summaryrefslogtreecommitdiff
path: root/drivers/hwmon
Commit message (Collapse)AuthorAgeFilesLines
* ENGR00174127 mag3110: merge the mag3110 sensor driverXinyu Chen2012-07-203-0/+581
| | | | | | | | | Merge mag3110 drivers from sensor team. The drivers are updated with chip position configure in driver, export set delay interface to userspace and use polling mode instead of interrupt mode. Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
* ENGR00174024 mma8451: update 3-axis accelerometer driverXinyu Chen2012-07-201-126/+252
| | | | | | | | Merge mma8451 drivers from sensor team. The drivers are updated with chip position configure in driver, export enable and position interface to userspace. Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
* ENGR00143921-1 - EPDC/MAX17135: Add controls for V3P3 regulatorDanny Nold2012-07-201-1/+1
| | | | | | | | - Added V3P3 regulator to max17135 - Added calls to enable/disable V3P3 regulator from EPDC driver - Improved Kconfig detail for max17135 MFD and HWMON entries Signed-off-by: Danny Nold <dannynold@freescale.com>
* ENGR00153275-1 ahci L2638 add the standalone ahci temperature monitorRichard Zhu2012-07-203-0/+346
| | | | | | | | | | | | | | | | | | | | | based on the 2.6.38 kernel mainline, refer to linux lm-sensors architeture, add the standalone ahci temperature monitor driver on fsl i.mx53 platforms. Less than half sencond is used in one temperature read operation. usage: Use the following cmd to cat the i.mx53 soc temperature after boot up i.mx53 system in user space. for example: ...$ cat /sys/class/hwmon/hwmon1/device/temp1_input 61000 or run the following cmd after configure the lm-sensors ...$ sensors imx-ahci-hwmon-isa-0000 Adapter: ISA adapter temp1: +58.0 C Signed-off-by: Richard Zhu <r65037@freescale.com>
* ENGR00142950-2 - MAX17135 EPD PMIC: Ported to 2.6.38 kernelDanny Nold2012-07-203-0/+180
| | | | | | | | - Ported MAX17135 MFD core driver to 2.6.38 - Ported MAX17135 HWMON temperature sensor driver to 2.6.38 - Ported MAX17135 regulator driver to 2.6.38 Signed-off-by: Danny Nold <dannynold@freescale.com>
* ENGR00140036 Set init max poll delay time in mma sensor driverSammy He2012-07-202-7/+9
| | | | | | | | 1. Set initial max poll delay time in mma8450 and mma8451 accelerometer sensor driver. And remove one build warning. 2. Remove dev parent set. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00141391-2 PMIC: porting da9053 to i.mx platformZhou Jingyu2012-07-203-1/+9
| | | | | | | | Fix da9053 backlight Kconfig error porting da9052 regulator driver Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Acked-by: Lily Zhang <r58066@freescale.com>
* ENGR00141391-1 PMIC: Add DA9053 source code from DialogZhou Jingyu2012-07-201-0/+644
| | | | | | | Add DA9053 original source code Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Acked-by: Lily Zhang <r58066@freescale.com>
* ENGR00137546-1 MMA8450: Add mma8450 accelerometer driverSammy He2012-07-203-0/+396
| | | | | | Add mma8450 accelerometer driver. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00137485-1 MMA8451: Add mma8451 accelerometer driverSammy He2012-07-203-0/+377
| | | | | | | Add mma8451 accelerometer driver. Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com> Signed-off-by: Sammy He <r62914@freescale.com>
* hwmon: (fam15h_power) Increase output resolutionAndre Przywara2012-06-171-4/+4
| | | | | | | | | | | | | | | | | commit 941a956b0e387b21f385f486c34ef67576775cfc upstream. On high CPU load the accumulating values in the running_avg_cap register are very low (below 10), so averaging them too early leads to unnecessary poor output resolution. Since we pretend to output micro-Watt we better keep all the bits we have as long as possible. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (coretemp) fix oops on cpu unplugKirill A. Shutemov2012-05-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b704871124b477807966f06789c2b32f2de58bf7 upstream. coretemp tries to access core_data array beyond bounds on cpu unplug if core id of the cpu if more than NUM_REAL_CORES-1. BUG: unable to handle kernel NULL pointer dereference at 000000000000013c IP: [<ffffffffa00159af>] coretemp_cpu_callback+0x93/0x1ba [coretemp] PGD 673e5a067 PUD 66e9b3067 PMD 0 Oops: 0000 [#1] SMP CPU 79 Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter nf_conntrack_ipv4 nf_defrag_ipv4 ip6_tables xt_state nf_conntrack coretemp crc32c_intel asix tpm_tis pcspkr usbnet iTCO_wdt i2c_i801 microcode mii joydev tpm i2c_core iTCO_vendor_support tpm_bios i7core_edac igb ioatdma edac_core dca megaraid_sas [last unloaded: oprofile] Pid: 3315, comm: set-cpus Tainted: G W 3.4.0-rc5+ #2 QCI QSSC-S4R/QSSC-S4R RIP: 0010:[<ffffffffa00159af>] [<ffffffffa00159af>] coretemp_cpu_callback+0x93/0x1ba [coretemp] RSP: 0018:ffff880472fb3d48 EFLAGS: 00010246 RAX: 0000000000000124 RBX: 0000000000000034 RCX: 00000000ffffffff RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000246 RBP: ffff880472fb3d88 R08: ffff88077fcd36c0 R09: 0000000000000001 R10: ffffffff8184bc48 R11: 0000000000000000 R12: ffff880273095800 R13: 0000000000000013 R14: ffff8802730a1810 R15: 0000000000000000 FS: 00007f694a20f720(0000) GS:ffff88077fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000013c CR3: 000000067209b000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process set-cpus (pid: 3315, threadinfo ffff880472fb2000, task ffff880471fa0000) Stack: ffff880277b4c308 0000000000000003 ffff880472fb3d88 0000000000000005 0000000000000034 00000000ffffffd1 ffffffff81cadc70 ffff880472fb3e14 ffff880472fb3dc8 ffffffff8161f48d ffff880471fa0000 0000000000000034 Call Trace: [<ffffffff8161f48d>] notifier_call_chain+0x4d/0x70 [<ffffffff8107f1be>] __raw_notifier_call_chain+0xe/0x10 [<ffffffff81059d30>] __cpu_notify+0x20/0x40 [<ffffffff815fa251>] _cpu_down+0x81/0x270 [<ffffffff815fa477>] cpu_down+0x37/0x50 [<ffffffff815fd6a3>] store_online+0x63/0xc0 [<ffffffff813c7078>] dev_attr_store+0x18/0x30 [<ffffffff811f02cf>] sysfs_write_file+0xef/0x170 [<ffffffff81180443>] vfs_write+0xb3/0x180 [<ffffffff8118076a>] sys_write+0x4a/0x90 [<ffffffff816236a9>] system_call_fastpath+0x16/0x1b Code: 48 c7 c7 94 60 01 a0 44 0f b7 ac 10 ac 00 00 00 31 c0 e8 41 b7 5f e1 41 83 c5 02 49 63 c5 49 8b 44 c4 10 48 85 c0 74 56 45 31 ff <39> 58 18 75 4e eb 1f 49 63 d7 4c 89 f7 48 89 45 c8 48 6b d2 28 RIP [<ffffffffa00159af>] coretemp_cpu_callback+0x93/0x1ba [coretemp] RSP <ffff880472fb3d48> CR2: 000000000000013c Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (coretemp) Increase CPU core limitGuenter Roeck2012-05-071-1/+1
| | | | | | | | | | | | | | commit bdc71c9a87b898e4c380c23b2e3e18071312ecde upstream. CPU core ID is used to index the core_data[] array. The core ID is, however, not sequential; 10-core CPUS can have a core ID as high as 25. Increase the limit to 32 to be able to deal with current CPUs. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (fam15h_power) Fix pci_device_id arrayGuenter Roeck2012-05-071-3/+6
| | | | | | | | | | | | | commit c3e40a9972428d6e2d8e287ed0233a57a218c30f upstream. pci_match_id() takes an *array* of IDs which must be properly zero- terminated. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: fam15h_power: fix bogus values with current BIOSesAndre Przywara2012-05-071-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 00250ec90963b7ef6678438888f3244985ecde14 upstream. Newer BKDG[1] versions recommend a different initialization value for the running average range register in the northbridge. This improves the power reading by avoiding counter saturations resulting in bogus values for anything below about 80% of TDP power consumption. Updated BIOSes will have this new value set up from the beginning, but meanwhile we correct this value ourselves. This needs to be done on all northbridges, even on those where the driver itself does not register at. This fixes the driver on all current machines to provide proper values for idle load. [1] http://support.amd.com/us/Processor_TechDocs/42301_15h_Mod_00h-0Fh_BKDG.pdf Chapter 3.8: D18F5xE0 Processor TDP Running Average (p. 452) Signed-off-by: Andre Przywara <andre.przywara@amd.com> Acked-by: Jean Delvare <khali@linux-fr.org> [guenter.roeck@ericsson.com: Removed unnecessary return statement] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (fam15h_power) Correct sign extension of running_avg_captureAndreas Herrmann2012-04-021-1/+1
| | | | | | | | | | | | | | commit fc0900cbda9243957d812cd6b4cc87965f9fe75f upstream. Wrong bit was used for sign extension which caused wrong end results. Thanks to Andre for spotting this bug. Reported-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (w83627ehf) Fix memory leak in probe functionGuenter Roeck2012-03-191-4/+3
| | | | | | | | | | | | commit 32260d94408c553dca4ce54104edf79941a27536 upstream. The driver probe function leaked memory if creating the cpu0_vid attribute file failed. Fix by converting the driver to use devm_kzalloc. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (w83627ehf) Fix writing into fan_stop_time for NCT6775F/NCT6776FGuenter Roeck2012-03-191-1/+1
| | | | | | | | | | | | | commit 33fa9b620409edfc71aa6cf01a51f990fbe46ab8 upstream. NCT6775F and NCT6776F have their own set of registers for FAN_STOP_TIME. The correct registers were used to read FAN_STOP_TIME, but writes used the wrong registers. Fix it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804Guenter Roeck2012-03-122-5/+21
| | | | | | | | | | | commit 1bd612a25855f4cc9345052b53d7da697dba6358 upstream. Also update IDT datasheet locations. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000Jean Delvare2012-03-122-1/+12
| | | | | | | | | | | | commit 4de86126a712ba83fa038d277c8282f7ed466a4b upstream. These are fully compatible with Jedec JC 42.4 as far as I can see. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (pmbus_core) Fix maximum number of POUT alarm attributesGuenter Roeck2012-03-121-1/+2
| | | | | | | | | | | commit 7cb3c44fb1f7999e4c53b6a52de6bc25da6de079 upstream. There are up to three POUT alarm attributes, not two, since cap_alarm was added. Reported-by: Michele Petracca <mi.petracca@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (f75375s) Fix register write order when setting fans to full speedNikolaus Schulz2012-02-291-2/+3
| | | | | | | | | | | | | | | | commit c1c1a3d012fe5e82a9a025fb4b5a4f8ee67a53f6 upstream. By hwmon sysfs interface convention, setting pwm_enable to zero sets a fan to full speed. In the f75375s driver, this need be done by enabling manual fan control, plus duty mode for the F875387 chip, and then setting the maximum duty cycle. Fix a bug where the two necessary register writes were swapped, effectively discarding the setting to full-speed. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (ads1015) Fix file leak in probe functionGuenter Roeck2012-02-291-2/+1
| | | | | | | | | | | | | | commit 363434b5dc352464ac7601547891e5fc9105f124 upstream. An error while creating sysfs attribute files in the driver's probe function results in an error abort, but already created files are not removed. This patch fixes the problem. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Dirk Eibach <eibach@gdsys.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (max6639) Fix PPR register initialization to set both channelsChris D Schimp2012-02-291-7/+9
| | | | | | | | | | | | | | commit 2f2da1ac0ba5b6cc6e1957c4da5ff20e67d8442b upstream. Initialize PPR register for both channels, and set correct PPR register bits. Also remove unnecessary variable initializations. Signed-off-by: Chris D Schimp <silverchris@gmail.com> [guenter.roeck@ericsson.com: Merged two patches into one] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (max6639) Fix FAN_FROM_REG calculationChris D Schimp2012-02-291-3/+3
| | | | | | | | | | | | | | commit b63d97a36edb1aecf8c13e5f5783feff4d64c24b upstream. RPM calculation from tachometer value does not depend on PPR. Also, do not report negative RPM values. Signed-off-by: Chris D Schimp <silverchris@gmail.com> [guenter.roeck@ericsson.com: do not report negative RPM values] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (f75375s) Fix automatic pwm mode setting for F75373 & F75375Nikolaus Schulz2012-02-201-1/+1
| | | | | | | | | | | | commit 09e87e5c4f9af656af2a8a3afc03487c5d9287c3 upstream. In order to enable temperature mode aka automatic mode for the F75373 and F75375 chips, the two FANx_MODE bits in the fan configuration register need be set to 01, not 10. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (f75375s) Fix bit shifting in f75375_write16Nikolaus Schulz2012-02-201-1/+1
| | | | | | | | | | | | commit eb2f255b2d360df3f500042a2258dcf2fcbe89a2 upstream. In order to extract the high byte of the 16-bit word, shift the word to the right, not to the left. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (w83627ehf) Fix number of fans for NCT6776FGuenter Roeck2012-02-131-3/+23
| | | | | | | | | | | | | commit 585c0fd8216e0c9f98e2434092af7ec0f999522d upstream. NCT6776F can select fan input pins for fans 3 to 5 with a secondary set of chip register bits. Check that second set of bits in addition to the first set to detect if fans 3..5 are monitored. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (sht15) fix bad error codeVivien Didelot2012-02-031-1/+2
| | | | | | | | | | | commit 6edf3c30af01854c416f8654d3d5d2652470afd4 upstream. When no platform data was supplied, returned error code was 0. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776FGuenter Roeck2012-02-031-0/+6
| | | | | | | | | | | | | commit ad77c3e1808f07fa70f707b1c92a683b7c7d3f85 upstream. NCT6776F only supports pwm mode for pwm2 and pwm3. Return error if an attempt is made to set those pwm channels to DC mode. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (f71805f) Fix clamping of temperature limitsJean Delvare2012-02-031-5/+5
| | | | | | | | | | | | | | commit 86b2bbfdbd1fcc4a3aa62ccd3f245c40c5ad5b85 upstream. Properly clamp temperature limits set by the user. Without this fix, attempts to write temperature limits above the maximum supported by the chip (255 degrees Celsius) would arbitrarily and unexpectedly result in the limit being set to 0 degree Celsius. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (coretemp) Fix oops on CPU offliningJean Delvare2011-12-211-0/+2
| | | | | | | | | | | | | | | This is for stable kernel branch 3.0 only. Previous and later versions have different code paths and are not affected by this bug. This is the same fix as "hwmon: (coretemp) Fix oops on driver load" but for the CPU offlining case. Sorry for missing it at first. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Durgadoss R <durgadoss.r@intel.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: (jz4740) fix signedness bugAxel Lin2011-12-211-1/+1
| | | | | | | | | | | | | commit 0b57d7602b68f7b2786b2f0e22da39cbd4139a95 upstream. wait_for_completion_interruptible_timeout() may return negative value. In this case, checking if (t > 0) will return true if t is unsigned. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: (coretemp) Fix oops on driver loadJean Delvare2011-12-091-0/+2
| | | | | | | | | | | | | | | | This is for stable kernel branch 3.0 only. Previous and later versions have different code paths and are not affected by this bug. If the CPU microcode is too old, the coretemp driver won't work. But instead of failing gracefully, it currently oops. Check for NULL platform device data to avoid this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Durgadoss R <durgadoss.r@intel.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: (w83627ehf) Fix broken driver initGuenter Roeck2011-11-111-3/+6
| | | | | | | | | | | | | | | | | | | | commit bfa02b0da66965caf46e441270af87edda4fea14 upstream. Commit 2265cef2 (hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor types) results in kernel panic if data->temp_label was not initialized. The problem was found with chip W83627DHG-P. Add check if data->temp->label was set before use. Based on incomplete patch by Alexander Beregalov. Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor typesJean Delvare2011-11-111-1/+8
| | | | | | | | | | | | | commit 2265cef2751b3441df91f85e0107f9f549e5b711 upstream. When temperature sources are PECI or AMD-SI agents, it makes no sense to report their type as diode or thermistor. Instead we must report their digital nature. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: (coretemp) Fix for non-SMP buildsJean Delvare2011-11-111-2/+1
| | | | | | | | | | | | | | | | | | commit 2aba6cac2a84f3b80e11a680c34d55e7739b474d upstream. The definition of TO_ATTR_NO in the non-SMP case is wrong. As the SMP definition resolves to the correct value, just use this for both cases. Without this fix the temperature attributes are named temp0_* instead of temp2_*, so libsensors won't pick them. Broken since kernel 3.0. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Phil Sutter <phil@nwl.cc> Acked-by: Durgadoss R <Durgadoss.r@intel.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: (w83627ehf) Fix negative 8-bit temperature valuesJean Delvare2011-10-251-2/+3
| | | | | | | | | | | | | | | commit 133d324d82e144588939ad25b732b5b6c33b03d9 upstream. Since 8-bit temperature values are now handled in 16-bit struct members, values have to be cast to s8 for negative temperatures to be properly handled. This is broken since kernel version 2.6.39 (commit bce26c58df86599c9570cee83eac58bdaae760e4.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: (w83627ehf) Properly report thermal diode sensorsJean Delvare2011-10-251-4/+11
| | | | | | | | | | | | | | | | | | | commit bf164c58e58328c40ebc597a8ac00cc6840f9703 upstream. The w83627ehf driver is improperly reporting thermal diode sensors as type 2, instead of 3. This caused "sensors" and possibly other monitoring tools to report these sensors as "transistor" instead of "thermal diode". Furthermore, diode subtype selection (CPU vs. external) is only supported by the original W83627EHF/EHG. All later models only support CPU diode type, and some (NCT6776F) don't even have the register in question so we should avoid reading from it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: (ds620) Fix handling of negative temperaturesRoland Stigge2011-10-031-1/+1
| | | | | | | | | | | commit cc41d586e8b4d76164fe7731c1c49be6cc5fc7e6 upstream. Signed (negative) temperatures were not handled correctly. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: (max16065) Fix current calculationGuenter Roeck2011-10-031-1/+1
| | | | | | | | | | | commit ff71c182f461da5ae9d2d65f8a63f5a9193b9be1 upstream. Current calculation is completely wrong. Add missing brackets to fix it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: (ibmaem) add missing kfreeJulia Lawall2011-08-171-5/+10
| | | | | | | | | | | | | commit 66a89b2164e2d30661edbd1953eacf0594d8203a upstream. rs_resp is dynamically allocated in aem_read_sensor(), so it should be freed before exiting in every case. This collects the kfree and the return at the end of the function. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: (max1111) Fix race condition causing NULL pointer exceptionPavel Herrmann2011-07-171-0/+11
| | | | | | | | | | | | | | | spi_sync call uses its spi_message parameter to keep completion information, using a drvdata structure is not thread-safe. Use a mutex to prevent multiple access to shared driver data. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Cyril Hrubis <metan@ucw.cz> Tested-by: Stanislav Brabec <utx@penguin.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
* hwmon: (it87) Fix label group removalJean Delvare2011-07-171-1/+1
| | | | | | | | | | | A copy-and-paste error caused it87_attributes_vid to be referenced where it87_attributes_label should be. Thankfully the group is only used for attribute removal, not attribute creation, so the effects of this bug are limited, but let's fix it still. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (asus_atk0110) Fix memory leakLuca Tettamanti2011-07-171-0/+1
| | | | | | | | | The object returned by atk_gitm is dynamically allocated and must be freed. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
* hwmon: (adm1275) Fix coefficients per datasheet revision BGuenter Roeck2011-07-151-5/+5
| | | | | | | | | Coefficients to convert chip register values to voltage/current have been slightly changed in revision B of the chip datasheet. Update driver coefficients to match the coefficients in the datasheet. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (pmbus) Use long variables for register to data conversionsGuenter Roeck2011-07-121-10/+10
| | | | | | | | | | Using integer variable types for register to data conversions can cause overflows especially for power calculations, which are in microwatt. Use long variables instead. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.39+
* hwmon: (pmbus) Improve auto-detection of temperature status registerGuenter Roeck2011-07-101-5/+6
| | | | | | | | | | | It is possible that a PMBus device supports the READ_TEMPERATURE2 and/or READ_TEMPERATURE3 registers but does not support READ_TEMPERATURE1. Improve temperature status register detection to address this condition. Reported-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.39+
* hwmon: (lm95241) Fix negative temperature resultsGuenter Roeck2011-07-101-6/+14
| | | | | | | | | | | | | Negative temperatures were returned in degrees C instead of milli-Degrees C. Also, negative temperatures were reported for remote temperature sensors even if the chip was configured for positive-only results. Fix by detecting temperature modes, and by treating negative temperatures similar to positive temperatures, with appropriate sign extension. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.30+
* hwmon: (lm95241) Fix chip detection codeGuenter Roeck2011-07-081-1/+1
| | | | | | | | | | | | The LM95241 driver accepts every chip ID equal to or larger than 0xA4 as its own, and other chips such as LM95245 use chip IDs in the accepted ID range. This results in false chip detection. Fix problem by accepting only the known LM95241 chip ID. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.30+
View Lorry Controller Status