diff options
Diffstat (limited to 'drivers/scsi/bnx2i')
| -rw-r--r-- | drivers/scsi/bnx2i/57xx_iscsi_hsi.h | 12 | ||||
| -rw-r--r-- | drivers/scsi/bnx2i/bnx2i_init.c | 12 |
2 files changed, 13 insertions, 11 deletions
diff --git a/drivers/scsi/bnx2i/57xx_iscsi_hsi.h b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h index 37049e433c9e..7052a839b0ea 100644 --- a/drivers/scsi/bnx2i/57xx_iscsi_hsi.h +++ b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h @@ -581,8 +581,10 @@ struct iscsi_kwqe_init1 { #define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE_SHIFT 4 #define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE (0x1<<5) #define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE_SHIFT 5 -#define ISCSI_KWQE_INIT1_RESERVED1 (0x3<<6) -#define ISCSI_KWQE_INIT1_RESERVED1_SHIFT 6 +#define ISCSI_KWQE_INIT1_TIME_STAMPS_ENABLE (0x1<<6) +#define ISCSI_KWQE_INIT1_TIME_STAMPS_ENABLE_SHIFT 6 +#define ISCSI_KWQE_INIT1_RESERVED1 (0x1<<7) +#define ISCSI_KWQE_INIT1_RESERVED1_SHIFT 7 u16 cq_num_wqes; #elif defined(__LITTLE_ENDIAN) u16 cq_num_wqes; @@ -593,8 +595,10 @@ struct iscsi_kwqe_init1 { #define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE_SHIFT 4 #define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE (0x1<<5) #define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE_SHIFT 5 -#define ISCSI_KWQE_INIT1_RESERVED1 (0x3<<6) -#define ISCSI_KWQE_INIT1_RESERVED1_SHIFT 6 +#define ISCSI_KWQE_INIT1_TIME_STAMPS_ENABLE (0x1<<6) +#define ISCSI_KWQE_INIT1_TIME_STAMPS_ENABLE_SHIFT 6 +#define ISCSI_KWQE_INIT1_RESERVED1 (0x1<<7) +#define ISCSI_KWQE_INIT1_RESERVED1_SHIFT 7 u8 cq_log_wqes_per_page; #endif #if defined(__BIG_ENDIAN) diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index b6f6f436777b..34c294b42c84 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -172,16 +172,14 @@ void bnx2i_start(void *handle) struct bnx2i_hba *hba = handle; int i = HZ; - /* - * We should never register devices that don't support iSCSI - * (see bnx2i_init_one), so something is wrong if we try to - * start a iSCSI adapter on hardware with 0 supported iSCSI - * connections + /* On some bnx2x devices, it is possible that iSCSI is no + * longer supported after firmware is downloaded. In that + * case, the iscsi_init_msg will return failure. */ - BUG_ON(!hba->cnic->max_iscsi_conn); bnx2i_send_fw_iscsi_init_msg(hba); - while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) && i--) + while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) && + !test_bit(ADAPTER_STATE_INIT_FAILED, &hba->adapter_state) && i--) msleep(BNX2I_INIT_POLL_TIME); } |