hwmon: exynos4: move thermal sensor driver to driver/thermal directory

This movement is needed because the hwmon entries and corresponding sysfs
interface is a duplicate of utilities already provided by
driver/thermal/thermal_sys.c.  The goal is to place it in thermal folder
and add necessary functions to use the in-kernel thermal interfaces.

Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: SangWook Ju <sw.ju@samsung.com>
Cc: Durgadoss <durgadoss.r@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

3 files changed, 421 insertions, 0 deletions

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 996003b3438a..8f2b6eaf46b8 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -46,3 +46,10 @@ config RCAR_THERMAL
 	help
 	  Enable this to plug the R-Car thermal sensor driver into the Linux
 	  thermal framework
+
+config EXYNOS_THERMAL
+	tristate "Temperature sensor on Samsung EXYNOS"
+	depends on ARCH_EXYNOS4 && THERMAL
+	help
+	  If you say yes here you get support for TMU (Thermal Managment
+	  Unit) on SAMSUNG EXYNOS series of SoC.
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index aae59ad57c42..885550dc64b7 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_THERMAL)		+= thermal_sys.o
 obj-$(CONFIG_CPU_THERMAL)		+= cpu_cooling.o
 obj-$(CONFIG_SPEAR_THERMAL)		+= spear_thermal.o
 obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
+obj-$(CONFIG_EXYNOS_THERMAL)		+= exynos_thermal.o
diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
new file mode 100644
index 000000000000..556d15b4b029
--- /dev/null
+++ b/drivers/thermal/exynos_thermal.c
@@ -0,0 +1,413 @@
+/*
+ * exynos_thermal.c - Samsung EXYNOS TMU (Thermal Management Unit)
+ *
+ *  Copyright (C) 2011 Samsung Electronics
+ *  Donggeun Kim <dg77.kim@samsung.com>
+ *  Amit Daniel Kachhap <amit.kachhap@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/workqueue.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+
+#include <linux/platform_data/exynos_thermal.h>
+
+#define EXYNOS4_TMU_REG_TRIMINFO	0x0
+#define EXYNOS4_TMU_REG_CONTROL		0x20
+#define EXYNOS4_TMU_REG_STATUS		0x28
+#define EXYNOS4_TMU_REG_CURRENT_TEMP	0x40
+#define EXYNOS4_TMU_REG_THRESHOLD_TEMP	0x44
+#define EXYNOS4_TMU_REG_TRIG_LEVEL0	0x50
+#define EXYNOS4_TMU_REG_TRIG_LEVEL1	0x54
+#define EXYNOS4_TMU_REG_TRIG_LEVEL2	0x58
+#define EXYNOS4_TMU_REG_TRIG_LEVEL3	0x5C
+#define EXYNOS4_TMU_REG_PAST_TEMP0	0x60
+#define EXYNOS4_TMU_REG_PAST_TEMP1	0x64
+#define EXYNOS4_TMU_REG_PAST_TEMP2	0x68
+#define EXYNOS4_TMU_REG_PAST_TEMP3	0x6C
+#define EXYNOS4_TMU_REG_INTEN		0x70
+#define EXYNOS4_TMU_REG_INTSTAT		0x74
+#define EXYNOS4_TMU_REG_INTCLEAR	0x78
+
+#define EXYNOS4_TMU_GAIN_SHIFT		8
+#define EXYNOS4_TMU_REF_VOLTAGE_SHIFT	24
+
+#define EXYNOS4_TMU_TRIM_TEMP_MASK	0xff
+#define EXYNOS4_TMU_CORE_ON	3
+#define EXYNOS4_TMU_CORE_OFF	2
+#define EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET	50
+#define EXYNOS4_TMU_TRIG_LEVEL0_MASK	0x1
+#define EXYNOS4_TMU_TRIG_LEVEL1_MASK	0x10
+#define EXYNOS4_TMU_TRIG_LEVEL2_MASK	0x100
+#define EXYNOS4_TMU_TRIG_LEVEL3_MASK	0x1000
+#define EXYNOS4_TMU_INTCLEAR_VAL	0x1111
+
+struct exynos4_tmu_data {
+	struct exynos4_tmu_platform_data *pdata;
+	struct resource *mem;
+	void __iomem *base;
+	int irq;
+	struct work_struct irq_work;
+	struct mutex lock;
+	struct clk *clk;
+	u8 temp_error1, temp_error2;
+};
+
+/*
+ * TMU treats temperature as a mapped temperature code.
+ * The temperature is converted differently depending on the calibration type.
+ */
+static int temp_to_code(struct exynos4_tmu_data *data, u8 temp)
+{
+	struct exynos4_tmu_platform_data *pdata = data->pdata;
+	int temp_code;
+
+	/* temp should range between 25 and 125 */
+	if (temp < 25 || temp > 125) {
+		temp_code = -EINVAL;
+		goto out;
+	}
+
+	switch (pdata->cal_type) {
+	case TYPE_TWO_POINT_TRIMMING:
+		temp_code = (temp - 25) *
+		    (data->temp_error2 - data->temp_error1) /
+		    (85 - 25) + data->temp_error1;
+		break;
+	case TYPE_ONE_POINT_TRIMMING:
+		temp_code = temp + data->temp_error1 - 25;
+		break;
+	default:
+		temp_code = temp + EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET;
+		break;
+	}
+out:
+	return temp_code;
+}
+
+/*
+ * Calculate a temperature value from a temperature code.
+ * The unit of the temperature is degree Celsius.
+ */
+static int code_to_temp(struct exynos4_tmu_data *data, u8 temp_code)
+{
+	struct exynos4_tmu_platform_data *pdata = data->pdata;
+	int temp;
+
+	/* temp_code should range between 75 and 175 */
+	if (temp_code < 75 || temp_code > 175) {
+		temp = -ENODATA;
+		goto out;
+	}
+
+	switch (pdata->cal_type) {
+	case TYPE_TWO_POINT_TRIMMING:
+		temp = (temp_code - data->temp_error1) * (85 - 25) /
+		    (data->temp_error2 - data->temp_error1) + 25;
+		break;
+	case TYPE_ONE_POINT_TRIMMING:
+		temp = temp_code - data->temp_error1 + 25;
+		break;
+	default:
+		temp = temp_code - EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET;
+		break;
+	}
+out:
+	return temp;
+}
+
+static int exynos4_tmu_initialize(struct platform_device *pdev)
+{
+	struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
+	struct exynos4_tmu_platform_data *pdata = data->pdata;
+	unsigned int status, trim_info;
+	int ret = 0, threshold_code;
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	status = readb(data->base + EXYNOS4_TMU_REG_STATUS);
+	if (!status) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	/* Save trimming info in order to perform calibration */
+	trim_info = readl(data->base + EXYNOS4_TMU_REG_TRIMINFO);
+	data->temp_error1 = trim_info & EXYNOS4_TMU_TRIM_TEMP_MASK;
+	data->temp_error2 = ((trim_info >> 8) & EXYNOS4_TMU_TRIM_TEMP_MASK);
+
+	/* Write temperature code for threshold */
+	threshold_code = temp_to_code(data, pdata->threshold);
+	if (threshold_code < 0) {
+		ret = threshold_code;
+		goto out;
+	}
+	writeb(threshold_code,
+		data->base + EXYNOS4_TMU_REG_THRESHOLD_TEMP);
+
+	writeb(pdata->trigger_levels[0],
+		data->base + EXYNOS4_TMU_REG_TRIG_LEVEL0);
+	writeb(pdata->trigger_levels[1],
+		data->base + EXYNOS4_TMU_REG_TRIG_LEVEL1);
+	writeb(pdata->trigger_levels[2],
+		data->base + EXYNOS4_TMU_REG_TRIG_LEVEL2);
+	writeb(pdata->trigger_levels[3],
+		data->base + EXYNOS4_TMU_REG_TRIG_LEVEL3);
+
+	writel(EXYNOS4_TMU_INTCLEAR_VAL,
+		data->base + EXYNOS4_TMU_REG_INTCLEAR);
+out:
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static void exynos4_tmu_control(struct platform_device *pdev, bool on)
+{
+	struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
+	struct exynos4_tmu_platform_data *pdata = data->pdata;
+	unsigned int con, interrupt_en;
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	con = pdata->reference_voltage << EXYNOS4_TMU_REF_VOLTAGE_SHIFT |
+		pdata->gain << EXYNOS4_TMU_GAIN_SHIFT;
+	if (on) {
+		con |= EXYNOS4_TMU_CORE_ON;
+		interrupt_en = pdata->trigger_level3_en << 12 |
+			pdata->trigger_level2_en << 8 |
+			pdata->trigger_level1_en << 4 |
+			pdata->trigger_level0_en;
+	} else {
+		con |= EXYNOS4_TMU_CORE_OFF;
+		interrupt_en = 0; /* Disable all interrupts */
+	}
+	writel(interrupt_en, data->base + EXYNOS4_TMU_REG_INTEN);
+	writel(con, data->base + EXYNOS4_TMU_REG_CONTROL);
+
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+}
+
+static int exynos4_tmu_read(struct exynos4_tmu_data *data)
+{
+	u8 temp_code;
+	int temp;
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	temp_code = readb(data->base + EXYNOS4_TMU_REG_CURRENT_TEMP);
+	temp = code_to_temp(data, temp_code);
+
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+
+	return temp;
+}
+
+static void exynos4_tmu_work(struct work_struct *work)
+{
+	struct exynos4_tmu_data *data = container_of(work,
+			struct exynos4_tmu_data, irq_work);
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	writel(EXYNOS4_TMU_INTCLEAR_VAL, data->base + EXYNOS4_TMU_REG_INTCLEAR);
+
+	enable_irq(data->irq);
+
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+}
+
+static irqreturn_t exynos4_tmu_irq(int irq, void *id)
+{
+	struct exynos4_tmu_data *data = id;
+
+	disable_irq_nosync(irq);
+	schedule_work(&data->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
+{
+	struct exynos4_tmu_data *data;
+	struct exynos4_tmu_platform_data *pdata = pdev->dev.platform_data;
+	int ret;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform init data supplied.\n");
+		return -ENODEV;
+	}
+
+	data = kzalloc(sizeof(struct exynos4_tmu_data), GFP_KERNEL);
+	if (!data) {
+		dev_err(&pdev->dev, "Failed to allocate driver structure\n");
+		return -ENOMEM;
+	}
+
+	data->irq = platform_get_irq(pdev, 0);
+	if (data->irq < 0) {
+		ret = data->irq;
+		dev_err(&pdev->dev, "Failed to get platform irq\n");
+		goto err_free;
+	}
+
+	INIT_WORK(&data->irq_work, exynos4_tmu_work);
+
+	data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!data->mem) {
+		ret = -ENOENT;
+		dev_err(&pdev->dev, "Failed to get platform resource\n");
+		goto err_free;
+	}
+
+	data->mem = request_mem_region(data->mem->start,
+			resource_size(data->mem), pdev->name);
+	if (!data->mem) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "Failed to request memory region\n");
+		goto err_free;
+	}
+
+	data->base = ioremap(data->mem->start, resource_size(data->mem));
+	if (!data->base) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "Failed to ioremap memory\n");
+		goto err_mem_region;
+	}
+
+	ret = request_irq(data->irq, exynos4_tmu_irq,
+		IRQF_TRIGGER_RISING,
+		"exynos4-tmu", data);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
+		goto err_io_remap;
+	}
+
+	data->clk = clk_get(NULL, "tmu_apbif");
+	if (IS_ERR(data->clk)) {
+		ret = PTR_ERR(data->clk);
+		dev_err(&pdev->dev, "Failed to get clock\n");
+		goto err_irq;
+	}
+
+	data->pdata = pdata;
+	platform_set_drvdata(pdev, data);
+	mutex_init(&data->lock);
+
+	ret = exynos4_tmu_initialize(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize TMU\n");
+		goto err_clk;
+	}
+
+	exynos4_tmu_control(pdev, true);
+
+	return 0;
+err_clk:
+	platform_set_drvdata(pdev, NULL);
+	clk_put(data->clk);
+err_irq:
+	free_irq(data->irq, data);
+err_io_remap:
+	iounmap(data->base);
+err_mem_region:
+	release_mem_region(data->mem->start, resource_size(data->mem));
+err_free:
+	kfree(data);
+
+	return ret;
+}
+
+static int __devexit exynos4_tmu_remove(struct platform_device *pdev)
+{
+	struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
+
+	exynos4_tmu_control(pdev, false);
+
+	clk_put(data->clk);
+
+	free_irq(data->irq, data);
+
+	iounmap(data->base);
+	release_mem_region(data->mem->start, resource_size(data->mem));
+
+	platform_set_drvdata(pdev, NULL);
+
+	kfree(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4_tmu_suspend(struct device *dev)
+{
+	exynos4_tmu_control(to_platform_device(dev), false);
+
+	return 0;
+}
+
+static int exynos4_tmu_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	exynos4_tmu_initialize(pdev);
+	exynos4_tmu_control(pdev, true);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(exynos4_tmu_pm,
+			 exynos4_tmu_suspend, exynos4_tmu_resume);
+#define EXYNOS4_TMU_PM	(&exynos4_tmu_pm)
+#else
+#define EXYNOS4_TMU_PM	NULL
+#endif
+
+static struct platform_driver exynos4_tmu_driver = {
+	.driver = {
+		.name   = "exynos4-tmu",
+		.owner  = THIS_MODULE,
+		.pm     = EXYNOS4_TMU_PM,
+	},
+	.probe = exynos4_tmu_probe,
+	.remove	= __devexit_p(exynos4_tmu_remove),
+};
+
+module_platform_driver(exynos4_tmu_driver);
+
+MODULE_DESCRIPTION("EXYNOS4 TMU Driver");
+MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:exynos4-tmu");