diff options
Diffstat (limited to 'mozilla/security/nss/tests/libpkix/common/libpkix_init.sh')
| -rw-r--r-- | mozilla/security/nss/tests/libpkix/common/libpkix_init.sh | 357 |
1 files changed, 357 insertions, 0 deletions
diff --git a/mozilla/security/nss/tests/libpkix/common/libpkix_init.sh b/mozilla/security/nss/tests/libpkix/common/libpkix_init.sh new file mode 100644 index 0000000..8dc800a --- /dev/null +++ b/mozilla/security/nss/tests/libpkix/common/libpkix_init.sh @@ -0,0 +1,357 @@ +#!/bin/sh +# +# ***** BEGIN LICENSE BLOCK ***** +# Version: MPL 1.1/GPL 2.0/LGPL 2.1 +# +# The contents of this file are subject to the Mozilla Public License Version +# 1.1 (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# http://www.mozilla.org/MPL/ +# +# Software distributed under the License is distributed on an "AS IS" basis, +# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License +# for the specific language governing rights and limitations under the +# License. +# +# The Original Code is the PKIX-C library. +# +# The Initial Developer of the Original Code is +# Sun Microsystems, Inc. +# Portions created by the Initial Developer are +# Copyright 2004-2007 Sun Microsystems, Inc. All Rights Reserved. +# +# Contributor(s): +# Sun Microsystems, Inc. +# +# Alternatively, the contents of this file may be used under the terms of +# either the GNU General Public License Version 2 or later (the "GPL"), or +# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), +# in which case the provisions of the GPL or the LGPL are applicable instead +# of those above. If you wish to allow use of your version of this file only +# under the terms of either the GPL or the LGPL, and not to allow others to +# use your version of this file under the terms of the MPL, indicate your +# decision by deleting the provisions above and replace them with the notice +# and other provisions required by the GPL or the LGPL. If you do not delete +# the provisions above, a recipient may use your version of this file under +# the terms of any one of the MPL, the GPL or the LGPL. +# +# ***** END LICENSE BLOCK ***** +# +# libpkix_init.sh +# + +### when the script is exiting, handle it in the Cleanup routine...the result +### value will get set to 0 if all the tests completed successfully, so we can +### use that value in the handler + +trap 'Cleanup' EXIT + +result=1 +checkmem=0 +arenas=0 +quiet=0 + +doNIST=1 +doNIST_PDTest=0 +doPD=0 +doTop=0 +doModule=0 +doPki=0 +doOCSP=0 +doOCSPTest=0 + +combinedErrors=0 +totalErrors=0 +prematureTermination=0 +errors=0 + +if [ -z "${INIT_SOURCED}" ] ; then + libpkixCommondir=`pwd` + cd ../../common + . ./init.sh > /dev/null + cd ${libpkixCommondir} +fi + +DIST_BIN=${DIST}/${OBJDIR}/bin + +### setup some defaults +WD=`pwd` +prog=`basename $0` +testOut=${HOSTDIR}/${prog}.$$ +testOutMem=${HOSTDIR}/${prog}_mem.$$ + +#################### +# cleanup from tests +#################### +Cleanup() +{ + if [ ${testOut} != "" ]; then + rm -f ${testOut} + fi + + if [ ${testOutMem} != "" ]; then + rm -f ${testOutMem} + fi + + if [ -d ../../nist_pkits/certs ]; then + rm -f ../../nist_pkits/certs + fi + + if [ ${doTop} -eq 1 ]; then + for i in ${linkMStoreNistFiles}; do + if [ -f ${HOSTDIR}/rev_data/multiple_certstores/$i ]; then + rm -f ${HOSTDIR}/rev_data/multiple_certstores/$i + fi + done + if [ -d ${HOSTDIR}/rev_data/multiple_certstores ]; then + rm -fr ${HOSTDIR}/rev_data/multiple_certstores + fi + fi + + if [ ${doModule} -eq 1 ]; then + for i in ${linkModuleNistFiles}; do + if [ -f ${HOSTDIR}/rev_data/local/$i ]; then + rm -f ${HOSTDIR}/rev_data/local/$i + fi + done + for i in ${localCRLFiles}; do + if [ -f ${HOSTDIR}/rev_data/local/$i ]; then + rm -f ${HOSTDIR}/rev_data/local/$i + fi + done + fi + + if [ ${doPki} -eq 1 ]; then + for i in ${linkPkiNistFiles}; do + if [ -f ${HOSTDIR}/rev_data/local/$i ]; then + rm -f ${HOSTDIR}/rev_data/local/$i + fi + done + fi + + return ${result} +} + +### ParseArgs +ParseArgs() # args +{ + while [ $# -gt 0 ]; do + if [ $1 = "-checkmem" ]; then + checkmem=1 + elif [ $1 = "-quiet" ]; then + quiet=1 + elif [ $1 = "-arenas" ]; then + arenas=1 + fi + shift + done +} + +Display() # string +{ + if [ ${quiet} -eq 0 ]; then + echo "$1" + fi +} + +testHeadingEcho() +{ + echo "*******************************************************************************" + echo "START OF TESTS FOR ${testunit}${memText}" + echo "*******************************************************************************" + echo "" +} + +testEndingEcho() +{ + if [ ${totalErrors} -eq 0 ]; then + echo "" + echo "************************************************************" + echo "END OF TESTS FOR ${testunit}: ALL TESTS COMPLETED SUCCESSFULLY" + echo "************************************************************" + echo "" + return 0 + fi + + if [ ${totalErrors} -eq 1 ]; then + plural="" + else + plural="S" + fi + + echo "" + echo "************************************************************" + echo "END OF TESTS FOR ${testunit}: ${totalErrors} TEST${plural} FAILED" + echo "************************************************************" + echo "" + return ${totalErrors} +} + +########### +# RunTests +########### +RunTests() +{ + errors=0 + memErrors=0 + prematureErrors=0 + + failedpgms="" + failedmempgms="" + failedprematurepgms="" + memText="" + arenaCmd="" + + if [ ${checkmem} -eq 1 ]; then + memText=" (Memory Checking Enabled)" + fi + + if [ ${arenas} -eq 1 ]; then + arenaCmd="-arenas" + fi + + # + # Announce start of tests + # + Display "*******************************************************************************" + Display "START OF TESTS FOR PKIX ${testunit} ${memText}" + Display "*******************************************************************************" + Display "" + + # run each test specified by the input redirection below + + while read testPgm args; do + + shortTestPurpose=`echo $args | awk '{print $1 " " $2 " "}'` + fullTestPurpose=${args} + if [ ${doTop} -eq 1 -o ${doModule} -eq 1 -o ${doPki} -eq 1 ]; then + testPurpose=${shortTestPurpose} + else + testPurpose=${fullTestPurpose} + fi + + # If we want shorter command printout for NIST tests, delete next line + testPurpose=${fullTestPurpose} + + # Skip OCSP tests if OCSP is not defined in the environment + if [ ${doOCSPTest} -eq 0 ]; then + hasOCSP=`echo ${args} | grep OCSP-Test` + if [ ! -z "${hasOCSP}" ]; then + Display "SKIPPING ${testPgm} ${testPurpose}" + continue + fi + fi + + if [ ${doNIST} -eq 0 ]; then + hasNIST=`echo ${args} | grep NIST-Test` + if [ ! -z "${hasNIST}" ]; then + Display "SKIPPING ${testPgm} ${testPurpose}" + continue + fi + fi + + # This "if" is not reached when doNIST is not set. The assumption + # is that NIST tests are basic, NIST Path Discovery tests are + # additional + if [ ${doNIST_PDTest} -eq 0 ]; then + hasNIST=`echo ${args} | grep NIST-PDTest` + if [ ! -z "${hasNIST}" ]; then + Display "SKIPPING ${testPgm} ${testPurpose}" + continue + fi + fi + + Display "RUNNING ${testPgm} ${arenaCmd} ${testPurpose}" + + numtests=`expr ${numtests} + 1` + + if [ ${checkmem} -eq 1 ]; then + dbx -C -c "runargs ${arenaCmd} ${args};check -all;run;exit" ${DIST_BIN}/${testPgm} > ${testOut} 2>&1 + else + ${DIST_BIN}/${testPgm} ${arenaCmd} ${args} > ${testOut} 2>&1 + fi + + # Examine output file to see if test failed and keep track of number + # of failures and names of failed tests. This assumes that the test + # uses our utility library for displaying information + + cat ${testOut} | tail -2 | grep "COMPLETED SUCCESSFULLY" >/dev/null 2>&1 + + if [ $? -ne 0 ]; then + testFail=1 + errors=`expr ${errors} + 1` + failedpgms="${failedpgms}\n${testPgm} ${testPurpose} " +# cat ${testOut} + else + testFail=0 + passed=`expr ${passed} + 1` + fi + cat ${testOut} + html_msg ${testFail} 0 "${testPgm} ${arenaCmd} ${shortTestPurpose}" + + if [ ${checkmem} -eq 1 ]; then + grep "(actual leaks:" ${testOut} > ${testOutMem} 2>&1 + if [ $? -ne 0 ]; then + prematureErrors=`expr ${prematureErrors} + 1` + failedprematurepgms="${failedprematurepgms}${testPgm} " + Display "...program terminated prematurely (unable to check for memory leak errors) ..." + else + #grep "(actual leaks: 0" ${testOut} > /dev/null 2>&1 + # special consideration for memory leak in NSS_NoDB_Init + grep "(actual leaks: 1 total size: 4 bytes)" ${testOut} > /dev/null 2>&1 + if [ $? -ne 0 ]; then + memErrors=`expr ${memErrors} + 1` + failedmempgms="${failedmempgms}${testPgm} " + cat ${testOutMem} + fi + fi + fi + + done + + if [ ${errors} -eq 0 ]; then + if [ ${memErrors} -eq 0 ]; then + Display "" + Display "************************************************************" + Display "END OF TESTS FOR PKIX ${testunit}: ALL TESTS COMPLETED SUCCESSFULLY" + Display "************************************************************" + Display "" + return 0 + fi + fi + + if [ ${errors} -eq 1 ]; then + plural="" + else + plural="S" + fi + + Display "" + Display "*******************************************************************************" + Display "END OF TESTS FOR PKIX ${testunit}: ${errors} UNIT TEST${plural} FAILED: ${failedpgms}" + Display "" + if [ ${checkmem} -eq 1 ]; then + if [ ${memErrors} -eq 1 ]; then + memPlural="" + else + memPlural="S" + fi + Display " ${memErrors} MEMORY LEAK TEST${memPlural} FAILED: ${failedmempgms}" + + if [ ${prematureErrors} -ne 0 ]; then + if [ ${prematureErrors} -eq 1 ]; then + prematurePlural="" + else + prematurePlural="S" + fi + Display " ${prematureErrors} MEMORY LEAK TEST${prematurePlural} INDETERMINATE: ${failedprematurepgms}" + fi + + fi + Display "*******************************************************************************" + Display "" + combinedErrors=`expr ${errors} + ${memErrors} + ${prematureErrors}` + + return ${combinedErrors} + +} |