diff options
Diffstat (limited to 'nova/api/validation/extra_specs/powervm.py')
| -rw-r--r-- | nova/api/validation/extra_specs/powervm.py | 271 |
1 files changed, 0 insertions, 271 deletions
diff --git a/nova/api/validation/extra_specs/powervm.py b/nova/api/validation/extra_specs/powervm.py deleted file mode 100644 index 58ef793777..0000000000 --- a/nova/api/validation/extra_specs/powervm.py +++ /dev/null @@ -1,271 +0,0 @@ -# Copyright 2020 Red Hat, Inc. All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. - -"""Validators for ``powervm`` namespaced extra specs. - -These were all taken from the IBM documentation. - -https://www.ibm.com/support/knowledgecenter/SSXK2N_1.4.4/com.ibm.powervc.standard.help.doc/powervc_pg_flavorsextraspecs_hmc.html -""" - -from nova.api.validation.extra_specs import base - - -# TODO(stephenfin): A lot of these seem to overlap with existing 'hw:' extra -# specs and could be deprecated in favour of those. -EXTRA_SPEC_VALIDATORS = [ - base.ExtraSpecValidator( - name='powervm:min_mem', - description=( - 'Minimum memory (MB). If you do not specify the value, the value ' - 'is defaulted to the value for ``memory_mb``.' - ), - value={ - 'type': int, - 'min': 256, - 'description': 'Integer >=256 divisible by LMB size of the target', - }, - ), - base.ExtraSpecValidator( - name='powervm:max_mem', - description=( - 'Maximum memory (MB). If you do not specify the value, the value ' - 'is defaulted to the value for ``memory_mb``.' - ), - value={ - 'type': int, - 'min': 256, - 'description': 'Integer >=256 divisible by LMB size of the target', - }, - ), - base.ExtraSpecValidator( - name='powervm:min_vcpu', - description=( - 'Minimum virtual processors. Minimum resource that is required ' - 'for LPAR to boot is 1. The maximum value can be equal to the ' - 'value, which is set to vCPUs. If you specify the value of the ' - 'attribute, you must also specify value of powervm:max_vcpu. ' - 'Defaults to value set for vCPUs.' - ), - value={ - 'type': int, - 'min': 1, - }, - ), - base.ExtraSpecValidator( - name='powervm:max_vcpu', - description=( - 'Minimum virtual processors. Minimum resource that is required ' - 'for LPAR to boot is 1. The maximum value can be equal to the ' - 'value, which is set to vCPUs. If you specify the value of the ' - 'attribute, you must also specify value of powervm:max_vcpu. ' - 'Defaults to value set for vCPUs.' - ), - value={ - 'type': int, - 'min': 1, - }, - ), - base.ExtraSpecValidator( - name='powervm:proc_units', - description=( - 'The wanted ``proc_units``. The value for the attribute cannot be ' - 'less than 1/10 of the value that is specified for Virtual ' - 'CPUs (vCPUs) for hosts with firmware level 7.5 or earlier and ' - '1/20 of the value that is specified for vCPUs for hosts with ' - 'firmware level 7.6 or later. If the value is not specified ' - 'during deployment, it is defaulted to vCPUs * 0.5.' - ), - value={ - 'type': str, - 'pattern': r'\d+\.\d+', - 'description': ( - 'Float (divisible by 0.1 for hosts with firmware level 7.5 or ' - 'earlier and 0.05 for hosts with firmware level 7.6 or later)' - ), - }, - ), - base.ExtraSpecValidator( - name='powervm:min_proc_units', - description=( - 'Minimum ``proc_units``. The minimum value for the attribute is ' - '0.1 for hosts with firmware level 7.5 or earlier and 0.05 for ' - 'hosts with firmware level 7.6 or later. The maximum value must ' - 'be equal to the maximum value of ``powervm:proc_units``. If you ' - 'specify the attribute, you must also specify ' - '``powervm:proc_units``, ``powervm:max_proc_units``, ' - '``powervm:min_vcpu``, `powervm:max_vcpu``, and ' - '``powervm:dedicated_proc``. Set the ``powervm:dedicated_proc`` ' - 'to false.' - '\n' - 'The value for the attribute cannot be less than 1/10 of the ' - 'value that is specified for powervm:min_vcpu for hosts with ' - 'firmware level 7.5 or earlier and 1/20 of the value that is ' - 'specified for ``powervm:min_vcpu`` for hosts with firmware ' - 'level 7.6 or later. If you do not specify the value of the ' - 'attribute during deployment, it is defaulted to equal the value ' - 'of ``powervm:proc_units``.' - ), - value={ - 'type': str, - 'pattern': r'\d+\.\d+', - 'description': ( - 'Float (divisible by 0.1 for hosts with firmware level 7.5 or ' - 'earlier and 0.05 for hosts with firmware level 7.6 or later)' - ), - }, - ), - base.ExtraSpecValidator( - name='powervm:max_proc_units', - description=( - 'Maximum ``proc_units``. The minimum value can be equal to `` ' - '``powervm:proc_units``. The maximum value for the attribute ' - 'cannot be more than the value of the host for maximum allowed ' - 'processors per partition. If you specify this attribute, you ' - 'must also specify ``powervm:proc_units``, ' - '``powervm:min_proc_units``, ``powervm:min_vcpu``, ' - '``powervm:max_vcpu``, and ``powervm:dedicated_proc``. Set the ' - '``powervm:dedicated_proc`` to false.' - '\n' - 'The value for the attribute cannot be less than 1/10 of the ' - 'value that is specified for powervm:max_vcpu for hosts with ' - 'firmware level 7.5 or earlier and 1/20 of the value that is ' - 'specified for ``powervm:max_vcpu`` for hosts with firmware ' - 'level 7.6 or later. If you do not specify the value of the ' - 'attribute during deployment, the value is defaulted to equal the ' - 'value of ``powervm:proc_units``.' - ), - value={ - 'type': str, - 'pattern': r'\d+\.\d+', - 'description': ( - 'Float (divisible by 0.1 for hosts with firmware level 7.5 or ' - 'earlier and 0.05 for hosts with firmware level 7.6 or later)' - ), - }, - ), - base.ExtraSpecValidator( - name='powervm:dedicated_proc', - description=( - 'Use dedicated processors. The attribute defaults to false.' - ), - value={ - 'type': bool, - }, - ), - base.ExtraSpecValidator( - name='powervm:shared_weight', - description=( - 'Shared processor weight. When ``powervm:dedicated_proc`` is set ' - 'to true and ``powervm:uncapped`` is also set to true, the value ' - 'of the attribute defaults to 128.' - ), - value={ - 'type': int, - 'min': 0, - 'max': 255, - }, - ), - base.ExtraSpecValidator( - name='powervm:availability_priority', - description=( - 'Availability priority. The attribute priority of the server if ' - 'there is a processor failure and there are not enough resources ' - 'for all servers. VIOS and i5 need to remain high priority ' - 'default of 191. The value of the attribute defaults to 128.' - ), - value={ - 'type': int, - 'min': 0, - 'max': 255, - }, - ), - base.ExtraSpecValidator( - name='powervm:uncapped', - description=( - 'LPAR can use unused processor cycles that are beyond or exceed ' - 'the wanted setting of the attribute. This attribute is ' - 'supported only when ``powervm:dedicated_proc`` is set to false. ' - 'When ``powervm:dedicated_proc`` is set to false, ' - '``powervm:uncapped`` defaults to true.' - ), - value={ - 'type': bool, - }, - ), - base.ExtraSpecValidator( - name='powervm:dedicated_sharing_mode', - description=( - 'Sharing mode for dedicated processors. The attribute is ' - 'supported only when ``powervm:dedicated_proc`` is set to true.' - ), - value={ - 'type': str, - 'enum': ( - 'share_idle_procs', - 'keep_idle_procs', - 'share_idle_procs_active', - 'share_idle_procs_always', - ) - }, - ), - base.ExtraSpecValidator( - name='powervm:processor_compatibility', - description=( - 'A processor compatibility mode is a value that is assigned to a ' - 'logical partition by the hypervisor that specifies the processor ' - 'environment in which the logical partition can successfully ' - 'operate.' - ), - value={ - 'type': str, - 'enum': ( - 'default', - 'POWER6', - 'POWER6+', - 'POWER6_Enhanced', - 'POWER6+_Enhanced', - 'POWER7', - 'POWER8' - ), - }, - ), - base.ExtraSpecValidator( - name='powervm:shared_proc_pool_name', - description=( - 'Specifies the shared processor pool to be targeted during ' - 'deployment of a virtual machine.' - ), - value={ - 'type': str, - 'description': 'String with upper limit of 14 characters', - }, - ), - base.ExtraSpecValidator( - name='powervm:srr_capability', - description=( - 'If the value of simplified remote restart capability is set to ' - 'true for the LPAR, you can remote restart the LPAR to supported ' - 'CEC or host when the source CEC or host is down. The attribute ' - 'defaults to false.' - ), - value={ - 'type': bool, - }, - ), -] - - -def register(): - return EXTRA_SPEC_VALIDATORS |