summaryrefslogtreecommitdiff
path: root/drivers/video
Commit message (Expand)AuthorAgeFilesLines
* ENGR00259593 IPU/V4L2 output: Fix video ouput to video16 can not workWayne Zou2013-04-191-13/+2
* ENGR00254931 IPUv3 Fb: Fix display twinkling issue during suspend/resumeWayne Zou2013-03-211-2/+13
* ENGR00253927 IPU: Fix NULL pointer bug when BG EOF interrupt occur earlyWayne Zou2013-03-131-34/+46
* ENGR00253947 EPDC: fix reboot failureRobby Cai2013-03-121-3/+8
* ENGR00253849 EPDC: fix build warnings in epdc fb driverRobby Cai2013-03-121-4/+2
* ENGR00251830 LDB: Fix the bug of LDB separate mode for dual LVDS displayWayne Zou2013-02-271-13/+30
* ENGR00251015-2 FB/IPU: Add mxcfb ioctrl to update IPU DP CSC matrixWayne Zou2013-02-201-0/+14
* ENGR00240740-3 IPUv3 fb:Workaround bootup ipu errorLiu Ying2013-01-211-10/+10
* ENGR00239734 Mx6 HDMI PHY: Add 2 variable to pass board specific configSandor Yu2013-01-181-0/+20
* ENGR00239569 Mx6x HDMI Add RGB/YCbCr output select via system fileSandor Yu2013-01-111-1/+55
* ENGR00239207 MX6x HDMI add some support modesSandor Yu2013-01-111-4/+54
* ENGR00239062 MX6X HDMI add 1440x240p60 mode supportSandor Yu2013-01-081-4/+4
* ENGR00238391 MX6x HDMI: Add default EDID config function when read EDID failedSandor Yu2012-12-271-1/+9
* ENGR00238384 MX6x HDMI: Update HDMI setting when HDMI cable pluginSandor Yu2012-12-271-1/+5
* ENGR00238382 MX6 HDMI: Change VGA mode flag, adjust default modelist sequencySandor Yu2012-12-271-7/+8
* ENGR00238357 MX6x Change HDMI default output RGBSandor Yu2012-12-271-7/+0
* ENGR00231808: Add epdc pmic shut down featureLiGang2012-12-131-0/+25
* ENGR00233494 EPDC: Driver only supports 16 LUTsMichael Minnick2012-11-212-41/+37
* ENGR00232660 EPDC: Wrong panel loaded at bootMichael Minnick2012-11-081-13/+24
* ENGR00232930 Added default video mode check, make sure it is a CEA mode.Sandor Yu2012-11-081-0/+16
* ENGR00232424 LDB:Support WXGA@60 video modeLiu Ying2012-11-061-0/+8
* ENGR00227965 EPDC: Init sequence leaves EDPC clocks onMichael Minnick2012-10-231-0/+2
* ENGR00229803-2 sii902x: add dependency on CONFIG_FB_MXC_ELCDIF_FBRobby Cai2012-10-231-1/+1
* ENGR00229803-1 lcdif: export mxcfb_elcdif_register_mode needed by sii902x driverRobby Cai2012-10-231-0/+1
* ENGR00229473 elcdif fb: fix lcd framebuffer potential recursive lockingRobby Cai2012-10-231-5/+0
* ENGR00229291 EPDC: MX6: Treat fully-collided VOID update as a collisionMichael Minnick2012-10-151-1/+7
* ENGR00229290 EPDC: MX6: Adjust number of LUTs for 5-bit waveformMichael Minnick2012-10-121-4/+10
* ENGR00227568 elcdif: fix fb wait for vsync timeout when suspend and resumeRobby Cai2012-10-091-4/+9
* ENGR00180348 EPDC: invalid data when width is 2048 or greaterMichael Minnick2012-10-011-10/+91
* ENGR00225981-4 IPU: Remove IPU fb build for MX6SLRobby Cai2012-09-292-3/+5
* ENGR00225960-03 sii902x: Added sii902x HDMI driver with ELCDIF FBSandor Yu2012-09-293-0/+565
* ENGR00225960-02 FB: Support sii902x HDMI driver in ELCDIF FBSandor Yu2012-09-291-4/+130
* ENGR00223797-4 IPUv3 fb:Support framebuffer late initLiu Ying2012-09-271-27/+78
* ENGR00224700 IPUv3 FB:Support RGB24/RGB32/ABGR32 pixel formatsLiu Ying2012-09-211-127/+157
* ENGR00224910 IPUv3 fb:Correct logic to check BGR24 for if= optionLiu Ying2012-09-211-1/+1
* ENGR00221594 Add Dithering algorism support into EPDC driverDaiyu Ko2012-09-191-13/+197
* ENGR00223056 Fix HDMI build warningSandor Yu2012-09-051-25/+1
* ENGR00221854 HDMI: suspend/resume hdmi_phy fail to lock.Sandor Yu2012-09-051-1/+1
* ENGR00182456-3 HDMI VIDEO: abort audio when unblank and plugoutChen Liangjun2012-08-291-0/+6
* ENGR00221444 HDMI: video mode wrong when bootup without HDMI cableSandor Yu2012-08-271-0/+2
* ENGR00220538 HDMI: Clock mismatch in suspend&resume when video playbackSandor Yu2012-08-221-0/+7
* ENGR00220734 IPUv3 fb:Rewind eof irq sync mechanism backLiu Ying2012-08-221-7/+19
* ENGR00220913 LDB: disable LDB DI clock when suspendWayne Zou2012-08-211-0/+7
* ENGR00179425 HDMI: Sometime HDMI EDID read failedSandor Yu2012-08-211-0/+7
* ENGR00180117 HDMI: No audio output in 1080P on some TVSandor Yu2012-08-151-5/+9
* ENGR00216786-2 IPU/FB: Allocate DMA buffer from DMA zoneWayne Zou2012-08-131-3/+3
* ENGR00215952 HDMI:'PHY PLL not locked' messages during bootSandor Yu2012-08-091-0/+3
* ENGR00219024 [EPDC]Fix EPDC resume failure.Anson Huang2012-08-071-0/+2
* ENGR00219153 HDMI: Remove enable/disable_pins in blank/unblank functionSandor Yu2012-08-021-2/+0
* ENGR00182743-3 FB MXC: Add non-interleaved YUV444 pixel format supportWayne Zou2012-07-271-0/+2
View Lorry Controller Status