Merge "[install docs] ironic -> openstack baremetal CLI"

10 files changed, 107 insertions, 105 deletions

diff --git a/doc/source/install/configdrive.rst b/doc/source/install/configdrive.rst
index 0d6305926..eef55f999 100644
--- a/doc/source/install/configdrive.rst
+++ b/doc/source/install/configdrive.rst
@@ -46,14 +46,14 @@ and provide the file or HTTP URL to the Bare Metal service.
 
 For the format of the configuration drive, Bare Metal service expects a
 ``gzipped`` and ``base64`` encoded ISO 9660 [*]_ file with a ``config-2``
-label. The
-`ironic client <https://docs.openstack.org/python-ironicclient/latest/>`_
+label. The `openstack baremetal client
+<https://docs.openstack.org/python-ironicclient/latest/cli/osc_plugin_cli.html>`_
 can generate a configuration drive in the `expected format`_. Just pass a
 directory path containing the files that will be injected into it via the
-``--config-drive`` parameter of the ``node-set-provision-state`` command,
-for example::
+``--config-drive`` parameter of the ``openstack baremetal node deploy``
+command, for example::
 
-    ironic node-set-provision-state --config-drive /dir/configdrive_files $node_identifier active
+    openstack baremetal node deploy $node_identifier --config-drive /dir/configdrive_files
 
 
 Configuration drive storage in an object store
diff --git a/doc/source/install/configure-pxe.rst b/doc/source/install/configure-pxe.rst
index fe08c93db..3ee1a9814 100644
--- a/doc/source/install/configure-pxe.rst
+++ b/doc/source/install/configure-pxe.rst
@@ -197,7 +197,7 @@ steps on the ironic conductor node to configure the PXE UEFI environment.
 #. Update the bare metal node with ``boot_mode`` capability in node's properties
    field::
 
-    ironic node-update <node-uuid> add properties/capabilities='boot_mode:uefi'
+    openstack baremetal node set <node-uuid> --property capabilities='boot_mode:uefi'
 
 #. Make sure that bare metal node is configured to boot in UEFI boot mode and
    boot device is set to network/pxe.
diff --git a/doc/source/install/enrollment.rst b/doc/source/install/enrollment.rst
index a5c140ba9..9caec4f3e 100644
--- a/doc/source/install/enrollment.rst
+++ b/doc/source/install/enrollment.rst
@@ -30,12 +30,12 @@ Choosing a driver
 
 When enrolling a node, the most important information to supply is *driver*.
 This can be either a *classic driver* or a *hardware type* - see
-:doc:`enabling-drivers` for the difference. The ``driver-list`` command can
+:doc:`enabling-drivers` for the difference. The ``driver list`` command can
 be used to list all drivers (of both types) enabled on all hosts:
 
 .. code-block:: console
 
-    ironic driver-list
+    openstack baremetal driver list
     +---------------------+-----------------------+
     | Supported driver(s) | Active host(s)        |
     +---------------------+-----------------------+
@@ -48,7 +48,7 @@ also list only classic or only dynamic drivers:
 
 .. code-block:: console
 
-    ironic --ironic-api-version 1.31 driver-list -t dynamic
+    openstack baremetal --os-baremetal-api-version 1.31 driver list --type dynamic
     +---------------------+-----------------------+
     | Supported driver(s) | Active host(s)        |
     +---------------------+-----------------------+
@@ -62,12 +62,12 @@ on that.
 Each driver has a list of *driver properties* that need to be specified via
 the node's ``driver_info`` field, in order for the driver to operate on node.
 This list consists of the properties of the hardware interfaces that the driver
-uses. These driver properties are available with the ``driver-properties``
+uses. These driver properties are available with the ``driver property list``
 command:
 
 .. code-block:: console
 
-    $ ironic driver-properties pxe_ipmitool
+    $ openstack baremetal driver property list pxe_ipmitool
     +----------------------+-------------------------------------------------------------------------------------------------------------+
     | Property             | Description                                                                                                 |
     +----------------------+-------------------------------------------------------------------------------------------------------------+
@@ -123,7 +123,7 @@ This section describes the main steps to enroll a node and make it available
 for provisioning. Some steps are shown separately for illustration purposes,
 and may be combined if desired.
 
-#. Create a node in the Bare Metal service with the ``node-create`` command.
+#. Create a node in the Bare Metal service with the ``node create`` command.
    At a minimum, you must specify the driver name (for example,
    ``pxe_ipmitool``, ``agent_ipmitool`` or ``ipmi``).
 
@@ -132,8 +132,8 @@ and may be combined if desired.
 
    .. code-block:: console
 
-    $ export IRONIC_API_VERSION=1.11
-    $ ironic node-create -d pxe_ipmitool
+    $ export OS_BAREMETAL_API_VERSION=1.11
+    $ openstack baremetal node create --driver pxe_ipmitool
     +--------------+--------------------------------------+
     | Property     | Value                                |
     +--------------+--------------------------------------+
@@ -146,7 +146,7 @@ and may be combined if desired.
     | name         | None                                 |
     +--------------+--------------------------------------+
 
-    $ ironic node-show dfc6189f-ad83-4261-9bda-b27258eb1987
+    $ openstack baremetal node show dfc6189f-ad83-4261-9bda-b27258eb1987
     +------------------------+--------------------------------------+
     | Property               | Value                                |
     +------------------------+--------------------------------------+
@@ -171,8 +171,8 @@ and may be combined if desired.
 
    A node may also be referred to by a logical name as well as its UUID.
    A name can be assigned to the node during its creation by adding the ``-n``
-   option to the ``node-create`` command or by updating an existing node with
-   the ``node-update`` command. See `Logical Names`_ for examples.
+   option to the ``node create`` command or by updating an existing node with
+   the ``node set`` command. See `Logical Names`_ for examples.
 
 #. Starting with API version 1.31 (and ``python-ironicclient`` 1.13), you can
    pick which hardware interface to use with nodes that use hardware types.
@@ -186,15 +186,15 @@ and may be combined if desired.
 
    .. code-block:: console
 
-    $ ironic --ironic-api-version 1.31 node-update $NODE_UUID replace \
-        deploy_interface=direct \
-        raid_interface=agent
+    $ openstack baremetal --os-baremetal-api-version 1.31 node set $NODE_UUID \
+        --deploy-interface direct \
+        --raid-interface agent
 
    or set during node creation:
 
    .. code-block:: console
 
-    $ ironic --ironic-api-version 1.31 node-create -d ipmi \
+    $ openstack baremetal --os-baremetal-api-version 1.31 node create --driver ipmi \
         --deploy-interface direct \
         --raid-interface agent
 
@@ -210,10 +210,10 @@ and may be combined if desired.
 
    .. code-block:: console
 
-    $ ironic node-update $NODE_UUID add \
-        driver_info/ipmi_username=$USER \
-        driver_info/ipmi_password=$PASS \
-        driver_info/ipmi_address=$ADDRESS
+    $ openstack baremetal node set $NODE_UUID \
+        --driver-info ipmi_username=$USER \
+        --driver-info ipmi_password=$PASS \
+        --driver-info ipmi_address=$ADDRESS
 
    .. note::
       If IPMI is running on a port other than 623 (the default). The port must
@@ -222,17 +222,17 @@ and may be combined if desired.
 
       .. code-block:: console
 
-       $ ironic node-update $NODE_UUID add driver_info/ipmi_port=$PORT_NUMBER
+       $ openstack baremetal node set $NODE_UUID --driver-info ipmi_port=$PORT_NUMBER
 
    You may also specify all ``driver_info`` parameters during node
-   creation by passing the **-i** option multiple times:
+   creation by passing the **--driver-info** option multiple times:
 
    .. code-block:: console
 
-     $ ironic node-create -d pxe_ipmitool \
-         -i ipmi_username=$USER \
-         -i ipmi_password=$PASS \
-         -i ipmi_address=$ADDRESS
+     $ openstack baremetal node create --driver pxe_ipmitool \
+         --driver-info ipmi_username=$USER \
+         --driver-info ipmi_password=$PASS \
+         --driver-info ipmi_address=$ADDRESS
 
    See `Choosing a driver`_ above for details on driver properties.
 
@@ -241,9 +241,9 @@ and may be combined if desired.
 
    .. code-block:: console
 
-    $ ironic node-update $NODE_UUID add \
-        driver_info/deploy_kernel=$DEPLOY_VMLINUZ_UUID \
-        driver_info/deploy_ramdisk=$DEPLOY_INITRD_UUID
+    $ openstack baremetal node set $NODE_UUID \
+        --driver-info deploy_kernel=$DEPLOY_VMLINUZ_UUID \
+        --driver-info deploy_ramdisk=$DEPLOY_INITRD_UUID
 
    See :doc:`configure-glance-images` for details.
 
@@ -254,7 +254,7 @@ and may be combined if desired.
 
    .. code-block:: console
 
-    $ ironic port-create -n $NODE_UUID -a $MAC_ADDRESS
+    $ openstack baremetal port create $MAC_ADDRESS --node $NODE_UUID
 
 .. _enrollment-scheduling:
 
@@ -303,25 +303,25 @@ Adding scheduling information
 
    .. code-block:: console
 
-    $ ironic node-update $NODE_UUID add \
-        properties/cpus=$CPU_COUNT \
-        properties/memory_mb=$RAM_MB \
-        properties/local_gb=$DISK_GB \
-        properties/cpu_arch=$ARCH
+    $ openstack baremetal node set $NODE_UUID \
+        --property cpus=$CPU_COUNT \
+        --property memory_mb=$RAM_MB \
+        --property local_gb=$DISK_GB \
+        --property cpu_arch=$ARCH
 
-   As above, these can also be specified at node creation by passing the **-p**
-   option to ``node-create`` multiple times:
+   As above, these can also be specified at node creation by passing the
+   **--property** option to ``node create`` multiple times:
 
    .. code-block:: console
 
-     $ ironic node-create -d pxe_ipmitool \
-         -i ipmi_username=$USER \
-         -i ipmi_password=$PASS \
-         -i ipmi_address=$ADDRESS \
-         -p cpus=$CPU_COUNT \
-         -p memory_mb=$RAM_MB \
-         -p local_gb=$DISK_GB \
-         -p cpu_arch=$ARCH
+     $ openstack baremetal node create --driver pxe_ipmitool \
+         --driver-info ipmi_username=$USER \
+         --driver-info ipmi_password=$PASS \
+         --driver-info ipmi_address=$ADDRESS \
+         --property cpus=$CPU_COUNT \
+         --property memory_mb=$RAM_MB \
+         --property local_gb=$DISK_GB \
+         --property cpu_arch=$ARCH
 
    These values can also be discovered during `Hardware Inspection`_.
 
@@ -348,8 +348,8 @@ Adding scheduling information
 
    .. code-block:: console
 
-    $ ironic node-update $NODE_UUID add \
-        properties/capabilities=key1:val1,key2:val2
+    $ openstack baremetal node set $NODE_UUID \
+        --property capabilities=key1:val1,key2:val2
 
    Some capabilities can also be discovered during `Hardware Inspection`_.
 
@@ -361,7 +361,7 @@ Validating node information
 
    .. code-block:: console
 
-    $ ironic node-validate $NODE_UUID
+    $ openstack baremetal node validate $NODE_UUID
     +------------+--------+--------+
     | Interface  | Result | Reason |
     +------------+--------+--------+
@@ -376,7 +376,7 @@ Validating node information
 
    .. code-block:: console
 
-    $ ironic node-validate $NODE_UUID
+    $ openstack baremetal node validate $NODE_UUID
     +------------+--------+-------------------------------------------------------------------------------------------------------------------------------------+
     | Interface  | Result | Reason                                                                                                                              |
     +------------+--------+-------------------------------------------------------------------------------------------------------------------------------------+
@@ -394,7 +394,7 @@ Validating node information
 
    .. code-block:: console
 
-    $ ironic node-validate $NODE_UUID
+    $ openstack baremetal node validate $NODE_UUID
     +------------+--------+------------------------------------------------------------------------------------------------------------------------------------------------------------------+
     | Interface  | Result | Reason                                                                                                                                                           |
     +------------+--------+------------------------------------------------------------------------------------------------------------------------------------------------------------------+
@@ -424,8 +424,8 @@ To move a node from ``enroll`` to ``manageable`` provision state:
 
 .. code-block:: console
 
-    $ ironic --ironic-api-version 1.11 node-set-provision-state $NODE_UUID manage
-    $ ironic node-show $NODE_UUID
+    $ openstack baremetal --os-baremetal-api-version 1.11 node manage $NODE_UUID
+    $ openstack baremetal node show $NODE_UUID
     +------------------------+--------------------------------------------------------------------+
     | Property               | Value                                                              |
     +------------------------+--------------------------------------------------------------------+
@@ -436,9 +436,9 @@ To move a node from ``enroll`` to ``manageable`` provision state:
     +------------------------+--------------------------------------------------------------------+
 
 .. note:: Since it is an asynchronous call, the response for
-          ``ironic node-set-provision-state`` will not indicate whether the
+          ``openstack baremetal node manage`` will not indicate whether the
           transition succeeded or not. You can check the status of the
-          operation via ``ironic node-show``. If it was successful,
+          operation via ``openstack baremetal node show``. If it was successful,
           ``provision_state`` will be in the desired state. If it failed,
           there will be information in the node's ``last_error``.
 
@@ -450,8 +450,8 @@ To move a node from ``manageable`` to ``available`` provision state:
 
 .. code-block:: console
 
-    $ ironic --ironic-api-version 1.11 node-set-provision-state $NODE_UUID provide
-    $ ironic node-show $NODE_UUID
+    $ openstack baremetal --os-baremetal-api-version 1.11 node provide $NODE_UUID
+    $ openstack baremetal node show $NODE_UUID
     +------------------------+--------------------------------------------------------------------+
     | Property               | Value                                                              |
     +------------------------+--------------------------------------------------------------------+
@@ -471,8 +471,8 @@ Logical names
 
 A node may also be referred to by a logical name as well as its UUID.
 Names can be assigned either during its creation by adding the ``-n``
-option to the ``node-create`` command or by updating an existing node with
-the ``node-update`` command.
+option to the ``node create`` command or by updating an existing node with
+the ``node set`` command.
 
 Node names must be unique, and conform to:
 
@@ -484,13 +484,13 @@ The node is named 'example' in the following examples:
 
 .. code-block:: console
 
-    $ ironic node-create -d agent_ipmitool -n example
+    $ openstack baremetal node create --driver agent_ipmitool --name example
 
 or
 
 .. code-block:: console
 
-    $ ironic node-update $NODE_UUID add name=example
+    $ openstack baremetal node set $NODE_UUID --name example
 
 
 Once assigned a logical name, a node can then be referred to by name or
@@ -498,7 +498,7 @@ UUID interchangeably:
 
 .. code-block:: console
 
-    $ ironic node-create -d agent_ipmitool -n example
+    $ openstack baremetal node create --driver agent_ipmitool --name example
     +--------------+--------------------------------------+
     | Property     | Value                                |
     +--------------+--------------------------------------+
@@ -511,7 +511,7 @@ UUID interchangeably:
     | name         | example                              |
     +--------------+--------------------------------------+
 
-    $ ironic node-show example
+    $ openstack baremetal node show example
     +------------------------+--------------------------------------+
     | Property               | Value                                |
     +------------------------+--------------------------------------+
@@ -544,7 +544,7 @@ interfaces for a hardware type (for your deployment):
 
 .. code-block:: console
 
-    $ openstack --os-baremetal-api-version 1.31 baremetal driver show ipmi
+    $ openstack baremetal --os-baremetal-api-version 1.31 driver show ipmi
     +-------------------------------+----------------+
     | Field                         | Value          |
     +-------------------------------+----------------+
@@ -614,8 +614,8 @@ A new node is created with the ``ipmi`` driver and no interfaces specified:
 
 .. code-block:: console
 
-    $ export IRONIC_API_VERSION=1.31
-    $ ironic node-create -d ipmi
+    $ export OS_BAREMETAL_API_VERSION=1.31
+    $ openstack baremetal node create --driver ipmi
     +--------------+--------------------------------------+
     | Property     | Value                                |
     +--------------+--------------------------------------+
diff --git a/doc/source/install/include/boot-mode.rst b/doc/source/install/include/boot-mode.rst
index ded584305..3ac0f23bd 100644
--- a/doc/source/install/include/boot-mode.rst
+++ b/doc/source/install/include/boot-mode.rst
@@ -22,7 +22,7 @@ The boot modes can be configured in Bare Metal service in the following way:
 
   To configure a node in ``uefi`` mode, then set ``capabilities`` as below::
 
-    ironic node-update <node-uuid> add properties/capabilities='boot_mode:uefi'
+    openstack baremetal node set <node-uuid> --property capabilities='boot_mode:uefi'
 
   Nodes having ``boot_mode`` set to ``uefi`` may be requested by adding an
   ``extra_spec`` to the Compute service flavor::
diff --git a/doc/source/install/include/disk-label.rst b/doc/source/install/include/disk-label.rst
index ab131dcbc..6568db9b9 100644
--- a/doc/source/install/include/disk-label.rst
+++ b/doc/source/install/include/disk-label.rst
@@ -47,7 +47,7 @@ When Ironic is used with the Compute service the disk label should be
 set to node's ``properties/capabilities`` field and also to the flavor
 which will request such capability, for example::
 
-    ironic node-update <node-uuid> add properties/capabilities='disk_label:gpt'
+    openstack baremetal node set <node-uuid> --property capabilities='disk_label:gpt'
 
 As for the flavor::
 
@@ -59,4 +59,4 @@ When used in standalone mode
 When used without the Compute service, the disk label should be set
 directly to the node's ``instance_info`` field, as below::
 
-    ironic node-update <node-uuid> add instance_info/capabilities='{"disk_label": "gpt"}'
+    openstack baremetal node set <node-uuid> --instance-info capabilities='{"disk_label": "gpt"}'
diff --git a/doc/source/install/include/local-boot-partition-images.rst b/doc/source/install/include/local-boot-partition-images.rst
index 7ef085baf..acb8a4aee 100644
--- a/doc/source/install/include/local-boot-partition-images.rst
+++ b/doc/source/install/include/local-boot-partition-images.rst
@@ -27,7 +27,7 @@ Enabling local boot with Compute service
 To enable local boot we need to set a capability on the bare metal node,
 for example::
 
-    ironic node-update <node-uuid> add properties/capabilities="boot_option:local"
+    openstack baremetal node set <node-uuid> --property capabilities="boot_option:local"
 
 
 Nodes having ``boot_option`` set to ``local`` may be requested by adding
@@ -53,4 +53,4 @@ we need a way to enable local boot when Compute is not present. To do that
 we can simply specify the capability via the ``instance_info`` attribute
 of the node, for example::
 
-    ironic node-update <node-uuid> add instance_info/capabilities='{"boot_option": "local"}'
+    openstack baremetal node set <node-uuid> --instance-info capabilities='{"boot_option": "local"}'
diff --git a/doc/source/install/include/root-device-hints.rst b/doc/source/install/include/root-device-hints.rst
index e53b3393e..af4eef041 100644
--- a/doc/source/install/include/root-device-hints.rst
+++ b/doc/source/install/include/root-device-hints.rst
@@ -41,7 +41,7 @@ which disk it should pick for the deployment. The list of supported hints is:
 To associate one or more hints with a node, update the node's properties
 with a ``root_device`` key, for example::
 
-    ironic node-update <node-uuid> add properties/root_device='{"wwn": "0x4000cca77fc4dba1"}'
+    openstack baremetal node set <node-uuid> --property root_device='{"wwn": "0x4000cca77fc4dba1"}'
 
 
 That will guarantee that Bare Metal service will pick the disk device that
@@ -82,11 +82,11 @@ Examples are:
 
 * Finding a disk larger or equal to 60 GiB and non-rotational (SSD)::
 
-    ironic node-update <node-uuid> add properties/root_device='{"size": ">= 60", "rotational": false}'
+    openstack baremetal node set <node-uuid> --property root_device='{"size": ">= 60", "rotational": false}'
 
 * Finding a disk whose vendor is ``samsung`` or ``winsys``::
 
-    ironic node-update <node-uuid> add properties/root_device='{"vendor": "<or> samsung <or> winsys"}'
+    openstack baremetal node set <node-uuid> --property root_device='{"vendor": "<or> samsung <or> winsys"}'
 
 .. note::
     If multiple hints are specified, a device must satisfy all the hints.
diff --git a/doc/source/install/include/trusted-boot.rst b/doc/source/install/include/trusted-boot.rst
index f01cd9191..82de31c5d 100644
--- a/doc/source/install/include/trusted-boot.rst
+++ b/doc/source/install/include/trusted-boot.rst
@@ -27,9 +27,9 @@ with PXE and Nova:
 
 #. Enroll the node and update the node capability value::
 
-    ironic node-create -d pxe_ipmitool
+    openstack baremetal node create --driver pxe_ipmitool
 
-    ironic node-update $NODE_UUID add properties/capabilities={'trusted_boot':true}
+    openstack baremetal node set $NODE_UUID --property capabilities={'trusted_boot':true}
 
 #. Create a special flavor::
 
diff --git a/doc/source/install/standalone.rst b/doc/source/install/standalone.rst
index abcb389db..5a28b4745 100644
--- a/doc/source/install/standalone.rst
+++ b/doc/source/install/standalone.rst
@@ -62,23 +62,26 @@ There are however some limitations for different drivers:
 
 Steps to start a deployment are pretty similar to those when using Compute:
 
-#. To use the `ironic CLI <https://docs.openstack.org/python-ironicclient/latest/cli/>`_,
+#. To use the `openstack baremetal CLI
+   <https://docs.openstack.org/python-ironicclient/latest/cli/osc_plugin_cli.html>`_,
    set up these environment variables. Since no authentication strategy is
-   being used, the value can be any string for OS_AUTH_TOKEN. IRONIC_URL is
+   being used, the value can be any string for OS_TOKEN. OS_URL is
    the URL of the ironic-api process.
    For example::
 
-    export OS_AUTH_TOKEN=fake-token
-    export IRONIC_URL=http://localhost:6385/
+    export OS_TOKEN=fake-token
+    export OS_URL=http://localhost:6385/
 
 #. Create a node in Bare Metal service. At minimum, you must specify the driver
    name (for example, "pxe_ipmitool"). You can also specify all the required
    driver parameters in one command. This will return the node UUID::
 
-    ironic node-create -d pxe_ipmitool -i ipmi_address=ipmi.server.net \
-    -i ipmi_username=user -i ipmi_password=pass \
-    -i deploy_kernel=file:///images/deploy.vmlinuz \
-    -i deploy_ramdisk=http://my.server.net/images/deploy.ramdisk
+    openstack node create --driver pxe_ipmitool \
+        --driver-info ipmi_address=ipmi.server.net \
+        --driver-info ipmi_username=user \
+        --driver-info ipmi_password=pass \
+        --driver-info deploy_kernel=file:///images/deploy.vmlinuz \
+        --driver-info deploy_ramdisk=http://my.server.net/images/deploy.ramdisk
 
     +--------------+--------------------------------------------------------------------------+
     | Property     | Value                                                                    |
@@ -107,26 +110,28 @@ Steps to start a deployment are pretty similar to those when using Compute:
    cards which are part of the node by creating a port with each NIC's MAC
    address. In this case, they're used for naming of PXE configs for a node::
 
-    ironic port-create -n $NODE_UUID -a $MAC_ADDRESS
+    openstack baremetal port create $MAC_ADDRESS --node $NODE_UUID
 
 #. As there is no Compute service flavor and instance image is not provided with
    nova boot command, you also need to specify some fields in ``instance_info``.
    For PXE deployment, they are ``image_source``, ``kernel``, ``ramdisk``,
    ``root_gb``::
 
-    ironic node-update $NODE_UUID add instance_info/image_source=$IMG \
-    instance_info/kernel=$KERNEL instance_info/ramdisk=$RAMDISK \
-    instance_info/root_gb=10
+    openstack baremetal node set $NODE_UUID \
+        --instance-info image_source=$IMG \
+        --instance-info kernel=$KERNEL \
+        --instance-info ramdisk=$RAMDISK \
+        --instance-info root_gb=10
 
    Here $IMG, $KERNEL, $RAMDISK can also be HTTP(S) or file hrefs. For agent
    drivers, you don't need to specify kernel and ramdisk, but MD5 checksum of
    instance image is required::
 
-    ironic node-update $NODE_UUID add instance_info/image_checksum=$MD5HASH
+    openstack baremetal node set $NODE_UUID --instance-info image_checksum=$MD5HASH
 
 #. Validate that all parameters are correct::
 
-    ironic node-validate $NODE_UUID
+    openstack baremetal node validate $NODE_UUID
 
     +------------+--------+----------------------------------------------------------------+
     | Interface  | Result | Reason                                                         |
@@ -139,10 +144,7 @@ Steps to start a deployment are pretty similar to those when using Compute:
 
 #. Now you can start the deployment, run::
 
-    ironic node-set-provision-state $NODE_UUID active
-
-   You can manage provisioning by issuing this command. Valid provision states
-   are ``active``, ``rebuild`` and ``deleted``.
+    openstack baremetal node deploy $NODE_UUID
 
 For iLO drivers, fields that should be provided are:
 
diff --git a/doc/source/install/troubleshooting.rst b/doc/source/install/troubleshooting.rst
index 53b9c8d90..b2dc16e0b 100644
--- a/doc/source/install/troubleshooting.rst
+++ b/doc/source/install/troubleshooting.rst
@@ -21,14 +21,14 @@ therein should match the bare metal node properties, and the Compute service fla
 Here is an example set of commands to compare the resources in Compute
 service and Bare Metal service::
 
-    $ ironic node-list
+    $ openstack baremetal node list
     +--------------------------------------+---------------+-------------+--------------------+-------------+
     | UUID                                 | Instance UUID | Power State | Provisioning State | Maintenance |
     +--------------------------------------+---------------+-------------+--------------------+-------------+
     | 86a2b1bb-8b29-4964-a817-f90031debddb | None          | power off   | available          | False       |
     +--------------------------------------+---------------+-------------+--------------------+-------------+
 
-    $ ironic node-show 86a2b1bb-8b29-4964-a817-f90031debddb
+    $ openstack baremetal node show 86a2b1bb-8b29-4964-a817-f90031debddb
     +------------------------+----------------------------------------------------------------------+
     | Property               | Value                                                                |
     +------------------------+----------------------------------------------------------------------+
@@ -92,17 +92,17 @@ the node to the nova scheduler. Nodes can be placed into maintenance mode
 with the following command.
 ::
 
-    $ ironic node-set-maintenance $NODE_UUID on
+    $ openstack baremetal node maintenance set $NODE_UUID
 
 A maintenance reason may be included with the optional ``--reason`` command
 line option. This is a free form text field that will be displayed in the
-``maintenance_reason`` section of the ``node-show`` command.
+``maintenance_reason`` section of the ``node show`` command.
 
 ::
 
-    $ ironic node-set-maintenance $UUID on --reason "Need to add ram."
+    $ openstack baremetal node maintenance set $UUID --reason "Need to add ram."
 
-    $ ironic node-show $UUID
+    $ openstack baremetal node show $UUID
 
     +------------------------+--------------------------------------+
     | Property               | Value                                |
@@ -121,7 +121,7 @@ To remove maintenance mode and clear any ``maintenance_reason`` use the
 following command.
 ::
 
-    $ ironic node-set-maintenance $NODE_UUID off
+    $ openstack baremetal node maintenance unset $NODE_UUID
 
 
 .. _ironic-python-agent: https://docs.openstack.org/ironic-python-agent/latest/