.  Note that
 * it is up to the caller to be sure that the question remains
 * meaningful for long enough for the answer to be used ...
 *
 * Only main transaction Ids are considered.  This function is mainly
 * useful for determining what backend owns a lock.
 *
 * Beware that not every xact has an XID assigned.	However, as long as you
 * only call this using an XID found on disk, you're safe.
 */
int
BackendXidGetPid(TransactionId xid)
{
	int			result = 0;
	ProcArrayStruct *arrayP = procArray;
	int			index;

	if (xid == InvalidTransactionId)	/* never match invalid xid */
		return 0;

	LWLockAcquire(ProcArrayLock, LW_SHARED);

	for (index = 0; index < arrayP->numProcs; index++)
	{
		volatile PGPROC *proc = arrayP->procs[index];

		if (proc->xid == xid)
		{
			result = proc->pid;
			break;
		}
	}

	LWLockRelease(ProcArrayLock);

	return result;
}

/*
 * IsBackendPid -- is a given pid a running backend
 */
bool
IsBackendPid(int pid)
{
	return (BackendPidGetProc(pid) != NULL);
}


/*
 * GetCurrentVirtualXIDs -- returns an array of currently active VXIDs.
 *
 * The array is palloc'd. The number of valid entries is returned into *nvxids.
 *
 * The arguments allow filtering the set of VXIDs returned.  Our own process
 * is always skipped.  In addition:
 *	If limitXmin is not InvalidTransactionId, skip processes with
 *		xmin > limitXmin.
 *	If excludeXmin0 is true, skip processes with xmin = 0.
 *	If allDbs is false, skip processes attached to other databases.
 *	If excludeVacuum isn't zero, skip processes for which
 *		(vacuumFlags & excludeVacuum) is not zero.
 *
 * Note: the purpose of the limitXmin and excludeXmin0 parameters is to
 * allow skipping backends whose oldest live snapshot is no older than
 * some snapshot we have.  Since we examine the procarray with only shared
 * lock, there are race conditions: a backend could set its xmin just after
 * we look.  Indeed, on multiprocessors with weak memory ordering, the
 * other backend could have set its xmin *before* we look.	We know however
 * that such a backend must have held shared ProcArrayLock overlapping our
 * own hold of ProcArrayLock, else we would see its xmin update.  Therefore,
 * any snapshot the other backend is taking concurrently with our scan cannot
 * consider any transactions as still running that we think are committed
 * (since backends must hold ProcArrayLock exclusive to commit).
 */
VirtualTransactionId *
GetCurrentVirtualXIDs(TransactionId limitXmin, bool excludeXmin0,
					  bool allDbs, int excludeVacuum,
					  int *nvxids)
{
	VirtualTransactionId *vxids;
	ProcArrayStruct *arrayP = procArray;
	int			count = 0;
	int			index;

	/* allocate what's certainly enough result space */
	vxids = (VirtualTransactionId *)
		palloc(sizeof(VirtualTransactionId) * arrayP->maxProcs);

	LWLockAcquire(ProcArrayLock, LW_SHARED);

	for (index = 0; index < arrayP->numProcs; index++)
	{
		volatile PGPROC *proc = arrayP->procs[index];

		if (proc == MyProc)
			continue;

		if (excludeVacuum & proc->vacuumFlags)
			continue;

		if (allDbs || proc->databaseId == MyDatabaseId)
		{
			/* Fetch xmin just once - might change on us */
			TransactionId pxmin = proc->xmin;

			if (excludeXmin0 && !TransactionIdIsValid(pxmin))
				continue;

			/*
			 * InvalidTransactionId precedes all other XIDs, so a proc that
			 * hasn't set xmin yet will not be rejected by this test.
			 */
			if (!TransactionIdIsValid(limitXmin) ||
				TransactionIdPrecedesOrEquals(pxmin, limitXmin))
			{
				VirtualTransactionId vxid;

				GET_VXID_FROM_PGPROC(vxid, *proc);
				if (VirtualTransactionIdIsValid(vxid))
					vxids[count++] = vxid;
			}
		}
	}

	LWLockRelease(ProcArrayLock);

	*nvxids = count;
	return vxids;
}

/*
 * GetConflictingVirtualXIDs -- returns an array of currently active VXIDs.
 *
 * Usage is limited to conflict resolution during recovery on standby servers.
 * limitXmin is supplied as either latestRemovedXid, or InvalidTransactionId
 * in cases where we cannot accurately determine a value for latestRemovedXid.
 *
 * If limitXmin is InvalidTransactionId then we want to kill everybody,
 * so we're not worried if they have a snapshot or not, nor does it really
 * matter what type of lock we hold.
 *
 * All callers that are checking xmins always now supply a valid and useful
 * value for limitXmin. The limitXmin is always lower than the lowest
 * numbered KnownAssignedXid that is not already a FATAL error. This is
 * because we only care about cleanup records that are cleaning up tuple
 * versions from committed transactions. In that case they will only occur
 * at the point where the record is less than the lowest running xid. That
 * allows us to say that if any backend takes a snapshot concurrently with
 * us then the conflict assessment made here would never include the snapshot
 * that is being derived. So we take LW_SHARED on the ProcArray and allow
 * concurrent snapshots when limitXmin is valid. We might think about adding
 *	 Assert(limitXmin < lowest(KnownAssignedXids))
 * but that would not be true in the case of FATAL errors lagging in array,
 * but we already know those are bogus anyway, so we skip that test.
 *
 * If dbOid is valid we skip backends attached to other databases.
 *
 * Be careful to *not* pfree the result from this function. We reuse
 * this array sufficiently often that we use malloc for the result.
 */
VirtualTransactionId *
GetConflictingVirtualXIDs(TransactionId limitXmin, Oid dbOid)
{
	static VirtualTransactionId *vxids;
	ProcArrayStruct *arrayP = procArray;
	int			count = 0;
	int			index;

	/*
	 * If not first time through, get workspace to remember main XIDs in. We
	 * malloc it permanently to avoid repeated palloc/pfree overhead. Allow
	 * result space, remembering room for a terminator.
	 */
	if (vxids == NULL)
	{
		vxids = (VirtualTransactionId *)
			malloc(sizeof(VirtualTransactionId) * (arrayP->maxProcs + 1));
		if (vxids == NULL)
			ereport(ERROR,
					(errcode(ERRCODE_OUT_OF_MEMORY),
					 errmsg("out of memory")));
	}

	LWLockAcquire(ProcArrayLock, LW_SHARED);

	for (index = 0; index < arrayP->numProcs; index++)
	{
		volatile PGPROC *proc = arrayP->procs[index];

		/* Exclude prepared transactions */
		if (proc->pid == 0)
			continue;

		if (!OidIsValid(dbOid) ||
			proc->databaseId == dbOid)
		{
			/* Fetch xmin just once - can't change on us, but good coding */
			TransactionId pxmin = proc->xmin;

			/*
			 * We ignore an invalid pxmin because this means that backend has
			 * no snapshot and cannot get another one while we hold exclusive
			 * lock.
			 */
			if (!TransactionIdIsValid(limitXmin) ||
				(TransactionIdIsValid(pxmin) && !TransactionIdFollows(pxmin, limitXmin)))
			{
				VirtualTransactionId vxid;

				GET_VXID_FROM_PGPROC(vxid, *proc);
				if (VirtualTransactionIdIsValid(vxid))
					vxids[count++] = vxid;
			}
		}
	}

	LWLockRelease(ProcArrayLock);

	/* add the terminator */
	vxids[count].backendId = InvalidBackendId;
	vxids[count].localTransactionId = InvalidLocalTransactionId;

	return vxids;
}

/*
 * CancelVirtualTransaction - used in recovery conflict processing
 *
 * Returns pid of the process signaled, or 0 if not found.
 */
pid_t
CancelVirtualTransaction(VirtualTransactionId vxid, ProcSignalReason sigmode)
{
	ProcArrayStruct *arrayP = procArray;
	int			index;
	pid_t		pid = 0;

	LWLockAcquire(ProcArrayLock, LW_SHARED);

	for (index = 0; index < arrayP->numProcs; index++)
	{
		VirtualTransactionId procvxid;
		PGPROC	   *proc = arrayP->procs[index];

		GET_VXID_FROM_PGPROC(procvxid, *proc);

		if (procvxid.backendId == vxid.backendId &&
			procvxid.localTransactionId == vxid.localTransactionId)
		{
			proc->recoveryConflictPending = true;
			pid = proc->pid;
			if (pid != 0)
			{
				/*
				 * Kill the pid if it's still here. If not, that's what we
				 * wanted so ignore any errors.
				 */
				(void) SendProcSignal(pid, sigmode, vxid.backendId);
			}
			break;
		}
	}

	LWLockRelease(ProcArrayLock);

	return pid;
}

/*
 * CountActiveBackends --- count backends (other than myself) that are in
 *		active transactions.  This is used as a heuristic to decide if
 *		a pre-XLOG-flush delay is worthwhile during commit.
 *
 * Do not count backends that are blocked waiting for locks, since they are
 * not going to get to run until someone else commits.
 */
int
CountActiveBackends(void)
{
	ProcArrayStruct *arrayP = procArray;
	int			count = 0;
	int			index;

	/*
	 * Note: for speed, we don't acquire ProcArrayLock.  This is a little bit
	 * bogus, but since we are only testing fields for zero or nonzero, it
	 * should be OK.  The result is only used for heuristic purposes anyway...
	 */
	for (index = 0; index < arrayP->numProcs; index++)
	{
		volatile PGPROC *proc = arrayP->procs[index];

		/*
		 * Since we're not holding a lock, need to check that the pointer is
		 * valid. Someone holding the lock could have incremented numProcs
		 * already, but not yet inserted a valid pointer to the array.
		 *
		 * If someone just decremented numProcs, 'proc' could also point to a
		 * PGPROC entry that's no longer in the array. It still points to a
		 * PGPROC struct, though, because freed PGPPROC entries just go to the
		 * free list and are recycled. Its contents are nonsense in that case,
		 * but that's acceptable for this function.
		 */
		if (proc == NULL)
			continue;

		if (proc == MyProc)
			continue;			/* do not count myself */
		if (proc->pid == 0)
			continue;			/* do not count prepared xacts */
		if (proc->xid == InvalidTransactionId)
			continue;			/* do not count if no XID assigned */
		if (proc->waitLock != NULL)
			continue;			/* do not count if blocked on a lock */
		count++;
	}

	return count;
}

/*
 * CountDBBackends --- count backends that are using specified database
 */
int
CountDBBackends(Oid databaseid)
{
	ProcArrayStruct *arrayP = procArray;
	int			count = 0;
	int			index;

	LWLockAcquire(ProcArrayLock, LW_SHARED);

	for (index = 0; index < arrayP->numProcs; index++)
	{
		volatile PGPROC *proc = arrayP->procs[index];

		if (proc->pid == 0)
			continue;			/* do not count prepared xacts */
		if (!OidIsValid(databaseid) ||
			proc->databaseId == databaseid)
			count++;
	}

	LWLockRelease(ProcArrayLock);

	return count;
}

/*
 * CancelDBBackends --- cancel backends that are using specified database
 */
void
CancelDBBackends(Oid databaseid, ProcSignalReason sigmode, bool conflictPending)
{
	ProcArrayStruct *arrayP = procArray;
	int			index;
	pid_t		pid = 0;

	/* tell all backends to die */
	LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);

	for (index = 0; index < arrayP->numProcs; index++)
	{
		volatile PGPROC *proc = arrayP->procs[index];

		if (databaseid == InvalidOid || proc->databaseId == databaseid)
		{
			VirtualTransactionId procvxid;

			GET_VXID_FROM_PGPROC(procvxid, *proc);

			proc->recoveryConflictPending = conflictPending;
			pid = proc->pid;
			if (pid != 0)
			{
				/*
				 * Kill the pid if it's still here. If not, that's what we
				 * wanted so ignore any errors.
				 */
				(void) SendProcSignal(pid, sigmode, procvxid.backendId);
			}
		}
	}

	LWLockRelease(ProcArrayLock);
}

/*
 * CountUserBackends --- count backends that are used by specified user
 */
int
CountUserBackends(Oid roleid)
{
	ProcArrayStruct *arrayP = procArray;
	int			count = 0;
	int			index;

	LWLockAcquire(ProcArrayLock, LW_SHARED);

	for (index = 0; index < arrayP->numProcs; index++)
	{
		volatile PGPROC *proc = arrayP->procs[index];

		if (proc->pid == 0)
			continue;			/* do not count prepared xacts */
		if (proc->roleId == roleid)
			count++;
	}

	LWLockRelease(ProcArrayLock);

	return count;
}

/*
 * CountOtherDBBackends -- check for other backends running in the given DB
 *
 * If there are other backends in the DB, we will wait a maximum of 5 seconds
 * for them to exit.  Autovacuum backends are encouraged to exit early by
 * sending them SIGTERM, but normal user backends are just waited for.
 *
 * The current backend is always ignored; it is caller's responsibility to
 * check whether the current backend uses the given DB, if it's important.
 *
 * Returns TRUE if there are (still) other backends in the DB, FALSE if not.
 * Also, *nbackends and *nprepared are set to the number of other backends
 * and prepared transactions in the DB, respectively.
 *
 * This function is used to interlock DROP DATABASE and related commands
 * against there being any active backends in the target DB --- dropping the
 * DB while active backends remain would be a Bad Thing.  Note that we cannot
 * detect here the possibility of a newly-started backend that is trying to
 * connect to the doomed database, so additional interlocking is needed during
 * backend startup.  The caller should normally hold an exclusive lock on the
 * target DB before calling this, which is one reason we mustn't wait
 * indefinitely.
 */
bool
CountOtherDBBackends(Oid databaseId, int *nbackends, int *nprepared)
{
	ProcArrayStruct *arrayP = procArray;

#define MAXAUTOVACPIDS	10		/* max autovacs to SIGTERM per iteration */
	int			autovac_pids[MAXAUTOVACPIDS];
	int			tries;

	/* 50 tries with 100ms sleep between tries makes 5 sec total wait */
	for (tries = 0; tries < 50; tries++)
	{
		int			nautovacs = 0;
		bool		found = false;
		int			index;

		CHECK_FOR_INTERRUPTS();

		*nbackends = *nprepared = 0;

		LWLockAcquire(ProcArrayLock, LW_SHARED);

		for (index = 0; index < arrayP->numProcs; index++)
		{
			volatile PGPROC *proc = arrayP->procs[index];

			if (proc->databaseId != databaseId)
				continue;
			if (proc == MyProc)
				continue;

			found = true;

			if (proc->pid == 0)
				(*nprepared)++;
			else
			{
				(*nbackends)++;
				if ((proc->vacuumFlags & PROC_IS_AUTOVACUUM) &&
					nautovacs < MAXAUTOVACPIDS)
					autovac_pids[nautovacs++] = proc->pid;
			}
		}

		LWLockRelease(ProcArrayLock);

		if (!found)
			return false;		/* no conflicting backends, so done */

		/*
		 * Send SIGTERM to any conflicting autovacuums before sleeping. We
		 * postpone this step until after the loop because we don't want to
		 * hold ProcArrayLock while issuing kill(). We have no idea what might
		 * block kill() inside the kernel...
		 */
		for (index = 0; index < nautovacs; index++)
			(void) kill(autovac_pids[index], SIGTERM);	/* ignore any error */

		/* sleep, then try again */
		pg_usleep(100 * 1000L); /* 100ms */
	}

	return true;				/* timed out, still conflicts */
}


#define XidCacheRemove(i) \
	do { \
		MyProc->subxids.xids[i] = MyProc->subxids.xids[MyProc->subxids.nxids - 1]; \
		MyProc->subxids.nxids--; \
	} while (0)

/*
 * XidCacheRemoveRunningXids
 *
 * Remove a bunch of TransactionIds from the list of known-running
 * subtransactions for my backend.	Both the specified xid and those in
 * the xids[] array (of length nxids) are removed from the subxids cache.
 * latestXid must be the latest XID among the group.
 */
void
XidCacheRemoveRunningXids(TransactionId xid,
						  int nxids, const TransactionId *xids,
						  TransactionId latestXid)
{
	int			i,
				j;

	Assert(TransactionIdIsValid(xid));

	/*
	 * We must hold ProcArrayLock exclusively in order to remove transactions
	 * from the PGPROC array.  (See src/backend/access/transam/README.)  It's
	 * possible this could be relaxed since we know this routine is only used
	 * to abort subtransactions, but pending closer analysis we'd best be
	 * conservative.
	 */
	LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);

	/*
	 * Under normal circumstances xid and xids[] will be in increasing order,
	 * as will be the entries in subxids.  Scan backwards to avoid O(N^2)
	 * behavior when removing a lot of xids.
	 */
	for (i = nxids - 1; i >= 0; i--)
	{
		TransactionId anxid = xids[i];

		for (j = MyProc->subxids.nxids - 1; j >= 0; j--)
		{
			if (TransactionIdEquals(MyProc->subxids.xids[j], anxid))
			{
				XidCacheRemove(j);
				break;
			}
		}

		/*
		 * Ordinarily we should have found it, unless the cache has
		 * overflowed. However it's also possible for this routine to be
		 * invoked multiple times for the same subtransaction, in case of an
		 * error during AbortSubTransaction.  So instead of Assert, emit a
		 * debug warning.
		 */
		if (j < 0 && !MyProc->subxids.overflowed)
			elog(WARNING, "did not find subXID %u in MyProc", anxid);
	}

	for (j = MyProc->subxids.nxids - 1; j >= 0; j--)
	{
		if (TransactionIdEquals(MyProc->subxids.xids[j], xid))
		{
			XidCacheRemove(j);
			break;
		}
	}
	/* Ordinarily we should have found it, unless the cache has overflowed */
	if (j < 0 && !MyProc->subxids.overflowed)
		elog(WARNING, "did not find subXID %u in MyProc", xid);

	/* Also advance global latestCompletedXid while holding the lock */
	if (TransactionIdPrecedes(ShmemVariableCache->latestCompletedXid,
							  latestXid))
		ShmemVariableCache->latestCompletedXid = latestXid;

	LWLockRelease(ProcArrayLock);
}

#ifdef XIDCACHE_DEBUG

/*
 * Print stats about effectiveness of XID cache
 */
static void
DisplayXidCache(void)
{
	fprintf(stderr,
			"XidCache: xmin: %ld, known: %ld, myxact: %ld, latest: %ld, mainxid: %ld, childxid: %ld, knownassigned: %ld, nooflo: %ld, slow: %ld\n",
			xc_by_recent_xmin,
			xc_by_known_xact,
			xc_by_my_xact,
			xc_by_latest_xid,
			xc_by_main_xid,
			xc_by_child_xid,
			xc_by_known_assigned,
			xc_no_overflow,
			xc_slow_answer);
}
#endif   /* XIDCACHE_DEBUG */


/* ----------------------------------------------
 *		KnownAssignedTransactions sub-module
 * ----------------------------------------------
 */

/*
 * In Hot Standby mode, we maintain a list of transactions that are (or were)
 * running in the master at the current point in WAL.  These XIDs must be
 * treated as running by standby transactions, even though they are not in
 * the standby server's PGPROC array.
 *
 * We record all XIDs that we know have been assigned.	That includes all the
 * XIDs seen in WAL records, plus all unobserved XIDs that we can deduce have
 * been assigned.  We can deduce the existence of unobserved XIDs because we
 * know XIDs are assigned in sequence, with no gaps.  The KnownAssignedXids
 * list expands as new XIDs are observed or inferred, and contracts when
 * transaction completion records arrive.
 *
 * During hot standby we do not fret too much about the distinction between
 * top-level XIDs and subtransaction XIDs. We store both together in the
 * KnownAssignedXids list.	In backends, this is copied into snapshots in
 * GetSnapshotData(), taking advantage of the fact that XidInMVCCSnapshot()
 * doesn't care about the distinction either.  Subtransaction XIDs are
 * effectively treated as top-level XIDs and in the typical case pg_subtrans
 * links are *not* maintained (which does not affect visibility).
 *
 * We have room in KnownAssignedXids and in snapshots to hold maxProcs *
 * (1 + PGPROC_MAX_CACHED_SUBXIDS) XIDs, so every master transaction must
 * report its subtransaction XIDs in a WAL XLOG_XACT_ASSIGNMENT record at
 * least every PGPROC_MAX_CACHED_SUBXIDS.  When we receive one of these
 * records, we mark the subXIDs as children of the top XID in pg_subtrans,
 * and then remove them from KnownAssignedXids.  This prevents overflow of
 * KnownAssignedXids and snapshots, at the cost that status checks for these
 * subXIDs will take a slower path through TransactionIdIsInProgress().
 * This means that KnownAssignedXids is not necessarily complete for subXIDs,
 * though it should be complete for top-level XIDs; this is the same situation
 * that holds with respect to the PGPROC entries in normal running.
 *
 * When we throw away subXIDs from KnownAssignedXids, we need to keep track of
 * that, similarly to tracking overflow of a PGPROC's subxids array.  We do
 * that by remembering the lastOverflowedXID, ie the last thrown-away subXID.
 * As long as that is within the range of interesting XIDs, we have to assume
 * that subXIDs are missing from snapshots.  (Note that subXID overflow occurs
 * on primary when 65th subXID arrives, whereas on standby it occurs when 64th
 * subXID arrives - that is not an error.)
 *
 * Should a backend on primary somehow disappear before it can write an abort
 * record, then we just leave those XIDs in KnownAssignedXids. They actually
 * aborted but we think they were running; the distinction is irrelevant
 * because either way any changes done by the transaction are not visible to
 * backends in the standby.  We prune KnownAssignedXids when
 * XLOG_RUNNING_XACTS arrives, to forestall possible overflow of the
 * array due to such dead XIDs.
 */

/*
 * RecordKnownAssignedTransactionIds
 *		Record the given XID in KnownAssignedXids, as well as any preceding
 *		unobserved XIDs.
 *
 * RecordKnownAssignedTransactionIds() should be run for *every* WAL record
 * type apart from XLOG_RUNNING_XACTS (since that initialises the first
 * snapshot so that RecordKnownAssignedTransactionIds() can be called). Must
 * be called for each record after we have executed StartupCLOG() et al,
 * since we must ExtendCLOG() etc..
 *
 * Called during recovery in analogy with and in place of GetNewTransactionId()
 */
void
RecordKnownAssignedTransactionIds(TransactionId xid)
{
	Assert(standbyState >= STANDBY_INITIALIZED);
	Assert(TransactionIdIsValid(latestObservedXid));
	Assert(TransactionIdIsValid(xid));

	elog(trace_recovery(DEBUG4), "record known xact %u latestObservedXid %u",
		 xid, latestObservedXid);

	/*
	 * When a newly observed xid arrives, it is frequently the case that it is
	 * *not* the next xid in sequence. When this occurs, we must treat the
	 * intervening xids as running also.
	 */
	if (TransactionIdFollows(xid, latestObservedXid))
	{
		TransactionId next_expected_xid;

		/*
		 * Extend clog and subtrans like we do in GetNewTransactionId() during
		 * normal operation using individual extend steps. Typical case
		 * requires almost no activity.
		 */
		next_expected_xid = latestObservedXid;
		TransactionIdAdvance(next_expected_xid);
		while (TransactionIdPrecedesOrEquals(next_expected_xid, xid))
		{
			ExtendCLOG(next_expected_xid);
			ExtendSUBTRANS(next_expected_xid);

			TransactionIdAdvance(next_expected_xid);
		}

		/*
		 * Add the new xids onto the KnownAssignedXids array.
		 */
		next_expected_xid = latestObservedXid;
		TransactionIdAdvance(next_expected_xid);
		KnownAssignedXidsAdd(next_expected_xid, xid, false);

		/*
		 * Now we can advance latestObservedXid
		 */
		latestObservedXid = xid;

		/* ShmemVariableCache->nextXid must be beyond any observed xid */
		next_expected_xid = latestObservedXid;
		TransactionIdAdvance(next_expected_xid);
		ShmemVariableCache->nextXid = next_expected_xid;
	}
}

/*
 * ExpireTreeKnownAssignedTransactionIds
 *		Remove the given XIDs from KnownAssignedXids.
 *
 * Called during recovery in analogy with and in place of ProcArrayEndTransaction()
 */
void
ExpireTreeKnownAssignedTransactionIds(TransactionId xid, int nsubxids,
							   TransactionId *subxids, TransactionId max_xid)
{
	Assert(standbyState >= STANDBY_INITIALIZED);

	/*
	 * Uses same locking as transaction commit
	 */
	LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);

	KnownAssignedXidsRemoveTree(xid, nsubxids, subxids);

	/* As in ProcArrayEndTransaction, advance latestCompletedXid */
	if (TransactionIdPrecedes(ShmemVariableCache->latestCompletedXid,
							  max_xid))
		ShmemVariableCache->latestCompletedXid = max_xid;

	LWLockRelease(ProcArrayLock);
}

/*
 * ExpireAllKnownAssignedTransactionIds
 *		Remove all entries in KnownAssignedXids
 */
void
ExpireAllKnownAssignedTransactionIds(void)
{
	LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);
	KnownAssignedXidsRemovePreceding(InvalidTransactionId);
	LWLockRelease(ProcArrayLock);
}

/*
 * ExpireOldKnownAssignedTransactionIds
 *		Remove KnownAssignedXids entries preceding the given XID
 */
void
ExpireOldKnownAssignedTransactionIds(TransactionId xid)
{
	LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);
	KnownAssignedXidsRemovePreceding(xid);
	LWLockRelease(ProcArrayLock);
}


/*
 * Private module functions to manipulate KnownAssignedXids
 *
 * There are 5 main uses of the KnownAssignedXids data structure:
 *
 *	* backends taking snapshots - all valid XIDs need to be copied out
 *	* backends seeking to determine presence of a specific XID
 *	* startup process adding new known-assigned XIDs
 *	* startup process removing specific XIDs as transactions end
 *	* startup process pruning array when special WAL records arrive
 *
 * This data structure is known to be a hot spot during Hot Standby, so we
 * go to some lengths to make these operations as efficient and as concurrent
 * as possible.
 *
 * The XIDs are stored in an array in sorted order --- TransactionIdPrecedes
 * order, to be exact --- to allow binary search for specific XIDs.  Note:
 * in general TransactionIdPrecedes would not provide a total order, but
 * we know that the entries present at any instant should not extend across
 * a large enough fraction of XID space to wrap around (the master would
 * shut down for fear of XID wrap long before that happens).  So it's OK to
 * use TransactionIdPrecedes as a binary-search comparator.
 *
 * It's cheap to maintain the sortedness during insertions, since new known
 * XIDs are always reported in XID order; we just append them at the right.
 *
 * To keep individual deletions cheap, we need to allow gaps in the array.
 * This is implemented by marking array elements as valid or invalid using
 * the parallel boolean array KnownAssignedXidsValid[].  A deletion is done
 * by setting KnownAssignedXidsValid[i] to false, *without* clearing the
 * XID entry itself.  This preserves the property that the XID entries are
 * sorted, so we can do binary searches easily.  Periodically we compress
 * out the unused entries; that's much cheaper than having to compress the
 * array immediately on every deletion.
 *
 * The actually valid items in KnownAssignedXids[] and KnownAssignedXidsValid[]
 * are those with indexes tail <= i < head; items outside this subscript range
 * have unspecified contents.  When head reaches the end of the array, we
 * force compression of unused entries rather than wrapping around, since
 * allowing wraparound would greatly complicate the search logic.  We maintain
 * an explicit tail pointer so that pruning of old XIDs can be done without
 * immediately moving the array contents.  In most cases only a small fraction
 * of the array contains valid entries at any instant.
 *
 * Although only the startup process can ever change the KnownAssignedXids
 * data structure, we still need interlocking so that standby backends will
 * not observe invalid intermediate states.  The convention is that backends
 * must hold shared ProcArrayLock to examine the array.  To remove XIDs from
 * the array, the startup process must hold ProcArrayLock exclusively, for
 * the usual transactional reasons (compare commit/abort of a transaction
 * during normal running).	Compressing unused entries out of the array
 * likewise requires exclusive lock.  To add XIDs to the array, we just insert
 * them into slots to the right of the head pointer and then advance the head
 * pointer.  This wouldn't require any lock at all, except that on machines
 * with weak memory ordering we need to be careful that other processors
 * see the array element changes before they see the head pointer change.
 * We handle this by using a spinlock to protect reads and writes of the
 * head/tail pointers.	(We could dispense with the spinlock if we were to
 * create suitable memory access barrier primitives and use those instead.)
 * The spinlock must be taken to read or write the head/tail pointers unless
 * the caller holds ProcArrayLock exclusively.
 *
 * Algorithmic analysis:
 *
 * If we have a maximum of M slots, with N XIDs currently spread across
 * S elements then we have N <= S <= M always.
 *
 *	* Adding a new XID is O(1) and needs little locking (unless compression
 *		must happen)
 *	* Compressing the array is O(S) and requires exclusive lock
 *	* Removing an XID is O(logS) and requires exclusive lock
 *	* Taking a snapshot is O(S) and requires shared lock
 *	* Checking for an XID is O(logS) and requires shared lock
 *
 * In comparison, using a hash table for KnownAssignedXids would mean that
 * taking snapshots would be O(M). If we can maintain S << M then the
 * sorted array technique will deliver significantly faster snapshots.
 * If we try to keep S too small then we will spend too much time compressing,
 * so there is an optimal point for any workload mix. We use a heuristic to
 * decide when to compress the array, though trimming also helps reduce
 * frequency of compressing. The heuristic requires us to track the number of
 * currently valid XIDs in the array.
 */


/*
 * Compress KnownAssignedXids by shifting valid data down to the start of the
 * array, removing any gaps.
 *
 * A compression step is forced if "force" is true, otherwise we do it
 * only if a heuristic indicates it's a good time to do it.
 *
 * Caller must hold ProcArrayLock in exclusive mode.
 */
static void
KnownAssignedXidsCompress(bool force)
{
	/* use volatile pointer to prevent code rearrangement */
	volatile ProcArrayStruct *pArray = procArray;
	int			head,
				tail;
	int			compress_index;
	int			i;

	/* no spinlock required since we hold ProcArrayLock exclusively */
	head = pArray->headKnownAssignedXids;
	tail = pArray->tailKnownAssignedXids;

	if (!force)
	{
		/*
		 * If we can choose how much to compress, use a heuristic to avoid
		 * compressing too often or not often enough.
		 *
		 * Heuristic is if we have a large enough current spread and less than
		 * 50% of the elements are currently in use, then compress. This
		 * should ensure we compress fairly infrequently. We could compress
		 * less often though the virtual array would spread out more and
		 * snapshots would become more expensive.
		 */
		int			nelements = head - tail;

		if (nelements < 4 * PROCARRAY_MAXPROCS ||
			nelements < 2 * pArray->numKnownAssignedXids)
			return;
	}

	/*
	 * We compress the array by reading the valid values from tail to head,
	 * re-aligning data to 0th element.
	 */
	compress_index = 0;
	for (i = tail; i < head; i++)
	{
		if (KnownAssignedXidsValid[i])
		{
			KnownAssignedXids[compress_index] = KnownAssignedXids[i];
			KnownAssignedXidsValid[compress_index] = true;
			compress_index++;
		}
	}

	pArray->tailKnownAssignedXids = 0;
	pArray->headKnownAssignedXids = compress_index;
}

/*
 * Add xids into KnownAssignedXids at the head of the array.
 *
 * xids from from_xid to to_xid, inclusive, are added to the array.
 *
 * If exclusive_lock is true then caller already holds ProcArrayLock in
 * exclusive mode, so we need no extra locking here.  Else caller holds no
 * lock, so we need to be sure we maintain sufficient interlocks against
 * concurrent readers.	(Only the startup process ever calls this, so no need
 * to worry about concurrent writers.)
 */
static void
KnownAssignedXidsAdd(TransactionId from_xid, TransactionId to_xid,
					 bool exclusive_lock)
{
	/* use volatile pointer to prevent code rearrangement */
	volatile ProcArrayStruct *pArray = procArray;
	TransactionId next_xid;
	int			head,
				tail;
	int			nxids;
	int			i;

	Assert(TransactionIdPrecedesOrEquals(from_xid, to_xid));

	/*
	 * Calculate how many array slots we'll need.  Normally this is cheap; in
	 * the unusual case where the XIDs cross the wrap point, we do it the hard
	 * way.
	 */
	if (to_xid >= from_xid)
		nxids = to_xid - from_xid + 1;
	else
	{
		nxids = 1;
		next_xid = from_xid;
		while (TransactionIdPrecedes(next_xid, to_xid))
		{
			nxids++;
			TransactionIdAdvance(next_xid);
		}
	}

	/*
	 * Since only the startup process modifies the head/tail pointers, we
	 * don't need a lock to read them here.
	 */
	head = pArray->headKnownAssignedXids;
	tail = pArray->tailKnownAssignedXids;

	Assert(head >= 0 && head <= pArray->maxKnownAssignedXids);
	Assert(tail >= 0 && tail < pArray->maxKnownAssignedXids);

	/*
	 * Verify that insertions occur in TransactionId sequence.	Note that even
	 * if the last existing element is marked invalid, it must still have a
	 * correctly sequenced XID value.
	 */
	if (head > tail &&
		TransactionIdFollowsOrEquals(KnownAssignedXids[head - 1], from_xid))
	{
		KnownAssignedXidsDisplay(LOG);
		elog(ERROR, "out-of-order XID insertion in KnownAssignedXids");
	}

	/*
	 * If our xids won't fit in the remaining space, compress out free space
	 */
	if (head + nxids > pArray->maxKnownAssignedXids)
	{
		/* must hold lock to compress */
		if (!exclusive_lock)
			LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);

		KnownAssignedXidsCompress(true);

		head = pArray->headKnownAssignedXids;
		/* note: we no longer care about the tail pointer */

		if (!exclusive_lock)
			LWLockRelease(ProcArrayLock);

		/*
		 * If it still won't fit then we're out of memory
		 */
		if (head + nxids > pArray->maxKnownAssignedXids)
			elog(ERROR, "too many KnownAssignedXids");
	}

	/* Now we can insert the xids into the space starting at head */
	next_xid = from_xid;
	for (i = 0; i < nxids; i++)
	{
		KnownAssignedXids[head] = next_xid;
		KnownAssignedXidsValid[head] = true;
		TransactionIdAdvance(next_xid);
		head++;
	}

	/* Adjust count of number of valid entries */
	pArray->numKnownAssignedXids += nxids;

	/*
	 * Now update the head pointer.  We use a spinlock to protect this
	 * pointer, not because the update is likely to be non-atomic, but to
	 * ensure that other processors see the above array updates before they
	 * see the head pointer change.
	 *
	 * If we're holding ProcArrayLock exclusively, there's no need to take the
	 * spinlock.
	 */
	if (exclusive_lock)
		pArray->headKnownAssignedXids = head;
	else
	{
		SpinLockAcquire(&pArray->known_assigned_xids_lck);
		pArray->headKnownAssignedXids = head;
		SpinLockRelease(&pArray->known_assigned_xids_lck);
	}
}

/*
 * KnownAssignedXidsSearch
 *
 * Searches KnownAssignedXids for a specific xid and optionally removes it.
 * Returns true if it was found, false if not.
 *
 * Caller must hold ProcArrayLock in shared or exclusive mode.
 * Exclusive lock must be held for remove = true.
 */
static bool
KnownAssignedXidsSearch(TransactionId xid, bool remove)
{
	/* use volatile pointer to prevent code rearrangement */
	volatile ProcArrayStruct *pArray = procArray;
	int			first,
				last;
	int			head;
	int			tail;
	int			result_index = -1;

	if (remove)
	{
		/* we hold ProcArrayLock exclusively, so no need for spinlock */
		tail = pArray->tailKnownAssignedXids;
		head = pArray->headKnownAssignedXids;
	}
	else
	{
		/* take spinlock to ensure we see up-to-date array contents */
		SpinLockAcquire(&pArray->known_assigned_xids_lck);
		tail = pArray->tailKnownAssignedXids;
		head = pArray->headKnownAssignedXids;
		SpinLockRelease(&pArray->known_assigned_xids_lck);
	}

	/*
	 * Standard binary search.	Note we can ignore the KnownAssignedXidsValid
	 * array here, since even invalid entries will contain sorted XIDs.
	 */
	first = tail;
	last = head - 1;
	while (first <= last)
	{
		int			mid_index;
		TransactionId mid_xid;

		mid_index = (first + last) / 2;
		mid_xid = KnownAssignedXids[mid_index];

		if (xid == mid_xid)
		{
			result_index = mid_index;
			break;
		}
		else if (TransactionIdPrecedes(xid, mid_xid))
			last = mid_index - 1;
		else
			first = mid_index + 1;
	}

	if (result_index < 0)
		return false;			/* not in array */

	if (!KnownAssignedXidsValid[result_index])
		return false;			/* in array, but invalid */

	if (remove)
	{
		KnownAssignedXidsValid[result_index] = false;

		pArray->numKnownAssignedXids--;
		Assert(pArray->numKnownAssignedXids >= 0);

		/*
		 * If we're removing the tail element then advance tail pointer over
		 * any invalid elements.  This will speed future searches.
		 */
		if (result_index == tail)
		{
			tail++;
			while (tail < head && !KnownAssignedXidsValid[tail])
				tail++;
			if (tail >= head)
			{
				/* Array is empty, so we can reset both pointers */
				pArray->headKnownAssignedXids = 0;
				pArray->tailKnownAssignedXids = 0;
			}
			else
			{
				pArray->tailKnownAssignedXids = tail;
			}
		}
	}

	return true;
}

/*
 * Is the specified XID present in KnownAssignedXids[]?
 *
 * Caller must hold ProcArrayLock in shared or exclusive mode.
 */
static bool
KnownAssignedXidExists(TransactionId xid)
{
	Assert(TransactionIdIsValid(xid));

	return KnownAssignedXidsSearch(xid, false);
}

/*
 * Remove the specified XID from KnownAssignedXids[].
 *
 * Caller must hold ProcArrayLock in exclusive mode.
 */
static void
KnownAssignedXidsRemove(TransactionId xid)
{
	Assert(TransactionIdIsValid(xid));

	elog(trace_recovery(DEBUG4), "remove KnownAssignedXid %u", xid);

	/*
	 * Note: we cannot consider it an error to remove an XID that's not
	 * present.  We intentionally remove subxact IDs while processing
	 * XLOG_XACT_ASSIGNMENT, to avoid array overflow.  Then those XIDs will be
	 * removed again when the top-level xact commits or aborts.
	 *
	 * It might be possible to track such XIDs to distinguish this case from
	 * actual errors, but it would be complicated and probably not worth it.
	 * So, just ignore the search result.
	 */
	(void) KnownAssignedXidsSearch(xid, true);
}

/*
 * KnownAssignedXidsRemoveTree
 *		Remove xid (if it's not InvalidTransactionId) and all the subxids.
 *
 * Caller must hold ProcArrayLock in exclusive mode.
 */
static void
KnownAssignedXidsRemoveTree(TransactionId xid, int nsubxids,
							TransactionId *subxids)
{
	int			i;

	if (TransactionIdIsValid(xid))
		KnownAssignedXidsRemove(xid);

	for (i = 0; i < nsubxids; i++)
		KnownAssignedXidsRemove(subxids[i]);

	/* Opportunistically compress the array */
	KnownAssignedXidsCompress(false);
}

/*
 * Prune KnownAssignedXids up to, but *not* including xid. If xid is invalid
 * then clear the whole table.
 *
 * Caller must hold ProcArrayLock in exclusive mode.
 */
static void
KnownAssignedXidsRemovePreceding(TransactionId removeXid)
{
	/* use volatile pointer to prevent code rearrangement */
	volatile ProcArrayStruct *pArray = procArray;
	int			count = 0;
	int			head,
				tail,
				i;

	if (!TransactionIdIsValid(removeXid))
	{
		elog(trace_recovery(DEBUG4), "removing all KnownAssignedXids");
		pArray->numKnownAssignedXids = 0;
		pArray->headKnownAssignedXids = pArray->tailKnownAssignedXids = 0;
		return;
	}

	elog(trace_recovery(DEBUG4), "prune KnownAssignedXids to %u", removeXid);

	/*
	 * Mark entries invalid starting at the tail.  Since array is sorted, we
	 * can stop as soon as we reach a entry >= removeXid.
	 */
	tail = pArray->tailKnownAssignedXids;
	head = pArray->headKnownAssignedXids;

	for (i = tail; i < head; i++)
	{
		if (KnownAssignedXidsValid[i])
		{
			TransactionId knownXid = KnownAssignedXids[i];

			if (TransactionIdFollowsOrEquals(knownXid, removeXid))
				break;

			if (!StandbyTransactionIdIsPrepared(knownXid))
			{
				KnownAssignedXidsValid[i] = false;
				count++;
			}
		}
	}

	pArray->numKnownAssignedXids -= count;
	Assert(pArray->numKnownAssignedXids >= 0);

	/*
	 * Advance the tail pointer if we've marked the tail item invalid.
	 */
	for (i = tail; i < head; i++)
	{
		if (KnownAssignedXidsValid[i])
			break;
	}
	if (i >= head)
	{
		/* Array is empty, so we can reset both pointers */
		pArray->headKnownAssignedXids = 0;
		pArray->tailKnownAssignedXids = 0;
	}
	else
	{
		pArray->tailKnownAssignedXids = i;
	}

	/* Opportunistically compress the array */
	KnownAssignedXidsCompress(false);
}

/*
 * KnownAssignedXidsGet - Get an array of xids by scanning KnownAssignedXids.
 * We filter out anything >= xmax.
 *
 * Returns the number of XIDs stored into xarray[].  Caller is responsible
 * that array is large enough.
 *
 * Caller must hold ProcArrayLock in (at least) shared mode.
 */
static int
KnownAssignedXidsGet(TransactionId *xarray, TransactionId xmax)
{
	TransactionId xtmp = InvalidTransactionId;

	return KnownAssignedXidsGetAndSetXmin(xarray, &xtmp, xmax);
}

/*
 * KnownAssignedXidsGetAndSetXmin - as KnownAssignedXidsGet, plus
 * we reduce *xmin to the lowest xid value seen if not already lower.
 *
 * Caller must hold ProcArrayLock in (at least) shared mode.
 */
static int
KnownAssignedXidsGetAndSetXmin(TransactionId *xarray, TransactionId *xmin,
							   TransactionId xmax)
{
	/* use volatile pointer to prevent code rearrangement */
	volatile ProcArrayStruct *pArray = procArray;
	int			count = 0;
	int			head,
				tail;
	int			i;

	/*
	 * Fetch head just once, since it may change while we loop. We can stop
	 * once we reach the initially seen head, since we are certain that an xid
	 * cannot enter and then leave the array while we hold ProcArrayLock.  We
	 * might miss newly-added xids, but they should be >= xmax so irrelevant
	 * anyway.
	 *
	 * Must take spinlock to ensure we see up-to-date array contents.
	 */
	SpinLockAcquire(&pArray->known_assigned_xids_lck);
	tail = pArray->tailKnownAssignedXids;
	head = pArray->headKnownAssignedXids;
	SpinLockRelease(&pArray->known_assigned_xids_lck);

	for (i = tail; i < head; i++)
	{
		/* Skip any gaps in the array */
		if (KnownAssignedXidsValid[i])
		{
			TransactionId knownXid = KnownAssignedXids[i];

			/*
			 * Update xmin if required.  Only the first XID need be checked,
			 * since the array is sorted.
			 */
			if (count == 0 &&
				TransactionIdPrecedes(knownXid, *xmin))
				*xmin = knownXid;

			/*
			 * Filter out anything >= xmax, again relying on sorted property
			 * of array.
			 */
			if (TransactionIdIsValid(xmax) &&
				TransactionIdFollowsOrEquals(knownXid, xmax))
				break;

			/* Add knownXid into output array */
			xarray[count++] = knownXid;
		}
	}

	return count;
}

/*
 * Get oldest XID in the KnownAssignedXids array, or InvalidTransactionId
 * if nothing there.
 */
static TransactionId
KnownAssignedXidsGetOldestXmin(void)
{
	/* use volatile pointer to prevent code rearrangement */
	volatile ProcArrayStruct *pArray = procArray;
	int			head,
				tail;
	int			i;

	/*
	 * Fetch head just once, since it may change while we loop.
	 */
	SpinLockAcquire(&pArray->known_assigned_xids_lck);
	tail = pArray->tailKnownAssignedXids;
	head = pArray->headKnownAssignedXids;
	SpinLockRelease(&pArray->known_assigned_xids_lck);

	for (i = tail; i < head; i++)
	{
		/* Skip any gaps in the array */
		if (KnownAssignedXidsValid[i])
			return KnownAssignedXids[i];
	}

	return InvalidTransactionId;
}

/*
 * Display KnownAssignedXids to provide debug trail
 *
 * Currently this is only called within startup process, so we need no
 * special locking.
 *
 * Note this is pretty expensive, and much of the expense will be incurred
 * even if the elog message will get discarded.  It's not currently called
 * in any performance-critical places, however, so no need to be tenser.
 */
static void
KnownAssignedXidsDisplay(int trace_level)
{
	/* use volatile pointer to prevent code rearrangement */
	volatile ProcArrayStruct *pArray = procArray;
	StringInfoData buf;
	int			head,
				tail,
				i;
	int			nxids = 0;

	tail = pArray->tailKnownAssignedXids;
	head = pArray->headKnownAssignedXids;

	initStringInfo(&buf);

	for (i = tail; i < head; i++)
	{
		if (KnownAssignedXidsValid[i])
		{
			nxids++;
			appendStringInfo(&buf, "[%d]=%u ", i, KnownAssignedXids[i]);
		}
	}

	elog(trace_level, "%d KnownAssignedXids (num=%d tail=%d head=%d) %s",
		 nxids,
		 pArray->numKnownAssignedXids,
		 pArray->tailKnownAssignedXids,
		 pArray->headKnownAssignedXids,
		 buf.data);

	pfree(buf.data);
}