diff options
| -rw-r--r-- | Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml | 159 | ||||
| -rw-r--r-- | include/dt-bindings/soc/samsung,exynos-usi.h | 17 |
2 files changed, 176 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml new file mode 100644 index 000000000000..0af4821fae5e --- /dev/null +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung's Exynos USI (Universal Serial Interface) binding + +maintainers: + - Sam Protsenko <semen.protsenko@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C). + USI shares almost all internal circuits within each protocol, so only one + protocol can be chosen at a time. USI is modeled as a node with zero or more + child nodes, each representing a serial sub-node device. The mode setting + selects which particular function will be used. + + Refer to next bindings documentation for information on protocol subnodes that + can exist under USI node: + + [1] Documentation/devicetree/bindings/serial/samsung_uart.yaml + [2] Documentation/devicetree/bindings/i2c/i2c-exynos5.txt + [3] Documentation/devicetree/bindings/spi/spi-samsung.txt + +properties: + $nodename: + pattern: "^usi@[0-9a-f]+$" + + compatible: + enum: + - samsung,exynos850-usi # for USIv2 (Exynos850, ExynosAutoV9) + + reg: true + + clocks: true + + clock-names: true + + ranges: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + samsung,sysreg: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Should be phandle/offset pair. The phandle to System Register syscon node + (for the same domain where this USI controller resides) and the offset + of SW_CONF register for this USI controller. + + samsung,mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects USI function (which serial protocol to use). Refer to + <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values. + + samsung,clkreq-on: + type: boolean + description: + Enable this property if underlying protocol requires the clock to be + continuously provided without automatic gating. As suggested by SoC + manual, it should be set in case of SPI/I2C slave, UART Rx and I2C + multi-master mode. Usually this property is needed if USI mode is set + to "UART". + + This property is optional. + +patternProperties: + # All other properties should be child nodes + "^(serial|spi|i2c)@[0-9a-f]+$": + type: object + description: Child node describing underlying USI serial protocol + +required: + - compatible + - ranges + - "#address-cells" + - "#size-cells" + - samsung,sysreg + - samsung,mode + +if: + properties: + compatible: + contains: + enum: + - samsung,exynos850-usi + +then: + properties: + reg: + maxItems: 1 + + clocks: + items: + - description: Bus (APB) clock + - description: Operating clock for UART/SPI/I2C protocol + + clock-names: + items: + - const: pclk + - const: ipclk + + required: + - reg + - clocks + - clock-names + +else: + properties: + reg: false + clocks: false + clock-names: false + samsung,clkreq-on: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/samsung,exynos-usi.h> + + usi0: usi@138200c0 { + compatible = "samsung,exynos850-usi"; + reg = <0x138200c0 0x20>; + samsung,sysreg = <&sysreg_peri 0x1010>; + samsung,mode = <USI_V2_UART>; + samsung,clkreq-on; /* needed for UART mode */ + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peri 32>, <&cmu_peri 31>; + clock-names = "pclk", "ipclk"; + + serial_0: serial@13820000 { + compatible = "samsung,exynos850-uart"; + reg = <0x13820000 0xc0>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peri 32>, <&cmu_peri 31>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + hsi2c_0: i2c@13820000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x13820000 0xc0>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peri 32>, <&cmu_peri 31>; + clock-names = "hsi2c_pclk", "hsi2c"; + status = "disabled"; + }; + }; diff --git a/include/dt-bindings/soc/samsung,exynos-usi.h b/include/dt-bindings/soc/samsung,exynos-usi.h new file mode 100644 index 000000000000..a01af169d249 --- /dev/null +++ b/include/dt-bindings/soc/samsung,exynos-usi.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2021 Linaro Ltd. + * Author: Sam Protsenko <semen.protsenko@linaro.org> + * + * Device Tree bindings for Samsung Exynos USI (Universal Serial Interface). + */ + +#ifndef __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H +#define __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H + +#define USI_V2_NONE 0 +#define USI_V2_UART 1 +#define USI_V2_SPI 2 +#define USI_V2_I2C 3 + +#endif /* __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H */ |