diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-h3.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-h3.c | 455 |
1 files changed, 0 insertions, 455 deletions
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c deleted file mode 100644 index 1e4c57710fcc..000000000000 --- a/arch/arm/mach-omap1/board-h3.c +++ /dev/null @@ -1,455 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-h3.c - * - * This file contains OMAP1710 H3 specific code. - * - * Copyright (C) 2004 Texas Instruments, Inc. - * Copyright (C) 2002 MontaVista Software, Inc. - * Copyright (C) 2001 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com - */ -#include <linux/gpio.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/major.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/errno.h> -#include <linux/workqueue.h> -#include <linux/i2c.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/platnand.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/spi/spi.h> -#include <linux/mfd/tps65010.h> -#include <linux/smc91x.h> -#include <linux/omapfb.h> -#include <linux/platform_data/gpio-omap.h> -#include <linux/platform_data/keypad-omap.h> -#include <linux/omap-dma.h> -#include <linux/leds.h> - -#include <asm/setup.h> -#include <asm/page.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "mux.h" -#include "flash.h" -#include "hardware.h" -#include "irqs.h" -#include "usb.h" -#include "common.h" -#include "board-h3.h" - -/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ -#define OMAP1710_ETHR_START 0x04000300 - -#define H3_TS_GPIO 48 - -static const unsigned int h3_keymap[] = { - KEY(0, 0, KEY_LEFT), - KEY(1, 0, KEY_RIGHT), - KEY(2, 0, KEY_3), - KEY(3, 0, KEY_F10), - KEY(4, 0, KEY_F5), - KEY(5, 0, KEY_9), - KEY(0, 1, KEY_DOWN), - KEY(1, 1, KEY_UP), - KEY(2, 1, KEY_2), - KEY(3, 1, KEY_F9), - KEY(4, 1, KEY_F7), - KEY(5, 1, KEY_0), - KEY(0, 2, KEY_ENTER), - KEY(1, 2, KEY_6), - KEY(2, 2, KEY_1), - KEY(3, 2, KEY_F2), - KEY(4, 2, KEY_F6), - KEY(5, 2, KEY_HOME), - KEY(0, 3, KEY_8), - KEY(1, 3, KEY_5), - KEY(2, 3, KEY_F12), - KEY(3, 3, KEY_F3), - KEY(4, 3, KEY_F8), - KEY(5, 3, KEY_END), - KEY(0, 4, KEY_7), - KEY(1, 4, KEY_4), - KEY(2, 4, KEY_F11), - KEY(3, 4, KEY_F1), - KEY(4, 4, KEY_F4), - KEY(5, 4, KEY_ESC), - KEY(0, 5, KEY_F13), - KEY(1, 5, KEY_F14), - KEY(2, 5, KEY_F15), - KEY(3, 5, KEY_F16), - KEY(4, 5, KEY_SLEEP), -}; - - -static struct mtd_partition nor_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data nor_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = nor_partitions, - .nr_parts = ARRAY_SIZE(nor_partitions), -}; - -static struct resource nor_resource = { - /* This is on CS3, wherever it's mapped */ - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nor_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_data, - }, - .num_resources = 1, - .resource = &nor_resource, -}; - -static struct mtd_partition nand_partitions[] = { -#if 0 - /* REVISIT: enable these partitions if you make NAND BOOT work */ - { - .name = "xloader", - .offset = 0, - .size = 64 * 1024, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "bootloader", - .offset = MTDPART_OFS_APPEND, - .size = 256 * 1024, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = 192 * 1024, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 2 * SZ_1M, - }, -#endif - { - .name = "filesystem", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - }, -}; - -#define H3_NAND_RB_GPIO_PIN 10 - -static int nand_dev_ready(struct nand_chip *chip) -{ - return gpio_get_value(H3_NAND_RB_GPIO_PIN); -} - -static struct platform_nand_data nand_platdata = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .nr_partitions = ARRAY_SIZE(nand_partitions), - .partitions = nand_partitions, - .options = NAND_SAMSUNG_LP_OPTIONS, - }, - .ctrl = { - .cmd_ctrl = omap1_nand_cmd_ctl, - .dev_ready = nand_dev_ready, - - }, -}; - -static struct resource nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nand_device = { - .name = "gen_nand", - .id = 0, - .dev = { - .platform_data = &nand_platdata, - }, - .num_resources = 1, - .resource = &nand_resource, -}; - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .start = OMAP1710_ETHR_START, /* Physical */ - .end = OMAP1710_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static void __init h3_init_smc91x(void) -{ - omap_cfg_reg(W15_1710_GPIO40); - if (gpio_request(40, "SMC91x irq") < 0) { - printk("Error requesting gpio 40 for smc91x irq\n"); - return; - } -} - -#define GPTIMER_BASE 0xFFFB1400 -#define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800)) -#define GPTIMER_REGS_SIZE 0x46 - -static struct resource intlat_resources[] = { - [0] = { - .start = GPTIMER_REGS(0), /* Physical */ - .end = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = INT_1610_GPTIMER1, - .end = INT_1610_GPTIMER1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device intlat_device = { - .name = "omap_intlat", - .id = 0, - .num_resources = ARRAY_SIZE(intlat_resources), - .resource = intlat_resources, -}; - -static struct resource h3_kp_resources[] = { - [0] = { - .start = INT_KEYBOARD, - .end = INT_KEYBOARD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data h3_keymap_data = { - .keymap = h3_keymap, - .keymap_size = ARRAY_SIZE(h3_keymap), -}; - -static struct omap_kp_platform_data h3_kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &h3_keymap_data, - .rep = true, - .delay = 9, - .dbounce = true, -}; - -static struct platform_device h3_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &h3_kp_data, - }, - .num_resources = ARRAY_SIZE(h3_kp_resources), - .resource = h3_kp_resources, -}; - -static struct platform_device h3_lcd_device = { - .name = "lcd_h3", - .id = -1, -}; - -static struct spi_board_info h3_spi_board_info[] __initdata = { - [0] = { - .modalias = "tsc2101", - .bus_num = 2, - .chip_select = 0, - .max_speed_hz = 16000000, - /* .platform_data = &tsc_platform_data, */ - }, -}; - -static const struct gpio_led h3_gpio_led_pins[] = { - { - .name = "h3:red", - .default_trigger = "heartbeat", - .gpio = 3, - }, - { - .name = "h3:green", - .default_trigger = "cpu0", - .gpio = OMAP_MPUIO(4), - }, -}; - -static struct gpio_led_platform_data h3_gpio_led_data = { - .leds = h3_gpio_led_pins, - .num_leds = ARRAY_SIZE(h3_gpio_led_pins), -}; - -static struct platform_device h3_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &h3_gpio_led_data, - }, -}; - -static struct platform_device *devices[] __initdata = { - &nor_device, - &nand_device, - &smc91x_device, - &intlat_device, - &h3_kp_device, - &h3_lcd_device, - &h3_gpio_leds, -}; - -static struct omap_usb_config h3_usb_config __initdata = { - /* usb1 has a Mini-AB port and external isp1301 transceiver */ - .otg = 2, - -#if IS_ENABLED(CONFIG_USB_OMAP) - .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ -#elif IS_ENABLED(CONFIG_USB_OHCI_HCD) - /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ - .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ -#endif - - .pins[1] = 3, -}; - -static const struct omap_lcd_config h3_lcd_config __initconst = { - .ctrl_name = "internal", -}; - -static struct i2c_board_info __initdata h3_i2c_board_info[] = { - { - I2C_BOARD_INFO("tps65013", 0x48), - }, - { - I2C_BOARD_INFO("isp1301_omap", 0x2d), - }, -}; - -static void __init h3_init(void) -{ - h3_init_smc91x(); - - /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped - * to address 0 by a dip switch), NAND on CS2B. The NAND driver will - * notice whether a NAND chip is enabled at probe time. - * - * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND - * (which on H2 may be 16bit) on CS3. Try detecting that in code here, - * to avoid probing every possible flash configuration... - */ - nor_resource.end = nor_resource.start = omap_cs3_phys(); - nor_resource.end += SZ_32M - 1; - - nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS; - nand_resource.end += SZ_4K - 1; - BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0); - gpio_direction_input(H3_NAND_RB_GPIO_PIN); - - /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ - /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ - omap_cfg_reg(V2_1710_GPIO10); - - /* Mux pins for keypad */ - omap_cfg_reg(F18_1610_KBC0); - omap_cfg_reg(D20_1610_KBC1); - omap_cfg_reg(D19_1610_KBC2); - omap_cfg_reg(E18_1610_KBC3); - omap_cfg_reg(C21_1610_KBC4); - omap_cfg_reg(G18_1610_KBR0); - omap_cfg_reg(F19_1610_KBR1); - omap_cfg_reg(H14_1610_KBR2); - omap_cfg_reg(E20_1610_KBR3); - omap_cfg_reg(E19_1610_KBR4); - omap_cfg_reg(N19_1610_KBR5); - - /* GPIO based LEDs */ - omap_cfg_reg(P18_1610_GPIO3); - omap_cfg_reg(MPUIO4); - - smc91x_resources[1].start = gpio_to_irq(40); - smc91x_resources[1].end = gpio_to_irq(40); - platform_add_devices(devices, ARRAY_SIZE(devices)); - h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO); - spi_register_board_info(h3_spi_board_info, - ARRAY_SIZE(h3_spi_board_info)); - omap_serial_init(); - h3_i2c_board_info[1].irq = gpio_to_irq(14); - omap_register_i2c_bus(1, 100, h3_i2c_board_info, - ARRAY_SIZE(h3_i2c_board_info)); - omap1_usb_init(&h3_usb_config); - h3_mmc_init(); - - omapfb_set_lcd_config(&h3_lcd_config); -} - -MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") - /* Maintainer: Texas Instruments, Inc. */ - .atag_offset = 0x100, - .map_io = omap16xx_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = h3_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END |