summaryrefslogtreecommitdiff
path: root/drivers/mtd/chips
Commit message (Collapse)AuthorAgeFilesLines
* mtd: cfi_cmdset_0002: Rename chip_ready variablesTokunori Ikegami2022-04-281-7/+7
| | | | | | | Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-5-ikegami.t@gmail.com
* mtd: cfi_cmdset_0002: Add S29GL064N ID definitionTokunori Ikegami2022-04-281-2/+3
| | | | | | | | | It is for the model number 01, 02, V1 and V2. Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-4-ikegami.t@gmail.com
* mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064NTokunori Ikegami2022-04-281-8/+34
| | | | | | | | | | | | | | | | | | Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") buffered writes fail on S29GL064N. This is because, on S29GL064N, reads return 0xFF at the end of DQ polling for write completion, where as, chip_good() check expects actual data written to the last location to be returned post DQ polling completion. Fix is to revert to using chip_good() for S29GL064N which only checks for DQ lines to settle down to determine write completion. Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/ Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Cc: stable@vger.kernel.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-3-ikegami.t@gmail.com
* mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_writeTokunori Ikegami2022-04-281-63/+32
| | | | | | | | | | | | | This is a preparation patch for the S29GL064N buffer writes fix. There is no functional change. Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/ Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Cc: stable@vger.kernel.org Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-2-ikegami.t@gmail.com
* mtd: gen_probe: Use bitmap_zalloc() when applicableChristophe JAILLET2021-12-091-5/+4
| | | | | | | | | | | | | 'chip_map' is a bitmap. So use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/a6fe58dffe553a3e79303777d3ba9c60d7613c5b.1637510255.git.christophe.jaillet@wanadoo.fr
* mtd: fixup CFI on ixp4xxArnd Bergmann2021-10-151-0/+2
| | | | | | | | | | | | | | | | drivers/mtd/maps/ixp4xx.c requires MTD_CFI_BE_BYTE_SWAP to be set in order to compile. drivers/mtd/maps/ixp4xx.c:57:4: error: #error CONFIG_MTD_CFI_BE_BYTE_SWAP required This patch avoids the #error output by enforcing the policy in Kconfig. Not sure if this is the right approach, but it helps doing randconfig builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210927141045.1597593-1-arnd@kernel.org
* Merge tag 'mtd/fixes-for-5.14-rc7' of ↵Linus Torvalds2021-08-161-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "MTD core fixes: - Fix lock hierarchy in deregister_mtd_blktrans - Handle flashes without OTP gracefully - Break circular locks in register_mtd_blktrans MTD device fixes: - mchp48l640: - Fix memory leak on cmd - Silence some uninitialized variable warnings - blkdevs: - Initialize rq.limits.discard_granularity CFI fixes: - Fix crash when erasing/writing AMD cards Raw NAND fixes: - Fix of_get_nand_secure_regions(): - Add a missing check - Avoid an unwanted probe failure when a DT property is missing" * tag 'mtd/fixes-for-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: Fix probe failure due to of_get_nand_secure_regions() mtd: fix lock hierarchy in deregister_mtd_blktrans mtd: devices: mchp48l640: Fix memory leak on cmd mtd: cfi_cmdset_0002: fix crash when erasing/writing AMD cards mtd: core: handle flashes without OTP gracefully mtd: mchp48l640: silence some uninitialized variable warnings mtd: break circular locks in register_mtd_blktrans mtd: rawnand: Add a check in of_get_nand_secure_regions() mtd: mtd_blkdevs: Initialize rq.limits.discard_granularity
| * mtd: cfi_cmdset_0002: fix crash when erasing/writing AMD cardsAndreas Persson2021-07-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Erasing an AMD linear flash card (AM29F016D) crashes after the first sector has been erased. Likewise, writing to it crashes after two bytes have been written. The reason is a missing check for a null pointer - the cmdset_priv field is not set for this type of card. Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register") Signed-off-by: Andreas Persson <andreasp56@outlook.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/DB6P189MB05830B3530B8087476C5CFE4C1159@DB6P189MB0583.EURP189.PROD.OUTLOOK.COM
* | mtd: cfi_util: Fix unreachable code issueGustavo A. R. Silva2021-07-121-2/+2
|/ | | | | | | | | | | | | | | | | | | | | Fix the following warning: drivers/mtd/chips/cfi_util.c:112:3: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough] fallthrough; ^ include/linux/compiler_attributes.h:210:41: note: expanded from macro 'fallthrough' # define fallthrough __attribute__((__fallthrough__)) ^ drivers/mtd/chips/cfi_util.c:168:3: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough] fallthrough; ^ include/linux/compiler_attributes.h:210:41: note: expanded from macro 'fallthrough' # define fallthrough __attribute__((__fallthrough__)) by placing the fallthrough; statement inside ifdeffery. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
* mtd: Convert list_for_each to entry variantZou Wei2021-06-111-4/+1
| | | | | | | | | | convert list_for_each() to list_for_each_entry() where applicable. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1623155699-61935-1-git-send-email-zou_wei@huawei.com
* mtd: core: Constify buf in mtd_write_user_prot_reg()Tudor Ambarus2021-04-162-6/+7
| | | | | | | | | | | | | | The write buffer comes from user and should be const. Constify write buffer in mtd core and across all _write_user_prot_reg() users. cfi_cmdset_{0001, 0002} and onenand_base will pay the cost of an explicit cast to discard the const qualifier since the beginning, since they are using an otp_op_t function prototype that is used for both reads and writes. mtd_dataflash and SPI NOR will benefit of the const buffer because they are using different paths for writes and reads. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210403060931.7119-1-tudor.ambarus@microchip.com
* Merge tag 'cfi/for-5.13' of ↵Richard Weinberger2021-04-151-1/+5
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next CFI changes Just a couple of fixes for v5.13-rc1 * Disable broken buffered writes for CFI chips within ID 0x2201 * Address a Coverity report for unused value
| * mtd: cfi_cmdset_0002: remove redundant assignment to variable timeoColin Ian King2021-04-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | The variable timeo is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20210325174514.486272-1-colin.king@canonical.com Addresses-Coverity: ("Unused value")
| * mtd: cfi_cmdset_0002: Disable buffered writes for AMD chip 0x2201Mauri Sandberg2021-04-081-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffer writes do not work with AMD chip 0x2201. The chip in question is a AMD/Spansion/Cypress Semiconductor S29GL256N and datasheet [1] talks about writing buffers being possible. While waiting for a neater solution resort to writing word-sized chunks only. Without the patch kernel logs will be flooded with entries like below: jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 jffs2_build_filesystem(): unlocking the mtd device... done. jffs2_build_filesystem(): erasing all blocks after the end marker... MTD do_write_buffer_wait(): software timeout, address:0x01ec000a. jffs2: Write clean marker to block at 0x01920000 failed: -5 MTD do_write_buffer_wait(): software timeout, address:0x01e2000a. jffs2: Write clean marker to block at 0x01880000 failed: -5 MTD do_write_buffer_wait(): software timeout, address:0x01e0000a. jffs2: Write clean marker to block at 0x01860000 failed: -5 MTD do_write_buffer_wait(): software timeout, address:0x01dc000a. jffs2: Write clean marker to block at 0x01820000 failed: -5 MTD do_write_buffer_wait(): software timeout, address:0x01da000a. jffs2: Write clean marker to block at 0x01800000 failed: -5 ... Tested on a Buffalo wzr-hp-g300nh running kernel 5.10.16. [1] https://www.cypress.com/file/219941/download or https://datasheetspdf.com/pdf-file/565708/SPANSION/S29GL256N/1 Signed-off-by: Mauri Sandberg <sandberg@mailfence.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20210309174859.362060-1-sandberg@mailfence.com
* | mtd: cfi: Fix fall-through warnings for ClangGustavo A. R. Silva2021-03-113-0/+5
|/ | | | | | | | | | | | In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements and a return instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210305081933.GA137147@embeddedor
* mtd: Replace HTTP links with HTTPS onesAlexander A. Klimov2020-08-021-1/+1
| | | | | | | | | | | | | | | | | | | | | Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: cfi_cmdset_0001: Support the absence of protection registersJean-Philippe Brucker2020-04-301-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | The flash controller implemented by the Arm Base platform behaves like the Intel StrataFlash J3 device, but omits several features. In particular it doesn't implement a protection register, so "Number of Protection register fields" in the Primary Vendor-Specific Extended Query, is 0. The Intel StrataFlash J3 datasheet only lists 1 as a valid value for NumProtectionFields. It describes the field as: "Number of Protection register fields in JEDEC ID space. “00h,” indicates that 256 protection bytes are available" While a value of 0 may arguably not be architecturally valid, the driver's current behavior is certainly wrong: if NumProtectionFields is 0, read_pri_intelext() adds a negative value to the unsigned extra_size, and ends up in an infinite loop. Fix it by ignoring a NumProtectionFields of 0. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* mtd: Convert fallthrough comments into statementsMiquel Raynal2020-03-304-22/+16
| | | | | | | | | | | | | | | | | | | | Use Joe Perches cvt_fallthrough.pl script to convert /* fallthrough */ comments (and its derivatives) into a fallthrough; statement. This automatically drops useless ones. Do it MTD-wide. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/linux-mtd/20200325212115.14170-1-miquel.raynal@bootlin.com
* mtd: cfi_cmdset_0002: fix delayed error detection on HyperFlashSergei Shtylyov2019-11-091-25/+33
| | | | | | | | | | | | | | The commit 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register") added checking for the status register error bits into chip_good() to only return 1 if these bits are 0s. Unfortunately, this means that polling using chip_good() always reaches a timeout condition when erase or program failure bits are set. Let's fully delegate the task of determining the error conditions to cfi_check_err_status() and make chip_good() only look for the Device Ready/Busy condition. Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* mtd: cfi_cmdset_0002: only check errors when ready in cfi_check_err_status()Sergei Shtylyov2019-11-091-0/+4
| | | | | | | | | | | Cypress S26K{L|S}P{128|256|512}S datasheet says that the error bits in the status register are only valid when the "device ready" bit 7 is set. Add the check for the device ready bit in cfi_check_err_status() as that function isn't always called with this bit set. Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* mtd: cfi_cmdset_0002: don't free cfi->cfiq in error path of cfi_amdstd_setup()Hou Tao2019-11-091-1/+0
| | | | | | | | | | Else there may be a double-free problem, because cfi->cfiq will be freed by mtd_do_chip_probe() if both the two invocations of check_cmd_set() return failure. Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* mtd: cfi_cmdset_*: kill useless 'ret' variable initializersSergei Shtylyov2019-11-093-18/+18
| | | | | | | | The 'ret' local variables are typically initialized to 0 but this value is often unused, thus we can kill those initializers. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* mtd: cfi_util: use DIV_ROUND_UP() in cfi_udelay()Sergei Shtylyov2019-11-091-1/+1
| | | | | | | | | | | | | | | | | | | | Use DIV_ROUND_UP() in cfi_udelay() instead of open-coding it... Doing this also helpfully gets rid of two complaints from 'scripts/checkpatch.pl --strict': CHECK: spaces preferred around that '+' (ctx:VxV) #29: FILE: drivers/mtd/chips/cfi_util.c:29: + msleep((us+999)/1000); ^ CHECK: spaces preferred around that '/' (ctx:VxV) #29: FILE: drivers/mtd/chips/cfi_util.c:29: + msleep((us+999)/1000); ^ Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* mtd: cfi_cmdset_0002: Fix do_erase_chip() to get chip as erasing modeTokunori Ikegami2019-09-151-1/+1
| | | | | | | | | | The chip state is set to erasing by the function after getting chip. So it should be to get chip as erasing mode at first. But previously it was to get chip as writing mode then fix as erasing. Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: cfi_cmdset_0002: Disable write buffer functions if FORCE_WORD_WRITE is 1Tokunori Ikegami2019-08-271-0/+6
| | | | | | | | | | | | | | Some write buffer functions are not used when FORCE_WORD_WRITE is set to 1. So the compile warning messages are output if FORCE_WORD_WRITE is 1. To resolve this disable the write buffer functions if FORCE_WORD_WRITE is 1. Cc: Fabio Bettoni <fbettoni@gmail.com> Co: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* mtd: cfi_cmdset_0002: Split do_write_oneword() to reduce exit pathsTokunori Ikegami2019-08-271-14/+24
| | | | | | | | | | | | | The do_write_oneword_done() is called twice at the exit paths. By splitting the retry functionality it can be reduced to call once. Cc: Fabio Bettoni <fbettoni@gmail.com> Co: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* mtd: cfi_cmdset_0002: Split wait for write buffer completion sequenceTokunori Ikegami2019-08-271-41/+51
| | | | | | | | | | | | | | Split wait for write completion from do_write_buffer() into separate function. Cc: Fabio Bettoni <fbettoni@gmail.com> Co: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> [vigneshr@ti.com: Reword commit message] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* mtd: cfi_cmdset_0002: Split write-to-buffer-reset sequenceTokunori Ikegami2019-08-271-16/+22
| | | | | | | | | | | | Just refactor to split the sequence from do_write_buffer(). Cc: Fabio Bettoni <fbettoni@gmail.com> Co: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* mtd: cfi_cmdset_0002: Split do_write_oneword() op_done goto statementTokunori Ikegami2019-08-271-19/+43
| | | | | | | | | | | | | | | To reduce function size and to remove the goto statement, split the op_done goto statement part into do_write_oneword_done(). Also split the start part into do_write_oneword_start() to be symmetrical. Cc: Fabio Bettoni <fbettoni@gmail.com> Co: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> [vigneshr@ti.com: Reword commit message] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* mtd: cfi_cmdset_0002: Split do_write_oneword() to reduce function sizeTokunori Ikegami2019-08-271-40/+50
| | | | | | | | | | | | | Reduce the size of do_write_oneword() by extracting a helper function for the hardware access. Cc: Fabio Bettoni <fbettoni@gmail.com> Co: Hauke Mehrtens <hauke@hauke-m.de> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* mtd: cfi_cmdset_0002: Remove goto statement from do_write_buffer()Tokunori Ikegami2019-08-271-26/+27
| | | | | | | | | | | | | Remove goto statement from do_write_buffer() to simplify the code flow. Cc: Fabio Bettoni <fbettoni@gmail.com> Co: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> [vigneshr@ti.com: Reword commit message] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword()Tokunori Ikegami2019-08-271-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported by the OpenWRT team, write requests sometimes fail on some platforms. Currently to check the state chip_ready() is used correctly as described by the flash memory S29GL256P11TFI01 datasheet. Also chip_good() is used to check if the write is succeeded and it was implemented by the commit fb4a90bfcd6d8 ("[MTD] CFI-0002 - Improve error checking"). But actually the write failure is caused on some platforms and also it can be fixed by using chip_good() to check the state and retry instead. Also it seems that it is caused after repeated about 1,000 times to retry the write one word with the reset command. By using chip_good() to check the state to be done it can be reduced the retry with reset. It is depended on the actual flash chip behavior so the root cause is unknown. Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Reported-by: Fabio Bettoni <fbettoni@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> [vigneshr@ti.com: Fix a checkpatch warning] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* mtd: chips: gen_probe: kill useless initializer in mtd_do_chip_probe()Sergei Shtylyov2019-08-271-1/+1
| | | | | | | | The 'mtd' local variable is initialized but this value is never used, thus kill that initializer. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
* Merge tag 'nand/for-5.3' of ↵Richard Weinberger2019-07-063-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: * fix BCH ECC layout for large page NAND parts * fallback to detected ecc-strength, ecc-step-size * when oops in progress use pio and interrupt polling * code refactor code to introduce helper functions * add support for v7.3 controller - FSMC: * use nand_op_trace for operation tracing - GPMI: * move all driver code into single file * various cleanups (including dmaengine changes) * use runtime PM to manage clocks * implement exec_op - MTK: * correct low level time calculation of r/w cycle * improve data sampling timing for read cycle * add validity check for CE# pin setting * fix wrongly assigned OOB buffer pointer issue * re-license MTK NAND driver as Dual MIT/GPL - STM32: * manage the get_irq error case * increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips
| * treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * treewide: Add SPDX license identifier for more missed filesThomas Gleixner2019-05-212-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | mtd: cfi_cmdset_0002: Add support for polling status registerVignesh Raghavendra2019-06-271-17/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HyperFlash devices are compliant with CFI AMD/Fujitsu Extended Command Set (0x0002) for flash operations, therefore drivers/mtd/chips/cfi_cmdset_0002.c can be used as is. But these devices do not support DQ polling method of determining chip ready/good status. These flashes provide Status Register whose bits can be polled to know status of flash operation. Cypress HyperFlash datasheet here[1], talks about CFI Amd/Fujitsu Extended Query version 1.5. Bit 0 of "Software Features supported" field of CFI Primary Vendor-Specific Extended Query table indicates presence/absence of status register and Bit 1 indicates whether or not DQ polling is supported. Using these bits, its possible to determine whether flash supports DQ polling or need to use Status Register. Add support for polling Status Register to know device ready/status of erase/write operations when DQ polling is not supported. Print error messages on erase/program failure by looking at related Status Register bits. [1] https://www.cypress.com/file/213346/download Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tokunori Ikegami <ikegami.t@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* | mtd: cfi_cmdset_0002: dynamically determine the max sectorsChris Packham2019-06-271-5/+8
|/ | | | | | | | | | | | | | Because PPB unlocking unlocks the whole chip cfi_ppb_unlock() needs to remember the locked status for each sector so it can re-lock the unaddressed sectors. Dynamically calculate the maximum number of sectors rather than using a hardcoded value that is too small for larger chips. Tested with Spansion S29GL01GS11TFI flash device. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: cfi_cmdset_0002: Mark expected switch fall-throughsGustavo A. R. Silva2019-05-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/mtd/chips/cfi_cmdset_0002.c: In function ‘get_chip’: drivers/mtd/chips/cfi_cmdset_0002.c:870:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (mode == FL_READY && chip->oldstate == FL_READY) ^ drivers/mtd/chips/cfi_cmdset_0002.c:873:2: note: here default: ^~~~~~~ drivers/mtd/chips/cfi_cmdset_0002.c: In function ‘cfi_amdstd_sync’: drivers/mtd/chips/cfi_cmdset_0002.c:2745:16: warning: this statement may fall through [-Wimplicit-fallthrough=] chip->state = FL_SYNCING; ~~~~~~~~~~~~^~~~~~~~~~~~ drivers/mtd/chips/cfi_cmdset_0002.c:2750:3: note: here case FL_SYNCING: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Tokunori Ikegami <ikegami.t@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: cfi_util: mark expected switch fall-throughsGustavo A. R. Silva2019-05-061-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/mtd/chips/cfi_util.c: In function ‘cfi_build_cmd’: drivers/mtd/chips/cfi_util.c:110:10: warning: this statement may fall through [-Wimplicit-fallthrough=] onecmd |= (onecmd << (chip_mode * 32)); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/chips/cfi_util.c:112:2: note: here case 4: ^~~~ drivers/mtd/chips/cfi_util.c:113:10: warning: this statement may fall through [-Wimplicit-fallthrough=] onecmd |= (onecmd << (chip_mode * 16)); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/chips/cfi_util.c:114:2: note: here case 2: ^~~~ drivers/mtd/chips/cfi_util.c: In function ‘cfi_merge_status’: drivers/mtd/chips/cfi_util.c:163:7: warning: this statement may fall through [-Wimplicit-fallthrough=] res |= (onestat >> (chip_mode * 32)); ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/chips/cfi_util.c:165:2: note: here case 4: ^~~~ drivers/mtd/chips/cfi_util.c:166:7: warning: this statement may fall through [-Wimplicit-fallthrough=] res |= (onestat >> (chip_mode * 16)); ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/chips/cfi_util.c:167:2: note: here case 2: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: cfi: fix deadloop in cfi_cmdset_0002.c do_write_bufferLiu Jian2019-04-051-1/+5
| | | | | | | | | | | | | | In function do_write_buffer(), in the for loop, there is a case chip_ready() returns 1 while chip_good() returns 0, so it never break the loop. To fix this, chip_good() is enough and it should timeout if it stay bad for a while. Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Signed-off-by: Yi Huaijie <yihuaijie@huawei.com> Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Tokunori Ikegami <ikegami_to@yahoo.co.jp> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: cfi: cmdset_0001: Use struct_size() in kmalloc()Gustavo A. R. Silva2019-01-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
* mtd: gen_probe: Use struct_size() in kmalloc()Gustavo A. R. Silva2019-01-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
* mtd: cfi_cmdset_0020: Mark expected switch fall-throughsGustavo A. R. Silva2018-11-091-0/+6
| | | | | | | | | | | | | | In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114857 ("Missing break in switch") Addresses-Coverity-ID: 114858 ("Missing break in switch") Addresses-Coverity-ID: 114859 ("Missing break in switch") Addresses-Coverity-ID: 114860 ("Missing break in switch") Addresses-Coverity-ID: 114861 ("Missing break in switch") Addresses-Coverity-ID: 114862 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* Merge tag 'nand/for-4.19' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon2018-08-111-8/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull NAND updates from Miquel Raynal: " NAND core changes: - Add the SPI-NAND framework. - Create a helper to find the best ECC configuration. - Create NAND controller operations. - Allocate dynamically ONFI parameters structure. - Add defines for ONFI version bits. - Add manufacturer fixup for ONFI parameter page. - Add an option to specify NAND chip as a boot device. - Add Reed-Solomon error correction algorithm. - Better name for the controller structure. - Remove unused caller_is_module() definition. - Make subop helpers return unsigned values. - Expose _notsupp() helpers for raw page accessors. - Add default values for dynamic timings. - Kill the chip->scan_bbt() hook. - Rename nand_default_bbt() into nand_create_bbt(). - Start to clean the nand_chip structure. - Remove stale prototype from rawnand.h. Raw NAND controllers drivers changes: - Qcom: structuring cleanup. - Denali: use core helper to find the best ECC configuration. - Possible build of almost all drivers by adding a dependency on COMPILE_TEST for almost all of them in Kconfig, implies various fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even changes in sparc64 and ia64 architectures. - Clean the ->probe() functions error path of a lot of drivers. - Migrate all drivers to use nand_scan() instead of nand_scan_ident()/nand_scan_tail() pair. - Use mtd_device_register() where applicable to simplify the code. - Marvell: * Handle on-die ECC. * Better clocks handling. * Remove bogus comment. * Add suspend and resume support. - Tegra: add NAND controller driver. - Atmel: * Add module param to avoid using dma. * Drop Wenyou Yang from MAINTAINERS. - Denali: optimize timings handling. - FSMC: Stop using chip->read_buf(). - FSL: * Switch to SPDX license tag identifiers. * Fix qualifiers in MXC init functions. Raw NAND chip drivers changes: - Micron: * Add fixup for ONFI revision. * Update ecc_stats.corrected. * Make ECC activation stateful. * Avoid enabling/disabling ECC when it can't be disabled. * Get the actual number of bitflips. * Allow forced on-die ECC. * Support 8/512 on-die ECC. * Fix on-die ECC detection logic. - Hynix: * Fix decoding the OOB size on H27UCG8T2BTR. * Use ->exec_op() in hynix_nand_reg_write_op(). "
| * mtd: cfi_cmdset_0002: Avoid walking all chips when unlocking.Joakim Tjernlund2018-06-221-0/+2
| | | | | | | | | | | | | | | | | | | | cfi_ppb_unlock() walks all flash chips when unlocking sectors, avoid walking chips unaffected by the unlock operation. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| * mtd: cfi_cmdset_0002: Fix unlocking requests crossing a chip boudaryJoakim Tjernlund2018-06-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The "sector is in requested range" test used to determine whether sectors should be re-locked or not is done on a variable that is reset everytime we cross a chip boundary, which can lead to some blocks being re-locked while the caller expect them to be unlocked. Fix the check to make sure this cannot happen. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| * mtd: cfi_cmdset_0002: fix SEGV unlocking multiple chipsJoakim Tjernlund2018-06-221-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | cfi_ppb_unlock() tries to relock all sectors that were locked before unlocking the whole chip. This locking used the chip start address + the FULL offset from the first flash chip, thereby forming an illegal address. Fix that by using the chip offset(adr). Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
| * mtd: cfi_cmdset_0002: Use right chip in do_ppb_xxlock()Joakim Tjernlund2018-06-221-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | do_ppb_xxlock() fails to add chip->start when querying for lock status (and chip_ready test), which caused false status reports. Fix that by adding adr += chip->start and adjust call sites accordingly. Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking") Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* | mtd: Make Kconfig formatting consistentBoris Brezillon2018-07-191-1/+1
| | | | | | | | | | | | | | | | Fix indentation and replace '---help---' by 'help' to make things consistent. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
View Lorry Controller Status