path: root/src/backend/postmaster/postmaster.c

/*-------------------------------------------------------------------------
 *
 * postmaster.c
 *	  This program acts as a clearing house for requests to the
 *	  POSTGRES system.	Frontend programs send a startup message
 *	  to the Postmaster and the postmaster uses the info in the
 *	  message to setup a backend process.
 *
 *	  The postmaster also manages system-wide operations such as
 *	  startup and shutdown. The postmaster itself doesn't do those
 *	  operations, mind you --- it just forks off a subprocess to do them
 *	  at the right times.  It also takes care of resetting the system
 *	  if a backend crashes.
 *
 *	  The postmaster process creates the shared memory and semaphore
 *	  pools during startup, but as a rule does not touch them itself.
 *	  In particular, it is not a member of the PGPROC array of backends
 *	  and so it cannot participate in lock-manager operations.	Keeping
 *	  the postmaster away from shared memory operations makes it simpler
 *	  and more reliable.  The postmaster is almost always able to recover
 *	  from crashes of individual backends by resetting shared memory;
 *	  if it did much with shared memory then it would be prone to crashing
 *	  along with the backends.
 *
 *	  When a request message is received, we now fork() immediately.
 *	  The child process performs authentication of the request, and
 *	  then becomes a backend if successful.  This allows the auth code
 *	  to be written in a simple single-threaded style (as opposed to the
 *	  crufty "poor man's multitasking" code that used to be needed).
 *	  More importantly, it ensures that blockages in non-multithreaded
 *	  libraries like SSL or PAM cannot cause denial of service to other
 *	  clients.
 *
 *
 * Portions Copyright (c) 1996-2009, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  $PostgreSQL: pgsql/src/backend/postmaster/postmaster.c,v 1.568 2009/01/01 17:23:46 momjian Exp $
 *
 * NOTES
 *
 * Initialization:
 *		The Postmaster sets up shared memory data structures
 *		for the backends.
 *
 * Synchronization:
 *		The Postmaster shares memory with the backends but should avoid
 *		touching shared memory, so as not to become stuck if a crashing
 *		backend screws up locks or shared memory.  Likewise, the Postmaster
 *		should never block on messages from frontend clients.
 *
 * Garbage Collection:
 *		The Postmaster cleans up after backends if they have an emergency
 *		exit and/or core dump.
 *
 * Error Reporting:
 *		Use write_stderr() only for reporting "interactive" errors
 *		(essentially, bogus arguments on the command line).  Once the
 *		postmaster is launched, use ereport().	In particular, don't use
 *		write_stderr() for anything that occurs after pmdaemonize.
 *
 *-------------------------------------------------------------------------
 */

#include "postgres.h"

#include <unistd.h>
#include <signal.h>
#include <time.h>
#include <sys/wait.h>
#include <ctype.h>
#include <sys/stat.h>
#include <sys/socket.h>
#include <fcntl.h>
#include <sys/param.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <netdb.h>
#include <limits.h>

#ifdef HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif

#ifdef HAVE_GETOPT_H
#include <getopt.h>
#endif

#ifdef USE_BONJOUR
#include <DNSServiceDiscovery/DNSServiceDiscovery.h>
#endif

#include "access/transam.h"
#include "access/xlog.h"
#include "bootstrap/bootstrap.h"
#include "catalog/pg_control.h"
#include "lib/dllist.h"
#include "libpq/auth.h"
#include "libpq/ip.h"
#include "libpq/libpq.h"
#include "libpq/pqsignal.h"
#include "miscadmin.h"
#include "pgstat.h"
#include "postmaster/autovacuum.h"
#include "postmaster/fork_process.h"
#include "postmaster/pgarch.h"
#include "postmaster/postmaster.h"
#include "postmaster/syslogger.h"
#include "storage/fd.h"
#include "storage/ipc.h"
#include "storage/pg_shmem.h"
#include "storage/pmsignal.h"
#include "storage/proc.h"
#include "tcop/tcopprot.h"
#include "utils/builtins.h"
#include "utils/datetime.h"
#include "utils/memutils.h"
#include "utils/ps_status.h"

#ifdef EXEC_BACKEND
#include "storage/spin.h"
#endif


/*
 * List of active backends (or child processes anyway; we don't actually
 * know whether a given child has become a backend or is still in the
 * authorization phase).  This is used mainly to keep track of how many
 * children we have and send them appropriate signals when necessary.
 *
 * "Special" children such as the startup, bgwriter and autovacuum launcher
 * tasks are not in this list.	Autovacuum worker processes are in it.
 * Also, "dead_end" children are in it: these are children launched just
 * for the purpose of sending a friendly rejection message to a would-be
 * client.	We must track them because they are attached to shared memory,
 * but we know they will never become live backends.
 */
typedef struct bkend
{
	pid_t		pid;			/* process id of backend */
	long		cancel_key;		/* cancel key for cancels for this backend */
	bool		is_autovacuum;	/* is it an autovacuum process? */
	bool		dead_end;		/* is it going to send an error and quit? */
} Backend;

static Dllist *BackendList;

#ifdef EXEC_BACKEND
/*
 * Number of entries in the shared-memory backend table.  This table is used
 * only for sending cancels, and therefore only includes children we allow
 * cancels on: regular backends and autovac workers.  In particular we exclude
 * dead_end children, allowing the table to have a known maximum size, to wit
 * the same too-many-children limit enforced by canAcceptConnections().
 */
#define NUM_BACKENDARRAY_ELEMS (2*MaxBackends)

static Backend *ShmemBackendArray;
#endif

/* The socket number we are listening for connections on */
int			PostPortNumber;
char	   *UnixSocketDir;
char	   *ListenAddresses;

/*
 * ReservedBackends is the number of backends reserved for superuser use.
 * This number is taken out of the pool size given by MaxBackends so
 * number of backend slots available to non-superusers is
 * (MaxBackends - ReservedBackends).  Note what this really means is
 * "if there are <= ReservedBackends connections available, only superusers
 * can make new connections" --- pre-existing superuser connections don't
 * count against the limit.
 */
int			ReservedBackends;

/* The socket(s) we're listening to. */
#define MAXLISTEN	64
static int	ListenSocket[MAXLISTEN];

/*
 * Set by the -o option
 */
static char ExtraOptions[MAXPGPATH];

/*
 * These globals control the behavior of the postmaster in case some
 * backend dumps core.	Normally, it kills all peers of the dead backend
 * and reinitializes shared memory.  By specifying -s or -n, we can have
 * the postmaster stop (rather than kill) peers and not reinitialize
 * shared data structures.	(Reinit is currently dead code, though.)
 */
static bool Reinit = true;
static int	SendStop = false;

/* still more option variables */
bool		EnableSSL = false;
bool		SilentMode = false; /* silent mode (-S) */

int			PreAuthDelay = 0;
int			AuthenticationTimeout = 60;

bool		log_hostname;		/* for ps display and logging */
bool		Log_connections = false;
bool		Db_user_namespace = false;

char	   *bonjour_name;

/* PIDs of special child processes; 0 when not running */
static pid_t StartupPID = 0,
			BgWriterPID = 0,
			WalWriterPID = 0,
			AutoVacPID = 0,
			PgArchPID = 0,
			PgStatPID = 0,
			SysLoggerPID = 0;

/* Startup/shutdown state */
#define			NoShutdown		0
#define			SmartShutdown	1
#define			FastShutdown	2

static int	Shutdown = NoShutdown;

static bool FatalError = false; /* T if recovering from backend crash */

/*
 * We use a simple state machine to control startup, shutdown, and
 * crash recovery (which is rather like shutdown followed by startup).
 *
 * Normal child backends can only be launched when we are in PM_RUN state.
 * (We also allow it in PM_WAIT_BACKUP state, but only for superusers.)
 * In other states we handle connection requests by launching "dead_end"
 * child processes, which will simply send the client an error message and
 * quit.  (We track these in the BackendList so that we can know when they
 * are all gone; this is important because they're still connected to shared
 * memory, and would interfere with an attempt to destroy the shmem segment,
 * possibly leading to SHMALL failure when we try to make a new one.)
 * In PM_WAIT_DEAD_END state we are waiting for all the dead_end children
 * to drain out of the system, and therefore stop accepting connection
 * requests at all until the last existing child has quit (which hopefully
 * will not be very long).
 *
 * Notice that this state variable does not distinguish *why* we entered
 * states later than PM_RUN --- Shutdown and FatalError must be consulted
 * to find that out.  FatalError is never true in PM_RUN state, nor in
 * PM_SHUTDOWN states (because we don't enter those states when trying to
 * recover from a crash).  It can be true in PM_STARTUP state, because we
 * don't clear it until we've successfully recovered.
 */
typedef enum
{
	PM_INIT,					/* postmaster starting */
	PM_STARTUP,					/* waiting for startup subprocess */
	PM_RUN,						/* normal "database is alive" state */
	PM_WAIT_BACKUP,				/* waiting for online backup mode to end */
	PM_WAIT_BACKENDS,			/* waiting for live backends to exit */
	PM_SHUTDOWN,				/* waiting for bgwriter to do shutdown ckpt */
	PM_SHUTDOWN_2,				/* waiting for archiver to finish */
	PM_WAIT_DEAD_END,			/* waiting for dead_end children to exit */
	PM_NO_CHILDREN				/* all important children have exited */
} PMState;

static PMState pmState = PM_INIT;

bool		ClientAuthInProgress = false;		/* T during new-client
												 * authentication */

bool		redirection_done = false;	/* stderr redirected for syslogger? */

/* received START_AUTOVAC_LAUNCHER signal */
static volatile sig_atomic_t start_autovac_launcher = false;

/*
 * State for assigning random salts and cancel keys.
 * Also, the global MyCancelKey passes the cancel key assigned to a given
 * backend from the postmaster to that backend (via fork).
 */
static unsigned int random_seed = 0;
static struct timeval random_start_time;

extern char *optarg;
extern int	optind,
			opterr;

#ifdef HAVE_INT_OPTRESET
extern int	optreset;
#endif

/*
 * postmaster.c - function prototypes
 */
static void checkDataDir(void);

#ifdef USE_BONJOUR
static void reg_reply(DNSServiceRegistrationReplyErrorType errorCode,
		  void *context);
#endif
static void pmdaemonize(void);
static Port *ConnCreate(int serverFd);
static void ConnFree(Port *port);
static void reset_shared(int port);
static void SIGHUP_handler(SIGNAL_ARGS);
static void pmdie(SIGNAL_ARGS);
static void reaper(SIGNAL_ARGS);
static void sigusr1_handler(SIGNAL_ARGS);
static void dummy_handler(SIGNAL_ARGS);
static void CleanupBackend(int pid, int exitstatus);
static void HandleChildCrash(int pid, int exitstatus, const char *procname);
static void LogChildExit(int lev, const char *procname,
			 int pid, int exitstatus);
static void PostmasterStateMachine(void);
static void BackendInitialize(Port *port);
static int	BackendRun(Port *port);
static void ExitPostmaster(int status);
static int	ServerLoop(void);
static int	BackendStartup(Port *port);
static int	ProcessStartupPacket(Port *port, bool SSLdone);
static void processCancelRequest(Port *port, void *pkt);
static int	initMasks(fd_set *rmask);
static void report_fork_failure_to_client(Port *port, int errnum);
static enum CAC_state canAcceptConnections(void);
static long PostmasterRandom(void);
static void RandomSalt(char *md5Salt);
static void signal_child(pid_t pid, int signal);
static void SignalSomeChildren(int signal, bool only_autovac);

#define SignalChildren(sig)			SignalSomeChildren(sig, false)
#define SignalAutovacWorkers(sig)	SignalSomeChildren(sig, true)
static int	CountChildren(void);
static bool CreateOptsFile(int argc, char *argv[], char *fullprogname);
static pid_t StartChildProcess(AuxProcType type);
static void StartAutovacuumWorker(void);

#ifdef EXEC_BACKEND

#ifdef WIN32
static pid_t win32_waitpid(int *exitstatus);
static void WINAPI pgwin32_deadchild_callback(PVOID lpParameter, BOOLEAN TimerOrWaitFired);

static HANDLE win32ChildQueue;

typedef struct
{
	HANDLE		waitHandle;
	HANDLE		procHandle;
	DWORD		procId;
}	win32_deadchild_waitinfo;

HANDLE		PostmasterHandle;
#endif

static pid_t backend_forkexec(Port *port);
static pid_t internal_forkexec(int argc, char *argv[], Port *port);

/* Type for a socket that can be inherited to a client process */
#ifdef WIN32
typedef struct
{
	SOCKET		origsocket;		/* Original socket value, or -1 if not a
								 * socket */
	WSAPROTOCOL_INFO wsainfo;
}	InheritableSocket;
#else
typedef int InheritableSocket;
#endif

typedef struct LWLock LWLock;	/* ugly kluge */

/*
 * Structure contains all variables passed to exec:ed backends
 */
typedef struct
{
	Port		port;
	InheritableSocket portsocket;
	char		DataDir[MAXPGPATH];
	int			ListenSocket[MAXLISTEN];
	long		MyCancelKey;
	unsigned long UsedShmemSegID;
	void	   *UsedShmemSegAddr;
	slock_t    *ShmemLock;
	VariableCache ShmemVariableCache;
	Backend    *ShmemBackendArray;
	LWLock	   *LWLockArray;
	slock_t    *ProcStructLock;
	PROC_HDR   *ProcGlobal;
	PGPROC	   *AuxiliaryProcs;
	InheritableSocket pgStatSock;
	pid_t		PostmasterPid;
	TimestampTz PgStartTime;
	TimestampTz PgReloadTime;
	bool		redirection_done;
#ifdef WIN32
	HANDLE		PostmasterHandle;
	HANDLE		initial_signal_pipe;
	HANDLE		syslogPipe[2];
#else
	int			syslogPipe[2];
#endif
	char		my_exec_path[MAXPGPATH];
	char		pkglib_path[MAXPGPATH];
	char		ExtraOptions[MAXPGPATH];
	char		lc_collate[NAMEDATALEN];
	char		lc_ctype[NAMEDATALEN];
}	BackendParameters;

static void read_backend_variables(char *id, Port *port);
static void restore_backend_variables(BackendParameters * param, Port *port);

#ifndef WIN32
static bool save_backend_variables(BackendParameters * param, Port *port);
#else
static bool save_backend_variables(BackendParameters * param, Port *port,
					   HANDLE childProcess, pid_t childPid);
#endif

static void ShmemBackendArrayAdd(Backend *bn);
static void ShmemBackendArrayRemove(pid_t pid);
#endif   /* EXEC_BACKEND */

#define StartupDataBase()		StartChildProcess(StartupProcess)
#define StartBackgroundWriter() StartChildProcess(BgWriterProcess)
#define StartWalWriter()		StartChildProcess(WalWriterProcess)

/* Macros to check exit status of a child process */
#define EXIT_STATUS_0(st)  ((st) == 0)
#define EXIT_STATUS_1(st)  (WIFEXITED(st) && WEXITSTATUS(st) == 1)


/*
 * Postmaster main entry point
 */
int
PostmasterMain(int argc, char *argv[])
{
	int			opt;
	int			status;
	char	   *userDoption = NULL;
	int			i;

	MyProcPid = PostmasterPid = getpid();

	MyStartTime = time(NULL);

	IsPostmasterEnvironment = true;

	/*
	 * for security, no dir or file created can be group or other accessible
	 */
	umask((mode_t) 0077);

	/*
	 * Fire up essential subsystems: memory management
	 */
	MemoryContextInit();

	/*
	 * By default, palloc() requests in the postmaster will be allocated in
	 * the PostmasterContext, which is space that can be recycled by backends.
	 * Allocated data that needs to be available to backends should be
	 * allocated in TopMemoryContext.
	 */
	PostmasterContext = AllocSetContextCreate(TopMemoryContext,
											  "Postmaster",
											  ALLOCSET_DEFAULT_MINSIZE,
											  ALLOCSET_DEFAULT_INITSIZE,
											  ALLOCSET_DEFAULT_MAXSIZE);
	MemoryContextSwitchTo(PostmasterContext);

	if (find_my_exec(argv[0], my_exec_path) < 0)
		elog(FATAL, "%s: could not locate my own executable path",
			 argv[0]);

	get_pkglib_path(my_exec_path, pkglib_path);

	/*
	 * Options setup
	 */
	InitializeGUCOptions();

	opterr = 1;

	/*
	 * Parse command-line options.	CAUTION: keep this in sync with
	 * tcop/postgres.c (the option sets should not conflict) and with the
	 * common help() function in main/main.c.
	 */
	while ((opt = getopt(argc, argv, "A:B:c:D:d:EeFf:h:ijk:lN:nOo:Pp:r:S:sTt:W:-:")) != -1)
	{
		switch (opt)
		{
			case 'A':
				SetConfigOption("debug_assertions", optarg, PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'B':
				SetConfigOption("shared_buffers", optarg, PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'D':
				userDoption = optarg;
				break;

			case 'd':
				set_debug_options(atoi(optarg), PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'E':
				SetConfigOption("log_statement", "all", PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'e':
				SetConfigOption("datestyle", "euro", PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'F':
				SetConfigOption("fsync", "false", PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'f':
				if (!set_plan_disabling_options(optarg, PGC_POSTMASTER, PGC_S_ARGV))
				{
					write_stderr("%s: invalid argument for option -f: \"%s\"\n",
								 progname, optarg);
					ExitPostmaster(1);
				}
				break;

			case 'h':
				SetConfigOption("listen_addresses", optarg, PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'i':
				SetConfigOption("listen_addresses", "*", PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'j':
				/* only used by interactive backend */
				break;

			case 'k':
				SetConfigOption("unix_socket_directory", optarg, PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'l':
				SetConfigOption("ssl", "true", PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'N':
				SetConfigOption("max_connections", optarg, PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'n':
				/* Don't reinit shared mem after abnormal exit */
				Reinit = false;
				break;

			case 'O':
				SetConfigOption("allow_system_table_mods", "true", PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'o':
				/* Other options to pass to the backend on the command line */
				snprintf(ExtraOptions + strlen(ExtraOptions),
						 sizeof(ExtraOptions) - strlen(ExtraOptions),
						 " %s", optarg);
				break;

			case 'P':
				SetConfigOption("ignore_system_indexes", "true", PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'p':
				SetConfigOption("port", optarg, PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'r':
				/* only used by single-user backend */
				break;

			case 'S':
				SetConfigOption("work_mem", optarg, PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 's':
				SetConfigOption("log_statement_stats", "true", PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'T':

				/*
				 * In the event that some backend dumps core, send SIGSTOP,
				 * rather than SIGQUIT, to all its peers.  This lets the wily
				 * post_hacker collect core dumps from everyone.
				 */
				SendStop = true;
				break;

			case 't':
				{
					const char *tmp = get_stats_option_name(optarg);

					if (tmp)
					{
						SetConfigOption(tmp, "true", PGC_POSTMASTER, PGC_S_ARGV);
					}
					else
					{
						write_stderr("%s: invalid argument for option -t: \"%s\"\n",
									 progname, optarg);
						ExitPostmaster(1);
					}
					break;
				}

			case 'W':
				SetConfigOption("post_auth_delay", optarg, PGC_POSTMASTER, PGC_S_ARGV);
				break;

			case 'c':
			case '-':
				{
					char	   *name,
							   *value;

					ParseLongOption(optarg, &name, &value);
					if (!value)
					{
						if (opt == '-')
							ereport(ERROR,
									(errcode(ERRCODE_SYNTAX_ERROR),
									 errmsg("--%s requires a value",
											optarg)));
						else
							ereport(ERROR,
									(errcode(ERRCODE_SYNTAX_ERROR),
									 errmsg("-c %s requires a value",
											optarg)));
					}

					SetConfigOption(name, value, PGC_POSTMASTER, PGC_S_ARGV);
					free(name);
					if (value)
						free(value);
					break;
				}

			default:
				write_stderr("Try \"%s --help\" for more information.\n",
							 progname);
				ExitPostmaster(1);
		}
	}

	/*
	 * Postmaster accepts no non-option switch arguments.
	 */
	if (optind < argc)
	{
		write_stderr("%s: invalid argument: \"%s\"\n",
					 progname, argv[optind]);
		write_stderr("Try \"%s --help\" for more information.\n",
					 progname);
		ExitPostmaster(1);
	}

#ifdef EXEC_BACKEND
	/* Locate executable backend before we change working directory */
	if (find_other_exec(argv[0], "postgres", PG_BACKEND_VERSIONSTR,
						postgres_exec_path) < 0)
		ereport(FATAL,
				(errmsg("%s: could not locate matching postgres executable",
						progname)));
#endif

	/*
	 * Locate the proper configuration files and data directory, and read
	 * postgresql.conf for the first time.
	 */
	if (!SelectConfigFiles(userDoption, progname))
		ExitPostmaster(2);

	/* Verify that DataDir looks reasonable */
	checkDataDir();

	/* And switch working directory into it */
	ChangeToDataDir();

	/*
	 * Check for invalid combinations of GUC settings.
	 */
	if (ReservedBackends >= MaxBackends)
	{
		write_stderr("%s: superuser_reserved_connections must be less than max_connections\n", progname);
		ExitPostmaster(1);
	}

	/*
	 * Other one-time internal sanity checks can go here, if they are fast.
	 * (Put any slow processing further down, after postmaster.pid creation.)
	 */
	if (!CheckDateTokenTables())
	{
		write_stderr("%s: invalid datetoken tables, please fix\n", progname);
		ExitPostmaster(1);
	}

	/*
	 * Now that we are done processing the postmaster arguments, reset
	 * getopt(3) library so that it will work correctly in subprocesses.
	 */
	optind = 1;
#ifdef HAVE_INT_OPTRESET
	optreset = 1;				/* some systems need this too */
#endif

	/* For debugging: display postmaster environment */
	{
		extern char **environ;
		char	  **p;

		ereport(DEBUG3,
				(errmsg_internal("%s: PostmasterMain: initial environ dump:",
								 progname)));
		ereport(DEBUG3,
			 (errmsg_internal("-----------------------------------------")));
		for (p = environ; *p; ++p)
			ereport(DEBUG3,
					(errmsg_internal("\t%s", *p)));
		ereport(DEBUG3,
			 (errmsg_internal("-----------------------------------------")));
	}

	/*
	 * Fork away from controlling terminal, if -S specified.
	 *
	 * Must do this before we grab any interlock files, else the interlocks
	 * will show the wrong PID.
	 */
	if (SilentMode)
		pmdaemonize();

	/*
	 * Create lockfile for data directory.
	 *
	 * We want to do this before we try to grab the input sockets, because the
	 * data directory interlock is more reliable than the socket-file
	 * interlock (thanks to whoever decided to put socket files in /tmp :-().
	 * For the same reason, it's best to grab the TCP socket(s) before the
	 * Unix socket.
	 */
	CreateDataDirLockFile(true);

	/*
	 * If timezone is not set, determine what the OS uses.	(In theory this
	 * should be done during GUC initialization, but because it can take as
	 * much as several seconds, we delay it until after we've created the
	 * postmaster.pid file.  This prevents problems with boot scripts that
	 * expect the pidfile to appear quickly.  Also, we avoid problems with
	 * trying to locate the timezone files too early in initialization.)
	 */
	pg_timezone_initialize();

	/*
	 * Likewise, init timezone_abbreviations if not already set.
	 */
	pg_timezone_abbrev_initialize();

	/*
	 * Initialize SSL library, if specified.
	 */
#ifdef USE_SSL
	if (EnableSSL)
		secure_initialize();
#endif

	/*
	 * process any libraries that should be preloaded at postmaster start
	 */
	process_shared_preload_libraries();

	/*
	 * Remove old temporary files.	At this point there can be no other
	 * Postgres processes running in this directory, so this should be safe.
	 */
	RemovePgTempFiles();

	/*
	 * Establish input sockets.
	 */
	for (i = 0; i < MAXLISTEN; i++)
		ListenSocket[i] = -1;

	if (ListenAddresses)
	{
		char	   *rawstring;
		List	   *elemlist;
		ListCell   *l;
		int			success = 0;

		/* Need a modifiable copy of ListenAddresses */
		rawstring = pstrdup(ListenAddresses);

		/* Parse string into list of identifiers */
		if (!SplitIdentifierString(rawstring, ',', &elemlist))
		{
			/* syntax error in list */
			ereport(FATAL,
					(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
					 errmsg("invalid list syntax for \"listen_addresses\"")));
		}

		foreach(l, elemlist)
		{
			char	   *curhost = (char *) lfirst(l);

			if (strcmp(curhost, "*") == 0)
				status = StreamServerPort(AF_UNSPEC, NULL,
										  (unsigned short) PostPortNumber,
										  UnixSocketDir,
										  ListenSocket, MAXLISTEN);
			else
				status = StreamServerPort(AF_UNSPEC, curhost,
										  (unsigned short) PostPortNumber,
										  UnixSocketDir,
										  ListenSocket, MAXLISTEN);
			if (status == STATUS_OK)
				success++;
			else
				ereport(WARNING,
						(errmsg("could not create listen socket for \"%s\"",
								curhost)));
		}

		if (!success && list_length(elemlist))
			ereport(FATAL,
					(errmsg("could not create any TCP/IP sockets")));

		list_free(elemlist);
		pfree(rawstring);
	}

#ifdef USE_BONJOUR
	/* Register for Bonjour only if we opened TCP socket(s) */
	if (ListenSocket[0] != -1 && bonjour_name != NULL)
	{
		DNSServiceRegistrationCreate(bonjour_name,
									 "_postgresql._tcp.",
									 "",
									 htons(PostPortNumber),
									 "",
									 (DNSServiceRegistrationReply) reg_reply,
									 NULL);
	}
#endif

#ifdef HAVE_UNIX_SOCKETS
	status = StreamServerPort(AF_UNIX, NULL,
							  (unsigned short) PostPortNumber,
							  UnixSocketDir,
							  ListenSocket, MAXLISTEN);
	if (status != STATUS_OK)
		ereport(WARNING,
				(errmsg("could not create Unix-domain socket")));
#endif

	/*
	 * check that we have some socket to listen on
	 */
	if (ListenSocket[0] == -1)
		ereport(FATAL,
				(errmsg("no socket created for listening")));

	/*
	 * Set up shared memory and semaphores.
	 */
	reset_shared(PostPortNumber);

	/*
	 * Estimate number of openable files.  This must happen after setting up
	 * semaphores, because on some platforms semaphores count as open files.
	 */
	set_max_safe_fds();

	/*
	 * Load configuration files for client authentication.
	 */
	if (!load_hba())
	{
		/* 
		 * It makes no sense continue if we fail to load the HBA file, since 
		 * there is no way to connect to the database in this case.
		 */
		ereport(FATAL,
				(errmsg("could not load pg_hba.conf")));
	}
	load_ident();

	/*
	 * Initialize the list of active backends.
	 */
	BackendList = DLNewList();

#ifdef WIN32

	/*
	 * Initialize I/O completion port used to deliver list of dead children.
	 */
	win32ChildQueue = CreateIoCompletionPort(INVALID_HANDLE_VALUE, NULL, 0, 1);
	if (win32ChildQueue == NULL)
		ereport(FATAL,
		   (errmsg("could not create I/O completion port for child queue")));

	/*
	 * Set up a handle that child processes can use to check whether the
	 * postmaster is still running.
	 */
	if (DuplicateHandle(GetCurrentProcess(),
						GetCurrentProcess(),
						GetCurrentProcess(),
						&PostmasterHandle,
						0,
						TRUE,
						DUPLICATE_SAME_ACCESS) == 0)
		ereport(FATAL,
				(errmsg_internal("could not duplicate postmaster handle: error code %d",
								 (int) GetLastError())));
#endif

	/*
	 * Record postmaster options.  We delay this till now to avoid recording
	 * bogus options (eg, NBuffers too high for available memory).
	 */
	if (!CreateOptsFile(argc, argv, my_exec_path))
		ExitPostmaster(1);

#ifdef EXEC_BACKEND
	/* Write out nondefault GUC settings for child processes to use */
	write_nondefault_variables(PGC_POSTMASTER);
#endif

	/*
	 * Write the external PID file if requested
	 */
	if (external_pid_file)
	{
		FILE	   *fpidfile = fopen(external_pid_file, "w");

		if (fpidfile)
		{
			fprintf(fpidfile, "%d\n", MyProcPid);
			fclose(fpidfile);
			/* Should we remove the pid file on postmaster exit? */
		}
		else
			write_stderr("%s: could not write external PID file \"%s\": %s\n",
						 progname, external_pid_file, strerror(errno));
	}

	/*
	 * Set up signal handlers for the postmaster process.
	 *
	 * CAUTION: when changing this list, check for side-effects on the signal
	 * handling setup of child processes.  See tcop/postgres.c,
	 * bootstrap/bootstrap.c, postmaster/bgwriter.c, postmaster/walwriter.c,
	 * postmaster/autovacuum.c, postmaster/pgarch.c, postmaster/pgstat.c, and
	 * postmaster/syslogger.c.
	 */
	pqinitmask();
	PG_SETMASK(&BlockSig);

	pqsignal(SIGHUP, SIGHUP_handler);	/* reread config file and have
										 * children do same */
	pqsignal(SIGINT, pmdie);	/* send SIGTERM and shut down */
	pqsignal(SIGQUIT, pmdie);	/* send SIGQUIT and die */
	pqsignal(SIGTERM, pmdie);	/* wait for children and shut down */
	pqsignal(SIGALRM, SIG_IGN); /* ignored */
	pqsignal(SIGPIPE, SIG_IGN); /* ignored */
	pqsignal(SIGUSR1, sigusr1_handler); /* message from child process */
	pqsignal(SIGUSR2, dummy_handler);	/* unused, reserve for children */
	pqsignal(SIGCHLD, reaper);	/* handle child termination */
	pqsignal(SIGTTIN, SIG_IGN); /* ignored */
	pqsignal(SIGTTOU, SIG_IGN); /* ignored */
	/* ignore SIGXFSZ, so that ulimit violations work like disk full */
#ifdef SIGXFSZ
	pqsignal(SIGXFSZ, SIG_IGN); /* ignored */
#endif

	/*
	 * If enabled, start up syslogger collection subprocess
	 */
	SysLoggerPID = SysLogger_Start();

	/*
	 * Reset whereToSendOutput from DestDebug (its starting state) to
	 * DestNone. This stops ereport from sending log messages to stderr unless
	 * Log_destination permits.  We don't do this until the postmaster is
	 * fully launched, since startup failures may as well be reported to
	 * stderr.
	 */
	whereToSendOutput = DestNone;

	/*
	 * Initialize stats collection subsystem (this does NOT start the
	 * collector process!)
	 */
	pgstat_init();

	/*
	 * Initialize the autovacuum subsystem (again, no process start yet)
	 */
	autovac_init();

	/*
	 * Remember postmaster startup time
	 */
	PgStartTime = GetCurrentTimestamp();
	/* PostmasterRandom wants its own copy */
	gettimeofday(&random_start_time, NULL);

	/*
	 * We're ready to rock and roll...
	 */
	StartupPID = StartupDataBase();
	Assert(StartupPID != 0);
	pmState = PM_STARTUP;

	status = ServerLoop();

	/*
	 * ServerLoop probably shouldn't ever return, but if it does, close down.
	 */
	ExitPostmaster(status != STATUS_OK);

	return 0;					/* not reached */
}


/*
 * Validate the proposed data directory
 */
static void
checkDataDir(void)
{
	char		path[MAXPGPATH];
	FILE	   *fp;
	struct stat stat_buf;

	Assert(DataDir);

	if (stat(DataDir, &stat_buf) != 0)
	{
		if (errno == ENOENT)
			ereport(FATAL,
					(errcode_for_file_access(),
					 errmsg("data directory \"%s\" does not exist",
							DataDir)));
		else
			ereport(FATAL,
					(errcode_for_file_access(),
				 errmsg("could not read permissions of directory \"%s\": %m",
						DataDir)));
	}

	/* eventual chdir would fail anyway, but let's test ... */
	if (!S_ISDIR(stat_buf.st_mode))
		ereport(FATAL,
				(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
				 errmsg("specified data directory \"%s\" is not a directory",
						DataDir)));

	/*
	 * Check that the directory belongs to my userid; if not, reject.
	 *
	 * This check is an essential part of the interlock that prevents two
	 * postmasters from starting in the same directory (see CreateLockFile()).
	 * Do not remove or weaken it.
	 *
	 * XXX can we safely enable this check on Windows?
	 */
#if !defined(WIN32) && !defined(__CYGWIN__)
	if (stat_buf.st_uid != geteuid())
		ereport(FATAL,
				(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
				 errmsg("data directory \"%s\" has wrong ownership",
						DataDir),
				 errhint("The server must be started by the user that owns the data directory.")));
#endif

	/*
	 * Check if the directory has group or world access.  If so, reject.
	 *
	 * It would be possible to allow weaker constraints (for example, allow
	 * group access) but we cannot make a general assumption that that is
	 * okay; for example there are platforms where nearly all users
	 * customarily belong to the same group.  Perhaps this test should be
	 * configurable.
	 *
	 * XXX temporarily suppress check when on Windows, because there may not
	 * be proper support for Unix-y file permissions.  Need to think of a
	 * reasonable check to apply on Windows.
	 */
#if !defined(WIN32) && !defined(__CYGWIN__)
	if (stat_buf.st_mode & (S_IRWXG | S_IRWXO))
		ereport(FATAL,
				(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
				 errmsg("data directory \"%s\" has group or world access",
						DataDir),
				 errdetail("Permissions should be u=rwx (0700).")));
#endif

	/* Look for PG_VERSION before looking for pg_control */
	ValidatePgVersion(DataDir);

	snprintf(path, sizeof(path), "%s/global/pg_control", DataDir);

	fp = AllocateFile(path, PG_BINARY_R);
	if (fp == NULL)
	{
		write_stderr("%s: could not find the database system\n"
					 "Expected to find it in the directory \"%s\",\n"
					 "but could not open file \"%s\": %s\n",
					 progname, DataDir, path, strerror(errno));
		ExitPostmaster(2);
	}
	FreeFile(fp);
}


#ifdef USE_BONJOUR

/*
 * empty callback function for DNSServiceRegistrationCreate()
 */
static void
reg_reply(DNSServiceRegistrationReplyErrorType errorCode, void *context)
{
}
#endif   /* USE_BONJOUR */


/*
 * Fork away from the controlling terminal (-S option)
 */
static void
pmdaemonize(void)
{
#ifndef WIN32
	int			i;
	pid_t		pid;

	pid = fork_process();
	if (pid == (pid_t) -1)
	{
		write_stderr("%s: could not fork background process: %s\n",
					 progname, strerror(errno));
		ExitPostmaster(1);
	}
	else if (pid)
	{							/* parent */
		/* Parent should just exit, without doing any atexit cleanup */
		_exit(0);
	}

	MyProcPid = PostmasterPid = getpid();		/* reset PID vars to child */

	MyStartTime = time(NULL);

	/*
	 * GH: If there's no setsid(), we hopefully don't need silent mode. Until
	 * there's a better solution.
	 */
#ifdef HAVE_SETSID
	if (setsid() < 0)
	{
		write_stderr("%s: could not dissociate from controlling TTY: %s\n",
					 progname, strerror(errno));
		ExitPostmaster(1);
	}
#endif
	i = open(DEVNULL, O_RDWR, 0);
	dup2(i, 0);
	dup2(i, 1);
	dup2(i, 2);
	close(i);
#else							/* WIN32 */
	/* not supported */
	elog(FATAL, "SilentMode not supported under WIN32");
#endif   /* WIN32 */
}


/*
 * Main idle loop of postmaster
 */
static int
ServerLoop(void)
{
	fd_set		readmask;
	int			nSockets;
	time_t		now,
				last_touch_time;

	last_touch_time = time(NULL);

	nSockets = initMasks(&readmask);

	for (;;)
	{
		fd_set		rmask;
		int			selres;

		/*
		 * Wait for a connection request to arrive.
		 *
		 * We wait at most one minute, to ensure that the other background
		 * tasks handled below get done even when no requests are arriving.
		 *
		 * If we are in PM_WAIT_DEAD_END state, then we don't want to accept
		 * any new connections, so we don't call select() at all; just sleep
		 * for a little bit with signals unblocked.
		 */
		memcpy((char *) &rmask, (char *) &readmask, sizeof(fd_set));

		PG_SETMASK(&UnBlockSig);

		if (pmState == PM_WAIT_DEAD_END)
		{
			pg_usleep(100000L); /* 100 msec seems reasonable */
			selres = 0;
		}
		else
		{
			/* must set timeout each time; some OSes change it! */
			struct timeval timeout;

			timeout.tv_sec = 60;
			timeout.tv_usec = 0;

			selres = select(nSockets, &rmask, NULL, NULL, &timeout);
		}

		/*
		 * Block all signals until we wait again.  (This makes it safe for our
		 * signal handlers to do nontrivial work.)
		 */
		PG_SETMASK(&BlockSig);

		/* Now check the select() result */
		if (selres < 0)
		{
			if (errno != EINTR && errno != EWOULDBLOCK)
			{
				ereport(LOG,
						(errcode_for_socket_access(),
						 errmsg("select() failed in postmaster: %m")));
				return STATUS_ERROR;
			}
		}

		/*
		 * New connection pending on any of our sockets? If so, fork a child
		 * process to deal with it.
		 */
		if (selres > 0)
		{
			int			i;

			for (i = 0; i < MAXLISTEN; i++)
			{
				if (ListenSocket[i] == -1)
					break;
				if (FD_ISSET(ListenSocket[i], &rmask))
				{
					Port	   *port;

					port = ConnCreate(ListenSocket[i]);
					if (port)
					{
						BackendStartup(port);

						/*
						 * We no longer need the open socket or port structure
						 * in this process
						 */
						StreamClose(port->sock);
						ConnFree(port);
					}
				}
			}
		}

		/* If we have lost the log collector, try to start a new one */
		if (SysLoggerPID == 0 && Logging_collector)
			SysLoggerPID = SysLogger_Start();

		/*
		 * If no background writer process is running, and we are not in a
		 * state that prevents it, start one.  It doesn't matter if this
		 * fails, we'll just try again later.
		 */
		if (BgWriterPID == 0 && pmState == PM_RUN)
			BgWriterPID = StartBackgroundWriter();

		/*
		 * Likewise, if we have lost the walwriter process, try to start a new
		 * one.
		 */
		if (WalWriterPID == 0 && pmState == PM_RUN)
			WalWriterPID = StartWalWriter();

		/* If we have lost the autovacuum launcher, try to start a new one */
		if (AutoVacPID == 0 &&
			(AutoVacuumingActive() || start_autovac_launcher) &&
			pmState == PM_RUN)
		{
			AutoVacPID = StartAutoVacLauncher();
			if (AutoVacPID != 0)
				start_autovac_launcher = false; /* signal processed */
		}

		/* If we have lost the archiver, try to start a new one */
		if (XLogArchivingActive() && PgArchPID == 0 && pmState == PM_RUN)
			PgArchPID = pgarch_start();

		/* If we have lost the stats collector, try to start a new one */
		if (PgStatPID == 0 && pmState == PM_RUN)
			PgStatPID = pgstat_start();

		/*
		 * Touch the socket and lock file every 58 minutes, to ensure that
		 * they are not removed by overzealous /tmp-cleaning tasks.  We assume
		 * no one runs cleaners with cutoff times of less than an hour ...
		 */
		now = time(NULL);
		if (now - last_touch_time >= 58 * SECS_PER_MINUTE)
		{
			TouchSocketFile();
			TouchSocketLockFile();
			last_touch_time = now;
		}
	}
}


/*
 * Initialise the masks for select() for the ports we are listening on.
 * Return the number of sockets to listen on.
 */
static int
initMasks(fd_set *rmask)
{
	int			maxsock = -1;
	int			i;

	FD_ZERO(rmask);

	for (i = 0; i < MAXLISTEN; i++)
	{
		int			fd = ListenSocket[i];

		if (fd == -1)
			break;
		FD_SET(fd, rmask);
		if (fd > maxsock)
			maxsock = fd;
	}

	return maxsock + 1;
}


/*
 * Read a client's startup packet and do something according to it.
 *
 * Returns STATUS_OK or STATUS_ERROR, or might call ereport(FATAL) and
 * not return at all.
 *
 * (Note that ereport(FATAL) stuff is sent to the client, so only use it
 * if that's what you want.  Return STATUS_ERROR if you don't want to
 * send anything to the client, which would typically be appropriate
 * if we detect a communications failure.)
 */
static int
ProcessStartupPacket(Port *port, bool SSLdone)
{
	int32		len;
	void	   *buf;
	ProtocolVersion proto;
	MemoryContext oldcontext;

	if (pq_getbytes((char *) &len, 4) == EOF)
	{
		/*
		 * EOF after SSLdone probably means the client didn't like our
		 * response to NEGOTIATE_SSL_CODE.	That's not an error condition, so
		 * don't clutter the log with a complaint.
		 */
		if (!SSLdone)
			ereport(COMMERROR,
					(errcode(ERRCODE_PROTOCOL_VIOLATION),
					 errmsg("incomplete startup packet")));
		return STATUS_ERROR;
	}

	len = ntohl(len);
	len -= 4;

	if (len < (int32) sizeof(ProtocolVersion) ||
		len > MAX_STARTUP_PACKET_LENGTH)
	{
		ereport(COMMERROR,
				(errcode(ERRCODE_PROTOCOL_VIOLATION),
				 errmsg("invalid length of startup packet")));
		return STATUS_ERROR;
	}

	/*
	 * Allocate at least the size of an old-style startup packet, plus one
	 * extra byte, and make sure all are zeroes.  This ensures we will have
	 * null termination of all strings, in both fixed- and variable-length
	 * packet layouts.
	 */
	if (len <= (int32) sizeof(StartupPacket))
		buf = palloc0(sizeof(StartupPacket) + 1);
	else
		buf = palloc0(len + 1);

	if (pq_getbytes(buf, len) == EOF)
	{
		ereport(COMMERROR,
				(errcode(ERRCODE_PROTOCOL_VIOLATION),
				 errmsg("incomplete startup packet")));
		return STATUS_ERROR;
	}

	/*
	 * The first field is either a protocol version number or a special
	 * request code.
	 */
	port->proto = proto = ntohl(*((ProtocolVersion *) buf));

	if (proto == CANCEL_REQUEST_CODE)
	{
		processCancelRequest(port, buf);
		return 127;				/* XXX */
	}

	if (proto == NEGOTIATE_SSL_CODE && !SSLdone)
	{
		char		SSLok;

#ifdef USE_SSL
		/* No SSL when disabled or on Unix sockets */
		if (!EnableSSL || IS_AF_UNIX(port->laddr.addr.ss_family))
			SSLok = 'N';
		else
			SSLok = 'S';		/* Support for SSL */
#else
		SSLok = 'N';			/* No support for SSL */
#endif

retry1:
		if (send(port->sock, &SSLok, 1, 0) != 1)
		{
			if (errno == EINTR)
				goto retry1;	/* if interrupted, just retry */
			ereport(COMMERROR,
					(errcode_for_socket_access(),
					 errmsg("failed to send SSL negotiation response: %m")));
			return STATUS_ERROR;	/* close the connection */
		}

#ifdef USE_SSL
		if (SSLok == 'S' && secure_open_server(port) == -1)
			return STATUS_ERROR;
#endif
		/* regular startup packet, cancel, etc packet should follow... */
		/* but not another SSL negotiation request */
		return ProcessStartupPacket(port, true);
	}

	/* Could add additional special packet types here */

	/*
	 * Set FrontendProtocol now so that ereport() knows what format to send if
	 * we fail during startup.
	 */
	FrontendProtocol = proto;

	/* Check we can handle the protocol the frontend is using. */

	if (PG_PROTOCOL_MAJOR(proto) < PG_PROTOCOL_MAJOR(PG_PROTOCOL_EARLIEST) ||
		PG_PROTOCOL_MAJOR(proto) > PG_PROTOCOL_MAJOR(PG_PROTOCOL_LATEST) ||
		(PG_PROTOCOL_MAJOR(proto) == PG_PROTOCOL_MAJOR(PG_PROTOCOL_LATEST) &&
		 PG_PROTOCOL_MINOR(proto) > PG_PROTOCOL_MINOR(PG_PROTOCOL_LATEST)))
		ereport(FATAL,
				(errcode(ERRCODE_FEATURE_NOT_SUPPORTED),
				 errmsg("unsupported frontend protocol %u.%u: server supports %u.0 to %u.%u",
						PG_PROTOCOL_MAJOR(proto), PG_PROTOCOL_MINOR(proto),
						PG_PROTOCOL_MAJOR(PG_PROTOCOL_EARLIEST),
						PG_PROTOCOL_MAJOR(PG_PROTOCOL_LATEST),
						PG_PROTOCOL_MINOR(PG_PROTOCOL_LATEST))));

	/*
	 * Now fetch parameters out of startup packet and save them into the Port
	 * structure.  All data structures attached to the Port struct must be
	 * allocated in TopMemoryContext so that they won't disappear when we pass
	 * them to PostgresMain (see BackendRun).  We need not worry about leaking
	 * this storage on failure, since we aren't in the postmaster process
	 * anymore.
	 */
	oldcontext = MemoryContextSwitchTo(TopMemoryContext);

	if (PG_PROTOCOL_MAJOR(proto) >= 3)
	{
		int32		offset = sizeof(ProtocolVersion);

		/*
		 * Scan packet body for name/option pairs.	We can assume any string
		 * beginning within the packet body is null-terminated, thanks to
		 * zeroing extra byte above.
		 */
		port->guc_options = NIL;

		while (offset < len)
		{
			char	   *nameptr = ((char *) buf) + offset;
			int32		valoffset;
			char	   *valptr;

			if (*nameptr == '\0')
				break;			/* found packet terminator */
			valoffset = offset + strlen(nameptr) + 1;
			if (valoffset >= len)
				break;			/* missing value, will complain below */
			valptr = ((char *) buf) + valoffset;

			if (strcmp(nameptr, "database") == 0)
				port->database_name = pstrdup(valptr);
			else if (strcmp(nameptr, "user") == 0)
				port->user_name = pstrdup(valptr);
			else if (strcmp(nameptr, "options") == 0)
				port->cmdline_options = pstrdup(valptr);
			else
			{
				/* Assume it's a generic GUC option */
				port->guc_options = lappend(port->guc_options,
											pstrdup(nameptr));
				port->guc_options = lappend(port->guc_options,
											pstrdup(valptr));
			}
			offset = valoffset + strlen(valptr) + 1;
		}

		/*
		 * If we didn't find a packet terminator exactly at the end of the
		 * given packet length, complain.
		 */
		if (offset != len - 1)
			ereport(FATAL,
					(errcode(ERRCODE_PROTOCOL_VIOLATION),
					 errmsg("invalid startup packet layout: expected terminator as last byte")));
	}
	else
	{
		/*
		 * Get the parameters from the old-style, fixed-width-fields startup
		 * packet as C strings.  The packet destination was cleared first so a
		 * short packet has zeros silently added.  We have to be prepared to
		 * truncate the pstrdup result for oversize fields, though.
		 */
		StartupPacket *packet = (StartupPacket *) buf;

		port->database_name = pstrdup(packet->database);
		if (strlen(port->database_name) > sizeof(packet->database))
			port->database_name[sizeof(packet->database)] = '\0';
		port->user_name = pstrdup(packet->user);
		if (strlen(port->user_name) > sizeof(packet->user))
			port->user_name[sizeof(packet->user)] = '\0';
		port->cmdline_options = pstrdup(packet->options);
		if (strlen(port->cmdline_options) > sizeof(packet->options))
			port->cmdline_options[sizeof(packet->options)] = '\0';
		port->guc_options = NIL;
	}

	/* Check a user name was given. */
	if (port->user_name == NULL || port->user_name[0] == '\0')
		ereport(FATAL,
				(errcode(ERRCODE_INVALID_AUTHORIZATION_SPECIFICATION),
			 errmsg("no PostgreSQL user name specified in startup packet")));

	/* The database defaults to the user name. */
	if (port->database_name == NULL || port->database_name[0] == '\0')
		port->database_name = pstrdup(port->user_name);

	if (Db_user_namespace)
	{
		/*
		 * If user@, it is a global user, remove '@'. We only want to do this
		 * if there is an '@' at the end and no earlier in the user string or
		 * they may fake as a local user of another database attaching to this
		 * database.
		 */
		if (strchr(port->user_name, '@') ==
			port->user_name + strlen(port->user_name) - 1)
			*strchr(port->user_name, '@') = '\0';
		else
		{
			/* Append '@' and dbname */
			char	   *db_user;

			db_user = palloc(strlen(port->user_name) +
							 strlen(port->database_name) + 2);
			sprintf(db_user, "%s@%s", port->user_name, port->database_name);
			port->user_name = db_user;
		}
	}

	/*
	 * Truncate given database and user names to length of a Postgres name.
	 * This avoids lookup failures when overlength names are given.
	 */
	if (strlen(port->database_name) >= NAMEDATALEN)
		port->database_name[NAMEDATALEN - 1] = '\0';
	if (strlen(port->user_name) >= NAMEDATALEN)
		port->user_name[NAMEDATALEN - 1] = '\0';

	/*
	 * Done putting stuff in TopMemoryContext.
	 */
	MemoryContextSwitchTo(oldcontext);

	/*
	 * If we're going to reject the connection due to database state, say so
	 * now instead of wasting cycles on an authentication exchange. (This also
	 * allows a pg_ping utility to be written.)
	 */
	switch (port->canAcceptConnections)
	{
		case CAC_STARTUP:
			ereport(FATAL,
					(errcode(ERRCODE_CANNOT_CONNECT_NOW),
					 errmsg("the database system is starting up")));
			break;
		case CAC_SHUTDOWN:
			ereport(FATAL,
					(errcode(ERRCODE_CANNOT_CONNECT_NOW),
					 errmsg("the database system is shutting down")));
			break;
		case CAC_RECOVERY:
			ereport(FATAL,
					(errcode(ERRCODE_CANNOT_CONNECT_NOW),
					 errmsg("the database system is in recovery mode")));
			break;
		case CAC_TOOMANY:
			ereport(FATAL,
					(errcode(ERRCODE_TOO_MANY_CONNECTIONS),
					 errmsg("sorry, too many clients already")));
			break;
		case CAC_WAITBACKUP:
			/* OK for now, will check in InitPostgres */
			break;
		case CAC_OK:
			break;
	}

	return STATUS_OK;
}


/*
 * The client has sent a cancel request packet, not a normal
 * start-a-new-connection packet.  Perform the necessary processing.
 * Nothing is sent back to the client.
 */
static void
processCancelRequest(Port *port, void *pkt)
{
	CancelRequestPacket *canc = (CancelRequestPacket *) pkt;
	int			backendPID;
	long		cancelAuthCode;
	Backend    *bp;

#ifndef EXEC_BACKEND
	Dlelem	   *curr;
#else
	int			i;
#endif

	backendPID = (int) ntohl(canc->backendPID);
	cancelAuthCode = (long) ntohl(canc->cancelAuthCode);

	/*
	 * See if we have a matching backend.  In the EXEC_BACKEND case, we can no
	 * longer access the postmaster's own backend list, and must rely on the
	 * duplicate array in shared memory.
	 */
#ifndef EXEC_BACKEND
	for (curr = DLGetHead(BackendList); curr; curr = DLGetSucc(curr))
	{
		bp = (Backend *) DLE_VAL(curr);
#else
	for (i = 0; i < NUM_BACKENDARRAY_ELEMS; i++)
	{
		bp = (Backend *) &ShmemBackendArray[i];
#endif
		if (bp->pid == backendPID)
		{
			if (bp->cancel_key == cancelAuthCode)
			{
				/* Found a match; signal that backend to cancel current op */
				ereport(DEBUG2,
						(errmsg_internal("processing cancel request: sending SIGINT to process %d",
										 backendPID)));
				signal_child(bp->pid, SIGINT);
			}
			else
				/* Right PID, wrong key: no way, Jose */
				ereport(LOG,
						(errmsg("wrong key in cancel request for process %d",
								backendPID)));
			return;
		}
	}

	/* No matching backend */
	ereport(LOG,
			(errmsg("PID %d in cancel request did not match any process",
					backendPID)));
}

/*
 * canAcceptConnections --- check to see if database state allows connections.
 */
static enum CAC_state
canAcceptConnections(void)
{
	/*
	 * Can't start backends when in startup/shutdown/recovery state.
	 *
	 * In state PM_WAIT_BACKUP only superusers can connect (this must be
	 * allowed so that a superuser can end online backup mode); we return
	 * CAC_WAITBACKUP code to indicate that this must be checked later.
	 */
	if (pmState != PM_RUN)
	{
		if (pmState == PM_WAIT_BACKUP)
			return CAC_WAITBACKUP;	/* allow superusers only */
		if (Shutdown > NoShutdown)
			return CAC_SHUTDOWN;	/* shutdown is pending */
		if (pmState == PM_STARTUP && !FatalError)
			return CAC_STARTUP; /* normal startup */
		return CAC_RECOVERY;	/* else must be crash recovery */
	}

	/*
	 * Don't start too many children.
	 *
	 * We allow more connections than we can have backends here because some
	 * might still be authenticating; they might fail auth, or some existing
	 * backend might exit before the auth cycle is completed. The exact
	 * MaxBackends limit is enforced when a new backend tries to join the
	 * shared-inval backend array.
	 *
	 * In the EXEC_BACKEND case, the limit here must match the size of the
	 * ShmemBackendArray, since all these processes will have cancel codes.
	 */
	if (CountChildren() >= 2 * MaxBackends)
		return CAC_TOOMANY;

	return CAC_OK;
}


/*
 * ConnCreate -- create a local connection data structure
 */
static Port *
ConnCreate(int serverFd)
{
	Port	   *port;

	if (!(port = (Port *) calloc(1, sizeof(Port))))
	{
		ereport(LOG,
				(errcode(ERRCODE_OUT_OF_MEMORY),
				 errmsg("out of memory")));
		ExitPostmaster(1);
	}

	if (StreamConnection(serverFd, port) != STATUS_OK)
	{
		if (port->sock >= 0)
			StreamClose(port->sock);
		ConnFree(port);
		port = NULL;
	}
	else
	{
		/*
		 * Precompute password salt values to use for this connection. It's
		 * slightly annoying to do this long in advance of knowing whether
		 * we'll need 'em or not, but we must do the random() calls before we
		 * fork, not after.  Else the postmaster's random sequence won't get
		 * advanced, and all backends would end up using the same salt...
		 */
		RandomSalt(port->md5Salt);
	}

	/*
	 * Allocate GSSAPI specific state struct
	 */
#ifndef EXEC_BACKEND
#if defined(ENABLE_GSS) || defined(ENABLE_SSPI)
	port->gss = (pg_gssinfo *) calloc(1, sizeof(pg_gssinfo));
	if (!port->gss)
	{
		ereport(LOG,
				(errcode(ERRCODE_OUT_OF_MEMORY),
				 errmsg("out of memory")));
		ExitPostmaster(1);
	}
#endif
#endif

	return port;
}


/*
 * ConnFree -- free a local connection data structure
 */
static void
ConnFree(Port *conn)
{
#ifdef USE_SSL
	secure_close(conn);
#endif
	if (conn->gss)
		free(conn->gss);
	free(conn);
}


/*
 * ClosePostmasterPorts -- close all the postmaster's open sockets
 *
 * This is called during child process startup to release file descriptors
 * that are not needed by that child process.  The postmaster still has
 * them open, of course.
 *
 * Note: we pass am_syslogger as a boolean because we don't want to set
 * the global variable yet when this is called.
 */
void
ClosePostmasterPorts(bool am_syslogger)
{
	int			i;

	/* Close the listen sockets */
	for (i = 0; i < MAXLISTEN; i++)
	{
		if (ListenSocket[i] != -1)
		{
			StreamClose(ListenSocket[i]);
			ListenSocket[i] = -1;
		}
	}

	/* If using syslogger, close the read side of the pipe */
	if (!am_syslogger)
	{
#ifndef WIN32
		if (syslogPipe[0] >= 0)
			close(syslogPipe[0]);
		syslogPipe[0] = -1;
#else
		if (syslogPipe[0])
			CloseHandle(syslogPipe[0]);
		syslogPipe[0] = 0;
#endif
	}
}


/*
 * reset_shared -- reset shared memory and semaphores
 */
static void
reset_shared(int port)
{
	/*
	 * Create or re-create shared memory and semaphores.
	 *
	 * Note: in each "cycle of life" we will normally assign the same IPC keys
	 * (if using SysV shmem and/or semas), since the port number is used to
	 * determine IPC keys.	This helps ensure that we will clean up dead IPC
	 * objects if the postmaster crashes and is restarted.
	 */
	CreateSharedMemoryAndSemaphores(false, port);
}


/*
 * SIGHUP -- reread config files, and tell children to do same
 */
static void
SIGHUP_handler(SIGNAL_ARGS)
{
	int			save_errno = errno;

	PG_SETMASK(&BlockSig);

	if (Shutdown <= SmartShutdown)
	{
		ereport(LOG,
				(errmsg("received SIGHUP, reloading configuration files")));
		ProcessConfigFile(PGC_SIGHUP);
		SignalChildren(SIGHUP);
		if (BgWriterPID != 0)
			signal_child(BgWriterPID, SIGHUP);
		if (WalWriterPID != 0)
			signal_child(WalWriterPID, SIGHUP);
		if (AutoVacPID != 0)
			signal_child(AutoVacPID, SIGHUP);
		if (PgArchPID != 0)
			signal_child(PgArchPID, SIGHUP);
		if (SysLoggerPID != 0)
			signal_child(SysLoggerPID, SIGHUP);
		if (PgStatPID != 0)
			signal_child(PgStatPID, SIGHUP);

		/* Reload authentication config files too */
		if (!load_hba())
			ereport(WARNING,
					(errmsg("pg_hba.conf not reloaded")));

		load_ident();

#ifdef EXEC_BACKEND
		/* Update the starting-point file for future children */
		write_nondefault_variables(PGC_SIGHUP);
#endif
	}

	PG_SETMASK(&UnBlockSig);

	errno = save_errno;
}


/*
 * pmdie -- signal handler for processing various postmaster signals.
 */
static void
pmdie(SIGNAL_ARGS)
{
	int			save_errno = errno;

	PG_SETMASK(&BlockSig);

	ereport(DEBUG2,
			(errmsg_internal("postmaster received signal %d",
							 postgres_signal_arg)));

	switch (postgres_signal_arg)
	{
		case SIGTERM:

			/*
			 * Smart Shutdown:
			 *
			 * Wait for children to end their work, then shut down.
			 */
			if (Shutdown >= SmartShutdown)
				break;
			Shutdown = SmartShutdown;
			ereport(LOG,
					(errmsg("received smart shutdown request")));

			if (pmState == PM_RUN)
			{
				/* autovacuum workers are told to shut down immediately */
				SignalAutovacWorkers(SIGTERM);
				/* and the autovac launcher too */
				if (AutoVacPID != 0)
					signal_child(AutoVacPID, SIGTERM);
				/* and the walwriter too */
				if (WalWriterPID != 0)
					signal_child(WalWriterPID, SIGTERM);
				pmState = PM_WAIT_BACKUP;
			}

			/*
			 * Now wait for online backup mode to end and
			 * backends to exit.  If that is already the case,
			 * PostmasterStateMachine will take the next step.
			 */
			PostmasterStateMachine();
			break;

		case SIGINT:

			/*
			 * Fast Shutdown:
			 *
			 * Abort all children with SIGTERM (rollback active transactions
			 * and exit) and shut down when they are gone.
			 */
			if (Shutdown >= FastShutdown)
				break;
			Shutdown = FastShutdown;
			ereport(LOG,
					(errmsg("received fast shutdown request")));

			if (StartupPID != 0)
				signal_child(StartupPID, SIGTERM);
			if (pmState == PM_RUN || pmState == PM_WAIT_BACKUP)
			{
				ereport(LOG,
						(errmsg("aborting any active transactions")));
				/* shut down all backends and autovac workers */
				SignalChildren(SIGTERM);
				/* and the autovac launcher too */
				if (AutoVacPID != 0)
					signal_child(AutoVacPID, SIGTERM);
				/* and the walwriter too */
				if (WalWriterPID != 0)
					signal_child(WalWriterPID, SIGTERM);
				pmState = PM_WAIT_BACKENDS;
			}

			/*
			 * Now wait for backends to exit.  If there are none,
			 * PostmasterStateMachine will take the next step.
			 */
			PostmasterStateMachine();
			break;

		case SIGQUIT:

			/*
			 * Immediate Shutdown:
			 *
			 * abort all children with SIGQUIT and exit without attempt to
			 * properly shut down data base system.
			 */
			ereport(LOG,
					(errmsg("received immediate shutdown request")));
			SignalChildren(SIGQUIT);
			if (StartupPID != 0)
				signal_child(StartupPID, SIGQUIT);
			if (BgWriterPID != 0)
				signal_child(BgWriterPID, SIGQUIT);
			if (WalWriterPID != 0)
				signal_child(WalWriterPID, SIGQUIT);
			if (AutoVacPID != 0)
				signal_child(AutoVacPID, SIGQUIT);
			if (PgArchPID != 0)
				signal_child(PgArchPID, SIGQUIT);
			if (PgStatPID != 0)
				signal_child(PgStatPID, SIGQUIT);
			ExitPostmaster(0);
			break;
	}

	PG_SETMASK(&UnBlockSig);

	errno = save_errno;
}

/*
 * Reaper -- signal handler to cleanup after a child process dies.
 */
static void
reaper(SIGNAL_ARGS)
{
	int			save_errno = errno;
	int			pid;			/* process id of dead child process */
	int			exitstatus;		/* its exit status */

	/* These macros hide platform variations in getting child status */
#ifdef HAVE_WAITPID
	int			status;			/* child exit status */

#define LOOPTEST()		((pid = waitpid(-1, &status, WNOHANG)) > 0)
#define LOOPHEADER()	(exitstatus = status)
#else							/* !HAVE_WAITPID */
#ifndef WIN32
	union wait	status;			/* child exit status */

#define LOOPTEST()		((pid = wait3(&status, WNOHANG, NULL)) > 0)
#define LOOPHEADER()	(exitstatus = status.w_status)
#else							/* WIN32 */
#define LOOPTEST()		((pid = win32_waitpid(&exitstatus)) > 0)
#define LOOPHEADER()
#endif   /* WIN32 */
#endif   /* HAVE_WAITPID */

	PG_SETMASK(&BlockSig);

	ereport(DEBUG4,
			(errmsg_internal("reaping dead processes")));

	while (LOOPTEST())
	{
		LOOPHEADER();

		/*
		 * Check if this child was a startup process.
		 */
		if (pid == StartupPID)
		{
			StartupPID = 0;
			Assert(pmState == PM_STARTUP);

			/* FATAL exit of startup is treated as catastrophic */
			if (!EXIT_STATUS_0(exitstatus))
			{
				LogChildExit(LOG, _("startup process"),
							 pid, exitstatus);
				ereport(LOG,
				(errmsg("aborting startup due to startup process failure")));
				ExitPostmaster(1);
			}

			/*
			 * Startup succeeded - we are done with system startup or
			 * recovery.
			 */
			FatalError = false;

			/*
			 * Go to shutdown mode if a shutdown request was pending.
			 */
			if (Shutdown > NoShutdown)
			{
				pmState = PM_WAIT_BACKENDS;
				/* PostmasterStateMachine logic does the rest */
				continue;
			}

			/*
			 * Otherwise, commence normal operations.
			 */
			pmState = PM_RUN;

			/*
			 * Load the flat authorization file into postmaster's cache. The
			 * startup process has recomputed this from the database contents,
			 * so we wait till it finishes before loading it.
			 */
			load_role();

			/*
			 * Crank up the background writer.	It doesn't matter if this
			 * fails, we'll just try again later.
			 */
			Assert(BgWriterPID == 0);
			BgWriterPID = StartBackgroundWriter();

			/*
			 * Likewise, start other special children as needed.  In a restart
			 * situation, some of them may be alive already.
			 */
			if (WalWriterPID == 0)
				WalWriterPID = StartWalWriter();
			if (AutoVacuumingActive() && AutoVacPID == 0)
				AutoVacPID = StartAutoVacLauncher();
			if (XLogArchivingActive() && PgArchPID == 0)
				PgArchPID = pgarch_start();
			if (PgStatPID == 0)
				PgStatPID = pgstat_start();

			/* at this point we are really open for business */
			ereport(LOG,
				 (errmsg("database system is ready to accept connections")));

			continue;
		}

		/*
		 * Was it the bgwriter?
		 */
		if (pid == BgWriterPID)
		{
			BgWriterPID = 0;
			if (EXIT_STATUS_0(exitstatus) && pmState == PM_SHUTDOWN)
			{
				/*
				 * OK, we saw normal exit of the bgwriter after it's been told
				 * to shut down.  We expect that it wrote a shutdown
				 * checkpoint.	(If for some reason it didn't, recovery will
				 * occur on next postmaster start.)
				 *
				 * At this point we should have no normal backend children
				 * left (else we'd not be in PM_SHUTDOWN state) but we might
				 * have dead_end children to wait for.
				 *
				 * If we have an archiver subprocess, tell it to do a last
				 * archive cycle and quit; otherwise we can go directly to
				 * PM_WAIT_DEAD_END state.
				 */
				Assert(Shutdown > NoShutdown);

				if (PgArchPID != 0)
				{
					/* Waken archiver for the last time */
					signal_child(PgArchPID, SIGUSR2);
					pmState = PM_SHUTDOWN_2;
				}
				else
					pmState = PM_WAIT_DEAD_END;

				/*
				 * We can also shut down the stats collector now; there's
				 * nothing left for it to do.
				 */
				if (PgStatPID != 0)
					signal_child(PgStatPID, SIGQUIT);
			}
			else
			{
				/*
				 * Any unexpected exit of the bgwriter (including FATAL exit)
				 * is treated as a crash.
				 */
				HandleChildCrash(pid, exitstatus,
								 _("background writer process"));
			}

			continue;
		}

		/*
		 * Was it the wal writer?  Normal exit can be ignored; we'll start a
		 * new one at the next iteration of the postmaster's main loop, if
		 * necessary.  Any other exit condition is treated as a crash.
		 */
		if (pid == WalWriterPID)
		{
			WalWriterPID = 0;
			if (!EXIT_STATUS_0(exitstatus))
				HandleChildCrash(pid, exitstatus,
								 _("WAL writer process"));
			continue;
		}

		/*
		 * Was it the autovacuum launcher?	Normal exit can be ignored; we'll
		 * start a new one at the next iteration of the postmaster's main
		 * loop, if necessary.	Any other exit condition is treated as a
		 * crash.
		 */
		if (pid == AutoVacPID)
		{
			AutoVacPID = 0;
			if (!EXIT_STATUS_0(exitstatus))
				HandleChildCrash(pid, exitstatus,
								 _("autovacuum launcher process"));
			continue;
		}

		/*
		 * Was it the archiver?  If so, just try to start a new one; no need
		 * to force reset of the rest of the system.  (If fail, we'll try
		 * again in future cycles of the main loop.)  But if we were waiting
		 * for it to shut down, advance to the next shutdown step.
		 */
		if (pid == PgArchPID)
		{
			PgArchPID = 0;
			if (!EXIT_STATUS_0(exitstatus))
				LogChildExit(LOG, _("archiver process"),
							 pid, exitstatus);
			if (XLogArchivingActive() && pmState == PM_RUN)
				PgArchPID = pgarch_start();
			else if (pmState == PM_SHUTDOWN_2)
				pmState = PM_WAIT_DEAD_END;
			continue;
		}

		/*
		 * Was it the statistics collector?  If so, just try to start a new
		 * one; no need to force reset of the rest of the system.  (If fail,
		 * we'll try again in future cycles of the main loop.)
		 */
		if (pid == PgStatPID)
		{
			PgStatPID = 0;
			if (!EXIT_STATUS_0(exitstatus))
				LogChildExit(LOG, _("statistics collector process"),
							 pid, exitstatus);
			if (pmState == PM_RUN)
				PgStatPID = pgstat_start();
			continue;
		}

		/* Was it the system logger?  If so, try to start a new one */
		if (pid == SysLoggerPID)
		{
			SysLoggerPID = 0;
			/* for safety's sake, launch new logger *first* */
			SysLoggerPID = SysLogger_Start();
			if (!EXIT_STATUS_0(exitstatus))
				LogChildExit(LOG, _("system logger process"),
							 pid, exitstatus);
			continue;
		}

		/*
		 * Else do standard backend child cleanup.
		 */
		CleanupBackend(pid, exitstatus);
	}							/* loop over pending child-death reports */

	/*
	 * After cleaning out the SIGCHLD queue, see if we have any state changes
	 * or actions to make.
	 */
	PostmasterStateMachine();

	/* Done with signal handler */
	PG_SETMASK(&UnBlockSig);

	errno = save_errno;
}


/*
 * CleanupBackend -- cleanup after terminated backend.
 *
 * Remove all local state associated with backend.
 */
static void
CleanupBackend(int pid,
			   int exitstatus)	/* child's exit status. */
{
	Dlelem	   *curr;

	LogChildExit(DEBUG2, _("server process"), pid, exitstatus);

	/*
	 * If a backend dies in an ugly way then we must signal all other backends
	 * to quickdie.  If exit status is zero (normal) or one (FATAL exit), we
	 * assume everything is all right and simply remove the backend from the
	 * active backend list.
	 */
	if (!EXIT_STATUS_0(exitstatus) && !EXIT_STATUS_1(exitstatus))
	{
		HandleChildCrash(pid, exitstatus, _("server process"));
		return;
	}

	for (curr = DLGetHead(BackendList); curr; curr = DLGetSucc(curr))
	{
		Backend    *bp = (Backend *) DLE_VAL(curr);

		if (bp->pid == pid)
		{
#ifdef EXEC_BACKEND
			if (!bp->dead_end)
				ShmemBackendArrayRemove(pid);
#endif
			DLRemove(curr);
			free(bp);
			DLFreeElem(curr);
			break;
		}
	}
}

/*
 * HandleChildCrash -- cleanup after failed backend, bgwriter, walwriter,
 * or autovacuum.
 *
 * The objectives here are to clean up our local state about the child
 * process, and to signal all other remaining children to quickdie.
 */
static void
HandleChildCrash(int pid, int exitstatus, const char *procname)
{
	Dlelem	   *curr,
			   *next;
	Backend    *bp;

	/*
	 * Make log entry unless there was a previous crash (if so, nonzero exit
	 * status is to be expected in SIGQUIT response; don't clutter log)
	 */
	if (!FatalError)
	{
		LogChildExit(LOG, procname, pid, exitstatus);
		ereport(LOG,
				(errmsg("terminating any other active server processes")));
	}

	/* Process regular backends */
	for (curr = DLGetHead(BackendList); curr; curr = next)
	{
		next = DLGetSucc(curr);
		bp = (Backend *) DLE_VAL(curr);
		if (bp->pid == pid)
		{
			/*
			 * Found entry for freshly-dead backend, so remove it.
			 */
#ifdef EXEC_BACKEND
			if (!bp->dead_end)
				ShmemBackendArrayRemove(pid);
#endif
			DLRemove(curr);
			free(bp);
			DLFreeElem(curr);
			/* Keep looping so we can signal remaining backends */
		}
		else
		{
			/*
			 * This backend is still alive.  Unless we did so already, tell it
			 * to commit hara-kiri.
			 *
			 * SIGQUIT is the special signal that says exit without proc_exit
			 * and let the user know what's going on. But if SendStop is set
			 * (-s on command line), then we send SIGSTOP instead, so that we
			 * can get core dumps from all backends by hand.
			 *
			 * We could exclude dead_end children here, but at least in the
			 * SIGSTOP case it seems better to include them.
			 */
			if (!FatalError)
			{
				ereport(DEBUG2,
						(errmsg_internal("sending %s to process %d",
										 (SendStop ? "SIGSTOP" : "SIGQUIT"),
										 (int) bp->pid)));
				signal_child(bp->pid, (SendStop ? SIGSTOP : SIGQUIT));
			}
		}
	}

	/* Take care of the bgwriter too */
	if (pid == BgWriterPID)
		BgWriterPID = 0;
	else if (BgWriterPID != 0 && !FatalError)
	{
		ereport(DEBUG2,
				(errmsg_internal("sending %s to process %d",
								 (SendStop ? "SIGSTOP" : "SIGQUIT"),
								 (int) BgWriterPID)));
		signal_child(BgWriterPID, (SendStop ? SIGSTOP : SIGQUIT));
	}

	/* Take care of the walwriter too */
	if (pid == WalWriterPID)
		WalWriterPID = 0;
	else if (WalWriterPID != 0 && !FatalError)
	{
		ereport(DEBUG2,
				(errmsg_internal("sending %s to process %d",
								 (SendStop ? "SIGSTOP" : "SIGQUIT"),
								 (int) WalWriterPID)));
		signal_child(WalWriterPID, (SendStop ? SIGSTOP : SIGQUIT));
	}

	/* Take care of the autovacuum launcher too */
	if (pid == AutoVacPID)
		AutoVacPID = 0;
	else if (AutoVacPID != 0 && !FatalError)
	{
		ereport(DEBUG2,
				(errmsg_internal("sending %s to process %d",
								 (SendStop ? "SIGSTOP" : "SIGQUIT"),
								 (int) AutoVacPID)));
		signal_child(AutoVacPID, (SendStop ? SIGSTOP : SIGQUIT));
	}

	/*
	 * Force a power-cycle of the pgarch process too.  (This isn't absolutely
	 * necessary, but it seems like a good idea for robustness, and it
	 * simplifies the state-machine logic in the case where a shutdown request
	 * arrives during crash processing.)
	 */
	if (PgArchPID != 0 && !FatalError)
	{
		ereport(DEBUG2,
				(errmsg_internal("sending %s to process %d",
								 "SIGQUIT",
								 (int) PgArchPID)));
		signal_child(PgArchPID, SIGQUIT);
	}

	/*
	 * Force a power-cycle of the pgstat process too.  (This isn't absolutely
	 * necessary, but it seems like a good idea for robustness, and it
	 * simplifies the state-machine logic in the case where a shutdown request
	 * arrives during crash processing.)
	 */
	if (PgStatPID != 0 && !FatalError)
	{
		ereport(DEBUG2,
				(errmsg_internal("sending %s to process %d",
								 "SIGQUIT",
								 (int) PgStatPID)));
		signal_child(PgStatPID, SIGQUIT);
		allow_immediate_pgstat_restart();
	}

	/* We do NOT restart the syslogger */

	FatalError = true;
	/* We now transit into a state of waiting for children to die */
	if (pmState == PM_RUN ||
		pmState == PM_WAIT_BACKUP ||
		pmState == PM_SHUTDOWN)
		pmState = PM_WAIT_BACKENDS;
}

/*
 * Log the death of a child process.
 */
static void
LogChildExit(int lev, const char *procname, int pid, int exitstatus)
{
	if (WIFEXITED(exitstatus))
		ereport(lev,

		/*------
		  translator: %s is a noun phrase describing a child process, such as
		  "server process" */
				(errmsg("%s (PID %d) exited with exit code %d",
						procname, pid, WEXITSTATUS(exitstatus))));
	else if (WIFSIGNALED(exitstatus))
#if defined(WIN32)
		ereport(lev,

		/*------
		  translator: %s is a noun phrase describing a child process, such as
		  "server process" */
				(errmsg("%s (PID %d) was terminated by exception 0x%X",
						procname, pid, WTERMSIG(exitstatus)),
				 errhint("See C include file \"ntstatus.h\" for a description of the hexadecimal value.")));
#elif defined(HAVE_DECL_SYS_SIGLIST) && HAVE_DECL_SYS_SIGLIST
	ereport(lev,

	/*------
	  translator: %s is a noun phrase describing a child process, such as
	  "server process" */
			(errmsg("%s (PID %d) was terminated by signal %d: %s",
					procname, pid, WTERMSIG(exitstatus),
					WTERMSIG(exitstatus) < NSIG ?
					sys_siglist[WTERMSIG(exitstatus)] : "(unknown)")));
#else
		ereport(lev,

		/*------
		  translator: %s is a noun phrase describing a child process, such as
		  "server process" */
				(errmsg("%s (PID %d) was terminated by signal %d",
						procname, pid, WTERMSIG(exitstatus))));
#endif
	else
		ereport(lev,

		/*------
		  translator: %s is a noun phrase describing a child process, such as
		  "server process" */
				(errmsg("%s (PID %d) exited with unrecognized status %d",
						procname, pid, exitstatus)));
}

/*
 * Advance the postmaster's state machine and take actions as appropriate
 *
 * This is common code for pmdie() and reaper(), which receive the signals
 * that might mean we need to change state.
 */
static void
PostmasterStateMachine(void)
{
	if (pmState == PM_WAIT_BACKUP)
	{
		/*
		 * PM_WAIT_BACKUP state ends when online backup mode is not active.
		 */
		if (!BackupInProgress())
			pmState = PM_WAIT_BACKENDS;
	}

	/*
	 * If we are in a state-machine state that implies waiting for backends to
	 * exit, see if they're all gone, and change state if so.
	 */
	if (pmState == PM_WAIT_BACKENDS)
	{
		/*
		 * PM_WAIT_BACKENDS state ends when we have no regular backends
		 * (including autovac workers) and no walwriter or autovac launcher.
		 * If we are doing crash recovery then we expect the bgwriter to exit
		 * too, otherwise not.	The archiver, stats, and syslogger processes
		 * are disregarded since they are not connected to shared memory; we
		 * also disregard dead_end children here.
		 */
		if (CountChildren() == 0 &&
			StartupPID == 0 &&
			(BgWriterPID == 0 || !FatalError) &&
			WalWriterPID == 0 &&
			AutoVacPID == 0)
		{
			if (FatalError)
			{
				/*
				 * Start waiting for dead_end children to die.	This state
				 * change causes ServerLoop to stop creating new ones.
				 */
				pmState = PM_WAIT_DEAD_END;

				/*
				 * We already SIGQUIT'd the archiver and stats processes,
				 * if any, when we entered FatalError state.
				 */
			}
			else
			{
				/*
				 * If we get here, we are proceeding with normal shutdown. All
				 * the regular children are gone, and it's time to tell the
				 * bgwriter to do a shutdown checkpoint.
				 */
				Assert(Shutdown > NoShutdown);
				/* Start the bgwriter if not running */
				if (BgWriterPID == 0)
					BgWriterPID = StartBackgroundWriter();
				/* And tell it to shut down */
				if (BgWriterPID != 0)
				{
					signal_child(BgWriterPID, SIGUSR2);
					pmState = PM_SHUTDOWN;
				}
				else
				{
					/*
					 * If we failed to fork a bgwriter, just shut down. Any
					 * required cleanup will happen at next restart. We set
					 * FatalError so that an "abnormal shutdown" message gets
					 * logged when we exit.
					 */
					FatalError = true;
					pmState = PM_WAIT_DEAD_END;

					/* Kill the archiver and stats collector too */
					if (PgArchPID != 0)
						signal_child(PgArchPID, SIGQUIT);
					if (PgStatPID != 0)
						signal_child(PgStatPID, SIGQUIT);
				}
			}
		}
	}

	if (pmState == PM_WAIT_DEAD_END)
	{
		/*
		 * PM_WAIT_DEAD_END state ends when the BackendList is entirely empty
		 * (ie, no dead_end children remain), and the archiver and stats
		 * collector are gone too.
		 *
		 * The reason we wait for those two is to protect them against a new
		 * postmaster starting conflicting subprocesses; this isn't an
		 * ironclad protection, but it at least helps in the
		 * shutdown-and-immediately-restart scenario.  Note that they have
		 * already been sent appropriate shutdown signals, either during a
		 * normal state transition leading up to PM_WAIT_DEAD_END, or during
		 * FatalError processing.
		 */
		if (DLGetHead(BackendList) == NULL &&
			PgArchPID == 0 && PgStatPID == 0)
		{
			/* These other guys should be dead already */
			Assert(StartupPID == 0);
			Assert(BgWriterPID == 0);
			Assert(WalWriterPID == 0);
			Assert(AutoVacPID == 0);
			/* syslogger is not considered here */
			pmState = PM_NO_CHILDREN;
		}
	}

	/*
	 * If we've been told to shut down, we exit as soon as there are no
	 * remaining children.	If there was a crash, cleanup will occur at the
	 * next startup.  (Before PostgreSQL 8.3, we tried to recover from the
	 * crash before exiting, but that seems unwise if we are quitting because
	 * we got SIGTERM from init --- there may well not be time for recovery
	 * before init decides to SIGKILL us.)
	 *
	 * Note that the syslogger continues to run.  It will exit when it sees
	 * EOF on its input pipe, which happens when there are no more upstream
	 * processes.
	 */
	if (Shutdown > NoShutdown && pmState == PM_NO_CHILDREN)
	{
		if (FatalError)
		{
			ereport(LOG, (errmsg("abnormal database system shutdown")));
			ExitPostmaster(1);
		}
		else
		{
			/*
			 * Terminate backup mode to avoid recovery after a
			 * clean fast shutdown.
			 */
			CancelBackup();

			/* Normal exit from the postmaster is here */
			ExitPostmaster(0);
		}
	}

	/*
	 * If we need to recover from a crash, wait for all non-syslogger
	 * children to exit, then reset shmem and StartupDataBase.
	 */
	if (FatalError && pmState == PM_NO_CHILDREN)
	{
		ereport(LOG,
				(errmsg("all server processes terminated; reinitializing")));

		shmem_exit(0);
		reset_shared(PostPortNumber);

		StartupPID = StartupDataBase();
		Assert(StartupPID != 0);
		pmState = PM_STARTUP;
	}
}


/*
 * Send a signal to a postmaster child process
 *
 * On systems that have setsid(), each child process sets itself up as a
 * process group leader.  For signals that are generally interpreted in the
 * appropriate fashion, we signal the entire process group not just the
 * direct child process.  This allows us to, for example, SIGQUIT a blocked
 * archive_recovery script, or SIGINT a script being run by a backend via
 * system().
 *
 * There is a race condition for recently-forked children: they might not
 * have executed setsid() yet.	So we signal the child directly as well as
 * the group.  We assume such a child will handle the signal before trying
 * to spawn any grandchild processes.  We also assume that signaling the
 * child twice will not cause any problems.
 */
static void
signal_child(pid_t pid, int signal)
{
	if (kill(pid, signal) < 0)
		elog(DEBUG3, "kill(%ld,%d) failed: %m", (long) pid, signal);
#ifdef HAVE_SETSID
	switch (signal)
	{
		case SIGINT:
		case SIGTERM:
		case SIGQUIT:
		case SIGSTOP:
			if (kill(-pid, signal) < 0)
				elog(DEBUG3, "kill(%ld,%d) failed: %m", (long) (-pid), signal);
			break;
		default:
			break;
	}
#endif
}

/*
 * Send a signal to all backend children, including autovacuum workers
 * (but NOT special children; dead_end children are never signaled, either).
 * If only_autovac is TRUE, only the autovacuum worker processes are signalled.
 */
static void
SignalSomeChildren(int signal, bool only_autovac)
{
	Dlelem	   *curr;

	for (curr = DLGetHead(BackendList); curr; curr = DLGetSucc(curr))
	{
		Backend    *bp = (Backend *) DLE_VAL(curr);

		if (bp->dead_end)
			continue;
		if (only_autovac && !bp->is_autovacuum)
			continue;

		ereport(DEBUG4,
				(errmsg_internal("sending signal %d to process %d",
								 signal, (int) bp->pid)));
		signal_child(bp->pid, signal);
	}
}

/*
 * BackendStartup -- start backend process
 *
 * returns: STATUS_ERROR if the fork failed, STATUS_OK otherwise.
 *
 * Note: if you change this code, also consider StartAutovacuumWorker.
 */
static int
BackendStartup(Port *port)
{
	Backend    *bn;				/* for backend cleanup */
	pid_t		pid;

	/*
	 * Compute the cancel key that will be assigned to this backend. The
	 * backend will have its own copy in the forked-off process' value of
	 * MyCancelKey, so that it can transmit the key to the frontend.
	 */
	MyCancelKey = PostmasterRandom();

	/*
	 * Make room for backend data structure.  Better before the fork() so we
	 * can handle failure cleanly.
	 */
	bn = (Backend *) malloc(sizeof(Backend));
	if (!bn)
	{
		ereport(LOG,
				(errcode(ERRCODE_OUT_OF_MEMORY),
				 errmsg("out of memory")));
		return STATUS_ERROR;
	}

	/* Pass down canAcceptConnections state */
	port->canAcceptConnections = canAcceptConnections();

#ifdef EXEC_BACKEND
	pid = backend_forkexec(port);
#else							/* !EXEC_BACKEND */
	pid = fork_process();
	if (pid == 0)				/* child */
	{
		free(bn);

		/*
		 * Let's clean up ourselves as the postmaster child, and close the
		 * postmaster's listen sockets.  (In EXEC_BACKEND case this is all
		 * done in SubPostmasterMain.)
		 */
		IsUnderPostmaster = true;		/* we are a postmaster subprocess now */

		MyProcPid = getpid();	/* reset MyProcPid */

		MyStartTime = time(NULL);

		/* We don't want the postmaster's proc_exit() handlers */
		on_exit_reset();

		/* Close the postmaster's sockets */
		ClosePostmasterPorts(false);

		/* Perform additional initialization and client authentication */
		BackendInitialize(port);

		/* And run the backend */
		proc_exit(BackendRun(port));
	}
#endif   /* EXEC_BACKEND */

	if (pid < 0)
	{
		/* in parent, fork failed */
		int			save_errno = errno;

		free(bn);
		errno = save_errno;
		ereport(LOG,
				(errmsg("could not fork new process for connection: %m")));
		report_fork_failure_to_client(port, save_errno);
		return STATUS_ERROR;
	}

	/* in parent, successful fork */
	ereport(DEBUG2,
			(errmsg_internal("forked new backend, pid=%d socket=%d",
							 (int) pid, port->sock)));

	/*
	 * Everything's been successful, it's safe to add this backend to our list
	 * of backends.
	 */
	bn->pid = pid;
	bn->cancel_key = MyCancelKey;
	bn->is_autovacuum = false;
	bn->dead_end = (port->canAcceptConnections != CAC_OK &&
					port->canAcceptConnections != CAC_WAITBACKUP);
	DLAddHead(BackendList, DLNewElem(bn));
#ifdef EXEC_BACKEND
	if (!bn->dead_end)
		ShmemBackendArrayAdd(bn);
#endif

	return STATUS_OK;
}

/*
 * Try to report backend fork() failure to client before we close the
 * connection.	Since we do not care to risk blocking the postmaster on
 * this connection, we set the connection to non-blocking and try only once.
 *
 * This is grungy special-purpose code; we cannot use backend libpq since
 * it's not up and running.
 */
static void
report_fork_failure_to_client(Port *port, int errnum)
{
	char		buffer[1000];
	int			rc;

	/* Format the error message packet (always V2 protocol) */
	snprintf(buffer, sizeof(buffer), "E%s%s\n",
			 _("could not fork new process for connection: "),
			 strerror(errnum));

	/* Set port to non-blocking.  Don't do send() if this fails */
	if (!pg_set_noblock(port->sock))
		return;

	/* We'll retry after EINTR, but ignore all other failures */
	do
	{
		rc = send(port->sock, buffer, strlen(buffer) + 1, 0);
	} while (rc < 0 && errno == EINTR);
}


/*
 * split_opts -- split a string of options and append it to an argv array
 *
 * NB: the string is destructively modified!
 *
 * Since no current POSTGRES arguments require any quoting characters,
 * we can use the simple-minded tactic of assuming each set of space-
 * delimited characters is a separate argv element.
 *
 * If you don't like that, well, we *used* to pass the whole option string
 * as ONE argument to execl(), which was even less intelligent...
 */
static void
split_opts(char **argv, int *argcp, char *s)
{
	while (s && *s)
	{
		while (isspace((unsigned char) *s))
			++s;
		if (*s == '\0')
			break;
		argv[(*argcp)++] = s;
		while (*s && !isspace((unsigned char) *s))
			++s;
		if (*s)
			*s++ = '\0';
	}
}


/*
 * BackendInitialize -- initialize an interactive (postmaster-child)
 *				backend process, and perform client authentication.
 *
 * returns: nothing.  Will not return at all if there's any failure.
 *
 * Note: this code does not depend on having any access to shared memory.
 * In the EXEC_BACKEND case, we are physically attached to shared memory
 * but have not yet set up most of our local pointers to shmem structures.
 */
static void
BackendInitialize(Port *port)
{
	int			status;
	char		remote_host[NI_MAXHOST];
	char		remote_port[NI_MAXSERV];
	char		remote_ps_data[NI_MAXHOST];

	/* Save port etc. for ps status */
	MyProcPort = port;

	/*
	 * PreAuthDelay is a debugging aid for investigating problems in the
	 * authentication cycle: it can be set in postgresql.conf to allow time to
	 * attach to the newly-forked backend with a debugger. (See also the -W
	 * backend switch, which we allow clients to pass through PGOPTIONS, but
	 * it is not honored until after authentication.)
	 */
	if (PreAuthDelay > 0)
		pg_usleep(PreAuthDelay * 1000000L);

	ClientAuthInProgress = true;	/* limit visibility of log messages */

	/* save process start time */
	port->SessionStartTime = GetCurrentTimestamp();
	MyStartTime = timestamptz_to_time_t(port->SessionStartTime);

	/* set these to empty in case they are needed before we set them up */
	port->remote_host = "";
	port->remote_port = "";

	/*
	 * Initialize libpq and enable reporting of ereport errors to the client.
	 * Must do this now because authentication uses libpq to send messages.
	 */
	pq_init();					/* initialize libpq to talk to client */
	whereToSendOutput = DestRemote;		/* now safe to ereport to client */

	/*
	 * If possible, make this process a group leader, so that the postmaster
	 * can signal any child processes too.	(We do this now on the off chance
	 * that something might spawn a child process during authentication.)
	 */
#ifdef HAVE_SETSID
	if (setsid() < 0)
		elog(FATAL, "setsid() failed: %m");
#endif

	/*
	 * We arrange for a simple exit(1) if we receive SIGTERM or SIGQUIT during
	 * any client authentication related communication. Otherwise the
	 * postmaster cannot shutdown the database FAST or IMMED cleanly if a
	 * buggy client blocks a backend during authentication.
	 */
	pqsignal(SIGTERM, authdie);
	pqsignal(SIGQUIT, authdie);
	pqsignal(SIGALRM, authdie);
	PG_SETMASK(&AuthBlockSig);

	/*
	 * Get the remote host name and port for logging and status display.
	 */
	remote_host[0] = '\0';
	remote_port[0] = '\0';
	if (pg_getnameinfo_all(&port->raddr.addr, port->raddr.salen,
						   remote_host, sizeof(remote_host),
						   remote_port, sizeof(remote_port),
					   (log_hostname ? 0 : NI_NUMERICHOST) | NI_NUMERICSERV))
	{
		int			ret = pg_getnameinfo_all(&port->raddr.addr, port->raddr.salen,
											 remote_host, sizeof(remote_host),
											 remote_port, sizeof(remote_port),
											 NI_NUMERICHOST | NI_NUMERICSERV);

		if (ret)
			ereport(WARNING,
					(errmsg_internal("pg_getnameinfo_all() failed: %s",
									 gai_strerror(ret))));
	}
	snprintf(remote_ps_data, sizeof(remote_ps_data),
			 remote_port[0] == '\0' ? "%s" : "%s(%s)",
			 remote_host, remote_port);

	if (Log_connections)
		ereport(LOG,
				(errmsg("connection received: host=%s%s%s",
						remote_host, remote_port[0] ? " port=" : "",
						remote_port)));

	/*
	 * save remote_host and remote_port in port structure
	 */
	port->remote_host = strdup(remote_host);
	port->remote_port = strdup(remote_port);

	/*
	 * In EXEC_BACKEND case, we didn't inherit the contents of pg_hba.conf
	 * etcetera from the postmaster, and have to load them ourselves. Build
	 * the PostmasterContext (which didn't exist before, in this process) to
	 * contain the data.
	 *
	 * FIXME: [fork/exec] Ugh.	Is there a way around this overhead?
	 */
#ifdef EXEC_BACKEND
	Assert(PostmasterContext == NULL);
	PostmasterContext = AllocSetContextCreate(TopMemoryContext,
											  "Postmaster",
											  ALLOCSET_DEFAULT_MINSIZE,
											  ALLOCSET_DEFAULT_INITSIZE,
											  ALLOCSET_DEFAULT_MAXSIZE);
	MemoryContextSwitchTo(PostmasterContext);

	if (!load_hba())
	{
		/* 
		 * It makes no sense continue if we fail to load the HBA file, since 
		 * there is no way to connect to the database in this case.
		 */
		ereport(FATAL,
				(errmsg("could not load pg_hba.conf")));
	}
	load_ident();
	load_role();
#endif

	/*
	 * Ready to begin client interaction.  We will give up and exit(0) after a
	 * time delay, so that a broken client can't hog a connection
	 * indefinitely.  PreAuthDelay doesn't count against the time limit.
	 */
	if (!enable_sig_alarm(AuthenticationTimeout * 1000, false))
		elog(FATAL, "could not set timer for authorization timeout");

	/*
	 * Receive the startup packet (which might turn out to be a cancel request
	 * packet).
	 */
	status = ProcessStartupPacket(port, false);

	if (status != STATUS_OK)
		proc_exit(0);

	/*
	 * Now that we have the user and database name, we can set the process
	 * title for ps.  It's good to do this as early as possible in startup.
	 */
	init_ps_display(port->user_name, port->database_name, remote_ps_data,
					update_process_title ? "authentication" : "");

	/*
	 * Now perform authentication exchange.
	 */
	ClientAuthentication(port); /* might not return, if failure */

	/*
	 * Done with authentication.  Disable timeout, and prevent SIGTERM/SIGQUIT
	 * again until backend startup is complete.
	 */
	if (!disable_sig_alarm(false))
		elog(FATAL, "could not disable timer for authorization timeout");
	PG_SETMASK(&BlockSig);

	if (Log_connections)
		ereport(LOG,
				(errmsg("connection authorized: user=%s database=%s",
						port->user_name, port->database_name)));
}


/*
 * BackendRun -- set up the backend's argument list and invoke PostgresMain()
 *
 * returns:
 *		Shouldn't return at all.
 *		If PostgresMain() fails, return status.
 */
static int
BackendRun(Port *port)
{
	char	  **av;
	int			maxac;
	int			ac;
	long		secs;
	int			usecs;
	char		protobuf[32];
	int			i;

	/*
	 * Don't want backend to be able to see the postmaster random number
	 * generator state.  We have to clobber the static random_seed *and* start
	 * a new random sequence in the random() library function.
	 */
	random_seed = 0;
	random_start_time.tv_usec = 0;
	/* slightly hacky way to get integer microseconds part of timestamptz */
	TimestampDifference(0, port->SessionStartTime, &secs, &usecs);
	srandom((unsigned int) (MyProcPid ^ usecs));

	/* ----------------
	 * Now, build the argv vector that will be given to PostgresMain.
	 *
	 * The layout of the command line is
	 *		postgres [secure switches] -y databasename [insecure switches]
	 * where the switches after -y come from the client request.
	 *
	 * The maximum possible number of commandline arguments that could come
	 * from ExtraOptions or port->cmdline_options is (strlen + 1) / 2; see
	 * split_opts().
	 * ----------------
	 */
	maxac = 10;					/* for fixed args supplied below */
	maxac += (strlen(ExtraOptions) + 1) / 2;
	if (port->cmdline_options)
		maxac += (strlen(port->cmdline_options) + 1) / 2;

	av = (char **) MemoryContextAlloc(TopMemoryContext,
									  maxac * sizeof(char *));
	ac = 0;

	av[ac++] = "postgres";

	/*
	 * Pass any backend switches specified with -o in the postmaster's own
	 * command line.  We assume these are secure.  (It's OK to mangle
	 * ExtraOptions now, since we're safely inside a subprocess.)
	 */
	split_opts(av, &ac, ExtraOptions);

	/* Tell the backend what protocol the frontend is using. */
	snprintf(protobuf, sizeof(protobuf), "-v%u", port->proto);
	av[ac++] = protobuf;

	/*
	 * Tell the backend it is being called from the postmaster, and which
	 * database to use.  -y marks the end of secure switches.
	 */
	av[ac++] = "-y";
	av[ac++] = port->database_name;

	/*
	 * Pass the (insecure) option switches from the connection request. (It's
	 * OK to mangle port->cmdline_options now.)
	 */
	if (port->cmdline_options)
		split_opts(av, &ac, port->cmdline_options);

	av[ac] = NULL;

	Assert(ac < maxac);

	/*
	 * Release postmaster's working memory context so that backend can recycle
	 * the space.  Note this does not trash *MyProcPort, because ConnCreate()
	 * allocated that space with malloc() ... else we'd need to copy the Port
	 * data here.  Also, subsidiary data such as the username isn't lost
	 * either; see ProcessStartupPacket().
	 */
	MemoryContextSwitchTo(TopMemoryContext);
	MemoryContextDelete(PostmasterContext);
	PostmasterContext = NULL;

	/*
	 * Debug: print arguments being passed to backend
	 */
	ereport(DEBUG3,
			(errmsg_internal("%s child[%d]: starting with (",
							 progname, (int) getpid())));
	for (i = 0; i < ac; ++i)
		ereport(DEBUG3,
				(errmsg_internal("\t%s", av[i])));
	ereport(DEBUG3,
			(errmsg_internal(")")));

	ClientAuthInProgress = false;		/* client_min_messages is active now */

	return (PostgresMain(ac, av, port->user_name));
}


#ifdef EXEC_BACKEND

/*
 * postmaster_forkexec -- fork and exec a postmaster subprocess
 *
 * The caller must have set up the argv array already, except for argv[2]
 * which will be filled with the name of the temp variable file.
 *
 * Returns the child process PID, or -1 on fork failure (a suitable error
 * message has been logged on failure).
 *
 * All uses of this routine will dispatch to SubPostmasterMain in the
 * child process.
 */
pid_t
postmaster_forkexec(int argc, char *argv[])
{
	Port		port;

	/* This entry point passes dummy values for the Port variables */
	memset(&port, 0, sizeof(port));
	return internal_forkexec(argc, argv, &port);
}

/*
 * backend_forkexec -- fork/exec off a backend process
 *
 * Some operating systems (WIN32) don't have fork() so we have to simulate
 * it by storing parameters that need to be passed to the child and
 * then create a new child process.
 *
 * returns the pid of the fork/exec'd process, or -1 on failure
 */
static pid_t
backend_forkexec(Port *port)
{
	char	   *av[4];
	int			ac = 0;

	av[ac++] = "postgres";
	av[ac++] = "--forkbackend";
	av[ac++] = NULL;			/* filled in by internal_forkexec */

	av[ac] = NULL;
	Assert(ac < lengthof(av));

	return internal_forkexec(ac, av, port);
}

#ifndef WIN32

/*
 * internal_forkexec non-win32 implementation
 *
 * - writes out backend variables to the parameter file
 * - fork():s, and then exec():s the child process
 */
static pid_t
internal_forkexec(int argc, char *argv[], Port *port)
{
	static unsigned long tmpBackendFileNum = 0;
	pid_t		pid;
	char		tmpfilename[MAXPGPATH];
	BackendParameters param;
	FILE	   *fp;

	if (!save_backend_variables(&param, port))
		return -1;				/* log made by save_backend_variables */

	/* Calculate name for temp file */
	snprintf(tmpfilename, MAXPGPATH, "%s/%s.backend_var.%d.%lu",
			 PG_TEMP_FILES_DIR, PG_TEMP_FILE_PREFIX,
			 MyProcPid, ++tmpBackendFileNum);

	/* Open file */
	fp = AllocateFile(tmpfilename, PG_BINARY_W);
	if (!fp)
	{
		/* As in OpenTemporaryFile, try to make the temp-file directory */
		mkdir(PG_TEMP_FILES_DIR, S_IRWXU);

		fp = AllocateFile(tmpfilename, PG_BINARY_W);
		if (!fp)
		{
			ereport(LOG,
					(errcode_for_file_access(),
					 errmsg("could not create file \"%s\": %m",
							tmpfilename)));
			return -1;
		}
	}

	if (fwrite(&param, sizeof(param), 1, fp) != 1)
	{
		ereport(LOG,
				(errcode_for_file_access(),
				 errmsg("could not write to file \"%s\": %m", tmpfilename)));
		FreeFile(fp);
		return -1;
	}

	/* Release file */
	if (FreeFile(fp))
	{
		ereport(LOG,
				(errcode_for_file_access(),
				 errmsg("could not write to file \"%s\": %m", tmpfilename)));
		return -1;
	}

	/* Make sure caller set up argv properly */
	Assert(argc >= 3);
	Assert(argv[argc] == NULL);
	Assert(strncmp(argv[1], "--fork", 6) == 0);
	Assert(argv[2] == NULL);

	/* Insert temp file name after --fork argument */
	argv[2] = tmpfilename;

	/* Fire off execv in child */
	if ((pid = fork_process()) == 0)
	{
		if (execv(postgres_exec_path, argv) < 0)
		{
			ereport(LOG,
					(errmsg("could not execute server process \"%s\": %m",
							postgres_exec_path)));
			/* We're already in the child process here, can't return */
			exit(1);
		}
	}

	return pid;					/* Parent returns pid, or -1 on fork failure */
}
#else							/* WIN32 */

/*
 * internal_forkexec win32 implementation
 *
 * - starts backend using CreateProcess(), in suspended state
 * - writes out backend variables to the parameter file
 *	- during this, duplicates handles and sockets required for
 *	  inheritance into the new process
 * - resumes execution of the new process once the backend parameter
 *	 file is complete.
 */
static pid_t
internal_forkexec(int argc, char *argv[], Port *port)
{
	STARTUPINFO si;
	PROCESS_INFORMATION pi;
	int			i;
	int			j;
	char		cmdLine[MAXPGPATH * 2];
	HANDLE		paramHandle;
	BackendParameters *param;
	SECURITY_ATTRIBUTES sa;
	char		paramHandleStr[32];
	win32_deadchild_waitinfo *childinfo;

	/* Make sure caller set up argv properly */
	Assert(argc >= 3);
	Assert(argv[argc] == NULL);
	Assert(strncmp(argv[1], "--fork", 6) == 0);
	Assert(argv[2] == NULL);

	/* Set up shared memory for parameter passing */
	ZeroMemory(&sa, sizeof(sa));
	sa.nLength = sizeof(sa);
	sa.bInheritHandle = TRUE;
	paramHandle = CreateFileMapping(INVALID_HANDLE_VALUE,
									&sa,
									PAGE_READWRITE,
									0,
									sizeof(BackendParameters),
									NULL);
	if (paramHandle == INVALID_HANDLE_VALUE)
	{
		elog(LOG, "could not create backend parameter file mapping: error code %d",
			 (int) GetLastError());
		return -1;
	}

	param = MapViewOfFile(paramHandle, FILE_MAP_WRITE, 0, 0, sizeof(BackendParameters));
	if (!param)
	{
		elog(LOG, "could not map backend parameter memory: error code %d",
			 (int) GetLastError());
		CloseHandle(paramHandle);
		return -1;
	}

	/* Insert temp file name after --fork argument */
	sprintf(paramHandleStr, "%lu", (DWORD) paramHandle);
	argv[2] = paramHandleStr;

	/* Format the cmd line */
	cmdLine[sizeof(cmdLine) - 1] = '\0';
	cmdLine[sizeof(cmdLine) - 2] = '\0';
	snprintf(cmdLine, sizeof(cmdLine) - 1, "\"%s\"", postgres_exec_path);
	i = 0;
	while (argv[++i] != NULL)
	{
		j = strlen(cmdLine);
		snprintf(cmdLine + j, sizeof(cmdLine) - 1 - j, " \"%s\"", argv[i]);
	}
	if (cmdLine[sizeof(cmdLine) - 2] != '\0')
	{
		elog(LOG, "subprocess command line too long");
		return -1;
	}

	memset(&pi, 0, sizeof(pi));
	memset(&si, 0, sizeof(si));
	si.cb = sizeof(si);

	/*
	 * Create the subprocess in a suspended state. This will be resumed later,
	 * once we have written out the parameter file.
	 */
	if (!CreateProcess(NULL, cmdLine, NULL, NULL, TRUE, CREATE_SUSPENDED,
					   NULL, NULL, &si, &pi))
	{
		elog(LOG, "CreateProcess call failed: %m (error code %d)",
			 (int) GetLastError());
		return -1;
	}

	if (!save_backend_variables(param, port, pi.hProcess, pi.dwProcessId))
	{
		/*
		 * log made by save_backend_variables, but we have to clean up the
		 * mess with the half-started process
		 */
		if (!TerminateProcess(pi.hProcess, 255))
			ereport(ERROR,
					(errmsg_internal("could not terminate unstarted process: error code %d",
									 (int) GetLastError())));
		CloseHandle(pi.hProcess);
		CloseHandle(pi.hThread);
		return -1;				/* log made by save_backend_variables */
	}

	/* Drop the shared memory that is now inherited to the backend */
	if (!UnmapViewOfFile(param))
		elog(LOG, "could not unmap view of backend parameter file: error code %d",
			 (int) GetLastError());
	if (!CloseHandle(paramHandle))
		elog(LOG, "could not close handle to backend parameter file: error code %d",
			 (int) GetLastError());

	/*
	 * Now that the backend variables are written out, we start the child
	 * thread so it can start initializing while we set up the rest of the
	 * parent state.
	 */
	if (ResumeThread(pi.hThread) == -1)
	{
		if (!TerminateProcess(pi.hProcess, 255))
		{
			ereport(ERROR,
					(errmsg_internal("could not terminate unstartable process: error code %d",
									 (int) GetLastError())));
			CloseHandle(pi.hProcess);
			CloseHandle(pi.hThread);
			return -1;
		}
		CloseHandle(pi.hProcess);
		CloseHandle(pi.hThread);
		ereport(ERROR,
				(errmsg_internal("could not resume thread of unstarted process: error code %d",
								 (int) GetLastError())));
		return -1;
	}

	/*
	 * Queue a waiter for to signal when this child dies. The wait will be
	 * handled automatically by an operating system thread pool.
	 *
	 * Note: use malloc instead of palloc, since it needs to be thread-safe.
	 * Struct will be free():d from the callback function that runs on a
	 * different thread.
	 */
	childinfo = malloc(sizeof(win32_deadchild_waitinfo));
	if (!childinfo)
		ereport(FATAL,
				(errcode(ERRCODE_OUT_OF_MEMORY),
				 errmsg("out of memory")));

	childinfo->procHandle = pi.hProcess;
	childinfo->procId = pi.dwProcessId;

	if (!RegisterWaitForSingleObject(&childinfo->waitHandle,
									 pi.hProcess,
									 pgwin32_deadchild_callback,
									 childinfo,
									 INFINITE,
								WT_EXECUTEONLYONCE | WT_EXECUTEINWAITTHREAD))
		ereport(FATAL,
		(errmsg_internal("could not register process for wait: error code %d",
						 (int) GetLastError())));

	/* Don't close pi.hProcess here - the wait thread needs access to it */

	CloseHandle(pi.hThread);

	return pi.dwProcessId;
}
#endif   /* WIN32 */


/*
 * SubPostmasterMain -- Get the fork/exec'd process into a state equivalent
 *			to what it would be if we'd simply forked on Unix, and then
 *			dispatch to the appropriate place.
 *
 * The first two command line arguments are expected to be "--forkFOO"
 * (where FOO indicates which postmaster child we are to become), and
 * the name of a variables file that we can read to load data that would
 * have been inherited by fork() on Unix.  Remaining arguments go to the
 * subprocess FooMain() routine.
 */
int
SubPostmasterMain(int argc, char *argv[])
{
	Port		port;

	/* Do this sooner rather than later... */
	IsUnderPostmaster = true;	/* we are a postmaster subprocess now */

	MyProcPid = getpid();		/* reset MyProcPid */

	MyStartTime = time(NULL);

	/*
	 * make sure stderr is in binary mode before anything can possibly be
	 * written to it, in case it's actually the syslogger pipe, so the pipe
	 * chunking protocol isn't disturbed. Non-logpipe data gets translated on
	 * redirection (e.g. via pg_ctl -l) anyway.
	 */
#ifdef WIN32
	_setmode(fileno(stderr), _O_BINARY);
#endif

	/* Lose the postmaster's on-exit routines (really a no-op) */
	on_exit_reset();

	/* In EXEC_BACKEND case we will not have inherited these settings */
	IsPostmasterEnvironment = true;
	whereToSendOutput = DestNone;

	/* Setup essential subsystems (to ensure elog() behaves sanely) */
	MemoryContextInit();
	InitializeGUCOptions();

	/* Read in the variables file */
	memset(&port, 0, sizeof(Port));
	read_backend_variables(argv[2], &port);

	/*
	 * Set up memory area for GSS information. Mirrors the code in ConnCreate
	 * for the non-exec case.
	 */
#if defined(ENABLE_GSS) || defined(ENABLE_SSPI)
	port.gss = (pg_gssinfo *) calloc(1, sizeof(pg_gssinfo));
	if (!port.gss)
		ereport(FATAL,
				(errcode(ERRCODE_OUT_OF_MEMORY),
				 errmsg("out of memory")));
#endif


	/* Check we got appropriate args */
	if (argc < 3)
		elog(FATAL, "invalid subpostmaster invocation");

	/*
	 * If appropriate, physically re-attach to shared memory segment. We want
	 * to do this before going any further to ensure that we can attach at the
	 * same address the postmaster used.
	 */
	if (strcmp(argv[1], "--forkbackend") == 0 ||
		strcmp(argv[1], "--forkavlauncher") == 0 ||
		strcmp(argv[1], "--forkavworker") == 0 ||
		strcmp(argv[1], "--forkboot") == 0)
		PGSharedMemoryReAttach();

	/* autovacuum needs this set before calling InitProcess */
	if (strcmp(argv[1], "--forkavlauncher") == 0)
		AutovacuumLauncherIAm();
	if (strcmp(argv[1], "--forkavworker") == 0)
		AutovacuumWorkerIAm();

	/*
	 * Start our win32 signal implementation. This has to be done after we
	 * read the backend variables, because we need to pick up the signal pipe
	 * from the parent process.
	 */
#ifdef WIN32
	pgwin32_signal_initialize();
#endif

	/* In EXEC_BACKEND case we will not have inherited these settings */
	pqinitmask();
	PG_SETMASK(&BlockSig);

	/* Read in remaining GUC variables */
	read_nondefault_variables();

	/* Run backend or appropriate child */
	if (strcmp(argv[1], "--forkbackend") == 0)
	{
		Assert(argc == 3);		/* shouldn't be any more args */

		/* Close the postmaster's sockets */
		ClosePostmasterPorts(false);

		/*
		 * Need to reinitialize the SSL library in the backend, since the
		 * context structures contain function pointers and cannot be passed
		 * through the parameter file.
		 */
#ifdef USE_SSL
		if (EnableSSL)
			secure_initialize();
#endif

		/*
		 * process any libraries that should be preloaded at postmaster start
		 *
		 * NOTE: we have to re-load the shared_preload_libraries here because
		 * this backend is not fork()ed so we can't inherit any shared
		 * libraries / DLL's from our parent (the postmaster).
		 */
		process_shared_preload_libraries();

		/*
		 * Perform additional initialization and client authentication.
		 *
		 * We want to do this before InitProcess() for a couple of reasons: 1.
		 * so that we aren't eating up a PGPROC slot while waiting on the
		 * client. 2. so that if InitProcess() fails due to being out of
		 * PGPROC slots, we have already initialized libpq and are able to
		 * report the error to the client.
		 */
		BackendInitialize(&port);

		/* Restore basic shared memory pointers */
		InitShmemAccess(UsedShmemSegAddr);

		/* Need a PGPROC to run CreateSharedMemoryAndSemaphores */
		InitProcess();

		/*
		 * Attach process to shared data structures.  If testing EXEC_BACKEND
		 * on Linux, you must run this as root before starting the postmaster:
		 *
		 * echo 0 >/proc/sys/kernel/randomize_va_space
		 *
		 * This prevents a randomized stack base address that causes child
		 * shared memory to be at a different address than the parent, making
		 * it impossible to attached to shared memory.	Return the value to
		 * '1' when finished.
		 */
		CreateSharedMemoryAndSemaphores(false, 0);

		/* And run the backend */
		proc_exit(BackendRun(&port));
	}
	if (strcmp(argv[1], "--forkboot") == 0)
	{
		/* Close the postmaster's sockets */
		ClosePostmasterPorts(false);

		/* Restore basic shared memory pointers */
		InitShmemAccess(UsedShmemSegAddr);

		/* Need a PGPROC to run CreateSharedMemoryAndSemaphores */
		InitAuxiliaryProcess();

		/* Attach process to shared data structures */
		CreateSharedMemoryAndSemaphores(false, 0);

		AuxiliaryProcessMain(argc - 2, argv + 2);
		proc_exit(0);
	}
	if (strcmp(argv[1], "--forkavlauncher") == 0)
	{
		/* Close the postmaster's sockets */
		ClosePostmasterPorts(false);

		/* Restore basic shared memory pointers */
		InitShmemAccess(UsedShmemSegAddr);

		/* Need a PGPROC to run CreateSharedMemoryAndSemaphores */
		InitAuxiliaryProcess();

		/* Attach process to shared data structures */
		CreateSharedMemoryAndSemaphores(false, 0);

		AutoVacLauncherMain(argc - 2, argv + 2);
		proc_exit(0);
	}
	if (strcmp(argv[1], "--forkavworker") == 0)
	{
		/* Close the postmaster's sockets */
		ClosePostmasterPorts(false);

		/* Restore basic shared memory pointers */
		InitShmemAccess(UsedShmemSegAddr);

		/* Need a PGPROC to run CreateSharedMemoryAndSemaphores */
		InitProcess();

		/* Attach process to shared data structures */
		CreateSharedMemoryAndSemaphores(false, 0);

		AutoVacWorkerMain(argc - 2, argv + 2);
		proc_exit(0);
	}
	if (strcmp(argv[1], "--forkarch") == 0)
	{
		/* Close the postmaster's sockets */
		ClosePostmasterPorts(false);

		/* Do not want to attach to shared memory */

		PgArchiverMain(argc, argv);
		proc_exit(0);
	}
	if (strcmp(argv[1], "--forkcol") == 0)
	{
		/* Close the postmaster's sockets */
		ClosePostmasterPorts(false);

		/* Do not want to attach to shared memory */

		PgstatCollectorMain(argc, argv);
		proc_exit(0);
	}
	if (strcmp(argv[1], "--forklog") == 0)
	{
		/* Close the postmaster's sockets */
		ClosePostmasterPorts(true);

		/* Do not want to attach to shared memory */

		SysLoggerMain(argc, argv);
		proc_exit(0);
	}

	return 1;					/* shouldn't get here */
}
#endif   /* EXEC_BACKEND */


/*
 * ExitPostmaster -- cleanup
 *
 * Do NOT call exit() directly --- always go through here!
 */
static void
ExitPostmaster(int status)
{
	/* should cleanup shared memory and kill all backends */

	/*
	 * Not sure of the semantics here.	When the Postmaster dies, should the
	 * backends all be killed? probably not.
	 *
	 * MUST		-- vadim 05-10-1999
	 */

	proc_exit(status);
}

/*
 * sigusr1_handler - handle signal conditions from child processes
 */
static void
sigusr1_handler(SIGNAL_ARGS)
{
	int			save_errno = errno;

	PG_SETMASK(&BlockSig);

	if (CheckPostmasterSignal(PMSIGNAL_PASSWORD_CHANGE))
	{
		/*
		 * Authorization file has changed.
		 */
		load_role();
	}

	if (CheckPostmasterSignal(PMSIGNAL_WAKEN_ARCHIVER) &&
		PgArchPID != 0)
	{
		/*
		 * Send SIGUSR1 to archiver process, to wake it up and begin archiving
		 * next transaction log file.
		 */
		signal_child(PgArchPID, SIGUSR1);
	}

	if (CheckPostmasterSignal(PMSIGNAL_ROTATE_LOGFILE) &&
		SysLoggerPID != 0)
	{
		/* Tell syslogger to rotate logfile */
		signal_child(SysLoggerPID, SIGUSR1);
	}

	if (CheckPostmasterSignal(PMSIGNAL_START_AUTOVAC_LAUNCHER))
	{
		/*
		 * Start one iteration of the autovacuum daemon, even if autovacuuming
		 * is nominally not enabled.  This is so we can have an active defense
		 * against transaction ID wraparound.  We set a flag for the main loop
		 * to do it rather than trying to do it here --- this is because the
		 * autovac process itself may send the signal, and we want to handle
		 * that by launching another iteration as soon as the current one
		 * completes.
		 */
		start_autovac_launcher = true;
	}

	if (CheckPostmasterSignal(PMSIGNAL_START_AUTOVAC_WORKER))
	{
		/* The autovacuum launcher wants us to start a worker process. */
		StartAutovacuumWorker();
	}

	PG_SETMASK(&UnBlockSig);

	errno = save_errno;
}


/*
 * Dummy signal handler
 *
 * We use this for signals that we don't actually use in the postmaster,
 * but we do use in backends.  If we were to SIG_IGN such signals in the
 * postmaster, then a newly started backend might drop a signal that arrives
 * before it's able to reconfigure its signal processing.  (See notes in
 * tcop/postgres.c.)
 */
static void
dummy_handler(SIGNAL_ARGS)
{
}

/*
 * RandomSalt
 */
static void
RandomSalt(char *md5Salt)
{
	long		rand;

	/*
	 * We use % 255, sacrificing one possible byte value, so as to ensure that
	 * all bits of the random() value participate in the result. While at it,
	 * add one to avoid generating any null bytes.
	 */
	rand = PostmasterRandom();
	md5Salt[0] = (rand % 255) + 1;
	rand = PostmasterRandom();
	md5Salt[1] = (rand % 255) + 1;
	rand = PostmasterRandom();
	md5Salt[2] = (rand % 255) + 1;
	rand = PostmasterRandom();
	md5Salt[3] = (rand % 255) + 1;
}

/*
 * PostmasterRandom
 */
static long
PostmasterRandom(void)
{
	/*
	 * Select a random seed at the time of first receiving a request.
	 */
	if (random_seed == 0)
	{
		do
		{
			struct timeval random_stop_time;

			gettimeofday(&random_stop_time, NULL);

			/*
			 * We are not sure how much precision is in tv_usec, so we swap
			 * the high and low 16 bits of 'random_stop_time' and XOR them
			 * with 'random_start_time'. On the off chance that the result is
			 * 0, we loop until it isn't.
			 */
			random_seed = random_start_time.tv_usec ^
				((random_stop_time.tv_usec << 16) |
				 ((random_stop_time.tv_usec >> 16) & 0xffff));
		}
		while (random_seed == 0);

		srandom(random_seed);
	}

	return random();
}

/*
 * Count up number of child processes (excluding special children and
 * dead_end children)
 */
static int
CountChildren(void)
{
	Dlelem	   *curr;
	int			cnt = 0;

	for (curr = DLGetHead(BackendList); curr; curr = DLGetSucc(curr))
	{
		Backend    *bp = (Backend *) DLE_VAL(curr);

		if (!bp->dead_end)
			cnt++;
	}
	return cnt;
}


/*
 * StartChildProcess -- start an auxiliary process for the postmaster
 *
 * xlop determines what kind of child will be started.	All child types
 * initially go to AuxiliaryProcessMain, which will handle common setup.
 *
 * Return value of StartChildProcess is subprocess' PID, or 0 if failed
 * to start subprocess.
 */
static pid_t
StartChildProcess(AuxProcType type)
{
	pid_t		pid;
	char	   *av[10];
	int			ac = 0;
	char		typebuf[32];

	/*
	 * Set up command-line arguments for subprocess
	 */
	av[ac++] = "postgres";

#ifdef EXEC_BACKEND
	av[ac++] = "--forkboot";
	av[ac++] = NULL;			/* filled in by postmaster_forkexec */
#endif

	snprintf(typebuf, sizeof(typebuf), "-x%d", type);
	av[ac++] = typebuf;

	av[ac] = NULL;
	Assert(ac < lengthof(av));

#ifdef EXEC_BACKEND
	pid = postmaster_forkexec(ac, av);
#else							/* !EXEC_BACKEND */
	pid = fork_process();

	if (pid == 0)				/* child */
	{
		IsUnderPostmaster = true;		/* we are a postmaster subprocess now */

		/* Close the postmaster's sockets */
		ClosePostmasterPorts(false);

		/* Lose the postmaster's on-exit routines and port connections */
		on_exit_reset();

		/* Release postmaster's working memory context */
		MemoryContextSwitchTo(TopMemoryContext);
		MemoryContextDelete(PostmasterContext);
		PostmasterContext = NULL;

		AuxiliaryProcessMain(ac, av);
		ExitPostmaster(0);
	}
#endif   /* EXEC_BACKEND */

	if (pid < 0)
	{
		/* in parent, fork failed */
		int			save_errno = errno;

		errno = save_errno;
		switch (type)
		{
			case StartupProcess:
				ereport(LOG,
						(errmsg("could not fork startup process: %m")));
				break;
			case BgWriterProcess:
				ereport(LOG,
				   (errmsg("could not fork background writer process: %m")));
				break;
			case WalWriterProcess:
				ereport(LOG,
						(errmsg("could not fork WAL writer process: %m")));
				break;
			default:
				ereport(LOG,
						(errmsg("could not fork process: %m")));
				break;
		}

		/*
		 * fork failure is fatal during startup, but there's no need to choke
		 * immediately if starting other child types fails.
		 */
		if (type == StartupProcess)
			ExitPostmaster(1);
		return 0;
	}

	/*
	 * in parent, successful fork
	 */
	return pid;
}

/*
 * StartAutovacuumWorker
 *		Start an autovac worker process.
 *
 * This function is here because it enters the resulting PID into the
 * postmaster's private backends list.
 *
 * NB -- this code very roughly matches BackendStartup.
 */
static void
StartAutovacuumWorker(void)
{
	Backend    *bn;

	/*
	 * If not in condition to run a process, don't try, but handle it like a
	 * fork failure.  This does not normally happen, since the signal is only
	 * supposed to be sent by autovacuum launcher when it's OK to do it, but
	 * we have to check to avoid race-condition problems during DB state
	 * changes.
	 */
	if (canAcceptConnections() == CAC_OK)
	{
		/*
		 * Compute the cancel key that will be assigned to this session. We
		 * probably don't need cancel keys for autovac workers, but we'd
		 * better have something random in the field to prevent unfriendly
		 * people from sending cancels to them.
		 */
		MyCancelKey = PostmasterRandom();

		bn = (Backend *) malloc(sizeof(Backend));
		if (bn)
		{
			bn->pid = StartAutoVacWorker();
			if (bn->pid > 0)
			{
				bn->cancel_key = MyCancelKey;
				bn->is_autovacuum = true;
				bn->dead_end = false;
				DLAddHead(BackendList, DLNewElem(bn));
#ifdef EXEC_BACKEND
				ShmemBackendArrayAdd(bn);
#endif
				/* all OK */
				return;
			}

			/*
			 * fork failed, fall through to report -- actual error message was
			 * logged by StartAutoVacWorker
			 */
			free(bn);
		}
		else
			ereport(LOG,
					(errcode(ERRCODE_OUT_OF_MEMORY),
					 errmsg("out of memory")));
	}

	/*
	 * Report the failure to the launcher, if it's running.  (If it's not, we
	 * might not even be connected to shared memory, so don't try to call
	 * AutoVacWorkerFailed.)
	 */
	if (AutoVacPID != 0)
	{
		AutoVacWorkerFailed();
		kill(AutoVacPID, SIGUSR1);
	}
}

/*
 * Create the opts file
 */
static bool
CreateOptsFile(int argc, char *argv[], char *fullprogname)
{
	FILE	   *fp;
	int			i;

#define OPTS_FILE	"postmaster.opts"

	if ((fp = fopen(OPTS_FILE, "w")) == NULL)
	{
		elog(LOG, "could not create file \"%s\": %m", OPTS_FILE);
		return false;
	}

	fprintf(fp, "%s", fullprogname);
	for (i = 1; i < argc; i++)
		fprintf(fp, " \"%s\"", argv[i]);
	fputs("\n", fp);

	if (fclose(fp))
	{
		elog(LOG, "could not write file \"%s\": %m", OPTS_FILE);
		return false;
	}

	return true;
}


#ifdef EXEC_BACKEND

/*
 * The following need to be available to the save/restore_backend_variables
 * functions
 */
extern slock_t *ShmemLock;
extern LWLock *LWLockArray;
extern slock_t *ProcStructLock;
extern PROC_HDR *ProcGlobal;
extern PGPROC *AuxiliaryProcs;
extern int	pgStatSock;

#ifndef WIN32
#define write_inheritable_socket(dest, src, childpid) (*(dest) = (src))
#define read_inheritable_socket(dest, src) (*(dest) = *(src))
#else
static void write_duplicated_handle(HANDLE * dest, HANDLE src, HANDLE child);
static void write_inheritable_socket(InheritableSocket * dest, SOCKET src,
						 pid_t childPid);
static void read_inheritable_socket(SOCKET * dest, InheritableSocket * src);
#endif


/* Save critical backend variables into the BackendParameters struct */
#ifndef WIN32
static bool
save_backend_variables(BackendParameters * param, Port *port)
#else
static bool
save_backend_variables(BackendParameters * param, Port *port,
					   HANDLE childProcess, pid_t childPid)
#endif
{
	memcpy(&param->port, port, sizeof(Port));
	write_inheritable_socket(&param->portsocket, port->sock, childPid);

	strlcpy(param->DataDir, DataDir, MAXPGPATH);

	memcpy(&param->ListenSocket, &ListenSocket, sizeof(ListenSocket));

	param->MyCancelKey = MyCancelKey;

	param->UsedShmemSegID = UsedShmemSegID;
	param->UsedShmemSegAddr = UsedShmemSegAddr;

	param->ShmemLock = ShmemLock;
	param->ShmemVariableCache = ShmemVariableCache;
	param->ShmemBackendArray = ShmemBackendArray;

	param->LWLockArray = LWLockArray;
	param->ProcStructLock = ProcStructLock;
	param->ProcGlobal = ProcGlobal;
	param->AuxiliaryProcs = AuxiliaryProcs;
	write_inheritable_socket(&param->pgStatSock, pgStatSock, childPid);

	param->PostmasterPid = PostmasterPid;
	param->PgStartTime = PgStartTime;
	param->PgReloadTime = PgReloadTime;

	param->redirection_done = redirection_done;

#ifdef WIN32
	param->PostmasterHandle = PostmasterHandle;
	write_duplicated_handle(&param->initial_signal_pipe,
							pgwin32_create_signal_listener(childPid),
							childProcess);
#endif

	memcpy(&param->syslogPipe, &syslogPipe, sizeof(syslogPipe));

	strlcpy(param->my_exec_path, my_exec_path, MAXPGPATH);

	strlcpy(param->pkglib_path, pkglib_path, MAXPGPATH);

	strlcpy(param->ExtraOptions, ExtraOptions, MAXPGPATH);

	strlcpy(param->lc_collate, setlocale(LC_COLLATE, NULL), NAMEDATALEN);
	strlcpy(param->lc_ctype, setlocale(LC_CTYPE, NULL), NAMEDATALEN);

	return true;
}


#ifdef WIN32
/*
 * Duplicate a handle for usage in a child process, and write the child
 * process instance of the handle to the parameter file.
 */
static void
write_duplicated_handle(HANDLE * dest, HANDLE src, HANDLE childProcess)
{
	HANDLE		hChild = INVALID_HANDLE_VALUE;

	if (!DuplicateHandle(GetCurrentProcess(),
						 src,
						 childProcess,
						 &hChild,
						 0,
						 TRUE,
						 DUPLICATE_CLOSE_SOURCE | DUPLICATE_SAME_ACCESS))
		ereport(ERROR,
				(errmsg_internal("could not duplicate handle to be written to backend parameter file: error code %d",
								 (int) GetLastError())));

	*dest = hChild;
}

/*
 * Duplicate a socket for usage in a child process, and write the resulting
 * structure to the parameter file.
 * This is required because a number of LSPs (Layered Service Providers) very
 * common on Windows (antivirus, firewalls, download managers etc) break
 * straight socket inheritance.
 */
static void
write_inheritable_socket(InheritableSocket * dest, SOCKET src, pid_t childpid)
{
	dest->origsocket = src;
	if (src != 0 && src != -1)
	{
		/* Actual socket */
		if (WSADuplicateSocket(src, childpid, &dest->wsainfo) != 0)
			ereport(ERROR,
					(errmsg("could not duplicate socket %d for use in backend: error code %d",
							src, WSAGetLastError())));
	}
}

/*
 * Read a duplicate socket structure back, and get the socket descriptor.
 */
static void
read_inheritable_socket(SOCKET * dest, InheritableSocket * src)
{
	SOCKET		s;

	if (src->origsocket == -1 || src->origsocket == 0)
	{
		/* Not a real socket! */
		*dest = src->origsocket;
	}
	else
	{
		/* Actual socket, so create from structure */
		s = WSASocket(FROM_PROTOCOL_INFO,
					  FROM_PROTOCOL_INFO,
					  FROM_PROTOCOL_INFO,
					  &src->wsainfo,
					  0,
					  0);
		if (s == INVALID_SOCKET)
		{
			write_stderr("could not create inherited socket: error code %d\n",
						 WSAGetLastError());
			exit(1);
		}
		*dest = s;

		/*
		 * To make sure we don't get two references to the same socket, close
		 * the original one. (This would happen when inheritance actually
		 * works..
		 */
		closesocket(src->origsocket);
	}
}
#endif

static void
read_backend_variables(char *id, Port *port)
{
	BackendParameters param;

#ifndef WIN32
	/* Non-win32 implementation reads from file */
	FILE	   *fp;

	/* Open file */
	fp = AllocateFile(id, PG_BINARY_R);
	if (!fp)
	{
		write_stderr("could not read from backend variables file \"%s\": %s\n",
					 id, strerror(errno));
		exit(1);
	}

	if (fread(&param, sizeof(param), 1, fp) != 1)
	{
		write_stderr("could not read from backend variables file \"%s\": %s\n",
					 id, strerror(errno));
		exit(1);
	}

	/* Release file */
	FreeFile(fp);
	if (unlink(id) != 0)
	{
		write_stderr("could not remove file \"%s\": %s\n",
					 id, strerror(errno));
		exit(1);
	}
#else
	/* Win32 version uses mapped file */
	HANDLE		paramHandle;
	BackendParameters *paramp;

	paramHandle = (HANDLE) atol(id);
	paramp = MapViewOfFile(paramHandle, FILE_MAP_READ, 0, 0, 0);
	if (!paramp)
	{
		write_stderr("could not map view of backend variables: error code %d\n",
					 (int) GetLastError());
		exit(1);
	}

	memcpy(&param, paramp, sizeof(BackendParameters));

	if (!UnmapViewOfFile(paramp))
	{
		write_stderr("could not unmap view of backend variables: error code %d\n",
					 (int) GetLastError());
		exit(1);
	}

	if (!CloseHandle(paramHandle))
	{
		write_stderr("could not close handle to backend parameter variables: error code %d\n",
					 (int) GetLastError());
		exit(1);
	}
#endif

	restore_backend_variables(&param, port);
}

/* Restore critical backend variables from the BackendParameters struct */
static void
restore_backend_variables(BackendParameters * param, Port *port)
{
	memcpy(port, &param->port, sizeof(Port));
	read_inheritable_socket(&port->sock, &param->portsocket);

	SetDataDir(param->DataDir);

	memcpy(&ListenSocket, &param->ListenSocket, sizeof(ListenSocket));

	MyCancelKey = param->MyCancelKey;

	UsedShmemSegID = param->UsedShmemSegID;
	UsedShmemSegAddr = param->UsedShmemSegAddr;

	ShmemLock = param->ShmemLock;
	ShmemVariableCache = param->ShmemVariableCache;
	ShmemBackendArray = param->ShmemBackendArray;

	LWLockArray = param->LWLockArray;
	ProcStructLock = param->ProcStructLock;
	ProcGlobal = param->ProcGlobal;
	AuxiliaryProcs = param->AuxiliaryProcs;
	read_inheritable_socket(&pgStatSock, &param->pgStatSock);

	PostmasterPid = param->PostmasterPid;
	PgStartTime = param->PgStartTime;
	PgReloadTime = param->PgReloadTime;

	redirection_done = param->redirection_done;

#ifdef WIN32
	PostmasterHandle = param->PostmasterHandle;
	pgwin32_initial_signal_pipe = param->initial_signal_pipe;
#endif

	memcpy(&syslogPipe, &param->syslogPipe, sizeof(syslogPipe));

	strlcpy(my_exec_path, param->my_exec_path, MAXPGPATH);

	strlcpy(pkglib_path, param->pkglib_path, MAXPGPATH);

	strlcpy(ExtraOptions, param->ExtraOptions, MAXPGPATH);

	setlocale(LC_COLLATE, param->lc_collate);
	setlocale(LC_CTYPE, param->lc_ctype);
}


Size
ShmemBackendArraySize(void)
{
	return mul_size(NUM_BACKENDARRAY_ELEMS, sizeof(Backend));
}

void
ShmemBackendArrayAllocation(void)
{
	Size		size = ShmemBackendArraySize();

	ShmemBackendArray = (Backend *) ShmemAlloc(size);
	/* Mark all slots as empty */
	memset(ShmemBackendArray, 0, size);
}

static void
ShmemBackendArrayAdd(Backend *bn)
{
	int			i;

	/* Find an empty slot */
	for (i = 0; i < NUM_BACKENDARRAY_ELEMS; i++)
	{
		if (ShmemBackendArray[i].pid == 0)
		{
			ShmemBackendArray[i] = *bn;
			return;
		}
	}

	ereport(FATAL,
			(errmsg_internal("no free slots in shmem backend array")));
}

static void
ShmemBackendArrayRemove(pid_t pid)
{
	int			i;

	for (i = 0; i < NUM_BACKENDARRAY_ELEMS; i++)
	{
		if (ShmemBackendArray[i].pid == pid)
		{
			/* Mark the slot as empty */
			ShmemBackendArray[i].pid = 0;
			return;
		}
	}

	ereport(WARNING,
			(errmsg_internal("could not find backend entry with pid %d",
							 (int) pid)));
}
#endif   /* EXEC_BACKEND */


#ifdef WIN32

static pid_t
win32_waitpid(int *exitstatus)
{
	DWORD		dwd;
	ULONG_PTR	key;
	OVERLAPPED *ovl;

	/*
	 * Check if there are any dead children. If there are, return the pid of
	 * the first one that died.
	 */
	if (GetQueuedCompletionStatus(win32ChildQueue, &dwd, &key, &ovl, 0))
	{
		*exitstatus = (int) key;
		return dwd;
	}

	return -1;
}

/*
 * Note! Code below executes on a thread pool! All operations must
 * be thread safe! Note that elog() and friends must *not* be used.
 */
static void WINAPI
pgwin32_deadchild_callback(PVOID lpParameter, BOOLEAN TimerOrWaitFired)
{
	win32_deadchild_waitinfo *childinfo = (win32_deadchild_waitinfo *) lpParameter;
	DWORD		exitcode;

	if (TimerOrWaitFired)
		return;					/* timeout. Should never happen, since we use
								 * INFINITE as timeout value. */

	/*
	 * Remove handle from wait - required even though it's set to wait only
	 * once
	 */
	UnregisterWaitEx(childinfo->waitHandle, NULL);

	if (!GetExitCodeProcess(childinfo->procHandle, &exitcode))
	{
		/*
		 * Should never happen. Inform user and set a fixed exitcode.
		 */
		write_stderr("could not read exit code for process\n");
		exitcode = 255;
	}

	if (!PostQueuedCompletionStatus(win32ChildQueue, childinfo->procId, (ULONG_PTR) exitcode, NULL))
		write_stderr("could not post child completion status\n");

	/*
	 * Handle is per-process, so we close it here instead of in the
	 * originating thread
	 */
	CloseHandle(childinfo->procHandle);

	/*
	 * Free struct that was allocated before the call to
	 * RegisterWaitForSingleObject()
	 */
	free(childinfo);

	/* Queue SIGCHLD signal */
	pg_queue_signal(SIGCHLD);
}

#endif   /* WIN32 */