diff options
Diffstat (limited to 'drivers/acpi/acpica')
| -rw-r--r-- | drivers/acpi/acpica/dbcmds.c | 1187 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dbconvert.c | 484 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dbdisply.c | 1108 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dbexec.c | 753 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dbfileio.c | 256 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dbhistry.c | 239 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dbinput.c | 1274 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dbmethod.c | 369 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dbnames.c | 947 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dbobject.c | 533 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dbstats.c | 546 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dbtest.c | 1057 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dbutils.c | 457 | ||||
| -rw-r--r-- | drivers/acpi/acpica/dbxface.c | 467 |
14 files changed, 9677 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/dbcmds.c b/drivers/acpi/acpica/dbcmds.c new file mode 100644 index 000000000000..30414b3d7fdd --- /dev/null +++ b/drivers/acpi/acpica/dbcmds.c @@ -0,0 +1,1187 @@ +/******************************************************************************* + * + * Module Name: dbcmds - Miscellaneous debug commands and output routines + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acevents.h" +#include "acdebug.h" +#include "acnamesp.h" +#include "acresrc.h" +#include "actables.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbcmds") + +/* Local prototypes */ +static void +acpi_dm_compare_aml_resources(u8 *aml1_buffer, + acpi_rsdesc_size aml1_buffer_length, + u8 *aml2_buffer, + acpi_rsdesc_size aml2_buffer_length); + +static acpi_status +acpi_dm_test_resource_conversion(struct acpi_namespace_node *node, char *name); + +static acpi_status +acpi_db_resource_callback(struct acpi_resource *resource, void *context); + +static acpi_status +acpi_db_device_resources(acpi_handle obj_handle, + u32 nesting_level, void *context, void **return_value); + +static void acpi_db_do_one_sleep_state(u8 sleep_state); + +static char *acpi_db_trace_method_name = NULL; + +/******************************************************************************* + * + * FUNCTION: acpi_db_convert_to_node + * + * PARAMETERS: in_string - String to convert + * + * RETURN: Pointer to a NS node + * + * DESCRIPTION: Convert a string to a valid NS pointer. Handles numeric or + * alphanumeric strings. + * + ******************************************************************************/ + +struct acpi_namespace_node *acpi_db_convert_to_node(char *in_string) +{ + struct acpi_namespace_node *node; + acpi_size address; + + if ((*in_string >= 0x30) && (*in_string <= 0x39)) { + + /* Numeric argument, convert */ + + address = strtoul(in_string, NULL, 16); + node = ACPI_TO_POINTER(address); + if (!acpi_os_readable(node, sizeof(struct acpi_namespace_node))) { + acpi_os_printf("Address %p is invalid", node); + return (NULL); + } + + /* Make sure pointer is valid NS node */ + + if (ACPI_GET_DESCRIPTOR_TYPE(node) != ACPI_DESC_TYPE_NAMED) { + acpi_os_printf + ("Address %p is not a valid namespace node [%s]\n", + node, acpi_ut_get_descriptor_name(node)); + return (NULL); + } + } else { + /* + * Alpha argument: The parameter is a name string that must be + * resolved to a Namespace object. + */ + node = acpi_db_local_ns_lookup(in_string); + if (!node) { + acpi_os_printf + ("Could not find [%s] in namespace, defaulting to root node\n", + in_string); + node = acpi_gbl_root_node; + } + } + + return (node); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_sleep + * + * PARAMETERS: object_arg - Desired sleep state (0-5). NULL means + * invoke all possible sleep states. + * + * RETURN: Status + * + * DESCRIPTION: Simulate sleep/wake sequences + * + ******************************************************************************/ + +acpi_status acpi_db_sleep(char *object_arg) +{ + u8 sleep_state; + u32 i; + + ACPI_FUNCTION_TRACE(acpi_db_sleep); + + /* Null input (no arguments) means to invoke all sleep states */ + + if (!object_arg) { + acpi_os_printf("Invoking all possible sleep states, 0-%d\n", + ACPI_S_STATES_MAX); + + for (i = 0; i <= ACPI_S_STATES_MAX; i++) { + acpi_db_do_one_sleep_state((u8)i); + } + + return_ACPI_STATUS(AE_OK); + } + + /* Convert argument to binary and invoke the sleep state */ + + sleep_state = (u8)strtoul(object_arg, NULL, 0); + acpi_db_do_one_sleep_state(sleep_state); + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_do_one_sleep_state + * + * PARAMETERS: sleep_state - Desired sleep state (0-5) + * + * RETURN: None + * + * DESCRIPTION: Simulate a sleep/wake sequence + * + ******************************************************************************/ + +static void acpi_db_do_one_sleep_state(u8 sleep_state) +{ + acpi_status status; + u8 sleep_type_a; + u8 sleep_type_b; + + /* Validate parameter */ + + if (sleep_state > ACPI_S_STATES_MAX) { + acpi_os_printf("Sleep state %d out of range (%d max)\n", + sleep_state, ACPI_S_STATES_MAX); + return; + } + + acpi_os_printf("\n---- Invoking sleep state S%d (%s):\n", + sleep_state, acpi_gbl_sleep_state_names[sleep_state]); + + /* Get the values for the sleep type registers (for display only) */ + + status = + acpi_get_sleep_type_data(sleep_state, &sleep_type_a, &sleep_type_b); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not evaluate [%s] method, %s\n", + acpi_gbl_sleep_state_names[sleep_state], + acpi_format_exception(status)); + return; + } + + acpi_os_printf + ("Register values for sleep state S%d: Sleep-A: %.2X, Sleep-B: %.2X\n", + sleep_state, sleep_type_a, sleep_type_b); + + /* Invoke the various sleep/wake interfaces */ + + acpi_os_printf("**** Sleep: Prepare to sleep (S%d) ****\n", + sleep_state); + status = acpi_enter_sleep_state_prep(sleep_state); + if (ACPI_FAILURE(status)) { + goto error_exit; + } + + acpi_os_printf("**** Sleep: Going to sleep (S%d) ****\n", sleep_state); + status = acpi_enter_sleep_state(sleep_state); + if (ACPI_FAILURE(status)) { + goto error_exit; + } + + acpi_os_printf("**** Wake: Prepare to return from sleep (S%d) ****\n", + sleep_state); + status = acpi_leave_sleep_state_prep(sleep_state); + if (ACPI_FAILURE(status)) { + goto error_exit; + } + + acpi_os_printf("**** Wake: Return from sleep (S%d) ****\n", + sleep_state); + status = acpi_leave_sleep_state(sleep_state); + if (ACPI_FAILURE(status)) { + goto error_exit; + } + + return; + +error_exit: + ACPI_EXCEPTION((AE_INFO, status, "During invocation of sleep state S%d", + sleep_state)); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_locks + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Display information about internal mutexes. + * + ******************************************************************************/ + +void acpi_db_display_locks(void) +{ + u32 i; + + for (i = 0; i < ACPI_MAX_MUTEX; i++) { + acpi_os_printf("%26s : %s\n", acpi_ut_get_mutex_name(i), + acpi_gbl_mutex_info[i].thread_id == + ACPI_MUTEX_NOT_ACQUIRED ? "Locked" : "Unlocked"); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_table_info + * + * PARAMETERS: table_arg - Name of table to be displayed + * + * RETURN: None + * + * DESCRIPTION: Display information about loaded tables. Current + * implementation displays all loaded tables. + * + ******************************************************************************/ + +void acpi_db_display_table_info(char *table_arg) +{ + u32 i; + struct acpi_table_desc *table_desc; + acpi_status status; + + /* Header */ + + acpi_os_printf("Idx ID Status Type " + "TableHeader (Sig, Address, Length, Misc)\n"); + + /* Walk the entire root table list */ + + for (i = 0; i < acpi_gbl_root_table_list.current_table_count; i++) { + table_desc = &acpi_gbl_root_table_list.tables[i]; + + /* Index and Table ID */ + + acpi_os_printf("%3u %.2u ", i, table_desc->owner_id); + + /* Decode the table flags */ + + if (!(table_desc->flags & ACPI_TABLE_IS_LOADED)) { + acpi_os_printf("NotLoaded "); + } else { + acpi_os_printf(" Loaded "); + } + + switch (table_desc->flags & ACPI_TABLE_ORIGIN_MASK) { + case ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL: + + acpi_os_printf("External/virtual "); + break; + + case ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL: + + acpi_os_printf("Internal/physical "); + break; + + case ACPI_TABLE_ORIGIN_INTERNAL_VIRTUAL: + + acpi_os_printf("Internal/virtual "); + break; + + default: + + acpi_os_printf("INVALID TYPE "); + break; + } + + /* Make sure that the table is mapped */ + + status = acpi_tb_validate_table(table_desc); + if (ACPI_FAILURE(status)) { + return; + } + + /* Dump the table header */ + + if (table_desc->pointer) { + acpi_tb_print_table_header(table_desc->address, + table_desc->pointer); + } else { + /* If the pointer is null, the table has been unloaded */ + + ACPI_INFO((AE_INFO, "%4.4s - Table has been unloaded", + table_desc->signature.ascii)); + } + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_unload_acpi_table + * + * PARAMETERS: object_name - Namespace pathname for an object that + * is owned by the table to be unloaded + * + * RETURN: None + * + * DESCRIPTION: Unload an ACPI table, via any namespace node that is owned + * by the table. + * + ******************************************************************************/ + +void acpi_db_unload_acpi_table(char *object_name) +{ + struct acpi_namespace_node *node; + acpi_status status; + + /* Translate name to an Named object */ + + node = acpi_db_convert_to_node(object_name); + if (!node) { + return; + } + + status = acpi_unload_parent_table(ACPI_CAST_PTR(acpi_handle, node)); + if (ACPI_SUCCESS(status)) { + acpi_os_printf("Parent of [%s] (%p) unloaded and uninstalled\n", + object_name, node); + } else { + acpi_os_printf("%s, while unloading parent table of [%s]\n", + acpi_format_exception(status), object_name); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_send_notify + * + * PARAMETERS: name - Name of ACPI object where to send notify + * value - Value of the notify to send. + * + * RETURN: None + * + * DESCRIPTION: Send an ACPI notification. The value specified is sent to the + * named object as an ACPI notify. + * + ******************************************************************************/ + +void acpi_db_send_notify(char *name, u32 value) +{ + struct acpi_namespace_node *node; + acpi_status status; + + /* Translate name to an Named object */ + + node = acpi_db_convert_to_node(name); + if (!node) { + return; + } + + /* Dispatch the notify if legal */ + + if (acpi_ev_is_notify_object(node)) { + status = acpi_ev_queue_notify_request(node, value); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not queue notify\n"); + } + } else { + acpi_os_printf("Named object [%4.4s] Type %s, " + "must be Device/Thermal/Processor type\n", + acpi_ut_get_node_name(node), + acpi_ut_get_type_name(node->type)); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_interfaces + * + * PARAMETERS: action_arg - Null, "install", or "remove" + * interface_name_arg - Name for install/remove options + * + * RETURN: None + * + * DESCRIPTION: Display or modify the global _OSI interface list + * + ******************************************************************************/ + +void acpi_db_display_interfaces(char *action_arg, char *interface_name_arg) +{ + struct acpi_interface_info *next_interface; + char *sub_string; + acpi_status status; + + /* If no arguments, just display current interface list */ + + if (!action_arg) { + (void)acpi_os_acquire_mutex(acpi_gbl_osi_mutex, + ACPI_WAIT_FOREVER); + + next_interface = acpi_gbl_supported_interfaces; + while (next_interface) { + if (!(next_interface->flags & ACPI_OSI_INVALID)) { + acpi_os_printf("%s\n", next_interface->name); + } + + next_interface = next_interface->next; + } + + acpi_os_release_mutex(acpi_gbl_osi_mutex); + return; + } + + /* If action_arg exists, so must interface_name_arg */ + + if (!interface_name_arg) { + acpi_os_printf("Missing Interface Name argument\n"); + return; + } + + /* Uppercase the action for match below */ + + acpi_ut_strupr(action_arg); + + /* install - install an interface */ + + sub_string = strstr("INSTALL", action_arg); + if (sub_string) { + status = acpi_install_interface(interface_name_arg); + if (ACPI_FAILURE(status)) { + acpi_os_printf("%s, while installing \"%s\"\n", + acpi_format_exception(status), + interface_name_arg); + } + return; + } + + /* remove - remove an interface */ + + sub_string = strstr("REMOVE", action_arg); + if (sub_string) { + status = acpi_remove_interface(interface_name_arg); + if (ACPI_FAILURE(status)) { + acpi_os_printf("%s, while removing \"%s\"\n", + acpi_format_exception(status), + interface_name_arg); + } + return; + } + + /* Invalid action_arg */ + + acpi_os_printf("Invalid action argument: %s\n", action_arg); + return; +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_template + * + * PARAMETERS: buffer_arg - Buffer name or address + * + * RETURN: None + * + * DESCRIPTION: Dump a buffer that contains a resource template + * + ******************************************************************************/ + +void acpi_db_display_template(char *buffer_arg) +{ + struct acpi_namespace_node *node; + acpi_status status; + struct acpi_buffer return_buffer; + + /* Translate buffer_arg to an Named object */ + + node = acpi_db_convert_to_node(buffer_arg); + if (!node || (node == acpi_gbl_root_node)) { + acpi_os_printf("Invalid argument: %s\n", buffer_arg); + return; + } + + /* We must have a buffer object */ + + if (node->type != ACPI_TYPE_BUFFER) { + acpi_os_printf + ("Not a Buffer object, cannot be a template: %s\n", + buffer_arg); + return; + } + + return_buffer.length = ACPI_DEBUG_BUFFER_SIZE; + return_buffer.pointer = acpi_gbl_db_buffer; + + /* Attempt to convert the raw buffer to a resource list */ + + status = acpi_rs_create_resource_list(node->object, &return_buffer); + + acpi_db_set_output_destination(ACPI_DB_REDIRECTABLE_OUTPUT); + acpi_dbg_level |= ACPI_LV_RESOURCES; + + if (ACPI_FAILURE(status)) { + acpi_os_printf + ("Could not convert Buffer to a resource list: %s, %s\n", + buffer_arg, acpi_format_exception(status)); + goto dump_buffer; + } + + /* Now we can dump the resource list */ + + acpi_rs_dump_resource_list(ACPI_CAST_PTR(struct acpi_resource, + return_buffer.pointer)); + +dump_buffer: + acpi_os_printf("\nRaw data buffer:\n"); + acpi_ut_debug_dump_buffer((u8 *)node->object->buffer.pointer, + node->object->buffer.length, + DB_BYTE_DISPLAY, ACPI_UINT32_MAX); + + acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT); + return; +} + +/******************************************************************************* + * + * FUNCTION: acpi_dm_compare_aml_resources + * + * PARAMETERS: aml1_buffer - Contains first resource list + * aml1_buffer_length - Length of first resource list + * aml2_buffer - Contains second resource list + * aml2_buffer_length - Length of second resource list + * + * RETURN: None + * + * DESCRIPTION: Compare two AML resource lists, descriptor by descriptor (in + * order to isolate a miscompare to an individual resource) + * + ******************************************************************************/ + +static void +acpi_dm_compare_aml_resources(u8 *aml1_buffer, + acpi_rsdesc_size aml1_buffer_length, + u8 *aml2_buffer, + acpi_rsdesc_size aml2_buffer_length) +{ + u8 *aml1; + u8 *aml2; + u8 *aml1_end; + u8 *aml2_end; + acpi_rsdesc_size aml1_length; + acpi_rsdesc_size aml2_length; + acpi_rsdesc_size offset = 0; + u8 resource_type; + u32 count = 0; + u32 i; + + /* Compare overall buffer sizes (may be different due to size rounding) */ + + if (aml1_buffer_length != aml2_buffer_length) { + acpi_os_printf("**** Buffer length mismatch in converted " + "AML: Original %X, New %X ****\n", + aml1_buffer_length, aml2_buffer_length); + } + + aml1 = aml1_buffer; + aml2 = aml2_buffer; + aml1_end = aml1_buffer + aml1_buffer_length; + aml2_end = aml2_buffer + aml2_buffer_length; + + /* Walk the descriptor lists, comparing each descriptor */ + + while ((aml1 < aml1_end) && (aml2 < aml2_end)) { + + /* Get the lengths of each descriptor */ + + aml1_length = acpi_ut_get_descriptor_length(aml1); + aml2_length = acpi_ut_get_descriptor_length(aml2); + resource_type = acpi_ut_get_resource_type(aml1); + + /* Check for descriptor length match */ + + if (aml1_length != aml2_length) { + acpi_os_printf + ("**** Length mismatch in descriptor [%.2X] type %2.2X, " + "Offset %8.8X Len1 %X, Len2 %X ****\n", count, + resource_type, offset, aml1_length, aml2_length); + } + + /* Check for descriptor byte match */ + + else if (memcmp(aml1, aml2, aml1_length)) { + acpi_os_printf + ("**** Data mismatch in descriptor [%.2X] type %2.2X, " + "Offset %8.8X ****\n", count, resource_type, + offset); + + for (i = 0; i < aml1_length; i++) { + if (aml1[i] != aml2[i]) { + acpi_os_printf + ("Mismatch at byte offset %.2X: is %2.2X, " + "should be %2.2X\n", i, aml2[i], + aml1[i]); + } + } + } + + /* Exit on end_tag descriptor */ + + if (resource_type == ACPI_RESOURCE_NAME_END_TAG) { + return; + } + + /* Point to next descriptor in each buffer */ + + count++; + offset += aml1_length; + aml1 += aml1_length; + aml2 += aml2_length; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_dm_test_resource_conversion + * + * PARAMETERS: node - Parent device node + * name - resource method name (_CRS) + * + * RETURN: Status + * + * DESCRIPTION: Compare the original AML with a conversion of the AML to + * internal resource list, then back to AML. + * + ******************************************************************************/ + +static acpi_status +acpi_dm_test_resource_conversion(struct acpi_namespace_node *node, char *name) +{ + acpi_status status; + struct acpi_buffer return_buffer; + struct acpi_buffer resource_buffer; + struct acpi_buffer new_aml; + union acpi_object *original_aml; + + acpi_os_printf("Resource Conversion Comparison:\n"); + + new_aml.length = ACPI_ALLOCATE_LOCAL_BUFFER; + return_buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER; + resource_buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER; + + /* Get the original _CRS AML resource template */ + + status = acpi_evaluate_object(node, name, NULL, &return_buffer); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not obtain %s: %s\n", + name, acpi_format_exception(status)); + return (status); + } + + /* Get the AML resource template, converted to internal resource structs */ + + status = acpi_get_current_resources(node, &resource_buffer); + if (ACPI_FAILURE(status)) { + acpi_os_printf("AcpiGetCurrentResources failed: %s\n", + acpi_format_exception(status)); + goto exit1; + } + + /* Convert internal resource list to external AML resource template */ + + status = acpi_rs_create_aml_resources(&resource_buffer, &new_aml); + if (ACPI_FAILURE(status)) { + acpi_os_printf("AcpiRsCreateAmlResources failed: %s\n", + acpi_format_exception(status)); + goto exit2; + } + + /* Compare original AML to the newly created AML resource list */ + + original_aml = return_buffer.pointer; + + acpi_dm_compare_aml_resources(original_aml->buffer.pointer, + (acpi_rsdesc_size) original_aml->buffer. + length, new_aml.pointer, + (acpi_rsdesc_size) new_aml.length); + + /* Cleanup and exit */ + + ACPI_FREE(new_aml.pointer); +exit2: + ACPI_FREE(resource_buffer.pointer); +exit1: + ACPI_FREE(return_buffer.pointer); + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_resource_callback + * + * PARAMETERS: acpi_walk_resource_callback + * + * RETURN: Status + * + * DESCRIPTION: Simple callback to exercise acpi_walk_resources and + * acpi_walk_resource_buffer. + * + ******************************************************************************/ + +static acpi_status +acpi_db_resource_callback(struct acpi_resource *resource, void *context) +{ + + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_device_resources + * + * PARAMETERS: acpi_walk_callback + * + * RETURN: Status + * + * DESCRIPTION: Display the _PRT/_CRS/_PRS resources for a device object. + * + ******************************************************************************/ + +static acpi_status +acpi_db_device_resources(acpi_handle obj_handle, + u32 nesting_level, void *context, void **return_value) +{ + struct acpi_namespace_node *node; + struct acpi_namespace_node *prt_node = NULL; + struct acpi_namespace_node *crs_node = NULL; + struct acpi_namespace_node *prs_node = NULL; + struct acpi_namespace_node *aei_node = NULL; + char *parent_path; + struct acpi_buffer return_buffer; + acpi_status status; + + node = ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle); + parent_path = acpi_ns_get_external_pathname(node); + if (!parent_path) { + return (AE_NO_MEMORY); + } + + /* Get handles to the resource methods for this device */ + + (void)acpi_get_handle(node, METHOD_NAME__PRT, + ACPI_CAST_PTR(acpi_handle, &prt_node)); + (void)acpi_get_handle(node, METHOD_NAME__CRS, + ACPI_CAST_PTR(acpi_handle, &crs_node)); + (void)acpi_get_handle(node, METHOD_NAME__PRS, + ACPI_CAST_PTR(acpi_handle, &prs_node)); + (void)acpi_get_handle(node, METHOD_NAME__AEI, + ACPI_CAST_PTR(acpi_handle, &aei_node)); + + if (!prt_node && !crs_node && !prs_node && !aei_node) { + goto cleanup; /* Nothing to do */ + } + + acpi_os_printf("\nDevice: %s\n", parent_path); + + /* Prepare for a return object of arbitrary size */ + + return_buffer.pointer = acpi_gbl_db_buffer; + return_buffer.length = ACPI_DEBUG_BUFFER_SIZE; + + /* _PRT */ + + if (prt_node) { + acpi_os_printf("Evaluating _PRT\n"); + + status = + acpi_evaluate_object(prt_node, NULL, NULL, &return_buffer); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not evaluate _PRT: %s\n", + acpi_format_exception(status)); + goto get_crs; + } + + return_buffer.pointer = acpi_gbl_db_buffer; + return_buffer.length = ACPI_DEBUG_BUFFER_SIZE; + + status = acpi_get_irq_routing_table(node, &return_buffer); + if (ACPI_FAILURE(status)) { + acpi_os_printf("GetIrqRoutingTable failed: %s\n", + acpi_format_exception(status)); + goto get_crs; + } + + acpi_rs_dump_irq_list(ACPI_CAST_PTR(u8, acpi_gbl_db_buffer)); + } + + /* _CRS */ + +get_crs: + if (crs_node) { + acpi_os_printf("Evaluating _CRS\n"); + + return_buffer.pointer = acpi_gbl_db_buffer; + return_buffer.length = ACPI_DEBUG_BUFFER_SIZE; + + status = + acpi_evaluate_object(crs_node, NULL, NULL, &return_buffer); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not evaluate _CRS: %s\n", + acpi_format_exception(status)); + goto get_prs; + } + + /* This code exercises the acpi_walk_resources interface */ + + status = acpi_walk_resources(node, METHOD_NAME__CRS, + acpi_db_resource_callback, NULL); + if (ACPI_FAILURE(status)) { + acpi_os_printf("AcpiWalkResources failed: %s\n", + acpi_format_exception(status)); + goto get_prs; + } + + /* Get the _CRS resource list (test ALLOCATE buffer) */ + + return_buffer.pointer = NULL; + return_buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER; + + status = acpi_get_current_resources(node, &return_buffer); + if (ACPI_FAILURE(status)) { + acpi_os_printf("AcpiGetCurrentResources failed: %s\n", + acpi_format_exception(status)); + goto get_prs; + } + + /* This code exercises the acpi_walk_resource_buffer interface */ + + status = acpi_walk_resource_buffer(&return_buffer, + acpi_db_resource_callback, + NULL); + if (ACPI_FAILURE(status)) { + acpi_os_printf("AcpiWalkResourceBuffer failed: %s\n", + acpi_format_exception(status)); + goto end_crs; + } + + /* Dump the _CRS resource list */ + + acpi_rs_dump_resource_list(ACPI_CAST_PTR(struct acpi_resource, + return_buffer. + pointer)); + + /* + * Perform comparison of original AML to newly created AML. This + * tests both the AML->Resource conversion and the Resource->AML + * conversion. + */ + (void)acpi_dm_test_resource_conversion(node, METHOD_NAME__CRS); + + /* Execute _SRS with the resource list */ + + acpi_os_printf("Evaluating _SRS\n"); + + status = acpi_set_current_resources(node, &return_buffer); + if (ACPI_FAILURE(status)) { + acpi_os_printf("AcpiSetCurrentResources failed: %s\n", + acpi_format_exception(status)); + goto end_crs; + } + +end_crs: + ACPI_FREE(return_buffer.pointer); + } + + /* _PRS */ + +get_prs: + if (prs_node) { + acpi_os_printf("Evaluating _PRS\n"); + + return_buffer.pointer = acpi_gbl_db_buffer; + return_buffer.length = ACPI_DEBUG_BUFFER_SIZE; + + status = + acpi_evaluate_object(prs_node, NULL, NULL, &return_buffer); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not evaluate _PRS: %s\n", + acpi_format_exception(status)); + goto get_aei; + } + + return_buffer.pointer = acpi_gbl_db_buffer; + return_buffer.length = ACPI_DEBUG_BUFFER_SIZE; + + status = acpi_get_possible_resources(node, &return_buffer); + if (ACPI_FAILURE(status)) { + acpi_os_printf("AcpiGetPossibleResources failed: %s\n", + acpi_format_exception(status)); + goto get_aei; + } + + acpi_rs_dump_resource_list(ACPI_CAST_PTR + (struct acpi_resource, + acpi_gbl_db_buffer)); + } + + /* _AEI */ + +get_aei: + if (aei_node) { + acpi_os_printf("Evaluating _AEI\n"); + + return_buffer.pointer = acpi_gbl_db_buffer; + return_buffer.length = ACPI_DEBUG_BUFFER_SIZE; + + status = + acpi_evaluate_object(aei_node, NULL, NULL, &return_buffer); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not evaluate _AEI: %s\n", + acpi_format_exception(status)); + goto cleanup; + } + + return_buffer.pointer = acpi_gbl_db_buffer; + return_buffer.length = ACPI_DEBUG_BUFFER_SIZE; + + status = acpi_get_event_resources(node, &return_buffer); + if (ACPI_FAILURE(status)) { + acpi_os_printf("AcpiGetEventResources failed: %s\n", + acpi_format_exception(status)); + goto cleanup; + } + + acpi_rs_dump_resource_list(ACPI_CAST_PTR + (struct acpi_resource, + acpi_gbl_db_buffer)); + } + +cleanup: + ACPI_FREE(parent_path); + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_resources + * + * PARAMETERS: object_arg - String object name or object pointer. + * NULL or "*" means "display resources for + * all devices" + * + * RETURN: None + * + * DESCRIPTION: Display the resource objects associated with a device. + * + ******************************************************************************/ + +void acpi_db_display_resources(char *object_arg) +{ + struct acpi_namespace_node *node; + + acpi_db_set_output_destination(ACPI_DB_REDIRECTABLE_OUTPUT); + acpi_dbg_level |= ACPI_LV_RESOURCES; + + /* Asterisk means "display resources for all devices" */ + + if (!object_arg || (!strcmp(object_arg, "*"))) { + (void)acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, + acpi_db_device_resources, NULL, NULL, + NULL); + } else { + /* Convert string to object pointer */ + + node = acpi_db_convert_to_node(object_arg); + if (node) { + if (node->type != ACPI_TYPE_DEVICE) { + acpi_os_printf + ("%4.4s: Name is not a device object (%s)\n", + node->name.ascii, + acpi_ut_get_type_name(node->type)); + } else { + (void)acpi_db_device_resources(node, 0, NULL, + NULL); + } + } + } + + acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT); +} + +#if (!ACPI_REDUCED_HARDWARE) +/******************************************************************************* + * + * FUNCTION: acpi_db_generate_gpe + * + * PARAMETERS: gpe_arg - Raw GPE number, ascii string + * block_arg - GPE block number, ascii string + * 0 or 1 for FADT GPE blocks + * + * RETURN: None + * + * DESCRIPTION: Simulate firing of a GPE + * + ******************************************************************************/ + +void acpi_db_generate_gpe(char *gpe_arg, char *block_arg) +{ + u32 block_number = 0; + u32 gpe_number; + struct acpi_gpe_event_info *gpe_event_info; + + gpe_number = strtoul(gpe_arg, NULL, 0); + + /* + * If no block arg, or block arg == 0 or 1, use the FADT-defined + * GPE blocks. + */ + if (block_arg) { + block_number = strtoul(block_arg, NULL, 0); + if (block_number == 1) { + block_number = 0; + } + } + + gpe_event_info = + acpi_ev_get_gpe_event_info(ACPI_TO_POINTER(block_number), + gpe_number); + if (!gpe_event_info) { + acpi_os_printf("Invalid GPE\n"); + return; + } + + (void)acpi_ev_gpe_dispatch(NULL, gpe_event_info, gpe_number); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_generate_sci + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Simulate an SCI -- just call the SCI dispatch. + * + ******************************************************************************/ + +void acpi_db_generate_sci(void) +{ + acpi_ev_sci_dispatch(); +} + +#endif /* !ACPI_REDUCED_HARDWARE */ + +/******************************************************************************* + * + * FUNCTION: acpi_db_trace + * + * PARAMETERS: enable_arg - ENABLE/AML to enable tracer + * DISABLE to disable tracer + * method_arg - Method to trace + * once_arg - Whether trace once + * + * RETURN: None + * + * DESCRIPTION: Control method tracing facility + * + ******************************************************************************/ + +void acpi_db_trace(char *enable_arg, char *method_arg, char *once_arg) +{ + u32 debug_level = 0; + u32 debug_layer = 0; + u32 flags = 0; + + if (enable_arg) { + acpi_ut_strupr(enable_arg); + } + + if (once_arg) { + acpi_ut_strupr(once_arg); + } + + if (method_arg) { + if (acpi_db_trace_method_name) { + ACPI_FREE(acpi_db_trace_method_name); + acpi_db_trace_method_name = NULL; + } + + acpi_db_trace_method_name = + ACPI_ALLOCATE(strlen(method_arg) + 1); + if (!acpi_db_trace_method_name) { + acpi_os_printf("Failed to allocate method name (%s)\n", + method_arg); + return; + } + + strcpy(acpi_db_trace_method_name, method_arg); + } + + if (!strcmp(enable_arg, "ENABLE") || + !strcmp(enable_arg, "METHOD") || !strcmp(enable_arg, "OPCODE")) { + if (!strcmp(enable_arg, "ENABLE")) { + + /* Inherit current console settings */ + + debug_level = acpi_gbl_db_console_debug_level; + debug_layer = acpi_dbg_layer; + } else { + /* Restrict console output to trace points only */ + + debug_level = ACPI_LV_TRACE_POINT; + debug_layer = ACPI_EXECUTER; + } + + flags = ACPI_TRACE_ENABLED; + + if (!strcmp(enable_arg, "OPCODE")) { + flags |= ACPI_TRACE_OPCODE; + } + + if (once_arg && !strcmp(once_arg, "ONCE")) { + flags |= ACPI_TRACE_ONESHOT; + } + } + + (void)acpi_debug_trace(acpi_db_trace_method_name, + debug_level, debug_layer, flags); +} diff --git a/drivers/acpi/acpica/dbconvert.c b/drivers/acpi/acpica/dbconvert.c new file mode 100644 index 000000000000..a71632ca8a81 --- /dev/null +++ b/drivers/acpi/acpica/dbconvert.c @@ -0,0 +1,484 @@ +/******************************************************************************* + * + * Module Name: dbconvert - debugger miscellaneous conversion routines + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acdebug.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbconvert") + +#define DB_DEFAULT_PKG_ELEMENTS 33 +/******************************************************************************* + * + * FUNCTION: acpi_db_hex_char_to_value + * + * PARAMETERS: hex_char - Ascii Hex digit, 0-9|a-f|A-F + * return_value - Where the converted value is returned + * + * RETURN: Status + * + * DESCRIPTION: Convert a single hex character to a 4-bit number (0-16). + * + ******************************************************************************/ +acpi_status acpi_db_hex_char_to_value(int hex_char, u8 *return_value) +{ + u8 value; + + /* Digit must be ascii [0-9a-fA-F] */ + + if (!isxdigit(hex_char)) { + return (AE_BAD_HEX_CONSTANT); + } + + if (hex_char <= 0x39) { + value = (u8)(hex_char - 0x30); + } else { + value = (u8)(toupper(hex_char) - 0x37); + } + + *return_value = value; + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_hex_byte_to_binary + * + * PARAMETERS: hex_byte - Double hex digit (0x00 - 0xFF) in format: + * hi_byte then lo_byte. + * return_value - Where the converted value is returned + * + * RETURN: Status + * + * DESCRIPTION: Convert two hex characters to an 8 bit number (0 - 255). + * + ******************************************************************************/ + +static acpi_status acpi_db_hex_byte_to_binary(char *hex_byte, u8 *return_value) +{ + u8 local0; + u8 local1; + acpi_status status; + + /* High byte */ + + status = acpi_db_hex_char_to_value(hex_byte[0], &local0); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Low byte */ + + status = acpi_db_hex_char_to_value(hex_byte[1], &local1); + if (ACPI_FAILURE(status)) { + return (status); + } + + *return_value = (u8)((local0 << 4) | local1); + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_convert_to_buffer + * + * PARAMETERS: string - Input string to be converted + * object - Where the buffer object is returned + * + * RETURN: Status + * + * DESCRIPTION: Convert a string to a buffer object. String is treated a list + * of buffer elements, each separated by a space or comma. + * + ******************************************************************************/ + +static acpi_status +acpi_db_convert_to_buffer(char *string, union acpi_object *object) +{ + u32 i; + u32 j; + u32 length; + u8 *buffer; + acpi_status status; + + /* Generate the final buffer length */ + + for (i = 0, length = 0; string[i];) { + i += 2; + length++; + + while (string[i] && ((string[i] == ',') || (string[i] == ' '))) { + i++; + } + } + + buffer = ACPI_ALLOCATE(length); + if (!buffer) { + return (AE_NO_MEMORY); + } + + /* Convert the command line bytes to the buffer */ + + for (i = 0, j = 0; string[i];) { + status = acpi_db_hex_byte_to_binary(&string[i], &buffer[j]); + if (ACPI_FAILURE(status)) { + ACPI_FREE(buffer); + return (status); + } + + j++; + i += 2; + while (string[i] && ((string[i] == ',') || (string[i] == ' '))) { + i++; + } + } + + object->type = ACPI_TYPE_BUFFER; + object->buffer.pointer = buffer; + object->buffer.length = length; + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_convert_to_package + * + * PARAMETERS: string - Input string to be converted + * object - Where the package object is returned + * + * RETURN: Status + * + * DESCRIPTION: Convert a string to a package object. Handles nested packages + * via recursion with acpi_db_convert_to_object. + * + ******************************************************************************/ + +acpi_status acpi_db_convert_to_package(char *string, union acpi_object * object) +{ + char *this; + char *next; + u32 i; + acpi_object_type type; + union acpi_object *elements; + acpi_status status; + + elements = + ACPI_ALLOCATE_ZEROED(DB_DEFAULT_PKG_ELEMENTS * + sizeof(union acpi_object)); + + this = string; + for (i = 0; i < (DB_DEFAULT_PKG_ELEMENTS - 1); i++) { + this = acpi_db_get_next_token(this, &next, &type); + if (!this) { + break; + } + + /* Recursive call to convert each package element */ + + status = acpi_db_convert_to_object(type, this, &elements[i]); + if (ACPI_FAILURE(status)) { + acpi_db_delete_objects(i + 1, elements); + ACPI_FREE(elements); + return (status); + } + + this = next; + } + + object->type = ACPI_TYPE_PACKAGE; + object->package.count = i; + object->package.elements = elements; + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_convert_to_object + * + * PARAMETERS: type - Object type as determined by parser + * string - Input string to be converted + * object - Where the new object is returned + * + * RETURN: Status + * + * DESCRIPTION: Convert a typed and tokenized string to an union acpi_object. Typing: + * 1) String objects were surrounded by quotes. + * 2) Buffer objects were surrounded by parentheses. + * 3) Package objects were surrounded by brackets "[]". + * 4) All standalone tokens are treated as integers. + * + ******************************************************************************/ + +acpi_status +acpi_db_convert_to_object(acpi_object_type type, + char *string, union acpi_object * object) +{ + acpi_status status = AE_OK; + + switch (type) { + case ACPI_TYPE_STRING: + + object->type = ACPI_TYPE_STRING; + object->string.pointer = string; + object->string.length = (u32)strlen(string); + break; + + case ACPI_TYPE_BUFFER: + + status = acpi_db_convert_to_buffer(string, object); + break; + + case ACPI_TYPE_PACKAGE: + + status = acpi_db_convert_to_package(string, object); + break; + + default: + + object->type = ACPI_TYPE_INTEGER; + status = acpi_ut_strtoul64(string, 16, &object->integer.value); + break; + } + + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_encode_pld_buffer + * + * PARAMETERS: pld_info - _PLD buffer struct (Using local struct) + * + * RETURN: Encode _PLD buffer suitable for return value from _PLD + * + * DESCRIPTION: Bit-packs a _PLD buffer struct. Used to test the _PLD macros + * + ******************************************************************************/ + +u8 *acpi_db_encode_pld_buffer(struct acpi_pld_info *pld_info) +{ + u32 *buffer; + u32 dword; + + buffer = ACPI_ALLOCATE_ZEROED(ACPI_PLD_BUFFER_SIZE); + if (!buffer) { + return (NULL); + } + + /* First 32 bits */ + + dword = 0; + ACPI_PLD_SET_REVISION(&dword, pld_info->revision); + ACPI_PLD_SET_IGNORE_COLOR(&dword, pld_info->ignore_color); + ACPI_PLD_SET_RED(&dword, pld_info->red); + ACPI_PLD_SET_GREEN(&dword, pld_info->green); + ACPI_PLD_SET_BLUE(&dword, pld_info->blue); + ACPI_MOVE_32_TO_32(&buffer[0], &dword); + + /* Second 32 bits */ + + dword = 0; + ACPI_PLD_SET_WIDTH(&dword, pld_info->width); + ACPI_PLD_SET_HEIGHT(&dword, pld_info->height); + ACPI_MOVE_32_TO_32(&buffer[1], &dword); + + /* Third 32 bits */ + + dword = 0; + ACPI_PLD_SET_USER_VISIBLE(&dword, pld_info->user_visible); + ACPI_PLD_SET_DOCK(&dword, pld_info->dock); + ACPI_PLD_SET_LID(&dword, pld_info->lid); + ACPI_PLD_SET_PANEL(&dword, pld_info->panel); + ACPI_PLD_SET_VERTICAL(&dword, pld_info->vertical_position); + ACPI_PLD_SET_HORIZONTAL(&dword, pld_info->horizontal_position); + ACPI_PLD_SET_SHAPE(&dword, pld_info->shape); + ACPI_PLD_SET_ORIENTATION(&dword, pld_info->group_orientation); + ACPI_PLD_SET_TOKEN(&dword, pld_info->group_token); + ACPI_PLD_SET_POSITION(&dword, pld_info->group_position); + ACPI_PLD_SET_BAY(&dword, pld_info->bay); + ACPI_MOVE_32_TO_32(&buffer[2], &dword); + + /* Fourth 32 bits */ + + dword = 0; + ACPI_PLD_SET_EJECTABLE(&dword, pld_info->ejectable); + ACPI_PLD_SET_OSPM_EJECT(&dword, pld_info->ospm_eject_required); + ACPI_PLD_SET_CABINET(&dword, pld_info->cabinet_number); + ACPI_PLD_SET_CARD_CAGE(&dword, pld_info->card_cage_number); + ACPI_PLD_SET_REFERENCE(&dword, pld_info->reference); + ACPI_PLD_SET_ROTATION(&dword, pld_info->rotation); + ACPI_PLD_SET_ORDER(&dword, pld_info->order); + ACPI_MOVE_32_TO_32(&buffer[3], &dword); + + if (pld_info->revision >= 2) { + + /* Fifth 32 bits */ + + dword = 0; + ACPI_PLD_SET_VERT_OFFSET(&dword, pld_info->vertical_offset); + ACPI_PLD_SET_HORIZ_OFFSET(&dword, pld_info->horizontal_offset); + ACPI_MOVE_32_TO_32(&buffer[4], &dword); + } + + return (ACPI_CAST_PTR(u8, buffer)); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_dump_pld_buffer + * + * PARAMETERS: obj_desc - Object returned from _PLD method + * + * RETURN: None. + * + * DESCRIPTION: Dumps formatted contents of a _PLD return buffer. + * + ******************************************************************************/ + +#define ACPI_PLD_OUTPUT "%20s : %-6X\n" + +void acpi_db_dump_pld_buffer(union acpi_object *obj_desc) +{ + union acpi_object *buffer_desc; + struct acpi_pld_info *pld_info; + u8 *new_buffer; + acpi_status status; + + /* Object must be of type Package with at least one Buffer element */ + + if (obj_desc->type != ACPI_TYPE_PACKAGE) { + return; + } + + buffer_desc = &obj_desc->package.elements[0]; + if (buffer_desc->type != ACPI_TYPE_BUFFER) { + return; + } + + /* Convert _PLD buffer to local _PLD struct */ + + status = acpi_decode_pld_buffer(buffer_desc->buffer.pointer, + buffer_desc->buffer.length, &pld_info); + if (ACPI_FAILURE(status)) { + return; + } + + /* Encode local _PLD struct back to a _PLD buffer */ + + new_buffer = acpi_db_encode_pld_buffer(pld_info); + if (!new_buffer) { + return; + } + + /* The two bit-packed buffers should match */ + + if (memcmp(new_buffer, buffer_desc->buffer.pointer, + buffer_desc->buffer.length)) { + acpi_os_printf + ("Converted _PLD buffer does not compare. New:\n"); + + acpi_ut_dump_buffer(new_buffer, + buffer_desc->buffer.length, DB_BYTE_DISPLAY, + 0); + } + + /* First 32-bit dword */ + + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Revision", pld_info->revision); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_IgnoreColor", + pld_info->ignore_color); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Red", pld_info->red); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Green", pld_info->green); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Blue", pld_info->blue); + + /* Second 32-bit dword */ + + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Width", pld_info->width); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Height", pld_info->height); + + /* Third 32-bit dword */ + + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_UserVisible", + pld_info->user_visible); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Dock", pld_info->dock); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Lid", pld_info->lid); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Panel", pld_info->panel); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_VerticalPosition", + pld_info->vertical_position); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_HorizontalPosition", + pld_info->horizontal_position); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Shape", pld_info->shape); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_GroupOrientation", + pld_info->group_orientation); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_GroupToken", + pld_info->group_token); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_GroupPosition", + pld_info->group_position); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Bay", pld_info->bay); + + /* Fourth 32-bit dword */ + + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Ejectable", pld_info->ejectable); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_EjectRequired", + pld_info->ospm_eject_required); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_CabinetNumber", + pld_info->cabinet_number); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_CardCageNumber", + pld_info->card_cage_number); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Reference", pld_info->reference); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Rotation", pld_info->rotation); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_Order", pld_info->order); + + /* Fifth 32-bit dword */ + + if (buffer_desc->buffer.length > 16) { + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_VerticalOffset", + pld_info->vertical_offset); + acpi_os_printf(ACPI_PLD_OUTPUT, "PLD_HorizontalOffset", + pld_info->horizontal_offset); + } + + ACPI_FREE(pld_info); + ACPI_FREE(new_buffer); +} diff --git a/drivers/acpi/acpica/dbdisply.c b/drivers/acpi/acpica/dbdisply.c new file mode 100644 index 000000000000..672977ec7c7d --- /dev/null +++ b/drivers/acpi/acpica/dbdisply.c @@ -0,0 +1,1108 @@ +/******************************************************************************* + * + * Module Name: dbdisply - debug display commands + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "amlcode.h" +#include "acdispat.h" +#include "acnamesp.h" +#include "acparser.h" +#include "acinterp.h" +#include "acdebug.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbdisply") + +/* Local prototypes */ +static void acpi_db_dump_parser_descriptor(union acpi_parse_object *op); + +static void *acpi_db_get_pointer(void *target); + +static acpi_status +acpi_db_display_non_root_handlers(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value); + +/* + * System handler information. + * Used for Handlers command, in acpi_db_display_handlers. + */ +#define ACPI_PREDEFINED_PREFIX "%25s (%.2X) : " +#define ACPI_HANDLER_NAME_STRING "%30s : " +#define ACPI_HANDLER_PRESENT_STRING "%-9s (%p)\n" +#define ACPI_HANDLER_PRESENT_STRING2 "%-9s (%p)" +#define ACPI_HANDLER_NOT_PRESENT_STRING "%-9s\n" + +/* All predefined Address Space IDs */ + +static acpi_adr_space_type acpi_gbl_space_id_list[] = { + ACPI_ADR_SPACE_SYSTEM_MEMORY, + ACPI_ADR_SPACE_SYSTEM_IO, + ACPI_ADR_SPACE_PCI_CONFIG, + ACPI_ADR_SPACE_EC, + ACPI_ADR_SPACE_SMBUS, + ACPI_ADR_SPACE_CMOS, + ACPI_ADR_SPACE_PCI_BAR_TARGET, + ACPI_ADR_SPACE_IPMI, + ACPI_ADR_SPACE_GPIO, + ACPI_ADR_SPACE_GSBUS, + ACPI_ADR_SPACE_DATA_TABLE, + ACPI_ADR_SPACE_FIXED_HARDWARE +}; + +/* Global handler information */ + +typedef struct acpi_handler_info { + void *handler; + char *name; + +} acpi_handler_info; + +static struct acpi_handler_info acpi_gbl_handler_list[] = { + {&acpi_gbl_global_notify[0].handler, "System Notifications"}, + {&acpi_gbl_global_notify[1].handler, "Device Notifications"}, + {&acpi_gbl_table_handler, "ACPI Table Events"}, + {&acpi_gbl_exception_handler, "Control Method Exceptions"}, + {&acpi_gbl_interface_handler, "OSI Invocations"} +}; + +/******************************************************************************* + * + * FUNCTION: acpi_db_get_pointer + * + * PARAMETERS: target - Pointer to string to be converted + * + * RETURN: Converted pointer + * + * DESCRIPTION: Convert an ascii pointer value to a real value + * + ******************************************************************************/ + +static void *acpi_db_get_pointer(void *target) +{ + void *obj_ptr; + acpi_size address; + + address = strtoul(target, NULL, 16); + obj_ptr = ACPI_TO_POINTER(address); + return (obj_ptr); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_dump_parser_descriptor + * + * PARAMETERS: op - A parser Op descriptor + * + * RETURN: None + * + * DESCRIPTION: Display a formatted parser object + * + ******************************************************************************/ + +static void acpi_db_dump_parser_descriptor(union acpi_parse_object *op) +{ + const struct acpi_opcode_info *info; + + info = acpi_ps_get_opcode_info(op->common.aml_opcode); + + acpi_os_printf("Parser Op Descriptor:\n"); + acpi_os_printf("%20.20s : %4.4X\n", "Opcode", op->common.aml_opcode); + + ACPI_DEBUG_ONLY_MEMBERS(acpi_os_printf("%20.20s : %s\n", "Opcode Name", + info->name)); + + acpi_os_printf("%20.20s : %p\n", "Value/ArgList", op->common.value.arg); + acpi_os_printf("%20.20s : %p\n", "Parent", op->common.parent); + acpi_os_printf("%20.20s : %p\n", "NextOp", op->common.next); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_decode_and_display_object + * + * PARAMETERS: target - String with object to be displayed. Names + * and hex pointers are supported. + * output_type - Byte, Word, Dword, or Qword (B|W|D|Q) + * + * RETURN: None + * + * DESCRIPTION: Display a formatted ACPI object + * + ******************************************************************************/ + +void acpi_db_decode_and_display_object(char *target, char *output_type) +{ + void *obj_ptr; + struct acpi_namespace_node *node; + union acpi_operand_object *obj_desc; + u32 display = DB_BYTE_DISPLAY; + char buffer[80]; + struct acpi_buffer ret_buf; + acpi_status status; + u32 size; + + if (!target) { + return; + } + + /* Decode the output type */ + + if (output_type) { + acpi_ut_strupr(output_type); + if (output_type[0] == 'W') { + display = DB_WORD_DISPLAY; + } else if (output_type[0] == 'D') { + display = DB_DWORD_DISPLAY; + } else if (output_type[0] == 'Q') { + display = DB_QWORD_DISPLAY; + } + } + + ret_buf.length = sizeof(buffer); + ret_buf.pointer = buffer; + + /* Differentiate between a number and a name */ + + if ((target[0] >= 0x30) && (target[0] <= 0x39)) { + obj_ptr = acpi_db_get_pointer(target); + if (!acpi_os_readable(obj_ptr, 16)) { + acpi_os_printf + ("Address %p is invalid in this address space\n", + obj_ptr); + return; + } + + /* Decode the object type */ + + switch (ACPI_GET_DESCRIPTOR_TYPE(obj_ptr)) { + case ACPI_DESC_TYPE_NAMED: + + /* This is a namespace Node */ + + if (!acpi_os_readable + (obj_ptr, sizeof(struct acpi_namespace_node))) { + acpi_os_printf + ("Cannot read entire Named object at address %p\n", + obj_ptr); + return; + } + + node = obj_ptr; + goto dump_node; + + case ACPI_DESC_TYPE_OPERAND: + + /* This is a ACPI OPERAND OBJECT */ + + if (!acpi_os_readable + (obj_ptr, sizeof(union acpi_operand_object))) { + acpi_os_printf + ("Cannot read entire ACPI object at address %p\n", + obj_ptr); + return; + } + + acpi_ut_debug_dump_buffer(obj_ptr, + sizeof(union + acpi_operand_object), + display, ACPI_UINT32_MAX); + acpi_ex_dump_object_descriptor(obj_ptr, 1); + break; + + case ACPI_DESC_TYPE_PARSER: + + /* This is a Parser Op object */ + + if (!acpi_os_readable + (obj_ptr, sizeof(union acpi_parse_object))) { + acpi_os_printf + ("Cannot read entire Parser object at address %p\n", + obj_ptr); + return; + } + + acpi_ut_debug_dump_buffer(obj_ptr, + sizeof(union + acpi_parse_object), + display, ACPI_UINT32_MAX); + acpi_db_dump_parser_descriptor((union acpi_parse_object + *)obj_ptr); + break; + + default: + + /* Is not a recognizeable object */ + + acpi_os_printf + ("Not a known ACPI internal object, descriptor type %2.2X\n", + ACPI_GET_DESCRIPTOR_TYPE(obj_ptr)); + + size = 16; + if (acpi_os_readable(obj_ptr, 64)) { + size = 64; + } + + /* Just dump some memory */ + + acpi_ut_debug_dump_buffer(obj_ptr, size, display, + ACPI_UINT32_MAX); + break; + } + + return; + } + + /* The parameter is a name string that must be resolved to a Named obj */ + + node = acpi_db_local_ns_lookup(target); + if (!node) { + return; + } + +dump_node: + /* Now dump the NS node */ + + status = acpi_get_name(node, ACPI_FULL_PATHNAME_NO_TRAILING, &ret_buf); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not convert name to pathname\n"); + } + + else { + acpi_os_printf("Object (%p) Pathname: %s\n", + node, (char *)ret_buf.pointer); + } + + if (!acpi_os_readable(node, sizeof(struct acpi_namespace_node))) { + acpi_os_printf("Invalid Named object at address %p\n", node); + return; + } + + acpi_ut_debug_dump_buffer((void *)node, + sizeof(struct acpi_namespace_node), display, + ACPI_UINT32_MAX); + acpi_ex_dump_namespace_node(node, 1); + + obj_desc = acpi_ns_get_attached_object(node); + if (obj_desc) { + acpi_os_printf("\nAttached Object (%p):\n", obj_desc); + if (!acpi_os_readable + (obj_desc, sizeof(union acpi_operand_object))) { + acpi_os_printf + ("Invalid internal ACPI Object at address %p\n", + obj_desc); + return; + } + + acpi_ut_debug_dump_buffer((void *)obj_desc, + sizeof(union acpi_operand_object), + display, ACPI_UINT32_MAX); + acpi_ex_dump_object_descriptor(obj_desc, 1); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_method_info + * + * PARAMETERS: start_op - Root of the control method parse tree + * + * RETURN: None + * + * DESCRIPTION: Display information about the current method + * + ******************************************************************************/ + +void acpi_db_display_method_info(union acpi_parse_object *start_op) +{ + struct acpi_walk_state *walk_state; + union acpi_operand_object *obj_desc; + struct acpi_namespace_node *node; + union acpi_parse_object *root_op; + union acpi_parse_object *op; + const struct acpi_opcode_info *op_info; + u32 num_ops = 0; + u32 num_operands = 0; + u32 num_operators = 0; + u32 num_remaining_ops = 0; + u32 num_remaining_operands = 0; + u32 num_remaining_operators = 0; + u8 count_remaining = FALSE; + + walk_state = acpi_ds_get_current_walk_state(acpi_gbl_current_walk_list); + if (!walk_state) { + acpi_os_printf("There is no method currently executing\n"); + return; + } + + obj_desc = walk_state->method_desc; + node = walk_state->method_node; + + acpi_os_printf("Currently executing control method is [%4.4s]\n", + acpi_ut_get_node_name(node)); + acpi_os_printf("%X Arguments, SyncLevel = %X\n", + (u32)obj_desc->method.param_count, + (u32)obj_desc->method.sync_level); + + root_op = start_op; + while (root_op->common.parent) { + root_op = root_op->common.parent; + } + + op = root_op; + + while (op) { + if (op == start_op) { + count_remaining = TRUE; + } + + num_ops++; + if (count_remaining) { + num_remaining_ops++; + } + + /* Decode the opcode */ + + op_info = acpi_ps_get_opcode_info(op->common.aml_opcode); + switch (op_info->class) { + case AML_CLASS_ARGUMENT: + + if (count_remaining) { + num_remaining_operands++; + } + + num_operands++; + break; + + case AML_CLASS_UNKNOWN: + + /* Bad opcode or ASCII character */ + + continue; + + default: + + if (count_remaining) { + num_remaining_operators++; + } + + num_operators++; + break; + } + + op = acpi_ps_get_depth_next(start_op, op); + } + + acpi_os_printf + ("Method contains: %X AML Opcodes - %X Operators, %X Operands\n", + num_ops, num_operators, num_operands); + + acpi_os_printf + ("Remaining to execute: %X AML Opcodes - %X Operators, %X Operands\n", + num_remaining_ops, num_remaining_operators, + num_remaining_operands); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_locals + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Display all locals for the currently running control method + * + ******************************************************************************/ + +void acpi_db_display_locals(void) +{ + struct acpi_walk_state *walk_state; + + walk_state = acpi_ds_get_current_walk_state(acpi_gbl_current_walk_list); + if (!walk_state) { + acpi_os_printf("There is no method currently executing\n"); + return; + } + + acpi_db_decode_locals(walk_state); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_arguments + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Display all arguments for the currently running control method + * + ******************************************************************************/ + +void acpi_db_display_arguments(void) +{ + struct acpi_walk_state *walk_state; + + walk_state = acpi_ds_get_current_walk_state(acpi_gbl_current_walk_list); + if (!walk_state) { + acpi_os_printf("There is no method currently executing\n"); + return; + } + + acpi_db_decode_arguments(walk_state); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_results + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Display current contents of a method result stack + * + ******************************************************************************/ + +void acpi_db_display_results(void) +{ + u32 i; + struct acpi_walk_state *walk_state; + union acpi_operand_object *obj_desc; + u32 result_count = 0; + struct acpi_namespace_node *node; + union acpi_generic_state *frame; + u32 index; /* Index onto current frame */ + + walk_state = acpi_ds_get_current_walk_state(acpi_gbl_current_walk_list); + if (!walk_state) { + acpi_os_printf("There is no method currently executing\n"); + return; + } + + obj_desc = walk_state->method_desc; + node = walk_state->method_node; + + if (walk_state->results) { + result_count = walk_state->result_count; + } + + acpi_os_printf("Method [%4.4s] has %X stacked result objects\n", + acpi_ut_get_node_name(node), result_count); + + /* From the top element of result stack */ + + frame = walk_state->results; + index = (result_count - 1) % ACPI_RESULTS_FRAME_OBJ_NUM; + + for (i = 0; i < result_count; i++) { + obj_desc = frame->results.obj_desc[index]; + acpi_os_printf("Result%u: ", i); + acpi_db_display_internal_object(obj_desc, walk_state); + + if (index == 0) { + frame = frame->results.next; + index = ACPI_RESULTS_FRAME_OBJ_NUM; + } + + index--; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_calling_tree + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Display current calling tree of nested control methods + * + ******************************************************************************/ + +void acpi_db_display_calling_tree(void) +{ + struct acpi_walk_state *walk_state; + struct acpi_namespace_node *node; + + walk_state = acpi_ds_get_current_walk_state(acpi_gbl_current_walk_list); + if (!walk_state) { + acpi_os_printf("There is no method currently executing\n"); + return; + } + + node = walk_state->method_node; + acpi_os_printf("Current Control Method Call Tree\n"); + + while (walk_state) { + node = walk_state->method_node; + acpi_os_printf(" [%4.4s]\n", acpi_ut_get_node_name(node)); + + walk_state = walk_state->next; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_object_type + * + * PARAMETERS: name - User entered NS node handle or name + * + * RETURN: None + * + * DESCRIPTION: Display type of an arbitrary NS node + * + ******************************************************************************/ + +void acpi_db_display_object_type(char *name) +{ + struct acpi_namespace_node *node; + struct acpi_device_info *info; + acpi_status status; + u32 i; + + node = acpi_db_convert_to_node(name); + if (!node) { + return; + } + + status = acpi_get_object_info(ACPI_CAST_PTR(acpi_handle, node), &info); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not get object info, %s\n", + acpi_format_exception(status)); + return; + } + + if (info->valid & ACPI_VALID_ADR) { + acpi_os_printf("ADR: %8.8X%8.8X, STA: %8.8X, Flags: %X\n", + ACPI_FORMAT_UINT64(info->address), + info->current_status, info->flags); + } + if (info->valid & ACPI_VALID_SXDS) { + acpi_os_printf("S1D-%2.2X S2D-%2.2X S3D-%2.2X S4D-%2.2X\n", + info->highest_dstates[0], + info->highest_dstates[1], + info->highest_dstates[2], + info->highest_dstates[3]); + } + if (info->valid & ACPI_VALID_SXWS) { + acpi_os_printf + ("S0W-%2.2X S1W-%2.2X S2W-%2.2X S3W-%2.2X S4W-%2.2X\n", + info->lowest_dstates[0], info->lowest_dstates[1], + info->lowest_dstates[2], info->lowest_dstates[3], + info->lowest_dstates[4]); + } + + if (info->valid & ACPI_VALID_HID) { + acpi_os_printf("HID: %s\n", info->hardware_id.string); + } + + if (info->valid & ACPI_VALID_UID) { + acpi_os_printf("UID: %s\n", info->unique_id.string); + } + + if (info->valid & ACPI_VALID_SUB) { + acpi_os_printf("SUB: %s\n", info->subsystem_id.string); + } + + if (info->valid & ACPI_VALID_CID) { + for (i = 0; i < info->compatible_id_list.count; i++) { + acpi_os_printf("CID %u: %s\n", i, + info->compatible_id_list.ids[i].string); + } + } + + ACPI_FREE(info); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_result_object + * + * PARAMETERS: obj_desc - Object to be displayed + * walk_state - Current walk state + * + * RETURN: None + * + * DESCRIPTION: Display the result of an AML opcode + * + * Note: Curently only displays the result object if we are single stepping. + * However, this output may be useful in other contexts and could be enabled + * to do so if needed. + * + ******************************************************************************/ + +void +acpi_db_display_result_object(union acpi_operand_object *obj_desc, + struct acpi_walk_state *walk_state) +{ + + /* Only display if single stepping */ + + if (!acpi_gbl_cm_single_step) { + return; + } + + acpi_os_printf("ResultObj: "); + acpi_db_display_internal_object(obj_desc, walk_state); + acpi_os_printf("\n"); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_argument_object + * + * PARAMETERS: obj_desc - Object to be displayed + * walk_state - Current walk state + * + * RETURN: None + * + * DESCRIPTION: Display the result of an AML opcode + * + ******************************************************************************/ + +void +acpi_db_display_argument_object(union acpi_operand_object *obj_desc, + struct acpi_walk_state *walk_state) +{ + + if (!acpi_gbl_cm_single_step) { + return; + } + + acpi_os_printf("ArgObj: "); + acpi_db_display_internal_object(obj_desc, walk_state); +} + +#if (!ACPI_REDUCED_HARDWARE) +/******************************************************************************* + * + * FUNCTION: acpi_db_display_gpes + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Display the current GPE structures + * + ******************************************************************************/ + +void acpi_db_display_gpes(void) +{ + struct acpi_gpe_block_info *gpe_block; + struct acpi_gpe_xrupt_info *gpe_xrupt_info; + struct acpi_gpe_event_info *gpe_event_info; + struct acpi_gpe_register_info *gpe_register_info; + char *gpe_type; + struct acpi_gpe_notify_info *notify; + u32 gpe_index; + u32 block = 0; + u32 i; + u32 j; + u32 count; + char buffer[80]; + struct acpi_buffer ret_buf; + acpi_status status; + + ret_buf.length = sizeof(buffer); + ret_buf.pointer = buffer; + + block = 0; + + /* Walk the GPE lists */ + + gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head; + while (gpe_xrupt_info) { + gpe_block = gpe_xrupt_info->gpe_block_list_head; + while (gpe_block) { + status = acpi_get_name(gpe_block->node, + ACPI_FULL_PATHNAME_NO_TRAILING, + &ret_buf); + if (ACPI_FAILURE(status)) { + acpi_os_printf + ("Could not convert name to pathname\n"); + } + + if (gpe_block->node == acpi_gbl_fadt_gpe_device) { + gpe_type = "FADT-defined GPE block"; + } else { + gpe_type = "GPE Block Device"; + } + + acpi_os_printf + ("\nBlock %u - Info %p DeviceNode %p [%s] - %s\n", + block, gpe_block, gpe_block->node, buffer, + gpe_type); + + acpi_os_printf(" Registers: %u (%u GPEs)\n", + gpe_block->register_count, + gpe_block->gpe_count); + + acpi_os_printf + (" GPE range: 0x%X to 0x%X on interrupt %u\n", + gpe_block->block_base_number, + gpe_block->block_base_number + + (gpe_block->gpe_count - 1), + gpe_xrupt_info->interrupt_number); + + acpi_os_printf + (" RegisterInfo: %p Status %8.8X%8.8X Enable %8.8X%8.8X\n", + gpe_block->register_info, + ACPI_FORMAT_UINT64(gpe_block->register_info-> + status_address.address), + ACPI_FORMAT_UINT64(gpe_block->register_info-> + enable_address.address)); + + acpi_os_printf(" EventInfo: %p\n", + gpe_block->event_info); + + /* Examine each GPE Register within the block */ + + for (i = 0; i < gpe_block->register_count; i++) { + gpe_register_info = + &gpe_block->register_info[i]; + + acpi_os_printf(" Reg %u: (GPE %.2X-%.2X) " + "RunEnable %2.2X WakeEnable %2.2X" + " Status %8.8X%8.8X Enable %8.8X%8.8X\n", + i, + gpe_register_info-> + base_gpe_number, + gpe_register_info-> + base_gpe_number + + (ACPI_GPE_REGISTER_WIDTH - 1), + gpe_register_info-> + enable_for_run, + gpe_register_info-> + enable_for_wake, + ACPI_FORMAT_UINT64 + (gpe_register_info-> + status_address.address), + ACPI_FORMAT_UINT64 + (gpe_register_info-> + enable_address.address)); + + /* Now look at the individual GPEs in this byte register */ + + for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) { + gpe_index = + (i * ACPI_GPE_REGISTER_WIDTH) + j; + gpe_event_info = + &gpe_block->event_info[gpe_index]; + + if (ACPI_GPE_DISPATCH_TYPE + (gpe_event_info->flags) == + ACPI_GPE_DISPATCH_NONE) { + + /* This GPE is not used (no method or handler), ignore it */ + + continue; + } + + acpi_os_printf + (" GPE %.2X: %p RunRefs %2.2X Flags %2.2X (", + gpe_block->block_base_number + + gpe_index, gpe_event_info, + gpe_event_info->runtime_count, + gpe_event_info->flags); + + /* Decode the flags byte */ + + if (gpe_event_info-> + flags & ACPI_GPE_LEVEL_TRIGGERED) { + acpi_os_printf("Level, "); + } else { + acpi_os_printf("Edge, "); + } + + if (gpe_event_info-> + flags & ACPI_GPE_CAN_WAKE) { + acpi_os_printf("CanWake, "); + } else { + acpi_os_printf("RunOnly, "); + } + + switch (ACPI_GPE_DISPATCH_TYPE + (gpe_event_info->flags)) { + case ACPI_GPE_DISPATCH_NONE: + + acpi_os_printf("NotUsed"); + break; + + case ACPI_GPE_DISPATCH_METHOD: + + acpi_os_printf("Method"); + break; + + case ACPI_GPE_DISPATCH_HANDLER: + + acpi_os_printf("Handler"); + break; + + case ACPI_GPE_DISPATCH_NOTIFY: + + count = 0; + notify = + gpe_event_info->dispatch. + notify_list; + while (notify) { + count++; + notify = notify->next; + } + + acpi_os_printf + ("Implicit Notify on %u devices", + count); + break; + + case ACPI_GPE_DISPATCH_RAW_HANDLER: + + acpi_os_printf("RawHandler"); + break; + + default: + + acpi_os_printf("UNKNOWN: %X", + ACPI_GPE_DISPATCH_TYPE + (gpe_event_info-> + flags)); + break; + } + + acpi_os_printf(")\n"); + } + } + + block++; + gpe_block = gpe_block->next; + } + + gpe_xrupt_info = gpe_xrupt_info->next; + } +} +#endif /* !ACPI_REDUCED_HARDWARE */ + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_handlers + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Display the currently installed global handlers + * + ******************************************************************************/ + +void acpi_db_display_handlers(void) +{ + union acpi_operand_object *obj_desc; + union acpi_operand_object *handler_obj; + acpi_adr_space_type space_id; + u32 i; + + /* Operation region handlers */ + + acpi_os_printf("\nOperation Region Handlers at the namespace root:\n"); + + obj_desc = acpi_ns_get_attached_object(acpi_gbl_root_node); + if (obj_desc) { + for (i = 0; i < ACPI_ARRAY_LENGTH(acpi_gbl_space_id_list); i++) { + space_id = acpi_gbl_space_id_list[i]; + handler_obj = obj_desc->device.handler; + + acpi_os_printf(ACPI_PREDEFINED_PREFIX, + acpi_ut_get_region_name((u8)space_id), + space_id); + + while (handler_obj) { + if (acpi_gbl_space_id_list[i] == + handler_obj->address_space.space_id) { + acpi_os_printf + (ACPI_HANDLER_PRESENT_STRING, + (handler_obj->address_space. + handler_flags & + ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) + ? "Default" : "User", + handler_obj->address_space. + handler); + + goto found_handler; + } + + handler_obj = handler_obj->address_space.next; + } + + /* There is no handler for this space_id */ + + acpi_os_printf("None\n"); + +found_handler: ; + } + + /* Find all handlers for user-defined space_IDs */ + + handler_obj = obj_desc->device.handler; + while (handler_obj) { + if (handler_obj->address_space.space_id >= + ACPI_USER_REGION_BEGIN) { + acpi_os_printf(ACPI_PREDEFINED_PREFIX, + "User-defined ID", + handler_obj->address_space. + space_id); + acpi_os_printf(ACPI_HANDLER_PRESENT_STRING, + (handler_obj->address_space. + handler_flags & + ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) + ? "Default" : "User", + handler_obj->address_space. + handler); + } + + handler_obj = handler_obj->address_space.next; + } + } +#if (!ACPI_REDUCED_HARDWARE) + + /* Fixed event handlers */ + + acpi_os_printf("\nFixed Event Handlers:\n"); + + for (i = 0; i < ACPI_NUM_FIXED_EVENTS; i++) { + acpi_os_printf(ACPI_PREDEFINED_PREFIX, + acpi_ut_get_event_name(i), i); + if (acpi_gbl_fixed_event_handlers[i].handler) { + acpi_os_printf(ACPI_HANDLER_PRESENT_STRING, "User", + acpi_gbl_fixed_event_handlers[i]. + handler); + } else { + acpi_os_printf(ACPI_HANDLER_NOT_PRESENT_STRING, "None"); + } + } + +#endif /* !ACPI_REDUCED_HARDWARE */ + + /* Miscellaneous global handlers */ + + acpi_os_printf("\nMiscellaneous Global Handlers:\n"); + + for (i = 0; i < ACPI_ARRAY_LENGTH(acpi_gbl_handler_list); i++) { + acpi_os_printf(ACPI_HANDLER_NAME_STRING, + acpi_gbl_handler_list[i].name); + + if (acpi_gbl_handler_list[i].handler) { + acpi_os_printf(ACPI_HANDLER_PRESENT_STRING, "User", + acpi_gbl_handler_list[i].handler); + } else { + acpi_os_printf(ACPI_HANDLER_NOT_PRESENT_STRING, "None"); + } + } + + /* Other handlers that are installed throughout the namespace */ + + acpi_os_printf("\nOperation Region Handlers for specific devices:\n"); + + (void)acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, + acpi_db_display_non_root_handlers, NULL, NULL, + NULL); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_non_root_handlers + * + * PARAMETERS: acpi_walk_callback + * + * RETURN: Status + * + * DESCRIPTION: Display information about all handlers installed for a + * device object. + * + ******************************************************************************/ + +static acpi_status +acpi_db_display_non_root_handlers(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value) +{ + struct acpi_namespace_node *node = + ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle); + union acpi_operand_object *obj_desc; + union acpi_operand_object *handler_obj; + char *pathname; + + obj_desc = acpi_ns_get_attached_object(node); + if (!obj_desc) { + return (AE_OK); + } + + pathname = acpi_ns_get_external_pathname(node); + if (!pathname) { + return (AE_OK); + } + + /* Display all handlers associated with this device */ + + handler_obj = obj_desc->device.handler; + while (handler_obj) { + acpi_os_printf(ACPI_PREDEFINED_PREFIX, + acpi_ut_get_region_name((u8)handler_obj-> + address_space.space_id), + handler_obj->address_space.space_id); + + acpi_os_printf(ACPI_HANDLER_PRESENT_STRING2, + (handler_obj->address_space.handler_flags & + ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) ? "Default" + : "User", handler_obj->address_space.handler); + + acpi_os_printf(" Device Name: %s (%p)\n", pathname, node); + + handler_obj = handler_obj->address_space.next; + } + + ACPI_FREE(pathname); + return (AE_OK); +} diff --git a/drivers/acpi/acpica/dbexec.c b/drivers/acpi/acpica/dbexec.c new file mode 100644 index 000000000000..8eef298963a2 --- /dev/null +++ b/drivers/acpi/acpica/dbexec.c @@ -0,0 +1,753 @@ +/******************************************************************************* + * + * Module Name: dbexec - debugger control method execution + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acdebug.h" +#include "acnamesp.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbexec") + +static struct acpi_db_method_info acpi_gbl_db_method_info; + +/* Local prototypes */ + +static acpi_status +acpi_db_execute_method(struct acpi_db_method_info *info, + struct acpi_buffer *return_obj); + +static acpi_status acpi_db_execute_setup(struct acpi_db_method_info *info); + +static u32 acpi_db_get_outstanding_allocations(void); + +static void ACPI_SYSTEM_XFACE acpi_db_method_thread(void *context); + +static acpi_status +acpi_db_execution_walk(acpi_handle obj_handle, + u32 nesting_level, void *context, void **return_value); + +/******************************************************************************* + * + * FUNCTION: acpi_db_delete_objects + * + * PARAMETERS: count - Count of objects in the list + * objects - Array of ACPI_OBJECTs to be deleted + * + * RETURN: None + * + * DESCRIPTION: Delete a list of ACPI_OBJECTS. Handles packages and nested + * packages via recursion. + * + ******************************************************************************/ + +void acpi_db_delete_objects(u32 count, union acpi_object *objects) +{ + u32 i; + + for (i = 0; i < count; i++) { + switch (objects[i].type) { + case ACPI_TYPE_BUFFER: + + ACPI_FREE(objects[i].buffer.pointer); + break; + + case ACPI_TYPE_PACKAGE: + + /* Recursive call to delete package elements */ + + acpi_db_delete_objects(objects[i].package.count, + objects[i].package.elements); + + /* Free the elements array */ + + ACPI_FREE(objects[i].package.elements); + break; + + default: + + break; + } + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_execute_method + * + * PARAMETERS: info - Valid info segment + * return_obj - Where to put return object + * + * RETURN: Status + * + * DESCRIPTION: Execute a control method. + * + ******************************************************************************/ + +static acpi_status +acpi_db_execute_method(struct acpi_db_method_info *info, + struct acpi_buffer *return_obj) +{ + acpi_status status; + struct acpi_object_list param_objects; + union acpi_object params[ACPI_DEBUGGER_MAX_ARGS + 1]; + u32 i; + + ACPI_FUNCTION_TRACE(db_execute_method); + + if (acpi_gbl_db_output_to_file && !acpi_dbg_level) { + acpi_os_printf("Warning: debug output is not enabled!\n"); + } + + param_objects.count = 0; + param_objects.pointer = NULL; + + /* Pass through any command-line arguments */ + + if (info->args && info->args[0]) { + + /* Get arguments passed on the command line */ + + for (i = 0; (info->args[i] && *(info->args[i])); i++) { + + /* Convert input string (token) to an actual union acpi_object */ + + status = acpi_db_convert_to_object(info->types[i], + info->args[i], + ¶ms[i]); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "While parsing method arguments")); + goto cleanup; + } + } + + param_objects.count = i; + param_objects.pointer = params; + } + + /* Prepare for a return object of arbitrary size */ + + return_obj->pointer = acpi_gbl_db_buffer; + return_obj->length = ACPI_DEBUG_BUFFER_SIZE; + + /* Do the actual method execution */ + + acpi_gbl_method_executing = TRUE; + status = acpi_evaluate_object(NULL, info->pathname, + ¶m_objects, return_obj); + + acpi_gbl_cm_single_step = FALSE; + acpi_gbl_method_executing = FALSE; + + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "while executing %s from debugger", + info->pathname)); + + if (status == AE_BUFFER_OVERFLOW) { + ACPI_ERROR((AE_INFO, + "Possible overflow of internal debugger " + "buffer (size 0x%X needed 0x%X)", + ACPI_DEBUG_BUFFER_SIZE, + (u32)return_obj->length)); + } + } + +cleanup: + acpi_db_delete_objects(param_objects.count, params); + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_execute_setup + * + * PARAMETERS: info - Valid method info + * + * RETURN: None + * + * DESCRIPTION: Setup info segment prior to method execution + * + ******************************************************************************/ + +static acpi_status acpi_db_execute_setup(struct acpi_db_method_info *info) +{ + acpi_status status; + + ACPI_FUNCTION_NAME(db_execute_setup); + + /* Catenate the current scope to the supplied name */ + + info->pathname[0] = 0; + if ((info->name[0] != '\\') && (info->name[0] != '/')) { + if (acpi_ut_safe_strcat(info->pathname, sizeof(info->pathname), + acpi_gbl_db_scope_buf)) { + status = AE_BUFFER_OVERFLOW; + goto error_exit; + } + } + + if (acpi_ut_safe_strcat(info->pathname, sizeof(info->pathname), + info->name)) { + status = AE_BUFFER_OVERFLOW; + goto error_exit; + } + + acpi_db_prep_namestring(info->pathname); + + acpi_db_set_output_destination(ACPI_DB_DUPLICATE_OUTPUT); + acpi_os_printf("Evaluating %s\n", info->pathname); + + if (info->flags & EX_SINGLE_STEP) { + acpi_gbl_cm_single_step = TRUE; + acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT); + } + + else { + /* No single step, allow redirection to a file */ + + acpi_db_set_output_destination(ACPI_DB_REDIRECTABLE_OUTPUT); + } + + return (AE_OK); + +error_exit: + + ACPI_EXCEPTION((AE_INFO, status, "During setup for method execution")); + return (status); +} + +#ifdef ACPI_DBG_TRACK_ALLOCATIONS +u32 acpi_db_get_cache_info(struct acpi_memory_list *cache) +{ + + return (cache->total_allocated - cache->total_freed - + cache->current_depth); +} +#endif + +/******************************************************************************* + * + * FUNCTION: acpi_db_get_outstanding_allocations + * + * PARAMETERS: None + * + * RETURN: Current global allocation count minus cache entries + * + * DESCRIPTION: Determine the current number of "outstanding" allocations -- + * those allocations that have not been freed and also are not + * in one of the various object caches. + * + ******************************************************************************/ + +static u32 acpi_db_get_outstanding_allocations(void) +{ + u32 outstanding = 0; + +#ifdef ACPI_DBG_TRACK_ALLOCATIONS + + outstanding += acpi_db_get_cache_info(acpi_gbl_state_cache); + outstanding += acpi_db_get_cache_info(acpi_gbl_ps_node_cache); + outstanding += acpi_db_get_cache_info(acpi_gbl_ps_node_ext_cache); + outstanding += acpi_db_get_cache_info(acpi_gbl_operand_cache); +#endif + + return (outstanding); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_execution_walk + * + * PARAMETERS: WALK_CALLBACK + * + * RETURN: Status + * + * DESCRIPTION: Execute a control method. Name is relative to the current + * scope. + * + ******************************************************************************/ + +static acpi_status +acpi_db_execution_walk(acpi_handle obj_handle, + u32 nesting_level, void *context, void **return_value) +{ + union acpi_operand_object *obj_desc; + struct acpi_namespace_node *node = + (struct acpi_namespace_node *)obj_handle; + struct acpi_buffer return_obj; + acpi_status status; + + obj_desc = acpi_ns_get_attached_object(node); + if (obj_desc->method.param_count) { + return (AE_OK); + } + + return_obj.pointer = NULL; + return_obj.length = ACPI_ALLOCATE_BUFFER; + + acpi_ns_print_node_pathname(node, "Evaluating"); + + /* Do the actual method execution */ + + acpi_os_printf("\n"); + acpi_gbl_method_executing = TRUE; + + status = acpi_evaluate_object(node, NULL, NULL, &return_obj); + + acpi_os_printf("Evaluation of [%4.4s] returned %s\n", + acpi_ut_get_node_name(node), + acpi_format_exception(status)); + + acpi_gbl_method_executing = FALSE; + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_execute + * + * PARAMETERS: name - Name of method to execute + * args - Parameters to the method + * Types - + * flags - single step/no single step + * + * RETURN: None + * + * DESCRIPTION: Execute a control method. Name is relative to the current + * scope. + * + ******************************************************************************/ + +void +acpi_db_execute(char *name, char **args, acpi_object_type * types, u32 flags) +{ + acpi_status status; + struct acpi_buffer return_obj; + char *name_string; + +#ifdef ACPI_DEBUG_OUTPUT + u32 previous_allocations; + u32 allocations; + + /* Memory allocation tracking */ + + previous_allocations = acpi_db_get_outstanding_allocations(); +#endif + + if (*name == '*') { + (void)acpi_walk_namespace(ACPI_TYPE_METHOD, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, + acpi_db_execution_walk, NULL, NULL, + NULL); + return; + } else { + name_string = ACPI_ALLOCATE(strlen(name) + 1); + if (!name_string) { + return; + } + + memset(&acpi_gbl_db_method_info, 0, + sizeof(struct acpi_db_method_info)); + + strcpy(name_string, name); + acpi_ut_strupr(name_string); + acpi_gbl_db_method_info.name = name_string; + acpi_gbl_db_method_info.args = args; + acpi_gbl_db_method_info.types = types; + acpi_gbl_db_method_info.flags = flags; + + return_obj.pointer = NULL; + return_obj.length = ACPI_ALLOCATE_BUFFER; + + status = acpi_db_execute_setup(&acpi_gbl_db_method_info); + if (ACPI_FAILURE(status)) { + ACPI_FREE(name_string); + return; + } + + /* Get the NS node, determines existence also */ + + status = acpi_get_handle(NULL, acpi_gbl_db_method_info.pathname, + &acpi_gbl_db_method_info.method); + if (ACPI_SUCCESS(status)) { + status = + acpi_db_execute_method(&acpi_gbl_db_method_info, + &return_obj); + } + ACPI_FREE(name_string); + } + + /* + * Allow any handlers in separate threads to complete. + * (Such as Notify handlers invoked from AML executed above). + */ + acpi_os_sleep((u64)10); + +#ifdef ACPI_DEBUG_OUTPUT + + /* Memory allocation tracking */ + + allocations = + acpi_db_get_outstanding_allocations() - previous_allocations; + + acpi_db_set_output_destination(ACPI_DB_DUPLICATE_OUTPUT); + + if (allocations > 0) { + acpi_os_printf + ("0x%X Outstanding allocations after evaluation of %s\n", + allocations, acpi_gbl_db_method_info.pathname); + } +#endif + + if (ACPI_FAILURE(status)) { + acpi_os_printf("Evaluation of %s failed with status %s\n", + acpi_gbl_db_method_info.pathname, + acpi_format_exception(status)); + } else { + /* Display a return object, if any */ + + if (return_obj.length) { + acpi_os_printf("Evaluation of %s returned object %p, " + "external buffer length %X\n", + acpi_gbl_db_method_info.pathname, + return_obj.pointer, + (u32)return_obj.length); + + acpi_db_dump_external_object(return_obj.pointer, 1); + + /* Dump a _PLD buffer if present */ + + if (ACPI_COMPARE_NAME + ((ACPI_CAST_PTR + (struct acpi_namespace_node, + acpi_gbl_db_method_info.method)->name.ascii), + METHOD_NAME__PLD)) { + acpi_db_dump_pld_buffer(return_obj.pointer); + } + } else { + acpi_os_printf + ("No object was returned from evaluation of %s\n", + acpi_gbl_db_method_info.pathname); + } + } + + acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_method_thread + * + * PARAMETERS: context - Execution info segment + * + * RETURN: None + * + * DESCRIPTION: Debugger execute thread. Waits for a command line, then + * simply dispatches it. + * + ******************************************************************************/ + +static void ACPI_SYSTEM_XFACE acpi_db_method_thread(void *context) +{ + acpi_status status; + struct acpi_db_method_info *info = context; + struct acpi_db_method_info local_info; + u32 i; + u8 allow; + struct acpi_buffer return_obj; + + /* + * acpi_gbl_db_method_info.Arguments will be passed as method arguments. + * Prevent acpi_gbl_db_method_info from being modified by multiple threads + * concurrently. + * + * Note: The arguments we are passing are used by the ASL test suite + * (aslts). Do not change them without updating the tests. + */ + (void)acpi_os_wait_semaphore(info->info_gate, 1, ACPI_WAIT_FOREVER); + + if (info->init_args) { + acpi_db_uint32_to_hex_string(info->num_created, + info->index_of_thread_str); + acpi_db_uint32_to_hex_string((u32)acpi_os_get_thread_id(), + info->id_of_thread_str); + } + + if (info->threads && (info->num_created < info->num_threads)) { + info->threads[info->num_created++] = acpi_os_get_thread_id(); + } + + local_info = *info; + local_info.args = local_info.arguments; + local_info.arguments[0] = local_info.num_threads_str; + local_info.arguments[1] = local_info.id_of_thread_str; + local_info.arguments[2] = local_info.index_of_thread_str; + local_info.arguments[3] = NULL; + + local_info.types = local_info.arg_types; + + (void)acpi_os_signal_semaphore(info->info_gate, 1); + + for (i = 0; i < info->num_loops; i++) { + status = acpi_db_execute_method(&local_info, &return_obj); + if (ACPI_FAILURE(status)) { + acpi_os_printf + ("%s During evaluation of %s at iteration %X\n", + acpi_format_exception(status), info->pathname, i); + if (status == AE_ABORT_METHOD) { + break; + } + } +#if 0 + if ((i % 100) == 0) { + acpi_os_printf("%u loops, Thread 0x%x\n", + i, acpi_os_get_thread_id()); + } + + if (return_obj.length) { + acpi_os_printf + ("Evaluation of %s returned object %p Buflen %X\n", + info->pathname, return_obj.pointer, + (u32)return_obj.length); + acpi_db_dump_external_object(return_obj.pointer, 1); + } +#endif + } + + /* Signal our completion */ + + allow = 0; + (void)acpi_os_wait_semaphore(info->thread_complete_gate, + 1, ACPI_WAIT_FOREVER); + info->num_completed++; + + if (info->num_completed == info->num_threads) { + + /* Do signal for main thread once only */ + allow = 1; + } + + (void)acpi_os_signal_semaphore(info->thread_complete_gate, 1); + + if (allow) { + status = acpi_os_signal_semaphore(info->main_thread_gate, 1); + if (ACPI_FAILURE(status)) { + acpi_os_printf + ("Could not signal debugger thread sync semaphore, %s\n", + acpi_format_exception(status)); + } + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_create_execution_threads + * + * PARAMETERS: num_threads_arg - Number of threads to create + * num_loops_arg - Loop count for the thread(s) + * method_name_arg - Control method to execute + * + * RETURN: None + * + * DESCRIPTION: Create threads to execute method(s) + * + ******************************************************************************/ + +void +acpi_db_create_execution_threads(char *num_threads_arg, + char *num_loops_arg, char *method_name_arg) +{ + acpi_status status; + u32 num_threads; + u32 num_loops; + u32 i; + u32 size; + acpi_mutex main_thread_gate; + acpi_mutex thread_complete_gate; + acpi_mutex info_gate; + + /* Get the arguments */ + + num_threads = strtoul(num_threads_arg, NULL, 0); + num_loops = strtoul(num_loops_arg, NULL, 0); + + if (!num_threads || !num_loops) { + acpi_os_printf("Bad argument: Threads %X, Loops %X\n", + num_threads, num_loops); + return; + } + + /* + * Create the semaphore for synchronization of + * the created threads with the main thread. + */ + status = acpi_os_create_semaphore(1, 0, &main_thread_gate); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not create semaphore for " + "synchronization with the main thread, %s\n", + acpi_format_exception(status)); + return; + } + + /* + * Create the semaphore for synchronization + * between the created threads. + */ + status = acpi_os_create_semaphore(1, 1, &thread_complete_gate); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not create semaphore for " + "synchronization between the created threads, %s\n", + acpi_format_exception(status)); + + (void)acpi_os_delete_semaphore(main_thread_gate); + return; + } + + status = acpi_os_create_semaphore(1, 1, &info_gate); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not create semaphore for " + "synchronization of AcpiGbl_DbMethodInfo, %s\n", + acpi_format_exception(status)); + + (void)acpi_os_delete_semaphore(thread_complete_gate); + (void)acpi_os_delete_semaphore(main_thread_gate); + return; + } + + memset(&acpi_gbl_db_method_info, 0, sizeof(struct acpi_db_method_info)); + + /* Array to store IDs of threads */ + + acpi_gbl_db_method_info.num_threads = num_threads; + size = sizeof(acpi_thread_id) * acpi_gbl_db_method_info.num_threads; + + acpi_gbl_db_method_info.threads = acpi_os_allocate(size); + if (acpi_gbl_db_method_info.threads == NULL) { + acpi_os_printf("No memory for thread IDs array\n"); + (void)acpi_os_delete_semaphore(main_thread_gate); + (void)acpi_os_delete_semaphore(thread_complete_gate); + (void)acpi_os_delete_semaphore(info_gate); + return; + } + memset(acpi_gbl_db_method_info.threads, 0, size); + + /* Setup the context to be passed to each thread */ + + acpi_gbl_db_method_info.name = method_name_arg; + acpi_gbl_db_method_info.flags = 0; + acpi_gbl_db_method_info.num_loops = num_loops; + acpi_gbl_db_method_info.main_thread_gate = main_thread_gate; + acpi_gbl_db_method_info.thread_complete_gate = thread_complete_gate; + acpi_gbl_db_method_info.info_gate = info_gate; + + /* Init arguments to be passed to method */ + + acpi_gbl_db_method_info.init_args = 1; + acpi_gbl_db_method_info.args = acpi_gbl_db_method_info.arguments; + acpi_gbl_db_method_info.arguments[0] = + acpi_gbl_db_method_info.num_threads_str; + acpi_gbl_db_method_info.arguments[1] = + acpi_gbl_db_method_info.id_of_thread_str; + acpi_gbl_db_method_info.arguments[2] = + acpi_gbl_db_method_info.index_of_thread_str; + acpi_gbl_db_method_info.arguments[3] = NULL; + + acpi_gbl_db_method_info.types = acpi_gbl_db_method_info.arg_types; + acpi_gbl_db_method_info.arg_types[0] = ACPI_TYPE_INTEGER; + acpi_gbl_db_method_info.arg_types[1] = ACPI_TYPE_INTEGER; + acpi_gbl_db_method_info.arg_types[2] = ACPI_TYPE_INTEGER; + + acpi_db_uint32_to_hex_string(num_threads, + acpi_gbl_db_method_info.num_threads_str); + + status = acpi_db_execute_setup(&acpi_gbl_db_method_info); + if (ACPI_FAILURE(status)) { + goto cleanup_and_exit; + } + + /* Get the NS node, determines existence also */ + + status = acpi_get_handle(NULL, acpi_gbl_db_method_info.pathname, + &acpi_gbl_db_method_info.method); + if (ACPI_FAILURE(status)) { + acpi_os_printf("%s Could not get handle for %s\n", + acpi_format_exception(status), + acpi_gbl_db_method_info.pathname); + goto cleanup_and_exit; + } + + /* Create the threads */ + + acpi_os_printf("Creating %X threads to execute %X times each\n", + num_threads, num_loops); + + for (i = 0; i < (num_threads); i++) { + status = + acpi_os_execute(OSL_DEBUGGER_THREAD, acpi_db_method_thread, + &acpi_gbl_db_method_info); + if (ACPI_FAILURE(status)) { + break; + } + } + + /* Wait for all threads to complete */ + + (void)acpi_os_wait_semaphore(main_thread_gate, 1, ACPI_WAIT_FOREVER); + + acpi_db_set_output_destination(ACPI_DB_DUPLICATE_OUTPUT); + acpi_os_printf("All threads (%X) have completed\n", num_threads); + acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT); + +cleanup_and_exit: + + /* Cleanup and exit */ + + (void)acpi_os_delete_semaphore(main_thread_gate); + (void)acpi_os_delete_semaphore(thread_complete_gate); + (void)acpi_os_delete_semaphore(info_gate); + + acpi_os_free(acpi_gbl_db_method_info.threads); + acpi_gbl_db_method_info.threads = NULL; +} diff --git a/drivers/acpi/acpica/dbfileio.c b/drivers/acpi/acpica/dbfileio.c new file mode 100644 index 000000000000..d0e6b20ce82a --- /dev/null +++ b/drivers/acpi/acpica/dbfileio.c @@ -0,0 +1,256 @@ +/******************************************************************************* + * + * Module Name: dbfileio - Debugger file I/O commands. These can't usually + * be used when running the debugger in Ring 0 (Kernel mode) + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acdebug.h" +#include "actables.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbfileio") + +#ifdef ACPI_DEBUGGER +/******************************************************************************* + * + * FUNCTION: acpi_db_close_debug_file + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: If open, close the current debug output file + * + ******************************************************************************/ +void acpi_db_close_debug_file(void) +{ + +#ifdef ACPI_APPLICATION + + if (acpi_gbl_debug_file) { + fclose(acpi_gbl_debug_file); + acpi_gbl_debug_file = NULL; + acpi_gbl_db_output_to_file = FALSE; + acpi_os_printf("Debug output file %s closed\n", + acpi_gbl_db_debug_filename); + } +#endif +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_open_debug_file + * + * PARAMETERS: name - Filename to open + * + * RETURN: None + * + * DESCRIPTION: Open a file where debug output will be directed. + * + ******************************************************************************/ + +void acpi_db_open_debug_file(char *name) +{ + +#ifdef ACPI_APPLICATION + + acpi_db_close_debug_file(); + acpi_gbl_debug_file = fopen(name, "w+"); + if (!acpi_gbl_debug_file) { + acpi_os_printf("Could not open debug file %s\n", name); + return; + } + + acpi_os_printf("Debug output file %s opened\n", name); + strncpy(acpi_gbl_db_debug_filename, name, + sizeof(acpi_gbl_db_debug_filename)); + acpi_gbl_db_output_to_file = TRUE; + +#endif +} +#endif + +#ifdef ACPI_APPLICATION +#include "acapps.h" + +/******************************************************************************* + * + * FUNCTION: ae_local_load_table + * + * PARAMETERS: table - pointer to a buffer containing the entire + * table to be loaded + * + * RETURN: Status + * + * DESCRIPTION: This function is called to load a table from the caller's + * buffer. The buffer must contain an entire ACPI Table including + * a valid header. The header fields will be verified, and if it + * is determined that the table is invalid, the call will fail. + * + ******************************************************************************/ + +static acpi_status ae_local_load_table(struct acpi_table_header *table) +{ + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE(ae_local_load_table); + +#if 0 +/* struct acpi_table_desc table_info; */ + + if (!table) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + table_info.pointer = table; + status = acpi_tb_recognize_table(&table_info, ACPI_TABLE_ALL); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Install the new table into the local data structures */ + + status = acpi_tb_init_table_descriptor(&table_info); + if (ACPI_FAILURE(status)) { + if (status == AE_ALREADY_EXISTS) { + + /* Table already exists, no error */ + + status = AE_OK; + } + + /* Free table allocated by acpi_tb_get_table */ + + acpi_tb_delete_single_table(&table_info); + return_ACPI_STATUS(status); + } +#if (!defined (ACPI_NO_METHOD_EXECUTION) && !defined (ACPI_CONSTANT_EVAL_ONLY)) + + status = + acpi_ns_load_table(table_info.installed_desc, acpi_gbl_root_node); + if (ACPI_FAILURE(status)) { + + /* Uninstall table and free the buffer */ + + acpi_tb_delete_tables_by_type(ACPI_TABLE_ID_DSDT); + return_ACPI_STATUS(status); + } +#endif +#endif + + return_ACPI_STATUS(status); +} +#endif + +/******************************************************************************* + * + * FUNCTION: acpi_db_get_table_from_file + * + * PARAMETERS: filename - File where table is located + * return_table - Where a pointer to the table is returned + * + * RETURN: Status + * + * DESCRIPTION: Load an ACPI table from a file + * + ******************************************************************************/ + +acpi_status +acpi_db_get_table_from_file(char *filename, + struct acpi_table_header **return_table, + u8 must_be_aml_file) +{ +#ifdef ACPI_APPLICATION + acpi_status status; + struct acpi_table_header *table; + u8 is_aml_table = TRUE; + + status = acpi_ut_read_table_from_file(filename, &table); + if (ACPI_FAILURE(status)) { + return (status); + } + + if (must_be_aml_file) { + is_aml_table = acpi_ut_is_aml_table(table); + if (!is_aml_table) { + ACPI_EXCEPTION((AE_INFO, AE_OK, + "Input for -e is not an AML table: " + "\"%4.4s\" (must be DSDT/SSDT)", + table->signature)); + return (AE_TYPE); + } + } + + if (is_aml_table) { + + /* Attempt to recognize and install the table */ + + status = ae_local_load_table(table); + if (ACPI_FAILURE(status)) { + if (status == AE_ALREADY_EXISTS) { + acpi_os_printf + ("Table %4.4s is already installed\n", + table->signature); + } else { + acpi_os_printf("Could not install table, %s\n", + acpi_format_exception(status)); + } + + return (status); + } + + acpi_tb_print_table_header(0, table); + + fprintf(stderr, + "Acpi table [%4.4s] successfully installed and loaded\n", + table->signature); + } + + acpi_gbl_acpi_hardware_present = FALSE; + if (return_table) { + *return_table = table; + } + +#endif /* ACPI_APPLICATION */ + return (AE_OK); +} diff --git a/drivers/acpi/acpica/dbhistry.c b/drivers/acpi/acpica/dbhistry.c new file mode 100644 index 000000000000..9c66a9eadd38 --- /dev/null +++ b/drivers/acpi/acpica/dbhistry.c @@ -0,0 +1,239 @@ +/****************************************************************************** + * + * Module Name: dbhistry - debugger HISTORY command + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acdebug.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbhistry") + +#define HI_NO_HISTORY 0 +#define HI_RECORD_HISTORY 1 +#define HISTORY_SIZE 40 +typedef struct history_info { + char *command; + u32 cmd_num; + +} HISTORY_INFO; + +static HISTORY_INFO acpi_gbl_history_buffer[HISTORY_SIZE]; +static u16 acpi_gbl_lo_history = 0; +static u16 acpi_gbl_num_history = 0; +static u16 acpi_gbl_next_history_index = 0; +u32 acpi_gbl_next_cmd_num = 1; + +/******************************************************************************* + * + * FUNCTION: acpi_db_add_to_history + * + * PARAMETERS: command_line - Command to add + * + * RETURN: None + * + * DESCRIPTION: Add a command line to the history buffer. + * + ******************************************************************************/ + +void acpi_db_add_to_history(char *command_line) +{ + u16 cmd_len; + u16 buffer_len; + + /* Put command into the next available slot */ + + cmd_len = (u16)strlen(command_line); + if (!cmd_len) { + return; + } + + if (acpi_gbl_history_buffer[acpi_gbl_next_history_index].command != + NULL) { + buffer_len = + (u16) + strlen(acpi_gbl_history_buffer[acpi_gbl_next_history_index]. + command); + + if (cmd_len > buffer_len) { + acpi_os_free(acpi_gbl_history_buffer + [acpi_gbl_next_history_index].command); + acpi_gbl_history_buffer[acpi_gbl_next_history_index]. + command = acpi_os_allocate(cmd_len + 1); + } + } else { + acpi_gbl_history_buffer[acpi_gbl_next_history_index].command = + acpi_os_allocate(cmd_len + 1); + } + + strcpy(acpi_gbl_history_buffer[acpi_gbl_next_history_index].command, + command_line); + + acpi_gbl_history_buffer[acpi_gbl_next_history_index].cmd_num = + acpi_gbl_next_cmd_num; + + /* Adjust indexes */ + + if ((acpi_gbl_num_history == HISTORY_SIZE) && + (acpi_gbl_next_history_index == acpi_gbl_lo_history)) { + acpi_gbl_lo_history++; + if (acpi_gbl_lo_history >= HISTORY_SIZE) { + acpi_gbl_lo_history = 0; + } + } + + acpi_gbl_next_history_index++; + if (acpi_gbl_next_history_index >= HISTORY_SIZE) { + acpi_gbl_next_history_index = 0; + } + + acpi_gbl_next_cmd_num++; + if (acpi_gbl_num_history < HISTORY_SIZE) { + acpi_gbl_num_history++; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_history + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Display the contents of the history buffer + * + ******************************************************************************/ + +void acpi_db_display_history(void) +{ + u32 i; + u16 history_index; + + history_index = acpi_gbl_lo_history; + + /* Dump entire history buffer */ + + for (i = 0; i < acpi_gbl_num_history; i++) { + if (acpi_gbl_history_buffer[history_index].command) { + acpi_os_printf("%3ld %s\n", + acpi_gbl_history_buffer[history_index]. + cmd_num, + acpi_gbl_history_buffer[history_index]. + command); + } + + history_index++; + if (history_index >= HISTORY_SIZE) { + history_index = 0; + } + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_get_from_history + * + * PARAMETERS: command_num_arg - String containing the number of the + * command to be retrieved + * + * RETURN: Pointer to the retrieved command. Null on error. + * + * DESCRIPTION: Get a command from the history buffer + * + ******************************************************************************/ + +char *acpi_db_get_from_history(char *command_num_arg) +{ + u32 cmd_num; + + if (command_num_arg == NULL) { + cmd_num = acpi_gbl_next_cmd_num - 1; + } + + else { + cmd_num = strtoul(command_num_arg, NULL, 0); + } + + return (acpi_db_get_history_by_index(cmd_num)); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_get_history_by_index + * + * PARAMETERS: cmd_num - Index of the desired history entry. + * Values are 0...(acpi_gbl_next_cmd_num - 1) + * + * RETURN: Pointer to the retrieved command. Null on error. + * + * DESCRIPTION: Get a command from the history buffer + * + ******************************************************************************/ + +char *acpi_db_get_history_by_index(u32 cmd_num) +{ + u32 i; + u16 history_index; + + /* Search history buffer */ + + history_index = acpi_gbl_lo_history; + for (i = 0; i < acpi_gbl_num_history; i++) { + if (acpi_gbl_history_buffer[history_index].cmd_num == cmd_num) { + + /* Found the command, return it */ + + return (acpi_gbl_history_buffer[history_index].command); + } + + /* History buffer is circular */ + + history_index++; + if (history_index >= HISTORY_SIZE) { + history_index = 0; + } + } + + acpi_os_printf("Invalid history number: %u\n", history_index); + return (NULL); +} diff --git a/drivers/acpi/acpica/dbinput.c b/drivers/acpi/acpica/dbinput.c new file mode 100644 index 000000000000..7f1b6ec62668 --- /dev/null +++ b/drivers/acpi/acpica/dbinput.c @@ -0,0 +1,1274 @@ +/******************************************************************************* + * + * Module Name: dbinput - user front-end to the AML debugger + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acdebug.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbinput") + +/* Local prototypes */ +static u32 acpi_db_get_line(char *input_buffer); + +static u32 acpi_db_match_command(char *user_command); + +static void acpi_db_single_thread(void); + +static void acpi_db_display_command_info(char *command, u8 display_all); + +static void acpi_db_display_help(char *command); + +static u8 +acpi_db_match_command_help(char *command, + const struct acpi_db_command_help *help); + +/* + * Top-level debugger commands. + * + * This list of commands must match the string table below it + */ +enum acpi_ex_debugger_commands { + CMD_NOT_FOUND = 0, + CMD_NULL, + CMD_ALLOCATIONS, + CMD_ARGS, + CMD_ARGUMENTS, + CMD_BREAKPOINT, + CMD_BUSINFO, + CMD_CALL, + CMD_DEBUG, + CMD_DISASSEMBLE, + CMD_DISASM, + CMD_DUMP, + CMD_EVALUATE, + CMD_EXECUTE, + CMD_EXIT, + CMD_FIND, + CMD_GO, + CMD_HANDLERS, + CMD_HELP, + CMD_HELP2, + CMD_HISTORY, + CMD_HISTORY_EXE, + CMD_HISTORY_LAST, + CMD_INFORMATION, + CMD_INTEGRITY, + CMD_INTO, + CMD_LEVEL, + CMD_LIST, + CMD_LOCALS, + CMD_LOCKS, + CMD_METHODS, + CMD_NAMESPACE, + CMD_NOTIFY, + CMD_OBJECTS, + CMD_OSI, + CMD_OWNER, + CMD_PATHS, + CMD_PREDEFINED, + CMD_PREFIX, + CMD_QUIT, + CMD_REFERENCES, + CMD_RESOURCES, + CMD_RESULTS, + CMD_SET, + CMD_STATS, + CMD_STOP, + CMD_TABLES, + CMD_TEMPLATE, + CMD_TRACE, + CMD_TREE, + CMD_TYPE, +#ifdef ACPI_APPLICATION + CMD_ENABLEACPI, + CMD_EVENT, + CMD_GPE, + CMD_GPES, + CMD_SCI, + CMD_SLEEP, + + CMD_CLOSE, + CMD_LOAD, + CMD_OPEN, + CMD_UNLOAD, + + CMD_TERMINATE, + CMD_THREADS, + + CMD_TEST, +#endif +}; + +#define CMD_FIRST_VALID 2 + +/* Second parameter is the required argument count */ + +static const struct acpi_db_command_info acpi_gbl_db_commands[] = { + {"<NOT FOUND>", 0}, + {"<NULL>", 0}, + {"ALLOCATIONS", 0}, + {"ARGS", 0}, + {"ARGUMENTS", 0}, + {"BREAKPOINT", 1}, + {"BUSINFO", 0}, + {"CALL", 0}, + {"DEBUG", 1}, + {"DISASSEMBLE", 1}, + {"DISASM", 1}, + {"DUMP", 1}, + {"EVALUATE", 1}, + {"EXECUTE", 1}, + {"EXIT", 0}, + {"FIND", 1}, + {"GO", 0}, + {"HANDLERS", 0}, + {"HELP", 0}, + {"?", 0}, + {"HISTORY", 0}, + {"!", 1}, + {"!!", 0}, + {"INFORMATION", 0}, + {"INTEGRITY", 0}, + {"INTO", 0}, + {"LEVEL", 0}, + {"LIST", 0}, + {"LOCALS", 0}, + {"LOCKS", 0}, + {"METHODS", 0}, + {"NAMESPACE", 0}, + {"NOTIFY", 2}, + {"OBJECTS", 0}, + {"OSI", 0}, + {"OWNER", 1}, + {"PATHS", 0}, + {"PREDEFINED", 0}, + {"PREFIX", 0}, + {"QUIT", 0}, + {"REFERENCES", 1}, + {"RESOURCES", 0}, + {"RESULTS", 0}, + {"SET", 3}, + {"STATS", 1}, + {"STOP", 0}, + {"TABLES", 0}, + {"TEMPLATE", 1}, + {"TRACE", 1}, + {"TREE", 0}, + {"TYPE", 1}, +#ifdef ACPI_APPLICATION + {"ENABLEACPI", 0}, + {"EVENT", 1}, + {"GPE", 1}, + {"GPES", 0}, + {"SCI", 0}, + {"SLEEP", 0}, + + {"CLOSE", 0}, + {"LOAD", 1}, + {"OPEN", 1}, + {"UNLOAD", 1}, + + {"TERMINATE", 0}, + {"THREADS", 3}, + + {"TEST", 1}, +#endif + {NULL, 0} +}; + +/* + * Help for all debugger commands. First argument is the number of lines + * of help to output for the command. + */ +static const struct acpi_db_command_help acpi_gbl_db_command_help[] = { + {0, "\nGeneral-Purpose Commands:", "\n"}, + {1, " Allocations", "Display list of current memory allocations\n"}, + {2, " Dump <Address>|<Namepath>", "\n"}, + {0, " [Byte|Word|Dword|Qword]", + "Display ACPI objects or memory\n"}, + {1, " Handlers", "Info about global handlers\n"}, + {1, " Help [Command]", "This help screen or individual command\n"}, + {1, " History", "Display command history buffer\n"}, + {1, " Level <DebugLevel>] [console]", + "Get/Set debug level for file or console\n"}, + {1, " Locks", "Current status of internal mutexes\n"}, + {1, " Osi [Install|Remove <name>]", + "Display or modify global _OSI list\n"}, + {1, " Quit or Exit", "Exit this command\n"}, + {8, " Stats <SubCommand>", + "Display namespace and memory statistics\n"}, + {1, " Allocations", "Display list of current memory allocations\n"}, + {1, " Memory", "Dump internal memory lists\n"}, + {1, " Misc", "Namespace search and mutex stats\n"}, + {1, " Objects", "Summary of namespace objects\n"}, + {1, " Sizes", "Sizes for each of the internal objects\n"}, + {1, " Stack", "Display CPU stack usage\n"}, + {1, " Tables", "Info about current ACPI table(s)\n"}, + {1, " Tables", "Display info about loaded ACPI tables\n"}, + {1, " ! <CommandNumber>", "Execute command from history buffer\n"}, + {1, " !!", "Execute last command again\n"}, + + {0, "\nNamespace Access Commands:", "\n"}, + {1, " Businfo", "Display system bus info\n"}, + {1, " Disassemble <Method>", "Disassemble a control method\n"}, + {1, " Find <AcpiName> (? is wildcard)", + "Find ACPI name(s) with wildcards\n"}, + {1, " Integrity", "Validate namespace integrity\n"}, + {1, " Methods", "Display list of loaded control methods\n"}, + {1, " Namespace [Object] [Depth]", + "Display loaded namespace tree/subtree\n"}, + {1, " Notify <Object> <Value>", "Send a notification on Object\n"}, + {1, " Objects [ObjectType]", + "Display summary of all objects or just given type\n"}, + {1, " Owner <OwnerId> [Depth]", + "Display loaded namespace by object owner\n"}, + {1, " Paths", "Display full pathnames of namespace objects\n"}, + {1, " Predefined", "Check all predefined names\n"}, + {1, " Prefix [<Namepath>]", "Set or Get current execution prefix\n"}, + {1, " References <Addr>", "Find all references to object at addr\n"}, + {1, " Resources [DeviceName]", + "Display Device resources (no arg = all devices)\n"}, + {1, " Set N <NamedObject> <Value>", "Set value for named integer\n"}, + {1, " Template <Object>", "Format/dump a Buffer/ResourceTemplate\n"}, + {1, " Type <Object>", "Display object type\n"}, + + {0, "\nControl Method Execution Commands:", "\n"}, + {1, " Arguments (or Args)", "Display method arguments\n"}, + {1, " Breakpoint <AmlOffset>", "Set an AML execution breakpoint\n"}, + {1, " Call", "Run to next control method invocation\n"}, + {1, " Debug <Namepath> [Arguments]", "Single Step a control method\n"}, + {6, " Evaluate", "Synonym for Execute\n"}, + {5, " Execute <Namepath> [Arguments]", "Execute control method\n"}, + {1, " Hex Integer", "Integer method argument\n"}, + {1, " \"Ascii String\"", "String method argument\n"}, + {1, " (Hex Byte List)", "Buffer method argument\n"}, + {1, " [Package Element List]", "Package method argument\n"}, + {1, " Go", "Allow method to run to completion\n"}, + {1, " Information", "Display info about the current method\n"}, + {1, " Into", "Step into (not over) a method call\n"}, + {1, " List [# of Aml Opcodes]", "Display method ASL statements\n"}, + {1, " Locals", "Display method local variables\n"}, + {1, " Results", "Display method result stack\n"}, + {1, " Set <A|L> <#> <Value>", "Set method data (Arguments/Locals)\n"}, + {1, " Stop", "Terminate control method\n"}, + {5, " Trace <State> [<Namepath>] [Once]", + "Trace control method execution\n"}, + {1, " Enable", "Enable all messages\n"}, + {1, " Disable", "Disable tracing\n"}, + {1, " Method", "Enable method execution messages\n"}, + {1, " Opcode", "Enable opcode execution messages\n"}, + {1, " Tree", "Display control method calling tree\n"}, + {1, " <Enter>", "Single step next AML opcode (over calls)\n"}, + +#ifdef ACPI_APPLICATION + {0, "\nHardware Simulation Commands:", "\n"}, + {1, " EnableAcpi", "Enable ACPI (hardware) mode\n"}, + {1, " Event <F|G> <Value>", "Generate AcpiEvent (Fixed/GPE)\n"}, + {1, " Gpe <GpeNum> [GpeBlockDevice]", "Simulate a GPE\n"}, + {1, " Gpes", "Display info on all GPE devices\n"}, + {1, " Sci", "Generate an SCI\n"}, + {1, " Sleep [SleepState]", "Simulate sleep/wake sequence(s) (0-5)\n"}, + + {0, "\nFile I/O Commands:", "\n"}, + {1, " Close", "Close debug output file\n"}, + {1, " Load <Input Filename>", "Load ACPI table from a file\n"}, + {1, " Open <Output Filename>", "Open a file for debug output\n"}, + {1, " Unload <Namepath>", + "Unload an ACPI table via namespace object\n"}, + + {0, "\nUser Space Commands:", "\n"}, + {1, " Terminate", "Delete namespace and all internal objects\n"}, + {1, " Thread <Threads><Loops><NamePath>", + "Spawn threads to execute method(s)\n"}, + + {0, "\nDebug Test Commands:", "\n"}, + {3, " Test <TestName>", "Invoke a debug test\n"}, + {1, " Objects", "Read/write/compare all namespace data objects\n"}, + {1, " Predefined", + "Execute all ACPI predefined names (_STA, etc.)\n"}, +#endif + {0, NULL, NULL} +}; + +/******************************************************************************* + * + * FUNCTION: acpi_db_match_command_help + * + * PARAMETERS: command - Command string to match + * help - Help table entry to attempt match + * + * RETURN: TRUE if command matched, FALSE otherwise + * + * DESCRIPTION: Attempt to match a command in the help table in order to + * print help information for a single command. + * + ******************************************************************************/ + +static u8 +acpi_db_match_command_help(char *command, + const struct acpi_db_command_help *help) +{ + char *invocation = help->invocation; + u32 line_count; + + /* Valid commands in the help table begin with a couple of spaces */ + + if (*invocation != ' ') { + return (FALSE); + } + + while (*invocation == ' ') { + invocation++; + } + + /* Match command name (full command or substring) */ + + while ((*command) && (*invocation) && (*invocation != ' ')) { + if (tolower((int)*command) != tolower((int)*invocation)) { + return (FALSE); + } + + invocation++; + command++; + } + + /* Print the appropriate number of help lines */ + + line_count = help->line_count; + while (line_count) { + acpi_os_printf("%-38s : %s", help->invocation, + help->description); + help++; + line_count--; + } + + return (TRUE); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_command_info + * + * PARAMETERS: command - Command string to match + * display_all - Display all matching commands, or just + * the first one (substring match) + * + * RETURN: None + * + * DESCRIPTION: Display help information for a Debugger command. + * + ******************************************************************************/ + +static void acpi_db_display_command_info(char *command, u8 display_all) +{ + const struct acpi_db_command_help *next; + u8 matched; + + next = acpi_gbl_db_command_help; + while (next->invocation) { + matched = acpi_db_match_command_help(command, next); + if (!display_all && matched) { + return; + } + + next++; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_help + * + * PARAMETERS: command - Optional command string to display help. + * if not specified, all debugger command + * help strings are displayed + * + * RETURN: None + * + * DESCRIPTION: Display help for a single debugger command, or all of them. + * + ******************************************************************************/ + +static void acpi_db_display_help(char *command) +{ + const struct acpi_db_command_help *next = acpi_gbl_db_command_help; + + if (!command) { + + /* No argument to help, display help for all commands */ + + while (next->invocation) { + acpi_os_printf("%-38s%s", next->invocation, + next->description); + next++; + } + } else { + /* Display help for all commands that match the subtring */ + + acpi_db_display_command_info(command, TRUE); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_get_next_token + * + * PARAMETERS: string - Command buffer + * next - Return value, end of next token + * + * RETURN: Pointer to the start of the next token. + * + * DESCRIPTION: Command line parsing. Get the next token on the command line + * + ******************************************************************************/ + +char *acpi_db_get_next_token(char *string, + char **next, acpi_object_type * return_type) +{ + char *start; + u32 depth; + acpi_object_type type = ACPI_TYPE_INTEGER; + + /* At end of buffer? */ + + if (!string || !(*string)) { + return (NULL); + } + + /* Remove any spaces at the beginning */ + + if (*string == ' ') { + while (*string && (*string == ' ')) { + string++; + } + + if (!(*string)) { + return (NULL); + } + } + + switch (*string) { + case '"': + + /* This is a quoted string, scan until closing quote */ + + string++; + start = string; + type = ACPI_TYPE_STRING; + + /* Find end of string */ + + while (*string && (*string != '"')) { + string++; + } + break; + + case '(': + + /* This is the start of a buffer, scan until closing paren */ + + string++; + start = string; + type = ACPI_TYPE_BUFFER; + + /* Find end of buffer */ + + while (*string && (*string != ')')) { + string++; + } + break; + + case '[': + + /* This is the start of a package, scan until closing bracket */ + + string++; + depth = 1; + start = string; + type = ACPI_TYPE_PACKAGE; + + /* Find end of package (closing bracket) */ + + while (*string) { + + /* Handle String package elements */ + + if (*string == '"') { + /* Find end of string */ + + string++; + while (*string && (*string != '"')) { + string++; + } + if (!(*string)) { + break; + } + } else if (*string == '[') { + depth++; /* A nested package declaration */ + } else if (*string == ']') { + depth--; + if (depth == 0) { /* Found final package closing bracket */ + break; + } + } + + string++; + } + break; + + default: + + start = string; + + /* Find end of token */ + + while (*string && (*string != ' ')) { + string++; + } + break; + } + + if (!(*string)) { + *next = NULL; + } else { + *string = 0; + *next = string + 1; + } + + *return_type = type; + return (start); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_get_line + * + * PARAMETERS: input_buffer - Command line buffer + * + * RETURN: Count of arguments to the command + * + * DESCRIPTION: Get the next command line from the user. Gets entire line + * up to the next newline + * + ******************************************************************************/ + +static u32 acpi_db_get_line(char *input_buffer) +{ + u32 i; + u32 count; + char *next; + char *this; + + if (acpi_ut_safe_strcpy + (acpi_gbl_db_parsed_buf, sizeof(acpi_gbl_db_parsed_buf), + input_buffer)) { + acpi_os_printf + ("Buffer overflow while parsing input line (max %u characters)\n", + sizeof(acpi_gbl_db_parsed_buf)); + return (0); + } + + this = acpi_gbl_db_parsed_buf; + for (i = 0; i < ACPI_DEBUGGER_MAX_ARGS; i++) { + acpi_gbl_db_args[i] = acpi_db_get_next_token(this, &next, + &acpi_gbl_db_arg_types + [i]); + if (!acpi_gbl_db_args[i]) { + break; + } + + this = next; + } + + /* Uppercase the actual command */ + + if (acpi_gbl_db_args[0]) { + acpi_ut_strupr(acpi_gbl_db_args[0]); + } + + count = i; + if (count) { + count--; /* Number of args only */ + } + + return (count); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_match_command + * + * PARAMETERS: user_command - User command line + * + * RETURN: Index into command array, -1 if not found + * + * DESCRIPTION: Search command array for a command match + * + ******************************************************************************/ + +static u32 acpi_db_match_command(char *user_command) +{ + u32 i; + + if (!user_command || user_command[0] == 0) { + return (CMD_NULL); + } + + for (i = CMD_FIRST_VALID; acpi_gbl_db_commands[i].name; i++) { + if (strstr(acpi_gbl_db_commands[i].name, user_command) == + acpi_gbl_db_commands[i].name) { + return (i); + } + } + + /* Command not recognized */ + + return (CMD_NOT_FOUND); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_command_dispatch + * + * PARAMETERS: input_buffer - Command line buffer + * walk_state - Current walk + * op - Current (executing) parse op + * + * RETURN: Status + * + * DESCRIPTION: Command dispatcher. + * + ******************************************************************************/ + +acpi_status +acpi_db_command_dispatch(char *input_buffer, + struct acpi_walk_state * walk_state, + union acpi_parse_object * op) +{ + u32 temp; + u32 command_index; + u32 param_count; + char *command_line; + acpi_status status = AE_CTRL_TRUE; + + /* If acpi_terminate has been called, terminate this thread */ + + if (acpi_gbl_db_terminate_threads) { + return (AE_CTRL_TERMINATE); + } + + /* Find command and add to the history buffer */ + + param_count = acpi_db_get_line(input_buffer); + command_index = acpi_db_match_command(acpi_gbl_db_args[0]); + temp = 0; + + /* + * We don't want to add the !! command to the history buffer. It + * would cause an infinite loop because it would always be the + * previous command. + */ + if (command_index != CMD_HISTORY_LAST) { + acpi_db_add_to_history(input_buffer); + } + + /* Verify that we have the minimum number of params */ + + if (param_count < acpi_gbl_db_commands[command_index].min_args) { + acpi_os_printf + ("%u parameters entered, [%s] requires %u parameters\n", + param_count, acpi_gbl_db_commands[command_index].name, + acpi_gbl_db_commands[command_index].min_args); + + acpi_db_display_command_info(acpi_gbl_db_commands + [command_index].name, FALSE); + return (AE_CTRL_TRUE); + } + + /* Decode and dispatch the command */ + + switch (command_index) { + case CMD_NULL: + + if (op) { + return (AE_OK); + } + break; + + case CMD_ALLOCATIONS: + +#ifdef ACPI_DBG_TRACK_ALLOCATIONS + acpi_ut_dump_allocations((u32)-1, NULL); +#endif + break; + + case CMD_ARGS: + case CMD_ARGUMENTS: + + acpi_db_display_arguments(); + break; + + case CMD_BREAKPOINT: + + acpi_db_set_method_breakpoint(acpi_gbl_db_args[1], walk_state, + op); + break; + + case CMD_BUSINFO: + + acpi_db_get_bus_info(); + break; + + case CMD_CALL: + + acpi_db_set_method_call_breakpoint(op); + status = AE_OK; + break; + + case CMD_DEBUG: + + acpi_db_execute(acpi_gbl_db_args[1], + &acpi_gbl_db_args[2], &acpi_gbl_db_arg_types[2], + EX_SINGLE_STEP); + break; + + case CMD_DISASSEMBLE: + case CMD_DISASM: + + (void)acpi_db_disassemble_method(acpi_gbl_db_args[1]); + break; + + case CMD_DUMP: + + acpi_db_decode_and_display_object(acpi_gbl_db_args[1], + acpi_gbl_db_args[2]); + break; + + case CMD_EVALUATE: + case CMD_EXECUTE: + + acpi_db_execute(acpi_gbl_db_args[1], + &acpi_gbl_db_args[2], &acpi_gbl_db_arg_types[2], + EX_NO_SINGLE_STEP); + break; + + case CMD_FIND: + + status = acpi_db_find_name_in_namespace(acpi_gbl_db_args[1]); + break; + + case CMD_GO: + + acpi_gbl_cm_single_step = FALSE; + return (AE_OK); + + case CMD_HANDLERS: + + acpi_db_display_handlers(); + break; + + case CMD_HELP: + case CMD_HELP2: + + acpi_db_display_help(acpi_gbl_db_args[1]); + break; + + case CMD_HISTORY: + + acpi_db_display_history(); + break; + + case CMD_HISTORY_EXE: /* ! command */ + + command_line = acpi_db_get_from_history(acpi_gbl_db_args[1]); + if (!command_line) { + return (AE_CTRL_TRUE); + } + + status = acpi_db_command_dispatch(command_line, walk_state, op); + return (status); + + case CMD_HISTORY_LAST: /* !! command */ + + command_line = acpi_db_get_from_history(NULL); + if (!command_line) { + return (AE_CTRL_TRUE); + } + + status = acpi_db_command_dispatch(command_line, walk_state, op); + return (status); + + case CMD_INFORMATION: + + acpi_db_display_method_info(op); + break; + + case CMD_INTEGRITY: + + acpi_db_check_integrity(); + break; + + case CMD_INTO: + + if (op) { + acpi_gbl_cm_single_step = TRUE; + return (AE_OK); + } + break; + + case CMD_LEVEL: + + if (param_count == 0) { + acpi_os_printf + ("Current debug level for file output is: %8.8lX\n", + acpi_gbl_db_debug_level); + acpi_os_printf + ("Current debug level for console output is: %8.8lX\n", + acpi_gbl_db_console_debug_level); + } else if (param_count == 2) { + temp = acpi_gbl_db_console_debug_level; + acpi_gbl_db_console_debug_level = + strtoul(acpi_gbl_db_args[1], NULL, 16); + acpi_os_printf + ("Debug Level for console output was %8.8lX, now %8.8lX\n", + temp, acpi_gbl_db_console_debug_level); + } else { + temp = acpi_gbl_db_debug_level; + acpi_gbl_db_debug_level = + strtoul(acpi_gbl_db_args[1], NULL, 16); + acpi_os_printf + ("Debug Level for file output was %8.8lX, now %8.8lX\n", + temp, acpi_gbl_db_debug_level); + } + break; + + case CMD_LIST: + + acpi_db_disassemble_aml(acpi_gbl_db_args[1], op); + break; + + case CMD_LOCKS: + + acpi_db_display_locks(); + break; + + case CMD_LOCALS: + + acpi_db_display_locals(); + break; + + case CMD_METHODS: + + status = acpi_db_display_objects("METHOD", acpi_gbl_db_args[1]); + break; + + case CMD_NAMESPACE: + + acpi_db_dump_namespace(acpi_gbl_db_args[1], + acpi_gbl_db_args[2]); + break; + + case CMD_NOTIFY: + + temp = strtoul(acpi_gbl_db_args[2], NULL, 0); + acpi_db_send_notify(acpi_gbl_db_args[1], temp); + break; + + case CMD_OBJECTS: + + acpi_ut_strupr(acpi_gbl_db_args[1]); + status = + acpi_db_display_objects(acpi_gbl_db_args[1], + acpi_gbl_db_args[2]); + break; + + case CMD_OSI: + + acpi_db_display_interfaces(acpi_gbl_db_args[1], + acpi_gbl_db_args[2]); + break; + + case CMD_OWNER: + + acpi_db_dump_namespace_by_owner(acpi_gbl_db_args[1], + acpi_gbl_db_args[2]); + break; + + case CMD_PATHS: + + acpi_db_dump_namespace_paths(); + break; + + case CMD_PREFIX: + + acpi_db_set_scope(acpi_gbl_db_args[1]); + break; + + case CMD_REFERENCES: + + acpi_db_find_references(acpi_gbl_db_args[1]); + break; + + case CMD_RESOURCES: + + acpi_db_display_resources(acpi_gbl_db_args[1]); + break; + + case CMD_RESULTS: + + acpi_db_display_results(); + break; + + case CMD_SET: + + acpi_db_set_method_data(acpi_gbl_db_args[1], + acpi_gbl_db_args[2], + acpi_gbl_db_args[3]); + break; + + case CMD_STATS: + + status = acpi_db_display_statistics(acpi_gbl_db_args[1]); + break; + + case CMD_STOP: + + return (AE_NOT_IMPLEMENTED); + + case CMD_TABLES: + + acpi_db_display_table_info(acpi_gbl_db_args[1]); + break; + + case CMD_TEMPLATE: + + acpi_db_display_template(acpi_gbl_db_args[1]); + break; + + case CMD_TRACE: + + acpi_db_trace(acpi_gbl_db_args[1], acpi_gbl_db_args[2], + acpi_gbl_db_args[3]); + break; + + case CMD_TREE: + + acpi_db_display_calling_tree(); + break; + + case CMD_TYPE: + + acpi_db_display_object_type(acpi_gbl_db_args[1]); + break; + +#ifdef ACPI_APPLICATION + + /* Hardware simulation commands. */ + + case CMD_ENABLEACPI: +#if (!ACPI_REDUCED_HARDWARE) + + status = acpi_enable(); + if (ACPI_FAILURE(status)) { + acpi_os_printf("AcpiEnable failed (Status=%X)\n", + status); + return (status); + } +#endif /* !ACPI_REDUCED_HARDWARE */ + break; + + case CMD_EVENT: + + acpi_os_printf("Event command not implemented\n"); + break; + + case CMD_GPE: + + acpi_db_generate_gpe(acpi_gbl_db_args[1], acpi_gbl_db_args[2]); + break; + + case CMD_GPES: + + acpi_db_display_gpes(); + break; + + case CMD_SCI: + + acpi_db_generate_sci(); + break; + + case CMD_SLEEP: + + status = acpi_db_sleep(acpi_gbl_db_args[1]); + break; + + /* File I/O commands. */ + + case CMD_CLOSE: + + acpi_db_close_debug_file(); + break; + + case CMD_LOAD: + + status = + acpi_db_get_table_from_file(acpi_gbl_db_args[1], NULL, + FALSE); + break; + + case CMD_OPEN: + + acpi_db_open_debug_file(acpi_gbl_db_args[1]); + break; + + /* User space commands. */ + + case CMD_TERMINATE: + + acpi_db_set_output_destination(ACPI_DB_REDIRECTABLE_OUTPUT); + acpi_ut_subsystem_shutdown(); + + /* + * TBD: [Restructure] Need some way to re-initialize without + * re-creating the semaphores! + */ + + /* acpi_initialize (NULL); */ + break; + + case CMD_THREADS: + + acpi_db_create_execution_threads(acpi_gbl_db_args[1], + acpi_gbl_db_args[2], + acpi_gbl_db_args[3]); + break; + + /* Debug test commands. */ + + case CMD_PREDEFINED: + + acpi_db_check_predefined_names(); + break; + + case CMD_TEST: + + acpi_db_execute_test(acpi_gbl_db_args[1]); + break; + + case CMD_UNLOAD: + + acpi_db_unload_acpi_table(acpi_gbl_db_args[1]); + break; +#endif + + case CMD_EXIT: + case CMD_QUIT: + + if (op) { + acpi_os_printf("Method execution terminated\n"); + return (AE_CTRL_TERMINATE); + } + + if (!acpi_gbl_db_output_to_file) { + acpi_dbg_level = ACPI_DEBUG_DEFAULT; + } +#ifdef ACPI_APPLICATION + acpi_db_close_debug_file(); +#endif + acpi_gbl_db_terminate_threads = TRUE; + return (AE_CTRL_TERMINATE); + + case CMD_NOT_FOUND: + default: + + acpi_os_printf("%s: unknown command\n", acpi_gbl_db_args[0]); + return (AE_CTRL_TRUE); + } + + if (ACPI_SUCCESS(status)) { + status = AE_CTRL_TRUE; + } + + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_execute_thread + * + * PARAMETERS: context - Not used + * + * RETURN: None + * + * DESCRIPTION: Debugger execute thread. Waits for a command line, then + * simply dispatches it. + * + ******************************************************************************/ + +void ACPI_SYSTEM_XFACE acpi_db_execute_thread(void *context) +{ + acpi_status status = AE_OK; + acpi_status Mstatus; + + while (status != AE_CTRL_TERMINATE) { + acpi_gbl_method_executing = FALSE; + acpi_gbl_step_to_next_call = FALSE; + + Mstatus = acpi_os_acquire_mutex(acpi_gbl_db_command_ready, + ACPI_WAIT_FOREVER); + if (ACPI_FAILURE(Mstatus)) { + return; + } + + status = + acpi_db_command_dispatch(acpi_gbl_db_line_buf, NULL, NULL); + + acpi_os_release_mutex(acpi_gbl_db_command_complete); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_single_thread + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Debugger execute thread. Waits for a command line, then + * simply dispatches it. + * + ******************************************************************************/ + +static void acpi_db_single_thread(void) +{ + + acpi_gbl_method_executing = FALSE; + acpi_gbl_step_to_next_call = FALSE; + + (void)acpi_db_command_dispatch(acpi_gbl_db_line_buf, NULL, NULL); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_user_commands + * + * PARAMETERS: prompt - User prompt (depends on mode) + * op - Current executing parse op + * + * RETURN: None + * + * DESCRIPTION: Command line execution for the AML debugger. Commands are + * matched and dispatched here. + * + ******************************************************************************/ + +acpi_status acpi_db_user_commands(char prompt, union acpi_parse_object *op) +{ + acpi_status status = AE_OK; + + acpi_os_printf("\n"); + + /* TBD: [Restructure] Need a separate command line buffer for step mode */ + + while (!acpi_gbl_db_terminate_threads) { + + /* Force output to console until a command is entered */ + + acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT); + + /* Different prompt if method is executing */ + + if (!acpi_gbl_method_executing) { + acpi_os_printf("%1c ", ACPI_DEBUGGER_COMMAND_PROMPT); + } else { + acpi_os_printf("%1c ", ACPI_DEBUGGER_EXECUTE_PROMPT); + } + + /* Get the user input line */ + + status = acpi_os_get_line(acpi_gbl_db_line_buf, + ACPI_DB_LINE_BUFFER_SIZE, NULL); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "While parsing command line")); + return (status); + } + + /* Check for single or multithreaded debug */ + + if (acpi_gbl_debugger_configuration & DEBUGGER_MULTI_THREADED) { + /* + * Signal the debug thread that we have a command to execute, + * and wait for the command to complete. + */ + acpi_os_release_mutex(acpi_gbl_db_command_ready); + if (ACPI_FAILURE(status)) { + return (status); + } + + status = + acpi_os_acquire_mutex(acpi_gbl_db_command_complete, + ACPI_WAIT_FOREVER); + if (ACPI_FAILURE(status)) { + return (status); + } + } else { + /* Just call to the command line interpreter */ + + acpi_db_single_thread(); + } + } + + /* Shut down the debugger */ + + acpi_terminate_debugger(); + + /* + * Only this thread (the original thread) should actually terminate the + * subsystem, because all the semaphores are deleted during termination + */ + status = acpi_terminate(); + return (status); +} diff --git a/drivers/acpi/acpica/dbmethod.c b/drivers/acpi/acpica/dbmethod.c new file mode 100644 index 000000000000..01e5a71147fd --- /dev/null +++ b/drivers/acpi/acpica/dbmethod.c @@ -0,0 +1,369 @@ +/******************************************************************************* + * + * Module Name: dbmethod - Debug commands for control methods + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acdispat.h" +#include "acnamesp.h" +#include "acdebug.h" +#include "acparser.h" +#include "acpredef.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbmethod") + +/******************************************************************************* + * + * FUNCTION: acpi_db_set_method_breakpoint + * + * PARAMETERS: location - AML offset of breakpoint + * walk_state - Current walk info + * op - Current Op (from parse walk) + * + * RETURN: None + * + * DESCRIPTION: Set a breakpoint in a control method at the specified + * AML offset + * + ******************************************************************************/ +void +acpi_db_set_method_breakpoint(char *location, + struct acpi_walk_state *walk_state, + union acpi_parse_object *op) +{ + u32 address; + u32 aml_offset; + + if (!op) { + acpi_os_printf("There is no method currently executing\n"); + return; + } + + /* Get and verify the breakpoint address */ + + address = strtoul(location, NULL, 16); + aml_offset = (u32)ACPI_PTR_DIFF(op->common.aml, + walk_state->parser_state.aml_start); + if (address <= aml_offset) { + acpi_os_printf("Breakpoint %X is beyond current address %X\n", + address, aml_offset); + } + + /* Save breakpoint in current walk */ + + walk_state->user_breakpoint = address; + acpi_os_printf("Breakpoint set at AML offset %X\n", address); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_set_method_call_breakpoint + * + * PARAMETERS: op - Current Op (from parse walk) + * + * RETURN: None + * + * DESCRIPTION: Set a breakpoint in a control method at the specified + * AML offset + * + ******************************************************************************/ + +void acpi_db_set_method_call_breakpoint(union acpi_parse_object *op) +{ + + if (!op) { + acpi_os_printf("There is no method currently executing\n"); + return; + } + + acpi_gbl_step_to_next_call = TRUE; +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_set_method_data + * + * PARAMETERS: type_arg - L for local, A for argument + * index_arg - which one + * value_arg - Value to set. + * + * RETURN: None + * + * DESCRIPTION: Set a local or argument for the running control method. + * NOTE: only object supported is Number. + * + ******************************************************************************/ + +void acpi_db_set_method_data(char *type_arg, char *index_arg, char *value_arg) +{ + char type; + u32 index; + u32 value; + struct acpi_walk_state *walk_state; + union acpi_operand_object *obj_desc; + acpi_status status; + struct acpi_namespace_node *node; + + /* Validate type_arg */ + + acpi_ut_strupr(type_arg); + type = type_arg[0]; + if ((type != 'L') && (type != 'A') && (type != 'N')) { + acpi_os_printf("Invalid SET operand: %s\n", type_arg); + return; + } + + value = strtoul(value_arg, NULL, 16); + + if (type == 'N') { + node = acpi_db_convert_to_node(index_arg); + if (!node) { + return; + } + + if (node->type != ACPI_TYPE_INTEGER) { + acpi_os_printf("Can only set Integer nodes\n"); + return; + } + obj_desc = node->object; + obj_desc->integer.value = value; + return; + } + + /* Get the index and value */ + + index = strtoul(index_arg, NULL, 16); + + walk_state = acpi_ds_get_current_walk_state(acpi_gbl_current_walk_list); + if (!walk_state) { + acpi_os_printf("There is no method currently executing\n"); + return; + } + + /* Create and initialize the new object */ + + obj_desc = acpi_ut_create_integer_object((u64)value); + if (!obj_desc) { + acpi_os_printf("Could not create an internal object\n"); + return; + } + + /* Store the new object into the target */ + + switch (type) { + case 'A': + + /* Set a method argument */ + + if (index > ACPI_METHOD_MAX_ARG) { + acpi_os_printf("Arg%u - Invalid argument name\n", + index); + goto cleanup; + } + + status = acpi_ds_store_object_to_local(ACPI_REFCLASS_ARG, + index, obj_desc, + walk_state); + if (ACPI_FAILURE(status)) { + goto cleanup; + } + + obj_desc = walk_state->arguments[index].object; + + acpi_os_printf("Arg%u: ", index); + acpi_db_display_internal_object(obj_desc, walk_state); + break; + + case 'L': + + /* Set a method local */ + + if (index > ACPI_METHOD_MAX_LOCAL) { + acpi_os_printf + ("Local%u - Invalid local variable name\n", index); + goto cleanup; + } + + status = acpi_ds_store_object_to_local(ACPI_REFCLASS_LOCAL, + index, obj_desc, + walk_state); + if (ACPI_FAILURE(status)) { + goto cleanup; + } + + obj_desc = walk_state->local_variables[index].object; + + acpi_os_printf("Local%u: ", index); + acpi_db_display_internal_object(obj_desc, walk_state); + break; + + default: + + break; + } + +cleanup: + acpi_ut_remove_reference(obj_desc); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_disassemble_aml + * + * PARAMETERS: statements - Number of statements to disassemble + * op - Current Op (from parse walk) + * + * RETURN: None + * + * DESCRIPTION: Display disassembled AML (ASL) starting from Op for the number + * of statements specified. + * + ******************************************************************************/ + +void acpi_db_disassemble_aml(char *statements, union acpi_parse_object *op) +{ + u32 num_statements = 8; + + if (!op) { + acpi_os_printf("There is no method currently executing\n"); + return; + } + + if (statements) { + num_statements = strtoul(statements, NULL, 0); + } +#ifdef ACPI_DISASSEMBLER + acpi_dm_disassemble(NULL, op, num_statements); +#endif +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_disassemble_method + * + * PARAMETERS: name - Name of control method + * + * RETURN: None + * + * DESCRIPTION: Display disassembled AML (ASL) starting from Op for the number + * of statements specified. + * + ******************************************************************************/ + +acpi_status acpi_db_disassemble_method(char *name) +{ + acpi_status status; + union acpi_parse_object *op; + struct acpi_walk_state *walk_state; + union acpi_operand_object *obj_desc; + struct acpi_namespace_node *method; + + method = acpi_db_convert_to_node(name); + if (!method) { + return (AE_BAD_PARAMETER); + } + + if (method->type != ACPI_TYPE_METHOD) { + ACPI_ERROR((AE_INFO, "%s (%s): Object must be a control method", + name, acpi_ut_get_type_name(method->type))); + return (AE_BAD_PARAMETER); + } + + obj_desc = method->object; + + op = acpi_ps_create_scope_op(obj_desc->method.aml_start); + if (!op) { + return (AE_NO_MEMORY); + } + + /* Create and initialize a new walk state */ + + walk_state = acpi_ds_create_walk_state(0, op, NULL, NULL); + if (!walk_state) { + return (AE_NO_MEMORY); + } + + status = acpi_ds_init_aml_walk(walk_state, op, NULL, + obj_desc->method.aml_start, + obj_desc->method.aml_length, NULL, + ACPI_IMODE_LOAD_PASS1); + if (ACPI_FAILURE(status)) { + return (status); + } + + status = acpi_ut_allocate_owner_id(&obj_desc->method.owner_id); + walk_state->owner_id = obj_desc->method.owner_id; + + /* Push start scope on scope stack and make it current */ + + status = acpi_ds_scope_stack_push(method, method->type, walk_state); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Parse the entire method AML including deferred operators */ + + walk_state->parse_flags &= ~ACPI_PARSE_DELETE_TREE; + walk_state->parse_flags |= ACPI_PARSE_DISASSEMBLE; + + status = acpi_ps_parse_aml(walk_state); + +#ifdef ACPI_DISASSEMBLER + (void)acpi_dm_parse_deferred_ops(op); + + /* Now we can disassemble the method */ + + acpi_gbl_dm_opt_verbose = FALSE; + acpi_dm_disassemble(NULL, op, 0); + acpi_gbl_dm_opt_verbose = TRUE; +#endif + + acpi_ps_delete_parse_tree(op); + + /* Method cleanup */ + + acpi_ns_delete_namespace_subtree(method); + acpi_ns_delete_namespace_by_owner(obj_desc->method.owner_id); + acpi_ut_release_owner_id(&obj_desc->method.owner_id); + return (AE_OK); +} diff --git a/drivers/acpi/acpica/dbnames.c b/drivers/acpi/acpica/dbnames.c new file mode 100644 index 000000000000..04ff1ebfda58 --- /dev/null +++ b/drivers/acpi/acpica/dbnames.c @@ -0,0 +1,947 @@ +/******************************************************************************* + * + * Module Name: dbnames - Debugger commands for the acpi namespace + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acnamesp.h" +#include "acdebug.h" +#include "acpredef.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbnames") + +/* Local prototypes */ +static acpi_status +acpi_db_walk_and_match_name(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value); + +static acpi_status +acpi_db_walk_for_predefined_names(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value); + +static acpi_status +acpi_db_walk_for_specific_objects(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value); + +static acpi_status +acpi_db_walk_for_object_counts(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value); + +static acpi_status +acpi_db_integrity_walk(acpi_handle obj_handle, + u32 nesting_level, void *context, void **return_value); + +static acpi_status +acpi_db_walk_for_references(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value); + +static acpi_status +acpi_db_bus_walk(acpi_handle obj_handle, + u32 nesting_level, void *context, void **return_value); + +/* + * Arguments for the Objects command + * These object types map directly to the ACPI_TYPES + */ +static struct acpi_db_argument_info acpi_db_object_types[] = { + {"ANY"}, + {"INTEGERS"}, + {"STRINGS"}, + {"BUFFERS"}, + {"PACKAGES"}, + {"FIELDS"}, + {"DEVICES"}, + {"EVENTS"}, + {"METHODS"}, + {"MUTEXES"}, + {"REGIONS"}, + {"POWERRESOURCES"}, + {"PROCESSORS"}, + {"THERMALZONES"}, + {"BUFFERFIELDS"}, + {"DDBHANDLES"}, + {"DEBUG"}, + {"REGIONFIELDS"}, + {"BANKFIELDS"}, + {"INDEXFIELDS"}, + {"REFERENCES"}, + {"ALIASES"}, + {"METHODALIASES"}, + {"NOTIFY"}, + {"ADDRESSHANDLER"}, + {"RESOURCE"}, + {"RESOURCEFIELD"}, + {"SCOPES"}, + {NULL} /* Must be null terminated */ +}; + +/******************************************************************************* + * + * FUNCTION: acpi_db_set_scope + * + * PARAMETERS: name - New scope path + * + * RETURN: Status + * + * DESCRIPTION: Set the "current scope" as maintained by this utility. + * The scope is used as a prefix to ACPI paths. + * + ******************************************************************************/ + +void acpi_db_set_scope(char *name) +{ + acpi_status status; + struct acpi_namespace_node *node; + + if (!name || name[0] == 0) { + acpi_os_printf("Current scope: %s\n", acpi_gbl_db_scope_buf); + return; + } + + acpi_db_prep_namestring(name); + + if (ACPI_IS_ROOT_PREFIX(name[0])) { + + /* Validate new scope from the root */ + + status = acpi_ns_get_node(acpi_gbl_root_node, name, + ACPI_NS_NO_UPSEARCH, &node); + if (ACPI_FAILURE(status)) { + goto error_exit; + } + + acpi_gbl_db_scope_buf[0] = 0; + } else { + /* Validate new scope relative to old scope */ + + status = acpi_ns_get_node(acpi_gbl_db_scope_node, name, + ACPI_NS_NO_UPSEARCH, &node); + if (ACPI_FAILURE(status)) { + goto error_exit; + } + } + + /* Build the final pathname */ + + if (acpi_ut_safe_strcat + (acpi_gbl_db_scope_buf, sizeof(acpi_gbl_db_scope_buf), name)) { + status = AE_BUFFER_OVERFLOW; + goto error_exit; + } + + if (acpi_ut_safe_strcat + (acpi_gbl_db_scope_buf, sizeof(acpi_gbl_db_scope_buf), "\\")) { + status = AE_BUFFER_OVERFLOW; + goto error_exit; + } + + acpi_gbl_db_scope_node = node; + acpi_os_printf("New scope: %s\n", acpi_gbl_db_scope_buf); + return; + +error_exit: + + acpi_os_printf("Could not attach scope: %s, %s\n", + name, acpi_format_exception(status)); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_dump_namespace + * + * PARAMETERS: start_arg - Node to begin namespace dump + * depth_arg - Maximum tree depth to be dumped + * + * RETURN: None + * + * DESCRIPTION: Dump entire namespace or a subtree. Each node is displayed + * with type and other information. + * + ******************************************************************************/ + +void acpi_db_dump_namespace(char *start_arg, char *depth_arg) +{ + acpi_handle subtree_entry = acpi_gbl_root_node; + u32 max_depth = ACPI_UINT32_MAX; + + /* No argument given, just start at the root and dump entire namespace */ + + if (start_arg) { + subtree_entry = acpi_db_convert_to_node(start_arg); + if (!subtree_entry) { + return; + } + + /* Now we can check for the depth argument */ + + if (depth_arg) { + max_depth = strtoul(depth_arg, NULL, 0); + } + } + + acpi_db_set_output_destination(ACPI_DB_DUPLICATE_OUTPUT); + acpi_os_printf("ACPI Namespace (from %4.4s (%p) subtree):\n", + ((struct acpi_namespace_node *)subtree_entry)->name. + ascii, subtree_entry); + + /* Display the subtree */ + + acpi_db_set_output_destination(ACPI_DB_REDIRECTABLE_OUTPUT); + acpi_ns_dump_objects(ACPI_TYPE_ANY, ACPI_DISPLAY_SUMMARY, max_depth, + ACPI_OWNER_ID_MAX, subtree_entry); + acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_dump_namespace_paths + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Dump entire namespace with full object pathnames and object + * type information. Alternative to "namespace" command. + * + ******************************************************************************/ + +void acpi_db_dump_namespace_paths(void) +{ + + acpi_db_set_output_destination(ACPI_DB_DUPLICATE_OUTPUT); + acpi_os_printf("ACPI Namespace (from root):\n"); + + /* Display the entire namespace */ + + acpi_db_set_output_destination(ACPI_DB_REDIRECTABLE_OUTPUT); + acpi_ns_dump_object_paths(ACPI_TYPE_ANY, ACPI_DISPLAY_SUMMARY, + ACPI_UINT32_MAX, ACPI_OWNER_ID_MAX, + acpi_gbl_root_node); + + acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_dump_namespace_by_owner + * + * PARAMETERS: owner_arg - Owner ID whose nodes will be displayed + * depth_arg - Maximum tree depth to be dumped + * + * RETURN: None + * + * DESCRIPTION: Dump elements of the namespace that are owned by the owner_id. + * + ******************************************************************************/ + +void acpi_db_dump_namespace_by_owner(char *owner_arg, char *depth_arg) +{ + acpi_handle subtree_entry = acpi_gbl_root_node; + u32 max_depth = ACPI_UINT32_MAX; + acpi_owner_id owner_id; + + owner_id = (acpi_owner_id) strtoul(owner_arg, NULL, 0); + + /* Now we can check for the depth argument */ + + if (depth_arg) { + max_depth = strtoul(depth_arg, NULL, 0); + } + + acpi_db_set_output_destination(ACPI_DB_DUPLICATE_OUTPUT); + acpi_os_printf("ACPI Namespace by owner %X:\n", owner_id); + + /* Display the subtree */ + + acpi_db_set_output_destination(ACPI_DB_REDIRECTABLE_OUTPUT); + acpi_ns_dump_objects(ACPI_TYPE_ANY, ACPI_DISPLAY_SUMMARY, max_depth, + owner_id, subtree_entry); + acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_walk_and_match_name + * + * PARAMETERS: Callback from walk_namespace + * + * RETURN: Status + * + * DESCRIPTION: Find a particular name/names within the namespace. Wildcards + * are supported -- '?' matches any character. + * + ******************************************************************************/ + +static acpi_status +acpi_db_walk_and_match_name(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value) +{ + acpi_status status; + char *requested_name = (char *)context; + u32 i; + struct acpi_buffer buffer; + struct acpi_walk_info info; + + /* Check for a name match */ + + for (i = 0; i < 4; i++) { + + /* Wildcard support */ + + if ((requested_name[i] != '?') && + (requested_name[i] != ((struct acpi_namespace_node *) + obj_handle)->name.ascii[i])) { + + /* No match, just exit */ + + return (AE_OK); + } + } + + /* Get the full pathname to this object */ + + buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER; + status = acpi_ns_handle_to_pathname(obj_handle, &buffer, TRUE); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could Not get pathname for object %p\n", + obj_handle); + } else { + info.owner_id = ACPI_OWNER_ID_MAX; + info.debug_level = ACPI_UINT32_MAX; + info.display_type = ACPI_DISPLAY_SUMMARY | ACPI_DISPLAY_SHORT; + + acpi_os_printf("%32s", (char *)buffer.pointer); + (void)acpi_ns_dump_one_object(obj_handle, nesting_level, &info, + NULL); + ACPI_FREE(buffer.pointer); + } + + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_find_name_in_namespace + * + * PARAMETERS: name_arg - The 4-character ACPI name to find. + * wildcards are supported. + * + * RETURN: None + * + * DESCRIPTION: Search the namespace for a given name (with wildcards) + * + ******************************************************************************/ + +acpi_status acpi_db_find_name_in_namespace(char *name_arg) +{ + char acpi_name[5] = "____"; + char *acpi_name_ptr = acpi_name; + + if (strlen(name_arg) > ACPI_NAME_SIZE) { + acpi_os_printf("Name must be no longer than 4 characters\n"); + return (AE_OK); + } + + /* Pad out name with underscores as necessary to create a 4-char name */ + + acpi_ut_strupr(name_arg); + while (*name_arg) { + *acpi_name_ptr = *name_arg; + acpi_name_ptr++; + name_arg++; + } + + /* Walk the namespace from the root */ + + (void)acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, acpi_db_walk_and_match_name, + NULL, acpi_name, NULL); + + acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT); + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_walk_for_predefined_names + * + * PARAMETERS: Callback from walk_namespace + * + * RETURN: Status + * + * DESCRIPTION: Detect and display predefined ACPI names (names that start with + * an underscore) + * + ******************************************************************************/ + +static acpi_status +acpi_db_walk_for_predefined_names(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value) +{ + struct acpi_namespace_node *node = + (struct acpi_namespace_node *)obj_handle; + u32 *count = (u32 *)context; + const union acpi_predefined_info *predefined; + const union acpi_predefined_info *package = NULL; + char *pathname; + char string_buffer[48]; + + predefined = acpi_ut_match_predefined_method(node->name.ascii); + if (!predefined) { + return (AE_OK); + } + + pathname = acpi_ns_get_external_pathname(node); + if (!pathname) { + return (AE_OK); + } + + /* If method returns a package, the info is in the next table entry */ + + if (predefined->info.expected_btypes & ACPI_RTYPE_PACKAGE) { + package = predefined + 1; + } + + acpi_ut_get_expected_return_types(string_buffer, + predefined->info.expected_btypes); + + acpi_os_printf("%-32s Arguments %X, Return Types: %s", pathname, + METHOD_GET_ARG_COUNT(predefined->info.argument_list), + string_buffer); + + if (package) { + acpi_os_printf(" (PkgType %2.2X, ObjType %2.2X, Count %2.2X)", + package->ret_info.type, + package->ret_info.object_type1, + package->ret_info.count1); + } + + acpi_os_printf("\n"); + + /* Check that the declared argument count matches the ACPI spec */ + + acpi_ns_check_acpi_compliance(pathname, node, predefined); + + ACPI_FREE(pathname); + (*count)++; + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_check_predefined_names + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Validate all predefined names in the namespace + * + ******************************************************************************/ + +void acpi_db_check_predefined_names(void) +{ + u32 count = 0; + + /* Search all nodes in namespace */ + + (void)acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, + acpi_db_walk_for_predefined_names, NULL, + (void *)&count, NULL); + + acpi_os_printf("Found %u predefined names in the namespace\n", count); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_walk_for_object_counts + * + * PARAMETERS: Callback from walk_namespace + * + * RETURN: Status + * + * DESCRIPTION: Display short info about objects in the namespace + * + ******************************************************************************/ + +static acpi_status +acpi_db_walk_for_object_counts(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value) +{ + struct acpi_object_info *info = (struct acpi_object_info *)context; + struct acpi_namespace_node *node = + (struct acpi_namespace_node *)obj_handle; + + if (node->type > ACPI_TYPE_NS_NODE_MAX) { + acpi_os_printf("[%4.4s]: Unknown object type %X\n", + node->name.ascii, node->type); + } else { + info->types[node->type]++; + } + + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_walk_for_specific_objects + * + * PARAMETERS: Callback from walk_namespace + * + * RETURN: Status + * + * DESCRIPTION: Display short info about objects in the namespace + * + ******************************************************************************/ + +static acpi_status +acpi_db_walk_for_specific_objects(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value) +{ + struct acpi_walk_info *info = (struct acpi_walk_info *)context; + struct acpi_buffer buffer; + acpi_status status; + + info->count++; + + /* Get and display the full pathname to this object */ + + buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER; + status = acpi_ns_handle_to_pathname(obj_handle, &buffer, TRUE); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could Not get pathname for object %p\n", + obj_handle); + return (AE_OK); + } + + acpi_os_printf("%32s", (char *)buffer.pointer); + ACPI_FREE(buffer.pointer); + + /* Dump short info about the object */ + + (void)acpi_ns_dump_one_object(obj_handle, nesting_level, info, NULL); + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_objects + * + * PARAMETERS: obj_type_arg - Type of object to display + * display_count_arg - Max depth to display + * + * RETURN: None + * + * DESCRIPTION: Display objects in the namespace of the requested type + * + ******************************************************************************/ + +acpi_status acpi_db_display_objects(char *obj_type_arg, char *display_count_arg) +{ + struct acpi_walk_info info; + acpi_object_type type; + struct acpi_object_info *object_info; + u32 i; + u32 total_objects = 0; + + /* No argument means display summary/count of all object types */ + + if (!obj_type_arg) { + object_info = + ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_object_info)); + + /* Walk the namespace from the root */ + + (void)acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, + acpi_db_walk_for_object_counts, NULL, + (void *)object_info, NULL); + + acpi_os_printf("\nSummary of namespace objects:\n\n"); + + for (i = 0; i < ACPI_TOTAL_TYPES; i++) { + acpi_os_printf("%8u %s\n", object_info->types[i], + acpi_ut_get_type_name(i)); + + total_objects += object_info->types[i]; + } + + acpi_os_printf("\n%8u Total namespace objects\n\n", + total_objects); + + ACPI_FREE(object_info); + return (AE_OK); + } + + /* Get the object type */ + + type = acpi_db_match_argument(obj_type_arg, acpi_db_object_types); + if (type == ACPI_TYPE_NOT_FOUND) { + acpi_os_printf("Invalid or unsupported argument\n"); + return (AE_OK); + } + + acpi_db_set_output_destination(ACPI_DB_DUPLICATE_OUTPUT); + acpi_os_printf + ("Objects of type [%s] defined in the current ACPI Namespace:\n", + acpi_ut_get_type_name(type)); + + acpi_db_set_output_destination(ACPI_DB_REDIRECTABLE_OUTPUT); + + info.count = 0; + info.owner_id = ACPI_OWNER_ID_MAX; + info.debug_level = ACPI_UINT32_MAX; + info.display_type = ACPI_DISPLAY_SUMMARY | ACPI_DISPLAY_SHORT; + + /* Walk the namespace from the root */ + + (void)acpi_walk_namespace(type, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, + acpi_db_walk_for_specific_objects, NULL, + (void *)&info, NULL); + + acpi_os_printf + ("\nFound %u objects of type [%s] in the current ACPI Namespace\n", + info.count, acpi_ut_get_type_name(type)); + + acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT); + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_integrity_walk + * + * PARAMETERS: Callback from walk_namespace + * + * RETURN: Status + * + * DESCRIPTION: Examine one NS node for valid values. + * + ******************************************************************************/ + +static acpi_status +acpi_db_integrity_walk(acpi_handle obj_handle, + u32 nesting_level, void *context, void **return_value) +{ + struct acpi_integrity_info *info = + (struct acpi_integrity_info *)context; + struct acpi_namespace_node *node = + (struct acpi_namespace_node *)obj_handle; + union acpi_operand_object *object; + u8 alias = TRUE; + + info->nodes++; + + /* Verify the NS node, and dereference aliases */ + + while (alias) { + if (ACPI_GET_DESCRIPTOR_TYPE(node) != ACPI_DESC_TYPE_NAMED) { + acpi_os_printf + ("Invalid Descriptor Type for Node %p [%s] - " + "is %2.2X should be %2.2X\n", node, + acpi_ut_get_descriptor_name(node), + ACPI_GET_DESCRIPTOR_TYPE(node), + ACPI_DESC_TYPE_NAMED); + return (AE_OK); + } + + if ((node->type == ACPI_TYPE_LOCAL_ALIAS) || + (node->type == ACPI_TYPE_LOCAL_METHOD_ALIAS)) { + node = (struct acpi_namespace_node *)node->object; + } else { + alias = FALSE; + } + } + + if (node->type > ACPI_TYPE_LOCAL_MAX) { + acpi_os_printf("Invalid Object Type for Node %p, Type = %X\n", + node, node->type); + return (AE_OK); + } + + if (!acpi_ut_valid_acpi_name(node->name.ascii)) { + acpi_os_printf("Invalid AcpiName for Node %p\n", node); + return (AE_OK); + } + + object = acpi_ns_get_attached_object(node); + if (object) { + info->objects++; + if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND) { + acpi_os_printf + ("Invalid Descriptor Type for Object %p [%s]\n", + object, acpi_ut_get_descriptor_name(object)); + } + } + + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_check_integrity + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Check entire namespace for data structure integrity + * + ******************************************************************************/ + +void acpi_db_check_integrity(void) +{ + struct acpi_integrity_info info = { 0, 0 }; + + /* Search all nodes in namespace */ + + (void)acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, acpi_db_integrity_walk, NULL, + (void *)&info, NULL); + + acpi_os_printf("Verified %u namespace nodes with %u Objects\n", + info.nodes, info.objects); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_walk_for_references + * + * PARAMETERS: Callback from walk_namespace + * + * RETURN: Status + * + * DESCRIPTION: Check if this namespace object refers to the target object + * that is passed in as the context value. + * + * Note: Currently doesn't check subobjects within the Node's object + * + ******************************************************************************/ + +static acpi_status +acpi_db_walk_for_references(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value) +{ + union acpi_operand_object *obj_desc = + (union acpi_operand_object *)context; + struct acpi_namespace_node *node = + (struct acpi_namespace_node *)obj_handle; + + /* Check for match against the namespace node itself */ + + if (node == (void *)obj_desc) { + acpi_os_printf("Object is a Node [%4.4s]\n", + acpi_ut_get_node_name(node)); + } + + /* Check for match against the object attached to the node */ + + if (acpi_ns_get_attached_object(node) == obj_desc) { + acpi_os_printf("Reference at Node->Object %p [%4.4s]\n", + node, acpi_ut_get_node_name(node)); + } + + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_find_references + * + * PARAMETERS: object_arg - String with hex value of the object + * + * RETURN: None + * + * DESCRIPTION: Search namespace for all references to the input object + * + ******************************************************************************/ + +void acpi_db_find_references(char *object_arg) +{ + union acpi_operand_object *obj_desc; + acpi_size address; + + /* Convert string to object pointer */ + + address = strtoul(object_arg, NULL, 16); + obj_desc = ACPI_TO_POINTER(address); + + /* Search all nodes in namespace */ + + (void)acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, acpi_db_walk_for_references, + NULL, (void *)obj_desc, NULL); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_bus_walk + * + * PARAMETERS: Callback from walk_namespace + * + * RETURN: Status + * + * DESCRIPTION: Display info about device objects that have a corresponding + * _PRT method. + * + ******************************************************************************/ + +static acpi_status +acpi_db_bus_walk(acpi_handle obj_handle, + u32 nesting_level, void *context, void **return_value) +{ + struct acpi_namespace_node *node = + (struct acpi_namespace_node *)obj_handle; + acpi_status status; + struct acpi_buffer buffer; + struct acpi_namespace_node *temp_node; + struct acpi_device_info *info; + u32 i; + + if ((node->type != ACPI_TYPE_DEVICE) && + (node->type != ACPI_TYPE_PROCESSOR)) { + return (AE_OK); + } + + /* Exit if there is no _PRT under this device */ + + status = acpi_get_handle(node, METHOD_NAME__PRT, + ACPI_CAST_PTR(acpi_handle, &temp_node)); + if (ACPI_FAILURE(status)) { + return (AE_OK); + } + + /* Get the full path to this device object */ + + buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER; + status = acpi_ns_handle_to_pathname(obj_handle, &buffer, TRUE); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could Not get pathname for object %p\n", + obj_handle); + return (AE_OK); + } + + status = acpi_get_object_info(obj_handle, &info); + if (ACPI_FAILURE(status)) { + return (AE_OK); + } + + /* Display the full path */ + + acpi_os_printf("%-32s Type %X", (char *)buffer.pointer, node->type); + ACPI_FREE(buffer.pointer); + + if (info->flags & ACPI_PCI_ROOT_BRIDGE) { + acpi_os_printf(" - Is PCI Root Bridge"); + } + acpi_os_printf("\n"); + + /* _PRT info */ + + acpi_os_printf("_PRT: %p\n", temp_node); + + /* Dump _ADR, _HID, _UID, _CID */ + + if (info->valid & ACPI_VALID_ADR) { + acpi_os_printf("_ADR: %8.8X%8.8X\n", + ACPI_FORMAT_UINT64(info->address)); + } else { + acpi_os_printf("_ADR: <Not Present>\n"); + } + + if (info->valid & ACPI_VALID_HID) { + acpi_os_printf("_HID: %s\n", info->hardware_id.string); + } else { + acpi_os_printf("_HID: <Not Present>\n"); + } + + if (info->valid & ACPI_VALID_UID) { + acpi_os_printf("_UID: %s\n", info->unique_id.string); + } else { + acpi_os_printf("_UID: <Not Present>\n"); + } + + if (info->valid & ACPI_VALID_CID) { + for (i = 0; i < info->compatible_id_list.count; i++) { + acpi_os_printf("_CID: %s\n", + info->compatible_id_list.ids[i].string); + } + } else { + acpi_os_printf("_CID: <Not Present>\n"); + } + + ACPI_FREE(info); + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_get_bus_info + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Display info about system busses. + * + ******************************************************************************/ + +void acpi_db_get_bus_info(void) +{ + /* Search all nodes in namespace */ + + (void)acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, acpi_db_bus_walk, NULL, NULL, + NULL); +} diff --git a/drivers/acpi/acpica/dbobject.c b/drivers/acpi/acpica/dbobject.c new file mode 100644 index 000000000000..116f6db8c2ed --- /dev/null +++ b/drivers/acpi/acpica/dbobject.c @@ -0,0 +1,533 @@ +/******************************************************************************* + * + * Module Name: dbobject - ACPI object decode and display + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acnamesp.h" +#include "acdebug.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbobject") + +/* Local prototypes */ +static void acpi_db_decode_node(struct acpi_namespace_node *node); + +/******************************************************************************* + * + * FUNCTION: acpi_db_dump_method_info + * + * PARAMETERS: status - Method execution status + * walk_state - Current state of the parse tree walk + * + * RETURN: None + * + * DESCRIPTION: Called when a method has been aborted because of an error. + * Dumps the method execution stack, and the method locals/args, + * and disassembles the AML opcode that failed. + * + ******************************************************************************/ + +void +acpi_db_dump_method_info(acpi_status status, struct acpi_walk_state *walk_state) +{ + struct acpi_thread_state *thread; + + /* Ignore control codes, they are not errors */ + + if ((status & AE_CODE_MASK) == AE_CODE_CONTROL) { + return; + } + + /* We may be executing a deferred opcode */ + + if (walk_state->deferred_node) { + acpi_os_printf("Executing subtree for Buffer/Package/Region\n"); + return; + } + + /* + * If there is no Thread, we are not actually executing a method. + * This can happen when the iASL compiler calls the interpreter + * to perform constant folding. + */ + thread = walk_state->thread; + if (!thread) { + return; + } + + /* Display the method locals and arguments */ + + acpi_os_printf("\n"); + acpi_db_decode_locals(walk_state); + acpi_os_printf("\n"); + acpi_db_decode_arguments(walk_state); + acpi_os_printf("\n"); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_decode_internal_object + * + * PARAMETERS: obj_desc - Object to be displayed + * + * RETURN: None + * + * DESCRIPTION: Short display of an internal object. Numbers/Strings/Buffers. + * + ******************************************************************************/ + +void acpi_db_decode_internal_object(union acpi_operand_object *obj_desc) +{ + u32 i; + + if (!obj_desc) { + acpi_os_printf(" Uninitialized"); + return; + } + + if (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) != ACPI_DESC_TYPE_OPERAND) { + acpi_os_printf(" %p [%s]", obj_desc, + acpi_ut_get_descriptor_name(obj_desc)); + return; + } + + acpi_os_printf(" %s", acpi_ut_get_object_type_name(obj_desc)); + + switch (obj_desc->common.type) { + case ACPI_TYPE_INTEGER: + + acpi_os_printf(" %8.8X%8.8X", + ACPI_FORMAT_UINT64(obj_desc->integer.value)); + break; + + case ACPI_TYPE_STRING: + + acpi_os_printf("(%u) \"%.24s", + obj_desc->string.length, + obj_desc->string.pointer); + + if (obj_desc->string.length > 24) { + acpi_os_printf("..."); + } else { + acpi_os_printf("\""); + } + break; + + case ACPI_TYPE_BUFFER: + + acpi_os_printf("(%u)", obj_desc->buffer.length); + for (i = 0; (i < 8) && (i < obj_desc->buffer.length); i++) { + acpi_os_printf(" %2.2X", obj_desc->buffer.pointer[i]); + } + break; + + default: + + acpi_os_printf(" %p", obj_desc); + break; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_decode_node + * + * PARAMETERS: node - Object to be displayed + * + * RETURN: None + * + * DESCRIPTION: Short display of a namespace node + * + ******************************************************************************/ + +static void acpi_db_decode_node(struct acpi_namespace_node *node) +{ + + acpi_os_printf("<Node> Name %4.4s", + acpi_ut_get_node_name(node)); + + if (node->flags & ANOBJ_METHOD_ARG) { + acpi_os_printf(" [Method Arg]"); + } + if (node->flags & ANOBJ_METHOD_LOCAL) { + acpi_os_printf(" [Method Local]"); + } + + switch (node->type) { + + /* These types have no attached object */ + + case ACPI_TYPE_DEVICE: + + acpi_os_printf(" Device"); + break; + + case ACPI_TYPE_THERMAL: + + acpi_os_printf(" Thermal Zone"); + break; + + default: + + acpi_db_decode_internal_object(acpi_ns_get_attached_object + (node)); + break; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_internal_object + * + * PARAMETERS: obj_desc - Object to be displayed + * walk_state - Current walk state + * + * RETURN: None + * + * DESCRIPTION: Short display of an internal object + * + ******************************************************************************/ + +void +acpi_db_display_internal_object(union acpi_operand_object *obj_desc, + struct acpi_walk_state *walk_state) +{ + u8 type; + + acpi_os_printf("%p ", obj_desc); + + if (!obj_desc) { + acpi_os_printf("<Null Object>\n"); + return; + } + + /* Decode the object type */ + + switch (ACPI_GET_DESCRIPTOR_TYPE(obj_desc)) { + case ACPI_DESC_TYPE_PARSER: + + acpi_os_printf("<Parser> "); + break; + + case ACPI_DESC_TYPE_NAMED: + + acpi_db_decode_node((struct acpi_namespace_node *)obj_desc); + break; + + case ACPI_DESC_TYPE_OPERAND: + + type = obj_desc->common.type; + if (type > ACPI_TYPE_LOCAL_MAX) { + acpi_os_printf(" Type %X [Invalid Type]", (u32)type); + return; + } + + /* Decode the ACPI object type */ + + switch (obj_desc->common.type) { + case ACPI_TYPE_LOCAL_REFERENCE: + + acpi_os_printf("[%s] ", + acpi_ut_get_reference_name(obj_desc)); + + /* Decode the refererence */ + + switch (obj_desc->reference.class) { + case ACPI_REFCLASS_LOCAL: + + acpi_os_printf("%X ", + obj_desc->reference.value); + if (walk_state) { + obj_desc = walk_state->local_variables + [obj_desc->reference.value].object; + acpi_os_printf("%p", obj_desc); + acpi_db_decode_internal_object + (obj_desc); + } + break; + + case ACPI_REFCLASS_ARG: + + acpi_os_printf("%X ", + obj_desc->reference.value); + if (walk_state) { + obj_desc = walk_state->arguments + [obj_desc->reference.value].object; + acpi_os_printf("%p", obj_desc); + acpi_db_decode_internal_object + (obj_desc); + } + break; + + case ACPI_REFCLASS_INDEX: + + switch (obj_desc->reference.target_type) { + case ACPI_TYPE_BUFFER_FIELD: + + acpi_os_printf("%p", + obj_desc->reference. + object); + acpi_db_decode_internal_object + (obj_desc->reference.object); + break; + + case ACPI_TYPE_PACKAGE: + + acpi_os_printf("%p", + obj_desc->reference. + where); + if (!obj_desc->reference.where) { + acpi_os_printf + (" Uninitialized WHERE pointer"); + } else { + acpi_db_decode_internal_object(* + (obj_desc-> + reference. + where)); + } + break; + + default: + + acpi_os_printf + ("Unknown index target type"); + break; + } + break; + + case ACPI_REFCLASS_REFOF: + + if (!obj_desc->reference.object) { + acpi_os_printf + ("Uninitialized reference subobject pointer"); + break; + } + + /* Reference can be to a Node or an Operand object */ + + switch (ACPI_GET_DESCRIPTOR_TYPE + (obj_desc->reference.object)) { + case ACPI_DESC_TYPE_NAMED: + + acpi_db_decode_node(obj_desc->reference. + object); + break; + + case ACPI_DESC_TYPE_OPERAND: + + acpi_db_decode_internal_object + (obj_desc->reference.object); + break; + + default: + break; + } + break; + + case ACPI_REFCLASS_NAME: + + acpi_db_decode_node(obj_desc->reference.node); + break; + + case ACPI_REFCLASS_DEBUG: + case ACPI_REFCLASS_TABLE: + + acpi_os_printf("\n"); + break; + + default: /* Unknown reference class */ + + acpi_os_printf("%2.2X\n", + obj_desc->reference.class); + break; + } + break; + + default: + + acpi_os_printf("<Obj> "); + acpi_db_decode_internal_object(obj_desc); + break; + } + break; + + default: + + acpi_os_printf("<Not a valid ACPI Object Descriptor> [%s]", + acpi_ut_get_descriptor_name(obj_desc)); + break; + } + + acpi_os_printf("\n"); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_decode_locals + * + * PARAMETERS: walk_state - State for current method + * + * RETURN: None + * + * DESCRIPTION: Display all locals for the currently running control method + * + ******************************************************************************/ + +void acpi_db_decode_locals(struct acpi_walk_state *walk_state) +{ + u32 i; + union acpi_operand_object *obj_desc; + struct acpi_namespace_node *node; + u8 display_locals = FALSE; + + obj_desc = walk_state->method_desc; + node = walk_state->method_node; + + if (!node) { + acpi_os_printf + ("No method node (Executing subtree for buffer or opregion)\n"); + return; + } + + if (node->type != ACPI_TYPE_METHOD) { + acpi_os_printf("Executing subtree for Buffer/Package/Region\n"); + return; + } + + /* Are any locals actually set? */ + + for (i = 0; i < ACPI_METHOD_NUM_LOCALS; i++) { + obj_desc = walk_state->local_variables[i].object; + if (obj_desc) { + display_locals = TRUE; + break; + } + } + + /* If any are set, only display the ones that are set */ + + if (display_locals) { + acpi_os_printf + ("\nInitialized Local Variables for method [%4.4s]:\n", + acpi_ut_get_node_name(node)); + + for (i = 0; i < ACPI_METHOD_NUM_LOCALS; i++) { + obj_desc = walk_state->local_variables[i].object; + if (obj_desc) { + acpi_os_printf(" Local%X: ", i); + acpi_db_display_internal_object(obj_desc, + walk_state); + } + } + } else { + acpi_os_printf + ("No Local Variables are initialized for method [%4.4s]\n", + acpi_ut_get_node_name(node)); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_decode_arguments + * + * PARAMETERS: walk_state - State for current method + * + * RETURN: None + * + * DESCRIPTION: Display all arguments for the currently running control method + * + ******************************************************************************/ + +void acpi_db_decode_arguments(struct acpi_walk_state *walk_state) +{ + u32 i; + union acpi_operand_object *obj_desc; + struct acpi_namespace_node *node; + u8 display_args = FALSE; + + node = walk_state->method_node; + obj_desc = walk_state->method_desc; + + if (!node) { + acpi_os_printf + ("No method node (Executing subtree for buffer or opregion)\n"); + return; + } + + if (node->type != ACPI_TYPE_METHOD) { + acpi_os_printf("Executing subtree for Buffer/Package/Region\n"); + return; + } + + /* Are any arguments actually set? */ + + for (i = 0; i < ACPI_METHOD_NUM_ARGS; i++) { + obj_desc = walk_state->arguments[i].object; + if (obj_desc) { + display_args = TRUE; + break; + } + } + + /* If any are set, only display the ones that are set */ + + if (display_args) { + acpi_os_printf("Initialized Arguments for Method [%4.4s]: " + "(%X arguments defined for method invocation)\n", + acpi_ut_get_node_name(node), + obj_desc->method.param_count); + + for (i = 0; i < ACPI_METHOD_NUM_ARGS; i++) { + obj_desc = walk_state->arguments[i].object; + if (obj_desc) { + acpi_os_printf(" Arg%u: ", i); + acpi_db_display_internal_object(obj_desc, + walk_state); + } + } + } else { + acpi_os_printf + ("No Arguments are initialized for method [%4.4s]\n", + acpi_ut_get_node_name(node)); + } +} diff --git a/drivers/acpi/acpica/dbstats.c b/drivers/acpi/acpica/dbstats.c new file mode 100644 index 000000000000..4ba0a20811eb --- /dev/null +++ b/drivers/acpi/acpica/dbstats.c @@ -0,0 +1,546 @@ +/******************************************************************************* + * + * Module Name: dbstats - Generation and display of ACPI table statistics + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acdebug.h" +#include "acnamesp.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbstats") + +/* Local prototypes */ +static void acpi_db_count_namespace_objects(void); + +static void acpi_db_enumerate_object(union acpi_operand_object *obj_desc); + +static acpi_status +acpi_db_classify_one_object(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value); + +#if defined ACPI_DBG_TRACK_ALLOCATIONS || defined ACPI_USE_LOCAL_CACHE +static void acpi_db_list_info(struct acpi_memory_list *list); +#endif + +/* + * Statistics subcommands + */ +static struct acpi_db_argument_info acpi_db_stat_types[] = { + {"ALLOCATIONS"}, + {"OBJECTS"}, + {"MEMORY"}, + {"MISC"}, + {"TABLES"}, + {"SIZES"}, + {"STACK"}, + {NULL} /* Must be null terminated */ +}; + +#define CMD_STAT_ALLOCATIONS 0 +#define CMD_STAT_OBJECTS 1 +#define CMD_STAT_MEMORY 2 +#define CMD_STAT_MISC 3 +#define CMD_STAT_TABLES 4 +#define CMD_STAT_SIZES 5 +#define CMD_STAT_STACK 6 + +#if defined ACPI_DBG_TRACK_ALLOCATIONS || defined ACPI_USE_LOCAL_CACHE +/******************************************************************************* + * + * FUNCTION: acpi_db_list_info + * + * PARAMETERS: list - Memory list/cache to be displayed + * + * RETURN: None + * + * DESCRIPTION: Display information about the input memory list or cache. + * + ******************************************************************************/ + +static void acpi_db_list_info(struct acpi_memory_list *list) +{ +#ifdef ACPI_DBG_TRACK_ALLOCATIONS + u32 outstanding; +#endif + + acpi_os_printf("\n%s\n", list->list_name); + + /* max_depth > 0 indicates a cache object */ + + if (list->max_depth > 0) { + acpi_os_printf + (" Cache: [Depth MaxD Avail Size] " + "%8.2X %8.2X %8.2X %8.2X\n", list->current_depth, + list->max_depth, list->max_depth - list->current_depth, + (list->current_depth * list->object_size)); + } +#ifdef ACPI_DBG_TRACK_ALLOCATIONS + if (list->max_depth > 0) { + acpi_os_printf + (" Cache: [Requests Hits Misses ObjSize] " + "%8.2X %8.2X %8.2X %8.2X\n", list->requests, list->hits, + list->requests - list->hits, list->object_size); + } + + outstanding = acpi_db_get_cache_info(list); + + if (list->object_size) { + acpi_os_printf + (" Mem: [Alloc Free Max CurSize Outstanding] " + "%8.2X %8.2X %8.2X %8.2X %8.2X\n", list->total_allocated, + list->total_freed, list->max_occupied, + outstanding * list->object_size, outstanding); + } else { + acpi_os_printf + (" Mem: [Alloc Free Max CurSize Outstanding Total] " + "%8.2X %8.2X %8.2X %8.2X %8.2X %8.2X\n", + list->total_allocated, list->total_freed, + list->max_occupied, list->current_total_size, outstanding, + list->total_size); + } +#endif +} +#endif + +/******************************************************************************* + * + * FUNCTION: acpi_db_enumerate_object + * + * PARAMETERS: obj_desc - Object to be counted + * + * RETURN: None + * + * DESCRIPTION: Add this object to the global counts, by object type. + * Limited recursion handles subobjects and packages, and this + * is probably acceptable within the AML debugger only. + * + ******************************************************************************/ + +static void acpi_db_enumerate_object(union acpi_operand_object *obj_desc) +{ + u32 i; + + if (!obj_desc) { + return; + } + + /* Enumerate this object first */ + + acpi_gbl_num_objects++; + + if (obj_desc->common.type > ACPI_TYPE_NS_NODE_MAX) { + acpi_gbl_obj_type_count_misc++; + } else { + acpi_gbl_obj_type_count[obj_desc->common.type]++; + } + + /* Count the sub-objects */ + + switch (obj_desc->common.type) { + case ACPI_TYPE_PACKAGE: + + for (i = 0; i < obj_desc->package.count; i++) { + acpi_db_enumerate_object(obj_desc->package.elements[i]); + } + break; + + case ACPI_TYPE_DEVICE: + + acpi_db_enumerate_object(obj_desc->device.notify_list[0]); + acpi_db_enumerate_object(obj_desc->device.notify_list[1]); + acpi_db_enumerate_object(obj_desc->device.handler); + break; + + case ACPI_TYPE_BUFFER_FIELD: + + if (acpi_ns_get_secondary_object(obj_desc)) { + acpi_gbl_obj_type_count[ACPI_TYPE_BUFFER_FIELD]++; + } + break; + + case ACPI_TYPE_REGION: + + acpi_gbl_obj_type_count[ACPI_TYPE_LOCAL_REGION_FIELD]++; + acpi_db_enumerate_object(obj_desc->region.handler); + break; + + case ACPI_TYPE_POWER: + + acpi_db_enumerate_object(obj_desc->power_resource. + notify_list[0]); + acpi_db_enumerate_object(obj_desc->power_resource. + notify_list[1]); + break; + + case ACPI_TYPE_PROCESSOR: + + acpi_db_enumerate_object(obj_desc->processor.notify_list[0]); + acpi_db_enumerate_object(obj_desc->processor.notify_list[1]); + acpi_db_enumerate_object(obj_desc->processor.handler); + break; + + case ACPI_TYPE_THERMAL: + + acpi_db_enumerate_object(obj_desc->thermal_zone.notify_list[0]); + acpi_db_enumerate_object(obj_desc->thermal_zone.notify_list[1]); + acpi_db_enumerate_object(obj_desc->thermal_zone.handler); + break; + + default: + + break; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_classify_one_object + * + * PARAMETERS: Callback for walk_namespace + * + * RETURN: Status + * + * DESCRIPTION: Enumerate both the object descriptor (including subobjects) and + * the parent namespace node. + * + ******************************************************************************/ + +static acpi_status +acpi_db_classify_one_object(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value) +{ + struct acpi_namespace_node *node; + union acpi_operand_object *obj_desc; + u32 type; + + acpi_gbl_num_nodes++; + + node = (struct acpi_namespace_node *)obj_handle; + obj_desc = acpi_ns_get_attached_object(node); + + acpi_db_enumerate_object(obj_desc); + + type = node->type; + if (type > ACPI_TYPE_NS_NODE_MAX) { + acpi_gbl_node_type_count_misc++; + } else { + acpi_gbl_node_type_count[type]++; + } + + return (AE_OK); + +#ifdef ACPI_FUTURE_IMPLEMENTATION + + /* TBD: These need to be counted during the initial parsing phase */ + + if (acpi_ps_is_named_op(op->opcode)) { + num_nodes++; + } + + if (is_method) { + num_method_elements++; + } + + num_grammar_elements++; + op = acpi_ps_get_depth_next(root, op); + + size_of_parse_tree = (num_grammar_elements - num_method_elements) * + (u32)sizeof(union acpi_parse_object); + size_of_method_trees = + num_method_elements * (u32)sizeof(union acpi_parse_object); + size_of_node_entries = + num_nodes * (u32)sizeof(struct acpi_namespace_node); + size_of_acpi_objects = + num_nodes * (u32)sizeof(union acpi_operand_object); +#endif +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_count_namespace_objects + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Count and classify the entire namespace, including all + * namespace nodes and attached objects. + * + ******************************************************************************/ + +static void acpi_db_count_namespace_objects(void) +{ + u32 i; + + acpi_gbl_num_nodes = 0; + acpi_gbl_num_objects = 0; + + acpi_gbl_obj_type_count_misc = 0; + for (i = 0; i < (ACPI_TYPE_NS_NODE_MAX - 1); i++) { + acpi_gbl_obj_type_count[i] = 0; + acpi_gbl_node_type_count[i] = 0; + } + + (void)acpi_ns_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, FALSE, + acpi_db_classify_one_object, NULL, NULL, + NULL); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_display_statistics + * + * PARAMETERS: type_arg - Subcommand + * + * RETURN: Status + * + * DESCRIPTION: Display various statistics + * + ******************************************************************************/ + +acpi_status acpi_db_display_statistics(char *type_arg) +{ + u32 i; + u32 temp; + + acpi_ut_strupr(type_arg); + temp = acpi_db_match_argument(type_arg, acpi_db_stat_types); + if (temp == ACPI_TYPE_NOT_FOUND) { + acpi_os_printf("Invalid or unsupported argument\n"); + return (AE_OK); + } + + switch (temp) { + case CMD_STAT_ALLOCATIONS: + +#ifdef ACPI_DBG_TRACK_ALLOCATIONS + acpi_ut_dump_allocation_info(); +#endif + break; + + case CMD_STAT_TABLES: + + acpi_os_printf("ACPI Table Information (not implemented):\n\n"); + break; + + case CMD_STAT_OBJECTS: + + acpi_db_count_namespace_objects(); + + acpi_os_printf + ("\nObjects defined in the current namespace:\n\n"); + + acpi_os_printf("%16.16s %10.10s %10.10s\n", + "ACPI_TYPE", "NODES", "OBJECTS"); + + for (i = 0; i < ACPI_TYPE_NS_NODE_MAX; i++) { + acpi_os_printf("%16.16s % 10ld% 10ld\n", + acpi_ut_get_type_name(i), + acpi_gbl_node_type_count[i], + acpi_gbl_obj_type_count[i]); + } + acpi_os_printf("%16.16s % 10ld% 10ld\n", "Misc/Unknown", + acpi_gbl_node_type_count_misc, + acpi_gbl_obj_type_count_misc); + + acpi_os_printf("%16.16s % 10ld% 10ld\n", "TOTALS:", + acpi_gbl_num_nodes, acpi_gbl_num_objects); + break; + + case CMD_STAT_MEMORY: + +#ifdef ACPI_DBG_TRACK_ALLOCATIONS + acpi_os_printf + ("\n----Object Statistics (all in hex)---------\n"); + + acpi_db_list_info(acpi_gbl_global_list); + acpi_db_list_info(acpi_gbl_ns_node_list); +#endif + +#ifdef ACPI_USE_LOCAL_CACHE + acpi_os_printf + ("\n----Cache Statistics (all in hex)---------\n"); + acpi_db_list_info(acpi_gbl_operand_cache); + acpi_db_list_info(acpi_gbl_ps_node_cache); + acpi_db_list_info(acpi_gbl_ps_node_ext_cache); + acpi_db_list_info(acpi_gbl_state_cache); +#endif + + break; + + case CMD_STAT_MISC: + + acpi_os_printf("\nMiscellaneous Statistics:\n\n"); + acpi_os_printf("Calls to AcpiPsFind:.. ........% 7ld\n", + acpi_gbl_ps_find_count); + acpi_os_printf("Calls to AcpiNsLookup:..........% 7ld\n", + acpi_gbl_ns_lookup_count); + + acpi_os_printf("\n"); + + acpi_os_printf("Mutex usage:\n\n"); + for (i = 0; i < ACPI_NUM_MUTEX; i++) { + acpi_os_printf("%-28s: % 7ld\n", + acpi_ut_get_mutex_name(i), + acpi_gbl_mutex_info[i].use_count); + } + break; + + case CMD_STAT_SIZES: + + acpi_os_printf("\nInternal object sizes:\n\n"); + + acpi_os_printf("Common %3d\n", + sizeof(struct acpi_object_common)); + acpi_os_printf("Number %3d\n", + sizeof(struct acpi_object_integer)); + acpi_os_printf("String %3d\n", + sizeof(struct acpi_object_string)); + acpi_os_printf("Buffer %3d\n", + sizeof(struct acpi_object_buffer)); + acpi_os_printf("Package %3d\n", + sizeof(struct acpi_object_package)); + acpi_os_printf("BufferField %3d\n", + sizeof(struct acpi_object_buffer_field)); + acpi_os_printf("Device %3d\n", + sizeof(struct acpi_object_device)); + acpi_os_printf("Event %3d\n", + sizeof(struct acpi_object_event)); + acpi_os_printf("Method %3d\n", + sizeof(struct acpi_object_method)); + acpi_os_printf("Mutex %3d\n", + sizeof(struct acpi_object_mutex)); + acpi_os_printf("Region %3d\n", + sizeof(struct acpi_object_region)); + acpi_os_printf("PowerResource %3d\n", + sizeof(struct acpi_object_power_resource)); + acpi_os_printf("Processor %3d\n", + sizeof(struct acpi_object_processor)); + acpi_os_printf("ThermalZone %3d\n", + sizeof(struct acpi_object_thermal_zone)); + acpi_os_printf("RegionField %3d\n", + sizeof(struct acpi_object_region_field)); + acpi_os_printf("BankField %3d\n", + sizeof(struct acpi_object_bank_field)); + acpi_os_printf("IndexField %3d\n", + sizeof(struct acpi_object_index_field)); + acpi_os_printf("Reference %3d\n", + sizeof(struct acpi_object_reference)); + acpi_os_printf("Notify %3d\n", + sizeof(struct acpi_object_notify_handler)); + acpi_os_printf("AddressSpace %3d\n", + sizeof(struct acpi_object_addr_handler)); + acpi_os_printf("Extra %3d\n", + sizeof(struct acpi_object_extra)); + acpi_os_printf("Data %3d\n", + sizeof(struct acpi_object_data)); + + acpi_os_printf("\n"); + + acpi_os_printf("ParseObject %3d\n", + sizeof(struct acpi_parse_obj_common)); + acpi_os_printf("ParseObjectNamed %3d\n", + sizeof(struct acpi_parse_obj_named)); + acpi_os_printf("ParseObjectAsl %3d\n", + sizeof(struct acpi_parse_obj_asl)); + acpi_os_printf("OperandObject %3d\n", + sizeof(union acpi_operand_object)); + acpi_os_printf("NamespaceNode %3d\n", + sizeof(struct acpi_namespace_node)); + acpi_os_printf("AcpiObject %3d\n", + sizeof(union acpi_object)); + + acpi_os_printf("\n"); + + acpi_os_printf("Generic State %3d\n", + sizeof(union acpi_generic_state)); + acpi_os_printf("Common State %3d\n", + sizeof(struct acpi_common_state)); + acpi_os_printf("Control State %3d\n", + sizeof(struct acpi_control_state)); + acpi_os_printf("Update State %3d\n", + sizeof(struct acpi_update_state)); + acpi_os_printf("Scope State %3d\n", + sizeof(struct acpi_scope_state)); + acpi_os_printf("Parse Scope %3d\n", + sizeof(struct acpi_pscope_state)); + acpi_os_printf("Package State %3d\n", + sizeof(struct acpi_pkg_state)); + acpi_os_printf("Thread State %3d\n", + sizeof(struct acpi_thread_state)); + acpi_os_printf("Result Values %3d\n", + sizeof(struct acpi_result_values)); + acpi_os_printf("Notify Info %3d\n", + sizeof(struct acpi_notify_info)); + break; + + case CMD_STAT_STACK: +#if defined(ACPI_DEBUG_OUTPUT) + + temp = + (u32)ACPI_PTR_DIFF(acpi_gbl_entry_stack_pointer, + acpi_gbl_lowest_stack_pointer); + + acpi_os_printf("\nSubsystem Stack Usage:\n\n"); + acpi_os_printf("Entry Stack Pointer %p\n", + acpi_gbl_entry_stack_pointer); + acpi_os_printf("Lowest Stack Pointer %p\n", + acpi_gbl_lowest_stack_pointer); + acpi_os_printf("Stack Use %X (%u)\n", temp, + temp); + acpi_os_printf("Deepest Procedure Nesting %u\n", + acpi_gbl_deepest_nesting); +#endif + break; + + default: + + break; + } + + acpi_os_printf("\n"); + return (AE_OK); +} diff --git a/drivers/acpi/acpica/dbtest.c b/drivers/acpi/acpica/dbtest.c new file mode 100644 index 000000000000..10ea8bf9b810 --- /dev/null +++ b/drivers/acpi/acpica/dbtest.c @@ -0,0 +1,1057 @@ +/******************************************************************************* + * + * Module Name: dbtest - Various debug-related tests + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acdebug.h" +#include "acnamesp.h" +#include "acpredef.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbtest") + +/* Local prototypes */ +static void acpi_db_test_all_objects(void); + +static acpi_status +acpi_db_test_one_object(acpi_handle obj_handle, + u32 nesting_level, void *context, void **return_value); + +static acpi_status +acpi_db_test_integer_type(struct acpi_namespace_node *node, u32 bit_length); + +static acpi_status +acpi_db_test_buffer_type(struct acpi_namespace_node *node, u32 bit_length); + +static acpi_status +acpi_db_test_string_type(struct acpi_namespace_node *node, u32 byte_length); + +static acpi_status +acpi_db_read_from_object(struct acpi_namespace_node *node, + acpi_object_type expected_type, + union acpi_object **value); + +static acpi_status +acpi_db_write_to_object(struct acpi_namespace_node *node, + union acpi_object *value); + +static void acpi_db_evaluate_all_predefined_names(char *count_arg); + +static acpi_status +acpi_db_evaluate_one_predefined_name(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value); + +/* + * Test subcommands + */ +static struct acpi_db_argument_info acpi_db_test_types[] = { + {"OBJECTS"}, + {"PREDEFINED"}, + {NULL} /* Must be null terminated */ +}; + +#define CMD_TEST_OBJECTS 0 +#define CMD_TEST_PREDEFINED 1 + +#define BUFFER_FILL_VALUE 0xFF + +/* + * Support for the special debugger read/write control methods. + * These methods are installed into the current namespace and are + * used to read and write the various namespace objects. The point + * is to force the AML interpreter do all of the work. + */ +#define ACPI_DB_READ_METHOD "\\_T98" +#define ACPI_DB_WRITE_METHOD "\\_T99" + +static acpi_handle read_handle = NULL; +static acpi_handle write_handle = NULL; + +/* ASL Definitions of the debugger read/write control methods */ + +#if 0 +definition_block("ssdt.aml", "SSDT", 2, "Intel", "DEBUG", 0x00000001) +{ + method(_T98, 1, not_serialized) { /* Read */ + return (de_ref_of(arg0)) + } +} + +definition_block("ssdt2.aml", "SSDT", 2, "Intel", "DEBUG", 0x00000001) +{ + method(_T99, 2, not_serialized) { /* Write */ + store(arg1, arg0) + } +} +#endif + +static unsigned char read_method_code[] = { + 0x53, 0x53, 0x44, 0x54, 0x2E, 0x00, 0x00, 0x00, /* 00000000 "SSDT...." */ + 0x02, 0xC9, 0x49, 0x6E, 0x74, 0x65, 0x6C, 0x00, /* 00000008 "..Intel." */ + 0x44, 0x45, 0x42, 0x55, 0x47, 0x00, 0x00, 0x00, /* 00000010 "DEBUG..." */ + 0x01, 0x00, 0x00, 0x00, 0x49, 0x4E, 0x54, 0x4C, /* 00000018 "....INTL" */ + 0x18, 0x12, 0x13, 0x20, 0x14, 0x09, 0x5F, 0x54, /* 00000020 "... .._T" */ + 0x39, 0x38, 0x01, 0xA4, 0x83, 0x68 /* 00000028 "98...h" */ +}; + +static unsigned char write_method_code[] = { + 0x53, 0x53, 0x44, 0x54, 0x2E, 0x00, 0x00, 0x00, /* 00000000 "SSDT...." */ + 0x02, 0x15, 0x49, 0x6E, 0x74, 0x65, 0x6C, 0x00, /* 00000008 "..Intel." */ + 0x44, 0x45, 0x42, 0x55, 0x47, 0x00, 0x00, 0x00, /* 00000010 "DEBUG..." */ + 0x01, 0x00, 0x00, 0x00, 0x49, 0x4E, 0x54, 0x4C, /* 00000018 "....INTL" */ + 0x18, 0x12, 0x13, 0x20, 0x14, 0x09, 0x5F, 0x54, /* 00000020 "... .._T" */ + 0x39, 0x39, 0x02, 0x70, 0x69, 0x68 /* 00000028 "99.pih" */ +}; + +/******************************************************************************* + * + * FUNCTION: acpi_db_execute_test + * + * PARAMETERS: type_arg - Subcommand + * + * RETURN: None + * + * DESCRIPTION: Execute various debug tests. + * + * Note: Code is prepared for future expansion of the TEST command. + * + ******************************************************************************/ + +void acpi_db_execute_test(char *type_arg) +{ + u32 temp; + + acpi_ut_strupr(type_arg); + temp = acpi_db_match_argument(type_arg, acpi_db_test_types); + if (temp == ACPI_TYPE_NOT_FOUND) { + acpi_os_printf("Invalid or unsupported argument\n"); + return; + } + + switch (temp) { + case CMD_TEST_OBJECTS: + + acpi_db_test_all_objects(); + break; + + case CMD_TEST_PREDEFINED: + + acpi_db_evaluate_all_predefined_names(NULL); + break; + + default: + break; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_test_all_objects + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: This test implements the OBJECTS subcommand. It exercises the + * namespace by reading/writing/comparing all data objects such + * as integers, strings, buffers, fields, buffer fields, etc. + * + ******************************************************************************/ + +static void acpi_db_test_all_objects(void) +{ + acpi_status status; + + /* Install the debugger read-object control method if necessary */ + + if (!read_handle) { + status = acpi_install_method(read_method_code); + if (ACPI_FAILURE(status)) { + acpi_os_printf + ("%s, Could not install debugger read method\n", + acpi_format_exception(status)); + return; + } + + status = + acpi_get_handle(NULL, ACPI_DB_READ_METHOD, &read_handle); + if (ACPI_FAILURE(status)) { + acpi_os_printf + ("Could not obtain handle for debug method %s\n", + ACPI_DB_READ_METHOD); + return; + } + } + + /* Install the debugger write-object control method if necessary */ + + if (!write_handle) { + status = acpi_install_method(write_method_code); + if (ACPI_FAILURE(status)) { + acpi_os_printf + ("%s, Could not install debugger write method\n", + acpi_format_exception(status)); + return; + } + + status = + acpi_get_handle(NULL, ACPI_DB_WRITE_METHOD, &write_handle); + if (ACPI_FAILURE(status)) { + acpi_os_printf + ("Could not obtain handle for debug method %s\n", + ACPI_DB_WRITE_METHOD); + return; + } + } + + /* Walk the entire namespace, testing each supported named data object */ + + (void)acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, acpi_db_test_one_object, + NULL, NULL, NULL); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_test_one_object + * + * PARAMETERS: acpi_walk_callback + * + * RETURN: Status + * + * DESCRIPTION: Test one namespace object. Supported types are Integer, + * String, Buffer, buffer_field, and field_unit. All other object + * types are simply ignored. + * + * Note: Support for Packages is not implemented. + * + ******************************************************************************/ + +static acpi_status +acpi_db_test_one_object(acpi_handle obj_handle, + u32 nesting_level, void *context, void **return_value) +{ + struct acpi_namespace_node *node; + union acpi_operand_object *obj_desc; + union acpi_operand_object *region_obj; + acpi_object_type local_type; + u32 bit_length = 0; + u32 byte_length = 0; + acpi_status status = AE_OK; + + node = ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle); + obj_desc = node->object; + + /* + * For the supported types, get the actual bit length or + * byte length. Map the type to one of Integer/String/Buffer. + */ + switch (node->type) { + case ACPI_TYPE_INTEGER: + + /* Integer width is either 32 or 64 */ + + local_type = ACPI_TYPE_INTEGER; + bit_length = acpi_gbl_integer_bit_width; + break; + + case ACPI_TYPE_STRING: + + local_type = ACPI_TYPE_STRING; + byte_length = obj_desc->string.length; + break; + + case ACPI_TYPE_BUFFER: + + local_type = ACPI_TYPE_BUFFER; + byte_length = obj_desc->buffer.length; + bit_length = byte_length * 8; + break; + + case ACPI_TYPE_FIELD_UNIT: + case ACPI_TYPE_BUFFER_FIELD: + case ACPI_TYPE_LOCAL_REGION_FIELD: + case ACPI_TYPE_LOCAL_INDEX_FIELD: + case ACPI_TYPE_LOCAL_BANK_FIELD: + + local_type = ACPI_TYPE_INTEGER; + if (obj_desc) { + /* + * Returned object will be a Buffer if the field length + * is larger than the size of an Integer (32 or 64 bits + * depending on the DSDT version). + */ + bit_length = obj_desc->common_field.bit_length; + byte_length = ACPI_ROUND_BITS_UP_TO_BYTES(bit_length); + if (bit_length > acpi_gbl_integer_bit_width) { + local_type = ACPI_TYPE_BUFFER; + } + } + break; + + default: + + /* Ignore all other types */ + + return (AE_OK); + } + + /* Emit the common prefix: Type:Name */ + + acpi_os_printf("%14s: %4.4s", + acpi_ut_get_type_name(node->type), node->name.ascii); + if (!obj_desc) { + acpi_os_printf(" Ignoring, no attached object\n"); + return (AE_OK); + } + + /* + * Check for unsupported region types. Note: acpi_exec simulates + * access to system_memory, system_IO, PCI_Config, and EC. + */ + switch (node->type) { + case ACPI_TYPE_LOCAL_REGION_FIELD: + + region_obj = obj_desc->field.region_obj; + switch (region_obj->region.space_id) { + case ACPI_ADR_SPACE_SYSTEM_MEMORY: + case ACPI_ADR_SPACE_SYSTEM_IO: + case ACPI_ADR_SPACE_PCI_CONFIG: + case ACPI_ADR_SPACE_EC: + + break; + + default: + + acpi_os_printf + (" %s space is not supported [%4.4s]\n", + acpi_ut_get_region_name(region_obj->region. + space_id), + region_obj->region.node->name.ascii); + return (AE_OK); + } + break; + + default: + break; + } + + /* At this point, we have resolved the object to one of the major types */ + + switch (local_type) { + case ACPI_TYPE_INTEGER: + + status = acpi_db_test_integer_type(node, bit_length); + break; + + case ACPI_TYPE_STRING: + + status = acpi_db_test_string_type(node, byte_length); + break; + + case ACPI_TYPE_BUFFER: + + status = acpi_db_test_buffer_type(node, bit_length); + break; + + default: + + acpi_os_printf(" Ignoring, type not implemented (%2.2X)", + local_type); + break; + } + + switch (node->type) { + case ACPI_TYPE_LOCAL_REGION_FIELD: + + region_obj = obj_desc->field.region_obj; + acpi_os_printf(" (%s)", + acpi_ut_get_region_name(region_obj->region. + space_id)); + break; + + default: + break; + } + + acpi_os_printf("\n"); + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_test_integer_type + * + * PARAMETERS: node - Parent NS node for the object + * bit_length - Actual length of the object. Used for + * support of arbitrary length field_unit + * and buffer_field objects. + * + * RETURN: Status + * + * DESCRIPTION: Test read/write for an Integer-valued object. Performs a + * write/read/compare of an arbitrary new value, then performs + * a write/read/compare of the original value. + * + ******************************************************************************/ + +static acpi_status +acpi_db_test_integer_type(struct acpi_namespace_node *node, u32 bit_length) +{ + union acpi_object *temp1 = NULL; + union acpi_object *temp2 = NULL; + union acpi_object *temp3 = NULL; + union acpi_object write_value; + u64 value_to_write; + acpi_status status; + + if (bit_length > 64) { + acpi_os_printf(" Invalid length for an Integer: %u", + bit_length); + return (AE_OK); + } + + /* Read the original value */ + + status = acpi_db_read_from_object(node, ACPI_TYPE_INTEGER, &temp1); + if (ACPI_FAILURE(status)) { + return (status); + } + + acpi_os_printf(" (%4.4X/%3.3X) %8.8X%8.8X", + bit_length, ACPI_ROUND_BITS_UP_TO_BYTES(bit_length), + ACPI_FORMAT_UINT64(temp1->integer.value)); + + value_to_write = ACPI_UINT64_MAX >> (64 - bit_length); + if (temp1->integer.value == value_to_write) { + value_to_write = 0; + } + + /* Write a new value */ + + write_value.type = ACPI_TYPE_INTEGER; + write_value.integer.value = value_to_write; + status = acpi_db_write_to_object(node, &write_value); + if (ACPI_FAILURE(status)) { + goto exit; + } + + /* Ensure that we can read back the new value */ + + status = acpi_db_read_from_object(node, ACPI_TYPE_INTEGER, &temp2); + if (ACPI_FAILURE(status)) { + goto exit; + } + + if (temp2->integer.value != value_to_write) { + acpi_os_printf(" MISMATCH 2: %8.8X%8.8X, expecting %8.8X%8.8X", + ACPI_FORMAT_UINT64(temp2->integer.value), + ACPI_FORMAT_UINT64(value_to_write)); + } + + /* Write back the original value */ + + write_value.integer.value = temp1->integer.value; + status = acpi_db_write_to_object(node, &write_value); + if (ACPI_FAILURE(status)) { + goto exit; + } + + /* Ensure that we can read back the original value */ + + status = acpi_db_read_from_object(node, ACPI_TYPE_INTEGER, &temp3); + if (ACPI_FAILURE(status)) { + goto exit; + } + + if (temp3->integer.value != temp1->integer.value) { + acpi_os_printf(" MISMATCH 3: %8.8X%8.8X, expecting %8.8X%8.8X", + ACPI_FORMAT_UINT64(temp3->integer.value), + ACPI_FORMAT_UINT64(temp1->integer.value)); + } + +exit: + if (temp1) { + acpi_os_free(temp1); + } + if (temp2) { + acpi_os_free(temp2); + } + if (temp3) { + acpi_os_free(temp3); + } + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_test_buffer_type + * + * PARAMETERS: node - Parent NS node for the object + * bit_length - Actual length of the object. + * + * RETURN: Status + * + * DESCRIPTION: Test read/write for an Buffer-valued object. Performs a + * write/read/compare of an arbitrary new value, then performs + * a write/read/compare of the original value. + * + ******************************************************************************/ + +static acpi_status +acpi_db_test_buffer_type(struct acpi_namespace_node *node, u32 bit_length) +{ + union acpi_object *temp1 = NULL; + union acpi_object *temp2 = NULL; + union acpi_object *temp3 = NULL; + u8 *buffer; + union acpi_object write_value; + acpi_status status; + u32 byte_length; + u32 i; + u8 extra_bits; + + byte_length = ACPI_ROUND_BITS_UP_TO_BYTES(bit_length); + if (byte_length == 0) { + acpi_os_printf(" Ignoring zero length buffer"); + return (AE_OK); + } + + /* Allocate a local buffer */ + + buffer = ACPI_ALLOCATE_ZEROED(byte_length); + if (!buffer) { + return (AE_NO_MEMORY); + } + + /* Read the original value */ + + status = acpi_db_read_from_object(node, ACPI_TYPE_BUFFER, &temp1); + if (ACPI_FAILURE(status)) { + goto exit; + } + + /* Emit a few bytes of the buffer */ + + acpi_os_printf(" (%4.4X/%3.3X)", bit_length, temp1->buffer.length); + for (i = 0; ((i < 4) && (i < byte_length)); i++) { + acpi_os_printf(" %2.2X", temp1->buffer.pointer[i]); + } + acpi_os_printf("... "); + + /* + * Write a new value. + * + * Handle possible extra bits at the end of the buffer. Can + * happen for field_units larger than an integer, but the bit + * count is not an integral number of bytes. Zero out the + * unused bits. + */ + memset(buffer, BUFFER_FILL_VALUE, byte_length); + extra_bits = bit_length % 8; + if (extra_bits) { + buffer[byte_length - 1] = ACPI_MASK_BITS_ABOVE(extra_bits); + } + + write_value.type = ACPI_TYPE_BUFFER; + write_value.buffer.length = byte_length; + write_value.buffer.pointer = buffer; + + status = acpi_db_write_to_object(node, &write_value); + if (ACPI_FAILURE(status)) { + goto exit; + } + + /* Ensure that we can read back the new value */ + + status = acpi_db_read_from_object(node, ACPI_TYPE_BUFFER, &temp2); + if (ACPI_FAILURE(status)) { + goto exit; + } + + if (memcmp(temp2->buffer.pointer, buffer, byte_length)) { + acpi_os_printf(" MISMATCH 2: New buffer value"); + } + + /* Write back the original value */ + + write_value.buffer.length = byte_length; + write_value.buffer.pointer = temp1->buffer.pointer; + + status = acpi_db_write_to_object(node, &write_value); + if (ACPI_FAILURE(status)) { + goto exit; + } + + /* Ensure that we can read back the original value */ + + status = acpi_db_read_from_object(node, ACPI_TYPE_BUFFER, &temp3); + if (ACPI_FAILURE(status)) { + goto exit; + } + + if (memcmp(temp1->buffer.pointer, temp3->buffer.pointer, byte_length)) { + acpi_os_printf(" MISMATCH 3: While restoring original buffer"); + } + +exit: + ACPI_FREE(buffer); + if (temp1) { + acpi_os_free(temp1); + } + if (temp2) { + acpi_os_free(temp2); + } + if (temp3) { + acpi_os_free(temp3); + } + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_test_string_type + * + * PARAMETERS: node - Parent NS node for the object + * byte_length - Actual length of the object. + * + * RETURN: Status + * + * DESCRIPTION: Test read/write for an String-valued object. Performs a + * write/read/compare of an arbitrary new value, then performs + * a write/read/compare of the original value. + * + ******************************************************************************/ + +static acpi_status +acpi_db_test_string_type(struct acpi_namespace_node *node, u32 byte_length) +{ + union acpi_object *temp1 = NULL; + union acpi_object *temp2 = NULL; + union acpi_object *temp3 = NULL; + char *value_to_write = "Test String from AML Debugger"; + union acpi_object write_value; + acpi_status status; + + /* Read the original value */ + + status = acpi_db_read_from_object(node, ACPI_TYPE_STRING, &temp1); + if (ACPI_FAILURE(status)) { + return (status); + } + + acpi_os_printf(" (%4.4X/%3.3X) \"%s\"", (temp1->string.length * 8), + temp1->string.length, temp1->string.pointer); + + /* Write a new value */ + + write_value.type = ACPI_TYPE_STRING; + write_value.string.length = strlen(value_to_write); + write_value.string.pointer = value_to_write; + + status = acpi_db_write_to_object(node, &write_value); + if (ACPI_FAILURE(status)) { + goto exit; + } + + /* Ensure that we can read back the new value */ + + status = acpi_db_read_from_object(node, ACPI_TYPE_STRING, &temp2); + if (ACPI_FAILURE(status)) { + goto exit; + } + + if (strcmp(temp2->string.pointer, value_to_write)) { + acpi_os_printf(" MISMATCH 2: %s, expecting %s", + temp2->string.pointer, value_to_write); + } + + /* Write back the original value */ + + write_value.string.length = strlen(temp1->string.pointer); + write_value.string.pointer = temp1->string.pointer; + + status = acpi_db_write_to_object(node, &write_value); + if (ACPI_FAILURE(status)) { + goto exit; + } + + /* Ensure that we can read back the original value */ + + status = acpi_db_read_from_object(node, ACPI_TYPE_STRING, &temp3); + if (ACPI_FAILURE(status)) { + goto exit; + } + + if (strcmp(temp1->string.pointer, temp3->string.pointer)) { + acpi_os_printf(" MISMATCH 3: %s, expecting %s", + temp3->string.pointer, temp1->string.pointer); + } + +exit: + if (temp1) { + acpi_os_free(temp1); + } + if (temp2) { + acpi_os_free(temp2); + } + if (temp3) { + acpi_os_free(temp3); + } + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_read_from_object + * + * PARAMETERS: node - Parent NS node for the object + * expected_type - Object type expected from the read + * value - Where the value read is returned + * + * RETURN: Status + * + * DESCRIPTION: Performs a read from the specified object by invoking the + * special debugger control method that reads the object. Thus, + * the AML interpreter is doing all of the work, increasing the + * validity of the test. + * + ******************************************************************************/ + +static acpi_status +acpi_db_read_from_object(struct acpi_namespace_node *node, + acpi_object_type expected_type, + union acpi_object **value) +{ + union acpi_object *ret_value; + struct acpi_object_list param_objects; + union acpi_object params[2]; + struct acpi_buffer return_obj; + acpi_status status; + + params[0].type = ACPI_TYPE_LOCAL_REFERENCE; + params[0].reference.actual_type = node->type; + params[0].reference.handle = ACPI_CAST_PTR(acpi_handle, node); + + param_objects.count = 1; + param_objects.pointer = params; + + return_obj.length = ACPI_ALLOCATE_BUFFER; + + acpi_gbl_method_executing = TRUE; + status = acpi_evaluate_object(read_handle, NULL, + ¶m_objects, &return_obj); + acpi_gbl_method_executing = FALSE; + + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not read from object, %s", + acpi_format_exception(status)); + return (status); + } + + ret_value = (union acpi_object *)return_obj.pointer; + + switch (ret_value->type) { + case ACPI_TYPE_INTEGER: + case ACPI_TYPE_BUFFER: + case ACPI_TYPE_STRING: + /* + * Did we receive the type we wanted? Most important for the + * Integer/Buffer case (when a field is larger than an Integer, + * it should return a Buffer). + */ + if (ret_value->type != expected_type) { + acpi_os_printf + (" Type mismatch: Expected %s, Received %s", + acpi_ut_get_type_name(expected_type), + acpi_ut_get_type_name(ret_value->type)); + + return (AE_TYPE); + } + + *value = ret_value; + break; + + default: + + acpi_os_printf(" Unsupported return object type, %s", + acpi_ut_get_type_name(ret_value->type)); + + acpi_os_free(return_obj.pointer); + return (AE_TYPE); + } + + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_write_to_object + * + * PARAMETERS: node - Parent NS node for the object + * value - Value to be written + * + * RETURN: Status + * + * DESCRIPTION: Performs a write to the specified object by invoking the + * special debugger control method that writes the object. Thus, + * the AML interpreter is doing all of the work, increasing the + * validity of the test. + * + ******************************************************************************/ + +static acpi_status +acpi_db_write_to_object(struct acpi_namespace_node *node, + union acpi_object *value) +{ + struct acpi_object_list param_objects; + union acpi_object params[2]; + acpi_status status; + + params[0].type = ACPI_TYPE_LOCAL_REFERENCE; + params[0].reference.actual_type = node->type; + params[0].reference.handle = ACPI_CAST_PTR(acpi_handle, node); + + /* Copy the incoming user parameter */ + + memcpy(¶ms[1], value, sizeof(union acpi_object)); + + param_objects.count = 2; + param_objects.pointer = params; + + acpi_gbl_method_executing = TRUE; + status = acpi_evaluate_object(write_handle, NULL, ¶m_objects, NULL); + acpi_gbl_method_executing = FALSE; + + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not write to object, %s", + acpi_format_exception(status)); + } + + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_evaluate_all_predefined_names + * + * PARAMETERS: count_arg - Max number of methods to execute + * + * RETURN: None + * + * DESCRIPTION: Namespace batch execution. Execute predefined names in the + * namespace, up to the max count, if specified. + * + ******************************************************************************/ + +static void acpi_db_evaluate_all_predefined_names(char *count_arg) +{ + struct acpi_db_execute_walk info; + + info.count = 0; + info.max_count = ACPI_UINT32_MAX; + + if (count_arg) { + info.max_count = strtoul(count_arg, NULL, 0); + } + + /* Search all nodes in namespace */ + + (void)acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, + acpi_db_evaluate_one_predefined_name, NULL, + (void *)&info, NULL); + + acpi_os_printf("Evaluated %u predefined names in the namespace\n", + info.count); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_evaluate_one_predefined_name + * + * PARAMETERS: Callback from walk_namespace + * + * RETURN: Status + * + * DESCRIPTION: Batch execution module. Currently only executes predefined + * ACPI names. + * + ******************************************************************************/ + +static acpi_status +acpi_db_evaluate_one_predefined_name(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value) +{ + struct acpi_namespace_node *node = + (struct acpi_namespace_node *)obj_handle; + struct acpi_db_execute_walk *info = + (struct acpi_db_execute_walk *)context; + char *pathname; + const union acpi_predefined_info *predefined; + struct acpi_device_info *obj_info; + struct acpi_object_list param_objects; + union acpi_object params[ACPI_METHOD_NUM_ARGS]; + union acpi_object *this_param; + struct acpi_buffer return_obj; + acpi_status status; + u16 arg_type_list; + u8 arg_count; + u8 arg_type; + u32 i; + + /* The name must be a predefined ACPI name */ + + predefined = acpi_ut_match_predefined_method(node->name.ascii); + if (!predefined) { + return (AE_OK); + } + + if (node->type == ACPI_TYPE_LOCAL_SCOPE) { + return (AE_OK); + } + + pathname = acpi_ns_get_external_pathname(node); + if (!pathname) { + return (AE_OK); + } + + /* Get the object info for number of method parameters */ + + status = acpi_get_object_info(obj_handle, &obj_info); + if (ACPI_FAILURE(status)) { + ACPI_FREE(pathname); + return (status); + } + + param_objects.count = 0; + param_objects.pointer = NULL; + + if (obj_info->type == ACPI_TYPE_METHOD) { + + /* Setup default parameters (with proper types) */ + + arg_type_list = predefined->info.argument_list; + arg_count = METHOD_GET_ARG_COUNT(arg_type_list); + + /* + * Setup the ACPI-required number of arguments, regardless of what + * the actual method defines. If there is a difference, then the + * method is wrong and a warning will be issued during execution. + */ + this_param = params; + for (i = 0; i < arg_count; i++) { + arg_type = METHOD_GET_NEXT_TYPE(arg_type_list); + this_param->type = arg_type; + + switch (arg_type) { + case ACPI_TYPE_INTEGER: + + this_param->integer.value = 1; + break; + + case ACPI_TYPE_STRING: + + this_param->string.pointer = + "This is the default argument string"; + this_param->string.length = + strlen(this_param->string.pointer); + break; + + case ACPI_TYPE_BUFFER: + + this_param->buffer.pointer = (u8 *)params; /* just a garbage buffer */ + this_param->buffer.length = 48; + break; + + case ACPI_TYPE_PACKAGE: + + this_param->package.elements = NULL; + this_param->package.count = 0; + break; + + default: + + acpi_os_printf + ("%s: Unsupported argument type: %u\n", + pathname, arg_type); + break; + } + + this_param++; + } + + param_objects.count = arg_count; + param_objects.pointer = params; + } + + ACPI_FREE(obj_info); + return_obj.pointer = NULL; + return_obj.length = ACPI_ALLOCATE_BUFFER; + + /* Do the actual method execution */ + + acpi_gbl_method_executing = TRUE; + + status = acpi_evaluate_object(node, NULL, ¶m_objects, &return_obj); + + acpi_os_printf("%-32s returned %s\n", + pathname, acpi_format_exception(status)); + acpi_gbl_method_executing = FALSE; + ACPI_FREE(pathname); + + /* Ignore status from method execution */ + + status = AE_OK; + + /* Update count, check if we have executed enough methods */ + + info->count++; + if (info->count >= info->max_count) { + status = AE_CTRL_TERMINATE; + } + + return (status); +} diff --git a/drivers/acpi/acpica/dbutils.c b/drivers/acpi/acpica/dbutils.c new file mode 100644 index 000000000000..86790e080139 --- /dev/null +++ b/drivers/acpi/acpica/dbutils.c @@ -0,0 +1,457 @@ +/******************************************************************************* + * + * Module Name: dbutils - AML debugger utilities + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acnamesp.h" +#include "acdebug.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbutils") + +/* Local prototypes */ +#ifdef ACPI_OBSOLETE_FUNCTIONS +acpi_status acpi_db_second_pass_parse(union acpi_parse_object *root); + +void acpi_db_dump_buffer(u32 address); +#endif + +static char *gbl_hex_to_ascii = "0123456789ABCDEF"; + +/******************************************************************************* + * + * FUNCTION: acpi_db_match_argument + * + * PARAMETERS: user_argument - User command line + * arguments - Array of commands to match against + * + * RETURN: Index into command array or ACPI_TYPE_NOT_FOUND if not found + * + * DESCRIPTION: Search command array for a command match + * + ******************************************************************************/ + +acpi_object_type +acpi_db_match_argument(char *user_argument, + struct acpi_db_argument_info *arguments) +{ + u32 i; + + if (!user_argument || user_argument[0] == 0) { + return (ACPI_TYPE_NOT_FOUND); + } + + for (i = 0; arguments[i].name; i++) { + if (strstr(arguments[i].name, user_argument) == + arguments[i].name) { + return (i); + } + } + + /* Argument not recognized */ + + return (ACPI_TYPE_NOT_FOUND); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_set_output_destination + * + * PARAMETERS: output_flags - Current flags word + * + * RETURN: None + * + * DESCRIPTION: Set the current destination for debugger output. Also sets + * the debug output level accordingly. + * + ******************************************************************************/ + +void acpi_db_set_output_destination(u32 output_flags) +{ + + acpi_gbl_db_output_flags = (u8)output_flags; + + if ((output_flags & ACPI_DB_REDIRECTABLE_OUTPUT) && + acpi_gbl_db_output_to_file) { + acpi_dbg_level = acpi_gbl_db_debug_level; + } else { + acpi_dbg_level = acpi_gbl_db_console_debug_level; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_dump_external_object + * + * PARAMETERS: obj_desc - External ACPI object to dump + * level - Nesting level. + * + * RETURN: None + * + * DESCRIPTION: Dump the contents of an ACPI external object + * + ******************************************************************************/ + +void acpi_db_dump_external_object(union acpi_object *obj_desc, u32 level) +{ + u32 i; + + if (!obj_desc) { + acpi_os_printf("[Null Object]\n"); + return; + } + + for (i = 0; i < level; i++) { + acpi_os_printf(" "); + } + + switch (obj_desc->type) { + case ACPI_TYPE_ANY: + + acpi_os_printf("[Null Object] (Type=0)\n"); + break; + + case ACPI_TYPE_INTEGER: + + acpi_os_printf("[Integer] = %8.8X%8.8X\n", + ACPI_FORMAT_UINT64(obj_desc->integer.value)); + break; + + case ACPI_TYPE_STRING: + + acpi_os_printf("[String] Length %.2X = ", + obj_desc->string.length); + acpi_ut_print_string(obj_desc->string.pointer, ACPI_UINT8_MAX); + acpi_os_printf("\n"); + break; + + case ACPI_TYPE_BUFFER: + + acpi_os_printf("[Buffer] Length %.2X = ", + obj_desc->buffer.length); + if (obj_desc->buffer.length) { + if (obj_desc->buffer.length > 16) { + acpi_os_printf("\n"); + } + acpi_ut_debug_dump_buffer(ACPI_CAST_PTR + (u8, + obj_desc->buffer.pointer), + obj_desc->buffer.length, + DB_BYTE_DISPLAY, _COMPONENT); + } else { + acpi_os_printf("\n"); + } + break; + + case ACPI_TYPE_PACKAGE: + + acpi_os_printf("[Package] Contains %u Elements:\n", + obj_desc->package.count); + + for (i = 0; i < obj_desc->package.count; i++) { + acpi_db_dump_external_object(&obj_desc->package. + elements[i], level + 1); + } + break; + + case ACPI_TYPE_LOCAL_REFERENCE: + + acpi_os_printf("[Object Reference] = "); + acpi_db_display_internal_object(obj_desc->reference.handle, + NULL); + break; + + case ACPI_TYPE_PROCESSOR: + + acpi_os_printf("[Processor]\n"); + break; + + case ACPI_TYPE_POWER: + + acpi_os_printf("[Power Resource]\n"); + break; + + default: + + acpi_os_printf("[Unknown Type] %X\n", obj_desc->type); + break; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_prep_namestring + * + * PARAMETERS: name - String to prepare + * + * RETURN: None + * + * DESCRIPTION: Translate all forward slashes and dots to backslashes. + * + ******************************************************************************/ + +void acpi_db_prep_namestring(char *name) +{ + + if (!name) { + return; + } + + acpi_ut_strupr(name); + + /* Convert a leading forward slash to a backslash */ + + if (*name == '/') { + *name = '\\'; + } + + /* Ignore a leading backslash, this is the root prefix */ + + if (ACPI_IS_ROOT_PREFIX(*name)) { + name++; + } + + /* Convert all slash path separators to dots */ + + while (*name) { + if ((*name == '/') || (*name == '\\')) { + *name = '.'; + } + + name++; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_local_ns_lookup + * + * PARAMETERS: name - Name to lookup + * + * RETURN: Pointer to a namespace node, null on failure + * + * DESCRIPTION: Lookup a name in the ACPI namespace + * + * Note: Currently begins search from the root. Could be enhanced to use + * the current prefix (scope) node as the search beginning point. + * + ******************************************************************************/ + +struct acpi_namespace_node *acpi_db_local_ns_lookup(char *name) +{ + char *internal_path; + acpi_status status; + struct acpi_namespace_node *node = NULL; + + acpi_db_prep_namestring(name); + + /* Build an internal namestring */ + + status = acpi_ns_internalize_name(name, &internal_path); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Invalid namestring: %s\n", name); + return (NULL); + } + + /* + * Lookup the name. + * (Uses root node as the search starting point) + */ + status = acpi_ns_lookup(NULL, internal_path, ACPI_TYPE_ANY, + ACPI_IMODE_EXECUTE, + ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE, + NULL, &node); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not locate name: %s, %s\n", + name, acpi_format_exception(status)); + } + + ACPI_FREE(internal_path); + return (node); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_uint32_to_hex_string + * + * PARAMETERS: value - The value to be converted to string + * buffer - Buffer for result (not less than 11 bytes) + * + * RETURN: None + * + * DESCRIPTION: Convert the unsigned 32-bit value to the hexadecimal image + * + * NOTE: It is the caller's responsibility to ensure that the length of buffer + * is sufficient. + * + ******************************************************************************/ + +void acpi_db_uint32_to_hex_string(u32 value, char *buffer) +{ + int i; + + if (value == 0) { + strcpy(buffer, "0"); + return; + } + + buffer[8] = '\0'; + + for (i = 7; i >= 0; i--) { + buffer[i] = gbl_hex_to_ascii[value & 0x0F]; + value = value >> 4; + } +} + +#ifdef ACPI_OBSOLETE_FUNCTIONS +/******************************************************************************* + * + * FUNCTION: acpi_db_second_pass_parse + * + * PARAMETERS: root - Root of the parse tree + * + * RETURN: Status + * + * DESCRIPTION: Second pass parse of the ACPI tables. We need to wait until + * second pass to parse the control methods + * + ******************************************************************************/ + +acpi_status acpi_db_second_pass_parse(union acpi_parse_object *root) +{ + union acpi_parse_object *op = root; + union acpi_parse_object *method; + union acpi_parse_object *search_op; + union acpi_parse_object *start_op; + acpi_status status = AE_OK; + u32 base_aml_offset; + struct acpi_walk_state *walk_state; + + ACPI_FUNCTION_ENTRY(); + + acpi_os_printf("Pass two parse ....\n"); + + while (op) { + if (op->common.aml_opcode == AML_METHOD_OP) { + method = op; + + /* Create a new walk state for the parse */ + + walk_state = + acpi_ds_create_walk_state(0, NULL, NULL, NULL); + if (!walk_state) { + return (AE_NO_MEMORY); + } + + /* Init the Walk State */ + + walk_state->parser_state.aml = + walk_state->parser_state.aml_start = + method->named.data; + walk_state->parser_state.aml_end = + walk_state->parser_state.pkg_end = + method->named.data + method->named.length; + walk_state->parser_state.start_scope = op; + + walk_state->descending_callback = + acpi_ds_load1_begin_op; + walk_state->ascending_callback = acpi_ds_load1_end_op; + + /* Perform the AML parse */ + + status = acpi_ps_parse_aml(walk_state); + + base_aml_offset = + (method->common.value.arg)->common.aml_offset + 1; + start_op = (method->common.value.arg)->common.next; + search_op = start_op; + + while (search_op) { + search_op->common.aml_offset += base_aml_offset; + search_op = + acpi_ps_get_depth_next(start_op, search_op); + } + } + + if (op->common.aml_opcode == AML_REGION_OP) { + + /* TBD: [Investigate] this isn't quite the right thing to do! */ + /* + * + * Method = (ACPI_DEFERRED_OP *) Op; + * Status = acpi_ps_parse_aml (Op, Method->Body, Method->body_length); + */ + } + + if (ACPI_FAILURE(status)) { + break; + } + + op = acpi_ps_get_depth_next(root, op); + } + + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_dump_buffer + * + * PARAMETERS: address - Pointer to the buffer + * + * RETURN: None + * + * DESCRIPTION: Print a portion of a buffer + * + ******************************************************************************/ + +void acpi_db_dump_buffer(u32 address) +{ + + acpi_os_printf("\nLocation %X:\n", address); + + acpi_dbg_level |= ACPI_LV_TABLES; + acpi_ut_debug_dump_buffer(ACPI_TO_POINTER(address), 64, DB_BYTE_DISPLAY, + ACPI_UINT32_MAX); +} +#endif diff --git a/drivers/acpi/acpica/dbxface.c b/drivers/acpi/acpica/dbxface.c new file mode 100644 index 000000000000..26023bd95f56 --- /dev/null +++ b/drivers/acpi/acpica/dbxface.c @@ -0,0 +1,467 @@ +/******************************************************************************* + * + * Module Name: dbxface - AML Debugger external interfaces + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "amlcode.h" +#include "acdebug.h" + +#define _COMPONENT ACPI_CA_DEBUGGER +ACPI_MODULE_NAME("dbxface") + +/* Local prototypes */ +static acpi_status +acpi_db_start_command(struct acpi_walk_state *walk_state, + union acpi_parse_object *op); + +#ifdef ACPI_OBSOLETE_FUNCTIONS +void acpi_db_method_end(struct acpi_walk_state *walk_state); +#endif + +/******************************************************************************* + * + * FUNCTION: acpi_db_start_command + * + * PARAMETERS: walk_state - Current walk + * op - Current executing Op, from AML interpreter + * + * RETURN: Status + * + * DESCRIPTION: Enter debugger command loop + * + ******************************************************************************/ + +static acpi_status +acpi_db_start_command(struct acpi_walk_state *walk_state, + union acpi_parse_object *op) +{ + acpi_status status; + + /* TBD: [Investigate] are there namespace locking issues here? */ + + /* acpi_ut_release_mutex (ACPI_MTX_NAMESPACE); */ + + /* Go into the command loop and await next user command */ + + acpi_gbl_method_executing = TRUE; + status = AE_CTRL_TRUE; + while (status == AE_CTRL_TRUE) { + if (acpi_gbl_debugger_configuration == DEBUGGER_MULTI_THREADED) { + + /* Handshake with the front-end that gets user command lines */ + + acpi_os_release_mutex(acpi_gbl_db_command_complete); + + status = + acpi_os_acquire_mutex(acpi_gbl_db_command_ready, + ACPI_WAIT_FOREVER); + if (ACPI_FAILURE(status)) { + return (status); + } + } else { + /* Single threaded, we must get a command line ourselves */ + + /* Force output to console until a command is entered */ + + acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT); + + /* Different prompt if method is executing */ + + if (!acpi_gbl_method_executing) { + acpi_os_printf("%1c ", + ACPI_DEBUGGER_COMMAND_PROMPT); + } else { + acpi_os_printf("%1c ", + ACPI_DEBUGGER_EXECUTE_PROMPT); + } + + /* Get the user input line */ + + status = acpi_os_get_line(acpi_gbl_db_line_buf, + ACPI_DB_LINE_BUFFER_SIZE, + NULL); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "While parsing command line")); + return (status); + } + } + + status = + acpi_db_command_dispatch(acpi_gbl_db_line_buf, walk_state, + op); + } + + /* acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE); */ + + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_db_single_step + * + * PARAMETERS: walk_state - Current walk + * op - Current executing op (from aml interpreter) + * opcode_class - Class of the current AML Opcode + * + * RETURN: Status + * + * DESCRIPTION: Called just before execution of an AML opcode. + * + ******************************************************************************/ + +acpi_status +acpi_db_single_step(struct acpi_walk_state * walk_state, + union acpi_parse_object * op, u32 opcode_class) +{ + union acpi_parse_object *next; + acpi_status status = AE_OK; + u32 original_debug_level; + union acpi_parse_object *display_op; + union acpi_parse_object *parent_op; + u32 aml_offset; + + ACPI_FUNCTION_ENTRY(); + + /* Check the abort flag */ + + if (acpi_gbl_abort_method) { + acpi_gbl_abort_method = FALSE; + return (AE_ABORT_METHOD); + } + + aml_offset = (u32)ACPI_PTR_DIFF(op->common.aml, + walk_state->parser_state.aml_start); + + /* Check for single-step breakpoint */ + + if (walk_state->method_breakpoint && + (walk_state->method_breakpoint <= aml_offset)) { + + /* Check if the breakpoint has been reached or passed */ + /* Hit the breakpoint, resume single step, reset breakpoint */ + + acpi_os_printf("***Break*** at AML offset %X\n", aml_offset); + acpi_gbl_cm_single_step = TRUE; + acpi_gbl_step_to_next_call = FALSE; + walk_state->method_breakpoint = 0; + } + + /* Check for user breakpoint (Must be on exact Aml offset) */ + + else if (walk_state->user_breakpoint && + (walk_state->user_breakpoint == aml_offset)) { + acpi_os_printf("***UserBreakpoint*** at AML offset %X\n", + aml_offset); + acpi_gbl_cm_single_step = TRUE; + acpi_gbl_step_to_next_call = FALSE; + walk_state->method_breakpoint = 0; + } + + /* + * Check if this is an opcode that we are interested in -- + * namely, opcodes that have arguments + */ + if (op->common.aml_opcode == AML_INT_NAMEDFIELD_OP) { + return (AE_OK); + } + + switch (opcode_class) { + case AML_CLASS_UNKNOWN: + case AML_CLASS_ARGUMENT: /* constants, literals, etc. do nothing */ + + return (AE_OK); + + default: + + /* All other opcodes -- continue */ + break; + } + + /* + * Under certain debug conditions, display this opcode and its operands + */ + if ((acpi_gbl_db_output_to_file) || + (acpi_gbl_cm_single_step) || (acpi_dbg_level & ACPI_LV_PARSE)) { + if ((acpi_gbl_db_output_to_file) || + (acpi_dbg_level & ACPI_LV_PARSE)) { + acpi_os_printf + ("\n[AmlDebug] Next AML Opcode to execute:\n"); + } + + /* + * Display this op (and only this op - zero out the NEXT field + * temporarily, and disable parser trace output for the duration of + * the display because we don't want the extraneous debug output) + */ + original_debug_level = acpi_dbg_level; + acpi_dbg_level &= ~(ACPI_LV_PARSE | ACPI_LV_FUNCTIONS); + next = op->common.next; + op->common.next = NULL; + + display_op = op; + parent_op = op->common.parent; + if (parent_op) { + if ((walk_state->control_state) && + (walk_state->control_state->common.state == + ACPI_CONTROL_PREDICATE_EXECUTING)) { + /* + * We are executing the predicate of an IF or WHILE statement + * Search upwards for the containing IF or WHILE so that the + * entire predicate can be displayed. + */ + while (parent_op) { + if ((parent_op->common.aml_opcode == + AML_IF_OP) + || (parent_op->common.aml_opcode == + AML_WHILE_OP)) { + display_op = parent_op; + break; + } + parent_op = parent_op->common.parent; + } + } else { + while (parent_op) { + if ((parent_op->common.aml_opcode == + AML_IF_OP) + || (parent_op->common.aml_opcode == + AML_ELSE_OP) + || (parent_op->common.aml_opcode == + AML_SCOPE_OP) + || (parent_op->common.aml_opcode == + AML_METHOD_OP) + || (parent_op->common.aml_opcode == + AML_WHILE_OP)) { + break; + } + display_op = parent_op; + parent_op = parent_op->common.parent; + } + } + } + + /* Now we can display it */ + +#ifdef ACPI_DISASSEMBLER + acpi_dm_disassemble(walk_state, display_op, ACPI_UINT32_MAX); +#endif + + if ((op->common.aml_opcode == AML_IF_OP) || + (op->common.aml_opcode == AML_WHILE_OP)) { + if (walk_state->control_state->common.value) { + acpi_os_printf + ("Predicate = [True], IF block was executed\n"); + } else { + acpi_os_printf + ("Predicate = [False], Skipping IF block\n"); + } + } else if (op->common.aml_opcode == AML_ELSE_OP) { + acpi_os_printf + ("Predicate = [False], ELSE block was executed\n"); + } + + /* Restore everything */ + + op->common.next = next; + acpi_os_printf("\n"); + if ((acpi_gbl_db_output_to_file) || + (acpi_dbg_level & ACPI_LV_PARSE)) { + acpi_os_printf("\n"); + } + acpi_dbg_level = original_debug_level; + } + + /* If we are not single stepping, just continue executing the method */ + + if (!acpi_gbl_cm_single_step) { + return (AE_OK); + } + + /* + * If we are executing a step-to-call command, + * Check if this is a method call. + */ + if (acpi_gbl_step_to_next_call) { + if (op->common.aml_opcode != AML_INT_METHODCALL_OP) { + + /* Not a method call, just keep executing */ + + return (AE_OK); + } + + /* Found a method call, stop executing */ + + acpi_gbl_step_to_next_call = FALSE; + } + + /* + * If the next opcode is a method call, we will "step over" it + * by default. + */ + if (op->common.aml_opcode == AML_INT_METHODCALL_OP) { + + /* Force no more single stepping while executing called method */ + + acpi_gbl_cm_single_step = FALSE; + + /* + * Set the breakpoint on/before the call, it will stop execution + * as soon as we return + */ + walk_state->method_breakpoint = 1; /* Must be non-zero! */ + } + + status = acpi_db_start_command(walk_state, op); + + /* User commands complete, continue execution of the interrupted method */ + + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_initialize_debugger + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Init and start debugger + * + ******************************************************************************/ + +acpi_status acpi_initialize_debugger(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_initialize_debugger); + + /* Init globals */ + + acpi_gbl_db_buffer = NULL; + acpi_gbl_db_filename = NULL; + acpi_gbl_db_output_to_file = FALSE; + + acpi_gbl_db_debug_level = ACPI_LV_VERBOSITY2; + acpi_gbl_db_console_debug_level = ACPI_NORMAL_DEFAULT | ACPI_LV_TABLES; + acpi_gbl_db_output_flags = ACPI_DB_CONSOLE_OUTPUT; + + acpi_gbl_db_opt_no_ini_methods = FALSE; + + acpi_gbl_db_buffer = acpi_os_allocate(ACPI_DEBUG_BUFFER_SIZE); + if (!acpi_gbl_db_buffer) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + memset(acpi_gbl_db_buffer, 0, ACPI_DEBUG_BUFFER_SIZE); + + /* Initial scope is the root */ + + acpi_gbl_db_scope_buf[0] = AML_ROOT_PREFIX; + acpi_gbl_db_scope_buf[1] = 0; + acpi_gbl_db_scope_node = acpi_gbl_root_node; + + /* + * If configured for multi-thread support, the debug executor runs in + * a separate thread so that the front end can be in another address + * space, environment, or even another machine. + */ + if (acpi_gbl_debugger_configuration & DEBUGGER_MULTI_THREADED) { + + /* These were created with one unit, grab it */ + + status = acpi_os_acquire_mutex(acpi_gbl_db_command_complete, + ACPI_WAIT_FOREVER); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not get debugger mutex\n"); + return_ACPI_STATUS(status); + } + + status = acpi_os_acquire_mutex(acpi_gbl_db_command_ready, + ACPI_WAIT_FOREVER); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not get debugger mutex\n"); + return_ACPI_STATUS(status); + } + + /* Create the debug execution thread to execute commands */ + + status = acpi_os_execute(OSL_DEBUGGER_THREAD, + acpi_db_execute_thread, NULL); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "Could not start debugger thread")); + return_ACPI_STATUS(status); + } + } + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_initialize_debugger) + +/******************************************************************************* + * + * FUNCTION: acpi_terminate_debugger + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Stop debugger + * + ******************************************************************************/ +void acpi_terminate_debugger(void) +{ + + if (acpi_gbl_db_buffer) { + acpi_os_free(acpi_gbl_db_buffer); + acpi_gbl_db_buffer = NULL; + } + + /* Ensure that debug output is now disabled */ + + acpi_gbl_db_output_flags = ACPI_DB_DISABLE_OUTPUT; +} + +ACPI_EXPORT_SYMBOL(acpi_terminate_debugger) |