staging: brcm80211: add fullmac driver

This patch to the existing bcm80211 directory in the staging tree adds fullmac
driver support for the BCM4329 SDIO chip from Broadcom.  Configuration of the
mac80211 driver or the fullmac driver can be done through menuconfig.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 161 insertions, 0 deletions

diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c b/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c
new file mode 100644
index 000000000000..bd044c1a17c4
--- /dev/null
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c
@@ -0,0 +1,161 @@
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <typedefs.h>
+#include <linuxver.h>
+#include <osl.h>
+#include <bcmutils.h>
+
+#include <dngl_stats.h>
+#include <dhd.h>
+
+#include <wlioctl.h>
+#include <wl_iw.h>
+
+#define WL_ERROR(x) printf x
+#define WL_TRACE(x)
+
+#ifdef CUSTOMER_HW
+extern void bcm_wlan_power_off(int);
+extern void bcm_wlan_power_on(int);
+#endif				/* CUSTOMER_HW */
+#ifdef CUSTOMER_HW2
+int wifi_set_carddetect(int on);
+int wifi_set_power(int on, unsigned long msec);
+int wifi_get_irq_number(unsigned long *irq_flags_ptr);
+#endif
+
+#if defined(OOB_INTR_ONLY)
+
+#if defined(BCMLXSDMMC)
+extern int sdioh_mmc_irq(int irq);
+#endif				/* (BCMLXSDMMC)  */
+
+#ifdef CUSTOMER_HW3
+#include <mach/gpio.h>
+#endif
+
+/* Customer specific Host GPIO defintion  */
+static int dhd_oob_gpio_num = -1;	/* GG 19 */
+
+module_param(dhd_oob_gpio_num, int, 0644);
+MODULE_PARM_DESC(dhd_oob_gpio_num, "DHD oob gpio number");
+
+int dhd_customer_oob_irq_map(unsigned long *irq_flags_ptr)
+{
+	int host_oob_irq = 0;
+
+#ifdef CUSTOMER_HW2
+	host_oob_irq = wifi_get_irq_number(irq_flags_ptr);
+
+#else				/* for NOT  CUSTOMER_HW2 */
+#if defined(CUSTOM_OOB_GPIO_NUM)
+	if (dhd_oob_gpio_num < 0)
+		dhd_oob_gpio_num = CUSTOM_OOB_GPIO_NUM;
+#endif
+
+	if (dhd_oob_gpio_num < 0) {
+		WL_ERROR(("%s: ERROR customer specific Host GPIO is NOT defined\n",
+			__func__));
+		return dhd_oob_gpio_num;
+	}
+
+	WL_ERROR(("%s: customer specific Host GPIO number is (%d)\n",
+		  __func__, dhd_oob_gpio_num));
+
+#if defined CUSTOMER_HW
+	host_oob_irq = MSM_GPIO_TO_INT(dhd_oob_gpio_num);
+#elif defined CUSTOMER_HW3
+	gpio_request(dhd_oob_gpio_num, "oob irq");
+	host_oob_irq = gpio_to_irq(dhd_oob_gpio_num);
+	gpio_direction_input(dhd_oob_gpio_num);
+#endif				/* CUSTOMER_HW */
+#endif				/* CUSTOMER_HW2 */
+
+	return host_oob_irq;
+}
+#endif				/* defined(OOB_INTR_ONLY) */
+
+/* Customer function to control hw specific wlan gpios */
+void dhd_customer_gpio_wlan_ctrl(int onoff)
+{
+	switch (onoff) {
+	case WLAN_RESET_OFF:
+		WL_TRACE(("%s: call customer specific GPIO to insert WLAN RESET\n",
+			__func__));
+#ifdef CUSTOMER_HW
+		bcm_wlan_power_off(2);
+#endif				/* CUSTOMER_HW */
+#ifdef CUSTOMER_HW2
+		wifi_set_power(0, 0);
+#endif
+		WL_ERROR(("=========== WLAN placed in RESET ========\n"));
+		break;
+
+	case WLAN_RESET_ON:
+		WL_TRACE(("%s: callc customer specific GPIO to remove WLAN RESET\n",
+			__func__));
+#ifdef CUSTOMER_HW
+		bcm_wlan_power_on(2);
+#endif				/* CUSTOMER_HW */
+#ifdef CUSTOMER_HW2
+		wifi_set_power(1, 0);
+#endif
+		WL_ERROR(("=========== WLAN going back to live  ========\n"));
+		break;
+
+	case WLAN_POWER_OFF:
+		WL_TRACE(("%s: call customer specific GPIO to turn off WL_REG_ON\n",
+			__func__));
+#ifdef CUSTOMER_HW
+		bcm_wlan_power_off(1);
+#endif				/* CUSTOMER_HW */
+		break;
+
+	case WLAN_POWER_ON:
+		WL_TRACE(("%s: call customer specific GPIO to turn on WL_REG_ON\n",
+			__func__));
+#ifdef CUSTOMER_HW
+		bcm_wlan_power_on(1);
+#endif				/* CUSTOMER_HW */
+		/* Lets customer power to get stable */
+		OSL_DELAY(200);
+		break;
+	}
+}
+
+#ifdef GET_CUSTOM_MAC_ENABLE
+/* Function to get custom MAC address */
+int dhd_custom_get_mac_address(unsigned char *buf)
+{
+	WL_TRACE(("%s Enter\n", __func__));
+	if (!buf)
+		return -EINVAL;
+
+	/* Customer access to MAC address stored outside of DHD driver */
+
+#ifdef EXAMPLE_GET_MAC
+	/* EXAMPLE code */
+	{
+		struct ether_addr ea_example = {
+			{0x00, 0x11, 0x22, 0x33, 0x44, 0xFF}};
+		bcopy((char *)&ea_example, buf, sizeof(struct ether_addr));
+	}
+#endif				/* EXAMPLE_GET_MAC */
+
+	return 0;
+}
+#endif				/* GET_CUSTOM_MAC_ENABLE */