summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/k2l.dtsi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: keystone: Update SoC specific compatible flagsNishanth Menon2015-10-061-0/+3
| | | | | | | Update the compatible flags to allow specific SoC identification. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
* ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific fileMurali Karicheri2015-08-131-5/+11
| | | | | | | | | Currently mdio bindings are defined in keystone.dtsi and this results in incorrect unit address for the node on K2E and K2L SoCs. Fix this by moving them to SoC specific DTS file. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
* ARM: dts: k2l-evm: Add device bindings for netcp driverMurali Karicheri2015-06-101-0/+1
| | | | | | | | | | | | This patch enables networking on k2l evm by providing device bindings for netcp, knav, and qmss. See device binding documentation at Documentation/devicetree/bindings/net/keystone-netcp.txt Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
* ARM: dts: keystone-k2l: fix mdio io start addressGrygorii Strashko2014-10-011-0/+4
| | | | | | | | The K2L MDIO io space has different start address. Hence, fix it to be 0x26200f00 according to TRM. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: keystone: k2l: Fix chip selects for SPI devicesKaricheri Muralidharan2014-09-221-0/+14
| | | | | | | | | | There are 5 chip selects per SPI0 and SPI2 and 3 per SPI1. SPI2 needs to be pinned out to use and by default they are disabled. So keep the state disabled to reflect default. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: keystone: add dsp gpio controllers nodesGrygorii Strashko2014-09-221-0/+28
| | | | | | | | | | | | | Add Keystone 2 DSP GPIO nodes for SoCs: k2hk: DSP GPIO banks 0-7 correspond to DSP0-DSP7 k2l: DSP GPIO banks 0-3 correspond to DSP0-DSP3 k2e: DSP GPIO bank 0 corresponds to DSP0 Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dts: keystone: add support for K2 Lamarr SoC and EVMMurali Karicheri2014-02-261-0/+55
Keystone2 Lamarr (K2L) is a dual Cortex A15 core based SoC with 4 DSPs. It has standard peripherals such as i2c, spi, uart, timer, pcie etc., similar to k2hk, but different set of wireless hardware. This patch add support for k2 Lamarr SoC and EVM. This re-uses the common keystone.dtsi to include common bindings across the various k2 devices. Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
View Lorry Controller Status