diff options
Diffstat (limited to 'drivers/staging/brcm80211/include/wlioctl.h')
| -rw-r--r-- | drivers/staging/brcm80211/include/wlioctl.h | 1365 |
1 files changed, 0 insertions, 1365 deletions
diff --git a/drivers/staging/brcm80211/include/wlioctl.h b/drivers/staging/brcm80211/include/wlioctl.h deleted file mode 100644 index 2876bd9eff85..000000000000 --- a/drivers/staging/brcm80211/include/wlioctl.h +++ /dev/null @@ -1,1365 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _wlioctl_h_ -#define _wlioctl_h_ - -#include <linux/ieee80211.h> -#ifdef BRCM_FULLMAC -#include <proto/bcmeth.h> -#endif -#include <proto/bcmevent.h> -#include <proto/802.11.h> -#include <bcmwifi.h> - -#ifndef INTF_NAME_SIZ -#define INTF_NAME_SIZ 16 -#endif - -#ifdef BRCM_FULLMAC - -#define WL_BSS_INFO_VERSION 108 /* current ver of wl_bss_info struct */ - -/* BSS info structure - * Applications MUST CHECK ie_offset field and length field to access IEs and - * next bss_info structure in a vector (in wl_scan_results_t) - */ -typedef struct wl_bss_info { - u32 version; /* version field */ - u32 length; /* byte length of data in this record, - * starting at version and including IEs - */ - u8 BSSID[ETH_ALEN]; - u16 beacon_period; /* units are Kusec */ - u16 capability; /* Capability information */ - u8 SSID_len; - u8 SSID[32]; - struct { - uint count; /* # rates in this set */ - u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ - } rateset; /* supported rates */ - chanspec_t chanspec; /* chanspec for bss */ - u16 atim_window; /* units are Kusec */ - u8 dtim_period; /* DTIM period */ - s16 RSSI; /* receive signal strength (in dBm) */ - s8 phy_noise; /* noise (in dBm) */ - - u8 n_cap; /* BSS is 802.11N Capable */ - u32 nbss_cap; /* 802.11N BSS Capabilities (based on HT_CAP_*) */ - u8 ctl_ch; /* 802.11N BSS control channel number */ - u32 reserved32[1]; /* Reserved for expansion of BSS properties */ - u8 flags; /* flags */ - u8 reserved[3]; /* Reserved for expansion of BSS properties */ - u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */ - - u16 ie_offset; /* offset at which IEs start, from beginning */ - u32 ie_length; /* byte length of Information Elements */ - s16 SNR; /* average SNR of during frame reception */ - /* Add new fields here */ - /* variable length Information Elements */ -} wl_bss_info_t; -#endif /* BRCM_FULLMAC */ - -typedef struct wlc_ssid { - u32 SSID_len; - unsigned char SSID[32]; -} wlc_ssid_t; - -#ifdef BRCM_FULLMAC -typedef struct chan_scandata { - u8 txpower; - u8 pad; - chanspec_t channel; /* Channel num, bw, ctrl_sb and band */ - u32 channel_mintime; - u32 channel_maxtime; -} chan_scandata_t; - -typedef enum wl_scan_type { - EXTDSCAN_FOREGROUND_SCAN, - EXTDSCAN_BACKGROUND_SCAN, - EXTDSCAN_FORCEDBACKGROUND_SCAN -} wl_scan_type_t; - -#define WLC_EXTDSCAN_MAX_SSID 5 - -#define WL_BSS_FLAGS_FROM_BEACON 0x01 /* bss_info derived from beacon */ -#define WL_BSS_FLAGS_FROM_CACHE 0x02 /* bss_info collected from cache */ -#define WL_BSS_FLAGS_RSSI_ONCHANNEL 0x04 /* rssi info was received on channel (vs offchannel) */ - -typedef struct wl_extdscan_params { - s8 nprobes; /* 0, passive, otherwise active */ - s8 split_scan; /* split scan */ - s8 band; /* band */ - s8 pad; - wlc_ssid_t ssid[WLC_EXTDSCAN_MAX_SSID]; /* ssid list */ - u32 tx_rate; /* in 500ksec units */ - wl_scan_type_t scan_type; /* enum */ - s32 channel_num; - chan_scandata_t channel_list[1]; /* list of chandata structs */ -} wl_extdscan_params_t; - -#define WL_EXTDSCAN_PARAMS_FIXED_SIZE (sizeof(wl_extdscan_params_t) - sizeof(chan_scandata_t)) - -#define WL_BSSTYPE_INFRA 1 -#define WL_BSSTYPE_INDEP 0 -#define WL_BSSTYPE_ANY 2 - -/* Bitmask for scan_type */ -#define WL_SCANFLAGS_PASSIVE 0x01 /* force passive scan */ -#define WL_SCANFLAGS_RESERVED 0x02 /* Reserved */ -#define WL_SCANFLAGS_PROHIBITED 0x04 /* allow scanning prohibited channels */ - -typedef struct wl_scan_params { - wlc_ssid_t ssid; /* default: {0, ""} */ - u8 bssid[ETH_ALEN]; /* default: bcast */ - s8 bss_type; /* default: any, - * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT - */ - u8 scan_type; /* flags, 0 use default */ - s32 nprobes; /* -1 use default, number of probes per channel */ - s32 active_time; /* -1 use default, dwell time per channel for - * active scanning - */ - s32 passive_time; /* -1 use default, dwell time per channel - * for passive scanning - */ - s32 home_time; /* -1 use default, dwell time for the home channel - * between channel scans - */ - s32 channel_num; /* count of channels and ssids that follow - * - * low half is count of channels in channel_list, 0 - * means default (use all available channels) - * - * high half is entries in wlc_ssid_t array that - * follows channel_list, aligned for s32 (4 bytes) - * meaning an odd channel count implies a 2-byte pad - * between end of channel_list and first ssid - * - * if ssid count is zero, single ssid in the fixed - * parameter portion is assumed, otherwise ssid in - * the fixed portion is ignored - */ - u16 channel_list[1]; /* list of chanspecs */ -} wl_scan_params_t; - -/* size of wl_scan_params not including variable length array */ -#define WL_SCAN_PARAMS_FIXED_SIZE 64 - -/* masks for channel and ssid count */ -#define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff -#define WL_SCAN_PARAMS_NSSID_SHIFT 16 - -#define WL_SCAN_ACTION_START 1 -#define WL_SCAN_ACTION_CONTINUE 2 -#define WL_SCAN_ACTION_ABORT 3 - -#define ISCAN_REQ_VERSION 1 - -/* incremental scan struct */ -typedef struct wl_iscan_params { - u32 version; - u16 action; - u16 scan_duration; - wl_scan_params_t params; -} wl_iscan_params_t; - -/* 3 fields + size of wl_scan_params, not including variable length array */ -#define WL_ISCAN_PARAMS_FIXED_SIZE (offsetof(wl_iscan_params_t, params) + sizeof(wlc_ssid_t)) - -typedef struct wl_scan_results { - u32 buflen; - u32 version; - u32 count; - wl_bss_info_t bss_info[1]; -} wl_scan_results_t; - -/* size of wl_scan_results not including variable length array */ -#define WL_SCAN_RESULTS_FIXED_SIZE (sizeof(wl_scan_results_t) - sizeof(wl_bss_info_t)) - -/* wl_iscan_results status values */ -#define WL_SCAN_RESULTS_SUCCESS 0 -#define WL_SCAN_RESULTS_PARTIAL 1 -#define WL_SCAN_RESULTS_PENDING 2 -#define WL_SCAN_RESULTS_ABORTED 3 -#define WL_SCAN_RESULTS_NO_MEM 4 - -#define ESCAN_REQ_VERSION 1 - -typedef struct wl_escan_params { - u32 version; - u16 action; - u16 sync_id; - wl_scan_params_t params; -} wl_escan_params_t; - -#define WL_ESCAN_PARAMS_FIXED_SIZE (offsetof(wl_escan_params_t, params) + sizeof(wlc_ssid_t)) - -typedef struct wl_escan_result { - u32 buflen; - u32 version; - u16 sync_id; - u16 bss_count; - wl_bss_info_t bss_info[1]; -} wl_escan_result_t; - -#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(wl_escan_result_t) - sizeof(wl_bss_info_t)) - -/* incremental scan results struct */ -typedef struct wl_iscan_results { - u32 status; - wl_scan_results_t results; -} wl_iscan_results_t; - -/* size of wl_iscan_results not including variable length array */ -#define WL_ISCAN_RESULTS_FIXED_SIZE \ - (WL_SCAN_RESULTS_FIXED_SIZE + offsetof(wl_iscan_results_t, results)) - -typedef struct wl_probe_params { - wlc_ssid_t ssid; - u8 bssid[ETH_ALEN]; - u8 mac[ETH_ALEN]; -} wl_probe_params_t; -#endif /* BRCM_FULLMAC */ - -#define WL_NUMRATES 16 /* max # of rates in a rateset */ -typedef struct wl_rateset { - u32 count; /* # rates in this set */ - u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ -} wl_rateset_t; - -#ifdef BRCM_FULLMAC -typedef struct wl_rateset_args { - u32 count; /* # rates in this set */ - u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ - u8 mcs[MCSSET_LEN]; /* supported mcs index bit map */ -} wl_rateset_args_t; - -/* u32 list */ -typedef struct wl_u32_list { - /* in - # of elements, out - # of entries */ - u32 count; - /* variable length u32 list */ - u32 element[1]; -} wl_u32_list_t; - -/* used for association with a specific BSSID and chanspec list */ -typedef struct wl_assoc_params { - u8 bssid[ETH_ALEN]; /* 00:00:00:00:00:00: broadcast scan */ - u16 bssid_cnt; - s32 chanspec_num; /* 0: all available channels, - * otherwise count of chanspecs in chanspec_list - */ - chanspec_t chanspec_list[1]; /* list of chanspecs */ -} wl_assoc_params_t; -#define WL_ASSOC_PARAMS_FIXED_SIZE (sizeof(wl_assoc_params_t) - sizeof(chanspec_t)) - -/* used for reassociation/roam to a specific BSSID and channel */ -typedef wl_assoc_params_t wl_reassoc_params_t; -#define WL_REASSOC_PARAMS_FIXED_SIZE WL_ASSOC_PARAMS_FIXED_SIZE - -/* used for join with or without a specific bssid and channel list */ -typedef struct wl_join_params { - wlc_ssid_t ssid; - wl_assoc_params_t params; /* optional field, but it must include the fixed portion - * of the wl_assoc_params_t struct when it does present. - */ -} wl_join_params_t; -#define WL_JOIN_PARAMS_FIXED_SIZE (sizeof(wl_join_params_t) - sizeof(chanspec_t)) - -#endif /* BRCM_FULLMAC */ - -/* defines used by the nrate iovar */ -#define NRATE_MCS_INUSE 0x00000080 /* MSC in use,indicates b0-6 holds an mcs */ -#define NRATE_RATE_MASK 0x0000007f /* rate/mcs value */ -#define NRATE_STF_MASK 0x0000ff00 /* stf mode mask: siso, cdd, stbc, sdm */ -#define NRATE_STF_SHIFT 8 /* stf mode shift */ -#define NRATE_OVERRIDE 0x80000000 /* bit indicates override both rate & mode */ -#define NRATE_OVERRIDE_MCS_ONLY 0x40000000 /* bit indicate to override mcs only */ -#define NRATE_SGI_MASK 0x00800000 /* sgi mode */ -#define NRATE_SGI_SHIFT 23 /* sgi mode */ -#define NRATE_LDPC_CODING 0x00400000 /* bit indicates adv coding in use */ -#define NRATE_LDPC_SHIFT 22 /* ldpc shift */ - -#define NRATE_STF_SISO 0 /* stf mode SISO */ -#define NRATE_STF_CDD 1 /* stf mode CDD */ -#define NRATE_STF_STBC 2 /* stf mode STBC */ -#define NRATE_STF_SDM 3 /* stf mode SDM */ - -#define ANTENNA_NUM_1 1 /* total number of antennas to be used */ -#define ANTENNA_NUM_2 2 -#define ANTENNA_NUM_3 3 -#define ANTENNA_NUM_4 4 - -#define ANT_SELCFG_AUTO 0x80 /* bit indicates antenna sel AUTO */ -#define ANT_SELCFG_MASK 0x33 /* antenna configuration mask */ -#define ANT_SELCFG_MAX 4 /* max number of antenna configurations */ -#define ANT_SELCFG_TX_UNICAST 0 /* unicast tx antenna configuration */ -#define ANT_SELCFG_RX_UNICAST 1 /* unicast rx antenna configuration */ -#define ANT_SELCFG_TX_DEF 2 /* default tx antenna configuration */ -#define ANT_SELCFG_RX_DEF 3 /* default rx antenna configuration */ - -#define MAX_STREAMS_SUPPORTED 4 /* max number of streams supported */ - -typedef struct { - u8 ant_config[ANT_SELCFG_MAX]; /* antenna configuration */ - u8 num_antcfg; /* number of available antenna configurations */ -} wlc_antselcfg_t; - -#define HIGHEST_SINGLE_STREAM_MCS 7 /* MCS values greater than this enable multiple streams */ - -#ifdef BRCM_FULLMAC -#define MAX_CCA_CHANNELS 38 /* Max number of 20 Mhz wide channels */ -#define MAX_CCA_SECS 60 /* CCA keeps this many seconds history */ - -#define IBSS_MED 15 /* Mediom in-bss congestion percentage */ -#define IBSS_HI 25 /* Hi in-bss congestion percentage */ -#define OBSS_MED 12 -#define OBSS_HI 25 -#define INTERFER_MED 5 -#define INTERFER_HI 10 - -#define CCA_FLAG_2G_ONLY 0x01 /* Return a channel from 2.4 Ghz band */ -#define CCA_FLAG_5G_ONLY 0x02 /* Return a channel from 2.4 Ghz band */ -#define CCA_FLAG_IGNORE_DURATION 0x04 /* Ignore dwell time for each channel */ -#define CCA_FLAGS_PREFER_1_6_11 0x10 -#define CCA_FLAG_IGNORE_INTERFER 0x20 /* do not exlude channel based on interfer level */ - -#define CCA_ERRNO_BAND 1 /* After filtering for band pref, no choices left */ -#define CCA_ERRNO_DURATION 2 /* After filtering for duration, no choices left */ -#define CCA_ERRNO_PREF_CHAN 3 /* After filtering for chan pref, no choices left */ -#define CCA_ERRNO_INTERFER 4 /* After filtering for interference, no choices left */ -#define CCA_ERRNO_TOO_FEW 5 /* Only 1 channel was input */ - -typedef struct { - u32 duration; /* millisecs spent sampling this channel */ - u32 congest_ibss; /* millisecs in our bss (presumably this traffic will */ - /* move if cur bss moves channels) */ - u32 congest_obss; /* traffic not in our bss */ - u32 interference; /* millisecs detecting a non 802.11 interferer. */ - u32 timestamp; /* second timestamp */ -} cca_congest_t; - -typedef struct { - chanspec_t chanspec; /* Which channel? */ - u8 num_secs; /* How many secs worth of data */ - cca_congest_t secs[1]; /* Data */ -} cca_congest_channel_req_t; - -#endif /* BRCM_FULLMAC */ - -#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NUL */ - -#ifdef BRCM_FULLMAC -typedef struct wl_country { - char country_abbrev[WLC_CNTRY_BUF_SZ]; /* nul-terminated country code used in - * the Country IE - */ - s32 rev; /* revision specifier for ccode - * on set, -1 indicates unspecified. - * on get, rev >= 0 - */ - char ccode[WLC_CNTRY_BUF_SZ]; /* nul-terminated built-in country code. - * variable length, but fixed size in - * struct allows simple allocation for - * expected country strings <= 3 chars. - */ -} wl_country_t; - -typedef struct wl_channels_in_country { - u32 buflen; - u32 band; - char country_abbrev[WLC_CNTRY_BUF_SZ]; - u32 count; - u32 channel[1]; -} wl_channels_in_country_t; - -typedef struct wl_country_list { - u32 buflen; - u32 band_set; - u32 band; - u32 count; - char country_abbrev[1]; -} wl_country_list_t; - -#define WL_NUM_RPI_BINS 8 -#define WL_RM_TYPE_BASIC 1 -#define WL_RM_TYPE_CCA 2 -#define WL_RM_TYPE_RPI 3 - -#define WL_RM_FLAG_PARALLEL (1<<0) - -#define WL_RM_FLAG_LATE (1<<1) -#define WL_RM_FLAG_INCAPABLE (1<<2) -#define WL_RM_FLAG_REFUSED (1<<3) - -typedef struct wl_rm_req_elt { - s8 type; - s8 flags; - chanspec_t chanspec; - u32 token; /* token for this measurement */ - u32 tsf_h; /* TSF high 32-bits of Measurement start time */ - u32 tsf_l; /* TSF low 32-bits */ - u32 dur; /* TUs */ -} wl_rm_req_elt_t; - -typedef struct wl_rm_req { - u32 token; /* overall measurement set token */ - u32 count; /* number of measurement requests */ - void *cb; /* completion callback function: may be NULL */ - void *cb_arg; /* arg to completion callback function */ - wl_rm_req_elt_t req[1]; /* variable length block of requests */ -} wl_rm_req_t; -#define WL_RM_REQ_FIXED_LEN offsetof(wl_rm_req_t, req) - -typedef struct wl_rm_rep_elt { - s8 type; - s8 flags; - chanspec_t chanspec; - u32 token; /* token for this measurement */ - u32 tsf_h; /* TSF high 32-bits of Measurement start time */ - u32 tsf_l; /* TSF low 32-bits */ - u32 dur; /* TUs */ - u32 len; /* byte length of data block */ - u8 data[1]; /* variable length data block */ -} wl_rm_rep_elt_t; -#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */ - -#define WL_RPI_REP_BIN_NUM 8 -typedef struct wl_rm_rpi_rep { - u8 rpi[WL_RPI_REP_BIN_NUM]; - s8 rpi_max[WL_RPI_REP_BIN_NUM]; -} wl_rm_rpi_rep_t; - -typedef struct wl_rm_rep { - u32 token; /* overall measurement set token */ - u32 len; /* length of measurement report block */ - wl_rm_rep_elt_t rep[1]; /* variable length block of reports */ -} wl_rm_rep_t; -#define WL_RM_REP_FIXED_LEN 8 -#endif /* BRCM_FULLMAC */ - -/* Enumerate crypto algorithms */ -#define CRYPTO_ALGO_OFF 0 -#define CRYPTO_ALGO_WEP1 1 -#define CRYPTO_ALGO_TKIP 2 -#define CRYPTO_ALGO_WEP128 3 -#define CRYPTO_ALGO_AES_CCM 4 -#define CRYPTO_ALGO_AES_RESERVED1 5 -#define CRYPTO_ALGO_AES_RESERVED2 6 -#define CRYPTO_ALGO_NALG 7 - -#define WSEC_GEN_MIC_ERROR 0x0001 -#define WSEC_GEN_REPLAY 0x0002 -#define WSEC_GEN_ICV_ERROR 0x0004 - -#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */ -#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ -#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */ -#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */ -#define WL_IBSS_PEER_GROUP_KEY (1 << 6) /* Indicates a group key for a IBSS PEER */ - -typedef struct wl_wsec_key { - u32 index; /* key index */ - u32 len; /* key length */ - u8 data[WLAN_MAX_KEY_LEN]; /* key data */ - u32 pad_1[18]; - u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ - u32 flags; /* misc flags */ - u32 pad_2[2]; - int pad_3; - int iv_initialized; /* has IV been initialized already? */ - int pad_4; - /* Rx IV */ - struct { - u32 hi; /* upper 32 bits of IV */ - u16 lo; /* lower 16 bits of IV */ - } rxiv; - u32 pad_5[2]; - u8 ea[ETH_ALEN]; /* per station */ -} wl_wsec_key_t; - -#define WSEC_MIN_PSK_LEN 8 -#define WSEC_MAX_PSK_LEN 64 - -/* Flag for key material needing passhash'ing */ -#define WSEC_PASSPHRASE (1<<0) - -/* receptacle for WLC_SET_WSEC_PMK parameter */ -typedef struct { - unsigned short key_len; /* octets in key material */ - unsigned short flags; /* key handling qualification */ - u8 key[WSEC_MAX_PSK_LEN]; /* PMK material */ -} wsec_pmk_t; - -/* wireless security bitvec */ -#define WEP_ENABLED 0x0001 -#define TKIP_ENABLED 0x0002 -#define AES_ENABLED 0x0004 -#define WSEC_SWFLAG 0x0008 -#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */ - -/* WPA authentication mode bitvec */ -#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */ -#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */ -#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */ -#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */ -#define WPA_AUTH_RESERVED1 0x0008 -#define WPA_AUTH_RESERVED2 0x0010 - /* #define WPA_AUTH_8021X 0x0020 *//* 802.1x, reserved */ -#define WPA2_AUTH_RESERVED1 0x0020 -#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */ -#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */ -#define WPA2_AUTH_RESERVED3 0x0200 -#define WPA2_AUTH_RESERVED4 0x0400 -#define WPA2_AUTH_RESERVED5 0x0800 - -/* pmkid */ -#define MAXPMKID 16 - -typedef struct _pmkid { - u8 BSSID[ETH_ALEN]; - u8 PMKID[WLAN_PMKID_LEN]; -} pmkid_t; - -typedef struct _pmkid_list { - u32 npmkid; - pmkid_t pmkid[1]; -} pmkid_list_t; - -typedef struct _pmkid_cand { - u8 BSSID[ETH_ALEN]; - u8 preauth; -} pmkid_cand_t; - -typedef struct _pmkid_cand_list { - u32 npmkid_cand; - pmkid_cand_t pmkid_cand[1]; -} pmkid_cand_list_t; - -typedef struct wl_led_info { - u32 index; /* led index */ - u32 behavior; - u8 activehi; -} wl_led_info_t; - -/* R_REG and W_REG struct passed through ioctl */ -typedef struct { - u32 byteoff; /* byte offset of the field in d11regs_t */ - u32 val; /* read/write value of the field */ - u32 size; /* sizeof the field */ - uint band; /* band (optional) */ -} rw_reg_t; - - -#ifdef BRCM_FULLMAC -/* Used to get specific STA parameters */ -typedef struct { - u32 val; - u8 ea[ETH_ALEN]; -} scb_val_t; -#endif /* BRCM_FULLMAC */ - -/* channel encoding */ -typedef struct channel_info { - int hw_channel; - int target_channel; - int scan_channel; -} channel_info_t; - -/* For ioctls that take a list of MAC addresses */ -struct maclist { - uint count; /* number of MAC addresses */ - u8 ea[1][ETH_ALEN]; /* variable length array of MAC addresses */ -}; - -#ifdef BRCM_FULLMAC -/* Linux network driver ioctl encoding */ -typedef struct wl_ioctl { - uint cmd; /* common ioctl definition */ - void *buf; /* pointer to user buffer */ - uint len; /* length of user buffer */ - u8 set; /* get or set request (optional) */ - uint used; /* bytes read or written (optional) */ - uint needed; /* bytes needed (optional) */ -} wl_ioctl_t; -#endif /* BRCM_FULLMAC */ - - -/* - * Structure for passing hardware and software - * revision info up from the driver. - */ -typedef struct wlc_rev_info { - uint vendorid; /* PCI vendor id */ - uint deviceid; /* device id of chip */ - uint radiorev; /* radio revision */ - uint chiprev; /* chip revision */ - uint corerev; /* core revision */ - uint boardid; /* board identifier (usu. PCI sub-device id) */ - uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ - uint boardrev; /* board revision */ - uint driverrev; /* driver version */ - uint ucoderev; /* microcode version */ - uint bus; /* bus type */ - uint chipnum; /* chip number */ - uint phytype; /* phy type */ - uint phyrev; /* phy revision */ - uint anarev; /* anacore rev */ - uint chippkg; /* chip package info */ -} wlc_rev_info_t; - -#define WL_REV_INFO_LEGACY_LENGTH 48 - -#ifdef BRCM_FULLMAC -#define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */ -#define WLC_IOCTL_MEDLEN 1536 /* "med" length ioctl buffer required */ -#define WLC_IOCTL_MAXLEN 8192 -#endif - -/* common ioctl definitions */ -#define WLC_GET_MAGIC 0 -#define WLC_GET_VERSION 1 -#define WLC_UP 2 -#define WLC_DOWN 3 -#define WLC_GET_LOOP 4 -#define WLC_SET_LOOP 5 -#define WLC_DUMP 6 -#define WLC_GET_MSGLEVEL 7 -#define WLC_SET_MSGLEVEL 8 -#define WLC_GET_PROMISC 9 -#define WLC_SET_PROMISC 10 -#define WLC_OVERLAY_IOCTL 11 -#define WLC_GET_RATE 12 - /* #define WLC_SET_RATE 13 *//* no longer supported */ -#define WLC_GET_INSTANCE 14 - /* #define WLC_GET_FRAG 15 *//* no longer supported */ - /* #define WLC_SET_FRAG 16 *//* no longer supported */ - /* #define WLC_GET_RTS 17 *//* no longer supported */ - /* #define WLC_SET_RTS 18 *//* no longer supported */ -#define WLC_GET_INFRA 19 -#define WLC_SET_INFRA 20 -#define WLC_GET_AUTH 21 -#define WLC_SET_AUTH 22 -#define WLC_GET_BSSID 23 -#define WLC_SET_BSSID 24 -#define WLC_GET_SSID 25 -#define WLC_SET_SSID 26 -#define WLC_RESTART 27 - /* #define WLC_DUMP_SCB 28 *//* no longer supported */ -#define WLC_GET_CHANNEL 29 -#define WLC_SET_CHANNEL 30 -#define WLC_GET_SRL 31 -#define WLC_SET_SRL 32 -#define WLC_GET_LRL 33 -#define WLC_SET_LRL 34 -#define WLC_GET_PLCPHDR 35 -#define WLC_SET_PLCPHDR 36 -#define WLC_GET_RADIO 37 -#define WLC_SET_RADIO 38 -#define WLC_GET_PHYTYPE 39 -#define WLC_DUMP_RATE 40 -#define WLC_SET_RATE_PARAMS 41 -#define WLC_GET_FIXRATE 42 -#define WLC_SET_FIXRATE 43 - /* #define WLC_GET_WEP 42 *//* no longer supported */ - /* #define WLC_SET_WEP 43 *//* no longer supported */ -#define WLC_GET_KEY 44 -#define WLC_SET_KEY 45 -#define WLC_GET_REGULATORY 46 -#define WLC_SET_REGULATORY 47 -#define WLC_GET_PASSIVE_SCAN 48 -#define WLC_SET_PASSIVE_SCAN 49 -#define WLC_SCAN 50 -#define WLC_SCAN_RESULTS 51 -#define WLC_DISASSOC 52 -#define WLC_REASSOC 53 -#define WLC_GET_ROAM_TRIGGER 54 -#define WLC_SET_ROAM_TRIGGER 55 -#define WLC_GET_ROAM_DELTA 56 -#define WLC_SET_ROAM_DELTA 57 -#define WLC_GET_ROAM_SCAN_PERIOD 58 -#define WLC_SET_ROAM_SCAN_PERIOD 59 -#define WLC_EVM 60 /* diag */ -#define WLC_GET_TXANT 61 -#define WLC_SET_TXANT 62 -#define WLC_GET_ANTDIV 63 -#define WLC_SET_ANTDIV 64 - /* #define WLC_GET_TXPWR 65 *//* no longer supported */ - /* #define WLC_SET_TXPWR 66 *//* no longer supported */ -#define WLC_GET_CLOSED 67 -#define WLC_SET_CLOSED 68 -#define WLC_GET_MACLIST 69 -#define WLC_SET_MACLIST 70 -#define WLC_GET_RATESET 71 -#define WLC_SET_RATESET 72 - /* #define WLC_GET_LOCALE 73 *//* no longer supported */ -#define WLC_LONGTRAIN 74 -#define WLC_GET_BCNPRD 75 -#define WLC_SET_BCNPRD 76 -#define WLC_GET_DTIMPRD 77 -#define WLC_SET_DTIMPRD 78 -#define WLC_GET_SROM 79 -#define WLC_SET_SROM 80 -#define WLC_GET_WEP_RESTRICT 81 -#define WLC_SET_WEP_RESTRICT 82 -#define WLC_GET_COUNTRY 83 -#define WLC_SET_COUNTRY 84 -#define WLC_GET_PM 85 -#define WLC_SET_PM 86 -#define WLC_GET_WAKE 87 -#define WLC_SET_WAKE 88 - /* #define WLC_GET_D11CNTS 89 *//* -> "counters" iovar */ -#define WLC_GET_FORCELINK 90 /* ndis only */ -#define WLC_SET_FORCELINK 91 /* ndis only */ -#define WLC_FREQ_ACCURACY 92 /* diag */ -#define WLC_CARRIER_SUPPRESS 93 /* diag */ -#define WLC_GET_PHYREG 94 -#define WLC_SET_PHYREG 95 -#define WLC_GET_RADIOREG 96 -#define WLC_SET_RADIOREG 97 -#define WLC_GET_REVINFO 98 -#define WLC_GET_UCANTDIV 99 -#define WLC_SET_UCANTDIV 100 -#define WLC_R_REG 101 -#define WLC_W_REG 102 -/* #define WLC_DIAG_LOOPBACK 103 old tray diag */ - /* #define WLC_RESET_D11CNTS 104 *//* -> "reset_d11cnts" iovar */ -#define WLC_GET_MACMODE 105 -#define WLC_SET_MACMODE 106 -#define WLC_GET_MONITOR 107 -#define WLC_SET_MONITOR 108 -#define WLC_GET_GMODE 109 -#define WLC_SET_GMODE 110 -#define WLC_GET_LEGACY_ERP 111 -#define WLC_SET_LEGACY_ERP 112 -#define WLC_GET_RX_ANT 113 -#define WLC_GET_CURR_RATESET 114 /* current rateset */ -#define WLC_GET_SCANSUPPRESS 115 -#define WLC_SET_SCANSUPPRESS 116 -#define WLC_GET_AP 117 -#define WLC_SET_AP 118 -#define WLC_GET_EAP_RESTRICT 119 -#define WLC_SET_EAP_RESTRICT 120 -#define WLC_SCB_AUTHORIZE 121 -#define WLC_SCB_DEAUTHORIZE 122 -#define WLC_GET_WDSLIST 123 -#define WLC_SET_WDSLIST 124 -#define WLC_GET_ATIM 125 -#define WLC_SET_ATIM 126 -#define WLC_GET_RSSI 127 -#define WLC_GET_PHYANTDIV 128 -#define WLC_SET_PHYANTDIV 129 -#define WLC_AP_RX_ONLY 130 -#define WLC_GET_TX_PATH_PWR 131 -#define WLC_SET_TX_PATH_PWR 132 -#define WLC_GET_WSEC 133 -#define WLC_SET_WSEC 134 -#define WLC_GET_PHY_NOISE 135 -#define WLC_GET_BSS_INFO 136 -#define WLC_GET_PKTCNTS 137 -#define WLC_GET_LAZYWDS 138 -#define WLC_SET_LAZYWDS 139 -#define WLC_GET_BANDLIST 140 -#define WLC_GET_BAND 141 -#define WLC_SET_BAND 142 -#define WLC_SCB_DEAUTHENTICATE 143 -#define WLC_GET_SHORTSLOT 144 -#define WLC_GET_SHORTSLOT_OVERRIDE 145 -#define WLC_SET_SHORTSLOT_OVERRIDE 146 -#define WLC_GET_SHORTSLOT_RESTRICT 147 -#define WLC_SET_SHORTSLOT_RESTRICT 148 -#define WLC_GET_GMODE_PROTECTION 149 -#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 -#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 -#define WLC_UPGRADE 152 - /* #define WLC_GET_MRATE 153 *//* no longer supported */ - /* #define WLC_SET_MRATE 154 *//* no longer supported */ -#define WLC_GET_IGNORE_BCNS 155 -#define WLC_SET_IGNORE_BCNS 156 -#define WLC_GET_SCB_TIMEOUT 157 -#define WLC_SET_SCB_TIMEOUT 158 -#define WLC_GET_ASSOCLIST 159 -#define WLC_GET_CLK 160 -#define WLC_SET_CLK 161 -#define WLC_GET_UP 162 -#define WLC_OUT 163 -#define WLC_GET_WPA_AUTH 164 -#define WLC_SET_WPA_AUTH 165 -#define WLC_GET_UCFLAGS 166 -#define WLC_SET_UCFLAGS 167 -#define WLC_GET_PWRIDX 168 -#define WLC_SET_PWRIDX 169 -#define WLC_GET_TSSI 170 -#define WLC_GET_SUP_RATESET_OVERRIDE 171 -#define WLC_SET_SUP_RATESET_OVERRIDE 172 - /* #define WLC_SET_FAST_TIMER 173 *//* no longer supported */ - /* #define WLC_GET_FAST_TIMER 174 *//* no longer supported */ - /* #define WLC_SET_SLOW_TIMER 175 *//* no longer supported */ - /* #define WLC_GET_SLOW_TIMER 176 *//* no longer supported */ - /* #define WLC_DUMP_PHYREGS 177 *//* no longer supported */ -#define WLC_GET_PROTECTION_CONTROL 178 -#define WLC_SET_PROTECTION_CONTROL 179 -#define WLC_GET_PHYLIST 180 -#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */ -#define WLC_DECRYPT_STATUS 182 /* ndis only */ -#define WLC_GET_KEY_SEQ 183 -#define WLC_GET_SCAN_CHANNEL_TIME 184 -#define WLC_SET_SCAN_CHANNEL_TIME 185 -#define WLC_GET_SCAN_UNASSOC_TIME 186 -#define WLC_SET_SCAN_UNASSOC_TIME 187 -#define WLC_GET_SCAN_HOME_TIME 188 -#define WLC_SET_SCAN_HOME_TIME 189 -#define WLC_GET_SCAN_NPROBES 190 -#define WLC_SET_SCAN_NPROBES 191 -#define WLC_GET_PRB_RESP_TIMEOUT 192 -#define WLC_SET_PRB_RESP_TIMEOUT 193 -#define WLC_GET_ATTEN 194 -#define WLC_SET_ATTEN 195 -#define WLC_GET_SHMEM 196 /* diag */ -#define WLC_SET_SHMEM 197 /* diag */ - /* #define WLC_GET_GMODE_PROTECTION_CTS 198 *//* no longer supported */ - /* #define WLC_SET_GMODE_PROTECTION_CTS 199 *//* no longer supported */ -#define WLC_SET_WSEC_TEST 200 -#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201 -#define WLC_TKIP_COUNTERMEASURES 202 -#define WLC_GET_PIOMODE 203 -#define WLC_SET_PIOMODE 204 -#define WLC_SET_ASSOC_PREFER 205 -#define WLC_GET_ASSOC_PREFER 206 -#define WLC_SET_ROAM_PREFER 207 -#define WLC_GET_ROAM_PREFER 208 -#define WLC_SET_LED 209 -#define WLC_GET_LED 210 -#define WLC_RESERVED6 211 -#define WLC_RESERVED7 212 -#define WLC_GET_CHANNEL_QA 213 -#define WLC_START_CHANNEL_QA 214 -#define WLC_GET_CHANNEL_SEL 215 -#define WLC_START_CHANNEL_SEL 216 -#define WLC_GET_VALID_CHANNELS 217 -#define WLC_GET_FAKEFRAG 218 -#define WLC_SET_FAKEFRAG 219 -#define WLC_GET_PWROUT_PERCENTAGE 220 -#define WLC_SET_PWROUT_PERCENTAGE 221 -#define WLC_SET_BAD_FRAME_PREEMPT 222 -#define WLC_GET_BAD_FRAME_PREEMPT 223 -#define WLC_SET_LEAP_LIST 224 -#define WLC_GET_LEAP_LIST 225 -#define WLC_GET_CWMIN 226 -#define WLC_SET_CWMIN 227 -#define WLC_GET_CWMAX 228 -#define WLC_SET_CWMAX 229 -#define WLC_GET_WET 230 -#define WLC_SET_WET 231 -#define WLC_GET_PUB 232 - /* #define WLC_SET_GLACIAL_TIMER 233 *//* no longer supported */ - /* #define WLC_GET_GLACIAL_TIMER 234 *//* no longer supported */ -#define WLC_GET_KEY_PRIMARY 235 -#define WLC_SET_KEY_PRIMARY 236 - /* #define WLC_DUMP_RADIOREGS 237 *//* no longer supported */ -#define WLC_RESERVED4 238 -#define WLC_RESERVED5 239 -#define WLC_UNSET_CALLBACK 240 -#define WLC_SET_CALLBACK 241 -#define WLC_GET_RADAR 242 -#define WLC_SET_RADAR 243 -#define WLC_SET_SPECT_MANAGMENT 244 -#define WLC_GET_SPECT_MANAGMENT 245 -#define WLC_WDS_GET_REMOTE_HWADDR 246 /* handled in wl_linux.c/wl_vx.c */ -#define WLC_WDS_GET_WPA_SUP 247 -#define WLC_SET_CS_SCAN_TIMER 248 -#define WLC_GET_CS_SCAN_TIMER 249 -#define WLC_MEASURE_REQUEST 250 -#define WLC_INIT 251 -#define WLC_SEND_QUIET 252 -#define WLC_KEEPALIVE 253 -#define WLC_SEND_PWR_CONSTRAINT 254 -#define WLC_UPGRADE_STATUS 255 -#define WLC_CURRENT_PWR 256 -#define WLC_GET_SCAN_PASSIVE_TIME 257 -#define WLC_SET_SCAN_PASSIVE_TIME 258 -#define WLC_LEGACY_LINK_BEHAVIOR 259 -#define WLC_GET_CHANNELS_IN_COUNTRY 260 -#define WLC_GET_COUNTRY_LIST 261 -#define WLC_GET_VAR 262 /* get value of named variable */ -#define WLC_SET_VAR 263 /* set named variable to value */ -#define WLC_NVRAM_GET 264 /* deprecated */ -#define WLC_NVRAM_SET 265 -#define WLC_NVRAM_DUMP 266 -#define WLC_REBOOT 267 -#define WLC_SET_WSEC_PMK 268 -#define WLC_GET_AUTH_MODE 269 -#define WLC_SET_AUTH_MODE 270 -#define WLC_GET_WAKEENTRY 271 -#define WLC_SET_WAKEENTRY 272 -#define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */ -#define WLC_NVOTPW 274 -#define WLC_OTPW 275 -#define WLC_IOV_BLOCK_GET 276 -#define WLC_IOV_MODULES_GET 277 -#define WLC_SOFT_RESET 278 -#define WLC_GET_ALLOW_MODE 279 -#define WLC_SET_ALLOW_MODE 280 -#define WLC_GET_DESIRED_BSSID 281 -#define WLC_SET_DESIRED_BSSID 282 -#define WLC_DISASSOC_MYAP 283 -#define WLC_GET_RESERVED10 284 -#define WLC_GET_RESERVED11 285 -#define WLC_GET_RESERVED12 286 -#define WLC_GET_RESERVED13 287 -#define WLC_GET_RESERVED14 288 -#define WLC_SET_RESERVED15 289 -#define WLC_SET_RESERVED16 290 -#define WLC_GET_RESERVED17 291 -#define WLC_GET_RESERVED18 292 -#define WLC_GET_RESERVED19 293 -#define WLC_SET_RESERVED1A 294 -#define WLC_GET_RESERVED1B 295 -#define WLC_GET_RESERVED1C 296 -#define WLC_GET_RESERVED1D 297 -#define WLC_SET_RESERVED1E 298 -#define WLC_GET_RESERVED1F 299 -#define WLC_GET_RESERVED20 300 -#define WLC_GET_RESERVED21 301 -#define WLC_GET_RESERVED22 302 -#define WLC_GET_RESERVED23 303 -#define WLC_GET_RESERVED24 304 -#define WLC_SET_RESERVED25 305 -#define WLC_GET_RESERVED26 306 -#define WLC_NPHY_SAMPLE_COLLECT 307 /* Nphy sample collect mode */ -#define WLC_UM_PRIV 308 /* for usermode driver private ioctl */ -#define WLC_GET_CMD 309 - /* #define WLC_LAST 310 *//* Never used - can be reused */ -#define WLC_RESERVED8 311 -#define WLC_RESERVED9 312 -#define WLC_RESERVED1 313 -#define WLC_RESERVED2 314 -#define WLC_RESERVED3 315 -#define WLC_LAST 316 - -#ifndef EPICTRL_COOKIE -#define EPICTRL_COOKIE 0xABADCEDE -#endif - -#define WL_DECRYPT_STATUS_SUCCESS 1 -#define WL_DECRYPT_STATUS_FAILURE 2 -#define WL_DECRYPT_STATUS_UNKNOWN 3 - -/* allows user-mode app to poll the status of USB image upgrade */ -#define WLC_UPGRADE_SUCCESS 0 -#define WLC_UPGRADE_PENDING 1 - -/* WLC_GET_AUTH, WLC_SET_AUTH values */ -#define WL_AUTH_OPEN_SYSTEM 0 /* d11 open authentication */ -#define WL_AUTH_SHARED_KEY 1 /* d11 shared authentication */ -#define WL_AUTH_OPEN_SHARED 2 /* try open, then shared if open failed w/rc 13 */ - -/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ -#define WL_RADIO_SW_DISABLE (1<<0) -#define WL_RADIO_HW_DISABLE (1<<1) -#define WL_RADIO_MPC_DISABLE (1<<2) -#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any channel */ - -#define WL_SPURAVOID_OFF 0 -#define WL_SPURAVOID_ON1 1 -#define WL_SPURAVOID_ON2 2 - -/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ -#define WL_TXPWR_OVERRIDE (1U<<31) - -#define WL_PHY_PAVARS_LEN 6 /* Phy type, Band range, chain, a1, b0, b1 */ - -typedef struct wl_po { - u16 phy_type; /* Phy type */ - u16 band; - u16 cckpo; - u32 ofdmpo; - u16 mcspo[8]; -} wl_po_t; - -/* a large TX Power as an init value to factor out of min() calculations, - * keep low enough to fit in an s8, units are .25 dBm - */ -#define WLC_TXPWR_MAX (127) /* ~32 dBm = 1,500 mW */ - -/* "diag" iovar argument and error code */ -#define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */ -#define WL_DIAG_LOOPBACK 2 /* d11 loopback data test */ -#define WL_DIAG_MEMORY 3 /* d11 memory test */ -#define WL_DIAG_LED 4 /* LED test */ -#define WL_DIAG_REG 5 /* d11/phy register test */ -#define WL_DIAG_SROM 6 /* srom read/crc test */ -#define WL_DIAG_DMA 7 /* DMA test */ - -#define WL_DIAGERR_SUCCESS 0 -#define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */ -#define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */ -#define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */ -#define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */ -#define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */ -#define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */ -#define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */ -#define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */ -#define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */ -#define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */ - -#define WL_DIAGERR_MEMORY_TIMEOUT 11 /* d11 memory test didn't finish in time */ -#define WL_DIAGERR_MEMORY_BADPATTERN 12 /* d11 memory test result in bad pattern */ - -/* band types */ -#define WLC_BAND_AUTO 0 /* auto-select */ -#define WLC_BAND_5G 1 /* 5 Ghz */ -#define WLC_BAND_2G 2 /* 2.4 Ghz */ -#define WLC_BAND_ALL 3 /* all bands */ - -/* band range returned by band_range iovar */ -#define WL_CHAN_FREQ_RANGE_2G 0 -#define WL_CHAN_FREQ_RANGE_5GL 1 -#define WL_CHAN_FREQ_RANGE_5GM 2 -#define WL_CHAN_FREQ_RANGE_5GH 3 - -/* phy types (returned by WLC_GET_PHYTPE) */ -#define WLC_PHY_TYPE_A 0 -#define WLC_PHY_TYPE_B 1 -#define WLC_PHY_TYPE_G 2 -#define WLC_PHY_TYPE_N 4 -#define WLC_PHY_TYPE_LP 5 -#define WLC_PHY_TYPE_SSN 6 -#define WLC_PHY_TYPE_HT 7 -#define WLC_PHY_TYPE_LCN 8 -#define WLC_PHY_TYPE_NULL 0xf - -/* MAC list modes */ -#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ -#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ -#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ - -/* - * 54g modes (basic bits may still be overridden) - * - * GMODE_LEGACY_B Rateset: 1b, 2b, 5.5, 11 - * Preamble: Long - * Shortslot: Off - * GMODE_AUTO Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 - * Extended Rateset: 6, 9, 12, 48 - * Preamble: Long - * Shortslot: Auto - * GMODE_ONLY Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 - * Extended Rateset: 6b, 9, 12b, 48 - * Preamble: Short required - * Shortslot: Auto - * GMODE_B_DEFERRED Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 - * Extended Rateset: 6, 9, 12, 48 - * Preamble: Long - * Shortslot: On - * GMODE_PERFORMANCE Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 - * Preamble: Short required - * Shortslot: On and required - * GMODE_LRS Rateset: 1b, 2b, 5.5b, 11b - * Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 - * Preamble: Long - * Shortslot: Auto - */ -#define GMODE_LEGACY_B 0 -#define GMODE_AUTO 1 -#define GMODE_ONLY 2 -#define GMODE_B_DEFERRED 3 -#define GMODE_PERFORMANCE 4 -#define GMODE_LRS 5 -#define GMODE_MAX 6 - -/* values for PLCPHdr_override */ -#define WLC_PLCP_AUTO -1 -#define WLC_PLCP_SHORT 0 -#define WLC_PLCP_LONG 1 - -/* values for g_protection_override and n_protection_override */ -#define WLC_PROTECTION_AUTO -1 -#define WLC_PROTECTION_OFF 0 -#define WLC_PROTECTION_ON 1 -#define WLC_PROTECTION_MMHDR_ONLY 2 -#define WLC_PROTECTION_CTS_ONLY 3 - -/* values for g_protection_control and n_protection_control */ -#define WLC_PROTECTION_CTL_OFF 0 -#define WLC_PROTECTION_CTL_LOCAL 1 -#define WLC_PROTECTION_CTL_OVERLAP 2 - -/* values for n_protection */ -#define WLC_N_PROTECTION_OFF 0 -#define WLC_N_PROTECTION_OPTIONAL 1 -#define WLC_N_PROTECTION_20IN40 2 -#define WLC_N_PROTECTION_MIXEDMODE 3 - -/* values for n_preamble_type */ -#define WLC_N_PREAMBLE_MIXEDMODE 0 -#define WLC_N_PREAMBLE_GF 1 -#define WLC_N_PREAMBLE_GF_BRCM 2 - -/* values for band specific 40MHz capabilities */ -#define WLC_N_BW_20ALL 0 -#define WLC_N_BW_40ALL 1 -#define WLC_N_BW_20IN2G_40IN5G 2 - -/* values to force tx/rx chain */ -#define WLC_N_TXRX_CHAIN0 0 -#define WLC_N_TXRX_CHAIN1 1 - -/* bitflags for SGI support (sgi_rx iovar) */ -#define WLC_N_SGI_20 0x01 -#define WLC_N_SGI_40 0x02 - -/* Values for PM */ -#define PM_OFF 0 -#define PM_MAX 1 - -/* interference mitigation options */ -#define INTERFERE_OVRRIDE_OFF -1 /* interference override off */ -#define INTERFERE_NONE 0 /* off */ -#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */ -#define WLAN_MANUAL 2 /* ACI: no auto detection */ -#define WLAN_AUTO 3 /* ACI: auto detect */ -#define WLAN_AUTO_W_NOISE 4 /* ACI: auto - detect and non 802.11 interference */ -#define AUTO_ACTIVE (1 << 7) /* Auto is currently active */ - -#define WL_RSSI_ANT_VERSION 1 /* current version of wl_rssi_ant_t */ -#define WL_ANT_RX_MAX 2 /* max 2 receive antennas */ -#define WL_ANT_HT_RX_MAX 3 /* max 3 receive antennas/cores */ -#define WL_ANT_IDX_1 0 /* antenna index 1 */ -#define WL_ANT_IDX_2 1 /* antenna index 2 */ - -#ifndef WL_RSSI_ANT_MAX -#define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */ -#elif WL_RSSI_ANT_MAX != 4 -#error "WL_RSSI_ANT_MAX does not match" -#endif - -/* RSSI per antenna */ -typedef struct { - u32 version; /* version field */ - u32 count; /* number of valid antenna rssi */ - s8 rssi_ant[WL_RSSI_ANT_MAX]; /* rssi per antenna */ -} wl_rssi_ant_t; - -#define NUM_PWRCTRL_RATES 12 - -typedef struct { - u8 txpwr_band_max[NUM_PWRCTRL_RATES]; /* User set target */ - u8 txpwr_limit[NUM_PWRCTRL_RATES]; /* reg and local power limit */ - u8 txpwr_local_max; /* local max according to the AP */ - u8 txpwr_local_constraint; /* local constraint according to the AP */ - u8 txpwr_chan_reg_max; /* Regulatory max for this channel */ - u8 txpwr_target[2][NUM_PWRCTRL_RATES]; /* Latest target for 2.4 and 5 Ghz */ - u8 txpwr_est_Pout[2]; /* Latest estimate for 2.4 and 5 Ghz */ - u8 txpwr_opo[NUM_PWRCTRL_RATES]; /* On G phy, OFDM power offset */ - u8 txpwr_bphy_cck_max[NUM_PWRCTRL_RATES]; /* Max CCK power for this band (SROM) */ - u8 txpwr_bphy_ofdm_max; /* Max OFDM power for this band (SROM) */ - u8 txpwr_aphy_max[NUM_PWRCTRL_RATES]; /* Max power for A band (SROM) */ - s8 txpwr_antgain[2]; /* Ant gain for each band - from SROM */ - u8 txpwr_est_Pout_gofdm; /* Pwr estimate for 2.4 OFDM */ -} tx_power_legacy_t; - -#define WL_TX_POWER_RATES_LEGACY 45 -#define WL_TX_POWER_MCS20_FIRST 12 -#define WL_TX_POWER_MCS20_NUM 16 -#define WL_TX_POWER_MCS40_FIRST 28 -#define WL_TX_POWER_MCS40_NUM 17 - - -#define WL_TX_POWER_RATES 101 -#define WL_TX_POWER_CCK_FIRST 0 -#define WL_TX_POWER_CCK_NUM 4 -#define WL_TX_POWER_OFDM_FIRST 4 /* Index for first 20MHz OFDM SISO rate */ -#define WL_TX_POWER_OFDM20_CDD_FIRST 12 /* Index for first 20MHz OFDM CDD rate */ -#define WL_TX_POWER_OFDM40_SISO_FIRST 52 /* Index for first 40MHz OFDM SISO rate */ -#define WL_TX_POWER_OFDM40_CDD_FIRST 60 /* Index for first 40MHz OFDM CDD rate */ -#define WL_TX_POWER_OFDM_NUM 8 -#define WL_TX_POWER_MCS20_SISO_FIRST 20 /* Index for first 20MHz MCS SISO rate */ -#define WL_TX_POWER_MCS20_CDD_FIRST 28 /* Index for first 20MHz MCS CDD rate */ -#define WL_TX_POWER_MCS20_STBC_FIRST 36 /* Index for first 20MHz MCS STBC rate */ -#define WL_TX_POWER_MCS20_SDM_FIRST 44 /* Index for first 20MHz MCS SDM rate */ -#define WL_TX_POWER_MCS40_SISO_FIRST 68 /* Index for first 40MHz MCS SISO rate */ -#define WL_TX_POWER_MCS40_CDD_FIRST 76 /* Index for first 40MHz MCS CDD rate */ -#define WL_TX_POWER_MCS40_STBC_FIRST 84 /* Index for first 40MHz MCS STBC rate */ -#define WL_TX_POWER_MCS40_SDM_FIRST 92 /* Index for first 40MHz MCS SDM rate */ -#define WL_TX_POWER_MCS_1_STREAM_NUM 8 -#define WL_TX_POWER_MCS_2_STREAM_NUM 8 -#define WL_TX_POWER_MCS_32 100 /* Index for 40MHz rate MCS 32 */ -#define WL_TX_POWER_MCS_32_NUM 1 - -/* sslpnphy specifics */ -#define WL_TX_POWER_MCS20_SISO_FIRST_SSN 12 /* Index for first 20MHz MCS SISO rate */ - -/* tx_power_t.flags bits */ -#define WL_TX_POWER_F_ENABLED 1 -#define WL_TX_POWER_F_HW 2 -#define WL_TX_POWER_F_MIMO 4 -#define WL_TX_POWER_F_SISO 8 - -typedef struct { - u32 flags; - chanspec_t chanspec; /* txpwr report for this channel */ - chanspec_t local_chanspec; /* channel on which we are associated */ - u8 local_max; /* local max according to the AP */ - u8 local_constraint; /* local constraint according to the AP */ - s8 antgain[2]; /* Ant gain for each band - from SROM */ - u8 rf_cores; /* count of RF Cores being reported */ - u8 est_Pout[4]; /* Latest tx power out estimate per RF chain */ - u8 est_Pout_act[4]; /* Latest tx power out estimate per RF chain - * without adjustment - */ - u8 est_Pout_cck; /* Latest CCK tx power out estimate */ - u8 tx_power_max[4]; /* Maximum target power among all rates */ - u8 tx_power_max_rate_ind[4]; /* Index of the rate with the max target power */ - u8 user_limit[WL_TX_POWER_RATES]; /* User limit */ - u8 reg_limit[WL_TX_POWER_RATES]; /* Regulatory power limit */ - u8 board_limit[WL_TX_POWER_RATES]; /* Max power board can support (SROM) */ - u8 target[WL_TX_POWER_RATES]; /* Latest target power */ -} tx_power_t; - -typedef struct tx_inst_power { - u8 txpwr_est_Pout[2]; /* Latest estimate for 2.4 and 5 Ghz */ - u8 txpwr_est_Pout_gofdm; /* Pwr estimate for 2.4 OFDM */ -} tx_inst_power_t; - -/* Message levels */ -#define WL_ERROR_VAL 0x00000001 -#define WL_TRACE_VAL 0x00000002 - -/* maximum channels returned by the get valid channels iovar */ -#define WL_NUMCHANNELS 64 -#define WL_NUMCHANSPECS 100 - -struct tsinfo_arg { - u8 octets[3]; -}; - -#define NFIFO 6 /* # tx/rx fifopairs */ - -struct wl_msglevel2 { - u32 low; - u32 high; -}; - -/* structure for per-tid ampdu control */ -struct ampdu_tid_control { - u8 tid; /* tid */ - u8 enable; /* enable/disable */ -}; - -/* structure for identifying ea/tid for sending addba/delba */ -struct ampdu_ea_tid { - u8 ea[ETH_ALEN]; /* Station address */ - u8 tid; /* tid */ -}; -/* structure for identifying retry/tid for retry_limit_tid/rr_retry_limit_tid */ -struct ampdu_retry_tid { - u8 tid; /* tid */ - u8 retry; /* retry value */ -}; - - -/* Software feature flag defines used by wlfeatureflag */ -#define WL_SWFL_NOHWRADIO 0x0004 -#define WL_SWFL_FLOWCONTROL 0x0008 /* Enable backpressure to OS stack */ -#define WL_SWFL_WLBSSSORT 0x0010 /* Per-port supports sorting of BSS */ - -#define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */ - - -/* Pattern matching filter. Specifies an offset within received packets to - * start matching, the pattern to match, the size of the pattern, and a bitmask - * that indicates which bits within the pattern should be matched. - */ -typedef struct wl_pkt_filter_pattern { - u32 offset; /* Offset within received packet to start pattern matching. - * Offset '0' is the first byte of the ethernet header. - */ - u32 size_bytes; /* Size of the pattern. Bitmask must be the same size. */ - u8 mask_and_pattern[1]; /* Variable length mask and pattern data. mask starts - * at offset 0. Pattern immediately follows mask. - */ -} wl_pkt_filter_pattern_t; - -/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */ -typedef struct wl_pkt_filter { - u32 id; /* Unique filter id, specified by app. */ - u32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */ - u32 negate_match; /* Negate the result of filter matches */ - union { /* Filter definitions */ - wl_pkt_filter_pattern_t pattern; /* Pattern matching filter */ - } u; -} wl_pkt_filter_t; - -#define WL_PKT_FILTER_FIXED_LEN offsetof(wl_pkt_filter_t, u) -#define WL_PKT_FILTER_PATTERN_FIXED_LEN offsetof(wl_pkt_filter_pattern_t, mask_and_pattern) - -/* IOVAR "pkt_filter_enable" parameter. */ -typedef struct wl_pkt_filter_enable { - u32 id; /* Unique filter id */ - u32 enable; /* Enable/disable bool */ -} wl_pkt_filter_enable_t; - - -#define WLC_RSSI_INVALID 0 /* invalid RSSI value */ - -/* n-mode support capability */ -/* 2x2 includes both 1x1 & 2x2 devices - * reserved #define 2 for future when we want to separate 1x1 & 2x2 and - * control it independently - */ -#define WL_11N_2x2 1 -#define WL_11N_3x3 3 -#define WL_11N_4x4 4 - -/* define 11n feature disable flags */ -#define WLFEATURE_DISABLE_11N 0x00000001 -#define WLFEATURE_DISABLE_11N_STBC_TX 0x00000002 -#define WLFEATURE_DISABLE_11N_STBC_RX 0x00000004 -#define WLFEATURE_DISABLE_11N_SGI_TX 0x00000008 -#define WLFEATURE_DISABLE_11N_SGI_RX 0x00000010 -#define WLFEATURE_DISABLE_11N_AMPDU_TX 0x00000020 -#define WLFEATURE_DISABLE_11N_AMPDU_RX 0x00000040 -#define WLFEATURE_DISABLE_11N_GF 0x00000080 - -#define WL_EVENTING_MASK_LEN 16 - -#define TOE_TX_CSUM_OL 0x00000001 -#define TOE_RX_CSUM_OL 0x00000002 - -#define PM_OFF 0 -#define PM_MAX 1 -#define PM_FAST 2 - -typedef enum sup_auth_status { - WLC_SUP_DISCONNECTED = 0, - WLC_SUP_CONNECTING, - WLC_SUP_IDREQUIRED, - WLC_SUP_AUTHENTICATING, - WLC_SUP_AUTHENTICATED, - WLC_SUP_KEYXCHANGE, - WLC_SUP_KEYED, - WLC_SUP_TIMEOUT, - WLC_SUP_LAST_BASIC_STATE, - WLC_SUP_KEYXCHANGE_WAIT_M1 = WLC_SUP_AUTHENTICATED, - WLC_SUP_KEYXCHANGE_PREP_M2 = WLC_SUP_KEYXCHANGE, - WLC_SUP_KEYXCHANGE_WAIT_M3 = WLC_SUP_LAST_BASIC_STATE, - WLC_SUP_KEYXCHANGE_PREP_M4, - WLC_SUP_KEYXCHANGE_WAIT_G1, - WLC_SUP_KEYXCHANGE_PREP_G2 -} sup_auth_status_t; -#endif /* _wlioctl_h_ */ |