- pvalchev@cvs.openbsd.org 2007/06/07 19:37:34

     [kex.h mac.c mac.h monitor_wrap.c myproposal.h packet.c ssh.1]
     [ssh_config.5 sshd.8 sshd_config.5]
     Add a new MAC algorithm for data integrity, UMAC-64 (not default yet,
     must specify umac-64@openssh.com). Provides about 20% end-to-end speedup
     compared to hmac-md5. Represents a different approach to message
     authentication to that of HMAC that may be beneficial if HMAC based on
     one of its underlying hash algorithms is found to be vulnerable to a
     new attack.  http://www.ietf.org/rfc/rfc4418.txt
     in conjunction with and OK djm@

14 files changed, 1512 insertions, 58 deletions

diff --git a/ChangeLog b/ChangeLog
index b1bc60ef..48d2e97b 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,7 +1,16 @@
 20070611
  - (djm) Bugzilla #1306: silence spurious error messages from hang-on-exit
    fix; tested by dtucker@ and jochen.kirn AT gmail.com
-
+   - pvalchev@cvs.openbsd.org 2007/06/07 19:37:34
+     [kex.h mac.c mac.h monitor_wrap.c myproposal.h packet.c ssh.1]
+     [ssh_config.5 sshd.8 sshd_config.5]
+     Add a new MAC algorithm for data integrity, UMAC-64 (not default yet,
+     must specify umac-64@openssh.com). Provides about 20% end-to-end speedup
+     compared to hmac-md5. Represents a different approach to message
+     authentication to that of HMAC that may be beneficial if HMAC based on
+     one of its underlying hash algorithms is found to be vulnerable to a
+     new attack.  http://www.ietf.org/rfc/rfc4418.txt
+     in conjunction with and OK djm@
 20070605
  - (dtucker) OpenBSD CVS Sync
    - djm@cvs.openbsd.org 2007/05/22 10:18:52
@@ -2976,4 +2985,4 @@
    OpenServer 6 and add osr5bigcrypt support so when someone migrates
    passwords between UnixWare and OpenServer they will still work. OK dtucker@
 
-$Id: ChangeLog,v 1.4680 2007/06/11 03:03:16 djm Exp $
+$Id: ChangeLog,v 1.4681 2007/06/11 04:01:42 djm Exp $
diff --git a/Makefile.in b/Makefile.in
index 6630baa8..2486edc9 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,4 +1,4 @@
-# $Id: Makefile.in,v 1.284 2007/03/25 08:26:01 dtucker Exp $
+# $Id: Makefile.in,v 1.285 2007/06/11 04:01:42 djm Exp $
 
 # uncomment if you run a non bourne compatable shell. Ie. csh
 #SHELL = @SH@
@@ -71,7 +71,7 @@ LIBSSH_OBJS=acss.o authfd.o authfile.o bufaux.o bufbn.o buffer.o \
 	atomicio.o key.o dispatch.o kex.o mac.o uidswap.o uuencode.o misc.o \
 	monitor_fdpass.o rijndael.o ssh-dss.o ssh-rsa.o dh.o kexdh.o \
 	kexgex.o kexdhc.o kexgexc.o scard.o msg.o progressmeter.o dns.o \
-	entropy.o scard-opensc.o gss-genr.o
+	entropy.o scard-opensc.o gss-genr.o umac.o
 
 SSHOBJS= ssh.o readconf.o clientloop.o sshtty.o \
 	sshconnect.o sshconnect1.o sshconnect2.o
diff --git a/kex.h b/kex.h
index ecf43130..8e29c90e 100644
--- a/kex.h
+++ b/kex.h
@@ -1,4 +1,4 @@
-/* $OpenBSD: kex.h,v 1.45 2007/06/05 06:52:37 djm Exp $ */
+/* $OpenBSD: kex.h,v 1.46 2007/06/07 19:37:34 pvalchev Exp $ */
 
 /*
  * Copyright (c) 2000, 2001 Markus Friedl.  All rights reserved.
@@ -87,11 +87,13 @@ struct Enc {
 struct Mac {
 	char	*name;
 	int	enabled;
-	const EVP_MD	*md;
 	u_int	mac_len;
 	u_char	*key;
 	u_int	key_len;
-	HMAC_CTX	ctx;
+	int	type;
+	const EVP_MD	*evp_md;
+	HMAC_CTX	evp_ctx;
+	struct umac_ctx *umac_ctx;
 };
 struct Comp {
 	int	type;
diff --git a/mac.c b/mac.c
index 6a5fd476..34464659 100644
--- a/mac.c
+++ b/mac.c
@@ -1,4 +1,4 @@
-/* $OpenBSD: mac.c,v 1.13 2007/06/05 06:52:37 djm Exp $ */
+/* $OpenBSD: mac.c,v 1.14 2007/06/07 19:37:34 pvalchev Exp $ */
 /*
  * Copyright (c) 2001 Markus Friedl.  All rights reserved.
  *
@@ -42,35 +42,57 @@
 #include "mac.h"
 #include "misc.h"
 
+#include "umac.h"
+
+#define SSH_EVP		1	/* OpenSSL EVP-based MAC */
+#define SSH_UMAC	2	/* UMAC (not integrated with OpenSSL) */
+
 struct {
 	char		*name;
+	int		type;
 	const EVP_MD *	(*mdfunc)(void);
 	int		truncatebits;	/* truncate digest if != 0 */
+	int		key_len;	/* just for UMAC */
+	int		len;		/* just for UMAC */
 } macs[] = {
-	{ "hmac-sha1",			EVP_sha1, 0, },
-	{ "hmac-sha1-96",		EVP_sha1, 96 },
-	{ "hmac-md5",			EVP_md5, 0 },
-	{ "hmac-md5-96",		EVP_md5, 96 },
-	{ "hmac-ripemd160",		EVP_ripemd160, 0 },
-	{ "hmac-ripemd160@openssh.com",	EVP_ripemd160, 0 },
-	{ NULL,				NULL, 0 }
+	{ "hmac-sha1",			SSH_EVP, EVP_sha1, 0, -1, -1 },
+	{ "hmac-sha1-96",		SSH_EVP, EVP_sha1, 96, -1, -1 },
+	{ "hmac-md5",			SSH_EVP, EVP_md5, 0, -1, -1 },
+	{ "hmac-md5-96",		SSH_EVP, EVP_md5, 96, -1, -1 },
+	{ "hmac-ripemd160",		SSH_EVP, EVP_ripemd160, 0, -1, -1 },
+	{ "hmac-ripemd160@openssh.com",	SSH_EVP, EVP_ripemd160, 0, -1, -1 },
+	{ "umac-64@openssh.com",	SSH_UMAC, NULL, 0, 128, 64 },
+	{ NULL,				0, NULL, 0, -1, -1 }
 };
 
+static void
+mac_setup_by_id(Mac *mac, int which)
+{
+	int evp_len;
+	mac->type = macs[which].type;
+	if (mac->type == SSH_EVP) {
+		mac->evp_md = (*macs[which].mdfunc)();
+		if ((evp_len = EVP_MD_size(mac->evp_md)) <= 0)
+			fatal("mac %s len %d", mac->name, evp_len);
+		mac->key_len = mac->mac_len = (u_int)evp_len;
+	} else {
+		mac->mac_len = macs[which].len / 8;
+		mac->key_len = macs[which].key_len / 8;
+		mac->umac_ctx = NULL;
+	}
+	if (macs[which].truncatebits != 0)
+		mac->mac_len = macs[which].truncatebits / 8;
+}
+
 int
 mac_setup(Mac *mac, char *name)
 {
-	int i, evp_len;
+	int i;
 
 	for (i = 0; macs[i].name; i++) {
 		if (strcmp(name, macs[i].name) == 0) {
-			if (mac != NULL) {
-				mac->md = (*macs[i].mdfunc)();
-				if ((evp_len = EVP_MD_size(mac->md)) <= 0)
-					fatal("mac %s len %d", name, evp_len);
-				mac->key_len = mac->mac_len = (u_int)evp_len;
-				if (macs[i].truncatebits != 0)
-					mac->mac_len = macs[i].truncatebits/8;
-			}
+			if (mac != NULL)
+				mac_setup_by_id(mac, i);
 			debug2("mac_setup: found %s", name);
 			return (0);
 		}
@@ -79,34 +101,65 @@ mac_setup(Mac *mac, char *name)
 	return (-1);
 }
 
-void
+int
 mac_init(Mac *mac)
 {
 	if (mac->key == NULL)
 		fatal("mac_init: no key");
-	HMAC_Init(&mac->ctx, mac->key, mac->key_len, mac->md);
+	switch (mac->type) {
+	case SSH_EVP:
+		if (mac->evp_md == NULL)
+			return -1;
+		HMAC_Init(&mac->evp_ctx, mac->key, mac->key_len, mac->evp_md);
+		return 0;
+	case SSH_UMAC:
+		mac->umac_ctx = umac_new(mac->key);
+		return 0;
+	default:
+		return -1;
+	}
 }
 
 u_char *
 mac_compute(Mac *mac, u_int32_t seqno, u_char *data, int datalen)
 {
 	static u_char m[EVP_MAX_MD_SIZE];
-	u_char b[4];
+	u_char b[4], nonce[8];
 
 	if (mac->mac_len > sizeof(m))
-		fatal("mac_compute: mac too long");
-	put_u32(b, seqno);
-	HMAC_Init(&mac->ctx, NULL, 0, NULL);	/* reset HMAC context */
-	HMAC_Update(&mac->ctx, b, sizeof(b));
-	HMAC_Update(&mac->ctx, data, datalen);
-	HMAC_Final(&mac->ctx, m, NULL);
+		fatal("mac_compute: mac too long %u %lu",
+		    mac->mac_len, sizeof(m));
+
+	switch (mac->type) {
+	case SSH_EVP:
+		put_u32(b, seqno);
+		/* reset HMAC context */
+		HMAC_Init(&mac->evp_ctx, NULL, 0, NULL);
+		HMAC_Update(&mac->evp_ctx, b, sizeof(b));
+		HMAC_Update(&mac->evp_ctx, data, datalen);
+		HMAC_Final(&mac->evp_ctx, m, NULL);
+		break;
+	case SSH_UMAC:
+		put_u64(nonce, seqno);
+		umac_update(mac->umac_ctx, data, datalen);
+		umac_final(mac->umac_ctx, m, nonce);
+		break;
+	default:
+		fatal("mac_compute: unknown MAC type");
+	}
 	return (m);
 }
 
 void
 mac_clear(Mac *mac)
 {
-	HMAC_cleanup(&mac->ctx);
+	if (mac->type == SSH_UMAC) {
+		if (mac->umac_ctx != NULL)
+			umac_delete(mac->umac_ctx);
+	} else if (mac->evp_md != NULL)
+		HMAC_cleanup(&mac->evp_ctx);
+	mac->evp_md = NULL;
+	mac->umac_ctx = NULL;
 }
 
 /* XXX copied from ciphers_valid */
diff --git a/mac.h b/mac.h
index 2010c9d3..39f564dd 100644
--- a/mac.h
+++ b/mac.h
@@ -1,4 +1,4 @@
-/* $OpenBSD: mac.h,v 1.5 2007/06/05 06:52:37 djm Exp $ */
+/* $OpenBSD: mac.h,v 1.6 2007/06/07 19:37:34 pvalchev Exp $ */
 /*
  * Copyright (c) 2001 Markus Friedl.  All rights reserved.
  *
@@ -25,6 +25,6 @@
 
 int	 mac_valid(const char *);
 int	 mac_setup(Mac *, char *);
-void	 mac_init(Mac *);
+int	 mac_init(Mac *);
 u_char	*mac_compute(Mac *, u_int32_t, u_char *, int);
 void	 mac_clear(Mac *);
diff --git a/monitor_wrap.c b/monitor_wrap.c
index 61f7c688..edf2814e 100644
--- a/monitor_wrap.c
+++ b/monitor_wrap.c
@@ -1,4 +1,4 @@
-/* $OpenBSD: monitor_wrap.c,v 1.56 2007/06/05 06:52:37 djm Exp $ */
+/* $OpenBSD: monitor_wrap.c,v 1.57 2007/06/07 19:37:34 pvalchev Exp $ */
 /*
  * Copyright 2002 Niels Provos <provos@citi.umich.edu>
  * Copyright 2002 Markus Friedl <markus@openbsd.org>
@@ -477,7 +477,7 @@ mm_newkeys_from_blob(u_char *blob, int blen)
 	/* Mac structure */
 	mac->name = buffer_get_string(&b, NULL);
 	if (mac->name == NULL || mac_setup(mac, mac->name) == -1)
-		fatal("%s: can not init mac %s", __func__, mac->name);
+		fatal("%s: can not setup mac %s", __func__, mac->name);
 	mac->enabled = buffer_get_int(&b);
 	mac->key = buffer_get_string(&b, &len);
 	if (len > mac->key_len)
diff --git a/myproposal.h b/myproposal.h
index e246e0dd..87a9e582 100644
--- a/myproposal.h
+++ b/myproposal.h
@@ -1,4 +1,4 @@
-/* $OpenBSD: myproposal.h,v 1.21 2006/03/25 22:22:43 djm Exp $ */
+/* $OpenBSD: myproposal.h,v 1.22 2007/06/07 19:37:34 pvalchev Exp $ */
 
 /*
  * Copyright (c) 2000 Markus Friedl.  All rights reserved.
@@ -47,7 +47,7 @@
 	"aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se," \
 	"aes128-ctr,aes192-ctr,aes256-ctr"
 #define	KEX_DEFAULT_MAC \
-	"hmac-md5,hmac-sha1,hmac-ripemd160," \
+	"hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160," \
 	"hmac-ripemd160@openssh.com," \
 	"hmac-sha1-96,hmac-md5-96"
 #define	KEX_DEFAULT_COMP	"none,zlib@openssh.com,zlib"
diff --git a/packet.c b/packet.c
index 27489801..f82a63c4 100644
--- a/packet.c
+++ b/packet.c
@@ -1,4 +1,4 @@
-/* $OpenBSD: packet.c,v 1.147 2007/06/05 06:52:37 djm Exp $ */
+/* $OpenBSD: packet.c,v 1.148 2007/06/07 19:37:34 pvalchev Exp $ */
 /*
  * Author: Tatu Ylonen <ylo@cs.hut.fi>
  * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
@@ -629,8 +629,7 @@ set_newkeys(int mode)
 		enc  = &newkeys[mode]->enc;
 		mac  = &newkeys[mode]->mac;
 		comp = &newkeys[mode]->comp;
-		if (mac->md != NULL)
-			mac_clear(mac);
+		mac_clear(mac);
 		xfree(enc->name);
 		xfree(enc->iv);
 		xfree(enc->key);
@@ -645,10 +644,8 @@ set_newkeys(int mode)
 	enc  = &newkeys[mode]->enc;
 	mac  = &newkeys[mode]->mac;
 	comp = &newkeys[mode]->comp;
-	if (mac->md != NULL) {
-		mac_init(mac);
+	if (mac_init(mac) == 0)
 		mac->enabled = 1;
-	}
 	DBG(debug("cipher_init_context: %d", mode));
 	cipher_init(cc, enc->cipher, enc->key, enc->key_len,
 	    enc->iv, enc->block_size, crypt_type);
diff --git a/ssh.1 b/ssh.1
index d6888ad0..6b76c1c0 100644
--- a/ssh.1
+++ b/ssh.1
@@ -34,8 +34,8 @@
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.\" $OpenBSD: ssh.1,v 1.267 2007/05/31 19:20:16 jmc Exp $
-.Dd $Mdocdate: May 31 2007 $
+.\" $OpenBSD: ssh.1,v 1.268 2007/06/07 19:37:34 pvalchev Exp $
+.Dd $Mdocdate: June 7 2007 $
 .Dt SSH 1
 .Os
 .Sh NAME
@@ -674,7 +674,7 @@ Both protocols support similar authentication methods,
 but protocol 2 is preferred since
 it provides additional mechanisms for confidentiality
 (the traffic is encrypted using AES, 3DES, Blowfish, CAST128, or Arcfour)
-and integrity (hmac-md5, hmac-sha1, hmac-ripemd160).
+and integrity (hmac-md5, hmac-sha1, umac-64, hmac-ripemd160).
 Protocol 1 lacks a strong mechanism for ensuring the
 integrity of the connection.
 .Pp
diff --git a/ssh_config.5 b/ssh_config.5
index 43465eff..4537fb7f 100644
--- a/ssh_config.5
+++ b/ssh_config.5
@@ -34,8 +34,8 @@
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.\" $OpenBSD: ssh_config.5,v 1.99 2007/05/31 19:20:16 jmc Exp $
-.Dd $Mdocdate: May 31 2007 $
+.\" $OpenBSD: ssh_config.5,v 1.100 2007/06/07 19:37:34 pvalchev Exp $
+.Dd $Mdocdate: June 7 2007 $
 .Dt SSH_CONFIG 5
 .Os
 .Sh NAME
@@ -641,7 +641,7 @@ The MAC algorithm is used in protocol version 2
 for data integrity protection.
 Multiple algorithms must be comma-separated.
 The default is:
-.Dq hmac-md5,hmac-sha1,hmac-ripemd160,hmac-sha1-96,hmac-md5-96 .
+.Dq hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-sha1-96,hmac-md5-96 .
 .It Cm NoHostAuthenticationForLocalhost
 This option can be used if the home directory is shared across machines.
 In this case localhost will refer to a different machine on each of
diff --git a/sshd.8 b/sshd.8
index ad5c865e..023930e8 100644
--- a/sshd.8
+++ b/sshd.8
@@ -34,8 +34,8 @@
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.\" $OpenBSD: sshd.8,v 1.236 2007/05/31 19:20:16 jmc Exp $
-.Dd $Mdocdate: May 31 2007 $
+.\" $OpenBSD: sshd.8,v 1.237 2007/06/07 19:37:34 pvalchev Exp $
+.Dd $Mdocdate: June 7 2007 $
 .Dt SSHD 8
 .Os
 .Sh NAME
@@ -276,7 +276,7 @@ The client selects the encryption algorithm
 to use from those offered by the server.
 Additionally, session integrity is provided
 through a cryptographic message authentication code
-(hmac-sha1 or hmac-md5).
+(hmac-md5, hmac-sha1, umac-64 or hmac-ripemd160).
 .Pp
 Finally, the server and the client enter an authentication dialog.
 The client tries to authenticate itself using
diff --git a/sshd_config.5 b/sshd_config.5
index 8b72ecc8..528f5214 100644
--- a/sshd_config.5
+++ b/sshd_config.5
@@ -34,8 +34,8 @@
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.\" $OpenBSD: sshd_config.5,v 1.75 2007/05/31 19:20:17 jmc Exp $
-.Dd $Mdocdate: May 31 2007 $
+.\" $OpenBSD: sshd_config.5,v 1.76 2007/06/07 19:37:34 pvalchev Exp $
+.Dd $Mdocdate: June 7 2007 $
 .Dt SSHD_CONFIG 5
 .Os
 .Sh NAME
@@ -489,7 +489,7 @@ The MAC algorithm is used in protocol version 2
 for data integrity protection.
 Multiple algorithms must be comma-separated.
 The default is:
-.Dq hmac-md5,hmac-sha1,hmac-ripemd160,hmac-sha1-96,hmac-md5-96 .
+.Dq hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-sha1-96,hmac-md5-96 .
 .It Cm Match
 Introduces a conditional block.
 If all of the criteria on the
diff --git a/umac.c b/umac.c
new file mode 100644
index 00000000..676705c9
--- /dev/null
+++ b/umac.c
@@ -0,0 +1,1270 @@
+/* $OpenBSD: umac.c,v 1.1 2007/06/07 19:37:34 pvalchev Exp $ */
+/* -----------------------------------------------------------------------
+ * 
+ * umac.c -- C Implementation UMAC Message Authentication
+ *
+ * Version 0.93b of rfc4418.txt -- 2006 July 18
+ *
+ * For a full description of UMAC message authentication see the UMAC
+ * world-wide-web page at http://www.cs.ucdavis.edu/~rogaway/umac
+ * Please report bugs and suggestions to the UMAC webpage.
+ *
+ * Copyright (c) 1999-2006 Ted Krovetz
+ *                                                                 
+ * Permission to use, copy, modify, and distribute this software and
+ * its documentation for any purpose and with or without fee, is hereby
+ * granted provided that the above copyright notice appears in all copies
+ * and in supporting documentation, and that the name of the copyright
+ * holder not be used in advertising or publicity pertaining to
+ * distribution of the software without specific, written prior permission.
+ *
+ * Comments should be directed to Ted Krovetz (tdk@acm.org)                                        
+ *                                                                   
+ * ---------------------------------------------------------------------- */
+ 
+ /* ////////////////////// IMPORTANT NOTES /////////////////////////////////
+  *
+  * 1) This version does not work properly on messages larger than 16MB
+  *
+  * 2) If you set the switch to use SSE2, then all data must be 16-byte
+  *    aligned
+  *
+  * 3) When calling the function umac(), it is assumed that msg is in
+  * a writable buffer of length divisible by 32 bytes. The message itself
+  * does not have to fill the entire buffer, but bytes beyond msg may be
+  * zeroed.
+  *
+  * 4) Three free AES implementations are supported by this implementation of
+  * UMAC. Paulo Barreto's version is in the public domain and can be found
+  * at http://www.esat.kuleuven.ac.be/~rijmen/rijndael/ (search for
+  * "Barreto"). The only two files needed are rijndael-alg-fst.c and
+  * rijndael-alg-fst.h. Brian Gladman's version is distributed with the GNU
+  * Public lisence at http://fp.gladman.plus.com/AES/index.htm. It
+  * includes a fast IA-32 assembly version. The OpenSSL crypo library is
+  * the third.
+  *
+  * 5) With FORCE_C_ONLY flags set to 0, incorrect results are sometimes
+  * produced under gcc with optimizations set -O3 or higher. Dunno why.
+  *
+  /////////////////////////////////////////////////////////////////////// */
+ 
+/* ---------------------------------------------------------------------- */
+/* --- User Switches ---------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+
+#define UMAC_OUTPUT_LEN     8  /* Alowable: 4, 8, 12, 16                  */
+/* #define FORCE_C_ONLY        1  ANSI C and 64-bit integers req'd        */
+/* #define AES_IMPLEMENTAION   1  1 = OpenSSL, 2 = Barreto, 3 = Gladman   */
+/* #define SSE2                0  Is SSE2 is available?                   */
+/* #define RUN_TESTS           0  Run basic correctness/speed tests       */
+/* #define UMAC_AE_SUPPORT     0  Enable auhthenticated encrytion         */
+
+/* ---------------------------------------------------------------------- */
+/* -- Global Includes --------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+
+#include "includes.h"
+#include <sys/types.h>
+
+#include "umac.h"
+#include <string.h>
+#include <stdlib.h>
+#include <stddef.h>
+
+/* ---------------------------------------------------------------------- */
+/* --- Primitive Data Types ---                                           */
+/* ---------------------------------------------------------------------- */
+
+/* The following assumptions may need change on your system */
+typedef u_int8_t	UINT8;  /* 1 byte   */
+typedef u_int16_t	UINT16; /* 2 byte   */
+typedef u_int32_t	UINT32; /* 4 byte   */
+typedef u_int64_t	UINT64; /* 8 bytes  */
+typedef unsigned int	UWORD;  /* Register */
+
+/* ---------------------------------------------------------------------- */
+/* --- Constants -------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+
+#define UMAC_KEY_LEN           16  /* UMAC takes 16 bytes of external key */
+
+/* Message "words" are read from memory in an endian-specific manner.     */
+/* For this implementation to behave correctly, __LITTLE_ENDIAN__ must    */
+/* be set true if the host computer is little-endian.                     */
+
+#if BYTE_ORDER == LITTLE_ENDIAN
+#define __LITTLE_ENDIAN__ 1
+#else
+#define __LITTLE_ENDIAN__ 0
+#endif
+
+/* ---------------------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+/* ----- Architecture Specific ------------------------------------------ */
+/* ---------------------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+
+
+/* ---------------------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+/* ----- Primitive Routines --------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+
+
+/* ---------------------------------------------------------------------- */
+/* --- 32-bit by 32-bit to 64-bit Multiplication ------------------------ */
+/* ---------------------------------------------------------------------- */
+
+#define MUL64(a,b) ((UINT64)((UINT64)(UINT32)(a) * (UINT64)(UINT32)(b)))
+
+/* ---------------------------------------------------------------------- */
+/* --- Endian Conversion --- Forcing assembly on some platforms           */
+/* ---------------------------------------------------------------------- */
+
+#if 0
+static UINT32 LOAD_UINT32_REVERSED(void *ptr)
+{
+    UINT32 temp = *(UINT32 *)ptr;
+    temp = (temp >> 24) | ((temp & 0x00FF0000) >> 8 )
+         | ((temp & 0x0000FF00) << 8 ) | (temp << 24);
+    return (UINT32)temp;
+}
+
+static void STORE_UINT32_REVERSED(void *ptr, UINT32 x)
+{
+    UINT32 i = (UINT32)x;
+    *(UINT32 *)ptr = (i >> 24) | ((i & 0x00FF0000) >> 8 )
+                   | ((i & 0x0000FF00) << 8 ) | (i << 24);
+}
+#endif
+
+/* The following definitions use the above reversal-primitives to do the right
+ * thing on endian specific load and stores.
+ */
+
+#define LOAD_UINT32_REVERSED(p)		(swap32(*(UINT32 *)(p)))
+#define STORE_UINT32_REVERSED(p,v) 	(*(UINT32 *)(p) = swap32(v))
+
+#if (__LITTLE_ENDIAN__)
+#define LOAD_UINT32_LITTLE(ptr)     (*(UINT32 *)(ptr))
+#define STORE_UINT32_BIG(ptr,x)     STORE_UINT32_REVERSED(ptr,x)
+#else
+#define LOAD_UINT32_LITTLE(ptr)     LOAD_UINT32_REVERSED(ptr)
+#define STORE_UINT32_BIG(ptr,x)     (*(UINT32 *)(ptr) = (UINT32)(x))
+#endif
+
+
+
+/* ---------------------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+/* ----- Begin KDF & PDF Section ---------------------------------------- */
+/* ---------------------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+
+/* UMAC uses AES with 16 byte block and key lengths */
+#define AES_BLOCK_LEN  16
+
+/* OpenSSL's AES */
+#include <openssl/aes.h>
+typedef AES_KEY aes_int_key[1];
+#define aes_encryption(in,out,int_key)                  \
+  AES_encrypt((u_char *)(in),(u_char *)(out),(AES_KEY *)int_key)
+#define aes_key_setup(key,int_key)                      \
+  AES_set_encrypt_key((u_char *)(key),UMAC_KEY_LEN*8,int_key)
+
+/* The user-supplied UMAC key is stretched using AES in a counter
+ * mode to supply all random bits needed by UMAC. The kdf function takes
+ * an AES internal key representation 'key' and writes a stream of
+ * 'nbytes' bytes to the memory pointed at by 'buffer_ptr'. Each distinct
+ * 'ndx' causes a distinct byte stream.
+ */
+static void kdf(void *buffer_ptr, aes_int_key key, UINT8 ndx, int nbytes)
+{
+    UINT8 in_buf[AES_BLOCK_LEN] = {0};
+    UINT8 out_buf[AES_BLOCK_LEN];
+    UINT8 *dst_buf = (UINT8 *)buffer_ptr;
+    int i;
+    
+    /* Setup the initial value */
+    in_buf[AES_BLOCK_LEN-9] = ndx;
+    in_buf[AES_BLOCK_LEN-1] = i = 1;
+        
+    while (nbytes >= AES_BLOCK_LEN) {
+        aes_encryption(in_buf, out_buf, key);
+        memcpy(dst_buf,out_buf,AES_BLOCK_LEN);
+        in_buf[AES_BLOCK_LEN-1] = ++i;
+        nbytes -= AES_BLOCK_LEN;
+        dst_buf += AES_BLOCK_LEN;
+    }
+    if (nbytes) {
+        aes_encryption(in_buf, out_buf, key);
+        memcpy(dst_buf,out_buf,nbytes);
+    }
+}
+
+/* The final UHASH result is XOR'd with the output of a pseudorandom
+ * function. Here, we use AES to generate random output and 
+ * xor the appropriate bytes depending on the last bits of nonce.
+ * This scheme is optimized for sequential, increasing big-endian nonces.
+ */
+
+typedef struct {
+    UINT8 cache[AES_BLOCK_LEN];  /* Previous AES output is saved      */
+    UINT8 nonce[AES_BLOCK_LEN];  /* The AES input making above cache  */
+    aes_int_key prf_key;         /* Expanded AES key for PDF          */
+} pdf_ctx;
+
+static void pdf_init(pdf_ctx *pc, aes_int_key prf_key)
+{
+    UINT8 buf[UMAC_KEY_LEN];
+    
+    kdf(buf, prf_key, 0, UMAC_KEY_LEN);
+    aes_key_setup(buf, pc->prf_key);
+    
+    /* Initialize pdf and cache */
+    memset(pc->nonce, 0, sizeof(pc->nonce));
+    aes_encryption(pc->nonce, pc->cache, pc->prf_key);
+}
+
+static void pdf_gen_xor(pdf_ctx *pc, UINT8 nonce[8], UINT8 buf[8])
+{
+    /* 'ndx' indicates that we'll be using the 0th or 1st eight bytes
+     * of the AES output. If last time around we returned the ndx-1st
+     * element, then we may have the result in the cache already.
+     */
+     
+#if (UMAC_OUTPUT_LEN == 4)
+#define LOW_BIT_MASK 3
+#elif (UMAC_OUTPUT_LEN == 8)
+#define LOW_BIT_MASK 1
+#elif (UMAC_OUTPUT_LEN > 8)
+#define LOW_BIT_MASK 0
+#endif
+
+    UINT8 tmp_nonce_lo[4];
+#if LOW_BIT_MASK != 0
+    int ndx = nonce[7] & LOW_BIT_MASK;
+#endif
+    *(UINT32 *)tmp_nonce_lo = ((UINT32 *)nonce)[1];
+    tmp_nonce_lo[3] &= ~LOW_BIT_MASK; /* zero last bit */
+    
+    if ( (((UINT32 *)tmp_nonce_lo)[0] != ((UINT32 *)pc->nonce)[1]) ||
+         (((UINT32 *)nonce)[0] != ((UINT32 *)pc->nonce)[0]) )
+    {
+        ((UINT32 *)pc->nonce)[0] = ((UINT32 *)nonce)[0];
+        ((UINT32 *)pc->nonce)[1] = ((UINT32 *)tmp_nonce_lo)[0];
+        aes_encryption(pc->nonce, pc->cache, pc->prf_key);
+    }
+    
+#if (UMAC_OUTPUT_LEN == 4)
+    *((UINT32 *)buf) ^= ((UINT32 *)pc->cache)[ndx];
+#elif (UMAC_OUTPUT_LEN == 8)
+    *((UINT64 *)buf) ^= ((UINT64 *)pc->cache)[ndx];
+#elif (UMAC_OUTPUT_LEN == 12)
+    ((UINT64 *)buf)[0] ^= ((UINT64 *)pc->cache)[0];
+    ((UINT32 *)buf)[2] ^= ((UINT32 *)pc->cache)[2];
+#elif (UMAC_OUTPUT_LEN == 16)
+    ((UINT64 *)buf)[0] ^= ((UINT64 *)pc->cache)[0];
+    ((UINT64 *)buf)[1] ^= ((UINT64 *)pc->cache)[1];
+#endif
+}
+
+/* ---------------------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+/* ----- Begin NH Hash Section ------------------------------------------ */
+/* ---------------------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+
+/* The NH-based hash functions used in UMAC are described in the UMAC paper
+ * and specification, both of which can be found at the UMAC website.     
+ * The interface to this implementation has two         
+ * versions, one expects the entire message being hashed to be passed
+ * in a single buffer and returns the hash result immediately. The second
+ * allows the message to be passed in a sequence of buffers. In the          
+ * muliple-buffer interface, the client calls the routine nh_update() as     
+ * many times as necessary. When there is no more data to be fed to the   
+ * hash, the client calls nh_final() which calculates the hash output.    
+ * Before beginning another hash calculation the nh_reset() routine       
+ * must be called. The single-buffer routine, nh(), is equivalent to  
+ * the sequence of calls nh_update() and nh_final(); however it is        
+ * optimized and should be prefered whenever the multiple-buffer interface
+ * is not necessary. When using either interface, it is the client's         
+ * responsability to pass no more than L1_KEY_LEN bytes per hash result.            
+ *                                                                        
+ * The routine nh_init() initializes the nh_ctx data structure and        
+ * must be called once, before any other PDF routine.                     
+ */
+ 
+ /* The "nh_aux" routines do the actual NH hashing work. They
+  * expect buffers to be multiples of L1_PAD_BOUNDARY. These routines
+  * produce output for all STREAMS NH iterations in one call, 
+  * allowing the parallel implementation of the streams.
+  */
+
+#define STREAMS (UMAC_OUTPUT_LEN / 4) /* Number of times hash is applied  */
+#define L1_KEY_LEN         1024     /* Internal key bytes                 */
+#define L1_KEY_SHIFT         16     /* Toeplitz key shift between streams */
+#define L1_PAD_BOUNDARY      32     /* pad message to boundary multiple   */
+#define ALLOC_BOUNDARY       16     /* Keep buffers aligned to this       */
+#define HASH_BUF_BYTES       64     /* nh_aux_hb buffer multiple          */
+
+typedef struct {
+    UINT8  nh_key [L1_KEY_LEN + L1_KEY_SHIFT * (STREAMS - 1)]; /* NH Key */
+    UINT8  data   [HASH_BUF_BYTES];    /* Incomming data buffer           */
+    int next_data_empty;    /* Bookeeping variable for data buffer.       */
+    int bytes_hashed;        /* Bytes (out of L1_KEY_LEN) incorperated.   */
+    UINT64 state[STREAMS];               /* on-line state     */
+} nh_ctx;
+
+
+#if (UMAC_OUTPUT_LEN == 4)
+
+static void nh_aux(void *kp, void *dp, void *hp, UINT32 dlen)
+/* NH hashing primitive. Previous (partial) hash result is loaded and     
+* then stored via hp pointer. The length of the data pointed at by "dp",
+* "dlen", is guaranteed to be divisible by L1_PAD_BOUNDARY (32).  Key
+* is expected to be endian compensated in memory at key setup.    
+*/
+{
+    UINT64 h;
+    UWORD c = dlen / 32;
+    UINT32 *k = (UINT32 *)kp;
+    UINT32 *d = (UINT32 *)dp;
+    UINT32 d0,d1,d2,d3,d4,d5,d6,d7;
+    UINT32 k0,k1,k2,k3,k4,k5,k6,k7;
+    
+    h = *((UINT64 *)hp);
+    do {
+        d0 = LOAD_UINT32_LITTLE(d+0); d1 = LOAD_UINT32_LITTLE(d+1);
+        d2 = LOAD_UINT32_LITTLE(d+2); d3 = LOAD_UINT32_LITTLE(d+3);
+        d4 = LOAD_UINT32_LITTLE(d+4); d5 = LOAD_UINT32_LITTLE(d+5);
+        d6 = LOAD_UINT32_LITTLE(d+6); d7 = LOAD_UINT32_LITTLE(d+7);
+        k0 = *(k+0); k1 = *(k+1); k2 = *(k+2); k3 = *(k+3);
+        k4 = *(k+4); k5 = *(k+5); k6 = *(k+6); k7 = *(k+7);
+        h += MUL64((k0 + d0), (k4 + d4));
+        h += MUL64((k1 + d1), (k5 + d5));
+        h += MUL64((k2 + d2), (k6 + d6));
+        h += MUL64((k3 + d3), (k7 + d7));
+        
+        d += 8;
+        k += 8;
+    } while (--c);
+  *((UINT64 *)hp) = h;
+}
+
+#elif (UMAC_OUTPUT_LEN == 8)
+
+static void nh_aux(void *kp, void *dp, void *hp, UINT32 dlen)
+/* Same as previous nh_aux, but two streams are handled in one pass,
+ * reading and writing 16 bytes of hash-state per call.
+ */
+{
+  UINT64 h1,h2;
+  UWORD c = dlen / 32;
+  UINT32 *k = (UINT32 *)kp;
+  UINT32 *d = (UINT32 *)dp;
+  UINT32 d0,d1,d2,d3,d4,d5,d6,d7;
+  UINT32 k0,k1,k2,k3,k4,k5,k6,k7,
+        k8,k9,k10,k11;
+
+  h1 = *((UINT64 *)hp);
+  h2 = *((UINT64 *)hp + 1);
+  k0 = *(k+0); k1 = *(k+1); k2 = *(k+2); k3 = *(k+3);
+  do {
+    d0 = LOAD_UINT32_LITTLE(d+0); d1 = LOAD_UINT32_LITTLE(d+1);
+    d2 = LOAD_UINT32_LITTLE(d+2); d3 = LOAD_UINT32_LITTLE(d+3);
+    d4 = LOAD_UINT32_LITTLE(d+4); d5 = LOAD_UINT32_LITTLE(d+5);
+    d6 = LOAD_UINT32_LITTLE(d+6); d7 = LOAD_UINT32_LITTLE(d+7);
+    k4 = *(k+4); k5 = *(k+5); k6 = *(k+6); k7 = *(k+7);
+    k8 = *(k+8); k9 = *(k+9); k10 = *(k+10); k11 = *(k+11);
+
+    h1 += MUL64((k0 + d0), (k4 + d4));
+    h2 += MUL64((k4 + d0), (k8 + d4));
+
+    h1 += MUL64((k1 + d1), (k5 + d5));
+    h2 += MUL64((k5 + d1), (k9 + d5));
+
+    h1 += MUL64((k2 + d2), (k6 + d6));
+    h2 += MUL64((k6 + d2), (k10 + d6));
+
+    h1 += MUL64((k3 + d3), (k7 + d7));
+    h2 += MUL64((k7 + d3), (k11 + d7));
+
+    k0 = k8; k1 = k9; k2 = k10; k3 = k11;
+
+    d += 8;
+    k += 8;
+  } while (--c);
+  ((UINT64 *)hp)[0] = h1;
+  ((UINT64 *)hp)[1] = h2;
+}
+
+#elif (UMAC_OUTPUT_LEN == 12)
+
+static void nh_aux(void *kp, void *dp, void *hp, UINT32 dlen)
+/* Same as previous nh_aux, but two streams are handled in one pass,
+ * reading and writing 24 bytes of hash-state per call.
+*/
+{
+    UINT64 h1,h2,h3;
+    UWORD c = dlen / 32;
+    UINT32 *k = (UINT32 *)kp;
+    UINT32 *d = (UINT32 *)dp;
+    UINT32 d0,d1,d2,d3,d4,d5,d6,d7;
+    UINT32 k0,k1,k2,k3,k4,k5,k6,k7,
+        k8,k9,k10,k11,k12,k13,k14,k15;
+    
+    h1 = *((UINT64 *)hp);
+    h2 = *((UINT64 *)hp + 1);
+    h3 = *((UINT64 *)hp + 2);
+    k0 = *(k+0); k1 = *(k+1); k2 = *(k+2); k3 = *(k+3);
+    k4 = *(k+4); k5 = *(k+5); k6 = *(k+6); k7 = *(k+7);
+    do {
+        d0 = LOAD_UINT32_LITTLE(d+0); d1 = LOAD_UINT32_LITTLE(d+1);
+        d2 = LOAD_UINT32_LITTLE(d+2); d3 = LOAD_UINT32_LITTLE(d+3);
+        d4 = LOAD_UINT32_LITTLE(d+4); d5 = LOAD_UINT32_LITTLE(d+5);
+        d6 = LOAD_UINT32_LITTLE(d+6); d7 = LOAD_UINT32_LITTLE(d+7);
+        k8 = *(k+8); k9 = *(k+9); k10 = *(k+10); k11 = *(k+11);
+        k12 = *(k+12); k13 = *(k+13); k14 = *(k+14); k15 = *(k+15);
+        
+        h1 += MUL64((k0 + d0), (k4 + d4));
+        h2 += MUL64((k4 + d0), (k8 + d4));
+        h3 += MUL64((k8 + d0), (k12 + d4));
+        
+        h1 += MUL64((k1 + d1), (k5 + d5));
+        h2 += MUL64((k5 + d1), (k9 + d5));
+        h3 += MUL64((k9 + d1), (k13 + d5));
+        
+        h1 += MUL64((k2 + d2), (k6 + d6));
+        h2 += MUL64((k6 + d2), (k10 + d6));
+        h3 += MUL64((k10 + d2), (k14 + d6));
+        
+        h1 += MUL64((k3 + d3), (k7 + d7));
+        h2 += MUL64((k7 + d3), (k11 + d7));
+        h3 += MUL64((k11 + d3), (k15 + d7));
+        
+        k0 = k8; k1 = k9; k2 = k10; k3 = k11;
+        k4 = k12; k5 = k13; k6 = k14; k7 = k15;
+        
+        d += 8;
+        k += 8;
+    } while (--c);
+    ((UINT64 *)hp)[0] = h1;
+    ((UINT64 *)hp)[1] = h2;
+    ((UINT64 *)hp)[2] = h3;
+}
+
+#elif (UMAC_OUTPUT_LEN == 16)
+
+static void nh_aux(void *kp, void *dp, void *hp, UINT32 dlen)
+/* Same as previous nh_aux, but two streams are handled in one pass,
+ * reading and writing 24 bytes of hash-state per call.
+*/
+{
+    UINT64 h1,h2,h3,h4;
+    UWORD c = dlen / 32;
+    UINT32 *k = (UINT32 *)kp;
+    UINT32 *d = (UINT32 *)dp;
+    UINT32 d0,d1,d2,d3,d4,d5,d6,d7;
+    UINT32 k0,k1,k2,k3,k4,k5,k6,k7,
+        k8,k9,k10,k11,k12,k13,k14,k15,
+        k16,k17,k18,k19;
+    
+    h1 = *((UINT64 *)hp);
+    h2 = *((UINT64 *)hp + 1);
+    h3 = *((UINT64 *)hp + 2);
+    h4 = *((UINT64 *)hp + 3);
+    k0 = *(k+0); k1 = *(k+1); k2 = *(k+2); k3 = *(k+3);
+    k4 = *(k+4); k5 = *(k+5); k6 = *(k+6); k7 = *(k+7);
+    do {
+        d0 = LOAD_UINT32_LITTLE(d+0); d1 = LOAD_UINT32_LITTLE(d+1);
+        d2 = LOAD_UINT32_LITTLE(d+2); d3 = LOAD_UINT32_LITTLE(d+3);
+        d4 = LOAD_UINT32_LITTLE(d+4); d5 = LOAD_UINT32_LITTLE(d+5);
+        d6 = LOAD_UINT32_LITTLE(d+6); d7 = LOAD_UINT32_LITTLE(d+7);
+        k8 = *(k+8); k9 = *(k+9); k10 = *(k+10); k11 = *(k+11);
+        k12 = *(k+12); k13 = *(k+13); k14 = *(k+14); k15 = *(k+15);
+        k16 = *(k+16); k17 = *(k+17); k18 = *(k+18); k19 = *(k+19);
+        
+        h1 += MUL64((k0 + d0), (k4 + d4));
+        h2 += MUL64((k4 + d0), (k8 + d4));
+        h3 += MUL64((k8 + d0), (k12 + d4));
+        h4 += MUL64((k12 + d0), (k16 + d4));
+        
+        h1 += MUL64((k1 + d1), (k5 + d5));
+        h2 += MUL64((k5 + d1), (k9 + d5));
+        h3 += MUL64((k9 + d1), (k13 + d5));
+        h4 += MUL64((k13 + d1), (k17 + d5));
+        
+        h1 += MUL64((k2 + d2), (k6 + d6));
+        h2 += MUL64((k6 + d2), (k10 + d6));
+        h3 += MUL64((k10 + d2), (k14 + d6));
+        h4 += MUL64((k14 + d2), (k18 + d6));
+        
+        h1 += MUL64((k3 + d3), (k7 + d7));
+        h2 += MUL64((k7 + d3), (k11 + d7));
+        h3 += MUL64((k11 + d3), (k15 + d7));
+        h4 += MUL64((k15 + d3), (k19 + d7));
+        
+        k0 = k8; k1 = k9; k2 = k10; k3 = k11;
+        k4 = k12; k5 = k13; k6 = k14; k7 = k15;
+        k8 = k16; k9 = k17; k10 = k18; k11 = k19;
+        
+        d += 8;
+        k += 8;
+    } while (--c);
+    ((UINT64 *)hp)[0] = h1;
+    ((UINT64 *)hp)[1] = h2;
+    ((UINT64 *)hp)[2] = h3;
+    ((UINT64 *)hp)[3] = h4;
+}
+
+/* ---------------------------------------------------------------------- */
+#endif  /* UMAC_OUTPUT_LENGTH */
+/* ---------------------------------------------------------------------- */
+
+
+/* ---------------------------------------------------------------------- */
+
+static void nh_transform(nh_ctx *hc, UINT8 *buf, UINT32 nbytes)
+/* This function is a wrapper for the primitive NH hash functions. It takes
+ * as argument "hc" the current hash context and a buffer which must be a
+ * multiple of L1_PAD_BOUNDARY. The key passed to nh_aux is offset
+ * appropriately according to how much message has been hashed already.
+ */
+{
+    UINT8 *key;
+  
+    key = hc->nh_key + hc->bytes_hashed;
+    nh_aux(key, buf, hc->state, nbytes);
+}
+
+/* ---------------------------------------------------------------------- */
+
+static void endian_convert(void *buf, UWORD bpw, UINT32 num_bytes)
+/* We endian convert the keys on little-endian computers to               */
+/* compensate for the lack of big-endian memory reads during hashing.     */
+{
+    UWORD iters = num_bytes / bpw;
+    if (bpw == 4) {
+        UINT32 *p = (UINT32 *)buf;
+        do {
+            *p = LOAD_UINT32_REVERSED(p);
+            p++;
+        } while (--iters);
+    } else if (bpw == 8) {
+        UINT32 *p = (UINT32 *)buf;
+        UINT32 t;
+        do {
+            t = LOAD_UINT32_REVERSED(p+1);
+            p[1] = LOAD_UINT32_REVERSED(p);
+            p[0] = t;
+            p += 2;
+        } while (--iters);
+    }
+}
+#if (__LITTLE_ENDIAN__)
+#define endian_convert_if_le(x,y,z) endian_convert((x),(y),(z))
+#else
+#define endian_convert_if_le(x,y,z) do{}while(0)  /* Do nothing */
+#endif
+
+/* ---------------------------------------------------------------------- */
+
+static void nh_reset(nh_ctx *hc)
+/* Reset nh_ctx to ready for hashing of new data */
+{
+    hc->bytes_hashed = 0;
+    hc->next_data_empty = 0;
+    hc->state[0] = 0;
+#if (UMAC_OUTPUT_LEN >= 8)
+    hc->state[1] = 0;
+#endif
+#if (UMAC_OUTPUT_LEN >= 12)
+    hc->state[2] = 0;
+#endif
+#if (UMAC_OUTPUT_LEN == 16)
+    hc->state[3] = 0;
+#endif
+
+}
+
+/* ---------------------------------------------------------------------- */
+
+static void nh_init(nh_ctx *hc, aes_int_key prf_key)
+/* Generate nh_key, endian convert and reset to be ready for hashing.   */
+{
+    kdf(hc->nh_key, prf_key, 1, sizeof(hc->nh_key));
+    endian_convert_if_le(hc->nh_key, 4, sizeof(hc->nh_key));
+    nh_reset(hc);
+}
+
+/* ---------------------------------------------------------------------- */
+
+static void nh_update(nh_ctx *hc, UINT8 *buf, UINT32 nbytes)
+/* Incorporate nbytes of data into a nh_ctx, buffer whatever is not an    */
+/* even multiple of HASH_BUF_BYTES.                                       */
+{
+    UINT32 i,j;
+    
+    j = hc->next_data_empty;
+    if ((j + nbytes) >= HASH_BUF_BYTES) {
+        if (j) {
+            i = HASH_BUF_BYTES - j;
+            memcpy(hc->data+j, buf, i);
+            nh_transform(hc,hc->data,HASH_BUF_BYTES);
+            nbytes -= i;
+            buf += i;
+            hc->bytes_hashed += HASH_BUF_BYTES;
+        }
+        if (nbytes >= HASH_BUF_BYTES) {
+            i = nbytes & ~(HASH_BUF_BYTES - 1);
+            nh_transform(hc, buf, i);
+            nbytes -= i;
+            buf += i;
+            hc->bytes_hashed += i;
+        }
+        j = 0;
+    }
+    memcpy(hc->data + j, buf, nbytes);
+    hc->next_data_empty = j + nbytes;
+}
+
+/* ---------------------------------------------------------------------- */
+
+static void zero_pad(UINT8 *p, int nbytes)
+{
+/* Write "nbytes" of zeroes, beginning at "p" */
+    if (nbytes >= (int)sizeof(UWORD)) {
+        while ((ptrdiff_t)p % sizeof(UWORD)) {
+            *p = 0;
+            nbytes--;
+            p++;
+        }
+        while (nbytes >= (int)sizeof(UWORD)) {
+            *(UWORD *)p = 0;
+            nbytes -= sizeof(UWORD);
+            p += sizeof(UWORD);
+        }
+    }
+    while (nbytes) {
+        *p = 0;
+        nbytes--;
+        p++;
+    }
+}
+
+/* ---------------------------------------------------------------------- */
+
+static void nh_final(nh_ctx *hc, UINT8 *result)
+/* After passing some number of data buffers to nh_update() for integration
+ * into an NH context, nh_final is called to produce a hash result. If any
+ * bytes are in the buffer hc->data, incorporate them into the
+ * NH context. Finally, add into the NH accumulation "state" the total number
+ * of bits hashed. The resulting numbers are written to the buffer "result".
+ * If nh_update was never called, L1_PAD_BOUNDARY zeroes are incorporated.
+ */
+{
+    int nh_len, nbits;
+
+    if (hc->next_data_empty != 0) {
+        nh_len = ((hc->next_data_empty + (L1_PAD_BOUNDARY - 1)) &
+                                                ~(L1_PAD_BOUNDARY - 1));
+        zero_pad(hc->data + hc->next_data_empty, 
+                                          nh_len - hc->next_data_empty);
+        nh_transform(hc, hc->data, nh_len);
+        hc->bytes_hashed += hc->next_data_empty;
+    } else if (hc->bytes_hashed == 0) {
+    	nh_len = L1_PAD_BOUNDARY;
+        zero_pad(hc->data, L1_PAD_BOUNDARY);
+        nh_transform(hc, hc->data, nh_len);
+    }
+
+    nbits = (hc->bytes_hashed << 3);
+    ((UINT64 *)result)[0] = ((UINT64 *)hc->state)[0] + nbits;
+#if (UMAC_OUTPUT_LEN >= 8)
+    ((UINT64 *)result)[1] = ((UINT64 *)hc->state)[1] + nbits;
+#endif
+#if (UMAC_OUTPUT_LEN >= 12)
+    ((UINT64 *)result)[2] = ((UINT64 *)hc->state)[2] + nbits;
+#endif
+#if (UMAC_OUTPUT_LEN == 16)
+    ((UINT64 *)result)[3] = ((UINT64 *)hc->state)[3] + nbits;
+#endif
+    nh_reset(hc);
+}
+
+/* ---------------------------------------------------------------------- */
+
+static void nh(nh_ctx *hc, UINT8 *buf, UINT32 padded_len,
+               UINT32 unpadded_len, UINT8 *result)
+/* All-in-one nh_update() and nh_final() equivalent.
+ * Assumes that padded_len is divisible by L1_PAD_BOUNDARY and result is
+ * well aligned
+ */
+{
+    UINT32 nbits;
+    
+    /* Initialize the hash state */
+    nbits = (unpadded_len << 3);
+    
+    ((UINT64 *)result)[0] = nbits;
+#if (UMAC_OUTPUT_LEN >= 8)
+    ((UINT64 *)result)[1] = nbits;
+#endif
+#if (UMAC_OUTPUT_LEN >= 12)
+    ((UINT64 *)result)[2] = nbits;
+#endif
+#if (UMAC_OUTPUT_LEN == 16)
+    ((UINT64 *)result)[3] = nbits;
+#endif
+    
+    nh_aux(hc->nh_key, buf, result, padded_len);
+}
+
+/* ---------------------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+/* ----- Begin UHASH Section -------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+
+/* UHASH is a multi-layered algorithm. Data presented to UHASH is first
+ * hashed by NH. The NH output is then hashed by a polynomial-hash layer
+ * unless the initial data to be hashed is short. After the polynomial-
+ * layer, an inner-product hash is used to produce the final UHASH output.
+ *
+ * UHASH provides two interfaces, one all-at-once and another where data
+ * buffers are presented sequentially. In the sequential interface, the
+ * UHASH client calls the routine uhash_update() as many times as necessary.
+ * When there is no more data to be fed to UHASH, the client calls
+ * uhash_final() which          
+ * calculates the UHASH output. Before beginning another UHASH calculation    
+ * the uhash_reset() routine must be called. The all-at-once UHASH routine,   
+ * uhash(), is equivalent to the sequence of calls uhash_update() and         
+ * uhash_final(); however it is optimized and should be                     
+ * used whenever the sequential interface is not necessary.              
+ *                                                                        
+ * The routine uhash_init() initializes the uhash_ctx data structure and    
+ * must be called once, before any other UHASH routine.
+ */                                                        
+
+/* ---------------------------------------------------------------------- */
+/* ----- Constants and uhash_ctx ---------------------------------------- */
+/* ---------------------------------------------------------------------- */
+
+/* ---------------------------------------------------------------------- */
+/* ----- Poly hash and Inner-Product hash Constants --------------------- */
+/* ---------------------------------------------------------------------- */
+
+/* Primes and masks */
+#define p36    ((UINT64)0x0000000FFFFFFFFBull)              /* 2^36 -  5 */
+#define p64    ((UINT64)0xFFFFFFFFFFFFFFC5ull)              /* 2^64 - 59 */
+#define m36    ((UINT64)0x0000000FFFFFFFFFull)  /* The low 36 of 64 bits */
+
+
+/* ---------------------------------------------------------------------- */
+
+typedef struct uhash_ctx {
+    nh_ctx hash;                          /* Hash context for L1 NH hash  */
+    UINT64 poly_key_8[STREAMS];           /* p64 poly keys                */
+    UINT64 poly_accum[STREAMS];           /* poly hash result             */
+    UINT64 ip_keys[STREAMS*4];            /* Inner-product keys           */
+    UINT32 ip_trans[STREAMS];             /* Inner-product translation    */
+    UINT32 msg_len;                       /* Total length of data passed  */
+                                          /* to uhash */
+} uhash_ctx;
+typedef struct uhash_ctx *uhash_ctx_t;
+
+/* ---------------------------------------------------------------------- */
+
+
+/* The polynomial hashes use Horner's rule to evaluate a polynomial one
+ * word at a time. As described in the specification, poly32 and poly64
+ * require keys from special domains. The following implementations exploit
+ * the special domains to avoid overflow. The results are not guaranteed to
+ * be within Z_p32 and Z_p64, but the Inner-Product hash implementation
+ * patches any errant values.
+ */
+
+static UINT64 poly64(UINT64 cur, UINT64 key, UINT64 data)
+{
+    UINT32 key_hi = (UINT32)(key >> 32),
+           key_lo = (UINT32)key,
+           cur_hi = (UINT32)(cur >> 32),
+           cur_lo = (UINT32)cur,
+           x_lo,
+           x_hi;
+    UINT64 X,T,res;
+    
+    X =  MUL64(key_hi, cur_lo) + MUL64(cur_hi, key_lo);
+    x_lo = (UINT32)X;
+    x_hi = (UINT32)(X >> 32);
+    
+    res = (MUL64(key_hi, cur_hi) + x_hi) * 59 + MUL64(key_lo, cur_lo);
+     
+    T = ((UINT64)x_lo << 32);
+    res += T;
+    if (res < T)
+        res += 59;
+
+    res += data;
+    if (res < data)
+        res += 59;
+
+    return res;
+}
+
+
+/* Although UMAC is specified to use a ramped polynomial hash scheme, this
+ * implementation does not handle all ramp levels. Because we don't handle
+ * the ramp up to p128 modulus in this implementation, we are limited to
+ * 2^14 poly_hash() invocations per stream (for a total capacity of 2^24
+ * bytes input to UMAC per tag, ie. 16MB).
+ */
+static void poly_hash(uhash_ctx_t hc, UINT32 data_in[])
+{
+    int i;
+    UINT64 *data=(UINT64*)data_in;
+    
+    for (i = 0; i < STREAMS; i++) {
+        if ((UINT32)(data[i] >> 32) == 0xfffffffful) {
+            hc->poly_accum[i] = poly64(hc->poly_accum[i], 
+                                       hc->poly_key_8[i], p64 - 1);
+            hc->poly_accum[i] = poly64(hc->poly_accum[i],
+                                       hc->poly_key_8[i], (data[i] - 59));
+        } else {
+            hc->poly_accum[i] = poly64(hc->poly_accum[i],
+                                       hc->poly_key_8[i], data[i]);
+        }
+    }
+}
+
+
+/* ---------------------------------------------------------------------- */
+
+
+/* The final step in UHASH is an inner-product hash. The poly hash
+ * produces a result not neccesarily WORD_LEN bytes long. The inner-
+ * product hash breaks the polyhash output into 16-bit chunks and
+ * multiplies each with a 36 bit key.
+ */
+
+static UINT64 ip_aux(UINT64 t, UINT64 *ipkp, UINT64 data)
+{
+    t = t + ipkp[0] * (UINT64)(UINT16)(data >> 48);
+    t = t + ipkp[1] * (UINT64)(UINT16)(data >> 32);
+    t = t + ipkp[2] * (UINT64)(UINT16)(data >> 16);
+    t = t + ipkp[3] * (UINT64)(UINT16)(data);
+    
+    return t;
+}
+
+static UINT32 ip_reduce_p36(UINT64 t)
+{
+/* Divisionless modular reduction */
+    UINT64 ret;
+    
+    ret = (t & m36) + 5 * (t >> 36);
+    if (ret >= p36)
+        ret -= p36;
+
+    /* return least significant 32 bits */
+    return (UINT32)(ret);
+}
+
+
+/* If the data being hashed by UHASH is no longer than L1_KEY_LEN, then
+ * the polyhash stage is skipped and ip_short is applied directly to the
+ * NH output.
+ */
+static void ip_short(uhash_ctx_t ahc, UINT8 *nh_res, u_char *res)
+{
+    UINT64 t;
+    UINT64 *nhp = (UINT64 *)nh_res;
+    
+    t  = ip_aux(0,ahc->ip_keys, nhp[0]);
+    STORE_UINT32_BIG((UINT32 *)res+0, ip_reduce_p36(t) ^ ahc->ip_trans[0]);
+#if (UMAC_OUTPUT_LEN >= 8)
+    t  = ip_aux(0,ahc->ip_keys+4, nhp[1]);
+    STORE_UINT32_BIG((UINT32 *)res+1, ip_reduce_p36(t) ^ ahc->ip_trans[1]);
+#endif
+#if (UMAC_OUTPUT_LEN >= 12)
+    t  = ip_aux(0,ahc->ip_keys+8, nhp[2]);
+    STORE_UINT32_BIG((UINT32 *)res+2, ip_reduce_p36(t) ^ ahc->ip_trans[2]);
+#endif
+#if (UMAC_OUTPUT_LEN == 16)
+    t  = ip_aux(0,ahc->ip_keys+12, nhp[3]);
+    STORE_UINT32_BIG((UINT32 *)res+3, ip_reduce_p36(t) ^ ahc->ip_trans[3]);
+#endif
+}
+
+/* If the data being hashed by UHASH is longer than L1_KEY_LEN, then
+ * the polyhash stage is not skipped and ip_long is applied to the
+ * polyhash output.
+ */
+static void ip_long(uhash_ctx_t ahc, u_char *res)
+{
+    int i;
+    UINT64 t;
+
+    for (i = 0; i < STREAMS; i++) {
+        /* fix polyhash output not in Z_p64 */
+        if (ahc->poly_accum[i] >= p64)
+            ahc->poly_accum[i] -= p64;
+        t  = ip_aux(0,ahc->ip_keys+(i*4), ahc->poly_accum[i]);
+        STORE_UINT32_BIG((UINT32 *)res+i, 
+                         ip_reduce_p36(t) ^ ahc->ip_trans[i]);
+    }
+}
+
+
+/* ---------------------------------------------------------------------- */
+
+/* ---------------------------------------------------------------------- */
+
+/* Reset uhash context for next hash session */
+static int uhash_reset(uhash_ctx_t pc)
+{
+    nh_reset(&pc->hash);
+    pc->msg_len = 0;
+    pc->poly_accum[0] = 1;
+#if (UMAC_OUTPUT_LEN >= 8)
+    pc->poly_accum[1] = 1;
+#endif
+#if (UMAC_OUTPUT_LEN >= 12)
+    pc->poly_accum[2] = 1;
+#endif
+#if (UMAC_OUTPUT_LEN == 16)
+    pc->poly_accum[3] = 1;
+#endif
+    return 1;
+}
+
+/* ---------------------------------------------------------------------- */
+
+/* Given a pointer to the internal key needed by kdf() and a uhash context,
+ * initialize the NH context and generate keys needed for poly and inner-
+ * product hashing. All keys are endian adjusted in memory so that native
+ * loads cause correct keys to be in registers during calculation.
+ */
+static void uhash_init(uhash_ctx_t ahc, aes_int_key prf_key)
+{
+    int i;
+    UINT8 buf[(8*STREAMS+4)*sizeof(UINT64)];
+    
+    /* Zero the entire uhash context */
+    memset(ahc, 0, sizeof(uhash_ctx));
+
+    /* Initialize the L1 hash */
+    nh_init(&ahc->hash, prf_key);
+    
+    /* Setup L2 hash variables */
+    kdf(buf, prf_key, 2, sizeof(buf));    /* Fill buffer with index 1 key */
+    for (i = 0; i < STREAMS; i++) {
+        /* Fill keys from the buffer, skipping bytes in the buffer not
+         * used by this implementation. Endian reverse the keys if on a
+         * little-endian computer.
+         */
+        memcpy(ahc->poly_key_8+i, buf+24*i, 8);
+        endian_convert_if_le(ahc->poly_key_8+i, 8, 8);
+        /* Mask the 64-bit keys to their special domain */
+        ahc->poly_key_8[i] &= ((UINT64)0x01ffffffu << 32) + 0x01ffffffu;
+        ahc->poly_accum[i] = 1;  /* Our polyhash prepends a non-zero word */
+    }
+    
+    /* Setup L3-1 hash variables */
+    kdf(buf, prf_key, 3, sizeof(buf)); /* Fill buffer with index 2 key */
+    for (i = 0; i < STREAMS; i++)
+          memcpy(ahc->ip_keys+4*i, buf+(8*i+4)*sizeof(UINT64),
+                                                 4*sizeof(UINT64));
+    endian_convert_if_le(ahc->ip_keys, sizeof(UINT64), 
+                                                  sizeof(ahc->ip_keys));
+    for (i = 0; i < STREAMS*4; i++)
+        ahc->ip_keys[i] %= p36;  /* Bring into Z_p36 */
+    
+    /* Setup L3-2 hash variables    */
+    /* Fill buffer with index 4 key */
+    kdf(ahc->ip_trans, prf_key, 4, STREAMS * sizeof(UINT32));
+    endian_convert_if_le(ahc->ip_trans, sizeof(UINT32),
+                         STREAMS * sizeof(UINT32));
+}
+
+/* ---------------------------------------------------------------------- */
+
+#if 0
+static uhash_ctx_t uhash_alloc(u_char key[])
+{
+/* Allocate memory and force to a 16-byte boundary. */
+    uhash_ctx_t ctx;
+    u_char bytes_to_add;
+    aes_int_key prf_key;
+    
+    ctx = (uhash_ctx_t)malloc(sizeof(uhash_ctx)+ALLOC_BOUNDARY);
+    if (ctx) {
+        if (ALLOC_BOUNDARY) {
+            bytes_to_add = ALLOC_BOUNDARY -
+                              ((ptrdiff_t)ctx & (ALLOC_BOUNDARY -1));
+            ctx = (uhash_ctx_t)((u_char *)ctx + bytes_to_add);
+            *((u_char *)ctx - 1) = bytes_to_add;
+        }
+        aes_key_setup(key,prf_key);
+        uhash_init(ctx, prf_key);
+    }
+    return (ctx);
+}
+#endif
+
+/* ---------------------------------------------------------------------- */
+
+#if 0
+static int uhash_free(uhash_ctx_t ctx)
+{
+/* Free memory allocated by uhash_alloc */
+    u_char bytes_to_sub;
+    
+    if (ctx) {
+        if (ALLOC_BOUNDARY) {
+            bytes_to_sub = *((u_char *)ctx - 1);
+            ctx = (uhash_ctx_t)((u_char *)ctx - bytes_to_sub);
+        }
+        free(ctx);
+    }
+    return (1);
+}
+#endif
+/* ---------------------------------------------------------------------- */
+
+static int uhash_update(uhash_ctx_t ctx, u_char *input, long len)
+/* Given len bytes of data, we parse it into L1_KEY_LEN chunks and
+ * hash each one with NH, calling the polyhash on each NH output.
+ */
+{
+    UWORD bytes_hashed, bytes_remaining;
+    UINT8 nh_result[STREAMS*sizeof(UINT64)];
+    
+    if (ctx->msg_len + len <= L1_KEY_LEN) {
+        nh_update(&ctx->hash, (UINT8 *)input, len);
+        ctx->msg_len += len;
+    } else {
+    
+         bytes_hashed = ctx->msg_len % L1_KEY_LEN;
+         if (ctx->msg_len == L1_KEY_LEN)
+             bytes_hashed = L1_KEY_LEN;
+
+         if (bytes_hashed + len >= L1_KEY_LEN) {
+
+             /* If some bytes have been passed to the hash function      */
+             /* then we want to pass at most (L1_KEY_LEN - bytes_hashed) */
+             /* bytes to complete the current nh_block.                  */
+             if (bytes_hashed) {
+                 bytes_remaining = (L1_KEY_LEN - bytes_hashed);
+                 nh_update(&ctx->hash, (UINT8 *)input, bytes_remaining);
+                 nh_final(&ctx->hash, nh_result);
+                 ctx->msg_len += bytes_remaining;
+                 poly_hash(ctx,(UINT32 *)nh_result);
+                 len -= bytes_remaining;
+                 input += bytes_remaining;
+             }
+
+             /* Hash directly from input stream if enough bytes */
+             while (len >= L1_KEY_LEN) {
+                 nh(&ctx->hash, (UINT8 *)input, L1_KEY_LEN,
+                                   L1_KEY_LEN, nh_result);
+                 ctx->msg_len += L1_KEY_LEN;
+                 len -= L1_KEY_LEN;
+                 input += L1_KEY_LEN;
+                 poly_hash(ctx,(UINT32 *)nh_result);
+             }
+         }
+
+         /* pass remaining < L1_KEY_LEN bytes of input data to NH */
+         if (len) {
+             nh_update(&ctx->hash, (UINT8 *)input, len);
+             ctx->msg_len += len;
+         }
+     }
+
+    return (1);
+}
+
+/* ---------------------------------------------------------------------- */
+
+static int uhash_final(uhash_ctx_t ctx, u_char *res)
+/* Incorporate any pending data, pad, and generate tag */
+{
+    UINT8 nh_result[STREAMS*sizeof(UINT64)];
+
+    if (ctx->msg_len > L1_KEY_LEN) {
+        if (ctx->msg_len % L1_KEY_LEN) {
+            nh_final(&ctx->hash, nh_result);
+            poly_hash(ctx,(UINT32 *)nh_result);
+        }
+        ip_long(ctx, res);
+    } else {
+        nh_final(&ctx->hash, nh_result);
+        ip_short(ctx,nh_result, res);
+    }
+    uhash_reset(ctx);
+    return (1);
+}
+
+/* ---------------------------------------------------------------------- */
+
+#if 0
+static int uhash(uhash_ctx_t ahc, u_char *msg, long len, u_char *res)
+/* assumes that msg is in a writable buffer of length divisible by */
+/* L1_PAD_BOUNDARY. Bytes beyond msg[len] may be zeroed.           */
+{
+    UINT8 nh_result[STREAMS*sizeof(UINT64)];
+    UINT32 nh_len;
+    int extra_zeroes_needed;
+        
+    /* If the message to be hashed is no longer than L1_HASH_LEN, we skip
+     * the polyhash.
+     */
+    if (len <= L1_KEY_LEN) {
+    	if (len == 0)                  /* If zero length messages will not */
+    		nh_len = L1_PAD_BOUNDARY;  /* be seen, comment out this case   */ 
+    	else
+        	nh_len = ((len + (L1_PAD_BOUNDARY - 1)) & ~(L1_PAD_BOUNDARY - 1));
+        extra_zeroes_needed = nh_len - len;
+        zero_pad((UINT8 *)msg + len, extra_zeroes_needed);
+        nh(&ahc->hash, (UINT8 *)msg, nh_len, len, nh_result);
+        ip_short(ahc,nh_result, res);
+    } else {
+        /* Otherwise, we hash each L1_KEY_LEN chunk with NH, passing the NH
+         * output to poly_hash().
+         */
+        do {
+            nh(&ahc->hash, (UINT8 *)msg, L1_KEY_LEN, L1_KEY_LEN, nh_result);
+            poly_hash(ahc,(UINT32 *)nh_result);
+            len -= L1_KEY_LEN;
+            msg += L1_KEY_LEN;
+        } while (len >= L1_KEY_LEN);
+        if (len) {
+            nh_len = ((len + (L1_PAD_BOUNDARY - 1)) & ~(L1_PAD_BOUNDARY - 1));
+            extra_zeroes_needed = nh_len - len;
+            zero_pad((UINT8 *)msg + len, extra_zeroes_needed);
+            nh(&ahc->hash, (UINT8 *)msg, nh_len, len, nh_result);
+            poly_hash(ahc,(UINT32 *)nh_result);
+        }
+
+        ip_long(ahc, res);
+    }
+    
+    uhash_reset(ahc);
+    return 1;
+}
+#endif
+
+/* ---------------------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+/* ----- Begin UMAC Section --------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+
+/* The UMAC interface has two interfaces, an all-at-once interface where
+ * the entire message to be authenticated is passed to UMAC in one buffer,
+ * and a sequential interface where the message is presented a little at a   
+ * time. The all-at-once is more optimaized than the sequential version and
+ * should be preferred when the sequential interface is not required. 
+ */
+struct umac_ctx {
+    uhash_ctx hash;          /* Hash function for message compression    */
+    pdf_ctx pdf;             /* PDF for hashed output                    */
+    void *free_ptr;          /* Address to free this struct via          */
+} umac_ctx;
+
+/* ---------------------------------------------------------------------- */
+
+#if 0
+int umac_reset(struct umac_ctx *ctx)
+/* Reset the hash function to begin a new authentication.        */
+{
+    uhash_reset(&ctx->hash);
+    return (1);
+}
+#endif
+
+/* ---------------------------------------------------------------------- */
+
+int umac_delete(struct umac_ctx *ctx)
+/* Deallocate the ctx structure */
+{
+    if (ctx) {
+        if (ALLOC_BOUNDARY)
+            ctx = (struct umac_ctx *)ctx->free_ptr;
+        free(ctx);
+    }
+    return (1);
+}
+
+/* ---------------------------------------------------------------------- */
+
+struct umac_ctx *umac_new(u_char key[])
+/* Dynamically allocate a umac_ctx struct, initialize variables, 
+ * generate subkeys from key. Align to 16-byte boundary.
+ */
+{
+    struct umac_ctx *ctx, *octx;
+    size_t bytes_to_add;
+    aes_int_key prf_key;
+    
+    octx = ctx = malloc(sizeof(*ctx) + ALLOC_BOUNDARY);
+    if (ctx) {
+        if (ALLOC_BOUNDARY) {
+            bytes_to_add = ALLOC_BOUNDARY -
+                              ((ptrdiff_t)ctx & (ALLOC_BOUNDARY - 1));
+            ctx = (struct umac_ctx *)((u_char *)ctx + bytes_to_add);
+        }
+        ctx->free_ptr = octx;
+        aes_key_setup(key,prf_key);
+        pdf_init(&ctx->pdf, prf_key);
+        uhash_init(&ctx->hash, prf_key);
+    }
+        
+    return (ctx);
+}
+
+/* ---------------------------------------------------------------------- */
+
+int umac_final(struct umac_ctx *ctx, u_char tag[], u_char nonce[8])
+/* Incorporate any pending data, pad, and generate tag */
+{
+    uhash_final(&ctx->hash, (u_char *)tag);
+    pdf_gen_xor(&ctx->pdf, (UINT8 *)nonce, (UINT8 *)tag);
+    
+    return (1);
+}
+
+/* ---------------------------------------------------------------------- */
+
+int umac_update(struct umac_ctx *ctx, u_char *input, long len)
+/* Given len bytes of data, we parse it into L1_KEY_LEN chunks and   */
+/* hash each one, calling the PDF on the hashed output whenever the hash- */
+/* output buffer is full.                                                 */
+{
+    uhash_update(&ctx->hash, input, len);
+    return (1);
+}
+
+/* ---------------------------------------------------------------------- */
+
+#if 0
+int umac(struct umac_ctx *ctx, u_char *input, 
+         long len, u_char tag[],
+         u_char nonce[8])
+/* All-in-one version simply calls umac_update() and umac_final().        */
+{
+    uhash(&ctx->hash, input, len, (u_char *)tag);
+    pdf_gen_xor(&ctx->pdf, (UINT8 *)nonce, (UINT8 *)tag);
+    
+    return (1);
+}
+#endif
+
+/* ---------------------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+/* ----- End UMAC Section ----------------------------------------------- */
+/* ---------------------------------------------------------------------- */
+/* ---------------------------------------------------------------------- */
diff --git a/umac.h b/umac.h
new file mode 100644
index 00000000..055c705f
--- /dev/null
+++ b/umac.h
@@ -0,0 +1,123 @@
+/* $OpenBSD: umac.h,v 1.1 2007/06/07 19:37:34 pvalchev Exp $ */
+/* -----------------------------------------------------------------------
+ * 
+ * umac.h -- C Implementation UMAC Message Authentication
+ *
+ * Version 0.93a of rfc4418.txt -- 2006 July 14
+ *
+ * For a full description of UMAC message authentication see the UMAC
+ * world-wide-web page at http://www.cs.ucdavis.edu/~rogaway/umac
+ * Please report bugs and suggestions to the UMAC webpage.
+ *
+ * Copyright (c) 1999-2004 Ted Krovetz
+ *                                                                 
+ * Permission to use, copy, modify, and distribute this software and
+ * its documentation for any purpose and with or without fee, is hereby
+ * granted provided that the above copyright notice appears in all copies
+ * and in supporting documentation, and that the name of the copyright
+ * holder not be used in advertising or publicity pertaining to
+ * distribution of the software without specific, written prior permission.
+ *
+ * Comments should be directed to Ted Krovetz (tdk@acm.org)                                        
+ *                                                                   
+ * ---------------------------------------------------------------------- */
+ 
+ /* ////////////////////// IMPORTANT NOTES /////////////////////////////////
+  *
+  * 1) This version does not work properly on messages larger than 16MB
+  *
+  * 2) If you set the switch to use SSE2, then all data must be 16-byte
+  *    aligned
+  *
+  * 3) When calling the function umac(), it is assumed that msg is in
+  * a writable buffer of length divisible by 32 bytes. The message itself
+  * does not have to fill the entire buffer, but bytes beyond msg may be
+  * zeroed.
+  *
+  * 4) Two free AES implementations are supported by this implementation of
+  * UMAC. Paulo Barreto's version is in the public domain and can be found
+  * at http://www.esat.kuleuven.ac.be/~rijmen/rijndael/ (search for
+  * "Barreto"). The only two files needed are rijndael-alg-fst.c and
+  * rijndael-alg-fst.h.
+  * Brian Gladman's version is distributed with GNU Public lisence
+  * and can be found at http://fp.gladman.plus.com/AES/index.htm. It
+  * includes a fast IA-32 assembly version.
+  *
+  /////////////////////////////////////////////////////////////////////// */
+#ifndef HEADER_UMAC_H
+#define HEADER_UMAC_H
+
+
+#ifdef __cplusplus
+    extern "C" {
+#endif
+
+struct umac_ctx *umac_new(u_char key[]);
+/* Dynamically allocate a umac_ctx struct, initialize variables, 
+ * generate subkeys from key.
+ */
+
+#if 0
+int umac_reset(struct umac_ctx *ctx);
+/* Reset a umac_ctx to begin authenicating a new message */
+#endif
+
+int umac_update(struct umac_ctx *ctx, u_char *input, long len);
+/* Incorporate len bytes pointed to by input into context ctx */
+
+int umac_final(struct umac_ctx *ctx, u_char tag[], u_char nonce[8]);
+/* Incorporate any pending data and the ctr value, and return tag. 
+ * This function returns error code if ctr < 0. 
+ */
+
+int umac_delete(struct umac_ctx *ctx);
+/* Deallocate the context structure */
+
+#if 0
+int umac(struct umac_ctx *ctx, u_char *input, 
+         long len, u_char tag[],
+         u_char nonce[8]);
+/* All-in-one implementation of the functions Reset, Update and Final */
+#endif
+
+/* uhash.h */
+
+
+#if 0
+typedef struct uhash_ctx *uhash_ctx_t;
+  /* The uhash_ctx structure is defined by the implementation of the    */
+  /* UHASH functions.                                                   */
+ 
+uhash_ctx_t uhash_alloc(u_char key[16]);
+  /* Dynamically allocate a uhash_ctx struct and generate subkeys using */
+  /* the kdf and kdf_key passed in. If kdf_key_len is 0 then RC6 is     */
+  /* used to generate key with a fixed key. If kdf_key_len > 0 but kdf  */
+  /* is NULL then the first 16 bytes pointed at by kdf_key is used as a */
+  /* key for an RC6 based KDF.                                          */
+  
+int uhash_free(uhash_ctx_t ctx);
+
+int uhash_set_params(uhash_ctx_t ctx,
+                   void       *params);
+
+int uhash_reset(uhash_ctx_t ctx);
+
+int uhash_update(uhash_ctx_t ctx,
+               u_char       *input,
+               long        len);
+
+int uhash_final(uhash_ctx_t ctx,
+              u_char        ouput[]);
+
+int uhash(uhash_ctx_t ctx,
+        u_char       *input,
+        long        len,
+        u_char        output[]);
+
+#endif
+
+#ifdef __cplusplus
+    }
+#endif
+
+#endif /* HEADER_UMAC_H */